B Tech Mctr-updated-curriculum-R2023 240220 220013

SRI MANAKULA VINAYAGAR
ENGINEERING COLLEGE
(An Autonomous Institution)
Puducherry
B.TECH. - MECHATRONICS
ACADEMIC REGULATIONS 2023

(R-2023)
CURRICULUM AND SYLLABI

Volume – I
Academic Curriculum R-2023 2
COLLEGE VISION AND MISSION

VISION
To be globally recognized for excellence in quality education, innovation and research for the
transformation of lives to serve the society.
MISSION
M1: Quality Education:

To provide comprehensive academic system that amalgamates the cutting edge technologies with best
practices.
M2: Research and Innovation:

To foster value-based research and innovation in collaboration with industries and institutions globally
for creating intellectuals with new avenues.
M3: Employability and Entrepreneurship:

To inculcate the employability and entrepreneurial skills through value and skill based training.
M4: Ethical Values:

To instill deep sense of human values by blending societal righteousness with academic
professionalism for the growth of society.
DEPARTMENT VISION AND MISSION
VISION
To be a department with outstanding competencies in education and research in interdisciplinary field

of Mechatronics Engineering for the prosperity of students and society.
MISSION
M1 - Quality Integration: To uphold excellence in education by integrating the teaching learning

process with hands- on trainings in updated technologies.
M2 - Research Exploration: To maintain a dynamic balance between learning and research by

encompassing activities related to Research, Industrial projects and Innovation Contests.
M3 – Personality Development: To enrich the team spirit and entrepreneurship skills through training
programmes on personality development for career prospects.
M4 – Social Ethics: To enhance the principle of highest ethical values by inculcating code of conduct
for the betterment of the Society.
B.Tech. Mechatronics
PROGRAMME OUTCOMES (POs)

PO1: Engineering knowledge:
Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering
specialization to the solution of complex engineering problems.
PO2: Problem analysis:

Identify, formulate, research literature, and analyze complex engineering problems reaching
substantiated conclusions using first principles of mathematics, natural sciences, and engineering
sciences.
PO3: Design/development of solutions:

Design solutions for complex engineering problems and design system components or processes
that meet the specified needs with appropriate consideration for the public health and safety, and the
cultural, societal, and environmental considerations.
PO4: Conduct investigations of complex problems:

Use research-based knowledge and research methods including design of experiments, analysis and
interpretation of data and synthesis of the information to provide valid conclusions.
PO5: Modern tool usage:

Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools
including prediction and modeling to complex engineering activities with an understanding of the
limitations.
PO6: The engineer and society:

Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and
cultural issues and the consequent responsibilities relevant to the professional engineering practice.
PO7: Environment and sustainability:

Understand the impact of the professional engineering solutions in societal and environmental
contexts, and demonstrate the knowledge of and need for sustainable development.
PO8: Ethics:
Apply ethical principles and commit to professional ethics and responsibilities and norms of the
engineering practice.
PO9: Individual and team work:

Function effectively as an individual, and as a member or leader in diverse teams, and in
multidisciplinary settings.
PO10: Communication:
Communicate effectively on complex engineering activities with the engineering community and with
society at large, such as, being able to comprehend and write effective reports and design
documentation, make effective presentations, and give and receive clear instructions.
PO11: Project management and finance:

Demonstrate knowledge and understanding of the engineering and management principles and
apply these to one‘s own work, as a member and leader in a team, to manage projects and in
multidisciplinary environments.
PO12: Life-long learning:

Recognize the need for, and have the preparation and ability to engage in independent and life-long
learning in the broadest context of technological change.
PROGRAM EDUCATIONAL OBJECTIVES (PEOs)
PEO1: Strong Knowledge

To provide comprehensive knowledge on Science, Mathematics & multiple Engineering disciplines,
along-with the ability to apply the gained knowledge.
PEO2: Technical Competency

To produce graduates who can demonstrate technical competence in the field of Mechatronics
Engineering and develop solutions to the complex problems.
PEO3: Task Orientation

To produce graduates who function effectively in a multi-disciplinary environment, individually and
within a society towards accomplishing tasks.
PEO4: Team Work

To produce graduates who would be able to take individual responsibility and work as a part of a team
towards the fulfillment of both individual and organizational goals.
PEO5: Professional Competency

To produce graduates with professional competence by life-long learning on advanced studies,
professional skills and other professional activities related to Mechatronics Engineering society.
PROGRAM SPECIFIC OUTCOMES (PSOs)
PSO1: Understanding the Concepts

To comprehend the concepts of Mechatronics and their applications in the field of Automated
Manufacturing Systems, Robotics, Automobile Technology, Aerial vehicles and other relevant areas.
PSO2: Application of Knowledge

To apply technical knowledge in modern hardware and software tools related to Mechatronics for
solving real world problems.
PSO3: Solution Development

To develop the ability to analyze, comprehend and design mechatronics subsystems for a variety of
engineering applications for the benefits of society.
STRUCTURE FOR UNDERGRADUATE ENGINEERING PROGRAM
S.No Course Category Breakdown of Credits
1 Humanities Social Science and Management courses (HS) 15
2 Basic Sciences (BS) 20
3 Engineering Sciences (ES) 24
4 Professional Core (PC) 69
5 Professional Electives (PE) 18
6 Open Electives (OE) 09
7 Professional Activities (PA) 14
8 Ability Enhancement Courses (AEC*) -
9 Mandatory courses (MC*) -
Total 169
SCHEME OF CREDIT DISTRIBUTION – SUMMARY
Credits per Semester

Sl. Total
Course Category
No I II III IV V VI VII VIII Credits
Humanities Social Sciences and Management

1 3 5 1 1 2 - - 3 15
courses (HS)
2 Basic Sciences(BS) 7 4 5 4 - - - - 20
3 Engineering Sciences (ES) 12 4 4 4 - - - - 24
4 Professional Core (PC) - 8 13 14 12 15 7 - 69
5 Professional Electives (PE) - - - - 3 3 6 6 18
6 Open Electives (OE) - - - - 3 3 3 - 09
7 Professional Activities (PA) - - - - 1 2 2 8 13
8 Professional Activities for Internship (PA) - - - - - - 1 - 1
8 Ability Enhancement Courses (AEC*) - - - - - - - - -
10 Mandatory courses (MC*) - - - - - - - - -
Total 22 21 23 23 21 23 19 17 169
* AEC and MC are not included for CGPA calculation
ANNEXURE I
SEMESTER – I
Sl. Course Periods Max. Marks
Course Title Category Credits
No. Code L T P CAM ESM Total
Theory
1 U23MATC01 Engineering Mathematics - I BS 3 1 0 4 25 75 100
Physical Science for
2 U23BSTC01 BS 3 0 0 3 25 75 100
Engineers
3 U23CSTC01 Programming in C ES 3 0 0 3 25 75 100
Basics of Civil and
4 U23ESTC01 ES 3 0 0 3 25 75 100
Mechanical Engineering
5 U23ESTC02 Engineering Mechanics ES 2 1 0 3 25 75 100
Theory cum Practical
6 U23ENBC01 Communicative English - I HS 2 0 2 3 20 80 100
Practical
Engineering Graphics using
7 U23ESPC03 ES 0 0 2 1 50 50 100
AutoCAD
8 U23CSPC01 Programming in C Laboratory ES 0 0 2 1 50 50 100
Design Thinking and IDEA
9 U23ESPC02 ES 0 0 2 1 50 50 100
Lab
Ability Enhancement Course
10 U23MCC1XX Certification Course - I** AEC 0 0 4 - 100 - 100
Mandatory Course
11 U23MCM101 Induction Programme MC 2 Weeks - - - -
TOTAL 22 415 585 1000
SEMESTER – II
Sl. Periods Max. Marks
Course Code Course Title Category Credits
No. L T P CAM ESM Total
Theory
1 U23MATC02 Mathematics – II BS 3 1 0 4 25 75 100
Basics of Electrical and
2 U23ESTC03 ES 3 0 0 3 25 75 100
Electronics Engineering
3 U23MCT201 Manufacturing Technology PC 3 0 0 3 25 75 100
Thermodynamics and Heat
4 U23MCT202 PC 3 0 0 3 25 75 100
Transfer
5 U23HSTC01 Universal Human Values-II HS 2 0 0 2 25 75 100
6 U23ENBC02 Communicative English - II HS 2 0 2 3 20 80 100
Practical
Basic Electrical and
7 U23ESPC01 Electronics Engineering ES 0 0 2 1 50 50 100
Laboratory
Thermal Engineering
8 U23MCP201 PC 0 0 2 1 50 50 100
Laboratory
Manufacturing Technology
9 U23MCP202 PC 0 0 2 1 50 50 100
Laboratory
10 U23MCC2XX Certification Course – II** AEC 0 0 4 - 100 - 100
Mandatory Course
11 U23MCM202 Sports, Yoga and NSS MC 2 0 0 - 100 - 100
TOTAL 21 515 585 1200
#
Professional Electives are to be selected from the list given in Annexure I
$
Open electives are to be selected from the list Annexure III
** Certification courses are to be selected from the list given in Annexure II
SEMESTER – III
Theory
1 U23MATC03 Probability and Statistics BS 3 1 0 4 25 75 100
2 U23ADTC01 Programming in Python ES 3 0 0 3 25 75 100
Analog and Digital
3 U23MCT303 PC 3 0 0 3 25 75 100
Electronics
Fluid Mechanics and
4 U23MCT304 PC 3 0 0 3 25 75 100
Machinery
Sensors, Transducers and
5 U23MCT305 PC 3 0 0 3 25 75 100
Measurement systems
6 U23MCB306 Mechanics of Solids PC 2 0 2 3 20 80 100
Practical
Engineering Mathematics
7 U23MAPC01 BS 0 0 2 1 50 50 100
Laboratory
8 U23ENPC01 General Proficiency – I HS 0 0 2 1 50 50 100
Programming in Python
9 U23ADTP01 ES 0 0 2 1 50 50 100
Laboratory
Analog and Digital Electronics
10 U23MCP303 PC 0 0 2 1 50 50 100
Laboratory
11 U23MCC3XX Certification Course – III** AEC 0 0 4 - 100 - 100
12 U23MCS301 Skill Enhancement Course- I SEC 0 0 2 - 100 - 100
Mandatory Course
13 U23MCM303 Environmental Science MC 2 0 0 - 100 - 100
TOTAL 23 665 635 1300
SEMESTER – IV
Theory
Numerical Methods and
1 U23MATC04 BS 3 1 0 4 25 75 100
Optimization
2 U23CSTC03 Data Structures ES 3 0 0 3 25 75 100
3 U23MCT407 Power Electronics and Drives PC 3 0 0 3 25 75 100
Microprocessors and
4 U23MCT408 controllers for Mechatronics PC 3 0 0 3 25 75 100
Systems
5 U23MCT409 Theory of Machines PC 3 0 0 3 25 75 100
6 U23MCB410 IoT for Mechatronics PC 2 0 2 3 20 80 100
Practical
7 U23ENPCO2 General Proficiency - II HS 0 0 2 1 50 50 100
8 U23CSPC02 Data Structures Laboratory ES 0 0 2 1 50 50 100
Power Electronics and Drives
9 U23MCP404 PC 0 0 2 1 50 50 100
Laboratory
Microprocessors and
10 U23MCP405 PC 0 0 2 1 50 50 100
Controllers Laboratory
10 U23MCC4XX Certification Course – IV** AEC 0 0 4 - 100 - 100
11 U23MCS402 Skill Enhancement Course- II SEC 0 0 2 - 100 - 100
Mandatory Course
12 U23MCM404 Indian Constitution MC 2 0 0 - 100 - 100
TOTAL 23 665 575 1200
* Skill Enhancement Courses (I and II) are to be selected from the list given in Annexure III
SEMESTER – V
Theory
1 U23HSTC02 Research Methodology HS 3 0 0 2 25 75 100
PLC and Industrial
2 U23MCT511 PC 3 0 0 3 25 75 100
Automation Systems
3 U23MCT512 Fluid Power System PC 3 0 0 3 25 75 100
Control Systems for
4 U23MCT513 PC 3 0 0 3 25 75 100
Mechatronics Systems
#
5 U23MCE5XX Professional Elective – I PE 3 0 0 3 25 75 100
$
6 U23MCO5XX Open Elective - I OE 3 0 0 3 25 75 100
Practical
Industrial Automation
7 U23MCP506 PC 0 0 2 1 50 50 100
Laboratory
Virtual Instrumentation
8 U23MCP507 PC 0 0 2 1 50 50 100
Laboratory
Fluid Power System 50 50
9 U23MCP508 PC 0 0 2 1 100
Laboratory
Project Work
10 U23MCW501 Micro Project PA 0 0 2 1 100 - 100
11 U23MCC5XX Certification Course – V** AEC 0 0 4 - 100 - 100
12 U23MCS503 Skill Enhancement Course- III SEC 0 0 2 - 100 - 100
Mandatory Course
Essence of Indian Traditional
13 U23MCM505 MC 2 0 0 - 100 - 100
Knowledge
TOTAL 21 700 600 1300
SEMESTER – VI
Theory
Computer Aided
1 U23MCT614 PC 3 0 0 3 25 75 100
Manufacturing
2 U23MCTC02 Embedded System Design PC 3 0 0 3 25 75 100
Design of Mechanical
3 U23MCT616 PC 3 0 0 3 25 75 100
Elements
4 U23MCT617 Industrial Robotics PC 3 0 0 3 25 75 100
#
5 U23MCE6XX Professional Elective – II PE 3 0 0 3 25 75 100
$
6 U23MCO6XX Open Elective - II OE 3 0 0 3 25 75 100
Practical
Embedded System Design
7 U23ECPC02 PC 0 0 2 1 50 50 100
Laboratory
Computer Aided
8 U23MCP610 PC 0 0 2 1 50 50 100
Manufacturing Laboratory
9 U23MCP611 Industrial Robotics Laboratory PC 0 0 2 1 50 50 100
Project Work
10 U23MCW602 Mini Project PA 0 0 2 1 100 - 100
11 U23MCC6XX Certification Course – VI** AEC 0 0 4 - 100 - 100
Mandatory Course
12 U23MCM606 Professional Ethics MC 0 0 2 - 100 100
TOTAL 22 600 600 1600
SEMESTER – VII
Theory
Automation in Manufacturing
1 U23MCT718 PC 3 0 0 3 25 75 100
Systems
Design of Mechatronics
2 U23MCT719 PC 3 0 0 3 25 75 100
System
#
3 U23MCE7XX Professional Elective - III PE 3 0 0 3 25 75 100
#
4 U23MCE7XX Professional Elective - IV PE 3 0 0 3 25 75 100
$
5 U23MCO7XX Open Elective - III OE 3 0 0 3 25 75 100
Practical
6 U23MCP712 Seminar PC 0 0 2 1 100 - 100
Project Work
7 U23MCW703 Project Phase – I PA 0 0 4 2 50 50 100
8 U23MCW704 Internship / Inplant Training PA - - 2 1 100 - 100
TOTAL 19 375 425 800
SEMESTER – VIII
Theory
Entrepreneurship and
1 U23HSTC03 HS 3 0 0 3 25 75 100
Business Management
#
2 U23MCE8XX Professional Elective – V PE 3 0 0 3 25 75 100
#
3 U23MCE8XX Professional Elective – V I PE 3 0 0 3 25 75 100
Project Work
4 U23MCW805 Project Phase – II PA 0 0 16 8 50 100 150
Total 17 125 325 450
ANNEXURE II
PROFESSIONAL ELECTIVE AND OPEN ELECTIVE COURSES
Professional Elective – I (Offered in Semester V)
Sl. No. Course Code Course Title
1 U23MCE501 Computer Integrated Manufacturing
2 U23MCE502 Image Processing and Computer Vision
3 U23MCE503 Computer Network and Cyber Security
4 U23MCE504 Autonomous Mobile Robots
5 U23ICEC01 Virtual Instrumentation
Professional Elective – II (Offered in Semester VI)
1 U23MCE606 Heating Ventilation and Air-Conditioning
2 U23ECO602 Consumer Electronics
3 U23MCE608 Introduction to Data Science
4 U23MCE609 Robot Process Automation
5 U23MCE610 Computer Vision using Python
Professional Elective – III (Offered in Semester VII)
1 U23MCE711 Sustainable Manufacturing
2 U23ECEC04 Automotive Electronics Systems
3 U23MCE713 Data Communication and Network Systems
4 U23MCE714 Drone Technologies
5 U23MCE715 Artificial Intelligence and Machine Learning
Professional Elective – IV (Offered in Semester VII)
1 U23MCE716 Operations Research
2 U23MCE717 Product Lifecycle Management
3 U23MCE718 Data Security and Privacy
4 U23MCE719 Underwater Robots
5 U23MCE70 Product Design and Development
Professional Elective – V (Offered in Semester VIII)
1 U23MCE821 Unconventional Machining processes
2 U23MCE822 Automation Techniques & Tools – DevOps
3 U23MCE823 Database Management Systems
4 U23ECEC02 Wireless Sensor Networks
5 U23ITEC05 Virtual Reality and Augmented Reality
Professional Elective – VI (Offered in Semester VIII)
1 U23MCE826 Non Destructive Testing
2 U23MCE827 Supply Chain Management
3 U23MCE828 Building Automation
4 U23MCE829 Robots and Systems in Smart Manufacturing
5 U23MCE830 Introduction to NLP
Open Electives
1 U23MCO501 Computer Integrated Manufacturing
2 U23MCO502 Automation in Manufacturing
3 U23MCO603 Non-Destructive Testing
4 U23MCO604 Building Automation
5 U23MCO705 Robots and Systems in Smart Manufacturing
6 U23MCO706 Unconventional Machining processes
ANNEXURE - II
OPEN ELECTIVE COURSES
Open Elective – I / Open Elective – II

