SC 200

Exam SC-200
Microsoft Security Operations

Analyst – Skills Measured
Address
Level 1, 42 Murray Street, Hobart,
Tasmania 7000 Australia
Phone Email
03 6234 3883 [email protected]
Web
www.quill.com.au
PAGE 2 Exam SC-200 Microsoft Security Operations Analyst – Skills Measured
Audience Profile
The Microsoft security operations analyst collaborates with organizational stakeholders to
secure information technology systems for the organization. Their goal is to reduce
organizational risk by rapidly remediating active attacks in the environment, advising on
improvements to threat protection practices, and referring violations of organizational policies
to appropriate stakeholders.
Responsibilities include threat management, monitoring, and response by using a variety of

security solutions across their environment. The role primarily investigates, responds to, and
hunts for threats using Microsoft Sentinel, Microsoft Defender for Cloud, Microsoft 365
Defender, and third-party security products. Since the security operations analyst consumes
the operational output of these tools, they are also a critical stakeholder in the configuration
and deployment of these technologies.
You may be eligible for ACE college credit if you pass this certification exam. See ACE college
credit for certification exams for details.
Contents
Audience Profile ……………………………………………………………………………………………………………. 2
How to use this guide ……………………………………………………………………………………………………. 5
In the exam …………………………………………………………………………………………………………………… 5
Key Learning Objectives ………………………………………………………………………………………………… 6
Mitigate threats using Microsoft 365 Defender (25-30%) ……………………………………….. 7
Detect, investigate, respond, and remediate threats to the
productivity environment by using Microsoft Defender for Office 365 ……………….. 7
Detect, investigate, respond, and remediate endpoint
threats by using Microsoft Defender for Endpoint ………………………………………………. 14
Detect, investigate, respond, and remediate identity threats …………………………….. 23
Detect, investigate, respond, and remediate application threats ………………………...27
Manage cross-domain investigations in Microsoft 365 Defender portal ……………… 30
Mitigate threats using Microsoft Defender for Cloud (25-30%) ……………………………… 32
Design and configure a Microsoft Defender for Cloud implementation ………………. 32
Plan and implement the use of data connectors for ingestion of
data sources in Microsoft Defender for Cloud ……………………………………………………. 35
Manage Microsoft Defender for Cloud alert rules ……………………………………………… 39
Configure automation and remediation ……………………………………………………………. 40
Investigate Microsoft Defender for Cloud alerts and incidents ………………………….. 42

Contents
Mitigate threats using Microsoft Sentinel (40-45%)
Design and configure a Microsoft Sentinel workspace ……………………………………….. 47
Plan and Implement the use of data connectors for ingestion of
data sources in Microsoft Sentinel ……………………………………………………………………. 52
Manage Microsoft Sentinel analytics rules ………………………………………………………… 60
Configure Security Orchestration Automation and Response
SOAR) in Microsoft Sentinel ……………………………………………………………………………… 64
Manage Microsoft Sentinel Incidents ………………………………………………………………… 69
Use Microsoft Sentinel workbooks to analyze and interpret data ………………………. 75
Hunt for threats using Microsoft Sentinel ………………………………………………………….. 78

How to use this guide

This guide is here to help you prepare and take the exam. It is designed to complement your
existing learning and to help guide you in the areas of focus for the exam. You should use this
as a framework to help fill in the blanks on information that you have.
We have developed the following content in direct alignment to the current Learning objec-
tives. These can be viewed directly, by selecting the “Download exam skills outline” from the
exam page at: https://docs.microsoft.com/en-us/learn/certifications/exams/sc-200
There are loads of exciting and interesting topics we can begin to follow on from these core
objectives, but remember for the exam we do need to stay focused and constrain ourselves to
these key topics.
In the exam
The exam itself is quite straight forward with no complicated case studies or longwinded
questions. The majority of the questions will be “Multiple Choice” or “Choose all that apply”
type of questions. You may also come across some “Drag and Drop” questions where you
need to place answers in order. The key thing to note is that all of the questions will have the
answer in front of you.
Remembering that all of the answers are presented to you, you need to make sure that you
answer each question. There is no loss of marks for incorrect answers, so even if you don’t
know the answer, you should attempt it.
The exam itself will have between 40 and 50 questions, depending on the pool of questions
that have been allocated. You will have 60 minutes to complete the exam. As you can see you
will need to move at a steady pace throughout. Don’t get too stuck on any question, instead
select your answer and then mark the question for “Review”. Then if you have time at the end
of the exam you can go back and review these questions.
Key Learning Objectives

Mitigate threats using Microsoft 365 Defender (25-30%)
Analyze threat data across domains and rapidly remediate threats with built-in orchestration and
automation in Microsoft 365 Defender. This learning path aligns with exam SC-200: Microsoft Se-
curity Operations Analyst.
You can access the Microsoft Learn materials online content here:
https://docs.microsoft.com/en-us/learn/paths/sc-200-mitigate-threats-
using-microsoft-365-defender/
Detect, investigate, respond, and remediate threats to the productivity

environment by using Microsoft Defender for Office 365
Detect, investigate, respond, and remediate threats to Microsoft Teams, SharePoint, and
OneDrive
Remediation actions
Threat protection features in Microsoft Defender for Office 365 include certain remediation
actions. Such remediation actions can include:
• Soft delete email messages or clusters

• Block URL (time-of-click)
• Turn off external mail forwarding
• Turn off delegation
Threats and remediation actions
Microsoft Defender for Office 365 includes remediation actions to address various threats.
Automated investigations often result in one or more remediation actions to review and
approve. In some cases, an automated investigation does not result in a specific remediation
action. To further investigate and take appropriate actions, use the guidance in the following
table.
Category Threat/risk Remediation action(s)
Email Malware Soft delete email/cluster

If more than a handful of email messages
in a cluster contain malware, the cluster
Email Malicious URL Soft delete email/cluster

(A malicious URL was detected Block URL (time-of-click verification)
by Safe Links.)
Email that contains a malicious URL is
considered to be malicious.
Email Phish Soft delete email/cluster
If more than a handful of email messages
in a cluster contain phishing attempts,
the whole cluster is considered a phishing
Email Zapped phish Soft delete email/cluster

(Email messages were
delivered and Reports are available to view zapped messag-
then zapped.) es.
Email Missed phish Automated investigation triggered by the user's
email reported by a user report
Email Volume anomaly Automated investigation does not result in a

(Recent email quantities specific pending action.
exceed the previous 7-10 Volume anomaly is not a clear threat, but is
days for matching crite- merely an indication of larger email volumes in
ria.) recent days compared to the last 7-10 days.
Although a high volume of email can indicate

potential issues, confirmation is needed in
terms of either malicious verdicts or a manual
review of email messages/clusters.
Email No threats found Automated investigation does not result in a

(The system did not find specific pending action.
any threats based on Threats found and zapped after an investiga-
files, URLs, or analysis of tion is complete are not reflected in an investi-
email cluster verdicts.) gation's numerical findings, but such threats
are viewable in Threat Explorer.
User A user clicked a mali- Automated investigation does not result in a

cious URL specific pending action.
(A user navigated to a
page that was later Block URL (time-of-click)
found to be malicious, or Use Threat Explorer to view data about URLs
a user bypassed a Safe and click verdicts.
Links warning page to
get to a malicious page.) If your organization is using Microsoft Defender
for Endpoint, consider investigating the user to
User A user is sending mal- Automated investigation does not result in a

ware/phish specific pending action.
The user might be reporting malware/phish,

or someone could be spoofing the user as
part of an attack. Use Threat Explorer to view
and handle email contain-
ing malware or phish.
User Email forwarding Remove forwarding rule

(Mailbox forwarding rules
are configured, chch Use mail flow insights, including
could be used for data the Autofowarded messages report, to view
exfiltration.) more specific details about forwarded email.
https://docs.microsoft.com/en-us/microsoft-365/security/office-365-security/air-
remediation-actions?view=o365-worldwide
Safe Attachments in Microsoft Defender for Office 365
Safe Attachments in Microsoft Defender for Office 365 provides an additional layer of protec-
tion for email attachments that have already been scanned by anti-malware protection in Ex-
change Online Protection (EOP). Specifically, Safe Attachments uses a virtual environment to
check attachments in email messages before they're delivered to recipients (a process known
as detonation).
Safe Attachments protection for email messages is controlled by Safe Attachments policies.
Although there's no default Safe Attachments policy, the Built-in protection preset security
policy provides Safe Attachments protection to all recipients (users who aren't defined in cus-
tom Safe Attachments policies). For more information, see Preset security policies in EOP and
Microsoft Defender for Office 365. You can also create Safe Attachments policies that apply to
specific users, group, or domains. For instructions, see Set up Safe Attachments policies in Mi-
crosoft Defender for Office 365.
https://docs.microsoft.com/en-us/microsoft-365/security/office-365-security/safe-
attachments?view=o365-worldwide
Detect, investigate, respond, remediate threats to email by using Defender for

Office 365
Microsoft Defender for Office 365 includes powerful automated investigation and response
(AIR) capabilities that can save your security operations team time and effort. As alerts are
triggered, it's up to your security operations team to review, prioritize, and respond to those
alerts. Keeping up with the volume of incoming alerts can be overwhelming. Automating some
of those tasks can help.
AIR enables your security operations team to operate more efficiently and effectively. AIR
capabilities include automated investigation processes in response to well-known threats that
exist today. Appropriate remediation actions await approval, enabling your security operations
team to respond effectively to detected threats. With AIR, your security operations team can
focus on higher-priority tasks without losing sight of important alerts that are triggered.
https://docs.microsoft.com/en-us/microsoft-365/security/office-365-security/office-365-air?
view=o365-worldwide
Manage data loss prevention policy alerts
Data loss prevention (DLP) policies can take protective actions to prevent unintentional
sharing of sensitive items. When an action is taken on a sensitive item, you can be notified by
configuring alerts for DLP. This article shows you how to define rich alert policies that are
linked to your data loss prevention (DLP) policies. You'll see how to use the DLP alert
management dashboard in the Microsoft 365 compliance center to view alerts, events, and
associated metadata for DLP policy violations.
Licensing for alert configuration options
Single-event alert configuration: Organizations that have an E1, F1, or G1 subscription or an

E3 or G3 subscription can create alert policies only where an alert is triggered every time an
activity occurs.
Aggregated alert configuration: To configure aggregate alert policies based on a threshold,

you must one of these licensing configurations:
• An E5 or G5 subscription
• An E1, F1, or G1 subscription or an E3 or G3 subscription that includes one of the following
features:
• Office 365 Advanced Threat Protection Plan 2
• Microsoft 365 E5 Compliance
• Microsoft 365 eDiscovery and Audit add-on license
Roles
If you want to view the DLP alert management dashboard or to edit the alert configuration
options in a DLP policy, you must be a member of one of these role groups:
• Compliance Administrator
• Compliance Data Administrator
• Security Administrator
• Security Operator
• Security Reader
https://docs.microsoft.com/en-us/microsoft-365/compliance/dlp-alerts-dashboard-
get-started?view=o365-worldwide?WT.mc_id=ES-MVP-4039827
Assess and recommend sensitivity labels
Sensitivity labels from the Microsoft Information Protection solution let you classify and
protect your organization's data, while making sure that user productivity and their ability to
collaborate isn't hindered.
When you're ready to start protecting your organization's data by using sensitivity labels:
1. Create the labels. Create and name your sensitivity labels according to your organization's
classification taxonomy for different sensitivity levels of content. Use common names or terms
that make sense to your users. If you don't already have an established taxonomy, consider
starting with label names such as Personal, Public, General, Confidential, and Highly
Confidential. You can then use sublabels to group similar labels by category. When you create
a label, use the tooltip text to help users select the appropriate label.
For more extensive guidance for defining a classification taxonomy, download the white
paper,
2. Define what each label can do. Configure the protection settings you want associated with
each label. For example, you might want lower sensitivity content (such as a "General" label)
to have just a header or footer applied, while higher sensitivity content (such as a
"Confidential" label) should have a watermark and encryption.
3. Publish the labels. After your sensitivity labels are configured, publish them by using a label
policy. Decide which users and groups should have the labels and what policy settings to use.
A single label is reusable—you define it once, and then you can include it in several label
policies assigned to different users. So for example, you could pilot your sensitivity labels by
assigning a label policy to just a few users. Then when you're ready to roll out the labels across
your organization, you can create a new label policy for your labels and this time, specify all
users.
The basic flow for deploying and applying sensitivity labels:
https://docs.microsoft.com/en-us/microsoft-365/compliance/get-started-with-sensitivity-
labels?view=o365-worldwide
Assess and recommend insider risk policies

Insider risk management is a compliance solution in Microsoft 365 that helps minimize internal
risks by enabling you to detect, investigate, and act on malicious and inadvertent activities in
your organization. Insider risk policies allow you to define the types of risks to identify and
detect in your organization, including acting on cases and escalating cases to Microsoft
Advanced eDiscovery if needed. Risk analysts in your organization can quickly take appropriate
actions to make sure users are compliant with your organization's compliance standards.
Understand requirements and dependencies

Policy template requirements: Depending on the policy template you choose, there are re-
quirements that you need to understand and plan for prior to configuring insider risk manage-
ment in your organization:
• When using the Data theft by departing users template, you must configure a Microsoft
365 HR connector to periodically import resignation and termination date information for
users in your organization. See the Import data with the HR connector article for step-by-
step guidance to configure the Microsoft 365 HR connector for your organization.
• When using Data leaks templates, you must configure at least one Data Loss Prevention
(DLP) policy to define sensitive information in your organization and to receive insider risk
alerts for High Severity DLP policy alerts. See the Create, test, and tune a DLP policy article
for step-by-step guidance to configure DLP policies for your organization.
• When using Security policy violation templates, you must enable Microsoft Defender for
Endpoint for insider risk management integration in the Defender Security Center to
import security violation alerts. For step-by-step guidance to enable Defender for Endpoint
integration with insider risk management, see Configure advanced features in Microsoft
Defender for Endpoint.
• When using Disgruntled user templates, you must configure a Microsoft 365 HR connector
to periodically import performance or demotion status information for users in your
organization. See the Import data with the HR connector article for step-by-step guidance
https://docs.microsoft.com/en-us/microsoft-365/compliance
/insider-risk-management-plan?view=o365-worldwide
Detect, investigate, respond, and remediate endpoint threats by using

