SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017,

ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006

TRESCAL, INC.
554 NW 77th St
Boca Raton, FL 33487
Nathan Thrasher Phone: 561 999 1896

CALIBRATION

Valid To: November 30, 2024 Certificate Number: 1877.02

In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to
this laboratory to perform the following calibrations1, 7:

I. Dimensional

Parameter/Equipment Range CMC2 (±) Comments

Micrometers3

Spindle Linearity Up to 48 in 16 µin + 5.5 µin/in Gage blocks

Length Indicators3 Up to 1 in 74 µin Starrett 716 dial

(Drop, Test, LVDTs) indicator calibrator

Height Gages3 Up to 24 in 19 µin + 5.6 µin/in Gage blocks, surface

plate

Calipers3

Outside Diameter Up to 48 in 30 µin + 5.2 µin/in Gage blocks

Step & Depth 31 µin + 5.2 µin/in

(A2LA Cert. No. 1877.02) 05/31/2023 Page 1 of 34

II. Electrical – DC/Low Frequency

Parameter/Equipment Range CMC2, 4, 5, 6 (±) Comments

DC Voltage – Generate3 (0 to 330) mV 0.8 µV + 16 nV/mV Fluke 5520A

330 mV to 3.3 V 17 µV + 5 µV/V
(3.3 to 33) V 88 µV + 7 µV/V
(33 to 330) V 0.56 mV + 14 µV/V
(330 to 1000) V 2.7 mV + 14 µV/V

DC Voltage – Measure Up to 100 mV 0.33 µV + 17 µV/V Agilent 3458A

(0.1 to 1) V 0.52 µV + 8 µV/V
(1 to 10) V 8.8 µV + 8.1 µV/V
(10 to 100) V 35 µV + 10 µV/V
(100 to 1000) V 1.2 mV + 11 µV/V

DC High Voltage – (1 to 20) kV 2.3 % Fluke 80K-40, Agilent

Measure (20 to 35) kV 1.2 % 34401A
(35 to 40) kV 2.3 %

DC Current – Generate3 (0 to 330) µA 16 nA + 0.12 nA/µA Fluke 5520A

330 µA to 3.3 mA 41 nA + 80 nA/mA
(3.3 to 33) mA 0.21 µA + 80 nA/mA
(33 to 330) mA 2.1 µA + 80 nA/mA
330 mA to 1.1 A 33 µA + 0.16 mA/A
(1.1 to 3.0) A 0.37 mA + 0.13 mA/A
(3 to 11) A 0.49 mA + 0.39 mA/A
(11 to 20.5) A 9.4 mA + 0.8 mA/A

DC Clamp Meters (10 to 16.5) A 50 mA + 6.5 mA/A Fluke 5520A w/ 5500

(16.5 to 150) A 0.18 A + 3.4 mA/A coil
(150 to 1025) A 0.83 A + 3.3 mA/A

DC Current – Measure (0 to 100) nA 41 pA + 89 µA/A Agilent 3458A

(0.1 to 1) µA 70 pA + 21 µA/A
(1 to 10) µA 0.7 nA + 18 µA/A
(10 to 100) µA 5.8 nA + 9.2 µA/A
(0.1 to 1) mA 58 nA + 9.7 µA/A
(1 to 10) mA 0.58 µA + 8 µA/A
(10 to 100) mA 5.8 µA + 17 µA/A
(0.1 to 1) A 59 µA + 81 µA/A

(1 to 2) A 30 µA + 0.17 mA/A Fluke 8508A

(2 to 20) A 3.9 mA + 0.26 mA/A

(A2LA Cert. No. 1877.02) 05/31/2023 Page 2 of 34

 Parameter/Equipment Range CMC2, 4, 6 (±) Comments

DC Resistance – (0 to 10.9999) Ω 1.2 mΩ + 24 µΩ/Ω Fluke 5520A

Generate (11 to 32.9999) Ω 1.5 mΩ + 24 µΩ/Ω
(33 to 109.9999) Ω 1.9 mΩ + 22 µΩ/Ω
(110 to 329.9999) Ω 4.1 mΩ + 22 µΩ/Ω
(330 to 1099.999) Ω 9.1 mΩ + 22 µΩ/Ω
(1.1 to 3.299 999) kΩ 41 mΩ + 22 µΩ/Ω
(3.3 to 10.999 99) kΩ 92 mΩ + 22 µΩ/Ω
(11 to 32.999 99) kΩ 0.41 Ω + 22 µΩ/Ω
(33 to 109.9999) kΩ 0.9 Ω + 22 µΩ/Ω
(110 to 329.9999) kΩ 8.4 Ω + 26 µΩ/Ω
(330 to 1099.999) kΩ 14 Ω + 26 µΩ/Ω
(1.1 to 3.299 999) MΩ 93 Ω + 48 µΩ/Ω
(3.3 to 10.999 99) MΩ 0.4 kΩ + 0.1 mΩ/Ω
(11 to 32.999 99) MΩ 4.4 kΩ + 0.2 mΩ/Ω
(33 to 109.9999) MΩ 16 kΩ + 0.4 mΩ/Ω
(110 to 329.9999) MΩ 0.35 MΩ + 2.4 mΩ/Ω
(330 to 1100) MΩ 4.4 MΩ + 12 mΩ/Ω

DC Resistance – (0 to 10) Ω 55 µΩ + 15 µΩ/Ω Agilent 3458A

Measure (10 to 100) Ω 0.52 mΩ + 13 µΩ/Ω
(0.1 to 1) kΩ 0.53 mΩ + 10 µΩ/Ω
(1 to 10) kΩ 5.3 mΩ + 10 µΩ/Ω
(10 to 100) kΩ 53 mΩ + 11 µΩ/Ω
(0.1 to 1) MΩ 2.3 Ω + 17 µΩ/Ω
(1 to 10) MΩ 0.1 kΩ + 55 µΩ/Ω
(10 to 100) MΩ 1 kΩ + 0.52 mΩ/Ω
(0.1 to 1) GΩ 10 kΩ + 5.1 mΩ/Ω

(1 to 2) GΩ 1.2 MΩ + 1.4 mΩ/Ω Fluke 8508A

(2 to 20) GΩ 12 MΩ + 1.4 mΩ/Ω

(A2LA Cert. No. 1877.02) 05/31/2023 Page 3 of 34

 Parameter/Equipment Range CMC2, 6 (±) Comments

Electrical Calibration of
Thermocouple Generate
& Measure –

Type E (-200 to -100) ºC 0.39 °C Fluke 5520A

(-100 to -25) ºC 0.13 °C
(-25 to 350) ºC 0.12 °C
(350 to 650) ºC 0.13 °C
(650 to 1000) ºC 0.17 °C

Type J (-210 to -100) ºC 0.21 °C

(-100 to -30) ºC 0.13 °C
(-30 to 150) ºC 0.12 °C
(150 to 760) ºC 0.14 °C
(760 to 1200) ºC 0.18 °C

Type K (-200 to -100) ºC 0.26 °C

(-100 to -25) ºC 0.15 °C
(-25 to 120) ºC 0.13 °C
(120 to 1000) ºC 0.21 °C
(1000 to 1372) ºC 0.31 °C

Type N (-200 to -100) ºC 0.31 °C

(-100 to -25) ºC 0.18 °C
(-25 to 120) ºC 0.15 °C
(120 to 410) ºC 0.15 °C
(410 to 1300) ºC 0.21 °C

Type R (0 to 250) ºC 0.44 °C

(250 to 400) ºC 0.28 °C
(400 to 1000) ºC 0.26 °C
(1000 to 1767) ºC 0.31 °C

Type S (0 to 250) ºC 0.37 °C

(250 to 1000) ºC 0.28 °C
(1000 to 1400) ºC 0.29 °C
(1400 to 1767) ºC 0.36 °C

Type T (-250 to -150) ºC 0.49 °C

(-150 to 0) ºC 0.21 °C
(0 to 120) ºC 0.15 °C
(120 to 400) ºC 0.14 °C

(A2LA Cert. No. 1877.02) 05/31/2023 Page 4 of 34

 Parameter/Equipment Range CMC2, 6 (±) Comments

Electrical Simulation of
RTD Indicators3–

Pt 385, 100 Ω (-200 to -80) °C 0.057 °C Fluke 5520A

(-80 to 0) °C 0.056 °C
(0 to 100) °C 0.068 °C
(100 to 300) °C 0.081 °C
(300 to 400) °C 0.088 °C
(400 to 630) °C 0.10 °C
(630 to 800) °C 0.19 °C

