Scribd
Upload
182 views2 pages

Waterproofing Compound

Uploaded by

saniya.acdkmsn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
182 views2 pages

Waterproofing Compound

Uploaded by

saniya.acdkmsn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LAVATEX 2000 is a high performance ready Specific Gravity : 1.03 +/- 0.

01
to use, cold applied, high build liquid Non-volatile content : 65% (Approx.)
waterproofing membrane based on polymer Rubber content : 12% (Approx.)
modified bitumen emulsion. LAVATEX 2000 pH : 11.0 – 13.0
forms a seamless, highly elastic and durable VOC : < 10 g / kg
film that adheres well to most of the common Drying Time : 1 – 3 hours
substrates e.g. concrete, cement blocks, wood, Full dry : 3 – 4 days
existing roof felts. LAVATEX 2000 is highly
resistant to chlorides and sulphates commonly The drying time depends on the type of
present in the soil.Also resistant to fungus substrate, temperature, humidity and thickness
growth. of layer, etc.

USES PROPERTIES OF DRY FILM


• Waterproofing of concrete and block Softening point R & B
foundations, retaining walls, (ASTM D36 - 84) : > 100ºC.
basements and wet areas such as Elongation at break
kitchen, toilet floors and balconies. (ASTM D412) : 700% approximately
• Damp proof membrane in sandwich Water vapour permeability
panel constructions (ASTM E96- 92) : 0.15gr/m2/day
• Curing membrane cum protective Resistance to water
coating for sub structure (ASTM D2939) : No Blistering or re-
• Façade damp proofing emulsification
STANDARDS
FEATURES Protection of buildings against Ground water:
• Single component, ready to use. As per BS 102 Code of practice.
• Resistant to temperatures from -20 0C to Curing membrane: ASTM C 309:1998
+110 0C. ASTM D 2939
• Easy to use.
SURFACE PREPARATION
• Non-flammable and Non-toxic.
All surfaces should be sound, clean and free of
• Applicable on damp surfaces. contaminants. Absorbent surfaces e.g.
• Resistant to chlorides & sulphates usually concrete should preferably be dampened with
present in the soil. water. In kitchens, toilets and other wet areas
• Environment friendly all the openings should be properly sealed.
• VOC Free On all weak points such as cracks or around
the pipes use a woven fiberglass mesh as
TYPICAL PRODUCT LAVATEX 2000.
CHARACTERISTICS
Appearance : Thick brownish
emulsion dries to a
black Flexible
protective membrane.
APPLICATION CLEANING
LAVATEX 2000 can be applied by brush, Tools may be cleaned with water as long as
roller or squeegee. Hot, dry or very porous the product is wet. Once dry, by mechanical
substrate should be dampened with clean means only.
water prior to application of LAVATEX 2000.
When two or more coats are required, ensure TECHNICAL SERVICES
that the preceding coat is fully dry before Technical assistance and information is
applying the successive coat, which should be available by calling Falcon Chemicals
applied at right angle to preceding coat. (L.L.C.) on specific application.

LAVATEX 2000 also acts as a curing HEALTH AND SAFETY


membrane; hence it may be applied to fresh Use normal safety precautions. Wear rubber
concrete immediately after the removal of hand gloves, safety shoes and safety goggles
formwork, eliminating the need of while using and handling the product. Avoid
conventional curing with water. Since it gives contact with skin and eyes. In case of
a permanent black finish LAVATEX 2000 is accidental contact with eyes, wash with plenty
recommended as curing membrane only for of water and seek medical treatment
surfaces which have no aesthetic value such as immediately.
sub-structures of buildings.
DISCLAIMER
Caution: Should not be used as curing Use this leaflet as a guide for the use of the
membrane on surfaces to be painted. product concerned. The information given is
in accordance with latest technical
APPLICATION RATE developments. However, we cannot accept
• For damp proofing/vapour barrier: liability/responsibility for any work carried
3 – 4 m² / kg /coat – Apply 2 coats out with our materials, as we have no control
• Waterproofing membrane: over the method of application used or the
1m²/ kg /coat – apply 2 coats condition of site involved.
• Curing membrane:
2 – 3 m²/kg – apply one coat ISSUE DATE: JANUARY 2013
This technical specification supercedes all
PACKING previous data sheets.
18 kg pail and 200 kg drum.

STORAGE/SHELF LIFE
Keep away from direct sunlight and store
under normal warehouse conditions.
Container must be tightly closed. Shelf life of
the product is 12 months from the date of
manufacturing provided it is stored in
unopened factory packed drums.

You might also like