UL证书

CERTIFICATE OF COMPLIANCE
Certificate Number 20181003-E324069

Report Reference E324069-20171122
Issue Date 2018-OCTOBER-03
Issued to: DALIAN TECHTRON CABLE LTD

3 THIRD MIDDLE HUAIHE RD
DALIAN ECONOMIC & TECHNICAL
DEVELOPMENT ZONE
DALIAN
LIAONING 116600 CHINA
This is to certify that COMPONENT - APPLIANCE WIRING MATERIAL

representative samples of Refer to Addendum Page for Models/Product.
Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.
Standard(s) for Safety: UL 758 Standard for Appliance Wiring Material.

Additional Information: See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Certification Mark should be considered as being covered by UL's
Certification and Follow-Up Service.
The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog
number, model number or other product designation as specified under “Marking” for the particular
Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products
that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark:
, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is
required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual
recognitions.
Recognized components are incomplete in certain constructional features or restricted in performance

capabilities and are intended for use as components of complete equipment submitted for investigation rather
than for direct separate installation in the field. The final acceptance of the component is dependent upon its
installation and use in complete equipment submitted to UL LLC.
Look for the UL Certification Mark on the product.
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 2
This is to certify that representative samples of the product as specified on this certificate were tested
according to the current UL requirements.
Models/Product
SINGLE-CONDUCTOR THERMOPLASTIC-INSULATED WIRE
STYLES - 1007, 1015, 1032, 1061, 1185, 1283, 1284, 1430, 1533, 1569, 1571, 1731, 10368, 10493,
10643, 10914, 10925, 11492, 11632, 11662, 11684,
UL LLC
Page 2 of 2
Issue Date 2018-SEPTEMBER-01

DEVELOPMENT ZONE, DALIAN

representative samples of SEE ADDENDUM PAGE FOR MODELS

Standard(s) for Safety: UL 758 Standard for Appliance Wiring Material

CSA C22.2 No. 210 Standard for Appliance Wiring Material
Products
recognitions.

UL LLC
Page 1 of 2
Models/Product:-
MULTI-CONDUCTOR THERMOPLASTIC-INSULATED WIRE
STYLES:- 2095, 2405, 2464, 2468, 2517, 2547, 2570, 2586, 2587, 2725, 2835, 2919, 20027, 20233,
20267, 20276, 20379, 20549, 21016, 21515, 21516.
UL LLC
Page 2 of 2




Products
recognitions.

UL LLC
Page 1 of 2
Models/Product:-
SINGLE-CONDUCTOR THERMOSETTING-INSULATED WIRE
STYLES:- 3385, 3386, 3443, 3688, 3817, 3994
UL LLC
Page 2 of 2




Products
recognitions.

UL LLC
Page 1 of 2
Models/Product:-
STYLES MULTI-CONDUCTOR THERMOSETTING-INSULATED WIRE
STYLES:- 4583
UL LLC
Page 2 of 2

DEVELOPMENT ZONE
DALIAN, LIAONING 116600 CHINA

representative samples of Refer to Addendum Page for Models/Product.

Standard(s) for Safety: UL 758 Standard for Appliance Wiring Material,

Products.
recognitions.

UL LLC
Page 1 of 2
Models/Product
CNR: Appliance Wire, Extruded PVC Insulated Singles, Class I, Group A, B, or A/B.
Extruded XLPE Insulated Singles, Class I, Group A, B, or A/B.
Extruded XLPE, Multiconductor Flat Ribbon Cable, Class I, Group A, B, or A/B.
Single or Multiconductor cable with extruded PVC non-integral jacket, Class I, Class II, or Class I/II,
Group A, B or A/B.
Extruded PVC, Multiconductor Flat Ribbon Cable, Class I, Group A, B, or A/B.
Extruded SRPVC Insulated Singles, Class I, Group A, B, or A/B.
Extruded PP Insulated Singles for further processing in jacketed cable.
Extruded XLPVC Insulated Singles, Class I, Group A, B, or A/B.
Single or Multi-conductor cable with extruded TPU non-integral jacket, Class I, Class II, or Class I/II,
Group A, B, or A/B.
Extruded mPPE, Multiconductor Flat Ribbon Cable, Class I, Group A, B, or A/B.
Extruded Foamed PE Insulated Singles for further processing in jacketed cable.
Extruded LDPE Insulated Singles for further processing in jacketed cable.
Single or Multi-conductor cable with extruded XLPE non-integral jacket, Class I, Class II, or Class I/II,
Group A, B, or A/B.
Extruded TPE Insulated Single, Class I, Group A, B, or A/B.
UL LLC
Page 2 of 2