S. Offering
Course Code Course Title Eligible Department to opt OE course
No Department
1 U23HSOC01 Intellectual Property Rights Common to B. Tech
2 U23HSOC02 New Product Development
(Offered in Semester V for EEE, ECE,
3 U23HSOC03 Finance for Engineers MBA ICE, CIVIL, BME, CCE, FT)
4 U23HSOC04 Economics for Engineers (Offered in Semester VI for CSE, IT,
5 U23HSOC05 Marketing Management MECH, Mechatronics, AI&DS)
Open Elective – I / Open Elective – II

(Offered in Semester V for CSE, IT, MECH, Mechatronics, AI&DS)
(Offered in Semester VI for EEE, ECE, ICE, CIVIL, BME, CCE, FT)
ECE, ICE, MECH, CIVIL, MCTR, CCE,
1 U23EEDC01 Electrical Safety Engineering EEE
BME, IT, CSE, FT, AI&DS
Solar Photovoltaic Fundamental and ECE, ICE, MECH, CIVIL, MCTR, CCE,
2 U23EEOC02 EEE
Applications BME, IT, CSE, FT, AI&DS
EEE, ICE, MECH, CIVIL, CCE, BME,
3 U23ECOC01 Engineering Computation with MATLAB ECE
AI&DS, Mechatronics
EEE, ICE, CSE, MECH, IT, CIVIL, CCE,
4 U23ECOC02 Consumer Electronics ECE
BME, Mechatronics, FT
EEE, ECE, ICE, MECH, CIVIL, BME,
5 U23CSOC01 Structured Query Language CSE
Mechatronics
6 U23CSOC02 Computer Peripherals and Networking CSE
Mechatronics
EEE, ECE, ICE, BME,MECH,CIVIL,
7 U23ITOC01 Database System: Design & Development IT
MECHATRONICS
EEE, ECE, ICE, CCE, BME, MECH,
8 U23ITOC02 Computer Hardware and Troubleshooting IT
MECHATRONICS
EEE, ECE, CSE, IT, MECH, CIVIL,
9 U23ICOC01 Sensors and Transducers ICE
CCE, CSBS, AI&DS
EEE, ECE, CSE, IT, MECH, CIVIL,
10 U23ICOC02 Instrumentation for Industry 4.0 ICE
CCE, CSBS, AI&DS, Mechatronics
11 U23MEOC01 Rapid Prototyping MECH EEE, ECE, ICE, CIVIL, BME, FT
12 U23MEOC02 Material Handling System MECH EEE, ICE, CIVIL, Mechatronics
13 U23MEOC03 Industrial Engineering for Textile MECH FT
Heating, ventilation and air conditioning
14 U23MEOC04 MECH EEE, ECE, ICE, CIVIL
system (HVAC)
EEE, ECE, MECH, BME, IT,
15 U23CEOC01 Energy and Environment CIVIL
Mechatronics, FT, CSBS
16 U23CEOC02 Building Science and Engineering CIVIL EEE, MECH, BME
EEE, ECE, CSE, IT, ICE, MECH, BME,
17 U23CEOC03 Disaster Management CIVIL
CCE, AI&DS, FT
EEE, ECE, CSE, IT, ICE, CCE, MECH,
18 U23BMOC01 Medical Electronics BME
Mechatronics, AI&DS
19 U23BMOC02 Telemedicine BME EEE, ECE, CSE, IT, ICE, CCE, AI&DS
20 U23MCOC01 Building Automation MCTR EEE,MECH, CIVIL
21 U23MCOC02 Automation in Manufacturing MCTR EEE,MECH, CIVIL
Introduction to Communication EEE, MECH, CSE,IT, CIVIL, ICE,
22 U23CCOC01 CCE
Technologies Mechatronics, BME, AIDS
23 U23CCOC02 Introduction to Computer Networks CCE EEE, MECH, CIVIL, ICE, Mechatronics,
BME, AIDS
EEE, ECE, CSE, IT, ICE, MECH, CIVIL,
24 U23ADOC01 Knowledge Representation and Reasoning AI&DS
CCE
25 U23ADOC02 Introduction to Data Science AI&DS
CCE, BME, Mechatronics
Principles of Artificial Intelligence and EEE, ECE, CSE, IT, ICE, MECH, CIVIL,
26 U23ADOC03 AI&DS
Machine Learning CCE, BME, Mechatronics.
EEE,ECE,ICE,CIVIL,MECH,Mechatroni
27 U23CBOC01 Business Applications of Game Theory CSBS
cs,BME
29 U23CBOC02 Cryptology and Analysis CSBS
cs,BME
31 U23FTOC01 Textile Arts and Crafts FT
32 U23FTOC02 Garment Manufacturing Technology FT
Open Elective – III (Offered in Semester VII)
1 U23EEOC03 Electric and Hybrid Vehicles EEE
BME, IT, CSE, AI&DS,CSBS
2 U23EEOC04 Energy Conservation and Management EEE
BME, IT, CSE, AI&DS,CSBS
3 U23ECOC03 IoT and its Applications ECE
FT
4 U23ECOC04 Selected Topics in Communications ECE
BME, Mechatronics, FT
5 U23CSOC03 Web Programming CSE
Mechatronics
EEE, ICE, MECH, CIVIL, CCE, BME,
6 U23CSOC04 Cloud Technology CSE
Mechatronics
EEE, ECE, ICE, CSE, MECH, CIVIL,
7 U23ITOC03 Essentials of Data Science IT
8 U23ITOC04 Big Data Technologies IT EEE, ICE, MECH, CIVIL, CCE, BME
CSE, IT, MECH, CSBS, AI&DS,
9 U23ICOC03 Fuzzy Logic and Neural Networks ICE
Mechatronics
ECE, CSE, IT, MECH, CCE, CSBS,
10 U23ICOC04 Industrial Automation ICE
AI&DS
Creativity Innovation and New Product EEE, ECE, ICE, CIVIL, BME,
11 U23MEOC05 MECH
Development Mechatronics
Principles of Hydraulic and Pneumatic
12 U23MEOC06 MECH EEE, ECE, ICE, CIVIL
System
13 U23MEOC07 Supply Chain Management MECH EEE, ECE, CIVIL, Mechatronics
EEE, ECE, CSE, IT, ICE, MECH, BME,
14 U23CEOC04 Air Pollution and Solid Waste Management CIVIL
CCE, AI&DS, FT, CSBS
15 U23CEOC05 Energy Efficient Buildings CIVIL EEE, ECE, MECH
EEE,ECE, CSE, IT, ICE, MECH, BME,
16 U23CEOC06 Global Warming and Climate Change CIVIL
CCE, AI&DS, FT, CSBS
EEE, ECE, CSE, IT, ICE, CCE, MECH,
17 U23BMOC03 Medical Robotics BME
Mechatronics, AI&DS,CSBS
18 U23BMOC04 Telehealth Technology BME EEE,ECE, ICE, CCE
19 U23MCOC03 Non-Destructive Testing MCTR
20 U23MCOC04 Computer Integrated Manufacturing MCTR EEE
Robots and Systems in Smart
21 U23MCOC05 MCTR EEE
Manufacturing
EEE, ECE, MECH, CSE,IT, CIVIL, ICE,
22 U23CCOC03 Web App Development CCE
Mechatronics, BME, AIDS
EEE, MECH, CSE,IT, CIVIL, ICE,
23 U23CCOC04 Network Essentials and Security CCE
Mechatronics, BME, AIDS
24 U23ADOC03 Data science Application of Vision AI&DS
25 U23ADOC04 Artificial Intelligence Applications AI&DS
CCE, BME
EEE,ECE,CSE,IT,ICE,CIVIL,MECH,Mec
26 U23CBOC03 Engineering Economics CSBS
hatronics,CCE,BME,AIDS,FT
27 U23CBOC04 Conversational AI CSBS
cs,BME
28 U23FTOC03 Fundamentals of Fashion Design FT
29 U23FTOC04 Pattern Making FT
Open Elective – I / Open Elective – II / Open Elective – III
Open Elective Courses offered to all brach of Engineering
1 U23ESOC01 Sustainable Engineering
2 U23ESOC02 Water and Waste Water Treatment
Technologies for Clean and Renewable
3 U23ESOC03
Energy
4 U23ESOC04 Economic Growth and Development
All branch of Engineering
5 U23ESOC05 Social Innovation in Industry 4.0
6 U23ESOC06 Urbanization and Environment
7 U23ESOC07 Sustainable River Basin Management
8 U23ESOC08 Environment and Development
Annexure – III
EMPLOYABILITY ENHANCEMENT COURSES – (A) CERTIFICATION COURSES

1 U23MCCX01 3ds Max
2 U23MCCX02 Advance Structural Analysis of Building using ETABS
3 U23MCCX03 Advanced Java Programming
4 U23MCCX04 Advanced Python Programming
5 U20MCCX05 Analog System Lab Kit
6 U23MCCX06 Android Medical App Development
7 U23MCCX07 Android Programming
8 U23MCCX08 ANSYS -Multiphysics
9 U23MCCX09 Artificial Intelligence
10 U23MCCX10 Artificial Intelligence and Edge Computing
11 U23MCCX11 Artificial Intelligence in Medicines
12 U23MCCX12 AutoCAD for Architecture
13 U20MCCX13 AutoCAD for Civil
14 U23MCCX14 AutoCAD for Electrical
15 U23MCCX15 AutoCAD for Mechanical
16 U23MCCX16 Azure DevOps
17 U23MCCX17 Basic Course on ePLAN
18 U23MCCX18 Basic Electro Pneumatics
19 U23MCCX19 Basic Hydraulics
20 U23MCCX20 Bio Signal and Image Processing Development System
21 U23MCCX21 Blockchain
22 U23MCCX22 Bridge Analysis
23 U20MCCX23 Building Analysis and Construction Management
24 U23MCCX24 Building Design and Analysis Using AECO Sim Building Designer
25 U23MCCX25 CATIA
26 U23MCCX26 CCNA (Routing and Switching)
27 U23MCCX27 CCNA (Wireless)
28 U23MCCX28 Cloud Computing
29 U23MCCX29 Computer Programming for Medical Equipments
30 U23MCCX30 Corel Draw
31 U23MCCX31 Creo (Modeling and Simulation)
32 U23MCCX32 Cyber Security
33 U23MCCX33 Data Science and Data Analytics
34 U23MCCX34 Data Science using Python
35 U23MCCX35 Data Science using R
36 U23MCCX36 Deep Learning
37 U23MCCX37 Design and Documentation using ePLAN Electric P8
38 U23MCCX38 Design of Biomedical Devices and Systems
39 U23MCCX39 Digital Marketing
40 U23MCCX40 Digital Signal Processing Development System
41 U23MCCX41 DigSILENT Power Factory
42 U23MCCX42 Electro Hydraulic Automation with PLC
43 U23MCCX43 Embedded System using Arduino
44 U23MCCX44 Embedded System using C
45 U23MCCX45 Embedded System with IoT
46 U23MCCX46 ePLAN Data Portal
47 U23MCCX47 ePLAN Electric P8
48 U23MCCX48 ePLAN Fluid
49 U23MCCX49 ePLAN PPE
50 U23MCCX50 Fusion 360
51 U23MCCX51 Fuzzy Logic and Neural Networks
52 U23MCCX52 Google Analytics
53 U23MCCX53 Hydraulic Automation
54 U23MCCX54 Industrial Automation
55 U23MCCX55 Industry 4.0
56 U23MCCX56 Internet of Things
57 U23MCCX57 Introduction to C Programming
58 U23MCCX58 Introduction to C++ Programming
59 U23MCCX59 IoT using Python
60 U23MCCX60 Java Programming
61 U23MCCX61 Machine Learning
62 U23MCCX62 Machine Learning and Deep Learning
63 U23MCCX63 Machine Learning for Medical Diagnosis
64 U23MCCX64 Mechatronics
65 U23MCCX65 Medical Robotics
66 U23MCCX66 Microsoft Dynamics 365 ERP for HR , Marketing and Finance
67 U23MCCX67 Mobile Edge Computing
68 U23MCCX68 Modeling and Visualization using Micro station
69 U23MCCX69 MX Road
70 U23MCCX70 Photoshop
71 U23MCCX71 PLC
72 U23MCCX72 Pneumatics Automation
73 U23MCCX73 Project Management
74 U23MCCX74 Python Programming
75 U23MCCX75 Revit Architecture
76 U23MCCX76 Revit Inventor
77 U23MCCX77 Revit MEP
78 U23MCCX78 Robotics
79 U23MCCX79 Search Engine Optimization
80 U23MCCX80 Software Testing
81 U23MCCX81 Solar and Smart Energy System with IoT
82 U23MCCX82 Solid Works
83 U23MCCX83 Solid Works with Electrical Schematics
84 U23MCCX84 Speech Processing
85 U23MCCX85 STAAD PRO V8i
86 U23MCCX86 Structural Design and Analysis using Bentley
87 U23MCCX87 Total Station
88 U23MCCX88 Video and Image Processing Development System
89 U23MCCX89 VLSI Design
90 U23MCCX90 Web Programming - I
91 U23MCCX91 Web Programming - II
Annexure – IV
EMPLOYABILITY ENHANCEMENT COURSES – (B) SKILL DEVELOPMENT COURSES

