Mobilgear™ SHC XMP Series Page 1 of 3

Mobilgear™ SHC XMP Series

Mobil Industrial , United States
GEAR OIL

Product Description

Mobilgear™ SHC XMP Series High performance, synthetic industrial gear oils are designed to provide optimum equipment protection and oil life even
under extreme conditions. Mobil's polyalphaolefin (PAO) technology has been selected for its exceptional oxidation resistance and thermal properties,
naturally high viscosity index, excellent low temperature fluidity and absence of undesirable compounds that are often found in mineral oils. The high
viscosity index and low traction coefficient of this oil combine to help provide significant reduction in power consumption in many gear drives. Mobilgear
SHC XMP Series lubricants contain an advanced and carefully blended proprietary additive system designed to provide excellent protection against
conventional wear modes such as scuffing and provide a high level of resistance against micropitting fatigue. In addition, compared to conventional gear
oil chemistries, they offer the potential for improved lubrication of gearbox rolling element bearings. Mobilgear SHC XMP Series products offer
outstanding rust and corrosion protection in applications where salt water and acidic water protection are required. These products provide outstanding
filter life even when moderately wet and have excellent compatibility with ferrous and non-ferrous metals even at elevated temperatures.

Mobilgear SHC XMP lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are highly
recommended in applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. They
may also be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe.

Because of their unique mix of properties, including resistance to micropitting wear, and their performance in tough applications and wide temperature
range, Mobilgear SHC XMP Series products enjoy a growing reputation among customers and OEMs around the world.

Features and Benefits

The Mobil brand lubricants designated as SHC are recognized and appreciated around the world for innovation and outstanding performance. These
molecular design PAO synthetic products, pioneered by our research scientists, symbolize the continuing commitment to using advanced technology to
provide outstanding products. A key factor in the development of the Mobilgear SHC XMP Series was the close contacts between our scientists and
application specialists with key OEMs to ensure that our product offerings will provide exceptional performance with rapidly evolving industrial gear
designs and operation.
Our work with equipment builders has helped confirm the results from our own laboratory tests showing the exceptional performance of the Mobilgear
SHC XMP Series lubricants. Not least among the benefits shown in work with OEMs is the ability to resist micropitting wear which can occur with some
highly loaded, case-hardened gearing applications. This cooperative work also demonstrated the all-round balanced performance benefits for the new
Mobilgear SHC XMP technology, including a wide temperature range of application.
To address the issue of micropitting gear wear, our product formulation scientists designed a proprietary combination of additives which would resist
traditional gear wear mechanisms as well as protecting against micropitting. Our formulators chose proprietary PAO synthetic base oils to provide
exceptional oil life and deposit control and resistance to thermal/oxidative and chemical degradation, as well as the balance of the performance features.
The wax-free nature of the synthetic base oil also provides low temperature fluidity characteristics unmatched by mineral products and is a key benefit for
remote, low ambient, applications. The Mobilgear SHC XMP Series lubricants offer the following benefits:

Features Advantages and Potential Benefits

Superb protection from micropitting fatigue wear as well as high Extended gear and bearing life in enclosed gear drives operating under extreme
resistance to traditional scuffing wear conditions of load, speed and temperature

Reduced unexpected downtime and less maintenance - especially critical for

difficult to access gearboxes.

Extended oil life and drain intervals reduced oil consumption and manpower
Excellent resistance to degradation at high temperatures
costs

12.06.2024
Mobilgear™ SHC XMP Series Page 2 of 3

Features Advantages and Potential Benefits

Low traction PAO base stocks for improved gear efficiency Reduced energy consumption and lower operating temperatures

High viscosity index base stocks reduce viscosity change with Ability to operate at both high and low temperatures: especially critical in
temperature remote applications with no oil heating or cooling

Smooth, trouble-free operation at high temperatures or in water-contaminated

Excellent resistance to rust and corrosion and very good demulsibility
applications

Excellent compatibility with soft metals

Outstanding filter life, even in presence of water Fewer filter changes and reduced maintenance costs

Excellent compatibility with common gearbox materials of

Simple conversion from many mineral products
construction and with mineral-based gear oils

Applications

Application Considerations: While the Mobilgear SHC XMP Series are compatible with mineral oil based products, admixture may detract from their
performance. Consequently it is recommended that before changing a system to one of the Mobilgear SHC XMP Series, it should be thoroughly cleaned
out and flushed to achieve the maximum performance benefits.

Mobilgear SHC XMP Series supreme performance, fully synthetic industrial gear oils are designed to provide optimum equipment protection and oil life
even under extreme conditions. They are especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and
low temperature environments. Typical applications include:
• Wind turbines, especially highly loaded and shock loaded units, remotely located units and extreme temperature environments
• Plastic extruder gearboxes
• Modern, highly loaded gearboxes used in the paper, steel, oil, textile, lumber and cement industries where gear protection and optimum oil life are
required.

Specifications and Approvals

This product meets or exceeds the requirements of: 320 460

AGMA 9005-E02-EP X X

DIN 51517-3:2009-06 X X

Properties and Specifications

Property 320 460

Grade ISO VG 320 ISO VG 460

Density @ 15.6 C, kg/l, ASTM D4052 0.86 0.863

Emulsion, Time to 40/37/3, 82 C, min, ASTM D1401 10 10

FZG Micropitting, Fail Stage, Rating, FVA 54 10 10

12.06.2024
Mobilgear™ SHC XMP Series Page 3 of 3

Property 320 460

FZG Micropitting, GFT-Class, Rating, FVA 54 High High

FZG Scuffing, Fail Load Stage, A/16.6/90, ISO 14635-1(mod) 14+ 14+

Flash Point, Cleveland Open Cup, °C, ASTM D92 242 232

Foam, Sequence II, Stability, ml, ASTM D892 0 0

Foam, Sequence II, Tendency, ml, ASTM D892 0 0

Four-Ball Wear Test, Scar Diameter, 20 kg, 1800 rpm, 1 h, 50 C, mm, ASTM D4172 0.25

Four-Ball Wear Test, Scar Diameter, 20 kg, 1800 rpm, 1 h, 54 C, mm, ASTM D4172 0.25

ISO 4406 Cleanliness, class, ISO 4407 -/14/11

Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 38.3 48.7

Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 335 460

Pour Point, °C, ASTM D97 -38 -36

Rust Characteristics, Procedure B, ASTM D665 PASS PASS

Viscosity Index, ASTM D2270 164 166

Health and Safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com
/psims/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
05-2024

Exxon Mobil Corporation

22777 Springwoods Village Parkway
Spring TX 77389
1-800-ASK MOBIL (275-6624)
Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect
product performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to
change without notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit
www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is
intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local
ExxonMobil-affiliate entities.

© Copyright 2003-2024 Exxon Mobil Corporation. All

Rights Reserved

12.06.2024