Scribd
Upload
189 views

Implementing ITIL Using Track-It

ITIL provides guidance about creating and operating a Service Desk. Job of Service Desk is to provide effective Incident, Problem, and Change Management. Track-it's Help Desk module and Change Management module support ITIL processes.

Uploaded by

amwamb1
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
189 views

Implementing ITIL Using Track-It

ITIL provides guidance about creating and operating a Service Desk. Job of Service Desk is to provide effective Incident, Problem, and Change Management. Track-it's Help Desk module and Change Management module support ITIL processes.

Uploaded by

amwamb1
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Implementing ITIL Processes Using Numara Track-It!

2009 Numara Software, Inc.

Implementing ITIL Processes Using Track-It! (Overview)


Note: ITIL is a suggested best practice framework. The following instructions are recommended guidelines only. Each customer implementation may vary depending on ITIL interpretation and your organizations requirements. You can configure Track-It's Help Desk module and use the Change Management module to support the IT Infrastructure Library (ITIL ) incident, problem, and change management processes. This involves a few simple configuration changes in the Help Desk module and following a particular workflow between the Help Desk and Change Management modules. You can also use the Request Types defined below to create custom reports.

ITIL Definitions and Examples


ITIL provides guidance about creating and operating a Service Desk to provide efficient communication between the user community and the IT provider. The job of the Service Desk is to provide effective Incident, Problem, and Change management.

Service Request
A Service Request is a request from a User for information, advice, a standard change, or for access to an IT service. Service Requests are usually handled by a Service Desk, and do not require a Request for Change (RFC) to be submitted. Service Requests do not involve any failure in the IT Infrastructure. The objective of request fulfillment is to assist with general information and to provide a channel for users to request and receive standard services for which a pre-defined approval and qualification process exists. Translation: The Level 1 team handles these issues because they can be closed quickly and do not affect many customers. Examples: Requests for information, how to questions, and recurring requests for standard services.

Incident
An incident is an unplanned interruption of an IT service or a reduction in quality of an IT service. The objective of Incident Management is to restore normal service operation as quickly as possible and minimize the adverse impact on business operations. This ensures that the best possible levels of service quality and availability are maintained. Translation: The Level 1 team handles these issues because they can be closed quickly and do not affect many customers. Examples: Cannot send or receive e-mail, cannot access internet, or printer won't print.

Problem
A Problem is an unknown cause of one or more incidents. The objective of Problem Management is to prevent problems and resulting incidents from happening, to eliminate recurring incidents, and to minimize the impact of incidents that cannot be prevented. Translation: These are incidents that Level 1 support cannot handle or may be affecting many customers. (These are generally referred to as Problems before the cause is known, and Known Errors once the cause is determined.) Examples: Exchange server has crashed, network drive is down, or printer is damaged.

Request for Change


A Request for Change is a formal communication seeking an alteration to one or more configuration items. The objective of the Change Management process is to ensure that changes are recorded and then evaluated, authorized, prioritized, planned, tested, implemented, documented, and reviewed in a controlled manner. Translation: All IT-related changes that may affect one or many customers are tracked with Change Management. Examples: Adding memory to a computer, purchasing a new server, or installing the latest Windows operating system on computers.

Implementing ITIL Processes Using Track-It!

Configuring Track-It! for ITIL Processes


The following describes how to configure the Help Desk module to support ITIL processes. Follow the instructions in the Configuring Change Management Workflow topic so that the Incident or Problems enter the Change Management process where necessary.

Step 1: Set up Work Order Types


If you've already set up Work Order Types, you can use the existing Types, Subtypes, and Categories or create new classifications. For more information on Work Order Types, see Classifying the Work Order Issue in the Technicians Guide.

Step 2: Set up Work Order Notifications


Set up Work Order Notifications so that Technicians are automatically notified when a Work Order event occurs.

Step 3: Set up Skill Routing Policies


Skill Routing Policies allow you to assign specific Technicians to Work Orders based on their skill sets, which correspond to matching criteria on the Work Order fields.