Pt 385, 200 Ω (-200 to -80) °C 0.051 °C

(-80 to 0) °C 0.051 °C
(0 to 100) °C 0.051 °C
(100 to 260) °C 0.057 °C
(260 to 300) °C 0.10 °C
(300 to 400) °C 0.11 °C
(400 to 600) °C 0.12 °C
(600 to 630) °C 0.13 °C

Pt 385, 500 Ω (-200 to -80) °C 0.051 °C

(-80 to 0) °C 0.056 °C
(0 to 100) °C 0.056 °C
(100 to 260) °C 0.062 °C
(260 to 300) °C 0.074 °C
(300 to 400) °C 0.074 °C
(400 to 600) °C 0.081 °C
(600 to 630) °C 0.095 °C

Pt 385, 1000 Ω (-200 to -80) °C 0.047 °C

(-80 to 0) °C 0.047 °C
(0 to 100) °C 0.051 °C
(100 to 260) °C 0.057 °C
(260 to 300) °C 0.062 °C
(300 to 400) °C 0.068 °C
(400 to 600) °C 0.068 °C
(600 to 630) °C 0.18 °C

(-200 to -190) °C 0.20 °C

Pt 3916, 100 Ω (-190 to -80) °C 0.051 °C
(-80 to 0) °C 0.056 °C
(0 to 100) °C 0.062 °C
(100 to 260) °C 0.068 °C
(260 to 300) °C 0.074 °C
(300 to 400) °C 0.081 °C
(400 to 600) °C 0.041 °C
(600 to 630) °C 0.18 °C

(A2LA Cert. No. 1877.02) 05/31/2023 Page 5 of 34

 Parameter/Equipment Range CMC2, 6 (±) Comments

Electrical Simulation of
RTD Indicators3 – (cont)

Pt 3926, 100 Ω
(-200 to -80) °C 0.056 °C Fluke 5520A
(-80 to 0) °C 0.056 °C
(0 to 100) °C 0.068 °C
(100 to 300) °C 0.081 °C
(300 to 400) °C 0.088 °C
(400 to 630) °C 0.10 °C
PtNi 385, 120 Ω
(-80 to 0) °C 0.062 °C
(0 to 100) °C 0.062 °C
(100 to 260) °C 0.11 °C
Cu 427, 10 Ω
(-100 to 260) °C 0.23 °C

(A2LA Cert. No. 1877.02) 05/31/2023 Page 6 of 34

 Parameter/Range Frequency CMC2, 4, 6 (±) Comments

AC Voltage – Generate3

(1 to 33) mV (10 to 45) Hz 5.5 µV + 0.64 µV/mV Fluke 5520A

45 Hz to 10 kHz 5 µV + 0.12 µV/mV
(10 to 20) kHz 5 µV + 0.16 µV/mV
(20 to 50) kHz 5.6 µV + 0.8 µV/mV
(50 to 100) kHz 12 µV + 2.8 µV/mV
(100 to 200) kHz 47 µV + 6.4 µV/mV
(200 to 500) kHz 47 µV + 6.4 µV/mV

(33 to 330) mV (10 to 45) Hz 14 µV + 0.24 µV/mV

45 Hz to 10 kHz 24 µV + 87 nV/mV
(10 to 20) kHz 11 µV + 0.13 µV/mV
(20 to 50) kHz 35 µV + 0.28 µV/mV
(50 to 100) kHz 47 µV + 0.64 µV/mV
(100 to 200) kHz 0.11 mV + 1.6 µV/mV
(200 to 500) kHz 0.11 mV + 1.6 µV/mV

330 mV to 3.3 V (10 to 45) Hz 0.12 mV + 0.24 mV/V

45 Hz to 10 kHz 88 µV + 0.12 mV/V
(10 to 20) kHz 99 µV + 0.15 mV/V
(20 to 50) kHz 0.12 mV + 0.24 mV/V
(50 to 100) kHz 0.29 mV + 0.56 mV/V
(100 to 200) kHz 1.1 mV + 1.9 mV/V
(200 to 500) kHz 1.1 mV + 1.9 mV/V

(3.3 to 33) V (10 to 45) Hz 1.3 mV + 0.24 mV/V

45 Hz to 10 kHz 0.94 mV + 0.12 mV/V
(10 to 20) kHz 1.6 mV + 0.18 mV/V
(20 to 50) kHz 1.4 mV + 0.28 mV/V
(50 to 100) kHz 3.7 mV + 0.72 mV/V

(33 to 330) V (10 to 45) Hz 6.8 mV + 0.15 mV/V

45 Hz to 10 kHz 10 mV + 0.16 mV/V
(10 to 20) kHz 12 mV + 0.2 mV/V
(20 to 50) kHz 13 mV + 0.24 mV/V
(50 to 100) kHz 93 mV + 1.6 mV/V

(330 to 1020) V 45 Hz to 1 kHz 87 mV + 0.24 mV/V

(1 to 5) kHz 74 mV + 0.2 mV/V
(5 to 10) kHz 88 mV + 0.24 mV/V

(A2LA Cert. No. 1877.02) 05/31/2023 Page 7 of 34

 Parameter/Range Frequency CMC2, 4, 6 (±) Comments

AC Voltage3 – Measure
Up to 100 mV (1 to 40) Hz 6.1 µV + 0.0003 mV/mV Agilent 3458A
40 Hz to 1 kHz 4.1 µV + 0.0002 mV/mV
(1 to 20) kHz 4.2 µV + 0.0003 mV/mV
(20 to 50) kHz 4.9 µV + 0.001 mV/mV
(50 to 100) kHz 9 µV + 0.005 mV/mV
(100 to 300) kHz 45 µV + 0.04 mV/mV
(1 to 40) Hz 12 µV + 0.000 07 mV/mV
(0.1 to 1) V 40 Hz to 1 kHz 2.7 µV + 0.000 07 mV/mV
(1 to 20) kHz 11 µV + 0.000 14 mV/mV
(20 to 50) kHz 012 µV + 0.0003 mV/mV
(50 to 100) kHz 17 µV + 0.0008 mV/mV
(100 to 300) kHz 47 µV mV + 0.003 mV/mV
(0.3 to 1) MHz 0.12 mV + 0.01 mV/mV
(1 to 2) MHz 3.8 mV + 0.01 mV/mV
(1 to 10) V
(1 to 40) Hz 0.12 mV + 0.000 07 V/V
40 Hz to 1 kHz 0.1 mV + 0.000 07 V/V
(1 to 20) kHz 0.11 mV + 0.000 14 V/V
(20 to 50) kHz 0.12 mV + 0.0003 V/V
(50 to 100) kHz 0.17 mV + 0.0008 V/V
(100 to 300) kHz 0.47 mV + 0.003 V/V
(0.3 to 1) MHz 1.2 mV + 0.010 V/V
(1 to 2) MHz 38 mV + 0.015 V/V
(10 to 100) V
(1 to 40) Hz 1.2 mV + 0.000 07 V/V
40 Hz to 1 kHz 1 mV + 0.000 07 V/V
(1 to 20) kHz 1 mV + 0.000 14 V/V
(20 to 50) kHz 1.2 mV + 0.0003 V/V
(50 to 100) kHz 1.7 mV + 0.0008 V/V
(100 to 300) kHz 4.7 mV + 0.003 V/V
(0.3 to 1) MHz 12 mV + 0.01 V/V
(1 to 2) MHz 0.38 V + 0.015 V/V
(100 to 1000) V (1 to 40) Hz 13 mV + 0.0002 V/V
40 Hz to 1 kHz 11 mV + 0.0002 V/V
(1 to 20) kHz 11 mV + 0.0002 V/V
(20 to 50) kHz 13 mV + 0.000 35 V/V
(50 to 100) kHz 21 mV + 0.0012 V/V
(100 to 300) kHz 57 mV + 0.004 V/V
(0.3 to 1) MHz 0.17 V + 0.015 V/V
(1 to 40) Hz 98 mV + 0.0004 V/V
40 Hz to 1 kHz 84 mV + 0.0004 V/V
(1 to 20) kHz 98 mV V + 0.0006 V/V
(20 to 50) kHz 0.14 V + 0.0012 V/V
(50 to 100) kHz 0.27 V + 0.003 V/V

