Bid Number/बोली मांक ( बड सं या) :

GEM/2024/B/5038947
Dated/ दनांक : 11-06-2024

Bid Document/ बड द तावेज़

Bid Details/ बड ववरण

Bid End Date/Time/ बड बंद होने क तार ख/समय 03-07-2024 19:00:00

Bid Opening Date/Time/ बड खुलने क

03-07-2024 19:30:00
तार ख/समय

Bid Offer Validity (From End Date)/ बड पेशकश

120 (Days)
वैधता (बंद होने क तार ख से)

Ministry/State Name/मं ालय/रा य का नाम Ministry Of Chemicals And Fertilizers

Department Name/ वभाग का नाम Department Of Chemicals And Petrochemicals

Central Institute Of Plastics Engineering And Technology

Organisation Name/संगठन का नाम
(cipet)

Office Name/कायालय का नाम Head Office

Total Quantity/कुल मा ा 1

Item Category/मद केटे गर Black Body (35° C to 500° C)

Minimum Average Annual Turnover of the

bidder (For 3 Years)/ बडर का यूनतम औसत 10 Lakh (s)
वा षक टनओवर (3 वष का)

OEM Average Turnover (Last 3 Years)/मूल

10 Lakh (s)
उपकरण िनमाता का औसत टनओवर (गत 3 वष का)

Years of Past Experience Required for

same/similar service/उ ह ं/समान सेवाओं के िलए 3 Year (s)
अपे त वगत अनुभव के वष

MSE Exemption for Years of Experience and

No
Turnover/ अनुभव के वष से एमएसई छूट

Startup Exemption for Years of Experience

No
and Turnover/ अनुभव के वष से टाटअप छूट

Experience Criteria,Past Performance,Bidder

Turnover,Certificate (Requested in ATC),OEM Authorization
Certificate,OEM Annual Turnover,Additional Doc 1
(Requested in ATC),Additional Doc 2 (Requested in
Document required from seller/ व े ता से मांगे ATC),Compliance of BoQ specification and supporting
गए द तावेज़ document
*In case any bidder is seeking exemption from Experience /
Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

1 / 13
 Bid Details/ बड ववरण

Past Performance/ वगत दशन 80 %

Bid to RA enabled/ बड से रवस नीलामी स य कया Yes

RA Qualification Rule H1-Highest Priced Bid Elimination

Type of Bid/ बड का कार Two Packet Bid

Time allowed for Technical Clarifications

during technical evaluation/तकनीक मू यांकन के 2 Days
दौरान तकनीक प ीकरण हे तु अनुमत समय

Inspection Required (By Empanelled

Inspection Authority / Agencies pre- No
registered with GeM)

Evaluation Method/मू यांकन प ित Total value wise evaluation

Financial Document Required/ व ीय द तावेज

Yes
क आव यकता है ।

EMD Detail/ईएमड ववरण

Advisory Bank/एडवाईजर बक State Bank of India

EMD Amount/ईएमड रािश 100000

ePBG Detail/ईपीबीजी ववरण

Advisory Bank/एडवाइजर बक State Bank of India

ePBG Percentage(%)/ईपीबीजी ितशत (%) 5.00

Duration of ePBG required (Months)/ईपीबीजी क

28
अपे त अविध (मह ने).

(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this
Policy./जेम क शत के अनुसार ईएमड छूट के इ छुक बडर को संबंिधत केटे गर के िलए बड के साथ वैध समिथत द तावेज़ तुत करने है ।
एमएसई केटे गर के अंतगत केवल व तुओं के िलए विनमाता तथा सेवाओं के िलए सेवा दाता ईएमड से छूट के पा ह। यापा रय को इस नीित के
दायरे से बाहर रखा गया है ।

(b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable./ईएमड और संपादन
जमानत रािश, जहां यह लागू होती है , लाभाथ के प म होनी चा हए।

Beneficiary/लाभाथ :
Sr. Tech. Officer
CIPET Head Office, Department of Chemicals and Petrochemicals, Central Institute of Plastics Engineering and
Technology (CIPET), Ministry of Chemicals and Fertilizers, Guindy Chennai 600 045
(M Arun Prasad)

2 / 13
Splitting/ वभाजन

Bid splitting not applied/बोली वभाजन लागू नह ं कया गया.