Step 4: Set up Request Types


The following instructions describe how to set up a Work Order so that you can use a custom lookup table to classify types of requests (service request, incident, problem, and known error). To Create a Customized Lookup Field for Request Types: 1. 2. 3. 4. 5. From Track-It!'s main menu bar, select Tools > Administration Console > Lookup Tables > Help Desk. Select one of the Lookup Tables (Lookup#1 through #8). Click the Add button. In the Name text box on the User Lookup dialog, enter "Incident", then click the Save button. Repeat the steps above to enter the values "Problem" and Service Request.

To Change the Work Order's Field Label to "Request Type" and Set the Default to "Service Request": 1. 2. 3. 4. 5. Open a Work Order. Click in the Lookup Table field that you set up above, then press the CTRL+F2 keys. On the Field Options dialog, enter the "Request Type" in the Label field. To use "Service Request" as the default value that will automatically display in the field, enter it in the Default Value field. Click the OK button.

Now when a Work Order is created, the default Request Type will be set to Service Request

Step 5: Customize the Help Desk Grid View to Display the Request Type
This will enable you to quickly view the lists of Work Orders by Request Type. To Customize the Help Desk Grid View to Display Request Type: Note: You may need to exit re-start the Technician client to ensure your change to the Look Up field has been saved. 1. Right click anywhere on the grid, then select Customize. 2. In the Customize Grid dialog (Columns pane), select the Request Type, then click the Add button.

Implementing ITIL Processes Using Track-It!

ITIL Incident, Problem, and Change Workflow in Numara Track-It!


After the Help Desk and Change Management modules are configured to support ITIL processes, follow the example workflow below. In this example, Incidents relating to e-mail access will be created. Ultimately, it is determined that the Exchange Server needs a critical software update and is affecting many customers. A Problem and Request for Change will be created to resolve the issue.

Step 1: Create Work Orders and Classify Requests as Incidents


A Technician creates an Incident for a Users request indicating they are having trouble with their e-mail. Similar Incidents have also been created by other Technicians. 1. 2. 3. Create and populate the Work Order. Select the Classification Type, Subtype and Category. Select the Request Type "Incident". Save the Work Order.

Step 2: Create a New Work Order or Copy the Work Order and Define It as a Problem
Several e-mail related Incidents have now been created. It has been determined that the e-mail Incident is affecting multiple users and cannot be resolved quickly. The incident will now become a Problem and enter the Problem Management process. 1. 2. 3. 4. Create a new Work Order or copy one of the Incident Work Orders. Change the Subtype and/or Category as appropriate. Change the Request Type to Problem. Save the Work Order.

Step 3: Assign Incident Work Order(s) to Problem Work Order


In order to keep track of who is affected by the Problem and to ensure they are notified when the problem is resolved, Incidents should be associated to the Problem. When the Problem is closed, the assigned Incident Work Orders will also close. 1. 2. Make sure the Help Desk grid view is customized to show the Request Type column to easily determine which items are incidents. On the Help Desk grid, select the Incident Work Order and assign it to the Problem Work Order.

Step 4: Root Cause Requires Problem Work Order to Enter Change Management Process
The problem team determines that the Exchange Server needs a critical software update to resolve the e-mail Incident. The Problem is classified to reflect the needed software update which causes it to automatically enter the Change Management process. 1. 2. 3. Change the Subtype and/or Category as appropriate after the root cause is determined. If a Change Management policy is set up causing the Problem Work Order to automatically enter the Change Management process, a message will display. Click OK. To view details, click the Change Management tab on the Work Order.

Step 5: Final Decision on Request for Change Notification Received


Once the Request for Change has been approved, the Problem team can resolve the issue and the Problem Work Order can be closed. This will notify all users who created Incidents. 1. 2. Enter the resolution and any other information you want to add to the Problem Work Order. Because there are Assignments, when you attempt to change the Work Order's status to Closed, a message will display. Click Yes to close the parent Work Order and Assignments.

You might also like