Skill Development Course 1: Demonstration in Engineering
1 U23MCS301
Practice Lab
Skill Development Course 2
U23MCS402 1) Excel for Statistical Approach
2
U23MCS403 2) Training on Arduino
U23MCS404 3) Computer Vision
Skill Development Course 3
3 U23MCS503 1) Power Transmission Systems

U23MCS504 2) 3D Printing
U23MCS505 3) Non-Destructive Testing
SEMESTER I
Department Mathematics Programme : B.Tech.
Semester I Course Category: BS End Semester Exam Type: TE

Course Periods/Week Credit Maximum Marks
U23MATC01
Code L T P C CAM ESE TM
Course Name ENGINEERING MATHEMATICS – I 3 1 - 4 25 75 100
(Common to All Branches Except CSBS)
Prerequisite Basic Mathematics
BT Mapping
On completion of the course, the students will be able to
(Highest Level)
CO1 Understand the concept of Eigen values and Eigen vectors, Diagonalization of a Matrix K3
Course CO2 Solve higher order differential equations K3
Outcome CO3 Understand the different types of partial differential equations K3
CO4 Know about the Applications of double and triple integrals K2
CO5 Gain the knowledge about Vector Calculus and its Applications K2
UNIT – I Matrices Periods:12
Rank of a Matrix – Systems of Linear Equations – Characteristic equation – Cayley Hamilton Theorem – Eigen values and
Eigen vectors of a real Matrix – Diagonalization of Matrices. CO1
UNIT – II Differential Equations (Higher Order) Periods:12

Linear Differential equations of higher order with constant coefficients – Euler‘s linear equation of higher order with variable
coefficients – Method of Variation of parameters. CO2
UNIT – III Functions of Several Variables Periods:12

Partial derivatives – Total derivatives – Maxima and Minima of two variables – Lagrange‘s Method of multipliers. CO3
UNIT – IV Multiple Integrals Periods:12
Multiple Integrals – Change of order of integration (Cartesian form). Applications: Area as a double integral (Cartesian form)
– Volume as a triple integral (Cartesian form).
CO4
UNIT – V Vector Calculus Periods:12

Gradient – Divergence and Curl – Directional derivatives – Irrotational and Solenoidal vector fields – Properties (Statement
only) – Gauss Divergence Theorem and Stoke‘s Theorem (without proofs).
CO5
Lecture Periods: 45 Tutorial Periods: 15 Practical Periods: - Total Periods: 60

Text Books
1. M.K. Venkataraman, ―Engineering Mathematics, The National Publishing Company, Madras, 2016.
th
2. N. P Bali and Manish Goyal, ―A Text Book of Engineering Mathematics‖, Lkshmi Publications, New Delhi, 9 Edition, 2018.
3. S. Narayanan and Manicavachagom T.K. Pillay,‖ Differential Equations and Its Applications‖, Paperback, Viswanathan.S,
Printers & Publishers Pvt Ltd, 2009.
Reference Books
1. Dr. G.Balaji, ―Matrices and Calculus (Engineering Mathematics-1)‖ Balaji Publication, Paperback, June 2021 Edition
2. Dr. A. Singaravelu, ―Engineering Mathematics – I‖, Meenakshi publications, Tamil Nadu, 2019.
3. Erwin Kreyszig, ―Advanced Engineering Mathematics ―, Wiley, 10th Edition, 2019.
4. B.V.Ramana,‖ Higher Engineering Mathematics‖, Tata McGraw – Hill, New Delhi, 6th Edition, 2018.
5. C W. Evans, ―Engineering Mathematics‖, A Programmed Approach, 3rd Edition, 2019.
Web References
1. http://www.yorku.ca/yaoguo/math1025/slides/chapter/kuttler-linearalgebra –slides- systems of equation-handout.pdf
2. http://www.math.cum.edu/~wn0g/2ch6a.pdf
3. https://nptel.ac.in/courses/122/104/122104017/
COs/POs/PSOs Mapping
Program Specific
Program Outcomes (POs)
COs Outcomes (PSOs)
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3
1 3 2 1 - 2 1 1 - - - - 1 3 - -
2 3 2 1 1 - 1 1 - - - - 1 3 - -
3 3 2 1 1 - 1 1 - - - - 1 3 - -
4 3 2 1 1 - 1 1 - - - - 1 3 - -
5 2 2 1 - - - 1 - - - - 1 3 - -
Correlation Level: 1 - Low, 2 - Medium, 3 – High
Evaluation Methods
Continuous Assessment Marks (CAM) End Semester

Total
Assessment Model Examination
CAT 1 CAT 2 Assignment* Attendance Marks
Exam (ESE) Marks
Marks 5 5 5 5 5 75 100
* Application oriented / Problem solving / Design / Analytical in content beyond the syllabus
Department Physics / Chemistry Programme : B.Tech.
Semester I Course Category: BS End Semester Exam Type: TE
U23BSTC01
Course
PHYSICAL SCIENCE FOR ENGINEERS 3 - - 3 25 75 100
Name
(Common to All Branches)
Prerequisite Physics of 12th standard or equivalent / Chemistry of 12th standard or equivalent.
BT Mapping
(Highest Level)
CO1 Understand the basic of properties of magnetic, dielectric and superconductors. K2
CO2 Identify the wave nature of the particles, physical significance of wave functions K3
Course CO3 Understand the basic principles of laser and fiber optics communication K2
Outcome CO4 Understand and familiar with the water treatment. K2
Understand the electrode potential for its feasibility in electrochemical reaction and
CO5 K2
uses of various batteries.
Understand the specific operating condition under which corrosion occurs and
CO6 K2
suggest a method to control corrosion.
SECTION A - PHYSICS
UNIT- I Magnetic, Dielectric and Superconducting Materials Periods:08
Introduction to magnetic materials, Ferromagnetism- Domain theory-Types of energy-Hysteresis-Hard and Soft magnetic
materials-ferrites-Dielectric materials-Typesof polarization – Langevin-Debye equation-Frequency effects on polarization- CO1
Dielectric breakdown- Ferroelectric materials-Superconducting materials and their properties.
UNIT- II Quantum Mechanics Periods:07

Matter Waves - de Broglie Wavelength - Uncertainty Principle –Physical Significance of wave functions - Schrodinger wave
CO2
Equation - Time Dependent - Time Independent - Application to Particle in a One Dimensional Box - Tunnel Diode.
UNIT- III Laser and Fiber Optics Periods:07

Lasers - Principles of Laser - Spontaneous and Stimulated Emissions - Einstein's Coefficients - Population Inversion and
Laser Action – components of laser - Types of Lasers - NdYAG, CO2 laser, GaAs Laser Fiber Optics - Principle and
CO3
Propagation of light in optical fiber - Numerical aperture and acceptance angle - Types of optical fibers (material, refractive
index, mode)
SECTION B – CHEMISTRY
UNIT- IV Water and its treatment Periods:08
Water: Sources and impurities, Water quality parameters: Definition and significance of-color, odour, turbidity, pH, hardness,
alkalinity, TDS, COD and BOD. Desalination of brackish water: Reverse osmosis-disadvantages of using hard water in
CO4
boiler - Treatment of boiler feed water: Internal treatment (phosphate, colloidal, sodium aluminate and Calgon conditioning)
and External treatment–Ion exchange demineralization and zeolite process.
UNIT- V Electrochemical Cells and Storage Devices Periods:08

Galvanic cells, single electrode potential, standard electrode potential, electrochemical series. EMF of a cell and its
measurement. Nernst equation. Electrolyte concentration cell. Reference electrodes-hydrogen, calomel andAg/AgCl.
Batteries and fuel cells: Types of batteries - alkaline battery-lead storage battery- nickel-cadmium battery- fuel cell H2 -O2 CO5
fuel cell-applications.
UNIT- VI Corrosion Periods:07

Corrosion –Introduction - factors – types – chemical, electrochemical corrosion (galvanic, differential aeration), corrosion
control – material selection and design aspects – electrochemical protection – sacrificial anode method and impressed
CO6
current cathodic method. Uses of inhibitors, metallic coating – anodic coating, cathodic coating. Metal cladding,
Electroplating of Copper and electroless plating of nickel.
Lecture Periods: 45 Tutorial Periods: - Practical Periods: - Total Periods: 45

Text Books
1. V Rajendran, ―Engineering Physics‖, 2nd Edition, TMH, New Delhi 2011.
2. S.S Dara – ―A text book of Engineering Chemistry‖ - 15th Edition, 2021. S.Chand Publications.
3. C.Jain, Monica Jain, ‖ Engineering Chemistry‖‖ 17thEd. DhanpatRai Pub. Co., NewDelhi, (2015).
Reference Books
1. R.Murugeshan, ―Modern Physics‖, S. Chand &Co, New Delhi 2006.
2. William D Callister Jr., ―Material Science and Engineering‖, 6th Edition, John Wiley and sons, 2009.
3. Jain & Jain ―Engineering chemistry‖, 23rd Edition, DhanpatRai Publishing Company. 2022
4. Mars Fontana ―Corrosion Engineering‖, July 2017
5. JinaRedlin, ―Handbook of Electrochemistry‖, March 28, 2005
Web References
1. https://www.sciencedaily.com/terms/materials_science.htm.
2. https://www.acs.org/content/acs/en/careers/college-to-career/chemistry-careers/materials science.html.
3. https://study.com/academy/lesson/semiconductors-superconductors-definition-properties.html
4. https://mechanicalc.com/reference/engineering-materials
5. http://ndl.ethernet.edu.et/bitstream/123456789/89589/1/%5BPerez_N.%5D_Electrochemistry_and_corrosion%28BookZZ.org%2
9.pdf
Program Specific
COs Outcomes (PSOs)
1 3 2 2 2 - - - - - - - - - - -
2 3 2 3 2 - - - - - - - - - - -
3 3 2 3 2 - - - - - - - - - - -
4 3 1 - - - - - - - - - - - - -
5 3 1 - - - - - - - - - - - - -
Evaluation Methods

Total
Exam (ESE) Marks
Marks 5 5 5 5 5 75 100
Department Computer Science and Engineering Programme : B.Tech.
Semester I Course Category: ES End Semester Exam Type: TE

U23CSTC01
Course Name PROGRAMMING IN C 3 - - 3 25 75 100
(Common to ALL Branches)
Prerequisite Nil
BT Mapping
(Highest Level)
CO1 Comprehend the basics of Computers. K2
Course CO2 Illustrate the concepts of control structures and looping. K2
Outcome CO3 Implement programs using arrays and functions. K3
CO4 Demonstrate programs using Structure and Pointers. K3
CO5 Build the programs using Union and File management Operations. K3
UNIT - I Introduction Periods: 09
Generation and Classification of Computers - Block Diagram of a Computer –Categories of Software – Network Structure -
Number System – Binary – Decimal – Conversion – Algorithm – Pseudo code – Flow Chart CO1
UNIT - II C Programming Basics Periods: 09
Introduction to ‗ C‘ Programming – Basic structure of a ‗C‘ program – compilation and linking processes – Constants,
Variables – Data Types – Expressions using operators in ‗C‘ – Managing Input and Output operations – Decision Making CO2
and Branching – Looping statements.
UNIT - III Arrays and Functions Periods: 09

Arrays – Initialization – Declaration – One dimensional and Two dimensional arrays. String- String operations – String
Arrays. Simple programs- sorting- searching – matrix operations- Function – definition of function – Declaration of function –
Pass by value – Pass by reference – Recursion CO3
UNIT - IV Structure and Pointers Periods: 09

Structure Introduction – Structure definition – Structure declaration – Structure within a structure – Self Referential Structure.
Pointers - Definition – Initialization – Pointers arithmetic – Pointers and arrays -Pointer to Function – Pointer and Structure- CO4
Simple programs.
UNIT - V Unions and Files Periods: 09

Union Introduction - Programs Using Structures and Unions – Introduction to File - File Operations - File Input and Output
Functions - Random Access to Files - File System Functions - Command Line Arguments- Storage Classes - Pre-Processor
CO5
Directives- Dynamic Memory Functions.
Lecture Periods: 45 Tutorial Periods: Practical Periods: - Total Periods: 45

Text Books
th
1. Balagurusamy. E, ―Programming in ANSI C‖, Tata McGraw Hill, 8 Edition, 2019.
2. Yashvant Kanetkar, ―Let us C‖, BPB Publications, 16th Edition, 2017
3. Herbert Schildt,‖ C: The Complete Reference‖, McGraw Hill, FourthEdition, 2014
Reference Books
1. Vikas B. Agarwal Jyoti P. Mirani, ―Computer Fundamentals, Nirali Prakashan Aug-2019,
2. Ashok N Kamthane, ―Computer Programming‖, Pearson education, Second Impression,2012.
3. VikasVerma, ―A Workbook on C ―, Cengage Learning, Second Edition,2012.
4. P.Visu, R.Srinivasan and S.Koteeswaran, ―Fundamentals of Computing and Programming‖, Fourth Edition, Sri Krishna
Publications, 2012.
5. PradipDev, ManasGhoush, ―Programming in C‖, Second Edition, Oxford University Press, 2011.
Web References
1. https://www.programiz.com/c-programming
2. https://www.geeksforgeeks.org/c-language-set-1-introduction/
3. https://www.tutorialspoint.com/cprogramming
4. https://www.assignment2do.wordpress.com/.../solution-programming-in-ansi-c
Program Specific
COs Outcomes (PSOs)
1 2 1 - - 3 - - - - - - - 3 - 3
2 2 1 - - 3 - - - - - - - 3 - 3
3 3 2 1 1 3 - - - - - - - 3 - 3
4 3 2 1 1 3 - - - - - - - 3 - 3
5 3 2 1 1 3 - - - - - - - 3 - 3
Evaluation Methods

Total
Exam (ESE) Marks
Marks 5 5 5 5 5 75 100
Department Civil / Mechanical Programme : B.Tech.