MII Purchase Preference/एमआईआई खर द वर यता

MII Purchase Preference/एमआईआई खर द वर यता Yes

MSE Purchase Preference/एमएसई खर द वर यता

MSE Purchase Preference/एमएसई खर द वर यता Yes

1. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
2. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU for number of Financial years as indicated above in the bid document
before the bid opening date. Copies of relevant contracts to be submitted along with bid in support of having
supplied some quantity during each of the Financial year. In case of bunch bids, the category of primary product
having highest value should meet this criterion.
3. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period
shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old,
the average turnover in respect of the completed financial years after the date of constitution shall be taken into
account for this criteria.
4. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The
buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023.
OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy
for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017.

5. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are
validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small
Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and
its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the
Purchase preference, the bidder must be the manufacturer / OEM of the offered product on GeM. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers
offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in
this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide

3 / 13
eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is
not an MSE and MSE Seller (s) has / have quoted price within L-1+ 15% (Selected by Buyer) of margin of
purchase preference /price band defined in relevant policy, such MSE Seller shall be given opportunity to match
L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are
advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for
compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012
and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is
validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents
submitted.
6. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 80% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU. Copies of relevant contracts (proving supply of
cumulative order quantity in any one financial year) to be submitted along with bid in support of quantity
supplied in the relevant Financial year. In case of bunch bids, the category related to primary product having
highest bid value should meet this criterion.

7. Reverse Auction would be conducted amongst all the technically qualified bidders except the Highest quoting
bidder. The technically qualified Highest Quoting bidder will not be allowed to participate in RA. However, H-1
will also be allowed to participate in RA in following cases:

i. If number of technically qualified bidders are only 2 or 3.

ii. If Buyer has chosen to split the bid amongst N sellers, and H1 bid is coming within N.
iii. In case Primary product of only one OEM is left in contention for participation in RA on elimination of H-1.
iv. If L-1 is non-MSE and H-1 is eligible MSE and H-1 price is coming within price band of 15% of Non-MSE L-1
v. If L-1 is non-MII and H-1 is eligible MII and H-1 price is coming within price band of 20% of Non-MII L-1

Excel Upload Required/ए सेल म अपलोड कए जाने क आव यकता :

Technical Compliance sheet - 1718110812.xlsx

Black Body (35° C To 500° C) ( 1 pieces )

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively/ मशः ण
े ी 1 और ण
े ी 2 के थानीय आपूितकता के प म अहता ा करने के िलए आव यक)

Technical Specifications/तकनीक विश याँ

Buyer Specification
Download
Document/ े ता विश द तावेज़

Additional Specification Documents/अित र विश द तावेज़

DrawingDocument1 View

DrawingDocument2 View

DrawingDocument3 View

Consignees/Reporting Officer/परे षती/ रपो टग अिधकार and/ तथा Quantity/मा ा

4 / 13
 Consignee
S.No./ . Reporting/Officer/ Delivery Days/ डलीवर के
परे षती/ रपो टग Address/पता Quantity/मा ा
सं. दन
अिधकार

751024,The Principal Scientist

& Head B - 25, CNI Complex,
Bhubaneswar – 751024 Tel No:
+91-674-2740173, + 91-674-
2742852 Fax No: +91-674-
Akshaya Kumar 2740463, Email:
1 1 45
Palai [email protected],
[email protected] B/25,
CNI Complex, Patia,
Bhubaneswar – 751024,
Odisha, GST No.
21AAAAC0606R4ZY

Buyer Added Bid Specific Terms and Conditions/ े ता ारा जोड़ गई बड क वशेष शत

1. Generic

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 25% of the contracted quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.

2. Generic

Actual delivery (and Installation & Commissioning (if covered in scope of supply)) is to be done at
following address

The principal Director & Head

As per Consignee Address
As per Consignee Address
As per Consignee Address
As per Consignee Address
.

3. Generic

Bidder financial standing: The bidder should not be under liquidation, court receivership or similar
proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

4. Generic

Bidders shall quote only those products (Part of Service delivery) in the bid which are not obsolete in the
market and has at least 5 years residual market life i.e. the offered product shall not be declared end-of-
life by the OEM before this period.

5. Generic

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any
responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates
(whichever is lower), subject to the maximum of quoted GST %.

