This information may not, in whole or in part, be copied, photocopied,

reproduced, translated or reduced to any electronic medium or machine-

DATA SHEET readable form without the prior written consent of Hatteland Display AS.
The products may not be copied or duplicated in any way.

Manufacturer: Hatteland Display AS

Product: 19.0 inch Maritime Multi Display (MMD)

Last Revised: 23 Sep 2016
Type: JH 19T14 MMD-xxx-Axxx Revision#: 09

19.0 inch Maritime Multi Display (MMD) - Series 1

Features:
The Series 1 Maritime Multi Display (MMD) models are delivered with Multi-power (AC and DC
power input built in) ensuring that they are compatible with all power systems on all vessels. It will
automatically switch to whatever power is connected, making it highly flexible for shipbuilders and
system integrators alike.

Connections include DVI-I in, VGA out, VGA in, IEC inlet, IEC outlet and USB I/O. Signal input/
output options can be increased upon request by using the Multifunction Connector, which allows the
connection of many common signal types through a single cable connection, for common signals such
as; Composite Video Input, Touch Screen and Serial Communication. The models provide Picture-By-
Picture (PBP) and Picture-In-Picture (PIP) functionality.

The unit features LED Backlight Technology instead of traditional CCFL Backlighting which increases
the light intensity life time. Further, all models and variations can be offered with Optical Bonding
Technology that mitigates screen misting. By factory standards the unit is ECDIS Compliant. Single AC
model is also available.

FRONT VIEW SIDE VIEW BACK VIEW

Custom logo label:

WxH 181.66 x 44.16mm / 7.15" x 1.74"
R4.10 - 4 places

BOTTOM VIEW

PANEL CUTOUT
TOP VIEW

Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG file.

Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway

Tel: (+47) 4814 2200 - [email protected] - www.hatteland-display.com 1/2
 SPECIFICATIONS Note: All specifications are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.

TFT Technology: Physical Considerations:

• High Quality TFT with LED Backlight Technology • 483 (W) x 444 (H) x 82 (D) mm / 19.02" (W) x 17.48" (H) x 3.23" (D)
• 19.0 inch viewable image size, Aspect Ratio 5:4 • Weight: 11.50 kg (approx)
• TFT active-matrix liquid crystal panel
• MVA (Multi-domain Vertical Alignment) LCD Technology
Signal Terminals:
• DVI-I Signal IN : 1 x 29p DVI Female (or as VGA IN with adapter)
TFT Characteristics: • VGA Signal IN : 1 x 15p HD D-SUB (female)
• VGA Signal OUT : 1 x 15p HD D-SUB (female) - Clone of VGA IN**
• Native Resolution : 1280 x 1024
• Multifunction : 1 x 160p D-SUB (female) - Also see table below
• Pixel Pitch (RGB) : 0.294 (H) x 0.294 (V) mm
• USB I/O : 1 x TYPE B Conn. (female) Reserved for future use
• Response Time : 20ms (typical), “black” to “white”
• AC Power IN : 1 x Std IEC Inlet
• Contrast Ratio : 1500:1 (typical) • If AC Power OUT : 1 x Std IEC Outlet (5A Max)
• Light Intensity Standard : 350 cd/m² (typical) • If DC Power IN : 1 x 2p D-SUB Connector (male) - Amphenol FCC17
• Viewable Angle : +/- 85 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 376.32 (H) x 301.056 (V) mm **Tested at recommended resolutions. The VGA output signal is at same resolution and sync as the
VGA input. The output is working even if the display unit is turned off, but power cable/supply must
• Max Colors : 16.7 million be connected/provided.