Microsoft Defender for Endpoint
Manage data retention, alert notification, and advanced features
During the onboarding process, a wizard takes you through the data storage and retention
settings of Defender for Endpoint.
After completing the onboarding, you can verify your selection in the data retention settings
page.
Verify data storage location
During the Set up phase, you would have selected the location to store your data.
You can verify the data location by navigating to Settings > Endpoints > Data
retention (under General).
Update data retention settings
You can update the data retention settings. By default, the retention period is 180 days.
1. In the navigation pane, select Settings > Endpoints > Data retention (under General).
2. Select the data retention duration from the drop-down list.
3. Click Save preferences.
https://docs.microsoft.com/en-us/microsoft-365/security/defender-endpoint/data-retention-
settings?view=o365-worldwide
Configure alert notifications in Microsoft Defender for Endpoint
You can configure Defender for Endpoint to send email notifications to specified recipients for
new alerts. This feature enables you to identify a group of individuals who will immediately be
informed and can act on alerts based on their severity.
You can set the alert severity levels that trigger notifications. You can also add or remove
recipients of the email notification. New recipients get notified about alerts triggered after
they're added.
If you're using role-based access control (RBAC), recipients will only receive notifications based
on the device groups that were configured in the notification rule. Users with the proper
permission can only create, edit, or delete notifications that are limited to their device group
management scope. Only users assigned to the Global administrator role can manage
notification rules that are configured for all device groups.
The email notification includes basic information about the alert and a link to the portal where
you can do further investigation.
Create rules for alert notifications

1. In the navigation pane, select Settings > Endpoints > General > Email notifications.
2. Click Add item.
3. Specify the General information:
• Rule name - Specify a name for the notification rule.
• Include organization name - Specify the customer name that appears on the email no-
tification.
• Include tenant-specific portal link - Adds a link with the tenant ID to allow access to a
specific tenant.
• Include device information - Includes the device name in the email alert body.
• Devices - Choose whether to notify recipients for alerts on all devices (Global adminis-
trator role only) or on selected device groups.
• Alert severity - Choose the alert severity level.
4. Click Next.
5. Enter the recipient's email address then click Add recipient. You can add multiple email
addresses.
6. Check that email recipients can receive the email notifications by selecting Send test
email.
7.Click Save notification rule.
Edit a notification rule

1. Select the notification rule you'd like to edit.
2. Update the General and Recipient tab information.
3. Click Save notification rule.
Delete notification rule

1. Select the notification rule you'd like to delete.
2. Click Delete.
Troubleshoot email notifications for alerts

This section lists various issues that you may encounter when using email notifications
for alerts.
Problem: Intended recipients report they're not getting the notifications.
Solution: Make sure that the notifications aren't blocked by email filters:
Check that the Defender for Endpoint email notifications aren't sent to the Junk Email folder.
Mark them as Not junk.
1. Check that the Defender for Endpoint email notifications aren't sent to the Junk Email fold-
er. Mark them as Not junk.
2. Check that your email security product isn't blocking the email notifications from Defender
for Endpoint.
3. Check your email application rules that might be catching and moving your Defender for
Endpoint email notifications.
https://docs.microsoft.com/en-us/microsoft-365/security/defender-endpoint/
configure-email-notifications?view=o365-worldwide
Configure advanced features in Defender for Endpoint
Depending on the Microsoft security products that you use, some advanced features might be
available for you to integrate Defender for Endpoint with.
Enable advanced features

1. In the navigation pane, select Settings > Endpoints > Advanced features.
2. Select the advanced feature you want to configure and toggle the setting be-
tween On and Off.
3. Click Save preferences.
Use the following advanced features to get better protected from potentially malicious files
and gain better insight during security investigations.
advanced-features?view=o365-worldwide
Configure device attack surface reduction rules
Why attack surface reduction rules are important

Your organization's attack surface includes all the places where an attacker could compromise
your organization's devices or networks. Reducing your attack surface means protecting your
organization's devices and network, which leaves attackers with fewer ways to perform
attacks. Configuring attack surface reduction rules in Microsoft Defender for Endpoint can
help!
Attack surface reduction rules target certain software behaviors, such as:
• Launching executable files and scripts that attempt to download or run files
• Running obfuscated or otherwise suspicious scripts
• Performing behaviors that apps don't usually initiate during normal day-to-day work
Such software behaviors are sometimes seen in legitimate applications. However, these
behaviors are often considered risky because they are commonly abused by attackers through
malware. Attack surface reduction rules can constrain software-based risky behaviors and help
keep your organization safe.
For more information about configuring attack surface reduction rules, see Enable attack
surface reduction rules.
Assess rule impact before deployment
You can assess how an attack surface reduction rule might affect your network by opening the
security recommendation for that rule in threat and vulnerability management.
Advanced hunting and attack surface reduction events

You can use advanced hunting to view attack surface reduction events. To streamline the
volume of incoming data, only unique processes for each hour are viewable with advanced
hunting. The time of an attack surface reduction event is the first time that event is seen
within the hour.
Attack surface reduction features across Windows versions

You can set attack surface reduction rules for devices that are running any of the following
editions and versions of Windows:
• Windows 10 Pro, version 1709 or later

• Windows 10 Enterprise, version 1709 or later
• Windows Server, version 1803 (Semi-Annual Channel) or later
• Windows Server 2019
• Windows Server 2016
• Windows Server 2012 R2
https://docs.microsoft.com/en-us/microsoft-365/security/
defender-endpoint/attack-surface-reduction?view=o365-worldwide
Configure attack surface reduction capabilities

To configure attack surface reduction in your environment, follow these steps:
1. Enable hardware-based isolation for Microsoft Edge.

2. Enable application control.
A. Review base policies in Windows. See Example Base Policies.
B. See the Windows Defender Application Control design guide.
C. Refer to Deploying Windows Defender Application Control (WDAC) policies.
3. Enable controlled folder access.
4. Turn on Network protection.
5. Enable exploit protection.
6. Deploy attack surface reduction rules.
7. Set up your network firewall.
A. Get an overview of Windows Defender Firewall with advanced security.
B. Use the Windows Defender Firewall design guide to decide how you want to design
your firewall policies.
C. Use the Windows Defender Firewall deployment guide to set up your organization's
firewall with advanced security.
defender-endpoint/overview-attack-surface-reduction?view=o365-worldwide
Configure and manage custom detections and alerts
The Security operations dashboard is where the endpoint detection and response capabilities
are surfaced. It provides a high level overview of where detections were seen and highlights
where response actions are needed.
The dashboard displays a snapshot of:
• Active alerts
• Devices at risk
• Sensor health
• Service health
• Daily devices reporting
• Active automated investigations
• Automated investigations statistics
• Users at risk
• Suspicious activities
You can view the overall number of active alerts from the last 30 days in your network from
the tile. Alerts are grouped into New and In progress
Each group is further sub-categorized into their corresponding alert severity levels. Click the
number of alerts inside each alert ring to see a sorted view of that category's queue
(New or In progress).
https://docs.microsoft.com/en-us/microsoft-365/security/defender-
endpoint/security-operations-dashboard?view=o365-worldwide
Respond to incidents and alerts
The Incidents queue shows a collection of incidents that were flagged from devices in your
network. It helps you sort through incidents to prioritize and create an informed cybersecurity
response decision.
By default, the queue displays incidents seen in the last 30 days, with the most recent incident
showing at the top of the list, helping you see the most recent incidents first.
On the top navigation you can:
• Customize columns to add or remove columns

• Modify the number of items to view per page
• Select the items to show per page
• Batch-select the incidents to assign
• Navigate between pages
• Apply filters
defender-endpoint/view-incidents-queue?view=o365-worldwide
The Alerts queue shows a list of alerts that were flagged from devices in your network. By
default, the queue displays alerts seen in the last 30 days in a grouped view. The most recent
alerts are shown at the top of the list helping you see the most recent alerts first.
There are several options you can choose from to customize the alerts view.
On the top navigation you can:

• Customize columns to add or remove columns
• Apply filters
• Display the alerts for a particular duration like 1 Day, 3 Days, 1 Week, 30 Days, and 6
Months
• Export the alerts list to excel
• Manage Alerts
defender-endpoint/alerts-queue?view=o365-worldwide
Manage automated investigations and remediations Assess and recommend

endpoint configurations to reduce and remediate vulnerabilities by using
Microsoft’s Threat and Vulnerability Management solution.
To configure automated investigation and remediation:

1. Turn on the features; and
2. Set up device groups.
Turn on automated investigation and remediation

1.As a global administrator or security administrator, go to the Microsoft 365 Defender
portal (https://security.microsoft.com) and sign in.
2.In the navigation pane, choose Settings.
3.In the General section, select Advanced features.
4.Turn on both Automated Investigation and Automatically resolve alerts.
Set up device groups

1. In the Microsoft 365 Defender portal (https://security.microsoft.com), on
the Settings page, under Permissions, select Device groups.
2. Select + Add device group.
3. Create at least one device group, as follows:
• Specify a name and description for the device group.
• In the Automation level list, select a level, such as Full - remediate threats
automatically. The automation level determines whether remediation actions are
taken automatically, or only upon approval. To learn more, see Automation levels in
automated investigation and remediation.
• In the Members section, use one or more conditions to identify and include devices.
• On the User access tab, select the Azure Active Directory groups who should have
access to the device group you're creating.
4. Select Done when you're finished setting up your device group.
configure-automated-investigations-remediation?view=o365-worldwide
Manage Microsoft Defender for Endpoint threat indicators

Indicator of compromise (IoCs) matching is an essential feature in every endpoint protection
solution. This capability gives SecOps the ability to set a list of indicators for detection and for
blocking (prevention and response).
Create indicators that define the detection, prevention, and exclusion of entities. You can
define the action to be taken as well as the duration for when to apply the action as well as
the scope of the device group to apply it to.
Currently supported sources are the cloud detection engine of Defender for Endpoint, the
automated investigation and remediation engine, and the endpoint prevention engine
(Microsoft Defender Antivirus).
When creating a new indicator (IoC), one or more of the following actions are available:
• Allow – the IoC will be allowed to run on your devices.

• Audit – an alert will be triggered when the IoC runs.
• Warn – the IoC will prompt a warning that the user can bypass
• Block execution - the IoC will not be allowed to run.
• Block and remediate - the IoC will not be allowed to run and a remediation action will be
applied to the IoC.
You can create an indicator for:
• Files
• IP addresses, URLs/domains
• Certificates
https://docs.microsoft.com/en-us/microsoft-365/security/defender-endpoint/manage-indicators?view=o365-
worldwide
Analyze Microsoft Defender for Endpoint threat analytics
With more sophisticated adversaries and new threats emerging frequently and prevalently, it's
critical to be able to quickly:
• Assess the impact of new threats

• Review your resilience against or exposure to the threats
• Identify the actions you can take to stop or contain the threats
• Threat analytics is a set of reports from expert Microsoft security researchers covering the
most relevant threats, including:
• Active threat actors and their campaigns
• Popular and new attack techniques
• Critical vulnerabilities
• Common attack surfaces
• Prevalent malware
defender-endpoint/threat-analytics?view=o365-worldwide
Detect, investigate, respond, and remediate identity threats

Identify and remediate security risks related to sign-in risk policies
As we learned in the previous article, Identity Protection policies we have two risk policies that
we can enable in our directory.
• Sign-in risk policy

• User risk policy
Both policies work to automate the response to risk detections in your environment and allow
users to self-remediate when risk is detected.
Organizations can choose to block access when risk is detected. Blocking sometimes stops
legitimate users from doing what they need to. A better solution is to allow self-remediation
using Azure AD Multi-Factor Authentication (MFA) and self-service password reset (SSPR).
• When a sign-in risk policy triggers:

 Azure AD MFA can be triggered, allowing to user to prove it is them by using one of their
registered authentication methods, resetting the sign-in risk.
https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/howto-identity-
protection-configure-risk-policies
Identify and remediate security risks related to Conditional Access events
The Conditional Access insights and reporting workbook enables you to understand the
impact of Conditional Access policies in your organization over time. During sign-in, one or
more Conditional Access policies may apply, granting access if certain grant controls are
satisfied or denying access otherwise. Because multiple Conditional Access policies may be
evaluated during each sign-in, the insights and reporting workbook lets you examine the
impact of an individual policy or a subset of all policies.
To configure a Conditional Access policy in report-only mode:

1. Sign into the Azure portal as a Conditional Access administrator, security administrator, or
global administrator.
2. Browse to Azure Active Directory > Security > Conditional Access.
3. Select an existing policy or create a new policy.
4. Under Enable policy set the toggle to Report-only mode.
5. Select Save
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/howto-
conditional-access-insights-reporting
Identify and remediate security risks related to Azure Active Directory
The identity secure score is percentage that functions as an indicator for how aligned you are
with Microsoft's best practice recommendations for security. Each improvement action in
identity secure score is tailored to your specific configuration.
The score helps you to:

• Objectively measure your identity security posture
• Plan identity security improvements
• Review the success of your improvements
You can access the score and related information on the identity secure score dashboard. On
this dashboard, you find: Your identity secure score
• A comparison graph showing how your Identity secure score compares to other tenants in
the same industry and similar size
• A trend graph showing how your Identity secure score has changed over time
• A list of possible improvements
By following the improvement actions, you can:

• Improve your security posture and your score
Take advantage the features available to your organization as part of your identity
investments
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/identity-secure-score
Identify and remediate security risks using Secure Score
Microsoft Secure Score is a measurement of an organization's security posture, with a higher

number indicating more improvement actions taken. It can be found at https://
security.microsoft.com/securescore in the Microsoft 365 Defender portal.
Following the Secure Score recommendations can protect your organization from threats.
From a centralized dashboard in the Microsoft 365 Defender portal, organizations can monitor
and work on the security of their Microsoft 365 identities, apps, and devices.
Secure Score helps organizations:

• Report on the current state of the organization's security posture.
• Improve their security posture by providing discoverability, visibility, guidance, and
control.
Compare with benchmarks and establish key performance indicators (KPIs).
https://docs.microsoft.com/en-us/microsoft-365/security/defender/microsoft-secure-score?
view=o365-worldwide
Identify, investigate, and remediate security risks related to privileged identities
Privileged Identity Management (PIM) generates alerts when there is suspicious or unsafe
activity in your Azure Active Directory (Azure AD) organization. When an alert is triggered, it
shows up on the Privileged Identity Management dashboard. Select the alert to see a report
that lists the users or roles that triggered the alert.
This section lists all the security alerts for Azure AD roles, along with how to fix and how to
prevent. Severity has the following meaning:
• High: Requires immediate action because of a policy violation.