(A2LA Cert. No. 1877.02) 05/31/2023 Page 8 of 34

 Parameter/Range Frequency CMC2, 4, 5, 6 (±) Comments

AC High Voltage – Measure (1 to 40) kV 5.8 % Fluke 80K-40,

Agilent 34401A

AC Current – Generate3
(29 to 329.99) µA (10 to 20) Hz 0.13 µA + 1.6 nA/µA Fluke 5520A
(20 to 45) Hz 0.12 µA + 1.2 nA/µA
45 Hz to 1 kHz 0.11 µA + 1 nA/µA
(1 to 5) kHz 0.19 µA + 2.4 nA/µA
(5 to 10) kHz 0.35 µA + 6.4 nA/µA
(10 to 30) kHz 0.70 µA + 13 nA/µA
330 µA to 3.2999 mA (10 to 20) Hz 0.65 µA + 1.6 µA/mA
(20 to 45) Hz 0.45 µA + 1 µA/mA
45 Hz to 1 kHz 0.39 µA + 0.8 µA/mA
(1 to 5) kHz 0.69 µA + 1.6 µA/mA
(5 to 10) kHz 2.9 µA + 1.6 µA/mA
(10 to 30) kHz 3.4 µA + 8 µA/mA
(3.3 to 32.999) mA (10 to 20) Hz 6.4 µA + 1.4 µA/mA
(20 to 45) Hz 4 µA + 0.72 µA/mA
45 Hz to 1 kHz 2.7 µA + 0.32 µA/mA
(1 to 5) kHz 3.7 µA + 0.64 µA/mA
(5 to 10) kHz 7.7 + 1.6 µA/mA
(10 to 30) kHz 14 µA + 3.2 µA/mA
(33 to 329.99) mA (10 to 20) Hz 65 µA + 1.4 µA/mA
(20 to 45) Hz 42 µA + 0.72 µA/mA
45 Hz to 1 kHz 29 µA + 0.31 µA/mA
(1 to 5) kHz 68 µA + 0.8 µA/mA
(5 to 10) kHz 0.13 mA + 1.6 µA/mA
(10 to 30) kHz 0.27 mA + 3.2 µA/mA
330 mA to 1.099 99 A (10 to 45) Hz 0.56 mA + 1.4 mA/A
45 Hz to 1 kHz 0.22 mA + 0.4 mA/A
(1 to 5) kHz 2.4 mA + 4.8 mA/A
(5 to 10) kHz 11 mA + 20 mA/A
(1.1 to 2.999 99) A (10 to 45) Hz 1.7 mA + 1.4 mA/A
45 Hz to 1 kHz 0.61 mA + 0.48 mA/A
(1 to 5) kHz 6.1 mA + 4.8 mA/A
(5 to 10) kHz 26 mA + 20 mA/A
(3 to 10.9999) A (45 to 100) Hz 3.1 mA + 0.48 mA/A
100 Hz to 1 kHz 4 mA + 0.8 mA/A
(1 to 5) kHz 74 mA + 24 mA/A
(11 to 20.5) A (45 to 100) Hz 15 mA + 0.96 mA/A
100 Hz to 1 kHz 17 mA + 1.2 mA/A
(1 to 5) kHz 0.27 A + 24 mA/A

(A2LA Cert. No. 1877.02) 05/31/2023 Page 9 of 34

 Parameter/Range Frequency CMC2, 4, 6 (±) Comments

AC Current – Generate3
(cont)

Toroidal

(10 to 16.5) A (45 to 65) Hz 26 mA + 2.1 mA/A Fluke 5520A w/

(16.5 to 150) A 50 mA + 1.9 mA/A 5500coil
(150 to 1025) A 0.34 A + 1.9 mA/A
(10 to 16.5) A (65 to 440) Hz 60 mA + 6 mA/A
(16.5 to 150) A 0.11 A + 5.3 mA/A
(150 to 1025) A 0.86 A + 5.3 mA/A
Non-Toroidal

(10 to 16.5) A (45 to 65) Hz 60 mA + 3.8 mA/A

(16.5 to 150) A 0.23 A + 3.7 mA/A
(150 to 1025) A 1.2 A + 3.7 mA/A
(10 to 16.5) A (65 to 440) Hz 90 mA + 7.2 mA/A
(16.5 to 150) A 0.28 A + 6.7 mA/A
(150 to 1025) A 1.6 A + 6.7 mA/A

(A2LA Cert. No. 1877.02) 05/31/2023 Page 10 of 34

 Parameter/Range Frequency CMC2, 4, 6 (±) Comments

AC Current3 – Measure

(5 to 100) µA (10 to 20) Hz 57 nA + 4 mA/A Agilent 3458A

(20 to 45) Hz 45 nA + 1.5 mA/A
45 Hz to 5 kHz 40 nA + 0.64 mA/A

(0.1 to 1) mA (10 to 20) Hz 0.43 µA + 0.0041 mA/mA

(20 to 45) Hz 0.31 µA + 0.0016 mA/mA
(45 to 100) Hz 0.26 µA + 0.000 67 mA/mA
(0.1 to 5) kHz 0.25 µA + 0.000 37 mA/mA
(5 to 20) kHz 0.26 µA + 0.000 67 mA/mA
(20 to 50) kHz 0.63 µA + 0.0042 mA/mA
(50 to 100) kHz 1.8 µA + 0.0056 mA/mA

(1 to 10) mA (10 to 20) Hz 2.4 µA + 0.0041 mA/mA

(20 to 45) Hz 2.3 µA + 0.0016 mA/mA
(45 to 100) Hz 2.3 µA + 0.000 67 mA/mA
(0.1 to 5) kHz 2.3 µA + 0.000 37 mA/mA
(5 to 20) kHz 2.3 µA + 0.000 67 mA/mA
(20 to 50) kHz 4.5 µA + 0.0041 mA/mA
(50 to 100) kHz 16 µA + 0.0056 mA/mA

(10 to 100) mA (10 to 20) Hz 42 µA + 0.004 mA/mA

(20 to 45) Hz 30 µA + 0.0015 mA/mA
(45 to 100) Hz 25 µA + 0.0006 mA/mA
(0.1 to 5) kHz 24 µA + 0.0003 mA/mA
(5 to 20) kHz 25 µA + 0.0006 mA/mA
(20 to 50) kHz 62 µA + 0.004 mA/mA
(50 to 100) kHz 0.18 mA + 0.0055 mA/mA

(0.1 to 1) A (10 to 20) Hz 0.42 mA + 0.0041 A/A

(20 to 45) Hz 0.3 mA + 0.0017 A/A
(45 to 100) Hz 0.26 mA + 0.0009 A/A
(0.1 to 5) kHz 0.27 mA + 0.0011 A/A
(5 to 20) kHz 0.37 mA + 0.0031 A/A
(20 to 50) kHz 0.92 mA + 0.01 A/A

(1 to 2) A 10 Hz to 2 kHz 0.42 mA + 0.5 mA/A Fluke 8508A

(2 to 10) kHz 0.3 mA + 0.66 mA/A
(10 to 30) kHz 0.96 mA + 2.1 mA/A

(2 to 20) A 10 Hz to 2 kHz 2.4 mA + 0.71 mA/A

(2 to 10) kHz 2.7 mA + 1.9 mA/A

(A2LA Cert. No. 1877.02) 05/31/2023 Page 11 of 34

 Parameter/Equipment Range CMC2, 4, 5, 6 (±) Comments

AC Power3 – Generate Up to 1020 V

(45 to 65) Hz, PF=1 Up to 33 W 0.1 % Fluke 5520A
(33 to 330) W 0.062 %
330 W to 1.1 kW 0.072 %
(1.1 to 3) kW 0.075 %
(3 to 11) kW 0.087 %
(11 to 20.9) kW 0.14 %

DC Power3 – Generate Up to 1020 V

Up to 3 W 0.017 % Fluke 5520A
(3 to 30) W 0.014 %
(30 to 300) W 0.014 %
300 W to 3 kW 0.033 %
(3 to 20.9) kW 0.085 %

Parameter/Range Frequency CMC2, 4, 5, 6 (±) Comments

Phase Generate3 – (10 to 65) Hz 0.1° Fluke 5520A

(0 to 360)° (65 to 500) Hz 0.26°
500 Hz to 1 kHz 0.51°
(1 to 5) kHz 2.6°
(5 to 10) kHz 5.1°
(10 to 30) kHz 10°