6. Generic

Buyer Organization specific Integrity Pact shall have to be complied by all bidders. Bidders shall have to

5 / 13
 upload scanned copy of signed integrity pact as per Buyer organizations policy along with bid. Click here
to view the file

7. Generic

Bidder shall submit the following documents along with their bid for Vendor Code Creation:

a. Copy of PAN Card.

b. Copy of GSTIN.

c. Copy of Cancelled Cheque.

d. Copy of EFT Mandate duly certified by Bank.

8. Generic

Data Sheet of the product(s) offered in the bid, are to be uploaded along with the bid documents. Buyers
can match and verify the Data Sheet with the product specifications offered. In case of any unexplained
mismatch of technical parameters, the bid is liable for rejection.

9. Generic

Experience Criteria: The Bidder or its OEM {themselves or through reseller(s)} should have regularly,
manufactured and supplied same or similar Category Products to any Central / State Govt Organization /
PSU / Public Listed Company for 3 years before the bid opening date. Copies of relevant contracts to be
submitted along with bid in support of having supplied some quantity during each of the year. In case of
bunch bids, the primary product having highest value should meet this criterion.

10. Generic

For hazardous chemical/item, all precautionary measure as per regulation from the point of
transportation/ handling/ storage/ safety/ health/ environment to be undertaken/ specified before
dispatch. During dispatch, proper symbol for the hazard/ MSDS/ Batch No./ date of manufacturing/ Gross
Weight/ Net Weight/ shelf Life etc are to be written/ printed/ pasted on the body of the packing.

11. Generic

Installation, Commissioning, Testing, Configuration, Training (if any - which ever is applicable as per scope
of supply) is to be carried out by OEM / OEM Certified resource or OEM authorised Reseller.

12. Generic

Manufacturer Authorization:Wherever Authorised Distributors/service providers are submitting the

bid, Authorisation Form /Certificate with OEM/Original Service Provider details such as name, designation,
address, e-mail Id and Phone No. required to be furnished along with the bid

13. Generic

OPTIONAL SITE VISIT:

1. The Bidder is advised to visit and examine the installation site and its surroundings and obtain for itself
on its own responsibility all information that may be necessary for preparing the Bid. The costs of visiting
the site shall be borne by the Bidder.

Yes

2. The Bidder representative shall be allowed entry upon consignee premises for such visits, only upon
the express conditions that the Bidder will release and indemnify the Buyer and Consignee against all
liabilities arising out of such visit including death or injury, loss or damage to property, and any other loss,
damage, costs, and expenses incurred as a result of such visit.

3. The Bidder shall not be entitled to hold any claim against Buyer for noncompliance due to lack of any
kind of pre-requisite information as it is the sole responsibility of the Bidder to obtain all the necessary

6 / 13
 information with regard to site, surrounding, working conditions, weather etc. on its own before
submission of the bid.

14. Generic

Scope of supply includes Training: Number of employees to be trained

3
, Place for Training
CIPET SARP LARPM Bhubaneswar
and Duration of training
3
days.

15. Generic

Supplier shall ensure that the Invoice is raised in the name of Consignee with GSTIN of Consignee only.

16. Generic

The successful bidder has to supply all essential accessories required for the successful installation and
commissioning of the goods supplied. Besides standard accessories as per normal industry practice,
following accessories must be part of supply and cost should be included in bid price:

The Scope of supply should include the supply of the equipment as per the Technical Specification sheet wi
th standard accessories for running of the Machine which includes Packaging, Forwarding and Delivery at t
he destination CIPET User Centres with Commissioning, Installation, Warranty and Training
.

17. Generic

1. The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of
buyer.
2. The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior
written consent of buyer.
3. The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severally
liable and responsible to buyer together with the assignee/ sub-contractor, for and in respect of the due
performance of the Contract and the Sellers obligations there under.