• Medium: Does not require immediate action but signals a potential policy violation.
• Low: Does not require immediate action but suggests a preferable policy change.
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/
pim-how-to-configure-security-alerts
Configure detection alerts in Azure AD Identity Protection
Azure AD Identity Protection sends two types of automated notification emails to help you
manage user risk and risk detections:
• Users at risk detected email
• Weekly digest email
Configure users at risk detected alerts
As an administrator, you can set:
• The user risk level that triggers the generation of this email - By default, the risk level is
set to “High” risk.
• The recipients of this email - Users in the Global administrator, Security administrator, or
Security reader roles are automatically added to this list. We attempt to send emails to the
first 20 members of each role. If a user is enrolled in PIM to elevate to one of these roles on
demand, then they will only receive emails if they are elevated at the time the email is sent.
• Optionally you can Add custom email here users defined must have the appropriate
permissions to view the linked reports in the Azure portal.
Configure the users at risk email in the Azure portal under Azure Active
Directory > Security > Identity Protection > Users at risk detected alerts.
https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/howto-identity-
protection-configure-notifications
Identify and remediate security risks related to Active Directory Domain

Services using Microsoft Defender for Identity
Microsoft Defender for Identity security alerts explain the suspicious activities detected by
Defender for Identity sensors on your network, and the actors and computers involved in each
threat. Alert evidence lists contain direct links to the involved users and computers, to help
make your investigations easy and direct.
Defender for Identity security alerts are divided into the following categories or phases, like
the phases seen in a typical cyber-attack kill chain. Learn more about each phase, the alerts
designed to detect each attack, and how to use the alerts to help protect your network using
the following links:
1. Reconnaissance phase alerts

2. Compromised credential phase alerts
3. Lateral movement phase alerts
4. Domain dominance phase alerts
 Exfiltration phase alerts
https://docs.microsoft.com/en-us/defender-for-identity/suspicious-activity-guide?view=o365-
worldwide
Detect, investigate, respond, and remediate application threats
Identify, investigate, and remediate security risks by using Microsoft Cloud

Application Security (MCAS)
Security operations teams are challenged to monitor user activity, suspicious or otherwise,
across all dimensions of the identity attack surface, using multiple security solutions that often
aren't connected. While many companies now have hunting teams to proactively identify
threats in their environments, knowing what to look for across the vast amount of data can be
a challenge. Microsoft Defender for Cloud Apps now simplifies this by taking away the need to
create complex correlation rules, and lets you look for attacks that span across your cloud and
on-premises network.
Defender for Cloud Apps uses the following to measure risk:
• Alert scoring
The alert score represents the potential impact of a specific alert on each user. Alert
scoring is based on severity, user impact, alert popularity across users, and all entities
in the organization.
• Activity scoring
The activity score determines the probability of a specific user performing a specific
activity, based on behavioral learning of the user and their peers. Activities identified
as the most abnormal receive the highest scores.
• Blast radius (Preview)

Blast radius adds an additional score factor to the investigation priority calculations,
based on multiple factors that determine the potential impact a compromised user has
on the organization.
Phase 1: Connect to the apps you want to protect

Phase 2: Identify top risky users
Phase 3: Further investigate users
Phase 4: Protect your organization
https://docs.microsoft.com/en-us/defender-cloud-apps/tutorial-ueba
Detect suspicious user activity with UEBA
Microsoft Defender for Cloud Apps provides best-of-class detections across the attack kill
chain for compromised users, insider threats, exfiltration, ransomware, and more. Our
comprehensive solution is achieved by combining multiple detection methods, including
anomaly, behavioral analytics (UEBA), and rule-based activity detections, to provide a broad
view of how your users use apps in your environment.
So why is it important to detect suspicious behavior? The impact of a user able to alter your
cloud environment can be significant and directly impact your ability to run your business. For
instance, key corporate resources like the servers running your public website or service
you're providing to customers can be compromised.
Using data captured from several sources, Defender for Cloud Apps analyzes the data to
extract app and user activities in your organization giving your security analysts visibility into
cloud use. The collected data is correlated, standardized, and enriched with threat
intelligence, location, and many other details to provide an accurate, consistent view of
suspicious activities.
How to tune user activity detections to identify true compromises and reduce alert fatigue
resulting from handling large volumes of false positive detections:
 Configure IP address ranges

 Tune anomaly detection policies
 Tune cloud discovery anomaly detection policies
 Tune rule-based detection policies
 Configure alerts
 Investigate and remediate
https://docs.microsoft.com/en-us/defender-cloud-apps/tutorial-suspicious-activity
Investigate and remediate risky OAuth apps
OAuth is an open standard for token-based authentication and authorization. OAuth enables a
user's account information to be used by third-party services, without exposing the user's
password. OAuth acts as an intermediary on behalf of the user, providing the service with an
access token that authorizes specific account information to be shared.
Our recommended approach is to investigate the apps by using the abilities and information
provided in the Defender for Cloud Apps portal to filter out apps with a low chance of being
risky, and focus on the suspicious apps.
• Detect risky OAuth apps

Detecting a risky OAuth app can be accomplished using:
Alerts: React to an alert triggered by an existing policy.
Hunting: Search for a risky app among all the available apps, without concrete suspicion of a
risk.
Investigate risky OAuth apps
• After you determine that an app is suspicious and you want to investigate it, we
recommend the following key principles for efficient investigation:
• The more common and used an app is, either by your organization or online, the more
likely it is to be safe.
• An app should require only permissions that are related to the app's purpose. If that's not
the case, the app might be risky.
• Apps that require high privileges or admin consent are more likely to be risky.
Remediate risky OAuth apps
How to remediate suspicious OAuth apps
After you determine that an OAuth app is risky, Defender for Cloud Apps provides the
following remediation options:
• Manual remediation: You can easily ban revoke an app from the OAuth apps page
• Automatic remediation: You can create a policy that automatically revokes an app or
revokes a specific user from an app.
https://docs.microsoft.com/en-us/defender-cloud-apps/investigate-risky-oauth
Configure MCAS to generate alerts and reports to detect threats
Alerts are the entry points to understanding your cloud environment more deeply. You might
want to create new policies based on what you find. For example, you might see an
administrator signing in from Greenland, and no one in your organization ever signed in from
Greenland before. You can create a policy that automatically suspends an admin account
when it's used to sign in from that location.
It's a good idea to review all of your alerts and use them as tools for modifying your policies. If
harmless events are being considered violations to existing policies, refine your policies so that
you receive fewer unnecessary alerts.
https://docs.microsoft.com/en-us/defender-cloud-apps/managing-alerts
Manage cross-domain investigations in Microsoft 365 Defender

portal
Manage incidents across Microsoft 365 Defender products
Incident management is critical to ensuring that incidents are named, assigned, and tagged to
optimize time in your incident workflow and more quickly contain and address threats.
Here are the ways you can manage your incidents:

• Edit the incident name
• Add incident tags
• Assign the incident to a user account
• Resolve them
• Specify its classification
• Add comments
https://docs.microsoft.com/en-us/microsoft-365/security/defender/manage-incidents?
view=o365-worldwide
Manage actions pending approval across products
It's important to approve (or reject) pending actions as soon as possible so that your
automated investigations can proceed and complete in a timely manner.
1. Go to Microsoft 365 Defender portal and sign in.

2. In the navigation pane, choose Action center.
3. In the Action center, on the Pending tab, select an item in the list. Its flyout pane opens.
4. Review the information in the flyout pane, and then take one of the following steps:
• Select Open investigation page to view more details about the investigation.
• Select Approve to initiate a pending action.
• Select Reject to prevent a pending action from being taken.
• Select Go hunt to go into Advanced hunting.
https://docs.microsoft.com/en-us/microsoft-365/security/defender/m365d-autoir-actions?
view=o365-worldwide
Perform advanced threat hunting
With advanced hunting in Microsoft 365 Defender, you can create queries that locate
individual artifacts associated with ransomware activity. You can also run more sophisticated
queries that can look for signs of activity and weigh those signs to find devices that require
immediate attention.
Check for individual signs of ransomware activity
Many activities that constitute ransomware behavior, including the activities described in the
preceding section, can be benign. When using the following queries to locate ransomware, run
more than one query to check whether the same devices are exhibiting various signs of
possible ransomware activity.
• Stopping multiple processes using taskkill.exe

• Stopping processes using net stop
• Deletion of data on multiple drives using cipher.exe
• Clearing of forensic evidence from event logs using wevtutil
• Turning off services using sc.exe
• Turning off System Restore
• Backup deletion
Check for multiple signs of ransomware activity

Instead of running several queries separately, you can also use a comprehensive query that
checks for multiple signs of ransomware activity to identify affected devices. The following
consolidated query:
• Looks for both relatively concrete and subtle signs of ransomware activity
• Weighs the presence of these signs
• Identifies devices with a higher chance of being targets of ransomware
When run, this consolidated query returns a list of devices that have exhibited multiple signs
of attack. The count of each type of ransomware activity is also shown. To run this consolidat-
ed query, copy it directly to the advanced hunting query editor.
defender/advanced-hunting-find-ransomware?view=o365-worldwide
Mitigate threats using Microsoft Defender for Cloud (25-30%)
Use Microsoft Defender for Cloud, for Azure, hybrid cloud, and on-premises workload protec-
tion and security. This learning path aligns with exam SC-200: Microsoft Security Operations
Analyst.
You can access the Microsoft Learn materials online content here:
https://docs.microsoft.com/en-us/learn/paths/sc-200-mitigate-
threats-using-azure-defender/
Design and configure a Microsoft Defender for Cloud implementation
Plan and configure Microsoft Defender for Cloud settings, including selecting
target subscriptions and workspace
Use management groups to efficiently manage access, policies, and reporting on groups of
subscriptions, as well as effectively manage the entire Azure estate by performing actions on
the root management group. You can organize subscriptions into management groups and
apply your governance policies to the management groups. All subscriptions within a
management group automatically inherit the policies applied to the management group.
The root management group is created automatically when you do any of the following
actions:
• Open Management Groups in the Azure portal.

• Create a management group with an API call.
• Create a management group with PowerShell. For PowerShell instructions, see Create
management groups for resource and organization management.
Information about exporting to a Log Analytics workspace
If you want to analyze Microsoft Defender for Cloud data inside a Log Analytics workspace or
use Azure alerts together with Defender for Cloud alerts, set up continuous export to your Log
Analytics workspace.
Log Analytics tables and schemas
Security alerts and recommendations are stored in the Security Alert and Security
Recommendation tables respectively.
The name of the Log Analytics solution containing these tables depends on whether you have
enabled the enhanced security features: Security ('Security and Audit') or SecurityCenterFree.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/continuous-export
Configure Microsoft Defender for Cloud roles
Defender for Cloud uses Azure role-based access control (Azure RBAC), which provides built-in
roles that can be assigned to users, groups, and services in Azure.
Defender for Cloud assesses the configuration of your resources to identify security issues and
vulnerabilities. In Defender for Cloud, you only see information related to a resource when
you are assigned the role of Owner, Contributor, or Reader for the subscription or the re-
source's resource group.
In addition to the built-in roles, there are two roles specific to Defender for Cloud:
• Security Reader: A user that belongs to this role has viewing rights to Defender for Cloud.
The user can view recommendations, alerts, a security policy, and security states, but cannot
make changes.
• Security Admin: A user that belongs to this role has the same rights as the Security Reader
and can also update the security policy and dismiss alerts and recommendations.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/permissions
Configure data retention policies
The following steps describe how to configure how long log data is kept by in your workspace.
Data retention at the workspace level can be configured from 30 to 730 days (2 years) for all
workspaces unless they're using the legacy Free Trial pricing tier. Retention for individual data
types can be set as low as 4 days. Learn more about pricing for longer data retention. To retain
data longer than 730 days, consider using Log Analytics workspace data export.
Workspace level default retention

To set the default retention for your workspace:
In the Azure portal, from your workspace, select Usage and estimated costs in the left
pane.
On the Usage and estimated costs page, select Data Retention at the top of the page.
On the pane, move the slider to increase or decrease the number of days, and then se-
lect OK. If you're on the free tier, you can't modify the data retention period; you need to
upgrade to the paid tier to control this setting.
https://docs.microsoft.com/en-us/azure/azure-monitor/logs/manage-cost-storage
Assess and recommend cloud workload protection
Defender for Cloud's recommendations are based on the Azure Security Benchmark. Azure
Security Benchmark is the Microsoft-authored, Azure-specific set of guidelines for security and
compliance best practices based on common compliance frameworks. This widely respected
benchmark builds on the controls from the Center for Internet Security (CIS) and the National
Institute of Standards and Technology (NIST) with a focus on cloud-centric security.
Tip
If a recommendation's description says "No related policy", it's usually because that
recommendation is dependent on a different recommendation and its policy. For example,
the recommendation "Endpoint protection health failures should be remediated...", relies
on the recommendation that checks whether an endpoint protection solution is
even installed ("Endpoint protection solution should be installed..."). The underlying
recommendation does have a policy. Limiting the policies to only the foundational
recommendation simplifies policy management.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/recommendations-reference
Plan and implement the use of data connectors for ingestion of data
sources in Microsoft Defender for Cloud
Identify data sources to be ingested for Microsoft Defender for Cloud
This document helps you to manage security solutions already connected to Microsoft
Defender for Cloud and add new ones.
Integrated Azure security solutions