Capacitance3 – Generate

(0.19 to 0.3999) nF 10 Hz to 10 kHz 8.8 pF + 4 pF/nF Fluke 5520A

(0.4 to 1.0999) nF 10 Hz to 10 kHz 9.7 pF + 4 pF/nF
(1.1 to 3.2999) nF 10 Hz to 3 kHz 13 pF + 4 pF/nF
(3.3 to 10.9999) nF 10 Hz to 1 kHz 15 pF + 2 pF/nF
(11 to 32.9999) nF 10 Hz to 1 kHz 0.1 nF + 2 pF/nF
(33 to 109.999) nF 10 Hz to 1 kHz 0.15 nF + 2 pF/nF
(110 to 329.999) nF 10 Hz to 1 kHz 0.46 nF + 2 pF/nF
(0.33 to 1.099 99) μF (10 to 600) Hz 1.5 nF + 2 nF/µF
(1.1 to 3.299 99) μF (10 to 300) Hz 4.6 nF + 2 nF/µF
(3.3 to 10.9999) μF (10 to 150) Hz 15 nF + 2 nF/µF
(11 to 32.9999) μF (10 to 120) Hz 59 nF + 3.2 nF/µF
(33 to 109.999) μF (10 to 80) Hz 0.2 µF + 3.6 nF/µF
(110 to 329.999) μF (0 to 50) Hz 0.64 µF + 3.6 nF/µF
(0.33 to 1.099 99) mF (0 to 20) Hz 2 µF + 3.6 µF/mF
(1.1 to 3.299 99) mF (0 to 6) Hz 7 µF + 3.5 µF/mF
(3.3 to 10.9999) mF (0 to 2) Hz 38 µF + 2.6 µF/mF
(11 to 32.9999) mF (0 to 0.6) Hz 90 µF + 6 µF/mF
(33 to 110) mF (0 to 0.2) Hz 0.37 mF + 8.8 µF/mF

(A2LA Cert. No. 1877.02) 05/31/2023 Page 12 of 34

 Parameter/Equipment Range CMC2, 4, 5, 6 (±) Comments

Oscilloscopes3 –

Volts – DC Signal
Into 50 Ω ± 0 mV to 6.6 V 33 µV + 2 mV/V Fluke 5520A
Into 1 MΩ ± 0 mV to 130 V 33 µV + 0.39 mV/V

Volts – Squarewave
Into 50 Ω 1 mVpp to 6.6 Vpp; 91 µV + 4.3 mV/V

Into 1 MΩ 1 mVpp to 130 Vpp;

10 Hz to 1 kHz 0.2 mV + 0.8 mV/V
(1 to 100) kHz 0.24 mV + 2 mV/V

Edge Into 50 Ω ≤ 300 ps (Up to 2 MHz) 82 ps

≤ 350 ps (Above 2 MHz) 82 ps

Leveled Sine Wave 50 kHz Reference 0.33 mV + 17 mV/V

50 kHz to 100 MHz 0.4 mV + 31 mV/V
(100 to 300) MHz 0.43 mV + 36 mV/V
(300 to 600) MHz 0.53 mV + 57 mV/V
(600 to 1100) MHz 0.58 mV + 67 mV/V

Time Marker 5 s to 50 ms 0.000 63 % + T x 0.1 % T = time in seconds

50 ms to 1 ns 0.000 52 %

IV. Fluid Quantities

Parameter/Equipment Range CMC2, 5, 6, 8 (±) Comments

Liquid Flow – (0.7 to 180) GPM 1.2 % Blancett 110-500

Measure3 (lin)/B2800 turbine
flow meter

(A2LA Cert. No. 1877.02) 05/31/2023 Page 13 of 34

V. Mechanical

Parameter/Equipment Range CMC2, 5, 6, 8 (±) Comments

Mass – Measure, 1 mg 2.9 µg Substitution method

Fixed Points 2 mg 2.9 µg using mass standards
3 mg 3.4 µg with mass comparators
5 mg 2.9 µg
10 mg 2.9 µg
20 mg 2.9 µg
30 mg 3.4 µg
50 mg 2.9 µg
100 mg 2.9 µg
200 mg 2.9 µg
300 mg 3.4 µg
500 mg 2.9 µg
1g 6.5 µg
2g 6.5 µg
3g 9 µg
5g 6.5 µg
10 g 9.4 µg
20 g 14 µg
30 g 17 µg
50 g 24 µg
100 g 46 µg
200 g 96 µg
300 g 0.15 mg
500 g 0.32 mg
1 kg 0.48 mg
2 kg 0.66 mg
3 kg 1.3 mg
4 kg 1.3 mg
5 kg 3.9 mg
10 kg 7.3 mg
20 kg 0.11 g

Mass – Measure, Up to 5.1 g 0.43 µg + 0.000 28 % UMX5 comparator

Direct Weigh (> 5.1 to 520) g 0.33 mg XP505 comparator
(> 0.52 to 2.3) kg 1.7 mg XP2004S comparator
(> 2.3 to 5.1) kg 5.4 mg XP5003S comparator
(> 5.1 to 32) kg 66 mg XPE32003LC
comparator

(A2LA Cert. No. 1877.02) 05/31/2023 Page 14 of 34

 Parameter/Equipment Range CMC2, 5, 6, 8 (±) Comments

Balances Up to 10 kg 0.87 x R Class Ultra, 0 & 4

(10 to 32) kg 1.1 x R Weights

R = Unit under test

resolution

Scales Up to 3000 lbs 0.82 x R Class F weights

R = Unit under test

resolution

Scales – Substitution (3000 to 6000) lbs 1.2 x R EURAMET CG-18

Testing
R = Unit under test
resolution

Pressure – Measuring
Equipment3

Pneumatic Gage Up to 10 000 psi 0.024 % DH instruments

Pressure RPM4/HPMS
A70MS/A20MS-AF
reference pressure
monitor

(-14.7 to 15) psi 0.012 % Mensor CPC6000

(15 to 300) psi 0.012 %
(300 to 750) psi 0.012 %
(750 to 1500) psi 0.024 %

Hydraulic Gage Up to 36 000 psi 43 psi Additel ADT681-10-

Pressure GP2500-BAR pressure
gage

Torque Measure – Torque 5 lbf·in to 600 lbf·ft 0.31 % CDI torque transducers
Tools

(A2LA Cert. No. 1877.02) 05/31/2023 Page 15 of 34

VI. Thermodynamic

Parameter/Equipment Range CMC2, 5, 6, 8 (±) Comments

Infrared Temperature – (-15 to 12) °C 1.2 °C Fluke 4180

Measuring Equipment (-12 to -9) °C 1.1 °C
(-9 to -6) °C 1 °C
(-6 to -2) °C 0.94 °C
(-2 to 0) °C 0.82 °C
(0 to 120) °C 0.87 °C + 0.01 °C/°C

(35 to 500) °C 0.62 °C + ΔTChange from 35 Fluke 4181

°C x 0.017

Temperature – Measure (-197 to 660) °C 0.027 °C Fluke 2560, 5628 PRT

Temperature Measuring (-80 to 100) °C 0.018 °C + ΔTChange from - Fluke 5628

Equipment 40 °C x 0.00001 w/reference
baths/blocks
(100 to 300) °C 0.020 °C + ΔTChange from
100 °C x 0.000079

(300 to 400) °C 0.032 °C + ΔTChange from

300 °C x 0.0001

(400 to 660) °C 0.078 °C + ΔTChange from

400 °C x 0.000 034

Relative Humidity – (10 to 80) % RH 0.63 % RH Thunder Scientific

Measuring Equipment 2500LT

Relative Humidity (10 to 70) % RH 1.9 % RH Fluke DewK 1620

Measuring Equipment – (> 70 to 100) % RH 3.5 % RH
Calibration of Humidity
Probes3

(A2LA Cert. No. 1877.02) 05/31/2023 Page 16 of 34

VII. Time & Frequency

Parameter/Equipment Range CMC2, 5, 8 (±) Comments

Frequency – Generate 100 µHz to 15 MHz 0.0024 % HP 33120A function

generator

Frequency – Measure 1 Hz to 225 MHz 0.000 59 % HP 53132A counter

Stopwatches & Timers3 0 s to 24 hr 0.047 s Witschi QT6000

Optical Tachometers3 (1 to 100 000) rpm 0.00035 rpm + 0.000 038 Fluke 5520A, LED
rpm/rpm

(A2LA Cert. No. 1877.02) 05/31/2023 Page 17 of 34

 SATELLITE LOCATION

TRESCAL, INC.
100 N. Babcock St
Melborne, FL 33935
Nathan Thrasher Phone: 321 622 1553