18. Generic

Without prejudice to Buyer’s right to price adjustment by way of discount or any other right or remedy
available to Buyer, Buyer may terminate the Contract or any part thereof by a written notice to the Seller,
if:
i) The Seller fails to comply with any material term of the Contract.
ii) The Seller informs Buyer of its inability to deliver the Material(s) or any part thereof within the
stipulated Delivery Period or such inability otherwise becomes apparent.
iii) The Seller fails to deliver the Material(s) or any part thereof within the stipulated Delivery Period
and/or to replace/rectify any rejected or defective Material(s) promptly.
iv) The Seller becomes bankrupt or goes into liquidation.
v) The Seller makes a general assignment for the benefit of creditors.
vi) A receiver is appointed for any substantial property owned by the Seller.
vii) The Seller has misrepresented to Buyer, acting on which misrepresentation Buyer has placed the
Purchase Order on the Seller.

19. Generic

While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the
screenshot of GST portal confirming payment of GST.

20. OEM

IMPORTED PRODUCTS: In case of imported products, OEM or Authorized Seller of OEM should have a
registered office in India to provide after sales service support in India. The certificate to this effect should

7 / 13
 be submitted.

21. Inspection

Pre-dispatch inspection at Seller premises (Fee/Charges to be borne by the BUYER): Before

dispatch, the goods will be inspected by Buyer / Consignee or their Authorized Representative or by
Nominated External Inspection Agency (independently or jointly with Buyer or Consignee as decided by
the Buyer) at Seller premises (or at designated place for inspection as declared / communicated by the
seller) for their compliance to the contract specifications. Fee/Charges taken by the External inspection
Agency and any external laboratories testing charges shall be borne by the Buyer. For in-house testing,
the Sellers will provide necessary facilities free of cost. Seller shall notify the Buyer through e-mail about
readiness of goods for pre-dispatch inspection and Buyer will notify the Seller about the Authorized
Representative/ Nominated External Inspection Agency and the date for testing. The goods would be
dispatched to consignee only after clearance in pre-dispatch inspection. Consignee's right of rejection as
per GTC in respect of the goods finally received at his location shall in no way be limited or waived by
reason of the goods having previously been inspected, tested and passed by Buyer/ Consignee or its
Nominated External Inspection Agency prior to the goods' shipment. While bidding, the sellers should take
into account 7 days for inspection from the date of email offering the goods for inspection. Any delay in
inspection beyond 7 days shall be on the part of the buyer and shall be regularised without Liquidated
Damages.
When there is requirement of submission the advance sample, the seller shall inform the buyer promptly
through emails about the date of submission of sample to the buyer nominated Inspection agency.

22. Forms of EMD and PBG

Bidders can also submit the EMD with Account Payee Demand Draft in favour of

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY

payable at
At Chennai
.
Bidder has to upload scanned copy / proof of the DD along with bid and has to ensure delivery of hardcopy
to the Buyer within 5 days of Bid End date / Bid Opening date.

23. Forms of EMD and PBG

Bidders can also submit the EMD with Payment online through RTGS / internet banking in Beneficiary
name

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY

Account No.
419413414
IFSC Code
IDIB000G020
Bank Name
INDIAN BANK
Branch address
P.B. No.3171, Sidco Building, GST Road, Guindy, Chennai . Tamilnadu
.
Bidder to indicate bid number and name of bidding entity in the transaction details field at the time of on-
line transfer. Bidder has to upload scanned copy / proof of the Online Payment Transfer along with bid.

24. Forms of EMD and PBG

Successful Bidder can submit the Performance Security in the form of Account Payee Demand Draft also
(besides PBG which is allowed as per GeM GTC). DD should be made in favour of

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY

payable at
At Chennai
. After award of contract, Successful Bidder can upload scanned copy of the DD in place of PBG and has to
ensure delivery of hard copy to the original DD to the Buyer within 15 days of award of contract.

25. Forms of EMD and PBG

8 / 13
 Successful Bidder can submit the Performance Security in the form of Fixed Deposit Receipt also (besides
PBG which is allowed as per GeM GTC). FDR should be made out or pledged in the name of

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY

A/C (Name of the Seller). The bank should certify on it that the deposit can be withdrawn only on the
demand or with the sanction of the pledgee. For release of Security Deposit, the FDR will be released in
favour of bidder by the Buyer after making endorsement on the back of the FDR duly signed and stamped
along with covering letter. Successful Bidder has to upload scanned copy of the FDR document in place of
PBG and has to ensure delivery of hard copy of Original FDR to the Buyer within 15 days of award of
contract.