Multifunction Cable:
Synchronisation:
Available factory standard cables, 30cm [11.81"] in length.
Sync Signal:
• Digital separate synchronisation • VSD100692-1 : 1 x 9P D-SUB (female) - RS-232 (COM1)
• Composite synchronisation • VSD100692-3 : 1 x 9P D-SUB (female) - RS-232 (COM1)
• Synchronisation on green. : 1 x 9P D-SUB (female) - RS-232 (COM Touch Screen)
• Auto detects VGA -> WUXGA, interlaced and non interlaced : 3 x BNC (female) (Composite Video in)
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm • VSD100692-4 : 1 x 9P D-SUB (female) - RS-232 (COM1)
: 3 x BNC (female) (Composite Video in)
Synchronisation Range: Customized cables are possible to support more built-in signals, like: RS-485, RS-422/
• Horizontal : 15,0 kHz to 91,1 kHz RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls,
• Vertical : 60 Hz* to 85 Hz Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths
can be manufactured.
* Recommended for optimum picture quality
User Controls:
Supported Signals: On front bezel - Keypad control (IP66) xxx-xxAx models:
Resolutions: • Power On/Off and On Screen Display Menu (push button)
• VGA : 640 x 480 (including 640 x 350) • Brightness Control (up/down - push buttons)
• SVGA : 800 x 600 (including 720 x 400) • Hotkeys (left/right - push buttons)
• XGA : 1024 x 768 • Mode Status Red/Green Illuminated LED-Ring Indicator
• SXGA : 1280 x 1024* On front bezel - Potmeter control (IP66) xxx-xxBx models:
• UXGA : 1600 x 1200 • Power On/Off and On Screen Display Menu (push button)
• WUXGA : 1920 x 1200 • Brightness Control (rotary control)
* Recommended for optimum picture quality. (60 Hz only) • Hotkeys (left/right - push buttons)
• Mode Status Red/Green Illuminated LED-Ring Indicator
Video Signals (with Multifunction Cable): • Speaker / Buzzer
• Interlaced NTSC and PAL/SECAM video
• Composite video Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C
Power Specifications: - Humidity up to 95%
Power Supply options: • Storage : Temperature -20 deg. C to +60 deg. C
• 115&230VAC - 50/60Hz + 24 VDC - JH 19T14 MMD-Mxx-Axxx* - Humidity up to 95%
• 115&230VAC - 50/60Hz - JH 19T14 MMD-Axx-Axxx • IP Rating : Protection (EN60529): IP66 front - IP20 rear
• Compass Safe Dist. : JH19T14MMD-xxx-xxxx - Std: 1.60m Steering: 1.05m
*Multi-Power: You may connect either AC power or DC power or both. In Lifetime Considerations:
case both sources are connected, power will be sourced from the AC input. Even although the test conditions for bridge units provide for a maximum
If AC input is lost, there will be a uninterrupted switch-over to DC input. operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
Power Consumption: 25°C. This is a necessary prerequisite for long life and low service costs.
Operating: 50W (TYP) - 60W (MAX)
Available Accessories:
• Cables = VSD100692-3, VSD100692-4 or customized cables.
• JH MMDBR STD-A1 = Bracket
• JH 19BRD STD-A1 = Mounting Bracket EN60945 Tested
• JH MMDRO STD-A1 = Rotary Bracket
• JH 19TSV STD-A1 = Sun Visor
• JH 19VED STD-A1 = Vesa Bracket
• JH 19TAP STD-A1 = 21" CRT Adapter frame
• JH 19TAP STD-B1 = 21" CRT Custom Adapter frame
• JH 19TAP STD-A2 = 20" TFT Adapter frame
• JH 19TWC STD-B1 = Water Cover
*Please see user manual for drawings/measurements.
Factory Options:
• Resistive* or Capacitive Touch Screen / Optical Bonding Technology*
*Note that all 19 inch with resistive touch screens can not be combined with bonding. • Color Calibrated models (ECDIS)

TESTING/APPROVALS & CERTIFICATES

This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) ClassNK - Nippon Kaiji Kyokai GL - Germanischer Lloyd DNV - Det Norske Veritas
ABS - American Bureau of Shipping BV - Bureau Veritas CCS - China Classification Society LRS - Lloyd’s Register of Shipping
EU RO MR - Mutual Recognition
2/2