Blasthole drill IDM30

Rotary and DTH drilling

 Selection of options on IDM30
Experience the Powerpack – The IDM30 power pack consists of an engine directly coupled to a
compressor providing necessary power to perform drilling functions. Each power
pack is mounted on its own sub base, which is, in turn mounted to the rig’s main

leadership in drilling
frame preventing drilling vibration to be transmitted to the power pack. The IDM30
new electronic engine with advanced technology has lower emissions and saves
up to 25% fuel. Refer technical specification table for the options.

Mast & carousel – The mast is a large steel structure with box section that loads
The Epiroc IDM30 drill is a crawler mounted, blasthole drill rig for down the hole and rotary all work forces absorbing maximum drilling stress. It carries the hydraulic motor
drilling popular in the most aggressive coal, limestone and iron ore mines. and chain feed system to provide sufficient pulldown force while drilling. A
selection of carousels for short and long mast helps to carry multiple drill pipes
for multi-pass drilling.
Features and benefits
• Centrally controlled hydraulic operation to load, • Uniform stable design provides gradeabilty
unload and breakout, along with carousel and rod up to 25% Auto guide drill rod centering – It is observed that in tough mining conditions,
drill pipes always gets off-set or bent slightly, making aligning the drill pipes a
centring system provides single man operations
• Clever design to keep load factor minimum that tedious job. Our new auto guide drill system is smartly designed to ensure the
• Single level platform is designed to give operators gives improved engine life drill pipes effectively maintain a straight line to drill string and rotation head
comfort to service the rig without getting down center axis.
• Complies to all DGMS requirements viz; safety
• Efficient hydraulic system with load sensing pumps items like FOPS certified cabin, mode selector,
reduce thermal cycle of oil that eventually saves propel interlock, audio visual alarm and track
the fuel guards are provided Drill efficiency indicator (DEI) – Our drill efficiency indicator system is capable
of providing accurate data of hole depth, rate of penetration, distance from the
bottom of the hole, accumulated depth and pipe-in-hole notification. This data
can be stored on computer for further analysis if driving productivity measures.

Auto fire suppression and detection system – This system provides protection
to the equipment from ABS fires. Consisting of pressurized nozzles located at
strategic locations, it operates in event of sudden fire and protects the drill rig.
The zonal system covers drill rig in two zones with efficient nozzles, and actuates
the system only in the zone where fire occurs to effectively suppress the fire in
short duration of time.

Centralized lubrication system – The centralized lubrication system delivers

controlled amounts of lubricant to multiple parts while the rig is operating,
reducing friction and wear and tear. It has a pneumatic pump which can be
operated from the cabin. A basic manual lubrication system can also be
provided, as per the requirement.

Water injection system – For efficient dust collection we have a separate

water injection system that can be mounted on the drill. The water injection
system offers a high pressure mist to supress the dust giving a cleaner working
environment at all times. The water tank can store 500 litres of water.

NVE dust collection system – Our non-visible emission dust collector is DGMS
approved. Mounted on the main frame near the drill table it collects dust and other
particles improving the quality of air released. It has a centrifugal blower which
creates suction pressure to absorb the dust and pass it through filters, this stops
majority dust particles before releasing the dust to the ground.
 Legal Notice © Copyright 2018, Epiroc Rock Drills AB, Garland, Texas. All product names in this publication are trademarks of Epiroc. Any unauthorized use or copying of the contents or any part thereof isprohibited.
Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc
Technical specifications
More selection of IDM30
options on IDM30 Drilling method
Hole diameter
Rotary and DTH mutipass
150-165 mm 6-6 1/2 in
Hydraulic pulldown 13,656 Kgf 30,000 Ibf
Auxiliary winch – The winch is provided to assist in Weight on bit 13,745 Kgf 30,240 Ibf

safe and efficient handling of drill pipes and other Single pass depth Standard mast 7.62 m 25 ft
Tall mast 9.98 m 32 ft
accessories.
Maximum hole depth 30 m (100 ft)
Rotary head torque 3.21 kNm 2,374 ft-lbs
Engine
Angle drilling package - The angle drill can drill in Cummins (LP Mechanical) 217 kW @ 1800 rpm 290 HP @ 1800 rpm
angle up to 20 degrees increments of 5 degrees. Cummins (HP Mechanical) 283 kW @ 1800 rpm 380 HP @ 1800 rpm
Cummins (LP Electronic) 242 kW @ 1800 rpm 325 HP @ 1800 rpm
Cummins (HP Mechanical) 357 kW @ 1800 rpm 480 HP @ 1800 rpm
Safety ladder with fall prevention – The safety Asymmetrical screw type
Compressor
ladder is guided with a safety belt arrangement to single stage
prevent the operator from falling. Low Pressure (LP) 17 m3/min / 7.03 Kg/cm2 600 cfm/100 psi
High Pressure (HP) 21 m3/min / 14.06 Kg/cm2 750 cfm/200 psi
High Pressure (HP) 25.48 m3/min /21.09 Kg/cm2 900 cfm/ 300 psi
Light package (LED or HID) – Advanced light Estimated weight 28 to 31 tones 61,600 to 68,200 Ibs

packages are provided to give the operators more Dimensions for

IDM30 standard mast
flux of light for night drilling. a) Length
Mast raised 8.95 m
Mast lowered 11.2 m

ATL system – This system automatically lubricates b) Width 4.2 m

c) Height
drill pipe threads reducing damage, improving
Mast raised 11.9 m
rod break, cuts down man power equipment and Mast lowered 4.9 m
releases stress on rotary system. Drill pipe specification
Drill pipe diameter Suggested bit diameter Thread
127 mm (5 inch) 150 to 165 mm (6-6 1/2 in) 5” BECO
Roller deck bushing – Provided in place of a
standard mechanical bushing to reduce the wear and
tear, keep the hole straight, and minimize friction and Standard scope items
transfer of rotation torque.
• FOPS Cabin with centralized controls
• Sturdy main frame and tower
Wiggins fast fill system – Fast filling and • Diesel powerpack with coolers and canopy
replenishment of operating fluids (fuel, hydraulic oil

Customer Center for specific information.

and compressor oil) from a centralized location. • Efficient feed system with rotation head
• Hydraulic breakout system
• Undercarriage track assembly
Air conditioned cabin – The operator cabin is FOPS
• Tower locking arrangement
certified protecting operators from falling rocks. The
air condition provides relatively low temperature • Hydraulically powered carousel
inside the cabin improving productivity. • Standard tools

United in performance.
Inspired by innovation.
Performance unites us, innovation inspires us, and
commitment drives us to keep moving forward.
Count on Epiroc to deliver the solutions you need to
succeed today and the technology to lead tomorrow.
epiroc.com