Before purchasing, please read these instructions thoroughly.

Food Service Uniforms Mock-Up

4 .pSD files

Sanchi477

Photoshop requirements
Open the .PSD files in one of the listed programs: Mock-up files require Photoshops 3D functionality.
Make sure your Photoshop meets all system
• Adobe Photoshop CS5 Extended
• Adobe Photoshop CS6 Extended requirements and has a functioning 3D feature.
• Adobe Photoshop CC .....

File resolution is 2500×2500 px at 72ppi, color mode is in RGB.

Good practice: save a copy of the downloaded file to a safe location on your computer.
Help File

In the downloaded file you will find:

• set1.psd

• set2.psd

• set3.psd

• set4.psd
 Help File

Add Texture to the Uniform

In this mock-up we take advantage of Photoshops

3D capability to fully wrap a texture around the 3D
model of a Workplace Uniform and then render
(convert 3D model to a 2D image) for final output.

Open any downloaded file.

In the LAYERS panel locate () layer Uniform.

Since this is a 3D layer, containing a 3D model,
textures are applied to it. All together there 
are 8 textures. To edit the texture (of the cap,
visor, polo shirt, t-shirt, long sleeve shirt, short
sleeve shirt, trousers and apron) double click ()
Texture < Diffuse < cap, visor, polo shirt, t-shirt,
long sleeve shirt, short sleeve shirt, trousers,
apron. 

CONTINUE ON THE NEXT PAGE

Help File

Add Texture to the Uniform

Baseball Cap Texture

A new file will open in a separate window.

File represents the texture template of the cap.
Paste () your design into the group with the 
mask. (The mask serves as a template and in the
PATHS panel () there is a pre saved path which
marks the outline of the mask.)

Note (Photoshop CC users): Use the downloaded template

(cap.psd) to place your designs, then drag and drop the file 
into the now opened canvas.

After you are done, save (ctrl+s) the file

and !close it.
If you look now in the downloaded file, the
texture should be applied.

- Panels
- Button
- Bill

FRONT


Help File

Add Texture to the Uniform

Visor Texture

A new file will open in a separate window.

File represents the texture template of the visor.
Paste () your design into the group with the

mask. (The mask serves as a template and in the
PATHS panel () there is a pre saved path which
marks the outline of the mask.)

Note (Photoshop CC users): Use the downloaded template

(visor.psd) to place your designs, then drag and drop the file 
into the now opened canvas.

After you are done, save (ctrl+s) the file

and !close it.
If you look now in the downloaded file, the
texture should be applied.

- Back Straps
- Panel
- Bill


FRONT



Help File

Add Texture to the Uniform

Polo Shirt Texture

A new file will open in a separate window.

File represents the texture template of the polo
shirt.

Paste () your design into the group with the
mask. (The mask serves as a template and in the
PATHS panel () there is a pre saved path which
marks the outline of the mask.)

Note (Photoshop CC users): Use the downloaded template 

(polo shirt.psd) to place your designs, then drag and drop
the file into the now opened canvas.

After you are done, save (ctrl+s) the file

and !close it.
If you look now in the downloaded file, the
texture should be applied.


- Right Sleeve
- Left Sleeve 
- Front
- Button Placket
- Back
- Collar 




Help File

Add Texture to the Uniform

T-Shirt Texture

A new file will open in a separate window.

File represents the texture template of the t-shirt.
Paste () your design into the group with the 
mask. (The mask serves as a template and in the
PATHS panel () there is a pre saved path which
marks the outline of the mask.)

Note (Photoshop CC users): Use the downloaded template

(t-shirt.psd) to place your designs, then drag and drop the
file into the now opened canvas. 

After you are done, save (ctrl+s) the file

and !close it.
If you look now in the downloaded file, the
texture should be applied.

- Right Sleeve
- Left Sleeve

- Front
- Back 
- Neck Band
 


Help File

Add Texture to the Uniform

Long Sleeve Shirt Texture

A new file will open in a separate window.

File represents the texture template of the long
sleeve shirt. 
Paste () your design into the group with the
mask. (The mask serves as a template and in the
PATHS panel () there is a pre saved path which
marks the outline of the mask.)

Note (Photoshop CC users): Use the downloaded template 

(long sleeve shirt.psd) to place your designs, then drag and
drop the file into the now opened canvas.

After you are done, save (ctrl+s) the file

and !close it.
If you look now in the downloaded file, the
texture should be applied.

- Right Sleeve 
- Left Sleeve
- Cuff
- Front
- Back
- Collar  


Help File

Add Texture to the Uniform

Short Sleeve Shirt Texture

A new file will open in a separate window.

File represents the texture template of the short
sleeve shirt. 
Paste () your design into the group with the
mask. (The mask serves as a template and in the
PATHS panel () there is a pre saved path which
marks the outline of the mask.)

Note (Photoshop CC users): Use the downloaded template 

(short sleeve shirt.psd) to place your designs, then drag and
drop the file into the now opened canvas.

After you are done, save (ctrl+s) the file

and !close it.
If you look now in the downloaded file, the
texture should be applied.

- Right Sleeve 
- Left Sleeve
- Front
- Back
- Collar  


Help File

Add Texture to the Uniform

Trousers Texture

A new file will open in a separate window.

File represents the texture template of the 
trousers.
Paste () your design into the group with the
mask. (The mask serves as a template and in the
PATHS panel () there is a pre saved path which
marks the outline of the mask.)

Note (Photoshop CC users): Use the downloaded template
(trousers..psd) to place your designs, then drag and drop the
file into the now opened canvas.

After you are done, save (ctrl+s) the file

and !close it.
If you look now in the downloaded file, the
texture should be applied.

 
- Right Pant Leg
- Left Pant Leg 
- Pockets
- Fly
- Waistband
- Belt Loops 


 
Help File

Add Texture to the Uniform

Apon Texture

A new file will open in a separate window.

File represents the texture template of the apron. 
Paste () your design into the group with the
mask. (The mask serves as a template and in the
PATHS panel () there is a pre saved path which
marks the outline of the mask.)

Note (Photoshop CC users): Use the downloaded template 

(apron shirt.psd) to place your designs, then drag and drop
the file into the now opened canvas.

After you are done, save (ctrl+s) the file

and !close it.
If you look now in the downloaded file, the
texture should be applied.

- Apron strings
- Pocket



Help File

Render a 3D File for Final Output

3D rendering is the 3D computer graphics process

of converting 3D models into 2D images to
produce the highest quality version for output.

After you’ve finished applying textures to the 3D

model, next step is creating the final render.

In the LAYER panel locate layer Uniform. Double

click () the thumbnail to open the 3D (SCENE)
panel.

At the top of the 3D panel, click () the
Scene button, and then click () the Scene entry
in the list below.

From the () Quality menu in the lower half of

the panel, select () Ray Traced Final.
A final render can be time-consuming, if you 
need to stop the render process just click on the 
image.

Note: If you need to work on the texture, return

Quality setting to default Interactive (Painting).

After the render is complete, you can flatten the

3D scene for output.

Note (Photoshop CC users): This step doesn’t apply.


Help File

Add your own Background Color

In opened psd file locate Background layer with a

disabled layer mask applied.
Click () on the mask to enable it. 
Then select the layer Fill With Color and fill the
canvas with your favorite color.


Add Gloss Effect (with darker Colors)

All the files have a “gloss effect” applied which

you can control by locating the layer named Gloss
() at the top of the layers panel. Change the
strength of gloss, by changing the opacity of the
layer.

Help File

Thank you for the purchase!

Sanchi477