26. Forms of EMD and PBG

Successful Bidder can submit the Performance Security in the form of Payment online through RTGS /
internet banking also (besides PBG which is allowed as per GeM GTC). On-line payment shall be in
Beneficiary name

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY

Account No.
419413414
IFSC Code
IDIB000G020
Bank Name
INDIAN BANK
Branch address
P.B. No.3171, Sidco Building, GST Road, Guindy, Chennai . Tamilnadu
. Successful Bidder to indicate Contract number and name of Seller entity in the transaction details field at
the time of on-line transfer. Bidder has to upload scanned copy / proof of the Online Payment Transfer in
place of PBG within 15 days of award of contract.

27. Scope of Supply

Scope of supply (Bid price to include all cost components) : Supply Installation Testing Commissioning of
Goods and Training of operators and providing Statutory Clearances required (if any)

28. Certificates

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.

29. Certificates

To be eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the
date of bid opening (to be uploaded with bid):

Along with Price Bid

.

30. Buyer Added Bid Specific ATC

Buyer Added text based ATC clauses

Additional Terms & Conditions To be signed and upload in T

echnical bid
Sl. No.

The Technical Specification Sheet is attached in the buyer specifications. All the bidder .
1
s has to fill and upload the same for considering the bid in technical evaluation.

Payment –100% on Successful Delivery, Commissioning, Installation, and Trai

2 ning of the machine / equipment. This is in supersession of GeM payment ter
ms & conditions.

9 / 13
 The bidders should completely read the Bid documents provided in the Additional Spe
cification Document of this Bid before participating. This will also a part of Bid Docume
3 nt. All the supporting documents for Qualification criteria in Bid document to be submit
ted as per Section IX

If the Bidder has already supplied / received a order to supply any equipment / machin
e to CIPET in the last 5 years the performance, timeline and quality of supply and servic
es will be considered as qualifying criteria.
4
If the the P.O is not executed by the supplier after the due date of Delivery period or t
he equipment / machine supplied to any CIPET centre is not satisfactory, their bids shal
l not be considered for this Bid evaluation.

Comprehensive Warranty: Onsite warranty Mandatory at the Consignee location for the
5 period as specified in the technical Bid sheet. Warranty will be started from the date of
Successful installation only.

Mandatory Documents to be submitted, filled with seal and sign & upload the same as
per the formats provided in the bid document for considering the Bid in Technical Evalu
ation.

1. Certificate of Registration for GST - Bidder organization certific

ate
2. Auditor Certificate confirming the Turnover for the past three
years 2020-21, 2021-22 & 2022-23 - Separate One page Audito
r Certificate confirming the turnover
3. Certificate of Registration for NSIC /MSME /Startup - Others if a
pplicable
4. Technical Compliance sheet with supporting Technical Catalog
ue / Brochures / Leaflet clearly mentioning the Model number,
name of equipment and technical details.
5. Bid Form _ Section VI as per the format in Tender Document.
6. Authorization certificate from OEM _ If not a Manufacturer for t
he machine or equipment _Section - V as per the format in Ten
der Document.
7. Submit the Pre installation requirement of the Machinery/equi
pment and the space required and condition of flooring and an
y other requirements for installation of the Machinery/equipme
nt.
8. Scope of Supply of the equipment / BOQ _ Packing List _each a
nd every part of the equipment and standard accessories to ru
6 n the machine as per Section – III as per the format in Tender D
ocument.
9. Performa for performance of previous supply _ Section – IX-A a
s per the format in Tender Document.
10. Client Certificate for Past Three year’s supplies of similar same
goods _equipment’s and satisfactory performance – Section – I
X – B ----- as per the format in Tender Document
11. Proforma for Deviation Statement _Section – X_ as per the for
mat in Tender Document.

10 / 13
 12. Declaration - Land border with India _Section – XI_ ------ as per
the format in Tender Document.
13. Preference to “MAKE IN INDIA” Policy _Section-XII_ ----- as per t
he format in Tender Document.
14. Integrity Pact – Section – XIII.
15. Bid Security Undertaking – Section – XIV.
16. Self-Declaration – For Not Blacklisting, Not under Liquidation,
Court receivership or similar Proceedings, Not under Bankrupt.
– Section – XIV A.
17. Format for EMD Bank Guarantee – Section - XV
18. Price Break up Details (To be given the Letter Head and uploa
ded in the Commercial Bid Only) – Section – XV - A

A Bidder requiring any clarification regarding the Tender Document may ask their repre
sentation through GeM portal only and contact to Sr Tech Officer at 044- 22254788 / 22
7 254780 - extension 240, before 10 days of the deadline for the bid submission. This dea
dline shall not be extended in case of any intervening holidays.