I. Device Specific Parameters

Parameter/Equipment Range CMC2, 5, 6, 8 (±) Comments

Ionizing Fans, Blowers &

Guns

Ion Balance Up to 50 V 0.28 V Ion System 210 charge

plate monitor, HP 34401A
Discharge Time Up to 30 sec 0.039 s

Electrostatic Discharge

Mats – Resistance Up to 1 GΩ 12 % Desco 19787 surface

resistance meter

Soldering Systems –
Measure

Leak Voltage Up to 40 mV 0.7 mV Hakko FG-101 solder

tester
Tip-to-Ground Ω Up to 40 Ω 0.7 Ω

Temperature Stability (32 to 1300) °F 7 °F

(A2LA Cert. No. 1877.02) 05/31/2023 Page 18 of 34

II. Dimensional

Parameter/Equipment Range CMC2 (±) Comments

Micrometers3

Spindle Linearity Up to 20 in 16 µin + 5.9 µin/in Gage blocks

Anvil Flatness 50 µin 6.2 µin Optical flat

Parallelism 50 µin 11 µin Optical flat

Depth Micrometer Base Up to 200 µin 31 µin Gage blocks

Flatness

Calipers3

Outside Diameter Up to 20 in 30 µin + 5.2 µin/in Gage blocks

Inside Diameter Up to 20 in 34 µin + 5.1 µin/in

Step & Depth Up to 20 in 31 µin + 5.2 µin/in

Height Gages3 Up to 24 in 18 µin + 5.7 µin/in Gage blocks

Gage Amp w/ Probe3 Up to 0.005 in 30 µin Gage blocks, Tesa TT-

80 electronic length
measuring instrument

Length & Plain Diameter3 Trimos TULM210

(Length Standards, Cylindrical Up to 4 in length measuring
Plugs & Pins, Feeler Gages) instrument
Steel 34 µin + 1.2 µin/in

Aluminum 34 µin + 1.4 µin/in

Length 3 Up to 20 in 33 µin + 4.2 µin/in Gage blocks, Tesa TT-

80 electronic length
measuring instrument

Dial & Digital Indicators3 Up to 1 in 49 µin Itall 700 dial indicator

calibrator

(1 to 2) in 18 µin + 5.2 µin/in Gage blocks

(A2LA Cert. No. 1877.02) 05/31/2023 Page 19 of 34

 Parameter/Equipment Range CMC2 (±) Comments

Threaded Plug Gages,

Go & NoGo3
60° Pitch Diameter Up to 4 in 82 µin Trimos TULM210
(4.5 to 80 TPI) length measuring
instrument, Vermont
Major Diameter Up to 4 in 34 µin + 1.2 µin/in gage thread wire set

Protractors3 (0 to 180)° 0.0077° Sine bar, gage

blocks, surface plate

III. Dimensional Testing/Calibration

Parameter/Equipment Range CMC2 (±) Comments

Dimensional
Measurements3–

Checking Angle Flatness: Up to 2000 µin 33 µin + 3 µin/in Tesa TT-80

Plates, V-Blocks, electronic length
Fixtures & Parallelism: Up to 2000 µin 33 µin + 3 µin/in measuring
Workpieces instrument

IV. Electrical – DC/Low Frequency

Parameter/Equipment Range CMC2, 4, 6 (±) Comments

DC Voltage – Generate3 (0 to 330) mV 0.8 µV + 16 nV/mV Fluke 5520A

330 mV to 3.3 V 17 µV + 5 µV/V
(3.3 to 33) V 88 µV + 7 µV/V
(33 to 330) V 0.56 mV + 14 µV/V
(330 to 1000) V 2.7 mV + 14 µV/V

DC Voltage – Measure Up to 100 mV 0.33 µV + 17 µV/V Agilent 3458A

(0 to 1) V 0.52 µV + 8 µV/V
(0 to 10) V 8.8 µV + 8.1 µV/V
(0 to 100) V 35 µV + 10 µV/V
(0 to 1000) V 1.2 mV + 11 µV/V

(A2LA Cert. No. 1877.02) 05/31/2023 Page 20 of 34

 Parameter/Equipment Range CMC2, 4, 5, 6 (±) Comments

DC Current – Generate (0 to 330) µA 16 nA + 0.12 nA/µA Fluke 5520A

330 µA to 3.3 mA 41 nA + 80 nA/mA
(3.3 to 33) mA 0.21 µA + 80 nA/mA
(33 to 330) mA 2.1 µA + 80 nA/mA
330 mA to 1.1 A 33 µA + 0.16 mA/A
(1.1 to 3.0) A 0.37 mA + 0.13 mA/A
(3 to 11) A 0.49 mA + 0.39 mA/A
(11 to 20.5) A 9.4 mA + 0.8 mA/A

DC Current – Measure (0 to 100) nA 41 pA + 89 µA/A HP 3458A

(0.1 to 1) µA 70 pA + 21 µA/A
(1 to 10) µA 0.7 nA + 18 µA/A
(10 to 100) µA 5.8 nA + 9.2 µA/A
(0.1 to 1) mA 58 nA + 9.7 µA/A
(1 to 10) mA 0.58 µA + 8 µA/A
(10 to 100) mA 5.8 µA + 17 µA/A
(0.1 to 1) A 59 µA + 81 µA/A

(1 to 200) A 0.0046 % Ohm-Lab CS-200

shunt, HP 34401A

(200 to 1000) A 0.18 % Empro B-1000-100

shunt, HP 34401A

Resistance – Generate (0 to 10.9999) Ω 1.2 mΩ + 24 µΩ/Ω Fluke 5520A

(11 to 32.9999) Ω 1.5 mΩ + 24 µΩ/Ω
(33 to 109.9999) Ω 1.9 mΩ + 22 µΩ/Ω
(110 to 329.9999) Ω 4.1 mΩ + 22 µΩ/Ω
(330 to 1099.999) Ω 9.1 mΩ + 22 µΩ/Ω
(1.1 to 3.299 999) kΩ 41 mΩ + 22 µΩ/Ω
(3.3 to 10.999 99) kΩ 92 mΩ + 22 µΩ/Ω
(11 to 32.999 99) kΩ 0.41 Ω + 22 µΩ/Ω
(33 to 109.9999) kΩ 0.9 Ω + 22 µΩ/Ω
(110 to 329.9999) kΩ 8.4 Ω + 26 µΩ/Ω
(330 to 1099.999) kΩ 14 Ω + 26 µΩ/Ω
(1.1 to 3.299 999) MΩ 93 Ω + 48 µΩ/Ω
(3.3 to 10.999 99) MΩ 0.4 kΩ + 0.1 mΩ/Ω
(11 to 32.999 99) MΩ 4.4 kΩ + 0.2 mΩ/Ω
(33 to 109.9999) MΩ 16 kΩ + 0.4 mΩ/Ω
(110 to 329.9999) MΩ 0.35 MΩ + 2.4 mΩ/Ω
(330 to 1100) MΩ 4.4 MΩ + 12 mΩ/Ω

(A2LA Cert. No. 1877.02) 05/31/2023 Page 21 of 34

 Parameter/Equipment Range CMC2, 4, 6 (±) Comments

Resistance – Measure (0 to 10) Ω 55 µΩ + 15 µΩ/Ω HP 3458A

(10 to 100) Ω 0.52 mΩ + 13 µΩ/Ω
(1.1 to 1) kΩ 0.53 mΩ + 10 µΩ/Ω
(1 to 10) kΩ 5.3 mΩ + 10 µΩ/Ω
(10 to 100) kΩ 53 mΩ + 11 µΩ/Ω
(1.1 to 1) MΩ 2.3 Ω + 17 µΩ/Ω
(1 to 10) MΩ 0.1 kΩ + 55 µΩ/Ω
(10 to 100) MΩ 1 kΩ + 0.52 mΩ/Ω
(1.1 to 1) GΩ 10 kΩ + 5.1 mΩ/Ω

Parameter/Range Frequency CMC2, 4, 6 (±) Comments

AC Voltage –
Generate3

(1 to 33) mV (10 to 45) Hz 5.5 µV + 0.64 µV/mV Fluke 5520A

45 Hz to 10 kHz 5 µV + 0.12 µV/mV
(10 to 20) kHz 5 µV + 0.16 µV/mV
(20 to 50) kHz 5.6 µV + 0.8 µV/mV
(50 to 100) kHz 12 µV + 2.8 µV/mV
(100 to 200) kHz 47 µV + 6.4 µV/mV
(200 to 500) kHz 47 µV + 6.4 µV/mV