Course Periods / Week Credit Maximum Marks
U23ESTC01
BASICS OF CIVIL AND MECHANICAL
Course Name ENGINEERING 3 - - 3 25 75 100
(Common to ECE, EEE, ICE, MECH, Civil, Mechatronics Branches)

Prerequisite Basic Science
BT Mapping
(Highest Level)
CO1 Understand the types of buildings and materials. K2
CO2 Summarize on the various components of buildings and surveying concepts K2
Course CO3 Identify the various infrastructure facilities K2
Outcome CO4 Familiarize the working principles of IC engines and automobile systems K2
CO5 Understand about the power generation systems and its components K2
CO6 Acquire knowledge about the various machining process. K2
SECTION A - CIVIL ENGINEERING
UNIT - I Buildings and Buildings Materials Periods: 08
Buildings – Definition – Classification according to NBC-plinth area, Floor area, carpet area, floor space index -
Development of Smart cities - Green building, Benefits from green building. Building Materials - stone, brick, cement, CO1
cement mortar, concrete, steel, Timber - their properties and uses
UNIT - II Buildings Components and Surveying Periods: 08

Various Buildings Components and their functions. Foundation: function and types - Brick masonry, Stone Masonry and its CO2
types – Floors, Roofs and its types. Surveying: Objects – Classification – Principles – Measurements of Distances and
areas –Leveling
UNIT - III Basic Infrastructure Periods: 07

Roads and Bridges – types, components advantage and disadvantages. Railways - Permanent way and its elements.
Sources of Water - Quality of Water- Domestic sewage Treatment – Rain Water harvesting – Dams - site selection for dam CO3
construction, types of dams.
SECTION B – MECHANICAL ENGINEERING

UNIT- IV Internal and External Combustion Systems Periods: 08
IC engines – Classification – Working principles – Diesel and Petrol Engines: Two stroke and four stroke engines – merits
and demerits.
CO4
Steam generators (Boilers) – Classification – Constructional features (of only low-pressure boilers) – Boiler mountings and
accessories – Merits and demerits – Applications.
UNIT- V Power Generation Systems, Refrigeration and Air Conditioning System Periods: 07
Power plants: Thermal – Nuclear, Hydraulic, Solar, Wind, Geothermal, Wave, Tidal and Ocean Thermal Energy Conversion
systems - Functions, Applications - Schemes and layouts (Description only)
Refrigeration and Air Conditioning System: Terminology of Refrigeration and Air Conditioning. Principle of vapour CO5
compression and absorption system – Layout of typical domestic refrigerator – Window and Split type room Air conditioner.
UNIT- VI Manufacturing Process Periods: 07

Lathe - types, Specifications, Operations of a centre lathe. Casting - Pattern making, Allowances, Green sand and dry sand
moulding, casting defects. Welding - Arc and Gas welding process, brazing and soldering (process description only). CO6

Text Books
1. Dr. S. Jayakumar, ―Basic Civil Engineering‖, Aagash Nekaa Publications, 2011
2. G Shanmugam, MS Palanichamy, Basic Civil and Mechanical Engineering, McGraw Hill Education, 1st Edition, 2018.
3. Palanikumar, K. Basic Mechanical Engineering, ARS Publications, 2010.
Reference Books
1. M.P. Poonia, S.C. Sharma and T.R. Banga, Basic Mechanical Engineering, Khanna Publishing House 2018.
2. S.S.Bhavikatti, Basic Civil engineering, New Age International Ltd. 2018.
3. V. Rameshbabu, Basic Civil & Mechanical Engineering, VRB Publishers Private Limited, January 2017.
4. Serope Kalpakjian, Steven Schmid, Manufacturing Engineering and Technology, 7th Edition, Pearson Publication, 2014.
5. Gopi Satheesh, Basic Civil engineering, Pearson Publications, 3rd Edition, 2015.
Web References
1. https://nptel.ac.in/courses/112107291/
3. https://ocw.mit.edu/courses/mechanical-engineering/2-61-internal-combustion-engines-spring-2017/ lecture-notes/
Program Specific
COs Outcomes (PSOs)
1 3 1 1 - 1 - - - - - - 1 - - -
2 3 1 1 - 1 - - - - - - 1 - - -
3 3 1 1 - 1 - - - - - - 1 - - -
4 3 1 - - - - - - - - - 1 - - -
5 3 1 - - - - - - - - - 1 - - -
Evaluation Methods

Total
Exam (ESE) Marks
Marks 5 5 5 5 5 75 100
Department Mechanical Engineering Programme : B.Tech.

U23ESTC02
Course
ENGINEERING MECHANICS 2 1 - 3 25 75 100
Name
(Common to EEE, ECE, MECH, CIVIL, Mechatronics Branches)
Prerequisite Engineering Physics
BT Mapping
(Highest Level)
CO1 Recognize the basics of equilibrium of particles in 2D and 3D K2
Course
CO2 Review the requirements of equilibrium of rigid bodies in 2D and 3D. K2
Outcome CO3 Solve problem related to friction force. K3
CO4 Compute the center of mass and moment of inertia of surfaces and solids. K3
CO5 Predict displacement, velocity and acceleration of dynamic particles. K3
UNIT- I Basics and Statics of Particles Periods: 09
Introduction - Units and Dimensions - Vectorial representation of forces and moments – Coplanar Forces - Lami‘s theorem,
Parallelogram and triangular Law of forces -Resolution of forces - Equilibrium of a particle - Principle of transmissibility - CO1
Equivalent system of force - Free body diagram
UNIT- II Equilibrium of Rigid Bodies Periods: 09

Types of supports and their reactions -requirements of stable equilibrium - Moments and Couples - Moment of a force about
a point and about an axis -Vectorial representation of moments and couples - Scalar components of a moment - Varignon‘s
theorem -Equilibrium of Rigid bodies in two dimensions – Forces in space -Equilibrium of a particle in space - CO2
Equivalent systems of forces - Equilibrium of Rigid bodies in three dimensions (Descriptive only).
UNIT - III Structural Analysis of Trusses and Friction Periods: 09

Trusses - Definition of a truss - Simple Trusses - Analysis of Trusses - Method of joints - Method of sections - Friction force -
Laws of sliding friction - equilibrium analysis of simple systems with sliding friction -wedge friction- Rolling resistance. CO3
UNIT - IV Properties of Surfaces and Solids Periods: 09

Determination of centroid of areas, volumes and mass - Pappus and Guldinus theorems - moment of inertia of plane and
areas- Parallel axis theorem and perpendicular axis theorem, radius of gyration of area- product of inertia- mass moment of CO4
inertia.
UNIT - V Dynamics of Particles Periods: 09

Displacements, Velocity and acceleration, their relationship - Relative motion - Curvilinear motion - Newton‘s law - Work
Energy Equation of particles -Impulse and Momentum -Impact of elastic bodies. CO5
Lecture Periods: 30 Tutorial Periods: 15 Practical Periods: - Total Periods: 45

Text Books
1. Beer, and Johnston Jr. E.R. ―Vector Mechanics for Engineers‖, McGraw-Hill Education India Pvt Ltd., 11th Edition, 2016.
2. J.L. Meriam & L.G. Karidge, Engineering Volume I and Engineering Mechanics: Dynamics, 8th edition, Wiley student edition,
2016.
3. R.C, Hibbeller, ―Engineering Mechanics‖, Prentice Hall, 14th edition, 2016.
Reference Books
1. Arthur P. Boresi and Richard J. Schmidt, ―Engineering Mechanics: Statics and Dynamics‖, Thomson Asia Private Limited,
Singapore, 2010.
2. D.P.Sharma ―Engineering Mechanics‖, Dorling Kindersley India Pvt. Ltd, New Delhi, 2010
3. S.Rajasekaran, Sankarasubramanian, G., Fundamentals of Engineering Mechanics, Vikas Publishing House Pvt., Ltd., 2012.
4. S.S.Bhavikatti and K.G. Rajashekarappa, Engineering Mechanics, New Age International(P) Ltd, New Delhi, 7th Edition, 2019.
5. Dr.I.SGujral, ―Engineering Mechanical‖ second edition, Lakshmi Publication (P), Ltd., 2011.
Web References
1. http://nptel.iitm.ac.in/video.php?subjectId=112103108
2. http://www.nptel.iitm.ac.in/courses/Webcourse-contents/IIT-KANPUR/Engineeringmechanics/Table of Contents.html
4. https://www.coursera.org/learn/engineering-mechanics-statics
Program Specific
COs Outcomes (PSOs)
1 3 2 2 3 - - - - - - - 1 2 - 2
2 3 2 2 3 - - - - - - - 1 2 - 2
3 3 2 2 3 - - - - - - - 1 2 - 2
4 3 2 2 3 - - - - - - - 1 2 - 2
5 3 2 2 3 - - - - - - - 1 2 - 2
Evaluation Methods
Continuous Assessment Marks (CAM) End Semester Total

Assessment Examination
CAT 1 CAT 2 Model Exam Assignment* Attendance Marks
(ESE) Marks
Marks 5 5 5 5 5 75 100
Department English Programme : B.Tech.

Semester I Course Category: HS End Semester Exam Type: TE
U23ENBC01
Course
COMMUNICATIVE ENGLISH - I 2 - 2 3 50 50 100
Name
(Common to ALL Branches except CSBS)
Prerequisite Basics of English Language
On completion of the course, the students will be able to BT Mapping

(Highest Level)
CO1 Understand the communication flow in organization and its objectives K2
Course CO2 Write the technical contents with grammatically precise sentences K2
Outcome CO3 Articulate with correct pronunciation and overcome vernacular impact in speaking K3
CO4 Express opinions confidently in formal and informal communicative contexts K2
CO5 Attend interview with assertiveness K3
UNIT- I Workstead Communication Periods: 10
Communication, Definition, Process, Channels, Barriers, Strategies for Effective Communication, Verbal and Nonverbal
Communication - Listening, Types, Barriers, Enhancing Listening Skills - Bibliography: Book, Journal and Internet CO1
References
UNIT- II Common Errors In Writing And Comprehension Strategies Periods: 10

Subject Verb Agreement, Misplaced Modifiers, Squinting Modifiers, Dangling Modifier, Fused Sentence, Comma Splice,
Sentence Fragment - Reading Comprehension: Technical passage, Strategies: Skimming, Scanning, Intensive and CO2
Extensive Reading, Prediction, and Contextual Meaning
UNIT- III Phonetics Periods: 10

Pronunciation Guidelines to consonants and vowels, Sounds Mispronounced, Silent and Non-silent Letters, Intonation,
Spelling Rules and Words often misspelled, Mother Tongue Influence (MTI), Various Techniques for Neutralization of Mother
Tongue CO3
UNIT- IV Communication Practice - I Periods: 15

List of Exercises
Listening: Self Introduction videos
Speaking: Self-Introduction, Extempore, and Role Play CO4
Reading: Non-Technical Comprehension Passage
Writing: Common Errors in Writing
UNIT- V Interpersonal Communication - I Periods: 15

List of Exercises
Listening: Speech Sounds, Interview Videos
Speaking: Debate, Structured Group Discussion, and Conversation CO5
Reading: Commonly Confused Words
Writing: Transcription
Lecture Periods: 30 Tutorial Periods: - Practical Periods: 30 Total Periods: 60

Text Books
1. Richa Mishra , RatnaRao, ―A textbook of English Language Communication Skills‖, Macmillan Publishers India Private Ltd.,
Revised Edition 2021.
2. Rizvi M. Ashraf, ―Effective Technical Communication‖, New Delhi: Tata-McGraw-Hill Publishing Company Limited, 4th Edition,
2010.
3. Balasubramanian T, ―English Phonetics for Indian students workbook‖, 2nd Edition, Trinity Press, 2016.
Reference Books
1. N.P.Sudharshana, C. Savitha,‖ English for Engineers‖, Cambridge University Press, 2018.
2. Raman, Meenakshi, and Sharma, Sangeetha, ―Technical Communication - Principles and Practice‖, 3rd Edition, Oxford University
Press, 2017.
3. Comfort, Jeremy,etal., ―Speaking Effectively: Developing Speaking Skills for Business English‖, Cambridge University Press,
Cambridge, Reprint 2011.
4. Wren & Martin, ―High School English Grammar and Composition‖, S Chandh &Co. Ltd, 2015.
5. Boove, Courtland L, ―Business Communication Today‖, Pearson Education, New Delhi, 2002.
Web References
1. https://lemongrad.com/subject-verb-agreement-rules/
2. https://opentextbc.ca/advancedenglish/chapter/misplaced-and-dangling-modifiers/
3. https://www.hitbullseye.com/Reading-Comprehension-Tricks.php
4. https://www.softwaretestinghelp.com/how-to-crack-the-gd/
5. https://worldscholarshipvault.com/neutralize-mother-tongue-interference/
Program Specific
COs Outcomes (PSOs)
1 1 - - - - - - - - 3 - 1 - - -
2 1 - - - - - - - - 3 - 1 - - -
3 1 - - - - - - - - 3 - 1 - - -
4 1 - - - - - - - - 3 - 1 - - -
5 1 - - - - - - - 1 3 - 1 - - -
Evaluation Methods
Theory
Assessment Model Exam Examination (ESE) Total Marks
CAT 1 CAT 2 Attendance
Marks
75
5 5 5 5
Marks 60
(to be weighted for 50
20 ( to be weighted for 10 marks)
marks)
Practical
Continuous Assessment Internal Evaluation End Semester Internal Evaluation Total Marks
30 (to be weighted for 10 marks) 30 marks
Listening (L)* 10 Listening (L)* 10
40
Speaking(S) 5 Speaking(S) 5
Reading(R)* 10 Reading(R)* 10
Writing(W)* 5 Writing(W)* 5
 LRW components of Practical can be evaluated through Language Lab Software
Department Mechanical Programme : B.Tech.

