0% found this document useful (0 votes)
70 views1 page

YS Material Data Sheet For PPH

Uploaded by

Anindra Farras
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
70 views1 page

YS Material Data Sheet For PPH

Uploaded by

Anindra Farras
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Shandong Yasu New Material Co.

, Ltd
No.1266, Sanba East Road, Tianqu Industrial Park,
Dezhou City, Shandong Province, China 253000
E: [email protected] W: www.ysplastics.com

PP-H / Polypropylene Homopolymer

Special properties Typical areas of application


· Excellent chemical resistance · Chemical engineering & tankbuilding
· High weldability · Ventilation & duct systems
· High impact strength · Pump parts

Technical Data Sheet

Physical properties Test Standard Value Unit

Density ASTM D792 0.91-0.93 g/cm³


Water Absorption ASTM D570 <0.10 %

Mechanical properties Test Standard Value Unit

Hardness ASTM D2240 72 Shore D


Tensile Strength at yield 23℃ ASTM D638 4700 psi
Coefficient of Friction, Dynamic - 0.25-0.28 -
Izod Impact, Notched ASTM D256 1.0 ft-lb/in

Thermal properties Test Standard Value Unit

Maximum Service Temperature, Air - 83 ℃


Melting Point ASTM D3418 163 ℃
Heat Deflection Temperature ASTM D648 100 ℃
Flammability, UL94 - HB -

Electrical Properties Test Standard Value Unit

Surface Resistivity ASTM D257 ≥1014 Ω/cm


Dielectric Constant ASTM D150 2.4 1MHz
Dielectric Strength ASTM D149 45 KV/mm

Note:
*The data stated above are typical values intended for reference and comparison purposes only.
*The data should not be used as a basis for design specifications or quality control.
*The information is provided as a guide to the best of our knowledge and given without obligation or liability.
*Testing under individual application circumstances is recommended.

www.ysplastics.com Page:1 / 1

You might also like