SUN2000-12/15/17/20KTL-M0
Smart PV Controller
Higher Revenue Simple & Easy Safe & Reliable
Max. efficiency 98.65% 25 kg Arc fault protection
Efficiency Curve Circuit Diagram
Efficiency [%]
DC
99% Switch
PV1+
98% PV1- PVA
PV2+
DC/AC Output
97% PV2-
PVAB- EMI Converter Isolation Relay
Filter
PV3+
96% PVB
L1
PV3-
PV4+ Output EMI L2
95% Filter Filter
PV4-
L3
SPD
94% N
PE
93% SPD
0.00% 20.00% 40.00% 60.00% 80.00% 100.00%
480V 600V 850V
Load [%] SUN2000-12/15/17/20KTL-M0
SOLAR.HUAWEI.COM
SUN2000-12/15/17/20KTL-M0
Technical Specification
SUN2000 SUN2000 SUN2000 SUN2000
Technical Specification -12KTL-M0 -15KTL-M0 -17KTL-M0 -20KTL-M0
Efficiency
Max. efficiency 98.50% 98.65% 98.65% 98.65%
European weighted efficiency 98.00% 98.30% 98.30% 98.30%
Input
Max. input voltage 1 1,080 V
Operating voltage range 2
160 V ~ 950 V
Start voltage 200 V
Rated input voltage 600 V
Max. input current per MPPT 22 A
Max. short-circuit current 30 A
Number of MPP trackers 2
Max. number of inputs 4
Output
Grid connection Three phase
Rated output power 12,000 W 15,000 W 17,000 W 20,000 W
Max. apparent power 13,200 VA 16,500 VA 18,700 VA 22,000 VA
Rated output voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac , default 3W / N+PE ; 3W+PE
Rated AC grid frequency 50 Hz / 60 Hz
Max. output current 20 A 25.2 A 28.5 A 33.5 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤3%
Features & Protections
Input-side disconnection device Yes
Anti-islanding protection Yes
AC over-current protection Yes
AC short-circuit protection Yes
AC over-voltage protection Yes
DC reverse-polarity protection Yes
DC surge protection Type II
AC surge protection 3 Yes
Residual current monitoring unit Yes
Arc fault protection Yes
Ripple receiver control Yes
General Data
Operation temperature range -25 ~ + 60 °C (-13 °F ~ 140 °F) (Derating above 45 °C @ Rated output power)
Relative humidity 0 % RH ~ 100% RH
Max. operating altitude 0 - 4,000 m (13,123 ft.) (Derating above 2000 m)
Cooling Natural Convection
Display LED Indicators
RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE (optional);
Communication
4G / 3G / 2G via Smart Dongle-4G (optional)
Weight (with mounting plate) 25 kg
Dimensions (W x H x D)
525 x 470 x 262 mm (20.7 x 18.5 x 10.3 inch)
(incl. mounting plate)
Degree of protection IP65
Night Time Power Consumption < 5.5 W
Standard Compliance (more available upon request)
Safety EN/IEC 62109-1, EN/IEC 62109-2, IEC62116
G98, G99, EN 50438, EN50549, CEI 0-21, VDE-AR-N-4105, VDE-AR-N-4110, AS 4777, C10/11, ABNT, UTE C15-
Grid connection standards
712, RD 1699, TOR D4, IEC61727, DEWA, MEA(12,20KTL-M0), PEA(12,20KTL-M0)
*1 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
*2 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
*3 Compatible TYPE II protection class according to EN/IEC 61643-11
Version No.:01-(20190716) SOLAR.HUAWEI.COM
SUN2000-12/15/17/20KTL-M2
Smart PV Controller
Active Safety Higher Yields Flexible Communication
AI Powered Arcing Protection Up to 30% More Energy with Optimizer WLAN, Fast Ethernet, 4G
Communication Supported
Efficiency Curve Circuit Diagram
Efficiency [%]
DC
99% Switch
98%
DC/AC Output
97% Converter Isolation Relay
96%
95%
94%
93%
0.00% 20.00% 40.00% 60.00% 80.00% 100.00%
480V 600V 850V
Load [%] SUN2000-12/15/17/20KTL-M2
SOLAR.HUAWEI.COM
SUN2000-12/15/17/20KTL-M2
Technical Specification
SUN2000 SUN2000 SUN2000 SUN2000
Technical Specification -12KTL-M2 -15KTL-M2 -17KTL-M2 -20KTL-M2
Efficiency
Max. efficiency 98.50% 98.65% 98.65% 98.65%
European weighted efficiency 98.00% 98.30% 98.30% 98.30%
Input
Recommended max. PV power 1 18,000 Wp 22,500 Wp 25,500 Wp 30,000 Wp
Max. input voltage 2 1,080 V
Operating voltage range 3 160 V ~ 950 V
Start-up voltage 200 V
Rated input voltage 600 V
Max. input current per MPPT 22 A
Max. short-circuit current 30 A
Number of MPP trackers 2
Max. number of inputs 4
Output
Grid connection Three phase
Rated output power 12,000 W 15,000 W 17,000 W 20,000 W
Max. apparent power 13,200 VA 16,500 VA 18,700 VA 22,000 VA
Rated output voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W + N + PE
Rated AC grid frequency 50 Hz / 60 Hz
Max. output current 20 A 25.2 A 28.5 A 33.5 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤3%
Features & Protections
Input-side disconnection device Yes
Anti-islanding protection Yes
AC over-current protection Yes
AC short-circuit protection Yes
AC over-voltage protection Yes
DC reverse-polarity protection Yes
DC surge protection TYPE II
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring unit Yes
Arc fault protection Yes
Ripple receiver control Yes
Integrated PID recovery 4 Yes
General Data
Operation temperature range -25 ~ + 60 °C (-13 °F ~ 140 °F)
Relative humidity 0 % RH ~ 100% RH
Max. operating altitude 0 ～ 4,000 m (13,123 ft.) (Derating above 2000 m)
Cooling Natural Convection
Display LED Indicators; Integrated WLAN + FusionSolar App
RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional)
Communication
4G / 3G / 2G via Smart Dongle-4G (Optional)
Weight (with mounting plate) 25 kg
Dimensions (W x H x D)
525 x 470 x 262 mm (20.7 x 18.5 x 10.3 inch)
(incl. mounting plate)
Degree of protection IP65
Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P
Standard Compliance (more available upon request)
Safety EN/IEC 62109-1, EN/IEC 62109-2
G98, G99, EN 50549, CEI 0-21, CEI 0-16, VDE-AR-N-4105, VDE-AR-N-4110, AS 4777.2, C10/11, ABNT,
Grid connection standards
VFR 2019, RD 1699, RD 661, PO 12.3, TOR D4, IEC61727, IEC62116, DEWA
*1 Inverter max input PV power is 40,000 Wp when long strings are designed and fully connected with SUN2000-450W-P power optimizers.
*2 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
*3 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
*4 SUN2000-12~20KTL-M2 raises potential between PV- and ground to above zero through integrated PID recovery function to recover module degradation from PID. Supported module types include: P-type (mono, poly)
Version No.:01-(20190716) SOLAR.HUAWEI.COM