(33 to 330) mV (10 to 45) Hz 14 µV + 0.24 µV/mV

45 Hz to 10 kHz 24 µV + 87 nV/mV
(10 to 20) kHz 11 µV + 0.13 µV/mV
(20 to 50) kHz 35 µV + 0.28 µV/mV
(50 to 100) kHz 47 µV + 0.64 µV/mV
(100 to 200) kHz 0.11 mV + 1.6 µV/mV
(200 to 500) kHz 0.11 mV + 1.6 µV/mV

330 mV to 3.3 V (10 to 45) Hz 0.12 mV + 0.24 mV/V

45 Hz to 10 kHz 88 µV + 0.12 mV/V
(10 to 20) kHz 99 µV + 0.15 mV/V
(20 to 50) kHz 0.12 mV + 0.24 mV/V
(50 to 100) kHz 0.29 mV + 0.56 mV/V
(100 to 200) kHz 1.1 mV + 1.9 mV/V
(200 to 500) kHz 1.1 mV + 1.9 mV/V

(A2LA Cert. No. 1877.02) 05/31/2023 Page 22 of 34

 Parameter/Range Frequency CMC2, 4, 6 (±) Comments

AC Voltage –
Generate3 (cont)

(3.3 to 33) V (10 to 45) Hz 1.3 mV + 0.24 mV/V Fluke 5520A

45 Hz to 10 kHz 0.94 mV + 0.12 mV/V
(10 to 20) kHz 1.6 mV + 0.18 mV/V
(20 to 50) kHz 1.4 mV + 0.28 mV/V
(50 to 100) kHz 3.7 mV + 0.72 mV/V

(33 to 330) V (10 to 45) Hz 6.8 mV + 0.15 mV/V

45 Hz to 10 kHz 10 mV + 0.16 mV/V
(10 to 20) kHz 12 mV + 0.2 mV/V
(20 to 50) kHz 13 mV + 0.24 mV/V
(50 to 100) kHz 93 mV + 1.6 mV/V

(330 to 1020) V 45 Hz to 1 kHz 87 mV + 0.24 mV/V

(1 to 5) kHz 74 mV + 0.2 mV/V
(5 to 10) kHz 88 mV + 0.24 mV/V

AC Voltage3 –
Measure

Up to 100 mV (1 to 40) Hz 6.1 µV + 0.0003 mV/mV Agilent 3458A

40 Hz to 1 kHz 4.1 µV + 0.0002 mV/mV
(1 to 20) kHz 4.2 µV + 0.0003 mV/mV
(20 to 50) kHz 4.9 µV + 0.001 mV/mV
(50 to 100) kHz 9 µV + 0.005 mV/mV
(100 to 300) kHz 45 µV + 0.04 mV/mV

(0.1 to 1) V (1 to 40) Hz 12 µV + 0.000 07 mV/mV

40 Hz to 1 kHz 2.7 µV + 0.000 07 mV/mV
(1 to 20) kHz 11 µV + 0.000 14 mV/mV
(20 to 50) kHz 012 µV + 0.0003 mV/mV
(50 to 100) kHz 17 µV + 0.0008 mV/mV
(100 to 300) kHz 47 µV mV + 0.003 mV/mV
(0.3 to 1) MHz 0.12 mV + 0.01 mV/mV
(1 to 2) MHz 3.8 mV + 0.01 mV/mV

(1 to 10) V (1 to 40) Hz 0.12 mV + 0.000 07 V/V

40 Hz to 1 kHz 0.1 mV + 0.000 07 V/V
(1 to 20) kHz 0.11 mV + 0.000 14 V/V
(20 to 50) kHz 0.12 mV + 0.0003 V/V
(50 to 100) kHz 0.17 mV + 0.0008 V/V
(100 to 300) kHz 0.47 mV + 0.003 V/V
(0.3 to 1) MHz 1.2 mV + 0.01 V/V
(1 to 2) MHz 38 mV + 0.015 V/V

(A2LA Cert. No. 1877.02) 05/31/2023 Page 23 of 34

 Parameter/Range Frequency CMC2, 4, 6 (±) Comments

AC Voltage3 –
Measure (cont)

(10 to 100) V (1 to 40) Hz 1.2 mV + 0.000 07 V/V Agilent 3458A

40 Hz to 1 kHz 1 mV + 0.000 07 V/V
(1 to 20) kHz 1 mV + 0.000 14 V/V
(20 to 50) kHz 1.2 mV + 0.0003 V/V
(50 to 100) kHz 1.7 mV + 0.0008 V/V
(100 to 300) kHz 4.7 mV + 0.003 V/V
(0.3 to 1) MHz 12 mV + 0.01 V/V
(1 to 2) MHz 0.38 V + 0.015 V/V

(100 to 1000) V (1 to 40) Hz 13 mV + 0.0002 V/V

40 Hz to 1 kHz 11 mV + 0.0002 V/V
(1 to 20) kHz 11 mV + 0.0002 V/V
(20 to 50) kHz 13 mV + 0.000 35 V/V
(50 to 100) kHz 21 mV + 0.0012 V/V
(100 to 300) kHz 57 mV + 0.004 V/V
(0.3 to 1) MHz 0.17 V + 0.015 V/V

(1 to 40) Hz 98 mV + 0.0004 V/V

40 Hz to 1 kHz 84 mV + 0.0004 V/V
(1 to 20) kHz 98 mV V + 0.0006 V/V
(20 to 50) kHz 0.14 V + 0.0012 V/V
(50 to 100) kHz 0.27 V + 0.003 V/V

(A2LA Cert. No. 1877.02) 05/31/2023 Page 24 of 34

 Parameter/Range Frequency CMC2, 4, 6 (±) Comments

AC Current – Generate3
(29 to 329.99) µA (10 to 20) Hz 0.13 µA + 1.6 nA/µA Fluke 5520A
(20 to 45) Hz 0.12 µA + 1.2 nA/µA
45 Hz to 1 kHz 0.11 µA + 1 nA/µA
(1 to 5) kHz 0.19 µA + 2.4 nA/µA
(5 to 10) kHz 0.35 µA + 6.4 nA/µA
(10 to 30) kHz 0.70 µA + 13 nA/µA
330 µA to 3.2999 mA (10 to 20) Hz 0.65 µA + 1.6 µA/mA
(20 to 45) Hz 0.45 µA + 1 µA/mA
45 Hz to 1 kHz 0.39 µA + 0.8 µA/mA
(1 to 5) kHz 0.69 µA + 1.6 µA/mA
(5 to 10) kHz 2.9 µA + 1.6 µA/mA
(10 to 30) kHz 3.4 µA + 8 µA/mA
(3.3 to 32.999) mA (10 to 20) Hz 6.4 µA + 1.4 µA/mA
(20 to 45) Hz 4 µA + 0.72 µA/mA
45 Hz to 1 kHz 2.7 µA + 0.32 µA/mA
(1 to 5) kHz 3.7 µA + 0.64 µA/mA
(5 to 10) kHz 7.7 + 1.6 µA/mA
(10 to 30) kHz 14 µA + 3.2 µA/mA
(33 to 329.99) mA (10 to 20) Hz 65 µA + 1.4 µA/mA
(20 to 45) Hz 42 µA + 0.72 µA/mA
45 Hz to 1 kHz 29 µA + 0.31 µA/mA
(1 to 5) kHz 68 µA + 0.8 µA/mA
(5 to 10) kHz 0.13 mA + 1.6 µA/mA
(10 to 30) kHz 0.27 mA + 3.2 µA/mA
330 mA to 1.099 99 A (10 to 45) Hz 0.56 mA + 1.4 mA/A
45 Hz to 1 kHz 0.22 mA + 0.4 mA/A
(1 to 5) kHz 2.4 mA + 4.8 mA/A
(5 to 10) kHz 11 mA + 20 mA/A
(1.1 to 2.999 99) A (10 to 45) Hz 1.7 mA + 1.4 mA/A
45 Hz to 1 kHz 0.61 mA + 0.48 mA/A
(1 to 5) kHz 6.1 mA + 4.8 mA/A
(5 to 10) kHz 26 mA + 20 mA/A
(3 to 10.9999) A (45 to 100) Hz 3.1 mA + 0.48 mA/A
100 Hz to 1 kHz 4 mA + 0.8 mA/A
(1 to 5) kHz 74 mA + 24 mA/A