Defender for Cloud makes it easy to enable integrated security solutions in Azure. Benefits
include:
• Simplified deployment: Defender for Cloud offers streamlined provisioning of integrated

partner solutions. For solutions like antimalware and vulnerability assessment, Defender for
Cloud can provision the agent on your virtual machines. For firewall appliances, Defender for
Cloud can take care of much of the network configuration required.
• Integrated detections: Security events from partner solutions are automatically collected,
aggregated, and displayed as part of Defender for Cloud alerts and incidents. These events
also are fused with detections from other sources to provide advanced threat-detection
capabilities.
• Unified health monitoring and management: Customers can use integrated health events
to monitor all partner solutions at a glance. Basic management is available, with easy access to
advanced setup by using the partner solution.
Defender for Cloud also offers vulnerability analysis for your:

SQL databases
Azure Container Registry images
https://docs.microsoft.com/en-us/azure/defender-for-cloud/partner-integration
Configure automated onboarding for Azure resources
Microsoft Defender for Cloud collects data from your resources using the relevant agent or
extensions for that resource and the type of data collection you've enabled. Use the
procedures below to ensure your resources have the necessary agents and extensions used by
Defender for Cloud.
Defender for Cloud collects data from your Azure virtual machines (VMs), virtual machine
scale sets, IaaS containers, and non-Azure (including on-premises) machines to monitor for
security vulnerabilities and threats.
Data collection is required to provide visibility into missing updates, misconfigured OS security
settings, endpoint protection status, and health and threat protection. Data collection is only
needed for compute resources such as VMs, virtual machine scale sets, IaaS containers, and
non-Azure computers.
Data is collected using:
• The Log Analytics agent, which reads various security-related configurations and event
logs from the machine and copies the data to your workspace for analysis. Examples of such
data are: operating system type and version, operating system logs (Windows event logs),
running processes, machine name, IP addresses, and logged in user.
• Security extensions, such as the Azure Policy Add-on for Kubernetes, which can also
provide data to Defender for Cloud regarding specialized resource types.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/enable-data-collection
Connect on-premises computers

Defender for Cloud can monitor the security posture of your non-Azure computers, but first
you need to connect them to Azure.
You can connect your non-Azure computers in any of the following ways:
• Using Azure Arc-enabled servers (recommended)

• From Defender for Cloud's pages in the Azure portal (Getting started and Inventory)
https://docs.microsoft.com/en-us/azure/defender-for-cloud/quickstart-onboard-machines
Connect AWS cloud resources
With cloud workloads commonly spanning multiple cloud platforms, cloud security services
must do the same.
Microsoft Defender for Cloud protects workloads in Azure, Amazon Web Services (AWS), and
Google Cloud Platform (GCP).
To protect your AWS-based resources, you can connect an account with one of two
mechanisms:
• Classic cloud connectors experience - As part of the initial multi-cloud offering, we
introduced these cloud connectors as a way to connect your AWS and GCP projects. If
you've already configured an AWS connector through the classic cloud connectors
experience, we recommend deleting these connectors (as explained in Remove classic
connectors), and connecting the account again using the newer mechanism. If you don't
do this before creating the new connector through the environment settings page, do so
afterwards to avoid seeing duplicate recommendations.
• Environment settings page - This preview page provides a greatly improved, simpler,
onboarding experience (including auto provisioning). This mechanism also extends
Defender for Cloud's enhanced security features to your AWS resources:
 Defender for Cloud's CSPM features extends to your AWS resources.

 Microsoft Defender for Containers brings threat detection and advanced
defenses to your Amazon EKS clusters. Microsoft Defender for servers brings
threat detection and advanced defenses to your GCP VM instances
 Microsoft Defender for servers brings threat detection and advanced defenses to
your Windows and Linux EC2 instances.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/quickstart-onboard-aws
Connect GCP cloud resources
To protect your GCP-based resources, you can connect an account in two different ways:
• Classic cloud connectors experience - As part of the initial multi-cloud offering, we intro-
duced these cloud connectors as a way to connect your AWS and GCP projects.
• Environment settings page (Recommended) - This page provides the onboarding experi-
ence (including auto provisioning). This mechanism also extends Defender for Cloud's en-
hanced security features to your GCP resources:
 Defender for Cloud's CSPM features extends to your GCP resources.

 Microsoft Defender for Containers - Microsoft Defender for Containers brings
threat detection and advanced defenses to your Google's Kubernetes Engine
(GKE) Standard clusters
 Microsoft Defender for servers brings threat detection and advanced defenses
to your GCP VM instances
https://docs.microsoft.com/en-us/azure/defender-for-cloud/quickstart-onboard-gcp
Configure data collection
The Add data sources section includes other available data sources that can be connected. For
instructions on adding data from any of these sources, click ADD.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/partner-integration
Manage Microsoft Defender for Cloud alert rules
Validate alert configuration
Defender for Cloud generates alerts for resources deployed on your Azure, on-premises, and
hybrid cloud environments.
Alerts are the notifications that Defender for Cloud generates when it detects threats on your
resources. Defender for Cloud prioritizes and lists the alerts, along with the information need-
ed for you to quickly investigate the problem. Defender for Cloud also provides detailed steps
to help you remediate attacks. Alerts data is retained for 90 days.
A security incident is a collection of related alerts, instead of listing each alert individually. De-
fender for Cloud uses Cloud smart alert correlation (incidents) to correlate different alerts and
low fidelity signals into security incidents.
Using incidents, Defender for Cloud provides you with a single view of an attack campaign and
all of the related alerts. This view enables you to quickly understand what actions the attacker
took, and what resources were affected.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/alerts-overview
Setup email notifications
Use Defender for Cloud's Email notifications settings page to define preferences for notifica-
tion emails including:
• who should be notified - Emails can be sent to select individuals or to anyone with a speci-
fied Azure role for a subscription.
• what they should be notified about - Modify the severity levels for which Defender for
Cloud should send out notifications.
To avoid alert fatigue, Defender for Cloud limits the volume of outgoing mails. For each sub-
scription, Defender for Cloud sends:
approximately four emails per day for high-severity alerts
approximately two emails per day for medium-severity alerts
approximately one email per day for low-severity alerts
https://docs.microsoft.com/en-us/azure/defender-for-cloud/configure-email-notifications
Create and manage alert suppression rules
The various Microsoft Defender plans detect threats in any area of your environment and
generate security alerts.
When a single alert isn't interesting or relevant, you can manually dismiss it. Alternatively, use
the suppression rules feature to automatically dismiss similar alerts in the future. Typically,
you'd use a suppression rule to:
• Suppress alerts that you've identified as false positives

• Suppress alerts that are being triggered too often to be useful
Your suppression rules define the criteria for which alerts should be automatically dismissed.
There are a few ways you can create rules to suppress unwanted security alerts:
• To suppress alerts at the management group level, use Azure Policy

• To suppress alerts at the subscription level, you can use the Azure portal or the REST API
https://docs.microsoft.com/en-us/azure/defender-for-cloud/alerts-suppression-rules
Configure automation and remediation
Configure automated responses in Microsoft Defender for Cloud
Every security program includes multiple workflows for incident response. These processes
might include notifying relevant stakeholders, launching a change management process, and
applying specific remediation steps. Security experts recommend that you automate as many
steps of those procedures as you can. Automation reduces overhead. It can also improve your
security by ensuring the process steps are done quickly, consistently, and according to your
predefined requirements.
This article describes the workflow automation feature of Microsoft Defender for Cloud. This
feature can trigger Logic Apps on security alerts, recommendations, and changes to regulatory
compliance. For example, you might want Defender for Cloud to email a specific user when an
alert occurs.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/workflow-automation
Design and configure workflow automation in Microsoft Defender for Cloud
Every security program includes multiple workflows for incident response. These processes
might include notifying relevant stakeholders, launching a change management process, and
applying specific remediation steps. Security experts recommend that you automate as many
steps of those procedures as you can. Automation reduces overhead. It can also improve your
security by ensuring the process steps are done quickly, consistently, and according to your
predefined requirements.
This article describes the workflow automation feature of Microsoft Defender for Cloud. This
feature can trigger Logic Apps on security alerts, recommendations, and changes to regulatory
compliance. For example, you might want Defender for Cloud to email a specific user when an
alert occurs. You'll also learn how to create Logic Apps using Azure Logic Apps.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/workflow-automation
Remediate incidents by using Microsoft Defender for Cloud recommendations
Using the policies, Defender for Cloud periodically analyzes the compliance status of your
resources to identify potential security misconfigurations and weaknesses. It then provides
you with recommendations on how to remediate those issues. Recommendations are the
result of assessing your resources against the relevant policies and identifying resources that
aren't meeting your defined requirements.
Defender for Cloud makes its security recommendations based on your chosen initiatives.
When a policy from your initiative is compared against your resources and finds one or more
that aren't compliant it is presented as a recommendation in Defender for Cloud.
Recommendations are actions for you to take to secure and harden your resources. Each
recommendation provides you with the following information:
• A short description of the issue

• The remediation steps to carry out in order to implement the recommendation
• The affected resources
https://docs.microsoft.com/en-us/azure/defender-for-cloud/security-policy-concept
Create an automatic response using an Azure Resource Manager template
An ARM template is a JavaScript Object Notation (JSON) file that defines the infrastructure and
configuration for your project. The template uses declarative syntax. In declarative syntax, you
describe your intended deployment without writing the sequence of programming commands
to create the deployment.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/quickstart-automation-alert
Investigate Microsoft Defender for Cloud alerts and incidents

Describe alert types for Azure workloads
Defender for Cloud generates alerts for resources deployed on your Azure, on-premises, and
hybrid cloud environments.
Security alerts are triggered by advanced detections and are available only with enhanced
security features enabled. You can upgrade from the Environment settings page, as described
in QuickStart: Enable enhanced security features.
Defender for Cloud assigns a severity to alerts, to help you prioritize the order in which you
attend to each alert, so that when a resource is compromised, you can get to it right away. The
severity is based on how confident Defender for Cloud is in the finding or the analytic used to
issue the alert as well as the confidence level that there was malicious intent behind the
activity that led to the alert.
Severity Recommended response
High There is a high probability that your resource is compromised. You should look into it right away.
Defender for Cloud has high confidence in both the malicious intent and in the findings used to is-
sue the alert. For example, an alert that detects the execution of a known malicious tool such as
Mimikatz, a common tool used for credential theft.
Medium This is probably a suspicious activity might indicate that a resource is compromised. Defender for
Cloud's confidence in the analytic or finding is medium and the confidence of the malicious intent is
medium to high. These would usually be machine learning or anomaly-based detections. For exam-
ple, a sign-in attempt from an anomalous location.
Low This might be a benign positive or a blocked attack. Defender for Cloud isn't confident enough that
the intent is malicious and the activity might be innocent. For example, log clear is an action that
might happen when an attacker tries to hide their tracks, but in many cases is a routine operation
performed by admins. Defender for Cloud doesn't usually tell you when attacks were blocked, un-
less it's an interesting case that we suggest you look into.
Informational An incident is typically made up of a number of alerts, some of which might appear on their own to
be only informational, but in the context of the other alerts might be worthy of a closer look.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/alerts-overview
Manage security alerts
Microsoft Defender for Cloud continuously analyzes your hybrid cloud workloads using
advanced analytics and threat intelligence to alert you about potentially malicious activities in
your cloud resources. You can also integrate alerts from other security products and services
into Defender for Cloud. Once an alert is raised, swift action is needed to investigate and
remediate the potential security issue.
Triage security alerts

Defender for Cloud provides a unified view of all security alerts. Security alerts are
ranked based on the severity of the detected activity.
Triage your alerts from the Security alerts page
Use this page to review the active security alerts in your environment to decide which
alert to investigate first.
When triaging security alerts, prioritize alerts based on the alert severity by addressing
alerts with higher severity first.
Investigate a security alert
When you've decided which alert to investigate first:

1. Select the desired alert.
2. From the alert overview page, select the resource to investigate first.
3. Begin your investigation from the left pane, which shows the high-level information about the
security alert.
4. For more detailed information that can help you investigate the suspicious activity, examine
the Alert details tab.
5. When you've reviewed the information on this page, you may have enough to proceed with a
response. If you need further details:
Respond to a security alert

1. Open the Take action tab to see the recommended responses.
2. Review the Mitigate the threat section for the manual investigation steps necessary to mitigate the
issue.
3. To harden your resources and prevent future attacks of this kind, remediate the security
recommendations in the Prevent future attacks section.
4. To trigger a logic app with automated response steps, use the Trigger automated response section.
5. If the detected activity isn’t malicious, you can suppress future alerts of this kind using
the Suppress similar alerts section.
6. When you've completed the investigation into the alert and responded in the appropriate way,
change the status to Dismissed.
7. We encourage you to provide feedback about the alert to Microsoft.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/tutorial-security-incident
Manage security incidents
Triaging and investigating security alerts can be time consuming for even the most skilled se-
curity analysts. For many, it's hard to know where to begin.
Defender for Cloud uses analytics to connect the information between distinct security alerts.
Using these connections, Defender for Cloud can provide a single view of an attack campaign
and its related alerts to help you understand the attacker's actions and the affected resources.
What is a security incident?
In Defender for Cloud, a security incident is an aggregation of all alerts for a resource that align
with kill chain patterns. Incidents appear in the Security alerts page. Select an incident to view
the related alerts and get more information.
Managing security incidents
1. On Defender for Cloud's alerts page, use the Add filter button to filter by alert name to the
alert name Security incident detected on multiple resources.
2. To view details of an incident, select one from the list. A side pane appears with more de-
tails about the incident.
3. To view more details, select View full details.
To switch to the Take action tab, select the tab or the button on the bottom of the right pane.
Use this tab to take further actions such as:
• Mitigate the threat - provides manual remediation steps for this security incident
• Prevent future attacks - provides security recommendations to help reduce the attack
surface, increase security posture, and prevent future attacks
• Trigger automated response - provides the option to trigger a Logic App as a response
to this security incident
• Suppress similar alerts - provides the option to suppress future alerts with similar char-
acteristics if the alert isn’t relevant for your organization
4. To remediate the threats in the incident, follow the remediation steps provided with each
alert.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/incidents
Analyze Microsoft Defender for Cloud threat intelligence
Defender for Cloud's threat protection works by monitoring security information from your
Azure resources, the network, and connected partner solutions. It analyzes this information,
often correlating information from multiple sources, to identify threats.
When Defender for Cloud identifies a threat, it triggers a security alert, which contains detailed
information regarding the event, including suggestions for remediation. To help incident
response teams investigate and remediate threats, Defender for Cloud provides threat
intelligence reports containing information about detected threats. The report includes
information such as:
• Attacker’s identity or associations (if this information is available)