Pre-Delivery Inspection: (i). Prior intimation (minimum two weeks before) and co-ordina
tion with respective CIPET centres for pre-delivery inspection (working condition of the
equipment / machinery in all respect as per the technical specification of the Tender) at
8 Original Equipment Manufacturer’s / Supplier’s site. (ii). Pre Delivery Inspection (PDI) w
ill be conducted at Supplier site in India, by CIPET officials on receipt of confirmation fro
m the supplier on readiness of equipment. (iii)During the PDI, for demonstration of the
machine specifications, the raw material has to arrange by the Supplier.

The Cost of the equipment should include the components of cost for supply as per the
Technical Specification and standard accessories for running of the Machine Commissio
9 ning, Installation, Warranty and Training for Min. 3 Days, Packaging, Forwarding and De
livery at the destination CIPET User Centres. The prices break up details as per section
to be uploaded in commercial bid only.

Relaxation in Prior Turnover and Experience: CIPET reserves its ri

ght to relax the condition of prior turnover and prior experience f
10 or start-up enterprises subject to meeting of quality & technical s
pecifications. The decision of the CIPET in this regard shall be fina
l.

CIPET reserves the right to accept or reject any or all tenders either in part or in full wit
hout assigning any reasons thereof. No conditional bids on any case will be not conside
11 red.

Buyer Added Bid Specific ATC 31.

Buyer uploaded ATC document Click here to view the file .

32. Service & Support

Dedicated /toll Free Telephone No. for Service Support : BIDDER/OEM must have Dedicated/toll Free
Telephone No. for Service Support.

33. Warranty

11 / 13
 Warranty period of the supplied products shall be 2 years from the date of final acceptance of goods or
after completion of installation, commissioning & testing of goods (if included in the scope of supply), at
consignee location. OEM Warranty certificates must be submitted by Successful Bidder at the time of
delivery of Goods. The seller should guarantee the rectification of goods in case of any break down during
the guarantee period. Seller should have well established Installation, Commissioning, Training,
Troubleshooting and Maintenance Service group in INDIA for attending the after sales service. Details of
Service Centres near consignee destinations are to be uploaded along with the bid.

34. Warranty

Over and above the normal Warranty terms as per GeM GTC, the successful bidder / OEM shall have to
provide Comprehensive Warranty during the entire Standard warranty period as per contract. : The
comprehensive warranty shall be covering the following scope

Machine problem should be rectified at the consignee site

(Upload an undertaking with the bid confirming compliance by the bidder if Bidder is taking onus of this
compliance. In case OEM is taking onus of this compliance, OEM undertaking is to be uploaded along with
Bidder undertaking)

35. Warranty

Successful bidder will have to ensure that adequate number of dedicated technical service personals /
engineers are designated / deployed for attending to the Service Request in a time bound manner and for
ensuring Timely Servicing / rectification of defects during warranty period, as per Service level agreement
indicated in the relevant clause of the bid.

36. Warranty

Timely Servicing / rectification of defects during warranty period: After having been notified of the defects
/ service requirement during warranty period, Seller has to complete the required Service / Rectification
within 3 days time limit. If the Seller fails to complete service / rectification with defined time limit, a
penalty of 0.5% of Unit Price of the product shall be charged as penalty for each week of delay from the
seller. Seller can deposit the penalty with the Buyer directly else the Buyer shall have a right to recover all
such penalty amount from the Performance Security (PBG).Cumulative Penalty cannot exceed more than
10% of the total contract value after which the Buyer shall have the right to get the service / rectification
done from alternate sources at the risk and cost of the Seller besides forfeiture of PBG. Seller shall be
liable to re-imberse the cost of such service / rectification to the Buyer.

