Scribd
Upload
3 views

Assignment Unit 5 - Communication

Uploaded by

Agha Husain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

Assignment Unit 5 - Communication

Uploaded by

Agha Husain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING

Assignment: Unit 5
Subject
Subject Fundamental of Electronics Engineering BEC-101
Code
Mr. Joginder Singh Date of Date of
Faculty Name Dr. Praveen Bhola Issue 06/12/2023 Submission
15/12/2023
Mr. Agha A. Husain
Unit-5 Fundamental of Communication Engineering and Wireless Communications.

1. Define the various elements of communication system and also draw its functional block
diagram.
2. Define modulation index for AM wave. Explain Amplitude modulation with proper diagrams.
3. An AM transmitter radiates 20 kilowatts of power when modulation percentage is 75. How
much of this is carrier power?
4. Describe AM Demodulator with adequate diagram.
5. An audio frequency signal 10Sin2π x 500t is used to amplitude modulate a carrier of 50Sin
2π x 105 t. Calculate: (i) Modulation index (ii) Amplitude of Each side band (iii) Total power
delivered to the load of 2 KΩ. (iv) Bandwidth.
6. An audio frequency signal 20 sin 2π x 600t is used to amplitude modulate a carrier of 70 sin
2π x 106t. Calculate: a) Modulation index, b) Sideband frequencies, c) Amplitude of each
sideband, d) Bandwidth required e) total power delivered to the load of 600 ohms.
7. The total antenna current of an AM transmitter is 5A. If the modulation index is 0.6, calculate
the antenna current when only carrier is sent.
8. The R. M. S. antenna current of an AM transmitter increases by 15% over its un-modulated
value, when sinusoidal modulation by 1KHz signal is applied. Determine the modulation
index.
9. Derive the relationship to calculate power and current for an AM signal.
10. Describes the radio frequency spectrum and its applications according to various frequency
bands.
11. What do you mean by Modulation and explain its need. Modulation reduces the height of
antenna. Justify with an example.
12. Derive the transmission efficiency and total power of amplitude modulated wave assuming
message and carrier wave as sinusoidal wave.
13. The antenna current of an AM broadcast transmitter, modulated to a depth of 40 percent by
an audio sine wave, is 11A. It increases to 12A as a result of simultaneous modulation by
another sine wave. What is the modulation index due to second wave.
DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING
14. a) Define Satellite communication & Radar Communication.
(b) Explain the evolution of mobile communication.
© Overview of wireless communication

You might also like