Dimensions

Unit (mm)

Working Ranges Standard Equipment

ISO standard cabin Door and cab locks, one key
·Cabin ROPS(ISO 3471) AM/FM radio and cassette
FOPS(ISO 3449) Two outside rear view mirrors
TOPS(ISO 12117) Fully adjustable suspension seat with seat belt
·All-weather steel cab with all-around Console box tilting system(LH.)
visibility Four front working lights
·Safety glass windows Electric horn
·Sliding fold-in front window Battery (1 x 12 V x 100 AH)
·Sliding side window Battery master switch
·Lockable door 12 volt power supply(DC-DC converter)
·Accessory box & Ash-tray Removable clean out screen for radiator
Heater & Defroster Automatic swing brake
Centralized monitoring Removable reservoir tank
·Engine speed Water separator, fuel line
·Gauges Counterweight (210 kg, 460 lb)
Fuel level gauge Mono boom (3.0 m, 9’10”)
Engine coolant temperature gauge Arm (1.6 m, 5’ 3”)
·Warning Track shoes (400 mm, 15.7”)
Fuel level Track rail guard
Boom length 3,000 mm(9' 10") Engine oil pressure
Engine coolant temperature
Arm length ※1,600 mm(5' 3") 1,900 mm(6' 3")
Hyd. oil temperature
A Max. digging reach 6,150 mm(20' 2") 6,400 mm(21' 0") Low battery
A' Max. digging reach Air cleaner closing
6,010 mm(19' 9") 6,270 mm(20' 7")
at ground ·Fuel prefilter
Some of the Photo may include optional equipment.
B Max. digging depth 3,820 mm(12' 6") 4,060 mm(13' 4")
B' Max. digging depth
Optional Equipment
3,420 mm(11' 3") 3,700 mm(12' 2")
(8ft level) Air-conditioner(4000 kcal/hr, 16000BTU/hr) Quick coupler
Fuel filler pump(35ℓ/min, 9.2 US gpm) Rubber crawler (400mm, 16”)
C Max. vertical wall
3,200 mm(10' 6") 3,460 mm(11' 4") Beacon lamp Narrow bucket(0.07m3, 0.09yd3)
digging depth Piping kit ( breaker, etc) Arm (1.9m) MINI CRAWLER EXCAVATOR Applied Tier 3 Engine
D Max. digging height 5,780 mm(18' 12") 5,920 mm(19' 5") Double acting piping kit(clamshell, etc) Tool kit
E Max. dumping height 4,050 mm(13' 3") 4,180 mm(13' 9") Accumulator, work equipment lowering Operator suit

55-7A
Electric transducer Mechanical suspension seat with heater
F Min. front radius 2,350 mm( 7' 9") 2,360 mm( 7' 9")
Travel alarm

Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.
All US measurement are rounded off to nearest pound or inche.

PLEASE CONTACT

www.hyundai-ce.com 2008. 03 Rev 0.

Robex 55-7A

Hyundai Robex 55-7A

Maximized Workability
Comfortable Operating Environment
Advanced Hydraulic System
Enhanced Durability & Reliability
Improved Fuel Efficiency

The Highest Engine Power in its Class

YANMAR 4TNV98-EPHYB
57 HP / 2,400 rpm
Yanmar 4TNV98-EPHYB engine provides 20.5 kgf.m (148 lbf.ft) of
maximum torque with 57 HP at 2,400rpm of rated power.
This means the R55-7A runs with the most power in its class,
giving you more power to get the job done.

Some of the Photo may include optional equipment.

HYUNDAI CONSTRUCTION EQUIPMENT 02 / 03

Robex 55-7A

Technology in Cab Design

Wide Comfortable Operating Space
All the controls are designed and positioned according to the latest ergonomic research.
Reinforced pillars have also been added for greater cab rigidity.

Reliable Instrument Panel

All information from the devices such as engine RPM,
engine water temp., fuel status and the state of all types
of electric switches provide the operator with an exact
condition of machine.
These features make troubleshooting much easier.
M MODE : High power

Reliable Instrument Panel

Radio & Cassette Player

Deluxe radio & cassette player are
located at convenient position.

Dial Type Engine Speed Switch and

Key Switch
Some of the Photo may include optional equipment.

