WWW.AliFixit.

COM
8. Level 3 Repair

8-1. Components Layout

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
[SM‐G9600] Logic Block Diagram FM_INT
FM_SCL_1P8, FM_SDA_1P8 FM Radio
FM_SLEEP_CLK
SIM1_RST, CLK FM_L, R RTC6213N
SIM2_RST, CLK
SIM & SD card SIM_DET, T_FLASH_DET CODEC_MCLK
* AP PMIC
SLIMBUS_CLK
SOCKET T_FLASH_CMD
SLIMBUS_DATA0,1 Audio EAR_L/G_DET
T_FLASH_D0~D3, CLK EAR MIC
EAR_MIC_P/N
Codec

SUB PBA
CODEC_RST_N
UFS_REFCLK CODEC_SPI_MISO, CODEC_SPI_MOSI EAR_OUT_L/R
CODEC_SPI_CLK, CODEC_SPI_CS_N
WCD9341 EAR L/R
UFS memory UFS_RESET EAR_OUT_FB

MEMORY 64GB
UFS_TX/RX_D0_N/P
UFS_TX/RX_D1_N/P
CODEC_INT1_N
VOICE_INT
MAIN_MIC_CLK/DATA

SUB_MIC_CLK/DATA
MAIN MIC

SUB MIC

SPK_OUT_FB_P
HALL_INT
Cover_DET HALL IC SPK Amp
* AP SPK_AMP_OUT_P, N SPK
MAX98512
HRM_BOOST_EN PMIC HALL_INT2
2nd HALL IC (Sub PBA) AMP_SCL_1P8, AMP_SDA_1P8 SPK_OUT_FB_N
BTP_ID
GPIO_I2C_1P8 AMP_I2S_BCLK, LRCK RCV_OUT_FB_P
BTP_RST_N EXPANDER_RSTN
BTP_LDO_EN NFC_HRM_I2C_1P8
AMP_I2S_D_IN, OUT RCV Amp RCV_AMP_OUT_P, N RCV
WPC_EN
MST_PWR_EN
GPIO
Expander
HRM sensor HRM_INT MAX98512
RCV_OUT_FB_P AUDIO
NFC_EN/NFC_FIRM PCAL6524 Baro. Sensor SENSOR_I2C_1P8
ESE_PWR_EN Magn. Sensor
SUB_CAM_RST_N FLASH_LED_EN, FLASH_LED_TORCH
6AXIS_SPI
CAM_OIS_RST_N
6 axis sensor PROXY_LED_EN CAM PMIC SUB_PMIC_IRQ
6AXIS_INT
SUB_PMIC_I2C_1P8
* AP PMIC
S2MPB02X01‐6030
Finger Print BTP_IRQ
AP
Conn.
BTP

BTP_SPI IRIS_MIPI_D0/D1_P/N
Sensor Iris External SENSOR_LDO_EN
* AP

Front/Iris Conn.
IRIS_RST_N, IRIS_MCLK_CON
PROXY_I2C_1P8 SDM845 IRIS_I2C_1P8 CAM BUCK BOOST
Sensor Conn.

Proxy Sensor PROXY_INT

VTCAM_MIPI_D0/D1_P/N
Front
S

RGB_R VTCAM_RST_N, VTCAM_MCLK

GRIP Sensor

SENSOR RGB_G
PC Conn

GRIP_I2C
SVC LED RGB_B
VTCAM_I2C_1P8,
VTCAM_AF_12C_1P8
CAM

Main Cam Conn.

MIPI _D0~D3_P/N
POP LPDDR4x CAM_MCLK, RST_N
USB3.0_SS_RX/TX_0/1_M/P_AP
SBU1,2
4GB OIS_AF_I2C_1P8
AUX SW AUX N/P
CAM_I2C_1P8 C
CHG_IN
USB_AP_D_N/P
FROM_SPI_SSN, CLK, MISO, MOSI
CAMERA
SUB PCB Conn.

VBUS
OVP LS JIG_ONB_CC AP_UART_T,RXD
IF_PMIC_I2C_1P8
MOTOR MOTOR P/N IF PMIC
EL_ON1 TSP_ICID
VBAT_SENSE MAX77705 DISP_I2C_1P8 Display PMIC *AP sub
BATT Conn. EL_ON2 OLED_ID
S2DOS05X01 PMIC
CBL_PWR_N
CHG_DET

MUIC_D_N/P
CC1,2 DISP_RST_N
DISP_TE
SW_ON

Disp Conn.
VOL_UP DDI_SPI_CS_N, DDI_SPI_CLK
* AP DDI_SPI_MISO, DDI_SPI_MOSI
VOL_DN Display
PMIC INT_KEY
Bixby TSP_INT
PM845 AP_PS_HOLD TSP_TA
PM8998_PON_OUT

