Scribd
Upload
102 views25 pages

Packetmaster EX6 Web GUI

Uploaded by

Amy Li
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views25 pages

Packetmaster EX6 Web GUI

Uploaded by

Amy Li
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 25

Packetmaster EX6

WEB GUI
Training / Manual
High Performance
Desktop Network Packet Broker

V1.1 2015-07-24
Content
 This training is intended to enable users of the
CUBRO Packetmaster to deploy and manage it via
Web GUI.
 The Web GUI is designed to work with all standard
web browsers such as
 Microsoft Internet Explorer
 Mozilla Firefox
 Google Chrome
 …
 Note:
The Web GUI does not support all features of the EX6. Some
functions are available via CLI only.
Default Configuration – EX6
 Management Interface  Web Login
 IP: 192.168.0.200  No user and password
 Mask: 255.255.255.0
required; can be
 GW: 192.168.0.1
changed in the Web
 Port Setup GUI
 Port 1 to 48: Autoneg ON
 Port 49 to 52: 10G  CLI Login
 Default Flows/Filters  User: root
 None  Password: fucik1
Ports

Ethernet
Management I/F
for web GUI or ssh
connection;
Default IP is
192.168.0.200/24

Ports #1 to #48: Ports #49 to #52:


Supporting 10M/100M/1000M SFP+ Ports for 10G
(dep. on SFP)

In the Web GUI under „Ports“ – „Port Status“ each defined Port including its port
number can be viewed.
Connection to EX6
 Connect to your CUBRO Packetmaster EX via the
Management Interface

 Enter the IP of the Packetmaster in your web


browser (Factory default: 192.168.0.200)

The Packetmaster will automatically start up with the Rule Table (empty on first bootup)
Web GUI Start-up Screen
Rule Table
 After login the Web GUI shows the active
rules – Rule Table
Entering Rules 1
 Press „Add Rule“ tab to enter new rules
User selectable name to identify the
rule easily

Priority of the
rule, higher
priority matches
first
Priority
 The Cubro Packetmaster does not allow to
handle an incoming packet twice. So once a
rule matches the packet is processed and
there is no 2nd chance to access this packet.

 The priority field is a way to stack up rules.


The priority value can be anything between
0 and 65535. A higher value will match
before a lower one.
Entering Rules 2
 Enter values for rules

Select ports to apply rules


Separator e.g. 1,3 Ranges e.g. 2-4

Multiple VLANs and ranges possible

Leave empty if no filter on an


attribute is desired

Choosing protocol type opens the


relevant options for the specific choice

IP masks are entered in CIDR notation (1-32)


Entering Rules 3
Drops matching traffic

Selects output ports for matching packets


Separator e.g. 1,3 Ranges e.g. 2-4

Mirrors traffic from input to output of port


Adds VLAN

Changes VLAN to desired value


Removes VLAN

Adds MPLS label

Modifies IP Destination Address

Modifies MAC Source and Destination Address

Modifies Source and Destination Port Number


Entering Rules 4
 Press Add Rule
 On top of the screen „Rule added successfully“
Rule Table 1
 Press „Rule Table“ to display all rules
Rule Table 2
 Handling Rules

Hides/Unhides columns Saves rules to memory. Deletes all active Resets all counters
e.g. Rules are restored after rules. in Rule Table
reboot. Overwrites
previously stored rules in Stored rules are
memory! not deleted!

 Editing/Copying/Deleting Rules
Edit rule (only Output Actions can be edited)

Create new rule using the current one as basis

Delete this rule


Rule Handling – Rule Im-/Export

Downloads all active Loads rules from Adds saved rules to


Downloads saved
rules to local file saved file active rules.
rules to local file
”activerules.txt” Active rules are not
“savedrules.txt”
deleted.

 Deleting saved rules


 In „Rule Table“ press →
or
 In „Rule Export“ empty textbox for saved rules,
press
Rule Export 2
 Saved Rules can be edited in the textbox. This does NOT
effect the active rules.
In order to activate these rules press
 Rules are added to active rules, they do not replace them
Rule Handling – Templates
 Templates allow to use pre-defined flow/filter
configurations.
Port Statistics
 Port Statistics can be viewed and reset
Port Status
 Displays current status for all ports
Port Configuration

Interface numbering according to


front panel of the unit

Select duplex Mode

Select port speed

Activate/Deactivate port
Device - IP Configuration
 Configure Management Interface

Set configuration for management interface


When settings are changed the browser
automatically connects to the new IP address
Device – Device Info
 Allows setting Device Name and Notes
 Set Username and password for Web GUI
 Activation of Make rules permanent
 Read-out of transceiver information
 Reset all counters

Direct link to latest software –


download to PC and save locally
Device – Device Info
Make rules permanet
 By default the Add Rule button will send the rules from the PC
to the packetmaster but the rules are save temporarily only.
After reboot temporary rules are deleted and only permanent
rules are available after a reboot.
 By enabling the checkbox „Make active rules permanent on
Add Rule“ the Add Rule button will immediately save the rule
to the memory and these rules will be available after a reboot.

 By default the checkbox is NOT set


Device - Device Info
 Pressing displays Transceiver Details
• Vendor
• Product number
• Wavelength
• max. Link length
• Thresholds
• Alarms
• Temperature
• Voltage
• Current
• Optical Power Tx
• Optical Power Rx
Device - Firmware Upgrades
 Easily upgrade Packetmaster Firmware

Click here and select update file


Support and Questions

EMEA North America APAC

Cubro Acronet GesmbH Cubro US Cubro Singapore


Geiselbergstr. 17/6.OG 337 West Chocolate Ave
1110 Vienna Hershey, PA 17033
Austria
Tel.:+1-717-576-9050 Tel.: +65-97255386
Tel.: +43-1-29826660 Fax.: +1-866-735-9232
Fax: +43-1-2982666399
Sam Reed Joe
Email: Email: [email protected] Email: [email protected]
[email protected]

The information contained in this presentation is for general information purposes only. We endeavor to keep the information
up to date and correct, we make no representations or warranties of any kind or availability with respect to the presentation
or the information, products, or related content contained on the presentation for any purpose.

You might also like