755mm

Wide Cab with Excellent Visibility High-output Air Conditioner & Heater Sensitive Joystick and Easy Entrance Smooth Travel Pedals and Foot Rests Sliding Side Window Big Sized Sun Visor & Top Glass Rise-up Wiper Easy to Open Front Window
The cab is roomy and ergonomically Large capacity air conditioning system is New joystick grips for precise control have Travel pedals and levers are equipped with The sliding side window provides more The big sun visor and top glass are installed Rise-up wiper gives better front view to Sliding fold-in front window is easily opened
designed with low noise level and good installed for operator’s comfort in all climate. been equipped with 4 switches. ergonomically designed foot rests. It convenience for the operator without having on the top of the front window to block direct operator. and safely maintained in open position to
visibility. For more convenience, the cab is equipped Tilting tower combined with large door enables the operator to work easily and to opening the door. sunlight and increase operator’s visibility. improve the working condition.
A full view front window and large rear and with defroster for the cold seasons. provides more space for gateway. quickly. Top Glass : Bronze color and laminated glass
side windows provide excellent visibility in
Left Horn/Dummy
all directions.
Right Breaker/Dummy

HYUNDAI CONSTRUCTION EQUIPMENT 04 / 05

Robex 55-7A

Unparalleled Technology of R55-7A.

It will fulfill your dreams

Strong and Stable Lower Frame

Reinforced box-section frame
is all welded with low-stress
and high-strength steel.

Some of the Photo may include optional equipment.

HYUNDAI CONSTRUCTION EQUIPMENT 06 / 07

Robex 55-7A

Powerful and Dynamic Work

Some of the Photo may include optional equipment.

Exceptional Traction &Lifting Capacity Reinforced Bucket Reinforced Arm Gradeability Anti Restart System Easy-to-Reach Control Panels Installation for Breaker Operation Offset Boom Swing
The considerable traction and lifting The design includes bucket link durability Reinforcements are welded to protect the 35 degree(70%) of high gradeability and long The new system protects the starter from re- Switches and other essential controls are Overload relief value and pipes are installed The R55-7A is designed for efficient work in
capacity enable all work to be done quickly. and anti-wear characteristics with arm from impacts and wear. tumbler distance may be easier to work at starting during engine operation, even if the located near the operator. as standard for customer’s convenience. congested residential and urban areas. The
additional reinforcement plates on cutting slope area. operator accidentally turns the start key This helps keep operator move-ment to a boom can be offset within a range of 130
edge section. Reinforced bucket is made again. minimum, enhancing control with less degrees.
with thicker steel and additional lateral plate. operator fatigue.

HYUNDAI CONSTRUCTION EQUIPMENT 08 / 09

Robex 55-7A

Performance and Durability

Some of the Photo may include optional equipment.

Arrangement Between Bucket and Powerful Dozer Blade FEM(Finite Element Method) Tough, Durable Undercarriage Steel Tube Frame Cabin Boom Cylinder Cover Applied Side Protector Large Capacity Radiator
Blade Large size blade improves work efficiency Durability of structure is proven through The R55-7A has an undercarriage Strong cabin structure protects the operator Boom cylinder cover is installed as standard When the machine turns, the side protector To improve the performance in oveload or
Attachment is designed to minimize dead and equipment durability . FEM(Finite Element Method) analysis and constructed with tough, durable, robotically- against falling objects, improves operator’s to prevent cylinder damage. prevents any damage to engine hood. continual work, large capacity radiator was
space between bucket and blade for long term durability test. welded steel. Tapered, upper roller side safety with seat-belt in the event of roll-over. installed.
efficient grading work. supports were installed to keep tracks (ROPS, FOPS, TOPS STD.)
properly aligned at all times.

HYUNDAI CONSTRUCTION EQUIPMENT 10 / 11

Robex 55-7A

Reliability and Serviceability

Full open doors and master key system
provide easy access for servicing.

Easy to Maintain Engine Components

The R55-7A is designed with accessibility in mind. All doors,
covers and hoods are built for complete open access. You’ll find
that the R55-7A offers plenty of space to complete your regular
maintenance and service hassle-free.

Long Life Hydraulic Filter

Uses high-performance filtering
materials are applied for extending the
filter replacement interval.

Some of the Photo may include optional equipment.

Easy Change of Air Cleaner Easy to Fill up with Fuel (Option) High Capacity Prefilter & Fuel Filter Centralized Grease Fittings Centralized Fuse Box Large Capacity Fuel Tank Battery Master Switch Smooth and precise swing control
The R55-7A is fitted with durable plastic air The Fuel filler pump provide easy filling of To protect the injection system and minimize Grease fittings are highlighted and Fuse box is arranged on the rear of seat for The large capacity of fuel tank provides The battery master switch enables checking Shock absorbing design is more improved to
cleaner for easy maintenance and quick fuel tank from other tanks by electric device. the risk of fuel breakdown, high capacity fuel centralized for fast access when doing your easy service. longer working time. and maintaining the battery while minimizing stop and start swing precisely and smoothly.
service. filter and prefilter are applied for durability. service checks. Save time and money during the discharge of battery.
routine maintenance.

