MGT 80 en

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

MGT-80 GAS TURBINE

MAPNA TURBINE ENGINEERING & MANUFACTURING Co. (TUGA)


An abundant source of power
Advanced MGT-80 heavy-duty gas turbine with Siemens technology licensing of SGT5-4000F
gas turbine, offers significantly high nominal power output of 308 MW and gross efficiency of
up to 40.1% and 60% in simple and combined cycle applications respectively. MGT-80 is an
environmentally friendly product with minimized NOx and CO emissions. The smooth, reliable
and robust performance of the MGT-80 as well as longer maintenance intervals and extended
lifetime allow clients to reap the benefits of its unique features while reducing fuel consumption
and maintenance costs. In addition to electrical power generation, the MGT-80 can be used in
Combined Heat and Power (CHP) plants and large scale desalination plants as well.

Product Specifications
No. Parameters Unit Value
1 Gross Power Output* MW 308
2 Gross Efficiency* % 40.1
3 Shaft Speed rpm 3000
4 Exhaust Gas Temperature °C 581
5 Exhaust Mass Flow Rate kg/s 724
6 No. of Compressor Stages EA 15
7 No. of Turbine Stages EA 4
8 Pressure Ratio - 19
9 Type of Combustors - Annular, 24 Burners
10 NOx Emissions ppmvd@15%O2 25
11 CO Emissions ppmvd@15%O2 80
12 Frequency Hz 50
13 Weight (Core Engine) tonnes 312
14 Dimensions (Length×Width×Height) m 10.8 x 5.2 x 4.8
* Nominal Power at ISO Conditions.

Key Features
• Exceptionally high power output and efficiency
• Highly durable, easy-to-retrofit, compatible design
• Annular combustion chamber with 24 flashback-free hybrid burners
• Fuel flexibility and fast online fuel change over
• Fast start up and shut down (less than 30 min)
• Quick response to grid requirements

2 MGT-80 GAS TURBINE


• Flexibility in covering peak, base and partial loads
• World-class cold and hot restart capability
• Minimized pollution emission and compliance with emission limits even in partial-load
operation
• High reliability and availability (in excess of 99% and 95%, respectively)
• Prolonged maintenance intervals and low operating costs
• Two rotor bearings
• Cold end generator drive
• Disk-type rotor assembly with Hirth serrations and central tie rod enabling easy rotor
destacking on site

Advanced Technologies
Some of the main advanced technologies used in the design and manufacturing of MGT-80
heavy duty gas turbine are as follows:

3D Turbine Blading and Flow Path Design


• Ensuring the best aerodynamic performance
Single-crystal Blades
• Used in manufacturing the first stage turbine blades
Directionally Solidified Blades
• Used in manufacturing the second stage turbine blades
Thermal Barrier Coated (TBC) and Film Cooled Hot Gas Path and Gas Turbine
Blades
• Allowing much higher efficiency and longer lifetime of the machine
Hydraulic Clearance Optimization (HCO)
• Automatic rotor clearance tuning with an active control scheme to reduce clearance
losses at start up and shutdown

Advanced Annular Walk-in Combustion Chamber


• Allowing easy maintenance with individually replaceable ceramic heat shields
Dry-Low-NOx Hybrid burners
• Minimized pollution emission levels with gaseous and liquid fuels

MAPNA TURBINE ENGINEERING & MANUFACTURING Co. (TUGA) 3


© MAPNA Group 2022

Factory: Head Office


www.mapnaturbine.com
Mapna blvd., Fardis, Karaj, 231 Mirdamad Ave., Tehran, I.R. Iran
[email protected]
I.R.Iran P.O.Box15875-5643
Enquiry & Orders:
Tel: +98 26 36630010 Tel: +98 21 22908581-3
[email protected]
Fax: +98 26 36612734 Fax: +98 21 22908654

GR119-1

You might also like