37. Past Project Experience

Proof for Past Experience and Project Experience clause: For fulfilling the experience criteria any
one of the following documents may be considered as valid proof for meeting the experience criteria:a.
Contract copy along with Invoice(s) with self-certification by the bidder that service/supplies against the
invoices have been executed.b. Execution certificate by client with contract value.c. Any other document
in support of contract execution like Third Party Inspection release note, etc.Proof for Past Experience and
Project Experience clause: For fulfilling the experience criteria any one of the following documents may be
considered as valid proof for meeting the experience criteria:a. Contract copy along with Invoice(s) with
self-certification by the bidder that service/supplies against the invoices have been executed.b. Execution
certificate by client with contract value.c. Any other document in support of contract execution like Third
Party Inspection release note, etc.

38. Past Project Experience

The Bidder / OEM {themselves or through reseller(s)}, should have executed project for supply and
installation / commissioning of same or similar Category Products during preceding 3 financial years (i.e.
current year and three previous financial years) as on opening of bid, as per following criteria:

(i) Single order of at least 35% of estimated bid value; or

(ii) Two orders of at least 20% each of estimated bid value; or
(iii) Three orders of at least 15% each of estimated bid value.
Satisfactory Performance certificate issued by respective Buyer Organization for the above Orders should
be uploaded with bid. In case of bunch bids, the Category related to primary product having highest bid
value should meet this criterion

12 / 13
Disclaimer/अ वीकरण

The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization, whereby Buyer organization is solely responsible for the impact of these clauses
on the bidding process, its outcome, and consequences thereof including any eccentricity / restriction arising in
the bidding process due to these ATCs and due to modification of technical specifications and / or terms and
conditions governing the bid. If any clause(s) is / are incorporated by the Buyer regarding following, the bid and
resultant contracts shall be treated as null and void and such bids may be cancelled by GeM at any stage of
bidding process without any notice:-

1. Definition of Class I and Class II suppliers in the bid not in line with the extant Order / Office Memorandum
issued by DPIIT in this regard.
2. Seeking EMD submission from bidder(s), including via Additional Terms & Conditions, in contravention to
exemption provided to such sellers under GeM GTC.
3. Publishing Custom / BOQ bids for items for which regular GeM categories are available without any
Category item bunched with it.
4. Creating BoQ bid for single item.
5. Mentioning specific Brand or Make or Model or Manufacturer or Dealer name.
6. Mandating submission of documents in physical form as a pre-requisite to qualify bidders.
7. Floating / creation of work contracts as Custom Bids in Services.
8. Seeking sample with bid or approval of samples during bid evaluation process. (However, in bids for
attached categories, trials are allowed as per approved procurement policy of the buyer nodal Ministries)
9. Mandating foreign / international certifications even in case of existence of Indian Standards without
specifying equivalent Indian Certification / standards.
10. Seeking experience from specific organization / department / institute only or from foreign / export
experience.
11. Creating bid for items from irrelevant categories.
12. Incorporating any clause against the MSME policy and Preference to Make in India Policy.
13. Reference of conditions published on any external site or reference to external documents/clauses.
14. Asking for any Tender fee / Bid Participation fee / Auction fee in case of Bids / Forward Auction, as the
case may be.

Further, if any seller has any objection/grievance against these additional clauses or otherwise on any aspect of
this bid, they can raise their representation against the same by using the Representation window provided in
the bid details field in Seller dashboard after logging in as a seller within 4 days of bid publication on GeM. Buyer
is duty bound to reply to all such representations and would not be allowed to open bids if he fails to reply to
such representations.

This Bid is also governed by the General Terms and Conditions/ यह बड सामा य शत के अंतगत भी शािसत है

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action

in accordance with the laws./ जेम क सामा य शत के खंड 26 के संदभ म भारत के साथ भूिम सीमा साझा करने वाले दे श के बडर से खर द
पर ितबंध के संबंध म भारत के साथ भूिम सीमा साझा करने वाले दे श का कोई भी बडर इस िन वदा म बड दे ने के िलए तभी पा होगा
जब वह बड दे ने वाला स म ािधकार के पास पंजीकृ त हो। बड म भाग लेते समय बडर को इसका अनुपालन करना होगा और कोई भी
गलत घोषणा कए जाने व इसका अनुपालन न करने पर अनुबंध को त काल समा करने और कानून के अनुसार आगे क कानूनी कारवाई
का आधार होगा।

---Thank You/ ध यवाद---

13 / 13