Semester I Course Category: ES End Semester Exam Type: LE
Code U23ESPC03 L T P C CAM ESE TM
Course ENGINEERING GRAPHICS USING
- - 2 1 50 50 100
Name AUTOCAD
(Common to all Branches)
Prerequisite Nil
(Highest Level)
CO1 Familiarize with the fundamentals and standards of engineering graphics. K3
Course CO2 Perform drawing of basic geometrical constructions and multiple views of objects. K2
Outcome CO3 Visualize the isometric and perspective sections of simple solids. K3
CO4 Connect side view associate on front view. K4
CO5 Correlate sectional views and lateral surface developments of various solids. K4
List of Experiments
1. Study of capabilities of software for Drafting and Modeling – Coordinate systems (absolute, relative, polar, etc.) – Creation of
simple figures like polygon and general multi-line figures.
2. Drawing a Title Block with necessary text and projection symbol.
3. Drawing 2D sketch by applying modify tools like fillet, mirror, array, etc.,
4. Drawing front view and top view of simple solids like prism, pyramid, cylinder, cone, etc., and Dimensioning.
5. Drawing front view, top view and side view of objects from the given pictorial views (eg. Simple stool, V-block, Mixie Base).
6. Drawing a plan of residential building (Two bed rooms, kitchen, hall, etc.)
7. Drawing sectional views of prism, pyramid, cylinder, cone, etc,
8. Drawing lateral surface development of prism, pyramid, cylinder, cone, etc,
9. Drawing isometric projection of simple objects.
10. Creating 3D model of simple object and obtaining 2D multi-view drawings.
11. Note: Plotting of drawings must be made for each exercise and attached to the records written by Students.
Lecture Periods: - Tutorial Periods: - Practical Periods: 30 Total Periods: 30

Reference Books
1. James D. Bethune, Engineering Graphics with AutoCAD A Spectrum book 1st Edition, Macromedia Press, Pearson, 2020.
2. NS Parthasarathy and Vela Murali, Engineering Drawing, Oxford university press, 2015.
3. M.B Shah, Engineering Graphics, ITL Education Solutions Limited, Pearson Education Publication, 2011.
4. Bhatt N.D and Panchal V.M, Engineering Drawing: Plane and Solid Geometry, Charotar Publishing House, 2017.
5. Jeyapoovan T, Engineering Drawing and Graphics Using AutoCAD, Vikas Publishing House Pvt Ltd., 7th Edition, New Delhi,
2016.
6. C M Agrawal, Basant Agrawal, Engineering Graphics, McGraw Hill, 2012.
7. Dhananjay A. Jolhe, Engineering Drawing: With An Introduction To CAD McGraw Hill, 2016.
8. James Leach, AutoCAD 2017 Instructor, SDC Publications, 2016.
Web References
1. http://vlabs.iitb.ac.in/vlabs-dev/labs/mit_bootcamp/egraphics_lab/labs/index.php
2. http://www.nptelvideos.in/2012/12/computer-aided-design.html
3. https://mech.iitm.ac.in/meiitm/course/cad-in-manufacturing/
4. https://autocadtutorials.com
5. https://dwgmodels.com
Program Specific
COs Outcomes (PSOs)
1 3 1 - - 3 - - - 3 - - 2 3 3 3
2 3 1 - - 3 - - - 3 - - 3 3 3 3
3 3 1 - - 3 - - - 3 - - 3 3 3 3
4 3 1 - - 3 - - - 3 - - 2 3 3 3
5 3 1 - - 3 - - - 3 - - 3 3 3 3
Evaluation Methods
Continuous Assessment Marks (CAM)

Performance in practical End Semester
classes Model Total
Practical Attendance Marks
(ESE) Marks
Conduction Record Examination
viva
of practical work
Marks 15 5 5 15 10 50 100
Department Mechatronics Programme: B.Tech.

Code U23CSPC01 L T P C CAM ESE TM
Course
PROGRAMMING IN C LABORATORY - - 2 1 50 50 100
Name
(Common to All Branches)
Prerequisite Nil
(Highest Level)
CO1 Implement logical formulations to solve simple problems leading to specific applications. K3
Execute C programs for simple applications making use of basic constructs, arrays and K3
Course CO2
strings.
Outcome
CO3 Experiment C programs involving functions, recursion, pointers, and structures. K3
CO4 Demonstrate applications using sequential and random access file processing. K3
CO5 Build solutions for online coding challenges. K3
List of Experiments
1. Write a C program to find the Area of the triangle.
2. Develop a C program to read a three digit number and produce output like
1 hundreds
7 tens
2 units
For an input of 172.

3. Write a C program to check whether a given character is vowel or not using Switch – Case statement.
4. Write a C program to Print the numbers from 1 to 10 along with their squares.
5. Demonstrate do—While loop in C to find the sum of ‗n‘ numbers.
6. Find the factorial of a given number using Functions in C.
7. Write a C program to check whether a given string is palindrome or not?
8. Write a C program to check whether a value is prime or not?
9. Develop a C program to swap two numbers using call by value and call by reference.
10. Construct a C program to find the smallest and largest element in an array.
11. Implement matrix multiplication using C program.
12. Write a C program to perform various string handling functions like strlen, strcpy, strcat, strcmp.
13. Develop a C program to remove all characters in a string except alphabets.
14. Write a C program to find the sum of an integer array using pointers.
15. Write a C program to find the Maximum element in an integer array using pointers.
16. Construct a C program to display Employee details using Structures
17. Write a C program to display the contents of a file on the monitor screen.
18. Write a File by getting the input from the keyboard and retrieve the contents of the file using file operation commands.
19. Write a C program to create two files with a set of values. Merge the two file contents to form a single file
20. Write a C program to pass the parameter using command line arguments.

Reference Books
1. Zed A Shaw,‖ Learn C the Hard Way: Practical Exercises on the Computational Subjects You Keep Avoiding (Like C)‖, Addison
Wesley,2016.
2. Anita Goel and Ajay Mittal,‖ Computer Fundamentals and programming in C‖, Pearson Education, First edition, 2011.
th
3. Maureen Sprankle, Jim Hubbard,‖ Problem Solving and Programming Concepts,‖ Pearson,9 Edition, 2011.
th
4. Yashwanth Kanethkar, ―Let us C‖, BPB Publications,13 Edition,2008.
nd
5. B.W.Kernighan and D.M. Ritchie, ―The C Programming Language‖, Pearson Education, 2 Edition, 2006.
Web References
1. https://alison.com/course/introduction-to-c-programming
2. https://www.geeksforgeeks.org/c-programming-language/
3. http://cad-lab.github.io/cadlab_data/files/1993_prog_in_c.pdf
4. https://www.tenouk.com/clabworksheet/clabworksheet.html
5. https://fresh2refresh.com/c-programming/
Program Specific
COs Outcomes (PSOs)
1 2 1 - - 3 - - - - - - - 3 - 3
2 2 1 - - 3 - - - - - - - 3 - 3
3 3 2 1 1 3 - - - - - - - 3 - 3
4 3 2 1 1 3 - - - - - - - 3 - 3
5 3 2 1 1 3 - - - - - - - 3 - 3
Evaluation Methods

End
Performance in practical classes Model Semester Total
Assessment
Practical Attendance Examination Marks
Conduction Record (ESE) Marks
viva Examination
of practical work
Marks 15 5 5 15 10 50 100
Department Mechanical Engineering Programme : B.Tech.

Code U23ESPC02 L T P C CAM ESE TM
Course
DESIGN THINKING AND IDEA LAB - - 2 1 50 50 100
Name
(Common to ALL Branches)
Prerequisite Basic Knowledge of Science
(Highest Level)
Demonstrate a comprehensive understanding of the tools and inventory associated with
CO1 K2
the IDEA Lab.
Develop proficiency in ideation techniques to generate creative and innovative solutions for
CO2 K3
various design challenges and problems
Acquire practical knowledge of mechanical and electronic fabrication processes, including
Course
CO3 hands-on experience with machinery, tools, and techniques used in the manufacturing and K3
Outcome assembly of physical components.
Cultivate the skills necessary for developing innovative and desirable products, including
CO4 the ability to integrate user needs, market trends, and technological advancements into the K4
design process.
Apply iterative design methodologies to refine and improve solutions based on feedback,
CO5 K4
user testing, and evaluation of functional, aesthetic, and usability aspects
Design process: Traditional design, Design thinking, Existing sample design projects, Study on designs around us,
Compositions/structure of a design, Innovative design: Breaking of patterns, Reframe existing design problems, Principles of
creativity Empathy: Customer Needs, Insight-leaving from the lives of others/standing on the shoes of others, Observation
Design team-Team formation, Conceptualization: Visual thinking, Drawing/sketching, New concept thinking, Patents and
Intellectual Property, Concept Generation Methodologies, Concept Selection, Concept Testing, Opportunity identification
Prototyping: Principles of prototyping, Prototyping technologies, Prototype using simple things, Wooden model, Clay model, 3D
printing; Experimenting/testing.
Sustainable product design, Ergonomics, Semantics, Entrepreneurship/business ideas, Product Data Specification, Establishing
target specifications, Setting the final specifications. Design projects for teams.
List of Lab Activities and Experiments

1. Schematic and PCB layout design of a suitable circuit, fabrication and testing of the circuit.
2. Machining of 3D geometry on soft material such as softwood or modelling wax.
3. 3D scanning of computer mouse geometry surface. 3D printing of scanned geometry using FDM or SLA printer.
4. 2D profile cutting of press fit box/casing in acrylic (3 or 6 mm thickness)/cardboard, MDF (2 mm) board using laser cutter &
engraver.
5. 2D profile cutting on plywood /MDF (6-12 mm) for press fit designs.
6. Familiarity and use of welding equipment.
7. Familiarity and use of normal and wood lathe.
8. Embedded programming using Arduino and/or Raspberry Pi.
9. Design and implementation of a capstone project involving embedded hardware, software and machined or 3D printed
enclosure.
10. Discussion and implementation of a mini project.
11. Documentation of the mini project (Report and video).

Text Books
1. Tim Brown, Change by Design: How Design Thinking Transforms Organizations and Inspires Innovation, HarperCollins
Publishers Ltd
2. Workshop / Manufacturing Practices (with Lab Manual), Khanna Book Publishing.
Reference Books
1. Ulrich and Eppinger, Product Design and Development, 3rd Edition, McGraw Hill, 2004
2. The Big Book of Maker Skills: Tools & Techniques for Building Great Tech Projects. Chris Hackett. Weldon Owen; 2018.
3. The Total Inventors Manual (Popular Science): Transform Your Idea into a Top-Selling Product. Sean Michael Ragan, Weldon
Owen; 2017.
4. The Art of Electronics. 3rd edition. Paul Horowitz and Winfield Hill. Cambridge University Press.
5. Practical Electronics for Inventors. 4th edition. Paul Sherz and Simon Monk. McGraw Hill.
6. Make Your Own PCBs with EAGLE: From Schematic Designs to Finished Boards. Simon Monk and Duncan Amos. McGraw Hill
Education.
7. Programming Arduino: Getting Started with Sketches. 2nd edition. Simon Monk. McGraw Hill.
8. Venuvinod, PK., MA. W., Rapid Prototyping – Laser Based and Other Technologies, Kluwer
9. Chapman W.A.J, ―Workshop Technology‖, Volume I, II, III, CBS Publishers and Distributors, 5th Edition,2002.
Web References
1. https://onlinecourses.nptel.ac.in/noc23_mg72
Program Specific
COs Outcomes (PSOs)
1 3 2 2 2 2 2 - - 2 - 3 2 - - -
2 3 3 3 2 2 2 - - 2 - 3 2 - - -
3 3 3 3 2 3 2 - - 2 - 3 2 - - -
4 3 3 3 2 3 2 - - 2 - 3 2 - - -
5 3 3 3 2 3 2 - - 2 - 3 2 - - -
Evaluation Methods

End Semester
Performance in Practical classes Total
Assessment Examination (ESE)
Model Practical Marks
Attendance Marks
Conduction of Record Examination
viva
Practical work
Marks 15 5 5 15 10 50 100
Department Mechatronics Programme: B.Tech.

Semester I Course Category: MC End Semester Exam Type: -
Periods / Week Credit Maximum Marks
Course Code U23MEMC01 L T P C CAM ESE TM
Course Name INDUCTION PROGRAMME - - - Non-Credit - - -
Prerequisite -
BT Mapping
The course will enable the student to (Highest
Course Level)
Outcome CO1 Develop holistic attitude and harmony in the individual, family, and Society K2
CO2 K2
Acquire grammar skills and capable to write and speak English confidently
CO3 Understand the basic concepts in Mathematics and Programming K2

CO4 Know about the art and culture, language and literature of this vast secular nation K2
CO5 Identify the inherent talent and develop it professionally K3
UNIT- I Universal Human Values Periods: 12
Welcome and Introductions - Getting to know each other, Aspirations and Concerns - Individual Academic and Career,
Expectations of Family, Peers, Society, Nation, Fixing one‘s Goals, Self-Management - Self-confidence, Peer Pressure, Time
Management, Anger, Stress Personality Development, Self-improvement, Health - Health issues, Healthy diet, Healthy CO1
lifestyle, Hostel life, Relationships - Home sickness, Gratitude towards Parents, Teachers and others Ragging and interaction,
Competition and Cooperation, Peer Pressure, Society - Participation in Society, Natural Environment - Participation in Nature,
Sum Up - Role of Education, Need for a Holistic Perspective, Self-evaluation and Closure - Sharing and feedback.
UNIT- II Proficiency in English Periods: 12

Communication skills - Prognostic test on Grammar - Synonyms, Antonyms, Tenses, Sentence Completion, Idioms a n d
Phrases, One- word Substitution, Homophones, Homonyms, Use of Prepositions, Subject-verb CO2
Agreement - Writing - Paragraph writing, Letter writing, Essay writing, Story Development.
UNIT- III Bridge Course in Mathematics and C Programming Periods: 12
Mathematics:
Fundamentals of differential and integral calculus: Theory and Practice, Limit of function - Fundamental results on limits -
Continuity of a function - Concept of differentiation - Concept of derivative - Slope of a curve -Differentiation Techniques -
Derivatives of elementary functions from first principle - Derivatives of inverse functions - Logarithmic differentiation - Method
of substitution - Differentiation of parametric functions -Differentiation of implicit functions - Higher order derivatives. Integrals
of functions containing linear functions -Method of integration (Decomposition method, method of substitution, integration by
parts) - Definite integrals. Simple definite integrals - Properties of Definite integrals - Reduction formulae - Area and CO3
volume - Length of curve - surface area of a solid.
C Programming:
Features of C and its basic Structure - Keywords - constants - variables - operators - Data types - Formatted input and output
statements - Control and Looping statement - Arrays - Functions - Strings - writing simple C programs.
UNIT- IV Literary activities Periods: 12

Team building activities - Quiz - Oral Exercises - Group discussion, Debate, Extempore, Role play,
CO4
- .
UNIT- V Creative arts Periods: 12
Introduction to painting a n d renowned artworks - Documentary a n d Short films - Music - Vocal, Instrumental - Dance -
Classical, Cinematic - Mimicry - Mime. CO5

Reference Books
1. R.R Gaur, R. Asthana, G.P. Bagaria,‖ A Foundation Course in Human Values and Professional Ethics‖, Excel Books, New Delhi,
nd
2 Revised Edition, 2019.
2. Kumar Mohan R, ―English Grammar for all (Functional and Applied Grammar)‖, Unicare Academy, 2022.
3. Seely, John,‖ Oxford A-Z of Grammar and Punctuation, Oxford Publication, 2013.
th
4. B.V. Ramana,‖ Higher Engineering Mathematics‖, Tata McGraw – Hill, New Delhi, 6 Edition, 2018.
5. Dr. A. Singaravelu, ―Engineering Mathematics - I‖, Meenakshi publications, Tamil Nadu, 2019.
th
6. E. Balagurusamy, "PROGRAMMING IN ANSI C", Mc Graw Hill, 8 Edition, 2019.
7. Dr.K.K.Pillay,‖Social Life of Tamils‖, A joint publication of TNTB & ESC and RMRL
st
8. R.Balakrishnan, ―Journey of Civilization‖,Roja muthiah research publishers, 1 Edition 2019
9. - , , . ., :
, 2002.
10. - இ . , .
11. - ,
Web References
1. http://www.newsociety.com/Books/S/Slow-isBeautiful
2. https://www.aplustopper.com/formal-letter/
3. https://www.javatpoint.com/c-programming-language-tutorial
4. http://www.math.cum.edu/~wn0g/2ch6a.pdf
5. https://education.nsw.gov.au/teaching-and-learning/curriculum/creative-arts
SEMESTER II
Department Mathematics Programme : B.Tech.