UL证书

Uploaded by

Copyright:

Available Formats

UL证书

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

UL证书

Uploaded by

Copyright:

Available Formats

CERTIFICATE OF COMPLIANCE

Certificate Number 20181003-E324069

Issued to: DALIAN TECHTRON CABLE LTD

This is to certify that COMPONENT - APPLIANCE WIRING MATERIAL

Have been investigated by UL in accordance with the

Standard(s) for Safety: UL 758 Standard for Appliance Wiring Material.

Recognized components are incomplete in certain constructional features or restricted in performance

Look for the UL Certification Mark on the product.

Bruce Mahrenholz, Director North American Certification Program

SINGLE-CONDUCTOR THERMOPLASTIC-INSULATED WIRE

Bruce Mahrenholz, Director North American Certification Program

Issued to: DALIAN TECHTRON CABLE LTD

This is to certify that COMPONENT - APPLIANCE WIRING MATERIAL

Have been investigated by UL in accordance with the

Standard(s) for Safety: UL 758 Standard for Appliance Wiring Material

Recognized components are incomplete in certain constructional features or restricted in performance

Look for the UL Certification Mark on the product.

Bruce Mahrenholz, Director North American Certification Program

MULTI-CONDUCTOR THERMOPLASTIC-INSULATED WIRE

Bruce Mahrenholz, Director North American Certification Program

Issued to: DALIAN TECHTRON CABLE LTD

This is to certify that COMPONENT - APPLIANCE WIRING MATERIAL

Have been investigated by UL in accordance with the

Standard(s) for Safety: UL 758 Standard for Appliance Wiring Material

Recognized components are incomplete in certain constructional features or restricted in performance

Look for the UL Certification Mark on the product.

Bruce Mahrenholz, Director North American Certification Program

SINGLE-CONDUCTOR THERMOSETTING-INSULATED WIRE

STYLES:- 3385, 3386, 3443, 3688, 3817, 3994

Bruce Mahrenholz, Director North American Certification Program

Issued to: DALIAN TECHTRON CABLE LTD

This is to certify that COMPONENT - APPLIANCE WIRING MATERIAL

Have been investigated by UL in accordance with the

Standard(s) for Safety: UL 758 Standard for Appliance Wiring Material

Recognized components are incomplete in certain constructional features or restricted in performance

Look for the UL Certification Mark on the product.

Bruce Mahrenholz, Director North American Certification Program

STYLES MULTI-CONDUCTOR THERMOSETTING-INSULATED WIRE

Bruce Mahrenholz, Director North American Certification Program

Issued to: DALIAN TECHTRON CABLE LTD

This is to certify that COMPONENT - APPLIANCE WIRING MATERIAL

Have been investigated by UL in accordance with the

Standard(s) for Safety: UL 758 Standard for Appliance Wiring Material,

Recognized components are incomplete in certain constructional features or restricted in performance

Look for the UL Certification Mark on the product.

Bruce Mahrenholz, Director North American Certification Program

Extruded XLPE Insulated Singles, Class I, Group A, B, or A/B.

Extruded XLPE, Multiconductor Flat Ribbon Cable, Class I, Group A, B, or A/B.

Extruded PVC, Multiconductor Flat Ribbon Cable, Class I, Group A, B, or A/B.

Extruded SRPVC Insulated Singles, Class I, Group A, B, or A/B.

Extruded PP Insulated Singles for further processing in jacketed cable.

Extruded XLPVC Insulated Singles, Class I, Group A, B, or A/B.

Extruded mPPE, Multiconductor Flat Ribbon Cable, Class I, Group A, B, or A/B.

Extruded Foamed PE Insulated Singles for further processing in jacketed cable.

Extruded LDPE Insulated Singles for further processing in jacketed cable.

Extruded TPE Insulated Single, Class I, Group A, B, or A/B.

Bruce Mahrenholz, Director North American Certification Program

You might also like