Rotary Shafts MISUMIUSA.

COM
FIND IT AND CONFIGURE ON THE WEB

Rotary Shafts
Rotary Shafts

Rotary Shafts
Rotary Shafts – Rotary Shafts – Retaining Ring Grooves Driving Shafts – One End Stepped, Driving Shafts –
PRODUCT NAME Rotary Shafts – Straight Rotary Shafts – Straight with Keyways Driving Shafts – Both Ends Stepped Driving Shafts – with Flange
Retaining Ring Grooves on Both Ends on Both Ends with Keyways One End Double Stepped One End Stepped with Flange
PAGE NUMBERS 854 856 858 860 904 906 908 910

D Tolerance h9 (Cold-Drawn) / h7 (Ground) Detailed Retaining Ring Groove Dimensions

Economy type h9 (Cold-Drawn) and standard grade Rotary & Driving Shafts
h7 (Ground) are now available.

Shaft Diameter
Standard Model: SFMR P.854–886

d
Slot Width (m)
Rotary Shafts – One End Tapped Rotary Shafts – One End Tapped with Keyways Rotary Shafts – Both Ends Tapped Rotary Shafts – Both Ends Tapped with Keyways Rotary Shafts with Keyways have been standardized.
Shaft Slot Width (m) Applicable
d Tolerance
862 864 866 868 Rotary Shafts with Keyways have been standardized. Diameter Tolerance Retaining Ring

Specification has become easier. 2 1.2 0.4 JIS E Type 1.2

+0.05
2.5 1.5 +0.06 JIS E Type 1.5
Standard Model: SFMKR P.856, 860, 864, 868 3 2 0
0.5 0
JIS E Type 2
4 3 JIS E Type 3
5 4 0.7 JIS E Type 4
+0.075
6 5 +0.1 JIS E Type 5
0
Accuracy Standards of Rotary Shafts & Driving Shafts Values in ( ) are for driving shafts 7
8
6
7 + 0.09 0.9
0 JIS E Type 6
JIS E Type 7
Not applicable to h9 (Cold-Drawn). 9 8 0 JIS E Type 8
10 9.6 0/-0.09 JIS C Type 10
Circularity, Straightness Circularity of Part D Tolerances of L, Y & Other Dimensions
Rotary Shafts – 11 10.5 JIS C Type 11
Rotary Shafts – One End Stepped Rotary Shafts – One End Stepped, One End Tapped Rotary Shafts – One End Stepped & Threaded D Circularity Dimension Dimension
One End Stepped and Threaded, One End Tapped 12 11.5 JIS C Type 12
Over To M Over To Tolerance
870 872 874 876 2 2.5 0.006 (0.003) 2 6 ±0.1 (±0.1) 13 12.4 JIS C Type 13
1.15
3 13 0.004 (0.003) 6 30 ±0.2 (±0.1) 14 13.4 JIS C Type 14
M - 0.01/100 13 20 0.005 (0.003) 30 120 ±0.3 (±0.1) 0 + 0.14
15 14.3 JIS C Type 15
20 40 0.006 (0.005) 120 400 ±0.5 (±0.2) - 0.11 0
40 50 0.007 (0.005) 400 1000 ±0.8 (±0.2) 16 15.2 JIS C Type 16
17 16.2 JIS C Type 17
! 
Straightness of size D2, Circularity of Driving Shafts Straight Type
18 17 JIS C Type 18
D2.5 is 0.1/100. KZAN, KZAC and KZAP is the same as that of rotary shafts. 1.35
19 18 JIS C Type 19
20 19 JIS C Type 20
Concentricity, Perpendicularity (Y) 21 20 JIS C Type 21
22 21 JIS C Type 22

D
P

D
P
D
D
P
23 22 1.35 JIS C Type 23
(0.01) (0.01) 24 22.9 0 JIS C Type 24
Rotary Shafts – (0.01) (0.01)
Rotary Shafts – One End Stepped and Tapped Rotary Shafts – Both Ends Stepped Rotary Shafts – Both Ends Stepped and Threaded 0.05 0.05 25 - 0.21
One End Stepped, Both Ends Tapped 0.05 0.05 23.9 JIS C Type 25
878 880 882 884 For the Driving Shafts Straight (Ø0.01) (Ø0.01) (Ø0.01) 26 24.9 JIS C Type 26
Type KZAN, KZAC and KZAP is Ø0.06 Ø0.06 Ø0.06 28 26.6 JIS C Type 28
+ 0.14
0.05 29 27.6 JIS C Type 29
0
30 28.6 1.65 JIS C Type 30
32 30.3 JIS C Type 32
Detailed Dimensions for Keyway & Threaded Relief 35 33
0
JIS C Type 35

of Rotary Shafts & Driving Shafts 40

45
38
42.5
- 0.25 1.9
JIS C Type 40
JIS C Type 45
Detailed dimensions of Keyway for Shaft Dia. (D·P·Q) 50 47 2.2 JIS C Type 50
b b t

1.6
Shaft Diameter Reference Tolerance Reference r
Tolerance

1.6

t
6.3 Dimension (N9) Dimension
Rotary Shafts – Rotary Shafts – Rotary Shafts – Rotary Shafts –
Both Ends Stepped and Tapped One End Stepped with Retaining Ring Groove Both Ends Stepped with Retaining Ring Grooves Both Ends Stepped, One End Threaded 6– 7 2 - 0.004 1.2 Ex.)
r 8–10 3 1.8
0.08– !  example below shows the
The
886 888 888 890 - 0.029 +0.1 0.16 keyway shape for the specs
11–12 4 0 2.5
13–17 5 3.0 0 KC, WKC, K=0, KC+A≥L and
- 0.03 0.16– WKC+C+K+E>L.
18–22 6 3.5
23–30 8 0 4.0 0.25
31–38 10 - 0.036 5.0 +0.2
0.25–
39–44 12 0 5.0 0
45–50 14 5.5 0.4
- 0.043

Rotary Shafts Thread Undercut (PC/Q C) Dimensions (Reference) Rotary Shafts Detailed Hex Socket Dimensions
When Thread undercut machining (PC/Q C) is specified, PC/Q C dimension is as shown in the table below. for Shaft Dia. D
As for the PC and QC Dimensions for the Fine Thread alteration (PMC/Q MC), also refer to the tables below. b h

Rotary Shafts – Both Ends Double Stepped Hollow Rotary Shafts – Straight Rotary Shafts – D-Cut Shaft for Tension – Pull – Retaining Ring Groove Coarse Thread Combined with Fine Thread Alteration
892 893 894 895 M B P (=M) PC PMC PC

D
Q (=N) QC QMC QC
PC 3 2.4 3 2.4
P

4 3.2 4 3.2
F 5 4.1 5 4.1 Shaft Diameter b h
6 4.4 6 4.8 6– 7 2.5 4
S N 8 6.0 8 6.4 8– 9 3 5
10 7.7 10 8.4 10–11 4 6
12 9.4 12 10.4
QC

12–15 5 8
16 13.0 15 13.4
T 16–19 6 9
20 16.4 17 15.4
24 19.6 20 18.4 20–24 8 12
Shaft for Tension – Push Type / Pull Type Rotary Shafts – End Shape Selectable Driving Shafts – Straight Driving Shafts – One End Stepped 25–30 10 15
30 25.0 25 22.7
896 898 900 902 30 27.7

852 There’s more on the web: misumiusa.com Check out misumiusa.com for the most current pricing and lead time. 853