• Attackers’ objectives
• Current and historical attack campaigns (if this information is available)
• Attackers’ tactics, tools, and procedures
• Associated indicators of compromise (IoC) such as URLs and file hashes
• Victimology, which is the industry and geographic prevalence to assist you in
determining if your Azure resources are at risk
• Mitigation and remediation information
Defender for Cloud has three types of threat reports, which can vary according to the attack.
The reports available are:
• Activity Group Report: provides deep dives into attackers, their objectives, and tactics.
• Campaign Report: focuses on details of specific attack campaigns.
• Threat Summary Report: covers all of the items in the previous two reports.
This type of information is useful during the incident response process, where there's an
ongoing investigation to understand the source of the attack, the attacker’s motivations, and
what to do to mitigate this issue in the future.
https://docs.microsoft.com/en-us/azure/defender-for-cloud/threat-intelligence-reports
Respond to Microsoft Defender for Cloud for Key Vault alerts
When you receive an alert from Microsoft Defender for Key Vault, we recommend you
investigate and respond to the alert as described below. Microsoft Defender for Key Vault
protects applications and credentials, so even if you're familiar with the application or user
that triggered the alert, it's important to verify the situation surrounding every alert.
Alerts from Microsoft Defender for Key Vault includes these elements:
• Object ID
• User Principal Name or IP address of the suspicious resource
Depending on the type of access that occurred, some fields might not be available. For
example, if your key vault was accessed by an application, you won't see an associated User
Principal Name. If the traffic originated from outside of Azure, you won't see an Object ID.
Step 1. Identify the source

Step 2. Respond accordingly
Step 3. Measure the impact
Step 4. Take action
Manage user data discovered during an investigation
Searching for and identifying personal data

A Defender for Cloud user can view their personal data through the Azure portal. Defender for
Cloud only stores security contact details such as email addresses and phone numbers.
In the Azure portal, a user can view allowed IP configurations using Defender for Cloud's just-
in-time VM access feature and a user can view security alerts provided by Defender for Cloud
including IP addresses and attacker details
Classifying personal data
You don't need to classify personal data found in Defender for Cloud's security contact
feature. The data saved is an email address (or multiple email addresses) and a phone
number. Contact data is validated by Defender for Cloud.
You don't need to classify the IP addresses and port numbers saved by Defender for
Cloud's just-in-time feature.
Only a user assigned the role of Administrator can classify personal data by viewing alerts in
Defender for Cloud.
Securing and controlling access to personal data

A Defender for Cloud user assigned the role of Reader, Owner, Contributor, or Account
Administrator can access security contact data, can access their just-in-time policies and can
view their alerts.
Updating personal data

A Defender for Cloud user assigned the role of Owner, Contributor, or Account Administrator
can update security contact data via the Azure portal and can update their just-in-time
policies.
An Account Administrator can't edit alert incidents. An alert incident is considered security
data and is read only.
Deleting personal data

A Defender for Cloud user assigned the role of Owner, Contributor, or Account Administrator
can delete security contact data and the just-in-time policies via the Azure portal.
A Defender for Cloud user can't delete alert incidents. For security reasons, an alert incident is
considered read-only data.
Exporting personal data
A Defender for Cloud user assigned the role of Reader, Owner, Contributor, or Account
Administrator can export security contact data by:
- Copying from the Azure portal
- Executing the Azure REST API call, GET HTTP:
A Defender for Cloud user assigned the role of Account Administrator can export the just-in-
time policies containing the IP addresses by:
An Account Administrator can export the alert details by:

https://docs.microsoft.com/en-us/azure/defender-for-cloud/privacy
Mitigate threats using Microsoft Sentinel (40-45%)
Design and configure an Microsoft Sentinel Workspace
Plan a Microsoft Sentinel Workspace
Use the Log Analytics workspaces menu to create a Log Analytics workspace in the Azure
portal. Log Analytics workspace is the environment for Azure Monitor log data. Each
workspace has its own data repository and configuration, and data sources and solutions are
configured to store their data in a particular workspace. A workspace has unique workspace ID
and resource ID. You can reuse the same workspace name when in different resource groups.
You require a Log Analytics workspace if you intend on collecting data from the following
sources:
• Azure resources in your subscription

• On-premises computers monitored by System Center Operations Manager
• Device collections from Configuration Manager
• Diagnostics or log data from Azure storage
https://docs.microsoft.com/en-us/azure/azure-monitor/logs/quick-create-workspace
Azure Monitor stores log data in a Log Analytics workspace, which is an Azure resource and a
container where data is collected, aggregated, and serves as an administrative boundary.
While you can deploy one or more workspaces in your Azure subscription, there are several
considerations you should understand in order to ensure your initial deployment is following
our guidelines to provide you with a cost effective, manageable, and scalable deployment
meeting your organization's needs.
Data in a workspace is organized into tables, each of which stores different kinds of data and
has its own unique set of properties based on the resource generating the data. Most data
sources will write to their own tables in a Log Analytics workspace.
A Log Analytics workspace provides:
• A geographic location for data storage.

• Data isolation by granting different users access rights following one of our recommended
design strategies.
Scope for configuration of settings like pricing tier, retention, and data capping.
Workspaces are hosted on physical clusters. By default, the system is creating and managing
these clusters. Customers that ingest more than 4TB/day are expected to create their own
dedicated clusters for their workspaces - it enables them better control and higher ingestion
rate.
https://docs.microsoft.com/en-us/azure/azure-monitor/logs/design-logs-deployment
Configure Microsoft Sentinel roles
Microsoft Sentinel uses Azure role-based access control (Azure RBAC) to provide built-in
roles that can be assigned to users, groups, and services in Azure.
Use Azure RBAC to create and assign roles within your security operations team to grant
appropriate access to Microsoft Sentinel. The different roles give you fine-grained control over
what users of Microsoft Sentinel can see and do. Azure roles can be assigned in the Microsoft
Sentinel workspace directly (see note below), or in a subscription or resource group that the
workspace belongs to, which Microsoft Sentinel will inherit.
Microsoft Sentinel-specific roles

All Microsoft Sentinel built-in roles grant read access to the data in your Microsoft Sentinel
workspace.
• Microsoft Sentinel Reader can view data, incidents, workbooks, and other Microsoft
Sentinel resources.
• Microsoft Sentinel Responder can, in addition to the above, manage incidents (assign,
dismiss, etc.)
• Microsoft Sentinel Contributor can, in addition to the above, create and edit
workbooks, analytics rules, and other Microsoft Sentinel resources.
• Microsoft Sentinel Automation Contributor allows Microsoft Sentinel to add playbooks
to automation rules. It is not meant for user accounts.
Additional roles and permissions

Users with particular job requirements may need to be assigned additional roles or specific
permissions in order to accomplish their tasks.
• Working with playbooks to automate responses to threats

• Connecting data sources to Microsoft Sentinel
• Guest users assigning incidents
• Creating and deleting workbooks
Other roles you might see assigned
Azure roles: Owner, Contributor, and Reader. Azure roles grant access across all your Azure
resources, including Log Analytics workspaces and Microsoft Sentinel resources.
Log Analytics roles: Log Analytics Contributor and Log Analytics Reader. Log Analytics roles
grant access to your Log Analytics workspaces.
For example, a user who is assigned the Microsoft Sentinel Reader role, but not the Microsoft
Sentinel Contributor role, will still be able to edit items in Microsoft Sentinel if assigned the
Azure-level Contributor role. Therefore, if you want to grant permissions to a user only in
Microsoft Sentinel, you should carefully remove this user’s prior permissions, making sure you
do not break any needed access to another resource.
https://docs.microsoft.com/en-us/azure/sentinel/roles
Design Microsoft Sentinel data storage
Azure Monitor Logs is designed to scale and support collecting, indexing, and storing massive
amounts of data per day from any source in your enterprise or deployed in Azure. Although
this might be a primary driver for your organization, cost-efficiency is ultimately the underlying
driver. To that end, it's important to understand that the cost of a Log Analytics workspace
isn't based only on the volume of data collected; it's also dependent on the selected plan, and
how long you stored data generated from your connected sources.
The default pricing for Log Analytics is a Pay-As-You-Go model that's based on ingested data
volume and, optionally, for longer data retention. Data volume is measured as the size of the
data that will be stored in GB (10^9 bytes). Each Log Analytics workspace is charged as a
separate service and contributes to the bill for your Azure subscription. The amount of data
ingestion can be considerable, depending on the following factors:
• The set of management solutions enabled and their configuration
• The number and type of monitored resources
• Type of data collected from each monitored resource
https://docs.microsoft.com/en-us/azure/azure-monitor/logs/manage-cost-storage
Configure security settings and access for Microsoft Sentinel
This security baseline applies guidance from the Azure Security Benchmark version 2.0 to
Microsoft Sentinel. The Azure Security Benchmark provides recommendations on how you can
secure your cloud solutions on Azure. The content is grouped by the security controls defined
by the Azure Security Benchmark and the related guidance applicable to Microsoft Sentinel.
Network Security
NS-1: Implement security for internal traffic
Identity Management
IM-1: Standardize Azure Active Directory as the central identity and authentication system
IM-3: Use Azure AD single sign-on (SSO) for application access
Privileged Access
PA-3: Review and reconcile user access regularly
PA-6: Use privileged access workstations
PA-7: Follow just enough administration (least privilege principle)
Data Protection
DP-4: Encrypt sensitive information in transit
DP-5: Encrypt sensitive data at rest
Asset Management
AM-1: Ensure security team has visibility into risks for assets
AM-2: Ensure security team has access to asset inventory and metadata
AM-3: Use only approved Azure services
https://docs.microsoft.com/en-us/security/benchmark/azure/baselines/sentinel-security-
baseline
Plan and Implement the use of Data Connectors for Ingestion of Data
Sources in Microsoft Sentinel
Identify data sources to be ingested for Microsoft Sentinel
After onboarding Microsoft Sentinel into your workspace, connect data sources to start
ingesting your data into Microsoft Sentinel. Microsoft Sentinel comes with many
connectors for Microsoft products, available out of the box and providing real-time
integration. For example, service-to-service connectors include Microsoft 365 Defender
connectors and Microsoft 365 sources, such as Office 365, Azure Active Directory (Azure
AD), Microsoft Defender for Identity, and Microsoft Defender for Cloud Apps.
You can also enable out-of-the-box connectors to the broader security ecosystem for
non-Microsoft products. For example, you can use Syslog, Common Event Format
(CEF), or REST APIs to connect your data sources with Microsoft Sentinel.
The Data connectors page, accessible from the Microsoft Sentinel navigation menu,
shows the full list of connectors that Microsoft Sentinel provides, and their status in
your workspace. Select the connector you want to connect, and then select Open
connector page.
Identify the prerequisites for a data connector
The Data connectors page, accessible from the Microsoft Sentinel navigation menu,
shows the full list of connectors that Microsoft Sentinel provides, and their status.
Select the connector you want to connect, and then select Open connector page.
You'll need to have fulfilled all the prerequisites, and you'll see complete instructions
on the connector page to ingest the data to Microsoft Sentinel. It may take some time
for data to start arriving. After you connect, you see a summary of the data in the Data
received graph, and the connectivity status of the data types.
In the Next steps tab, you'll see additional content that Microsoft Sentinel provides for
the specific data type - sample queries, visualization workbooks, and analytics rule
templates to help you detect and investigate threats.
https://docs.microsoft.com/en-us/azure/sentinel/connect-data-sources
Configure and use Microsoft Sentinel data connectors
Microsoft Sentinel provides a wide range of built-in connectors for Azure services and
external solutions, and also supports ingesting data from some sources without a
dedicated connector.
If you're unable to connect your data source to Microsoft Sentinel using any of the
existing solutions available, consider creating your own data source connector.
Custom connector methods

The following table compares essential details about each method for creating custom
connectors described in this article.
Method description Capability Serverless Complexity

Codeless Connector Platform (CCP)
Supports all capabilities Low; simple,
Best for less technical audiences to
Yes codeless devel-
create SaaS connectors using a con- available with the code.
opment
figuration file instead of advanced
Log Analytics Agent
Best for collecting files from on- File collection only No Low
premises and IaaS sources
Logstash No; re-
Best for on-premises and IaaS Available plugins, plus cus- quires a VM Low; supports
sources, any source for which a tom plugin, capabilities pro- many scenarios
or VM clus-
vide significant flexibility. with plugins
plugin is available, and organizations ter to run
Codeless programming al-
lows for limited flexibility,
without support for imple-
Logic Apps menting algorithms. Low; simple,
High cost; avoid for high-volume data Yes codeless devel-
Best for low-volume cloud sources If no available action already opment
supports your requirements,
creating a custom action
may add complexity.
Direct support for file collec-
tion.
PowerShell
Best for prototyping and periodic file PowerShell can be used to No Low
uploads collect more sources, but
will require coding and con-
figuring the script as a ser-
Log Analytics API Supports all capabilities Depends on
Best for ISVs implementing integra- the imple- High

available with the code.
tion, and for unique collection re- mentation
Azure Functions High; requires

Supports all capabilities
Best for high-volume cloud sources, Yes programming
available with the code.
and for unique collection require- knowledge
https://docs.microsoft.com/en-us/azure/sentinel/create-custom-connector
Configure data connectors by using Azure Policy
The configuration of some connectors of this type is managed by Azure Policy. Select
the Azure Policy tab below for instructions. For the other connectors of this type, select
the Standalone tab.
Prerequisites
To ingest data into Microsoft Sentinel:
• You must have read and write permissions on the Microsoft Sentinel workspace.
• To use Azure Policy to apply a log streaming policy to your resources, you must have the
Owner role for the policy assignment scope.
Instructions
Connectors of this type use Azure Policy to apply a single diagnostic settings configuration to a
collection of resources of a single type, defined as a scope. You can see the log types ingested
from a given resource type on the left side of the connector page for that resource,
under Data types.
1. From the Microsoft Sentinel navigation menu, select Data connectors.