Semester II Course Category: BS End Semester Exam Type: TE
U23MATC02
Course Name ENGINEERING MATHEMATICS – II 3 1 - 4 25 75 100
(Common to ALL Branches Except CSBS, FT)
Prerequisite Basic Mathematics
BT Mapping
(Highest Level)
CO1 Convert a periodic function into series form. K2
Course CO2 Compute Fourier transforms of various functions. K3
Outcome CO3 Solve Differential Equations using Laplace transforms. K3
CO4 Apply inverse Laplace transform of simple functions. K3
CO5 Solve difference equations using Z – transforms. K3
UNIT - I Fourier Series Periods:12
Dirichlet‘s conditions – General Fourier series – Odd and Even functions – Half-Range sine series and cosine series –
CO1
Change of intervals – Parseval‘s Identity.
UNIT - II Fourier Transforms Periods:12
Fourier Transforms and its inverse – Properties of Fourier Transform (without proof) – Fourier sine and cosine Transforms
CO2
and their properties (excluding proof).
UNIT - III Laplace Transforms Periods:12
Laplace transforms of elementary functions and Periodic functions – Basic properties (excluding proof) – Laplace transforms
CO3
of derivatives and integrals – Initial and final value theorems.
UNIT - IV Inverse Laplace Transforms Periods:12
Definition of inverse Laplace Transforms – Convolution theorem (excluding proof) – Solutions of Linear Ordinary Differential
Equations of second order with constant coefficients. CO4
UNIT - V Z – Transforms Periods:12

Z-transforms – Elementary Properties – Inverse Z-transforms (using partial fraction and Residues) – Solution of difference
CO5
equations using Z - transform.
Lecture Periods:45 Tutorial Periods: 15 Practical Periods: - Total Periods: 60

Text Books
rd
1. T. Veerarajan, ―Engineering Mathematics‖, Tata McGraw Hill, New Delhi, 3 Edition, 2011.
2. C. P. Gupta, Shree Ram Singh. M. Kumar, ―Engineering Mathematics for semester I & II‖, Tata McGraw Hill, New
nd
Delhi, 2 Edition, 2016.
nd
3. H.K. Dass, ―Advanced Engineering Mathematics‖, S. Chand, New Delhi, 22 Edition 2019.
Reference Books
th
1. N.P. Bali and Dr. Manish Goyal, ―A Textbook of Engineering Mathematics‖, University Science Press, India, 8 Edition, 2016.
st
2. P. Sivaramakrishna Das and C. Vijayakumari, ―Engineering Mathematics‖, Pearson India Education services Pvt. Ltd, India 1
2017.
th
3. Erwin Kreyszig, ―Advanced Engineering Mathematics‖, John Wiley & Sons, New Delhi, 10 Edition, 2019.
th
4. G. Balaji, ―Engineering Mathematics - Transforms and Partial Differential Equations‖, G. Balaji Publishers, 18 Edition, 2022.
5. B.V. Ramana, ―Higher Engineering Mathematics‖, Tata McGraw Hill, New Delhi, 2017.
Web References
3. https://nptel.ac.in/courses/11110711
4. https://swayam.gov.in/nd1_noc20_ma17/preview
Program Specific
COs Outcomes (PSOs)
1 3 2 2 - - 1 - - - - - 1 1 - -
2 3 2 1 1 - 1 - - - - - 1 3 - -
3 3 2 1 1 - 1 - - - - - 1 3 - -
4 3 2 1 1 - 1 - - - - - 1 3 - -
5 3 2 1 1 - 1 - - - - - 1 3 - -
Evaluation Methods

Total
Exam (ESE) Marks
Marks 5 5 5 5 5 75 100
Department EEE and ECE Programme : B.Tech.
Semester II Course Category: ES End Semester Exam Type: TE
U23ESTC03
Course BASICS OF ELECTRICAL AND
3 - - 3 25 75 100
Name ELECTRONICS ENGINEERING
(Common to CSE, IT, MECH, CIVIL, MCTR, CCE, AI&DS, FT and CSBS Branches)
Prerequisite Mathematics and Physics
BT Mapping
(Highest Level)
CO1 Apply the basic concepts and various laws in DC circuits. K3
Analyze the AC circuits and develop resonance conditions for transmitter and receiver
CO2 K3
circuits.
Course Gain the knowledge of power system components, importance of electrical safety
CO3 K2
Outcome measures and real time applications of transformer and motor.
CO4 Understand the operator of semiconductor diode and its applications. K2
CO5 Explain the characteristics and operation of BJT and FET. K2
CO6 Relate and Explain Different Communication Systems. K2
SECTION A - Electrical Engineering
UNIT- I DC Circuits Periods: 08
Concept of Potential Difference, Current, Resistance, Inductance and Capacitance, Work, Power, Energy, Current and
Voltage sources - ideal and practical sources - concept of dependent and independent sources, Ohm‘s law, Kirchhoff‘s law,
Series parallel combination of R, L, C components, Voltage Divider and Current Divider Rules, Mesh and Nodal analysis, CO1
Star/Delta transformation, Network Theorems - Superposition, Thevenin, Norton and Maximum Power Transfer.
UNIT- II AC Circuits Periods: 08

AC waveform definitions - form factor, peak factor, R-L, R-C, RLC series circuit, R-L-C parallel circuit, phasor representation
in polar and rectangular form, concept of impedance, admittance, active, reactive, apparent and complex power, power
factor, Resonance in series and parallel circuits, band-width and quality factor, Three Phase balanced AC Circuits (Y-∆ and CO2
Y-Y) - Power Measurement – Two Wattmeter method.
UNIT- III Electrical Safety and Electrical Machines Periods: 07

Layout of electrical power system and its functions, Wiring Accessories, Types of domestic wiring, Necessity of earthing,
insulators and cables, Safety devices - fuse, relay and circuit breaker - Sensors and its types.
Faraday‘s Law of electromagnetic induction, Fleming‘s Right and Left hand rule - DC Generator and DC Motor - CO3
construction, principle, load test and performance characteristics - Auto transformer, Single phase transformer- construction,
principle, load test - Single phase capacitor start and run induction motor – Load test.
SECTION B – Electronics Engineering

UNIT- IV Semiconductor Diodes and Applications Periods: 07
Introduction semiconductor materials – Doping - Intrinsic and Extrinsic Semiconductor – PN junction diode, structure,
characteristics - diffusion and depletion capacitance - Rectifier, Half wave and Full wave rectifier - zener diode CO4
characteristics - zener diode as regulator – Light Emitting Diode (LED) - Solar Cell.
UNIT- V Transistors Periods: 07

Bipolar Junction Transistor - construction – operation - Common Base, Common Emitter, Common collector Configuration –
characteristics – Biasing - numerical application. Junction Field Effect Transistor (JFET), Metal oxide semiconductor Field CO5
Effect Transistor, EMOSFET-DMOSFET operation characteristics - Numerical application.
UNIT- VI Communication systems Periods: 08

Need for Modulation – Block diagram of analog communication System - AM, FM, PM Definitions and Waveforms –
Comparison of digital and analog communication system- Block diagram of digital communication system –
Electromagnetic Spectrum. Wired and wireless Channel – Block diagram of communication systems – satellite CO6
communication – Cellular Mobile Communication – Fibre Optical Communication System.
Text Books
1. R. K. Rajput, ―Basic Electrical and Electronics Engineering‖, University Science Press, 2nd Edition, 2017.
2. Dr. R. Saravanakumar, Dr.V. Jegathesan, Dr. K. Vinoth Kumar, Dr. K. Kowsalya, ―Basic Electrical and Electronics Engineering‖,
nd
Wiley Publisher, 2 Edition, 2022.
3. R. Muthusubramaniam, S. Salivahanan and K. A. Mureleedharan, ―Basic Electrical Electronics and Computer Engineering‖, Tata
McGraw Hill, 2018
Reference Books
1. A. Sudhakar and S. P. Shyam Mohan, ―Circuits and Networks: Analysis and Synthesis‖, Tata McGraw Hill Publishing Company
th
Ltd., New Delhi, 4 Edition, 2017.
2. D.P.Kothari and I.J. Nagrath, ―Electric Machines‖, Tata McGraw Hill, New Delhi, 5th Edition, 2017.
3. B. L. Theraja, A. K. Theraja, ―A Textbook of Electrical Technology – Volume - II‖, S Chand & Co. Ltd., New Delhi, 23rd Edition,
2009.
4. David. A. Bell, ―Electronic Devices and Circuits‖, PHI Learning Private Ltd, India, Fourth Edition, 2020
5. Wayne Tomasi, ―Electronic Communication Systems- Fundamentals Theory Advanced‖, Sixth Edition, Pearson Education, 2018.
Web References
2. https://www.electrical4u.com/
4. https://onlinecourses.nptel.ac.in/noc21_ee55/
5. https://nptel.ac.in/courses/117/102/117102059
Program Specific
COs Outcomes (PSOs)
1 3 3 3 - 2 - - - - - - 1 3 2 -
2 3 3 3 - 2 - - - - - - 1 3 2 -
3 3 3 3 - 2 - - - - - - 1 3 2 -
4 3 3 3 - 2 - - - - - - 1 3 2 -
5 3 3 3 - 2 - - - - - - 1 3 2 -
Evaluation Methods
Continuous Assessment Marks (CAM) End Semester Total

CAT 1 CAT 2 Model Exam Assignment* Attendance Marks
(ESE) Marks
Marks 5 5 5 5 5 75 100
Department Mechatronics Programme : B.Tech.

U23MCT201
Course Name MANUFACTURING TECHNOLOGY 3 - - 3 25 75 100
Prerequisite Nil
BT Mapping
(Highest Level)
CO1 Identify the suitable casting process as required. K3
Course CO2 Select the required metal joining process. K3
Outcome CO3 Understand the differences among various metal deformation processes. K3
CO4 Choose the suitable metal removal process as per the requirement. K3
CO5 Identify the best method for processing plastics. K3
UNIT - I Casting Processes Periods: 09
Introduction to Moulding and Moulding sand: Types, properties, preparation of dry and green sand molding.
Pattern making: Pattern materials, types and allowances. Core making: Types of core, core materials, making of
CO1
cores. Casting methods: Die casting, Centrifugal Castings, Investment Casting and Shell mold Casting
UNIT - II Joining Processes Periods: 09
Fusion welding processes - Types of Welding, Oxy-Acetylene Welding Equipment - Flame characteristics -
Electric-Arc Welding, Electrodes, manual metal arc welding, Carbon Arc Welding, Inert-Gas Shielded Arc
CO2
Welding, Tungsten Inert-Gas Welding (TIG), Gas Metal-Arc Welding (GMAW), Submerged Arc-Welding (SAW),
Resistance Welding and its types - welding of dissimilar metals and applications-Welding Defects.
UNIT - III Metal Forming Processes Periods: 09
Cold and Hot working: Rolling – Forging – Extrusion – Drawing – Sheet metal forming processes – High Energy
Rate Forming Processes: Explosive Forming – Electro Hydraulic Forming – Electro Magnetic Forming CO3
UNIT - IV Metal Mechining Processes Periods: 09
Mechanics of machinery–Chip formation-types of chips, orthogonal & oblique cutting–Tool wear–Tool life –
CO4
Nomenclature of single point cutting tool & Twist drill bit – Effect of cutting fluids.
UNIT - V Processing Of Plastics Periods: 09
Types of Plastics – Types of Molding: Injection molding – Blow molding – Compression molding – Transfer
molding – Thermoforming – Reinforced plastics. CO5

Text Books
1. Rao P N, ‗Manufacturing Technology‘, Volume I & II, Tata McGraw Hill Publishing Company, New Delhi, Fifth Edition,
2018.
2. Sharma P C, ‗A Text Book of Manufacturing – I‘, S Chand & Company Pvt Ltd, 2008.
3. Rajput R K, ‗A Text Book of Manufacturing Technology‘, Laxmi Publications, New Delhi, 2nd edition, 2017.
Reference Books
1. Kaushish J P, ‗Manufacturing Processes‘, Second Edition, PHI Learning Pvt. Ltd, 2013.
2. Kalpakjian S, Schmid R, ‗Manufacturing Engineering and Technology‘, Seventh Edition, Pearson Education India
Edition, 2013.
3. Adithan M, Gupta A B, ‗Manufacturing Technology‘, New Age, Fifth Edition, 2012.
4. B S Nagendra Parashar, R K Mittal, ‗Elements of Manufacturing Processes‘, Prentice Hall India Pvt. Ltd, 2003.
5. S K Hajra Choudry, ‗Workshop Technology‘, Vol – I & II, Media Promoters and Publishers Pvt. Ltd, 2009.
Web References
1. https://nptel.ac.in/courses/112/107/112107219
3. https://www.coursera.org/courses?query=manufacturing
4. https://www.udemy.com/topic/manufacturing/
5. https://www.linkedin.com/company/manufacturing-technology-inc
Cos Mapping with POs and PSOs

Program Specific
COs Outcomes (PSOs)
1 3 3 3 2 3 - 1 - - - - 3 3 3 3
2 3 3 3 2 3 - 1 - - - - 3 3 3 3
3 3 3 3 2 3 - 1 - - - - 3 3 3 3
4 3 3 3 2 3 - 1 - - - - 3 3 3 3
5 3 3 3 2 3 - 1 - - - - 3 3 3 3
Correlation Level: 1-Low, 2-Medium, 3- High
Eva Evaluation Methods

