FLAGON EP/PR XF

Technical Data Sheet N° WPSIT0307.a

COMPOSITION FEATURES
Synthetic membrane manufactured in TPO modified polyolefin, • Weatherproof and UV resistance
double colour sand-grey/black, obtained by co-extrusion, • Resistant to wind stress
reinforced by a polyester mesh. • Mechanical resistance and resistance to punching
The upper sand grey layer is featured by a very high resistance • Adaptability to structural movements
to weather and UV rays, while the underlying black layer is • Good flexibility at low temperatures
punching resistant.
Manufactured in a plant certified by UNI EN ISO 9001 (Quality AREAS OF USE
management system) and UNI EN ISO 14001 (environmental
management system). ROOFING
Laying performed by technicians approved by Soprema srl. • Exposed roof, with mechanical fastening system
Finishing and accessories composed by elements produced
and approved by Soprema srl.

PROPERTIES

EP/PR XF 1,20 EP/PR XF 1,50 EP/PR XF 1,80 EP/PR XF 2,00 Test method

Thickness (mm) 1,20 1,50 1,80 2,00 EN 1849-2

2
Weight (kg/m ) 1,35 1,65 2,00 2,23 EN 1849-2

Tensile strength (N/5cm) ≥ 1100 ≥ 1100 ≥ 1100 ≥ 1100 EN 12311-2

Elongation to break (%) ≥ 15 ≥ 15 ≥ 15 ≥ 15 EN 12311-2

Tear resistance (N) ≥ 300 ≥ 300 ≥ 300 ≥ 300 EN 12310-2

Resistance to impact (mm) ≥ 450 ≥ 800 ≥ 900 ≥ 1250 EN 12691

Cold bending (°C) ≤ - 35 ≤ - 35 ≤ - 35 ≤ - 35 EN 495-5

Hydrostatic pressure resistance

Waterproof waterproof waterproof waterproof EN 1928 met. B
(6 hours at 0,5 Mpa)

Dimensional stability (%) ≤ 0,5 ≤ 0,5 ≤ 0,5 ≤ 0,5 EN 1107-2

Resistance to artificial weathering (UV) no surface cracking no surface cracking no surface cracking no surface cracking EN 1297

Resistance to static punching (kg) ≥ 20 ≥ 20 ≥ 20 ≥ 20 EN 12730

EN ISO 11925-2 e
Fire resisteance (class) E E E E EN 13501-1

PRODUCTION STANDARD

Thickness 1,20 mm 1,50 mm 1,80 mm 2,00 mm

Width 1,05 m 2,10 m 1,05 m 2,10 m 1,05 m 2,10 m 1,05 m 2,10 m

Number of rolls on each pallet 46 23 46 23 36 18 36 18

Length 20 m 20 m 20 m 20 m

Colour (surface / underside) SAND GREY / BLACK

CE MARKING
Unique identification code of the product-type: WPSIT0307
FLAGON EP/PR XF membranes are produced by the company SOPREMA srl in Chignolo d’Isola (Italy) and are CE
marked no.1085-CPR-011 in accordance with EN 13956:2012.
Rev. 02.11.2021/EN

Due to its formulation, the liner is NOT subject to the requirements set forth in the CLP Regulation (EC) No 1272/2008 and EU n° 487/2013 and subsequent amendments on dangerous substances. If the product
should be disposed of as a waste, we recommend sending it to an authorised landfill site or to an incinerator equipped with post-combustion chamber and fumes washing system.
The data herewith indicated, apart from those required by EC branding, are not exhaustive and SOPREMA srl may modify them without previous notice. SOPREMA srl, has the right to modify the product at any time
and without previous notice, in any of its aspect, and to stop its production.
SOPREMA srl reserves the right, as technology and know-how progress, to modify without warning the composition and conditions of use of its materials, and subsequently their price. As a result, orders shall only
be accepted on the basis of the terms and technical specifications applicable at the time of receipt.
Italy: SOPREMA srl
Via Industriale dell’Isola, 3 – 24040 – Chignolo d’Isola (BG) - Italia
Tel. : +39 035 095.10.11 - Fax : +39 035 494.06.49
www.flag-on.com e-mail: [email protected]
www.soprema.it