2. Select your resource type from the data connectors gallery, and then select Open
Connector Page on the preview pane.
3. In the Configuration section of the connector page, expand any expanders you see there
and select the Launch Azure Policy Assignment wizard button.
The policy assignment wizard opens, ready to create a new policy, with a policy name pre-
populated.
a. In the Basics tab, select the button with the three dots under Scope to choose your
subscription (and, optionally, a resource group). You can also add a description.
b. In the Parameters tab:
• Clear the Only show parameters that require input check box.
• If you see Effect and Setting name fields, leave them as is.
• Choose your Microsoft Sentinel workspace from the Log Analytics workspace drop-down list.
• The remaining drop-down fields represent the available diagnostic log types. Leave marked as
“True” all the log types you want to ingest.
c. The policy will be applied to resources added in the future. To apply the policy on your
existing resources as well, select the Remediation tab and mark the Create a remediation
task check box.
d. In the Review + create tab, click Create. Your policy is now assigned to the scope you
chose.
https://docs.microsoft.com/en-us/azure/sentinel/connect-azure-windows-microsoft-services
Design and configure Syslog and CEF event collections
Syslog is an event logging protocol that is common to Linux. You can use the Syslog daemon
built into Linux devices and appliances to collect local events of the types you specify, and
have it send those events to Microsoft Sentinel using the Log Analytics agent for
Linux (formerly known as the OMS agent).
Architecture
When the Log Analytics agent is installed on your VM or appliance, the installation script
configures the local Syslog daemon to forward messages to the agent on UDP port 25224.
After receiving the messages, the agent sends them to your Log Analytics workspace over
HTTPS, where they are ingested into the Syslog table in Microsoft Sentinel > Logs.
For some device types that don't allow local installation of the Log Analytics agent, the agent
can be installed instead on a dedicated Linux-based log forwarder. The originating device must
be configured to send Syslog events to the Syslog daemon on this forwarder instead of the
local daemon. The Syslog daemon on the forwarder sends events to the Log Analytics agent
over UDP. If this Linux forwarder is expected to collect a high volume of Syslog events, its
Syslog daemon sends events to the agent over TCP instead. In either case, the agent then
sends the events from there to your Log Analytics workspace in Microsoft Sentinel.
•
There are three steps to configuring Syslog collection:
• Configure your Linux device or appliance. This refers to the device on which the Log Ana-
lytics agent will be installed, whether it is the same device that originates the events or a log
collector that will forward them.
• Configure your application's logging settings corresponding to the location of the Syslog
daemon that will be sending events to the agent.
• Configure the Log Analytics agent itself. This is done from within Microsoft Sentinel, and
the configuration is sent to all installed agents.
https://docs.microsoft.com/en-us/azure/sentinel/connect-syslog
Design and Configure Windows Security events collections
Microsoft Sentinel can apply machine learning (ML) to Security events data to identify anoma-
lous Remote Desktop Protocol (RDP) login activity. Scenarios include:
• Unusual IP - the IP address has rarely or never been observed in the last 30 days
• Unusual geo-location - the IP address, city, country, and ASN have rarely or never been
observed in the last 30 days
• New user - a new user logs in from an IP address and geo-location, both or either of which
were not expected to be seen based on data from the 30 days prior.
Configuration instructions
1. You must be collecting RDP login data (Event ID 4624) through the Security
events or Windows Security Events data connectors. Make sure you have selected
an event set besides "None", or created a data collection rule that includes this event ID,
to stream into Microsoft Sentinel.
2. From the Microsoft Sentinel portal, select Analytics, and then select the Rule tem-
plates tab. Choose the (Preview) Anomalous RDP Login Detection rule, and move
the Status slider to Enabled.
https://docs.microsoft.com/en-us/azure/sentinel/data-connectors-reference#windows-
security-events-via-ama
Configure custom threat intelligence connectors
Many organizations use threat intelligence platform (TIP) solutions to aggregate threat
indicator feeds from a variety of sources, to curate the data within the platform, and then to
choose which threat indicators to apply to various security solutions such as network devices,
EDR/XDR solutions, or SIEMs such as Microsoft Sentinel. The Threat Intelligence Platforms data
connector allows you to use these solutions to import threat indicators into Microsoft
Sentinel.
Because the TIP data connector works with the Microsoft Graph Security tiIndicators API to
accomplish this, you can use the connector to send indicators to Microsoft Sentinel (and to
other Microsoft security solutions like Microsoft 365 Defender) from any other custom threat
intelligence platform that can communicate with that API.
Follow these steps to import threat indicators to Microsoft Sentinel from your integrated TIP
or custom threat intelligence solution:
1. Obtain an Application ID and Client Secret from your Azure Active Directory
2. Input this information into your TIP solution or custom application
3. Enable the Threat Intelligence Platforms data connector in Microsoft Sentinel
https://docs.microsoft.com/en-us/azure/sentinel/connect-threat-intelligence-ti
Microsoft Sentinel provides a wide range of built-in connectors for Azure services and external
solutions, and also supports ingesting data from some sources without a dedicated connector.
If you're unable to connect your data source to Microsoft Sentinel using any of the existing
solutions available, consider creating your own data source connector.
Custom Connector Methods
Codeless Connector Platform (CCP)
• Log Analytics Agent

• Logstash
• Logic Apps
• PowerShell
• Log Analytics API
• Azure Functions
https://docs.microsoft.com/en-us/azure/sentinel/create-custom-connector
Create custom logs in Azure Log Analytics to store custom data
Azure Monitor stores log data in a Log Analytics workspace, which is an Azure resource
and a container where data is collected, aggregated, and serves as an administrative
boundary. While you can deploy one or more workspaces in your Azure subscription,
there are several considerations you should understand in order to ensure your initial
deployment is following our guidelines to provide you with a cost effective,
manageable, and scalable deployment meeting your organization's needs.
Data in a workspace is organized into tables, each of which stores different kinds of
data and has its own unique set of properties based on the resource generating the
data. Most data sources will write to their own tables in a Log Analytics workspace.
A Log Analytics workspace provides:
• A geographic location for data storage.

• Data isolation by granting different users access rights following one of our
recommended design strategies.
• Scope for configuration of settings like pricing tier, retention, and data capping.
Workspaces are hosted on physical clusters. By default, the system is creating and managing
these clusters. Customers that ingest more than 4TB/day are expected to create their own
dedicated clusters for their workspaces - it enables them better control and higher ingestion
rate.
This article provides a detailed overview of the design and migration considerations, access
control overview, and an understanding of the design implementations we recommend for
your IT organization.
https://docs.microsoft.com/en-us/azure/azure-monitor/logs/design-logs-deployment
Manage Microsoft Sentinel analytics rules
Design and configure analytics rules
After you've connected your data sources to Microsoft Sentinel, you'll want to be notified
when something suspicious occurs. That's why Microsoft Sentinel provides out-of-the-box,
built-in templates to help you create threat detection rules.
Use built-in analytics rules

This procedure describes how to use built-in analytics rules templates.
To use built-in analytics rules:
1.In the Microsoft Sentinel > Analytics > Rule templates page, select a template name, and
then select the Create rule button on the details pane to create a new active rule based on
that template.
Each template has a list of required data sources. When you open the template, the data
sources are automatically checked for availability. If there is an availability issue,
the Create rule button may be disabled, or you may see a warning to that effect.
2.Selecting Create rule opens the rule creation wizard based on the selected template. All
the details are autofilled, and with the Scheduled or Microsoft security templates, you can
customize the logic and other rule settings to better suit your specific needs. You can
repeat this process to create additional rules based on the built-in template. After
following the steps in the rule creation wizard to the end, you will have finished creating a
rule based on the template. The new rules will appear in the Active rules tab.
https://docs.microsoft.com/en-us/azure/sentinel/detect-threats-built-in
Create custom analytics rules to detect threats
After connecting your data sources to Microsoft Sentinel, create custom analytics rules to help
discover threats and anomalous behaviors in your environment.
Analytics rules search for specific events or sets of events across your environment, alert you
when certain event thresholds or conditions are reached, generate incidents for your SOC to
triage and investigate, and respond to threats with automated tracking and remediation
processes.
✓ Create analytics rules
✓ Define how events and alerts are processed
✓ Define how alerts and incidents are generated
✓ Choose automated threat responses for your rules
Create a custom analytics rule with a scheduled query
From the Microsoft Sentinel navigation menu, select Analytics.
In the action bar at the top, select +Create and select Scheduled query rule. This opens
the Analytics rule wizard.
• Provide a unique Name and a Description.

• In the Tactics and techniques field, you can choose from among categories of attacks by
which to classify the rule. These are based on the tactics and techniques of the MITRE
ATT&CK framework.
• Incidents created from alerts that are detected by rules mapped to MITRE ATT&CK
tactics and techniques automatically inherit the rule's mapping.
• Set the alert Severity as appropriate.
• When you create the rule, its Status is Enabled by default, which means it will run
immediately after you finish creating it. If you don’t want it to run immediately,
select Disabled, and the rule will be added to your Active rules tab and you can enable it
from there when you need it.
https://docs.microsoft.com/en-us/azure/sentinel/detect-threats-custom
Define incident creation logic
To view all analytics rules and detections in Microsoft Sentinel, go to Analytics > Rule tem-
plates. This tab contains all the Microsoft Sentinel built-in rules. The alerts generated by these
rules will create incidents that you can assign and investigate in your environment.
Rule type Description
Microsoft security Microsoft security templates automatically create Microsoft Sentinel

incidents from the alerts generated in other Microsoft security solu-
tions, in real time. You can use Microsoft security rules as a template to
create new rules with similar logic.
Fusion Microsoft Sentinel uses the Fusion correlation engine, with its scalable
(some detections in machine learning algorithms, to detect advanced multistage attacks by
Preview) correlating many low-fidelity alerts and events across multiple prod-
ucts into high-fidelity and actionable incidents. Fusion is enabled by
default. Because the logic is hidden and therefore not customizable,
you can only create one rule with this template..
Machine learning ML behavioral analytics templates are based on proprietary Microsoft

(ML) behavioral machine learning algorithms, so you cannot see the internal logic of
analytics how they work and when they run.
Because the logic is hidden and therefore not customizable, you can
only create one rule with each template of this type.
Anomaly Anomaly rule templates use machine learning to detect specific types
(Preview) of anomalous behavior. Each rule has its own unique parameters and
thresholds, appropriate to the behavior being analyzed.
While the configurations of out-of-the-box rules can't be changed or

fine-tuned, you can duplicate a rule and then change and fine-tune the
duplicate. In such cases, run the duplicate in Flighting mode and the
original concurrently in Production mode. Then compare results, and
switch the duplicate to Production if and when its fine-tuning is to your
liking.
Scheduled Scheduled analytics rules are based on built-in queries written by Microsoft
security experts. You can see the query logic and make changes to it. You
can use the scheduled rules template and customize the query logic and
scheduling settings to create new rules.
Several new scheduled analytics rule templates produce alerts that are cor-
related by the Fusion engine with alerts from other systems to produce
high-fidelity incidents.
We recommend being mindful of when you enable a new or edited ana-

lytics rule to ensure that the rules will get the new stack of incidents in
time. For example, you might want to run a rule in synch with when your
SOC analysts begin their workday, and enable the rules then.
Near-real-time NRT rules are limited set of scheduled rules, designed to run once every
(NRT) minute, in order to supply you with information as up-to-the-minute as
(Preview) possible.
They function mostly like scheduled rules and are configured similarly, with
some limitations.
https://docs.microsoft.com/en-us/azure/sentinel/detect-threats-built-in
Configure Security Orchestration Automation and Response (SOAR) in

Microsoft Sentinel
Create Microsoft Sentinel playbooks
A playbook is a collection of these remediation actions that can be run from Microsoft Sentinel
as a routine. A playbook can help automate and orchestrate your threat response; it can be
run manually or set to run automatically in response to specific alerts or incidents, when
triggered by an analytics rule or an automation rule, respectively.
For example, if an account and machine are compromised, a playbook can isolate the machine
from the network and block the account by the time the SOC team is notified of the incident.
Playbooks can be used within the subscription to which they belong, but the Playbooks tab (in
the Automation blade) displays all the playbooks available across any selected subscriptions.
A playbook template is a pre-built, tested, and ready-to-use workflow that can be customized
to meet your needs. Templates can also serve as a reference for best practices when
developing playbooks from scratch, or as inspiration for new automation scenarios.
Playbook templates are not active playbooks themselves, until you create a playbook (an
editable copy of the template) from them.
You can get playbook templates from the following sources:
• The Playbook templates tab (under Automation) presents the leading scenarios
contributed by the Microsoft Sentinel community. Multiple active playbooks can be
created from the same template.
• When a new version of the template is published, the active playbooks created from that
template (in the Playbooks tab) will be labeled with a notification that an update is
available.
• Playbook templates can also be obtained as part of a Microsoft Sentinel solution in the
context of a specific product. The deployment of the solution produces active playbooks.
• The Microsoft Sentinel GitHub repository contains many playbook templates. They can be
deployed to an Azure subscription by selecting the Deploy to Azure button.
Technically, a playbook template is an ARM template which consists of several resources: an