TSP_I2C_1P8
PM_SLB
FAULT_N

AP_PMIC_SPMI
DATA/CLK
PLCD_MIPI_D0/1/2/3_P/N
* AP sub
POWER PMIC
PLCD_MIPI_CLK_P/N
UB/TSP
WWW.ALISALER.COM
 WWW.AliFixit.COM
SDM845_CHN_RF Blockdiagram_OMH+Triple-ANT. Confidential
2017.08.31

RFFE #2
ET DAC_CH0
TRX1 TRX2 LNA_AUX2 LNA_AUX1 ET Modulator
QET4100
LNA_AUX1 LNA_LB_OUT1
B29 B8

LNA_OUT2

LNA_OUT1

LNA_AUX1

LNA_AUX2
B26/B5/B18/B19
B8

Mu lt i path
B20

SW
ANT

SUB ANT 1 B26/B5/B18/B19

B12/B13 LNA_AUX2
RFFE #2
(PA&ASM)
(lb/mb) B28A
B20
B12/B13
RFFE #3
(LNA 38.4MHz)
LNA_LB_OUT2
B1/3/5/8/12/13/17 B28B B28A
B28B
/18/19/20/25/26/28 B29
HB_TX _CH1
ZT
MI PI RFFE #4(38.4MHz) Port Freq. Range
TX_CH1_LTEU
TX_CH1_UHB
5000-6000M
3400-3800M
MB_TX_CH1
RF_IN LB_ANT
LB _ANT
MAIN ANT 1
TX_CH1_HB1
TX_CH1_MB
LTE B7/30/38/40/41
1700-2000M (all techs)
(LB/MB)
TX_CH1_MB2 GSM HB LB:5/8/12/13/14/17/18/19
SCC_CPL
600-915 (all techs)
TX_CH1_LMB1 OMB _CPL
B7/41 1400-1500M (W/LTE) /20/26/28
X-GND TX_CH0_LB2 600-915 (all techs)
MB:1/2/3/4/25/34/39

2G_IN
Switch (MIPI) LNA_AUX
_MHB2
LNA_AUX
_MHB1 TX_CH0_HB2 LTE B7/30/38/40/41 5.5 x 8.0 x 0.9
TX_CH0_HB1 LTE B7/40/41 Tx_B5/8/12/13/17/18/19/20/26/28_BC0/10 CPL_OUT
hb : 7/40
1880-2025M (GSM HB,
TX_CH0_MB2
TDD-LTE, TDSCDMA) B7 Rx0(When 3-7CA)
1400-1500M (W/LTE,
Tx_B7/30/38/40/41
TX_CH0_LMB
GSMLB/HB)
B40 Rx2(When 3-40CA)
1.8 ~ 2.4GHz
TX_CH0_MB1 1700-2000 (all techs) RFFE #2
LNA_MB_OUT1 Tx_GSM_1800/1900 (PA&ASM)
Tx_GSM_850/900
1
2.5 ~ 2.7GHz
Tx_B1/2/3/4/25/34/39/66_BC1 Ape rtu re
Ape rtu re
Tu ne r Tu ne r
RFFE #5
SUB ANT 3 LNA_MB_OUT2
CPL_OUT