(45 to 100) Hz 15 mA + 0.96 mA/A

(11 to 20.5) A 100 Hz to 1 kHz 17 mA + 1.2 mA/A
(1 to 5) kHz 0.27 A + 24 mA/A

(A2LA Cert. No. 1877.02) 05/31/2023 Page 25 of 34

 Parameter/Range Frequency CMC2, 5, 6 (±) Comments

AC Current3 – Measure

(5 to 100) µA (10 to 20) Hz 57 nA + 4 mA/A Agilent 3458A

(20 to 45) Hz 45 nA + 1.5 mA/A
45 Hz to 5 kHz 40 nA + 0.64 mA/A

(0.1 to 1) mA (10 to 20) Hz 0.43 µA + 0.0041 mA/mA

(20 to 45) Hz 0.31 µA + 0.0016 mA/mA
(45 to 100) Hz 0.26 µA + 0.000 67 mA/mA
(0.1 to 5) kHz 0.25 µA + 0.000 37 mA/mA
(5 to 20) kHz 0.26 µA + 0.000 67 mA/mA
(20 to 50) kHz 0.63 µA + 0.0042 mA/mA
(50 to 100) kHz 1.8 µA + 0.0056 mA/mA

(1 to 10) mA (10 to 20) Hz 2.4 µA + 0.0041 mA/mA

(20 to 45) Hz 2.3 µA + 0.0016 mA/mA
(45 to 100) Hz 2.3 µA + 0.000 67 mA/mA
(0.1 to 5) kHz 2.3 µA + 0.000 37 mA/mA
(5 to 20) kHz 2.3 µA + 0.000 67 mA/mA
(20 to 50) kHz 4.5 µA + 0.0041 mA/mA
(50 to 100) kHz 16 µA + 0.0056 mA/mA

(10 to 100) mA (10 to 20) Hz 42 µA + 0.004 mA/mA

(20 to 45) Hz 30 µA + 0.0015 mA/mA
(45 to 100) Hz 25 µA + 0.0006 mA/mA
(0.1 to 5) kHz 24 µA + 0.0003 mA/mA
(5 to 20) kHz 25 µA + 0.0006 mA/mA
(20 to 50) kHz 62 µA + 0.004 mA/mA
(50 to 100) kHz 0.18 mA + 0.0055 mA/mA

(0.1 to 1) A (10 to 20) Hz 0.42 mA + 0.0041 A/A

(20 to 45) Hz 0.3 mA + 0.0017 A/A
(45 to 100) Hz 0.26 mA + 0.0009 A/A
(0.1 to 5) kHz 0.27 mA + 0.0011 A/A
(5 to 20) kHz 0.37 mA + 0.0031 A/A
(20 to 50) kHz 0.92 mA + 0.01 A/A

(A2LA Cert. No. 1877.02) 05/31/2023 Page 26 of 34

 Parameter/Equipment Range CMC2, 4, 6 (±) Comments

Capacitance3 –
Generate

(0.19 to 0.3999) nF 10 Hz to 10 kHz 8.8 pF + 4 pF/nF Fluke 5520A

(0.4 to 1.0999) nF 10 Hz to 10 kHz 9.7 pF + 4 pF/nF
(1.1 to 3.2999) nF 10 Hz to 3 kHz 13 pF + 4 pF/nF
(3.3 to 10.9999) nF 10 Hz to 1 kHz 15 pF + 2 pF/nF
(11 to 32.9999) nF 10 Hz to 1 kHz 0.1 nF + 2 pF/nF
(33 to 109.999) nF 10 Hz to 1 kHz 0.15 nF + 2 pF/nF
(110 to 329.999) nF 10 Hz to 1 kHz 0.46 nF + 2 pF/nF
(0.33 to 1.099 99) μF (10 to 600) Hz 1.5 nF + 2 nF/µF
(1.1 to 3.299 99) μF (10 to 300) Hz 4.6 nF + 2 nF/µF
(3.3 to 10.9999) μF (10 to 150) Hz 15 nF + 2 nF/µF
(11 to 32.9999) μF (10 to 120) Hz 59 nF + 3.2 nF/µF
(33 to 109.999) μF (10 to 80) Hz 0.2 µF + 3.6 nF/µF
(110 to 329.999) μF (0 to 50) Hz 0.64 µF + 3.6 nF/µF
(0.33 to 1.099 99) mF (0 to 20) Hz 2 µF + 3.6 µF/mF
(1.1 to 3.299 99) mF (0 to 6) Hz 7 µF + 3.5 µF/mF
(3.3 to 10.9999) mF (0 to 2) Hz 38 µF + 2.6 µF/mF
(11 to 32.9999) mF (0 to 0.6) Hz 90 µF + 6 µF/mF
(33 to 110) mF (0 to 0.2) Hz 0.37 mF + 8.8 µF/mF

(A2LA Cert. No. 1877.02) 05/31/2023 Page 27 of 34

 Parameter/Equipment Range CMC2, 6 (±) Comments

Electrical Simulation of
Thermocouple–

Type J (-210 to -100) ºC 0.21 °C Fluke 5520A

(-100 to -30) ºC 0.13 °C
(-30 to 150) ºC 0.12 °C
(150 to 760) ºC 0.14 °C
(760 to 1200) ºC 0.18 °C
Type K
(-200 to -100) ºC 0.26 °C
(-100 to -25) ºC 0.15 °C
(-25 to 120) ºC 0.13 °C
(120 to 1000) ºC 0.21 °C
(1000 to 1372) ºC 0.31 °C
Type R
(0 to 250) ºC 0.44 °C
(250 to 400) ºC 0.28 °C
(400 to 1000) ºC 0.26 °C
(1000 to 1767) ºC 0.31 °C
Type S
(0 to 250) ºC 0.37 °C
(250 to 1000) ºC 0.28 °C
(1000 to 1400) ºC 0.29 °C
Type T (1400 to 1767) ºC 0.36 °C

(-250 to -150) ºC 0.49 °C

(-150 to 0) ºC 0.21 °C
(0 to 120) ºC 0.15 °C
(120 to 400) ºC 0.14 °C

(A2LA Cert. No. 1877.02) 05/31/2023 Page 28 of 34

 Parameter/Equipment Range CMC2, 4, 5, 6 (±) Comments

Oscilloscopes3 –

Volts – DC Signal
Into 50 Ω ± 0 mV to 6.6 V 33 µV + 2 mV/V Fluke 5520A
Into 1 MΩ ± 0 mV to 130 V 33 µV + 0.39 mV/V

Volts – Squarewave
Into 50 Ω 1 mVpp to 6.6 Vpp; 91 µV + 4.3 mV/V

Into 1 MΩ 1 mVpp to 130 Vpp;

10 Hz to 1 kHz 0.2 mV + 0.8 mV/V
(1 to 100) kHz 0.24 mV + 2 mV/V

Edge into 50 Ω ≤ 300 ps (Up to 2 MHz) 82 ps

≤ 350 ps (Above 2 MHz) 82 ps

Leveled Sine Wave 50 kHz Reference 0.33 mV + 17 mV/V

50 kHz to 100 MHz 0.4 mV + 31 mV/V
(100 to 300) MHz 0.43 mV + 36 mV/V
(300 to 600) MHz 0.53 mV + 57 mV/V
(600 to 1100) MHz 0.58 mV + 67 mV/V

Time Marker 5 s to 50 ms 0.000 63 % + T x 0.1 % T = time in seconds

50 ms to 1 ns 0.000 52 %

V. Electrical – RF/Microwave

Parameter/Equipment Range CMC2, 5, 6, 8 (±) Comments

RF Microwave, Absolute 0.05 to 10V pk-pk

Power – Generate Up to 100 kHz 0.4 % HP 33120A
100 kHz to 1 MHz 0.42 %
(1 to 15) MHz 0.55 %

(-100 to 15) dBm 1.7 dB HP 8648C

100 kHz to 3.2 GHz

RF Microwave, Absolute (-30 to 20) dBm 3.7 % Agilent E4419B w/

Power – Measure3 100 kHz to 4.2 GHz HP 8482A

(A2LA Cert. No. 1877.02) 05/31/2023 Page 29 of 34

 Parameter/Equipment Range CMC2, 6, 8 (±) Comments

Distortion – Measure 20 Hz to 50 kHz 1.2 dB HP 8903B

(50 to 100) kHz 2.3 dB

100 kHz to 2.9 GHz 2.7 dB HP 8594E

VI. Mechanical

Parameter/Equipment Range CMC2, 5, 6, 8 (±) Comments

Accelerometers

(1 to 10) g (0.5 to 1) Hz 1.6 % VR9500, PCB 301A11

(> 1 to 10) Hz 1.3 % reference sensor
(11 to 99) Hz 1.6 %
100 Hz 1.3 %
(101 to 920) Hz 1.7 %
921 Hz to 5 kHz 2%
(5 to 10) kHz 2.4 %