Azure Logic Apps workflow and API connections for each connection involved.
https://docs.microsoft.com/en-us/azure/sentinel/automate-responses-with-playbooks
Configure rules and incidents to trigger playbooks
Playbooks can be run either manually or automatically.
Running them manually means that when you get an alert, you can choose to run a
playbook on-demand as a response to the selected alert. Currently this feature is
generally available for alerts, and in preview for incidents.
Running them automatically means to set them as an automated response in an

analytics rule (for alerts), or as an action in an automation rule (for incidents)
Set an automated response
Security operations teams can significantly reduce their workload by fully automating the
routine responses to recurring types of incidents and alerts, allowing you to concentrate more
on unique incidents and alerts, analyzing patterns, threat hunting, and more.
Setting automated response means that every time an analytics rule is triggered, in addition
to creating an alert, the rule will run a playbook, which will receive as an input the alert
created by the rule.
If the alert creates an incident, the incident will trigger an automation rule which may in turn
run a playbook, which will receive as an input the incident created by the alert.
Alert creation automated response
For playbooks that are triggered by alert creation and receive alerts as their inputs (their first
step is “When a Microsoft Sentinel Alert is triggered”), attach the playbook to an analytics
rule:
1. Edit the analytics rule that generates the alert you want to define an automated response
for.
2. Under Alert automation in the Automated response tab, select the playbook or playbooks
that this analytics rule will trigger when an alert is created.
Incident creation automated response
For playbooks that are triggered by incident creation and receive incidents as their inputs
(their first step is “When a Microsoft Sentinel Incident is triggered”), create an automation
rule and define a Run playbook action in it. This can be done in 2 ways:
Edit the analytics rule that generates the incident you want to define an automated response
for. Under Incident automation in the Automated response tab, create an automation rule.
This will create a automated response only for this analytics rule.
From the Automation rules tab in the Automation blade, create a new automation rule and
specify the appropriate conditions and desired actions. This automation rule will be applied to
any analytics rule that fulfills the specified conditions.
https://docs.microsoft.com/en-us/azure/sentinel/automate-responses-with-playbooks
PAGE 61
68 Exam SC-200 Microsoft
Microsoft Security
Security Operations
Operations Analyst
Use playbooks to remediate threats
Playbooks are collections of procedures that can be run from Microsoft Sentinel in
response to an alert or incident. A playbook can help automate and orchestrate your
response, and can be set to run automatically when specific alerts or incidents are generated,
by being attached to an analytics rule or an automation rule, respectively. It can also be run
manually on-demand.
Playbooks in Microsoft Sentinel are based on workflows built in Azure Logic Apps,
which means that you get all the power, customizability, and built-in templates of Logic Apps.
Each playbook is created for the specific subscription to which it belongs, but
the Playbooks display shows you all the playbooks available across any selected subscriptions.
For example, if you want to stop potentially compromised users from moving around
your network and stealing information, you can create an automated, multifaceted response
to incidents generated by rules that detect compromised users. You start by creating a
playbook that takes the following actions:
1. When the playbook is called by an automation rule passing it an incident, the playbook
opens a ticket in ServiceNow or any other IT ticketing system.
2. It sends a message to your security operations channel in Microsoft Teams or Slack to
make sure your security analysts are aware of the incident.
3. It also sends all the information in the incident in an email message to your senior
network admin and security admin. The email message will include Block and Ignore user
option buttons.
4. The playbook waits until a response is received from the admins, then continues with its
next steps.
5. If the admins choose Block, it sends a command to Azure AD to disable the user, and one
to the firewall to block the IP address.
6. If the admins choose Ignore, the playbook closes the incident in Microsoft Sentinel, and
the ticket in ServiceNow.
In order to trigger the playbook, you'll then create an automation rule that runs when these
incidents are generated. That rule will take these steps:
1. The rule changes the incident status to Active.
2. It assigns the incident to the analyst tasked with managing this type of incident.
3. It adds the "compromised user" tag.
4. Finally, it calls the playbook you just created. (Special permissions are required for this
step.)
https://docs.microsoft.com/en-us/azure/sentinel/tutorial-respond-threats-playbook
Use playbooks to manage incidents
You use a playbook to respond to an incident by creating an automation rule that will run
when the incident is generated, and in turn it will call the playbook.
To create an automation rule:
1. From the Automation blade in the Microsoft Sentinel navigation menu,

select Create from the top menu and then Add new rule.
2. The Create new automation rule panel opens. Enter a name for your rule.
3. If you want the automation rule to take effect only on certain analytics rules, specify
which ones by modifying the If Analytics rule name condition.
4. Add any other conditions you want this automation rule's activation to depend on.
Click Add condition and choose conditions from the drop-down list. The list of
conditions is populated by alert detail and entity identifier fields.
5. Choose the actions you want this automation rule to take. Available actions
include Assign owner, Change status, Change severity, Add tags, and Run playbook.
You can add as many actions as you like.
6. If you add a Run playbook action, you will be prompted to choose from the drop-down
list of available playbooks. Only playbooks that start with the incident trigger can be run
from automation rules, so only they will appear in the list.
7. Set an expiration date for your automation rule if you want it to have one.
8. Enter a number under Order to determine where in the sequence of automation rules
this rule will run.
9. Click Apply. You're done!
https://docs.microsoft.com/en-us/azure/sentinel/tutorial-respond-threats-playbook
Use playbooks across Microsoft Defender solutions
Microsoft Sentinel's Microsoft 365 Defender incident integration allows you to stream all
Microsoft 365 Defender incidents into Microsoft Sentinel and keep them synchronized
between both portals. Incidents from Microsoft 365 Defender (formerly known as Microsoft
Threat Protection or MTP) include all associated alerts, entities, and relevant information,
providing you with enough context to perform triage and preliminary investigation in
Microsoft Sentinel. Once in Sentinel, incidents will remain bi-directionally synced with
Microsoft 365 Defender, allowing you to take advantage of the benefits of both portals in your
incident investigation.
PAGE 61
Microsoft Security
Security Operations
Operations Analyst
This integration gives Microsoft 365 security incidents the visibility to be managed from within
Microsoft Sentinel, as part of the primary incident queue across the entire organization, so you
can see – and correlate – Microsoft 365 incidents together with those from all of your other
cloud and on-premises systems. At the same time, it allows you to take advantage of the
unique strengths and capabilities of Microsoft 365 Defender for in-depth investigations and a
Microsoft 365-specific experience across the Microsoft 365 ecosystem. Microsoft 365
Defender enriches and groups alerts from multiple Microsoft 365 products, both reducing the
size of the SOC’s incident queue and shortening the time to resolve. The component services
that are part of the Microsoft 365 Defender stack are:
• Microsoft Defender for Endpoint (formerly Microsoft Defender ATP)

• Microsoft Defender for Identity (formerly Azure ATP)
• Microsoft Defender for Office 365 (formerly Office 365 ATP)
• Microsoft Defender for Cloud Apps (formerly Microsoft Cloud App Security)
In addition to collecting alerts from these components, Microsoft 365 Defender generates
alerts of its own. It creates incidents from all of these alerts and sends them to Microsoft
Sentinel.
https://docs.microsoft.com/en-us/azure/sentinel/microsoft-365-defender-sentinel-integration
Manage Microsoft Sentinel Incidents
Investigate incidents in Microsoft Sentinel
This article helps you investigate incidents with Microsoft Sentinel. After you connected your
data sources to Microsoft Sentinel, you want to be notified when something suspicious
happens. To enable you to do this, Microsoft Sentinel lets you create advanced alert rules, that
generate incidents that you can assign and investigate.
This article covers:
✓ Investigate incidents
✓ Use the investigation graph
✓Respond to threats
An incident can include multiple alerts. It's an aggregation of all the relevant evidence for a
PAGE 61
Microsoft Security
Security Operations
Operations Analyst
specific investigation. An incident is created based on analytics rules that you created in
the Analytics page. The properties related to the alerts, such as severity and status, are set at
the incident level. After you let Microsoft Sentinel know what kinds of threats you're looking
for and how to find them, you can monitor detected threats by investigating incidents.
How to investigate incidents
1. Select Incidents. The Incidents page lets you know how many incidents you have, how
many are open, how many you've set to In progress, and how many are closed. For each
incident, you can see the time it occurred, and the status of the incident. Look at the
severity to decide which incidents to handle first.
2. You can filter the incidents as needed, for example by status or severity. For more
information, see Search for incidents.
3. To begin an investigation, select a specific incident. On the right, you can see detailed
information for the incident including its severity, summary of the number of entities
involved, the raw events that triggered this incident, the incident’s unique ID, and any
mapped MITRE ATT&CK tactics or techniques.
4. To view more details about the alerts and entities in the incident, select View full details in
the incident page and review the relevant tabs that summarize the incident information.
5. If you're actively investigating an incident, it's a good idea to set the incident's status to In
progress until you close it.
6. Incidents can be assigned to a specific user. For each incident you can assign an owner, by
setting the Incident owner field. All incidents start as unassigned. You can also add
comments so that other analysts will be able to understand what you investigated and
what your concerns are around the incident.
7.Select Investigate to view the investigation map.
https://docs.microsoft.com/en-us/azure/sentinel/investigate-cases
Triage incidents in Microsoft Sentinel
As a Security Operations Center (SOC) manager, you need to have overall efficiency metrics
and measures at your fingertips to gauge the performance of your team. You'll want to see
incident operations over time by many different criteria, like severity, MITRE tactics, mean
time to triage, mean time to resolve, and more. Microsoft Sentinel now makes this data
available to you with the new Security Incident table and schema in Log Analytics and the
accompanying Security operations efficiency workbook. You'll be able to visualize your team's
performance over time and use this insight to improve efficiency. You can also write and use
your own KQL queries against the incident table to create customized workbooks that fit your
specific auditing needs and KPIs.
Respond to incidents in Microsoft Sentinel
Automation rules are a new concept in Microsoft Sentinel. This feature allows users to
centrally manage the automation of incident handling. Besides letting you assign playbooks to
incidents (not just to alerts as before), automation rules also allow you to automate responses
for multiple analytics rules at once, automatically tag, assign, or close incidents without the
need for playbooks, and control the order of actions that are executed. Automation rules will
streamline automation use in Microsoft Sentinel and will enable you to simplify complex
workflows for your incident orchestration processes.
Components
Automation rules are made up of several components:
Trigger
Automation rules are triggered by the creation of an incident.
To review – incidents are created from alerts by analytics rules, of which there are several
types, as explained in the tutorial Detect threats with built-in analytics rules in Microsoft
Sentinel.
Conditions
Complex sets of conditions can be defined to govern when actions (see below) should run.
These conditions are typically based on the states or values of attributes of incidents and their
entities, and they can include AND/OR/NOT/CONTAINS operators.
Actions
Actions can be defined to run when the conditions (see above) are met. You can define many
actions in a rule, and you can choose the order in which they’ll run (see below). The following
actions can be defined using automation rules, without the need for the advanced
functionality of a playbook:
• Changing the status of an incident, keeping your workflow up to date.

• When changing to “closed,” specifying the closing reason and adding a comment. This
helps you keep track of your performance and effectiveness, and fine-tune to reduce false
positives.
• Changing the severity of an incident – you can reevaluate and reprioritize based on the
presence, absence, values, or attributes of entities involved in the incident.
• Assigning an incident to an owner – this helps you direct types of incidents to the
personnel best suited to deal with them, or to the most available personnel.
• Adding a tag to an incident – this is useful for classifying incidents by subject, by attacker,
or by any other common denominator.
Also, you can define an action to run a playbook, in order to take more complex response
actions, including any that involve external systems. Only playbooks activated by the incident
trigger are available to be used in automation rules. You can define an action to include
multiple playbooks, or combinations of playbooks and other actions, and the order in which
they will run.
https://docs.microsoft.com/en-us/azure/sentinel/automate-incident-handling-with-
automation-rules
Investigate multi-workspace incidents
To take full advantage of Microsoft Sentinel’s capabilities, Microsoft recommends using a

single-workspace environment. However, there are some use cases that require having several
workspaces, in some cases – for example, that of a Managed Security Service Provider
(MSSP) and its customers – across multiple tenants. Multiple workspace view lets you see and
work with security incidents across several workspaces at the same time, even across tenants,
allowing you to maintain full visibility and control of your organization’s security
responsiveness.
Working with incidents
Multiple workspace view is currently available only for incidents. This page looks and functions
in most ways like the regular Incidents page, with the following important differences:
• The counters at the top of the page - Open incidents, New incidents, Active incidents, etc. -
show the numbers for all of the selected workspaces collectively.
• You'll see incidents from all of the selected workspaces and directories (tenants) in a single
unified list. You can filter the list by workspace and directory, in addition to the filters from
the regular Incidents screen.
• You'll need to have read and write permissions on all the workspaces from which you've
selected incidents. If you have only read permissions on some workspaces, you'll see
warning messages if you select incidents in those workspaces. You won't be able to modify
those incidents or any others you've selected together with those (even if you do have
permissions for the others).
• If you choose a single incident and click View full details or Actions > Investigate, you will
from then on be in the data context of that incident's workspace and no others.
Identify advanced threats with User and Entity Behavior Analytics (UEBA)
Identifying threats inside your organization and their potential impact - whether a
compromised entity or a malicious insider - has always been a time-consuming and
labor-intensive process. Sifting through alerts, connecting the dots, and active hunting
all add up to massive amounts of time and effort expended with minimal returns, and
the possibility of sophisticated threats simply evading discovery. Particularly elusive
threats like zero-day, targeted, and advanced persistent threats can be the most
dangerous to your organization, making their detection all the more critical.
The UEBA capability in Microsoft Sentinel eliminates the drudgery from your analysts’
workloads and the uncertainty from their efforts, and delivers high-fidelity, actionable
intelligence, so they can focus on investigation and remediation.
As Microsoft Sentinel collects logs and alerts from all of its connected data sources, it analyzes
them and builds baseline behavioral profiles of your organization’s entities (such as users,
hosts, IP addresses, and applications) across time and peer group horizon. Using a variety of
techniques and machine learning capabilities, Microsoft Sentinel can then identify anomalous
activity and help you determine if an asset has been compromised. Not only that, but it can
also figure out the relative sensitivity of particular assets, identify peer groups of assets, and
evaluate the potential impact of any given compromised asset (its “blast radius”). Armed with
this information, you can effectively prioritize your investigation and incident handling.
Security-driven analytics
Inspired by Gartner’s paradigm for UEBA solutions, Microsoft Sentinel provides an "outside-in"
approach, based on three frames of reference:
Use cases: By prioritizing for relevant attack vectors and scenarios based on security research
aligned with the MITRE ATT&CK framework of tactics, techniques, and sub-techniques that
puts various entities as victims, perpetrators, or pivot points in the kill chain; Microsoft
Sentinel focuses specifically on the most valuable logs each data source can provide.
Data Sources: While first and foremost supporting Azure data sources, Microsoft Sentinel
thoughtfully selects third-party data sources to provide data that matches our threat
scenarios.
Analytics: Using various machine learning (ML) algorithms, Microsoft Sentinel identifies
anomalous activities and presents evidence clearly and concisely in the form of contextual
enrichments, some examples of which appear below.
Microsoft Sentinel presents artifacts that help your security analysts get a clear understanding
of anomalous activities in context, and in comparison with the user's baseline profile. Actions
performed by a user (or a host, or an address) are evaluated contextually, where a "true"
outcome indicates an identified anomaly:
• across geographical locations, devices, and environments.
• across time and frequency horizons (compared to user's own history).
• as compared to peers' behavior.
• as compared to organization's behavior.
https://docs.microsoft.com/en-us/azure/sentinel/identify-threats-with-entity-behavior-
analytics
Use Microsoft Sentinel workbooks to analyze and interpret data
Activate and customize Microsoft Sentinel workbook templates
Use built-in workbooks