Total
Exam (ESE) Marks
Marks 5 5 5 5 5 75 100

U23MCT202
THERMODYNAMICS AND HEAT
Course Name 3 - - 3 25 75 100
TRANSFER
Prerequisite Nil
BT Mapping
(Highest Level)
CO1 Understand the basic concepts associated with the first law of thermodynamics. K2
CO2 Understand the basic concepts associated with the second law of thermodynamics. K2
Course
Outcome Analyze steady state and transient heat conduction problems of real life Thermal
CO3 K4
systems.
CO4 Understand the convective heat transfer problems in various thermal systems. K2
CO5 Analyze radiation heat transfer problems in various thermal systems. K4
UNIT - I Basic Concepts And First Law Of Thermodynamics Periods: 12
Thermodynamic systems, concepts of continuum, basic definitions, heat and work, zeroth law, First law, SFEE,
First Law for closed and open systems.
UNIT - II Second Law Of Thermodynamics Periods: 12
Second law of thermodynamics Statements, reversibility, causes of irreversibility, Carnot cycle, reversed Carnot
CO2
cycles. Thermodynamic Temperature Scale, entropy, Clausius inequality
UNIT - III Conduction Periods: 12
Introduction of heat transfer – conduction - convection and radiation – Laws – General equation of heat
conduction – Derivation in Cartesian - cylindrical and spherical coordinates – One dimensional steady state heat
conduction in simple geometries – plane wall - cylinder and sphere – Heat transfer composite walls - composite
CO3
cylinders and composite spheres –Conduction with Internal Heat Generation – Extended Surfaces(Description
only).
UNIT - IV Convection Periods: 12
Boundary layer theory – Hydrodynamic and Thermal Boundary Layer- Dimensional Analysis-Flow over a flat–
Flow over cylinders -spheres - tube bank – Internal flow through pipes in forced heat transfer – Natural CO4
convection in vertical - inclined and horizontal surfaces.
UNIT - V Radiation Periods: 12
Radiation heat transfer –Thermal radiation – Laws of radiation – Black body concept – Gray body radiation -
Emissive power – Radiation shape factor-radiation heat exchange between surfaces –Radiation Shields. CO5

Text Books
1. Nag P. K., Engineering Thermodynamics, McGraw Hill Education India Pvt. Ltd, 2017.
2. Sachdeva R. C., Fundamentals of Heat and Mass Transfer, New Age International Publishers, 2017.
3. Rajput R K ―A text book of Engineering Thermodynamics‖, S. Chand publishers, 2016
Reference Books
1. Moran and Shapairo, Principles of Engineering Thermodynamics, 8th Edition, Wiley, 2015
2. Yunus A. Cengel, Heat and Mass Transfer: Fundamentals and Applications, McGraw Hill Education, 2016.
3. Frank P. Incropera and David P. Dewitt, Incropera‘s principles of Heat and MassTransfer, Wiley India Edition, 2018.
4. C. P. Kothandaraman and S. Subramanyan, Heat and Mass Transfer Data Book,Fifth Edition, New Age International
Publishers, 2018.
5. Arora C.P, "Thermodynamics", 25th Reprint, McGraw-Hill, New Delhi, 2013
Web References
4. https://www.linkedin.com/company/heat-transfer-and-process-design-htpd
5. https://www.udemy.com/course/an-introduction-to-heat-transfer/
Program Specific
COs Outcomes (PSOs)
1 3 2 2 2 2 - - - - - - 3 2 2 1
2 3 2 2 2 2 - - - - - - 3 2 2 1
3 3 2 3 3 2 - - - - - - 3 2 2 1
4 3 2 3 3 - - - - - - - 3 2 2 1
5 3 2 3 3 - - - - - - - 3 2 2 1
Evaluation Methods

Total
Exam (ESE) Marks
Marks 5 5 5 5 5 75 100
Semester II Course Category: HS End Semester Exam Type: TE

U23HSTC01
Course Name UNIVERSAL HUMAN VALUES - II 2 - - 2 25 75 100
(Common to all Branch)
Prerequisite UHV – I
BT Mapping
(Highest Level)
Evaluate the significance of value inputs in formal education and start applying them in
CO1 K2
their life and profession
Distinguish between values and skills, happiness and accumulation of physical facilities,
CO2 K2
Course the Self and the Body, Intention and Competence of an individual, etc.
Outcome Analyze the value of harmonious relationship based on trust and respect in their life and
CO3 K32
profession
CO4 Examine the role of a human being in ensuring harmony in society and nature. K2
Apply the understanding of ethical conduct to formulate the strategy for ethical life and
CO5 K2
profession.
UNIT - I Introduction to Value Education Periods: 06
Right Understanding, Relationship and Physical Facility (Holistic Development and the Role of Education) - Understanding
Value Education - Self-exploration as the Process for Value Education - Basic Human Aspirations - Happiness and
CO1
Prosperity - Current Scenario- Method to Fulfil the Basic Human Aspirations
UNIT - II Harmony in the Human Being Periods: 06

Understanding Human being as the Co-existence of the Self and the Body-Distinguishing between the Needs of the Self
and the Body-The Body as an Instrument of the Self-Understanding Harmony in the Self-Harmony of the Self with the Body- CO2
Programme to ensure self-regulation and Health
UNIT - III Harmony in the Family and Society Periods: 06

Harmony in the Family - Basic Unit of Human Interaction- ‗trust‘ - Foundational Value in Relationship - ‗Respect' - as the
Right Evaluation - Other Feelings, Justice in Human-to-Human Relationship - Understanding Harmony in the Society-Vision
CO3
for the Universal Human Order.
UNIT - IV Harmony in the Nature / Existence Periods: 06

Understanding Harmony in the Nature-Interconnectedness, self-regulation and Mutual Fulfilment among the Four Orders of
Nature - Realizing Existence as Co-existence at All Levels - Holistic Perception of Harmony in Existence CO4
UNIT - V Implications of the Holistic Understanding - A Look at Professional Ethics Periods: 06

Natural Acceptance of Human Values - Definitiveness of (Ethical) Human Conduct - Basis for Humanistic Education,
Humanistic Constitution and Universal Human Order-Competence in Professional Ethics-Holistic Technologies, Production
Systems and Management Models-Typical Case Studies-Strategies for Transition towards Value - based Life and CO5
Profession

Text Books
1. R. R. Gaur, R. Asthana, G. P. Bagaria, ―A Foundation Course in Human Values and Professional Ethics‖, Excel Books, 2nd
Revised Edition, New Delhi, 2019.
Reference Books
1. A Nagraj, Jeevan Vidya Prakashan, Amarkantak, ―Jeevan Vidya: EkParichaya‖, 2013.
rd
2. A.N. Tripathi, ―Human Values‖, New Age International Publishers, New Delhi, 3 Edition, 2019.
3. Annie Leonard, ―The Story of Stuff‖, Free Press, Reprint Edition, 2011.
4. Mohandas Karam chand Gandhi, ―The Story of My Experiments with Truth – Mahatma Gandhi Autobiography‖, Finger print
Publisher, 2009.
5. E. F Schumacher, ―Small is Beautiful‖, Vintage Publisher, 1993.
6. Cecile Andrews, ―Slow is Beautiful‖, New Society Publishers, 2006.
7. J C Kumarappa, ―Economy of Permanence‖, Sarva Seva Sangh Prakashan, 2017.
8. Pandit Sunderlal, ―Bharat Mein Angreji Raj‖, Prabhat Prakashan Publisher, 2021.
9. Dharampal, ―Rediscovering India‖, Stosius Inc/Advent Books Division Publisher, 1983.
10. Mohandas K. Gandhi, ―Hind Swaraj or Indian Home Rule‖, Gyan Publishing House, 2023.
st
11. Maulana Abdul Kalam Azad, ―India Wins Freedom‖, Orient BlackSwan Publisher, 1 Edition, 1988.
th
12. Life of Vivekananda, “Romain Rolland (English)‖, Advaita Ashrama Publisher, India, 4 Edition, 2010.
13. Mahatma Gandhi, ―Romain Rolland (English)‖, Srishti Publishers & Distributors, 2020.
Web References
1. https://www.uhv.org.in/uhv-ii
2. http://www.storyofstuff.com
3. https://www.youtube.com/channel/UCQxWr5QB_eZUnwxSwxXEkQw
4. https://fdp-si.aicte-india.org/8dayUHV_download.php
5. https://www.youtube.com/watch?v=8ovkLRYXIjE
Program Specific
COs Outcomes (PSOs)
1 - - - - - 2 3 2 2 - - 3 - - -
2 - - - - - 2 3 2 2 - - 3 - - -
3 - - - - - 3 3 2 2 - - 3 - - -
4 - - - - - 2 3 2 2 - - 3 - - -
5 - - - - - 2 3 2 2 - - 3 - - -
Evaluation Methods

Total
Exam (ESE) Marks
Marks 5 5 5 5 5 75 100
Department English Programme : B.Tech.

Semester II Course Category: HS End Semester Exam Type: TE
U23ENBC02
Course
COMMUNICATIVE ENGLISH - II 2 - 2 3 50 50 100
Name
(Common to ALL Branches except CSBS)
Prerequisite Basics of English Language
(Highest Level)
CO1 Draft effective written communication in professional environment K2
CO2 Apply the mechanics of creative writing with precision and clarity K3
Course
Acquire language skills professionally to groom the overall personality through sensitizing
Outcome CO3 K2
various etiquettes in real time situation
CO4 Develop language fluency and gain self-confidence K3
CO5 Express thoughts and ideas with clarity and focus K2
UNIT- I Business Correspondence Periods: 10
Business Writing: Circular, Agenda, Memoranda, Notice, Instruction, Minutes, Email Writing ,Report Writing- Official and
Demi Official Letters : Applying for Educational / Car / Home Loans / Joining Report, Leave Letter, Industrial Visit, In plant
Training, Letter to the Editor, Calling for a quotation, Placing Order, Letter of Complaints, Letter seeking Clarification, CO1
Resume‘, Job Application Letter, Bio-data, CV
UNIT- II Functional Writing Skills Periods: 10

Four Modes of Writing, Sentence Structure, Art of condensation: Summary Writing and Note Making, Use of phrase and
clause in sentence, Principles of paragraph writing, Techniques of Essay Writing, Jumbled Sentence, Paraphrasing CO2
UNIT- III Etiquettes Periods: 10

Etiquette: Meaning, Kinds: Corporate Etiquette, Meeting Etiquette, Telephone Etiquette, Email Etiquette, Social Media
Etiquette, Dining Etiquette, Communication Etiquette CO3
UNIT- IV Communication Practice – II Periods: 15

List of Exercises
Listening: Letter writing tips
Speaking: Just a Minute, Impromptu Speech, Contemporary Issues CO4
Reading: Variety of examples for Modes of Writing
Writing: Different types of letters
UNIT- V Interpersonal Communication – II Periods: 15

List of Exercises
Listening: Videos on different types of Etiquettes
Speaking: Team Presentation, Negotiation Skills
CO5
Reading: Phrase and Clause
Writing: Free writing on any given topic, Paraphrasing Practice
Lecture Periods: 30 Tutorial Periods: - Practical Periods: 30 Total Periods: 60

Text Books
1. PC Das, ―Letter Writing including Official and Business Letters‖, New Central Book Agency, 2020.
2. Kumar, Sanjay, Pushpalatha,‖ Communication Skills‖. Oxford University Press, 2018.
3. Raman, Meenakshi&Sangeetha Sharma,‖ Communication Skills‖, New Delhi: OUP, 2018.
Reference Books
1. Sahukar, Nimeran, Bhalla, Prem,, ―The book of Etiquettes and Manners‖.PustakMahal Publisher, New Delhi; 1st Edition 2009.
2. Gerson Sharon J, Steven M. Gerson, ―Technical Writing Process and Product‖, Pearson Education Pvt. Ltd. 3rd Edition, 2009.
3. Grussendorf, Marion, ―English for Presentations‖. Oxford University Press, Oxford, 2007.
4. Seely John, ―The Oxford Guide to Writing and Speaking‖, Oxford University Press, 2006.
5. R.C. Sharma, Krishna Mohan, ―Business Correspondence and Report Writing‖, Tata McGraw Hill &Co.Ltd., New Delhi, 2001
Web References
1. https://www.indeed.com/career-advice/finding-a-job/how-to-write-an-application-letter
2. https://owlcation.com/humanities/Four-Types-of-Writing B.Tech. Mechatronics
3. https://targetstudy.com/languages/english/paragraph-writing.html
4. https://www.businessnewsdaily.com/8262-email-etiquette-tips.html
5. https://www.youtube.com/watch?v=UOceysteIjo
Program Specific
COs Outcomes (PSOs)
1 1 - - - - - - - - 3 - 1 - - -
2 1 - - - - - - - - 3 - 1 - - -
3 1 - - - - - - - - 3 - 1 - - -
4 1 - - - - - - - - 3 - 1 - - -
5 1 - - - - - - - - 3 - 1 - - -
Evaluation Methods
Theory
Assessment Model Exam Examination (ESE) Total Marks
CAT 1 CAT 2 Attendance
Marks
75
5 5 5 5
Marks 60
( to be weighted for 50
20 ( to be weighted for 10 marks)
marks)
Practical
Continuous Assessment Internal Evaluation End Semester Internal Evaluation Total Marks
30 (to be weighted for 10 marks) 30 marks
Listening (L)* 10 Listening (L)* 10
40
Speaking(S) 5 Speaking(S) 5
Reading(R)* 10 Reading(R)* 10
Writing(W)* 5 Writing(W)* 5
 LRW components of Practical can be evaluated through Language Lab Software
Department EEE/ ECE Programme : B.Tech.

