Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    1.04 Plain ceiling-L09LTAHDM701

    Uploaded by

    SK Emran Ali

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1.04 Plain ceiling-L09LTAHDM701

    Uploaded by

    SK Emran Ali
    9 views2 pages

    Original Title

    1.04 Plain ceiling-L09LTAHDM701 (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views2 pages

    1.04 Plain ceiling-L09LTAHDM701

    Uploaded by

    SK Emran Ali

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Item No – 1.

    04
    Plain Gypsum Ceiling
    No Material Type Tender Specification Gyproc Specification
    Density 790Kg/M3 Density 800-810Kg/M3
    Thikness 12.5mm Thikness 12.5mm
    IS 2095- IS 2095-
    Code Code
    Part 1:2011 Part 1:2011

    Fireline Maintained water Maintained water


    1
    12.5mm absorption below 10% absorption below 10%
    Water Absorption: according to the Standards Water Absorption: according to the Standards
    EN- EN-
    520 & ASTM C 1396 for 520 & ASTM C 1396 for
    Moisture resistant boards. Moisture resistant boards.
    Edge Tapared/Squre Edge Tapared/Squre
    2 Strenth Yield strength 260Mpa Yield strength 260Mpa
    GI (IS-513), YS-300Mpa GI (IS-513), YS-260Mpa
    Making Of , Finish-Galvanized Making Of , Finish-Galvanized
    1 Metal
    150GSM (IS-277) 150GSM (IS-277)
    Pettern Serrated Pettern Serrated
    Perimeter Thikness 0.5 Thikness 0.5
    Ceiling Angle Thikness 0.5 Thikness 0.5
    2
    Intermediate Thikness 0.9 Thikness 0.9
    Ceiling Section Thikness 0.5 Thikness 0.5

    Ø8 x 45mm Ø8 x 45mm
    Rawl Plug Rawl Plug
    having pull out load- 6.8kN having pull out load- 6.8kN
    CR1 grade (Is-513), CR2 grade (Is-513),
    Soffit Cleat zinc coating (7 to 8 Soffit Cleat zinc coating (7 to 8
    microns) microns)
    Material–As per Material–As per
    M6 x 12mm EN 10083 finish – zinc M6 x 12mm EN 10083 finish – zinc
    plating plating
    Ø4.2x13 metal to metal Ø4.2x13 metal to metal
    screw made out of carbon screw made out of carbon
    Metal to Metal Screw steel as per EN-ISO Metal to Metal Screw steel as per EN-ISO
    3 Hardware 7049/50 having minimum 7049/50 having blue zinc
    4 micron zinc coating. coating.
    25mm Drywall Screw 25mm Drywall Screw
    Gypsum Screw carbon steel EN-ISO Gypsum Screw carbon steel EN-ISO
    7049/50 7049/50
    Material-High carbon Material-High carbon
    spring steel spring steel
    wire (BS970 Gr. En 42, 46- wire (BS970 Gr. En 42, 46-
    Connectng Clip Connectng Clip
    48 HRC, 48 HRC,
    Finish-Zinc plating 4-6 Finish-Zinc plating 4-6
    micron) micron)
    Jointing Compound conforms to ASTM C475 Jointing Compound conforms to ASTM C475
    Jointing Tap conforms to ASTM C475 Jointing Tap conforms to ASTM C475
    Re-marks: All products PDS and supporting Document attached

    You might also like