Scribd
Upload
14 views1 page

Thecodeyouhavetherighttoget

Uploaded by

Harshit's Lab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
14 views1 page

Thecodeyouhavetherighttoget

Uploaded by

Harshit's Lab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

#include <LiquidCrystal_I2C.

h>
#include "DHT.h"
#define DHTPIN 13
#define DHTTYPE DHT11

LiquidCrystal_I2C lcd(0x27, 16, 2); // I2C address 0x27 (from DIYables LCD), 16
column and 2 rows
DHT dht(DHTPIN, DHTTYPE);

void setup()
{
dht.begin(); // initialize the sensor
lcd.init(); // initialize the lcd
lcd.backlight(); // open the backlight
}

void loop()
{
delay(2000); // wait a few seconds between measurements

float humi = dht.readHumidity(); // read humidity


float tempC = dht.readTemperature(); // read temperature

lcd.clear();
// check if any reads failed
if (isnan(humi) || isnan(tempC)) {
lcd.setCursor(0, 0);
lcd.print("Failed");
} else {
lcd.setCursor(0, 0); // start to print at the first row
lcd.print("Temp: ");
lcd.print(tempC); // print the temperature
lcd.print((char)223); // print ° character
lcd.print("C");

lcd.setCursor(0, 1); // start to print at the second row


lcd.print("Humi: ");
lcd.print(humi); // print the humidity
lcd.print("%");
}
}

You might also like