Force– Measuring
Equipment

Crimpers/Banding (0 to 120) lbf 0.62 lb DMC PT-100A pull

Tools tester

Force Gages (0 to 100) lbf 0.0023 %

Class F weights

Pneumatic Pressure – (> 0 to 5) psiv 0.06 % Ashcroft AQS & HQS

Measuring Equipment (> 0 to 60) psia 0.06 % pressure modules
(> 0 to 30) psig 0.061 %
(> 0 to 100) psig 0.061 %
(> 0 to 500) psig 0.061 %
(> 0 to 250) inH20 0.06 %
(> 0 to 500) mmHg 0.033 %

Scales Up to 200 lbs 0.82 x R Class F weights

R = Unit under test

resolution

(A2LA Cert. No. 1877.02) 05/31/2023 Page 30 of 34

 Parameter/Equipment Range CMC2, 5, 6, 8 (±) Comments

Balances

Resolution 0.0001 g ≤ 500 mg 1.2 x R Class S-1 weights

> 500 mg to 1 g 1.4 x R
(> 1 to 2) g 1.7 x R R = Unit under test
(> 2 to 5) g 2.2 x R resolution
(> 5 to 10) g 3.0 x R
> 10 g to 2 kg 4.1 x R

Resolution 0.001 g ≤ 20 g 0.91 x R

(> 20 to 50) g 1.1 x R
(> 50 to 100) g 1.4 x R
(> 100 to 200) g 2.5 x R
> 200 g to 2 kg 3.6 x R

Resolution 0.01 g ≤ 100 g 0.82 x R

(> 100 to 200) g 0.85 x R
(> 200 to 500) g 1.0 x R
> 500 g to 2 kg 1.4 x R

Resolution 0.1 g, 1 g, ≤ 2 kg 0.82 x R

& 10 g

Torque Transducers Up to 250 lbf-ft 0.012 % Class F weights,

calibration arms

Torque – Measuring (1 to 10) ozf-in 1.2 % AWS torque transducers

Equipment (10 to 50) ozf-in 0.58 % & CDI torque calibration
system
Snap-Action & 50 ozf-in to 250 lbf-ft 0.31 %
Breakover Wrenches,
Screwdrivers,
Electronic, Digital &
Dial Indicating

VII. Optical Quantities

Parameter/Equipment Range CMC2, 5 (±) Comments

Luminance Meters (0.5 to 1700) fL 2.6 % Hoffman Engineering

LS-65-8C

(A2LA Cert. No. 1877.02) 05/31/2023 Page 31 of 34

VIII. Thermodynamics

Parameter/Equipment Range CMC2, 6, 8 (±) Comments

Temperature – (-80 to 350) °C 0.13 °C Fluke 1523, 5626 PRT,

Measuring Equipment calibration bath

(-80 to 350) °C 0.14 °C + ΔTChange from Fluke 1523, 5618B PRT,

-80 °C x 0.0002 calibration bath

Temperature – Measure (-196 to 661) °C 0.018 °C + ΔTChange Fluke 1523, 5626 PRT
from -196 °C x 0.000 033

(-196 to 500) °C 0.029 °C + ΔTChange Fluke 1523, 5618B PRT

from -196 °C x 0.000 28

(662 to 1000) °C 3.2 °C + ΔTChange from TC probe

662 °C x 0.011

Relative Humidity – (20 to 85) % RH 1.5 % RH Vaisala M170 w/ HMP-

Measure & Generate (85 to 90) % RH 2.2 % RH 77(B) probe

Temperature – (-50 to 100) °C 0.86 °C Fluke 2635A Hydrabucket

Environmental w/Type T SLE
Chambers, Temperature thermocouple
Uniformity Survey

(A2LA Cert. No. 1877.02) 05/31/2023 Page 32 of 34

 Radiation Thermometry Source using CI Systems & SBIR calibration standards & contact
thermometry method

CI Systems CI System Santa Barbara IR Sources

SR800N, SR800R SR800 Source
Sources

Temperature CMC2, 6, 8 (±) CMC2, 6, 8 (±) CMC2, 6, 8 (±)

-40 °C 0.0086 °C 0.32 °C

-30 °C 0.0087 °C 0.32 °C
-20 °C 0.0088 °C 0.32 °C
-10 °C 0.0089 °C 0.32 °C
0 °C 0.009 °C 0.33 °C 0.015 °C
10 °C 0.009 °C 0.35 °C 0.017 °C
20 °C 0.0091 °C 0.36 °C 0.018 °C
30 °C 0.0092 °C 0.37 °C 0.020 °C
40 °C 0.0093 °C 0.39 °C 0.021 °C
50 °C 0.0094 °C 0.40 °C 0.023 °C
60 °C 0.0095 °C 0.41 °C 0.025 °C
70 °C 0.0096 °C 0.42 °C 0.026 °C
80 °C 0.0097 °C 0.44 °C 0.028 °C
90 °C 0.0098 °C 0.44 °C 0.029 °C
100 °C 0.0098 °C 0.44 °C 0.031 °C
110 °C 0.0099 °C 0.44 °C
120 °C 0.01 °C 0.44 °C
130 °C 0.01 °C 0.44 °C
140 °C 0.01 °C 0.44 °C
150 °C 0.01 °C 0.44 °C

IX. Time & Frequency

Parameter/Equipment Range CMC2, 6, 8 (±) Comments

Frequency – Measuring
Equipment

Time Base 10 MHz 0.59 mHz 58305A GPS receiver, HP

53132A frequency counter

Frequency – Measure 0.1 Hz to 225 MHz 74 nHz + 0.1 µHz/Hz HP 53132A frequency
counter

(A2LA Cert. No. 1877.02) 05/31/2023 Page 33 of 34

 Parameter/Equipment Range CMC2, 6, 8 (±) Comments

Frequency – Generate Up to 15 MHz 44 µHz + 0.12 µHz/Hz HP 33120A function

generator

100 kHz to 3.2 GHz 5.8 Hz + 0.1 µHz/Hz HP 8648C signal generator

Stopwatch Up to 24 Hr 0.039 s 58305A GPS receiver, HP

53132A frequency counter
___________________________

1
This laboratory offers commercial calibration services and field calibration services.
2
Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement
that a laboratory can achieve within its scope of accreditation when performing more or less routine
calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent
expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage
factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory
may be greater than the CMC due to the behavior of the customer’s device and to influences from the
circumstances of the specific calibration.
3
Field calibration service is available for this calibration. Please note the actual measurement uncertainties
achievable on a customer's site can normally be expected to be larger than the CMC uncertainty found
on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of
calibration and for other possible adverse effects such as those caused by transportation of the calibration
equipment. The usual allowance for the actual uncertainty introduced by the item being calibrated, (e.g.
resolution) must also be considered and this, on its own, could result in the actual measurement
uncertainty achievable on a customer’s site being larger than the CMC uncertainty.
4
The stated measured values are determined using the indicated instrument (see Comments). This
capability is suitable for the calibration of the devices intended to measure or generate the measured value
in the ranges indicated. CMC’s are expressed as either a specific value that covers the full range or as a
percent or fraction of the reading plus a fixed floor specification.
5
In the statement of CMC, all percentages are percent of reading unless otherwise indicated. In the statement
of CMC, R represent the resolution of the unit under test.
6
Uncertainty components that can be reasonably attributed to the Unit Under Test have not been utilized in
the calculation of the CMC value for this measurement parameter.
7
This scope meets A2LA’s P112 Flexible Scope Policy.
8
The type of instrument or material being calibrated is defined by the parameter. This indicates the
laboratory is capable of calibrating instruments that measure or generate the values in the ranges indicated
for the listed measurement parameter.

(A2LA Cert. No. 1877.02) 05/31/2023 Page 34 of 34

 Accredited Laboratory
A2LA has accredited

TRESCAL, INC.
Boca Raton, FL
for technical competence in the field of

Calibration
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General
requirements for the competence of testing and calibration laboratories. This laboratory also meets the requirements of
ANSI/NCSL Z540-1-1994, ANSI/NCSL Z540.3-2006 and R205 – Specific Requirements: Calibration Laboratory Accreditation Program.
This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality
management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017).

Presented 31st day of May 2023.

_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 1877.02
Valid to November 30, 2024

For the calibrations to which this accreditation applies, please refer to the laboratory’s Calibration Scope of Accreditation.