HYUNDAI CONSTRUCTION EQUIPMENT 12 / 13

Specifications

Engine Swing System Buckets

Model YANMAR 4TNV98-EPHYB Swing motor Axial piston motor Capacity Width 3.0m (9' 10") Boom
Water cooled, 4 cycle diesel Swing reduction Planetary gear reduction SAE CECE Without With Weight
1.6m (5'3") arm
Type 4 cylinders in line, direct Swing brake Multi wet disc heaped heaped side cutters side cutters
injection, low emission Swing speed 9.3 rpm 0.07 m3 (0.09 yd3) 0.06 m3 (0.08 yd3) 315 mm(12.4") 360 mm(14.2") 84 kg(185 lb)
Rated flywheel horse power * 0.18 m (0.24 yd )
3 3
0.15 m3 (0.20 yd3) 670 mm(26.3") 735 mm(29.0") 137 kg(300 lb)
J1995 (gross) 57 HP (42.5 kW) at 2,400 rpm : Applicable for materials with density 1,600 kg/m3 (2,700 lb/yd3) or less ▲ : Applicable for materials with density 1,100 kg/m3 (1,850 lb/yd3) or less
SAE * : Standard digging bucket
J1349 (net) 55.2 HP (41.2 kW) at 2,400 rpm
Controls
6271/1 (gross) 57.8 PS (42.5 kW) at 2,400 rpm Length
DIN Arm * 1,600 mm (5' 3") 1,900 mm (6' 3")
6271/1 (net) 56 PS (41.2 kW) at 2,400 rpm Pilot pressure-operated joysticks and pedals provide almost effortless and Weight 210 kg (460 lb) 230 kg (510 lb)
Max. torque 20.5 kgf.m (148 lbf.ft) at 1,550 rpm fatigueless operation. 37.7 kN 37.7 kN
SAE 3,850 kgf 3,850 kgf
Bore x stroke 98 mm (38.6") x 110 mm (4.33") 8,490 lbf 8,490 lbf
Two joysticks with one safety lever Bucket digging
Displacement 3,319 cc (203 cu in) Pilot control (LH): Boom Swing and arm, force 42.4 kN 42.4 kN
Battery 1 x 12 V x 100 AH ISO 4,330 kgf 4,330 kgf
(RH): Boom and bucket(ISO)
9,550 lbf 9,550 lbf
Starter motor 12V-3.0 kW Traveling and steering Two levers with pedals 28.4 kN 25.5 kN
Alternator 12V-80 A External Lights Two lights mounted on the boom one below the cab SAE 2,900 kgf 2,600 kgf
Arm crowd 6,390 lbf 5,730 lbf SAE heaped 0.07 m3 (0.09 yd3) * 0.18 m (0.24 yd )
3 3

force 31.9 kN 28.7 kN

ISO 3,260 kgf 2,930 kgf
Hydraulic System 7,190 lbf 6,460 lbf
Coolant & Lubricant Capacity
Main pump
Type Two variable displacement piston pumps (Refilling) liter US gal UK gal Rating over-front Rating over-side or 360 degree
Lifting Capacities R55-7A
Rated flow 2 x 55.2ℓ/min(14.5 US gpm/12 UK gpm)pumps Fuel tank 120.0 31.7 26.4
Sub-pump for pilot circuit Gear pump Engine coolant 10.0 2.6 2.2 ·Boom : 3.0m (9’ 10”) ·Arm : 1.9 m (6’ 3”) ·Bucket : 0.18m3 (0.24yd3) SAE heaped ·Dozer blade down with 200kg (440 lb) counterweight.