Semester II Course Category: ES End Semester Exam Type: LE
U23EEPC01
BASICS OF ELECTRICAL AND
Course ELECTRONICS ENGINEERING - - 2 1 50 50 100
Name LABORATORY
(Common to CSE, IT, MECH, CIVIL, CCE, AI&DS, FT, MCTR, CSBS Branches)
BT Mapping
(Highest Level)
CO1 Build the different wiring for domestic and commercial applications. K3
CO2 Design and analyze the domestic power distribution. K3
Course CO3 Estimate the performance of transformer and motors by conducting load test. K3
Outcome Describe characteristics of semiconductor diode and utilize it for different applications
CO4 K5
CO5 Relate the characteristics of various transistor K2
CO6 Understand Rectifiers and Regulators K2
List of Experiments
Section – A Electrical Experiments
Demonstration on Power Sources, Ammeter, Voltmeter, Wattmeter and Energy meter are Pre-requisite for conducting this Electrical
Engineering Lab.
1. Electrical safety precautions and study of tools, accessories, electrical joints and electrical symbols.
2. Domestic Wiring Practice
 Staircase wiring
 Doctor‘s room wiring
 Godown wiring
 Wiring of Ceiling fan, LED lamps and Iron Box.
3. Design of Domestic power distribution.
4. Measurement of 3-phase power using two wattmeter method
5. Load test on DC shunt motor.
6. Load test on single phase transformer.
7. Load test on single phase Induction Motor.
Section – B Electronics Experiments
1. Study of Electronic components and equipment: Resistor, Capacitor
2. Measurement of AC signal parameter (Peak-Peak, rms period, frequency) using CRO.
3. VI Characteristics of PN junction diode, Zener diode
4. Input and output characteristics of Common Emitter configuration of BJT
5. Characteristics of JFET
6. Measurement of Ripple factor of HWR, FWR
7. Voltage Regulator using Zener Diode
Reference Books
1. S. Gowri, T. Jeyapoovan Nadar, ―Engineering Practices Lab Manual‖, Vikas Publishing House Private Limited, New Delhi, 5th
Edition, 2014.
2. A.Sudhakar and Shyam Mohan.S.P, ―Circuits and Networks Analysis and Synthesis‖, Tata McGraw Hill Publishing Company
th
Ltd., New Delhi, 4 edition, 2017.
3. D.P.Kothari and I.J. Nagrath, ―Electric Machines‖, Tata McGraw Hill, New Delhi, 5th Edition, 2017.
4. Edward Hughes, John Hiley, Keith Brown, Ian McKenzie Smith, Electrical and Electronics Technology, Pearson Education
th
Limited, New Delhi, 12 edition 2016.
5. S.K. Sahdev, ―Fundamentals of Electrical Engineering and Electronics‖, DhanpatRai and Co, 2017.
Web References
1. http://eie.sliet.ac.in/laboratories/basic-electrical-engineering-lab/
2. https://www.electronics-tutorials.ws/accircuits/series-circuit.html
3. https://www.allaboutcircuits.com/textbook/experiments/
4. https://www.electronicshub.org/measurements-of-ac-current/
5. http://www.electronics-tutorials.ws
Program Specific
COs Outcomes (PSOs)
1 3 2 3 - - 1 - - 3 - - 1 3 2 -
2 3 2 3 - - 1 - - 3 - - 1 3 2 -
3 3 2 3 - - 1 - - 3 - - 1 3 2 -
4 3 2 3 - - 1 - - 3 - - 1 3 2 -
5 3 2 3 - - 1 - - 3 - - 1 3 2 -
Evaluation Methods

Performance in Practical End Semester
Total
Assessment classes Examination (ESE)
Attendance Marks
viva
Practical work
Marks 15 5 5 15 10 50 100

U23MCP201
Course
THERMAL ENGINEERING - - 2 1 50 50 100
Name
LABORATORY

(Highest Level)
CO1 Understand about various fuels and their properties. K2
CO2 Demonstrate the fundamental principles of convective heat transfer in practice K3
Course
Outcome CO3 Demonstrate the fundamental principles of conductive heat transfer in real life systems K3
practice.
CO4 Analyse and assess the performance of Air compressor and Blower. K4
CO5 Model and test heat exchanging system K5
L List of Experiments
1. Determination of Kinematic Viscosity using Redwood viscometer
2. Determination of Flash and fire point using Cleveland apparatus
3. Determination of Heat transfer coefficient for heat transfer from cylindrical surface by natural convection
4. Determination of Heat transfer coefficient for heat transfer from cylindrical surface by forced convection
5. Determination of Heat transfer coefficient for heat transfer from Pin fin by natural convection
6. Determination of Heat transfer coefficient for heat transfer from Pin fin by forced convection
7. Determination of thermal resistance and conductivity of a composite wall
8. Determination of emissivity of a specimen
9. Performance test on reciprocating air compressor
10. Performance test on air blower
11. Performance analysis of Parallel and Counter flow heat exchanger
12. Heat transfer studies using a plate type heat exchanger
Reference Books
1. Sachdeva R. C. Fundamentals of Heat and Mass Transfer, New Age International (P) Ltd, (2017),
2. Holman J. P.Heat Transfer, 9th Edition, McGraw-Hill Publishing Company Limited, 2011),
3. Kothandaraman C. P. and Subramanyan.S, Heat and Mass Transfer Data Book, Fifth Edition, New AgeInternational
Publishers (2018),
4. R.K.Rajput, Thermal Engineering, 10th edition, Lakshmi Publications, 2018.
5. Yunus A. Cengel, Robert H. Turner, John M. Cimbala, Fundamentals of Thermal-Fluid Sciences, Indianedition, 2016
Web References
1. 1 http: https://archive.nptel.ac.in/courses/112/103/112103316/
2. 2 https://onlinecourses.nptel.ac.in/noc22_me110/preview
3. 3. https://www.classcentral.com/course/swayam-fundamentals-of-convective-heat-transfer-19876
4. 4 https://archive.nptel.ac.in/content/storage2/courses/112104117/ui/Course_home-lec6.htm
5. 5. https://archive.nptel.ac.in/content/storage2/courses/112104117/ui/Course_home-lec39.htm
Program Specific
COs Outcomes (PSOs)
1 3 3 3 3 3 - - - 3 - - 3 1 2 2
2 3 3 3 3 3 - - - 3 - - 3 1 2 2
3 3 3 3 3 3 - - - 3 - - 3 1 2 2
4 3 2 2 3 3 - - - 3 - - 3 1 2 2
5 3 2 2 3 3 - - - 3 - - 3 1 2 2
Evaluation Methods

End Semester
Attendance Marks
viva
Practical work
Marks 15 5 5 15 10 50 100

U23MCP202
Course
MANUFACTURING TECHNOLOGY - - 2 1 50 50 100
Name
LABORATORY

(Highest Level)
CO1 Machine parts by performing various types of operations using a lathe. K2
Course CO2 Perform grinding operations using various types of grinding machines. K3
Outcome CO3 Design and prepare moulding with different types of patterns. K3
CO4 Make proper welded joints as per the design requirements. K3
CO5 Perform sheet metal operations as per the shape and size of the components. K3
List of Experiments
MACHINES
1. Plain Turning and Facing
2. Taper Turning
3. Drilling and Boring
4. Square Head Shaping
5. Hexagonal Head Shaping
6. Plain Surface grinding
7. Cylindrical grinding
FOUNDRY
8. Preparation of a sand mold using split pattern
9. Preparation of a sand mold using solid pattern
WELDING AND SHEET METAL

10. Preparation of butt joints, lap joints and T- joints by Shielded metal arc welding
11. Gas welding practice - Demonstration
12. Forming& Bending by sheet metal
13. Model making – Trays and funnels and different type of joints in sheet metal
Reference Books
1. P N Rao, „Manufacturing Technology – Metal Cutting and Machine Tools‟, Tata McGraw Hill PublishingCompany Ltd,
NewDelhi, 2008
2.Raghavan V, „Physical Metallurgy - Principles and Practice‟, Prentice Hall India Pvt. Ltd., NewDelhi,2006.
3.Kalpakjain S, Schimd S, „Manufacturing Engineering and Technology‟, Pearson Education,7th edition,New Delhi, 2018
4.B S Nagendra Parashar, R K Mittal, „Elements of Manufacturing Processes‟, Prentice Hall India Pvt.Ltd., 2003.
5. S K Hajra Choudry, „Workshop Technology‟, Volume – I & II, Media Promoters and Publishers Pvt. Ltd
Web References
1 http://gssl.iitk.ac.in/pssl/
2 https://www.coursera.org/courses?query=manufacturing
3 https://www.linkedin.com/company/laboratory-for-manufacturing-systems
4 https://www.udemy.com/course/non-traditional-manufacturing/
5 https://www.coursera.org/lecture/digital-manufacturing-design/introduction

Program Specific
COs Outcomes (PSOs)
1 3 3 3 - 3 - - - 3 - - 3 2 1 1
2 3 3 3 - 3 - - - 3 - - 3 2 1 1
3 3 3 3 - 3 - - - 3 - - 3 2 1 1
4 3 3 3 - 3 - - - 3 - - 3 2 1 1
5 3 3 3 - 3 - - - 3 - - 3 2 1 1
Evaluation Methods

End Semester
Attendance Marks
viva
Practical work
Marks 15 5 5 15 10 50 100

Semester II Course Category: MC End Semester Exam Type: -
U23MEM202
Non-
Course Name SPORTS, YOGA AND NSS - - 2
Credit
100 - 100
(Common to all Branch)

Prerequisite -
BT Mapping
On completion of the course, the students will be able
(Highest Level)
Practice Physical activities and Hatha Yoga focusing on yoga for strength, flexibility and
CO1 K2
relaxation.
Course Understand basic skills associated with yoga and physical activities including strength and
CO2 K2
flexibility, balance and coordination.
Outcome
CO3 Develop understanding of psychological problems associated with age and lifestyle. K2
CO4 Recognize the importance of national service in community development. K2
CO5 Convert existing skills into socially relevant life skills. K2
UNIT - I Introduction to Physical Education Periods: 06
Definition, Aims and Objectives of Physical Education - Changing trends in Physical Education
Physical Fitness, Wellness and Lifestyle: Importance of Physical Fitness and Wellness - Components of Physical fitness
-Components of Health related fitness - Components of wellness - Preventing Health Threats through Lifestyle Change - CO1
Concept of Positive Lifestyle.
UNIT - II Yoga and Lifestyle Periods: 06

Importance of Yoga - Elements of Yoga - Introduction - Asanas, Pranayama, Meditation and Yogic Kriyas - Yoga for
concentration and related Asanas (Sukhasana, Tadasana, Padmasana and Shashankasana) - Relaxation Techniques for
improving concentration - Yog-nidra. Asanas as preventive measures – Hypertension – Obesity - Back Pain-Diabetes - CO2
Asthema.
UNIT - III Training and Planning in Sports Periods: 06

Training - Warming up and limbering down-Skill, Technique and Style - Objectives of Planning – Tournament - Knock-Out,
League/Round Robin and Combination.
Psychology and Sports - Important of Psychology in Physical Education and Sports - Differentiate Between Growth and
Development - Adolescent problems and their Management - Emotion: Concept, Type and Controlling of emotions - CO3
Concepts and Types of Aggressions in Sports - Psychological benefits of exercise - Anxiety and Fear and its effects on
Sports Performance - Motivation, its type and techniques - Understanding Stress and Coping strategies
UNIT - IV Introduction To National Service Scheme Periods: 06

Orientation of NSS volunteers: History, motto, symbol, awards, structure and activities of NSS - Days of National and
International Importance - Sensitizing about the thrust areas and awareness activities - Importance of tree plantation and
CO4
voluntary blood donation - The role of SHGs and NGOs in community development – CSR - Life skills and youth
development-extension activities in HEIs - various clubs and schemes like RRC, ELC, YRC, UBA, SBA, etc.,
UNIT - V Community Issues and the use of Technology Periods: 06

Common Problems of rural India - Technology development and its suitability – Sustainability - Value addition to agricultural
products - Service learning and youth volunteering – Shramdaan - Campus cleaning - Field visit to nearby communities - CO5
village survey - Initiatives to clean and green environment - preservation of water bodies in adopted villages.

Reference Books
1. Brar Ajmer Singh, Gill Jagtar Singh, Bains Jagdish, ―Modern Textbook of Physical Education Health and Sports- I‖, Kalyani
th
Publishers, 6 Edition, 2014
2. B.K.S. Iyengar, ―Light on Yoga: The Definitive Guide to Yoga Practice‖, Thorsons Publishers, Thorsons Classics edition, 2015
3. Joseph, Siby K, Mahodaya, ―Bharat Essays on Conflict Resolution‖, Institute of Gandhian Studies Publishers, 2007
4. Barman Prateeti, Goswami, ―Document on Peace Education‖, Triveni Akansha Publishing House, New Delhi, 2009
5. Prof R.B.S. Verma, ―Field Work Practicum in Social Work-Emerging Concerns‖, Rapid Publisher, Lucknow, 2020
6. Sibereisen, K, Richard M, ―Lerner Approaches to Positive Youth Development‖, Sage Publications, New Delhi, 2007
7. Hoshiar Singh, ―Administration of Rural Development in India‖, Sterling Publisher, the University of Michigan, 2009
Web References
1. http://www.thebetterindia.com/140/national-service-scheme-nss
2. http://en.wikipedia.org/wiki/national-service-scheme 19=http://nss.nic.in/adminstruct
3. http://nss.nic. in
4. http://socialworknss.org/about.html
5. Young Journal on Youth published by SAGE: http://you.sagepub.com
Evaluation Methods

Assessment Total Marks
Attendance MCQ Test Presentation / Activity / Assignment
Marks 10 30 60 100

B Tech Mctr-updated-curriculum-R2023 240220 220013

Uploaded by

Copyright:

Available Formats

B Tech Mctr-updated-curriculum-R2023 240220 220013

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

B Tech Mctr-updated-curriculum-R2023 240220 220013

Uploaded by

Copyright:

Available Formats

SRI MANAKULA VINAYAGAR

ACADEMIC REGULATIONS 2023

CURRICULUM AND SYLLABI

COLLEGE VISION AND MISSION

M1: Quality Education:

M2: Research and Innovation:

M3: Employability and Entrepreneurship:

M4: Ethical Values:

DEPARTMENT VISION AND MISSION

To be a department with outstanding competencies in education and research in interdisciplinary field

M1 - Quality Integration: To uphold excellence in education by integrating the teaching learning

M2 - Research Exploration: To maintain a dynamic balance between learning and research by

PROGRAMME OUTCOMES (POs)

PO2: Problem analysis:

PO3: Design/development of solutions:

PO4: Conduct investigations of complex problems:

PO5: Modern tool usage:

PO6: The engineer and society:

PO7: Environment and sustainability:

PO9: Individual and team work:

PO11: Project management and finance:

PO12: Life-long learning:

PROGRAM EDUCATIONAL OBJECTIVES (PEOs)

PEO1: Strong Knowledge

PEO2: Technical Competency

PEO3: Task Orientation

PEO4: Team Work

PEO5: Professional Competency

PROGRAM SPECIFIC OUTCOMES (PSOs)

PSO1: Understanding the Concepts

PSO2: Application of Knowledge

PSO3: Solution Development

STRUCTURE FOR UNDERGRADUATE ENGINEERING PROGRAM

S.No Course Category Breakdown of Credits

1 Humanities Social Science and Management courses (HS) 15

2 Basic Sciences (BS) 20

3 Engineering Sciences (ES) 24

4 Professional Core (PC) 69

5 Professional Electives (PE) 18

6 Open Electives (OE) 09

7 Professional Activities (PA) 14

8 Ability Enhancement Courses (AEC*) -

9 Mandatory courses (MC*) -

SCHEME OF CREDIT DISTRIBUTION – SUMMARY

Credits per Semester

Humanities Social Sciences and Management

3 Engineering Sciences (ES) 12 4 4 4 - - - - 24

4 Professional Core (PC) - 8 13 14 12 15 7 - 69

5 Professional Electives (PE) - - - - 3 3 6 6 18

6 Open Electives (OE) - - - - 3 3 3 - 09

7 Professional Activities (PA) - - - - 1 2 2 8 13

8 Professional Activities for Internship (PA) - - - - - - 1 - 1

8 Ability Enhancement Courses (AEC*) - - - - - - - - -

10 Mandatory courses (MC*) - - - - - - - - -

* AEC and MC are not included for CGPA calculation

Open Elective – I / Open Elective – II

Open Elective – I / Open Elective – II

EMPLOYABILITY ENHANCEMENT COURSES – (A) CERTIFICATION COURSES

Sl. No. Course Code Course Title