✓Go to Workbooks and then select Templates to see the full list of Microsoft
Sentinel built-in workbooks.
✓Select View template to see the template populated with your data.
✓To edit the workbook, select Save, and then select the location where you want
to save the JSON file for the template.
✓Select View saved workbook.
https://docs.microsoft.com/en-us/azure/sentinel/monitor-your-data
Create custom workbooks
Create new workbook

1. Go to Workbooks and then select Add workbook to create a new workbook from scratch.
2. To edit the workbook, select Edit, and then add text, queries, and parameters as
necessary. For more information on how to customize the workbook, see how to Create
interactive reports with Azure Monitor Workbooks.
3. When building a query, make sure the Data source is set to Logs and Resource type is set
to Log Analytics, and then choose the relevant workspace(s).
4. After you create your workbook, save the workbook, making sure you save it under the
subscription and resource group of your Microsoft Sentinel workspace.
5. If you want to let others in your organization use the workbook, under Save
to select Shared reports. If you want this workbook to be available only to you, select My
reports.
6. To switch between workbooks in your workspace, select Open in the toolbar of any
workbook. The screen switches to a list of other workbooks you can switch to.
Configure advanced visualizations
In this article, you will learn how to quickly be able to view and monitor what's happening
across your environment using Microsoft Sentinel. After you connected your data sources to
Microsoft Sentinel, you get instant visualization and analysis of data so that you can know
what's happening across all your connected data sources. Microsoft Sentinel gives you
workbooks that provide you with the full power of tools already available in Azure as well as
tables and charts that are built in to provide you with analytics for your logs and queries. You
can either use built-in workbooks or create a new workbook easily, from scratch or based on
an existing workbook.
To visualize and get analysis of what's happening on your environment, first, take a look at the
overview dashboard to get an idea of the security posture of your organization. You can click
on each element of these tiles to drill down to the raw data from which they are created. To
help you reduce noise and minimize the number of alerts you have to review and investigate,
Microsoft Sentinel uses a fusion technique to correlate alerts into incidents. Incidents are
groups of related alerts that together create an actionable incident that you can investigate
and resolve.
https://docs.microsoft.com/en-us/azure/sentinel/get-visibility
View and analyze Microsoft Sentinel data using workbooks
Once you have connected your data sources to Microsoft Sentinel, you can visualize and
monitor the data using the Microsoft Sentinel adoption of Azure Monitor Workbooks, which
provides versatility in creating custom dashboards. While the Workbooks are displayed
differently in Microsoft Sentinel, it may be useful for you to see how to create interactive
reports with Azure Monitor Workbooks. Microsoft Sentinel allows you to create custom
workbooks across your data, and also comes with built-in workbook templates to allow you to
quickly gain insights across your data as soon as you connect a data source.
This article describes how to visualize your data in Microsoft Sentinel.
✓ Use built-in workbooks

✓ Create new workbooks
Track incident metrics using the security operations efficiency workbook
To complement the SecurityIncidents table, we’ve provided you an out-of-the-box security

operations efficiency workbook template that you can use to monitor your SOC operations.
The workbook contains the following metrics:
✓ Incident created over time

✓ Incidents created by closing classification, severity, owner, and status
✓ Mean time to triage
✓ Mean time to closure
✓ Incidents created by severity, owner, status, product, and tactics over time
✓ Time to triage percentiles
✓ Time to closure percentiles
✓ Mean time to triage per owner
✓ Recent activities
✓Recent closing classifications
You can find this new workbook template by choosing Workbooks from the Microsoft Sentinel
navigation menu and selecting the Templates tab. Choose Security operations efficiency from
the gallery and click one of the View saved workbook and View template buttons.
https://docs.microsoft.com/en-us/azure/sentinel/manage-soc-with-incident-metrics
Hunt for threats using the Microsoft Sentinel portal
Create custom hunting queries
Create or modify a query and save it as your own query or share it with users who are in the
same tenant.
To create a new query:

1. Select New query.
2. Fill in all the blank fields and select Create.
a. Create entity mappings by selecting entity types, identifiers and columns.
b.Map MITRE ATT&CK techniques to your hunting queries by selecting the tactic,
technique and sub-technique (if applicable).
https://docs.microsoft.com/en-us/azure/sentinel/hunting
Run hunting queries manually
Kusto Query Language (KQL) is the query language used to perform analysis on data to create
Analytics, Workbooks, and perform Hunting in Microsoft Sentinel. Understanding basic KQL
statement structure provides the foundation to build more complex statements.
You are a Security Operations Analyst working at a company that is implementing Microsoft
Sentinel. You are responsible for performing log data analysis to search for malicious activity,
display visualizations, and perform threat hunting. To query log data, you use the Kusto Query
Language (KQL).
To learn to write KQL, you start with the basic structure of a KQL statement. The basics include
what table to query, how to apply a filter, and how to return specific columns.
The Query window has three primary sections:
• The left area is a reference list of the tables in the environment.

• The middle top area is the Query editor.
• The bottom area is the Query Results.
Before running a query, adjust the time range to scope the data. To change the result columns
displayed, select the Columns box, and choose the required columns.
https://docs.microsoft.com/en-us/learn/paths/sc-200-utilize-kql-for-azure-sentinel/
Monitor hunting queries by using Livestream
Use hunting livestream to create interactive sessions that let you test newly created queries as
events occur, get notifications from the sessions when a match is found, and launch
investigations if necessary. You can quickly create a livestream session using any Log Analytics
query.
• Test newly created queries as events occur
You can test and adjust queries without any conflicts to current rules that are being actively
applied to events. After you confirm these new queries work as expected, it's easy to promote
them to custom alert rules by selecting an option that elevates the session to an alert.
• Get notified when threats occur

You can compare threat data feeds to aggregated log data and be notified when a match
occurs. Threat data feeds are ongoing streams of data that are related to potential or current
threats, so the notification might indicate a potential threat to your organization. Create a
livestream session instead of a custom alert rule when you want to be notified of a potential
issue without the overheads of maintaining a custom alert rule.
• Launch investigations
If there is an active investigation that involves an asset such as a host or user, you can view
specific (or any) activity in the log data as it occurs on that asset. You can be notified when
that activity occurs.
https://docs.microsoft.com/en-us/azure/sentinel/livestream
Perform advanced hunting with notebooks
The foundation of Microsoft Sentinel is the data store; it combines high-performance

querying, dynamic schema, and scales to massive data volumes. The Azure portal and all
Microsoft Sentinel tools use a common API to access this data store.
The same API is also available for external tools such as Jupyter notebooks and Python. While
many common tasks can be carried out in the portal, Jupyter extends the scope of what you
can do with this data. It combines full programmability with a huge collection of libraries for
machine learning, visualization, and data analysis. These attributes make Jupyter a compelling
tool for security investigation and hunting.
For example, use notebooks to:
• Perform analytics that aren't provided out-of-the box in Microsoft Sentinel, such as some
Python machine learning features
• Create data visualizations that aren't provided out-of-the box in Microsoft Sentinel, such as
custom timelines and process trees
• Integrate data sources outside of Microsoft Sentinel, such as an on-premises data set.
https://docs.microsoft.com/en-us/azure/sentinel/notebooks
Track query results with bookmarks
If you find something that urgently needs to be addressed while hunting in your logs, you can
easily create a bookmark and either promote it to an incident or add it to an existing incident.
For more information about incidents, see Investigate incidents with Microsoft Sentinel.
If you found something worth bookmarking, but that isn't immediately urgent, you can create
a bookmark and then revisit your bookmarked data at any time on the Bookmarks tab of
the Hunting pane. You can use filtering and search options to quickly find specific data for your
current investigation.
You can visualize your bookmarked data by selecting Investigate from the bookmark details.
This launches the investigation experience in which you can view, investigate, and visually
communicate your findings using an interactive entity-graph diagram and timeline.
https://docs.microsoft.com/en-us/azure/sentinel/bookmarks
Use hunting bookmarks for data investigations
1. In the Azure portal, navigate to Microsoft Sentinel > Threat

management > Hunting > Bookmarks tab, and select the bookmark or bookmarks you want
to investigate.
2. In the bookmark details, ensure that at least one entity is mapped.
3. Select Investigate to view the bookmark in the investigation graph.
For instructions to use the investigation graph, see Use the investigation graph to deep dive.
https://docs.microsoft.com/en-us/azure/sentinel/bookmarks
Convert a hunting query to an analytical rule
After connecting your data sources to Microsoft Sentinel, create custom analytics rules to help
discover threats and anomalous behaviors in your environment.
Analytics rules search for specific events or sets of events across your environment, alert you
when certain event thresholds or conditions are reached, generate incidents for your SOC to
triage and investigate, and respond to threats with automated tracking and remediation
processes.
Create a custom analytics rule with a scheduled query

1. From the Microsoft Sentinel navigation menu, select Analytics.
2. In the action bar at the top, select +Create and select Scheduled query rule. This opens
the Analytics rule wizard.
https://docs.microsoft.com/en-us/azure/sentinel/detect-threats-custom

SC 200

Uploaded by

Copyright:

Available Formats

SC 200

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SC 200

Uploaded by

Copyright:

Available Formats

Exam SC-200

Microsoft Security Operations

Responsibilities include threat management, monitoring, and response by using a variety of

How to use this guide ……………………………………………………………………………………………………. 5

In the exam …………………………………………………………………………………………………………………… 5

Key Learning Objectives ………………………………………………………………………………………………… 6

Mitigate threats using Microsoft 365 Defender (25-30%) ……………………………………….. 7

Detect, investigate, respond, and remediate threats to the

productivity environment by using Microsoft Defender for Office 365 ……………….. 7

Detect, investigate, respond, and remediate endpoint

threats by using Microsoft Defender for Endpoint ………………………………………………. 14

Detect, investigate, respond, and remediate identity threats …………………………….. 23

Detect, investigate, respond, and remediate application threats ………………………...27

Manage cross-domain investigations in Microsoft 365 Defender portal ……………… 30

Mitigate threats using Microsoft Defender for Cloud (25-30%) ……………………………… 32

Design and configure a Microsoft Defender for Cloud implementation ………………. 32

Plan and implement the use of data connectors for ingestion of

data sources in Microsoft Defender for Cloud ……………………………………………………. 35

Manage Microsoft Defender for Cloud alert rules ……………………………………………… 39

Configure automation and remediation ……………………………………………………………. 40

Investigate Microsoft Defender for Cloud alerts and incidents ………………………….. 42

Design and configure a Microsoft Sentinel workspace ……………………………………….. 47

Plan and Implement the use of data connectors for ingestion of

data sources in Microsoft Sentinel ……………………………………………………………………. 52

Manage Microsoft Sentinel analytics rules ………………………………………………………… 60

Configure Security Orchestration Automation and Response

SOAR) in Microsoft Sentinel ……………………………………………………………………………… 64

Manage Microsoft Sentinel Incidents ………………………………………………………………… 69

Use Microsoft Sentinel workbooks to analyze and interpret data ………………………. 75

Hunt for threats using Microsoft Sentinel ………………………………………………………….. 78

How to use this guide

Key Learning Objectives

Detect, investigate, respond, and remediate threats to the productivity

• Soft delete email messages or clusters

Threats and remediation actions

Category Threat/risk Remediation action(s)

Email Malware Soft delete email/cluster

Email Malicious URL Soft delete email/cluster

Email Zapped phish Soft delete email/cluster

Email Volume anomaly Automated investigation does not result in a

Although a high volume of email can indicate

Email No threats found Automated investigation does not result in a

User A user clicked a mali- Automated investigation does not result in a

User A user is sending mal- Automated investigation does not result in a

The user might be reporting malware/phish,

User Email forwarding Remove forwarding rule

Safe Attachments in Microsoft Defender for Office 365

Detect, investigate, respond, remediate threats to email by using Defender for

Manage data loss prevention policy alerts

Licensing for alert configuration options

Single-event alert configuration: Organizations that have an E1, F1, or G1 subscription or an

Aggregated alert configuration: To configure aggregate alert policies based on a threshold,

Assess and recommend sensitivity labels

Assess and recommend insider risk policies

Understand requirements and dependencies

Detect, investigate, respond, and remediate endpoint threats by using

Manage data retention, alert notification, and advanced features

Verify data storage location

Update data retention settings