Hydraulic motors Engine oil 11.6 3.1 2.6 Load radius At max. reach
Load point 2.0m(5ft) 3.0m(10ft) 4.0m(13.12ft) 5.0m(16.40ft) Capacity Reach
Two speed axial piston motor with counter Swing device-gear oil 1.5 0.4 0.3 height
Travel Final drive(each) 1.2 0.3 0.2 m(ft) m
balance valve and parking brake (ft)
Swing Axial piston motor with automatic brake Hydraulic tank 70.0 18.5 15.4 5.0m kg *950 *950 4.12
Hydraulic system 120.0 31.7 26.4 (16.40ft) lb *2090 *2090 (13.5)
Relief valve setting
4.0m kg *1020 *1020 *980 730 5.07
Implement circuits 220 kgf/cm2 (3,130 psi) (13.12ft) lb *2250 *2250 *2160 1610 (16.6)
Travel circuit 220 kgf/cm2 (3,130 psi) 3.0m kg *1090 1070 880 600 5.59
(10ft) lb *2400 2360 1940 1320 (18.3)
Swing circuit 220 kgf/cm2 (3,060 psi) Undercarriage 2.0m kg *3060 *3060 *1690 1610 *1330 1020 1030 710 810 550 5.83
Pilot circuit 30 kgf/cm2 ( 430 psi) (5ft) lb *6750 *6750 *3730 3550 *2930 2250 2270 1570 1790 1210 (19.1)
1.0m kg 2230 1490 1420 970 1000 680 790 540 5.84
Service valve Installed X-leg type center frame is integrally welded with reinforced box-section track (5ft) lb 4920 3280 3130 2140 2200 1500 1740 1190 (19.2)
Hydraulic cylinders frames. The undercarriage includes lubricate rollers, track adjusters with shock Ground kg *2340 *2340 2160 1430 1380 930 990 670 840 560 5.62
absorbing springs and sprockets, and track chain with triple grouser shoes. Line lb *5160 *5160 4760 3150 3040 2050 2180 1480 1850 1230 (18.4)
Boom : 1 - 110 x 65 x 715 mm (4.3" x 2.6" x 28.1") -1.0m kg *3600 2760 2140 1410 1360 920 960 650 5.13
Arm : 1 - 90 x 55 x 850 mm (3.5" x 2.2" x 33.5") Center frame X - leg type (-5ft) lb *7940 6080 4720 3110 3000 2030 2120 1430 (16.8)
No. of cylinder- -2.0m kg *3780 2800 2160 1430 *1150 900 4.22
Bucket : 1 - 80 x 50 x 660 mm (3.1" x 2.0" x 26.0") Track frame Pentagonal box type
bore x rod x stroke (-5ft) lb *8330 6170 4760 3150 *2540 1980 (13.8)
Boom swing : 1 - 95 x 50 x 527 mm (3.7" x 2.0" x 20.7") No. of shoes on each side 40 -3.0m kg *2060 *2060
(-10ft) lb *4540 *4540
Dozer blade : 1 - 110 x 60 x 214 mm (4.3" x 2.4" x 8.4") No. of carrier roller on each side 1
No. of track roller on each side 5 ·Boom : 3.0m (9’ 10”) ·Arm : 1.9 m (6’ 3”) ·Bucket : 0.18m3 (0.24yd3) SAE heaped ·Dozer blade down with 200kg (440 lb) counterweight.
Load radius At max. reach
Drives & Brakes Load point 2.0m(5ft) 3.0m(10ft) 4.0m(13.12ft) 5.0m(16.40ft) Capacity Reach
height
m(ft) m
Drive method Full hydrostatic type Operating Weight (approximate) (ft)
Drive motor Axial piston motor, in-shoe design 5.0m kg *870 *870 4.56
(16.40ft) lb *1920 *1920 (15.0)
Reduction system Planetary reduction gear Operating weight, including 3,000 mm (9' 10") boom, 1,600 mm (5'3") arm, SAE
4.0m kg *900 650 5.89
heaped 0.18 m3 (0.24 yd3) digging bucket, lubricant, coolant, full fuel tank, (13.12ft) lb *1980 1430 (19.3)
Max. drawbar pull 5,300 kgf (11,700 lbf)
hydraulic tank and the standard equipment. 3.0m kg *950 *950 *1000 730 810 550 6.12
Max. travel speed(high) / (low) 4.1 km/hr (2.5 mph) / 2.2 km/hr (1.4 mph) (10ft) lb *2090 *2090 *2200 1610 1790 1210 (20.1)
Gradeability 35。 (70%) Major component weight 2.0m kg *1450 *1450 *1200 1030 1030 710 750 500 6.13
(5ft) lb *3200 *3200 *2650 2270 2270 1570 1650 1100 (20.1)
Parking brake Multi-wet disc Upper structure 2,650 kg ( 5,840 lb)
1.0m kg *2090 *2090 *2170 1510 1430 980 1000 680 730 490 5.92
Counterweight 200 kg ( 440 lb) (5ft) lb *4610 *4610 *4780 3330 3150 2160 2200 1500 1610 1080 (19.4)
Mono boom(with arm cylinder) 310 kg ( 680 lb) Ground kg *2320 *2320 2160 1430 1380 930 980 660 770 510 5.46
Line lb *5110 *5110 4760 3150 3040 2050 2160 1460 1700 1120 (17.9)
-1.0m kg *3260 2720 2120 1400 1350 910 970 650 860 580 4.65
Operating Weight (-5ft) lb *7190 6000 4670 3090 2980 2010 2140 1430 1900 1280 (15.3)
Operating weight kg(lb) 5,700 (12,570) -2.0m kg *4150 2760 2130 1400 1360 910 1120 760
(-5ft) lb *9150 6080 4700 3090 3000 2010 2470 1680
·Mono boom with blade -3.0m kg *2770 *2770 *1650 1460
(-10ft) lb *6110 *6110 *3640 3220

NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567. 3. The load point is a hook (standard equipment) located on the back of the bucket.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load 4. (*) indicates load limited by hydraulic capacity.
with the machine on firm, level ground or 87% of full hydraulic capacity.

HYUNDAI CONSTRUCTION EQUIPMENT 14 / 15