GND pa th : r out e sid e b y sid e wit h F BRx inp ut

(hb) 1.4 ~ 2.1GHz

B7/40/41

B40
TRX1/2/3 LNA_AUX_MB
MI PI

RFFE #4(38.4MHz)
SDR845 OMH LPAMID

B7 B40

5G_LTE_U_PRX_B
W_GRFC _5 W_GRFC _5

WiFi 2(5G)
WiFi 1(5G) ANT1

OMB _CPL
MIMO_B1/3/7/40/41
ANT2

CHN/HK/Latin VCO Port Freq. Range

LB_A 600-960M
미지원 MB_A 1400-2400M MIMO_B1/3/7/40/41
Rx_OUT_HB_Aux2 2.5 ~ 2.7GHz

LNA_OUT_HB_AUX2
RX1 HB_A 2100-2690M
RFFE #4 UHB_A 3400-3800M
4P4T
LTE-U ANT0

(38.4MHz) LTEU_A 5000-6000M CA_3/40 RFFE #2 LNA_OUT_HB_AUX1

Rx_OUT_HB_Aux 2.3 ~ 2.4GHz MAIN ANT 2
MB_A 1400-2400M

GND
VDD_1P8 VDD_1P2

13
VIO ID0 CLK DATA

RF FE 2.0
RX3
HB_A 2100-2690M PRx_B5/8/12/13/17/18/19/20/26/28 B
LNA_OUT_MB_MIM O2
Rx_OUT_MB_4Rx2 (HB)
MB_B 1800-2690M _BC0_GSM850/900 mb: 1/3
RX0 UHB_B 3400-3800M
OUT_1A
LNA_IN1 7
OUT_1B Rx_OUT_HB2
HB: 7/38/40/41
LTEU_B 5000-6000M
LTE-U ANT1 LNA_IN2
4
OUT_2A
OUT_2B
PRx_B7/30/38/40/41 A
LNA_OUT_HB2
B3 Rx2(When 7-3CA)
LB_B 600-960M 2
CA_B1/40/41 B1/B3
RX2 MB_B 1800-2690M LNA_OUT_MB_MIM O2
Rx_OUT_MB_4Rx1 Ape rtu re
HB_B 1800-2690M Tu ne r
SUB ANT 2 LTE-U LNA
PRx_B1/2/3/4/25/34/39/_W1/2_DCS/PCS
close to
LPAMid
(mb/hb) CA_B3/40
B
RFFE #2
Rx_OUT_HB1
LNA_OUT_HB1
RFFE #5
B1/2/3/4/7/25/34/38/39/40/41
B
Rx_OUT_MB2
CA_7/40, MIMO_B1/3/7/40/41 B7/38/40/41 LNA_OUT_MB2

A Rx_OUT_MB1
LNA_OUT_MB1
DRX_B5/8/12/13/17/18/19/20/26/28/29

TRX5
TRX3
TRX4
TRX1
TRX2
W_GRFC 1
_BC0/10_GSM850/900

MAIN ANT 3

LNA_IN_B21_Aux

LNA_IN_B1/4/66_MIM O
LNA_IN_B25/3_MIM O
LNA_IN_B34

LNA_IN_HB_MIM O

LNA_IN_HB_Aux

LNA_IN_HB_Aux2
5G_LTE_U_DRX_B B34

RFFE #4(38.4MHz)
(mb/hb)
B1(66)
mb:1/3
MI PI B3 B3 Rx2(When 3-7CA)
B7
B3 Rx0(When 7-3CA)
W_GRFC _4
OMB LFEM(QDM3870), 4.0 x 3.0
CA_B1/3, MIMO_B7/40/41 B40

W_GRFC _4

LNA_MHB_OUT1

VCO Port Freq. Range

LNA_MHB_OUT2
LB_A 600-960M
MB_A 1400-2400M
RX1 HB_A 2100-2690M
CA_B1/3 UHB_A 3400-3800M
A
LTEU_A 5000-6000M
LNA_MHB_OUT3 MB_A 1400-2400M
RX3
DRX_B39 HB_A 2100-2690M
MB_B 1800-2690M
CA_B7/40/41, MIMO_B1 RX0 UHB_B 3400-3800M
LTEU_B 5000-6000M
LB_B 600-960M
DRX_B1/2/3/4/7/25/38/40/41_W2_BC1_DCS/PCS RX2 MB_B 1800-2690M
TRX1 HB_B 1800-2690M
CA_1/3/7/40/41
B41
B41 Direct mapp in g Phase sh ifter
Qco m to gu id e the Ph as e sh if ter va lu e ac co rd i ng to Boa rd a nd Fil ter co nd it i on
B41 Rx Fil ter는 OMH LFEM AUX에서5mm 이내 배치
B39
[Splitting information]

WWW.ALISALER.COM
1. B2/3/7/41: E xt ernal S plit
2. LTE U/LNA: S DR 845
LTEU/LAA: It’ s b est to sp li t o n SDRs in ce e LNA ca n be be t e ro ptim iz ed a t 5 to 6GHz. If y ou p la n to ke ep th e i nter stag e fi lt er
B34 be twee n eL NAa nd SDR, the re sh ou ld n ot be to o mu ch i nte rfe ren ce from WiF i 2.4GHz.

For B41, thi s ba nd is s ufferin g from WiF i 2.4GHz i nterfere nc e, i t’ s be st to sp li t o n eL NA. The i so la tio n be twe en th e two e LNA
ou tpu ts wi l l mi ni mi ze the B41de se ns e du e to Wi Fi 2.4GHz j amm er.
 WWW.AliFixit.COM ANT2005

ANT3000
ANT2007
V2008
C2014

ANT3001
L2029
L2032

MIC8000
C2111
L2072
L2033
C2110
U2089

VR3002
L3025
TP2010 C2107

V3004
V2000
L2031

L3013

L3015
C3052
F3001

L3007
L3005
L3001
L3019

V3001
C2103

R3034
C3020 L3020 C3002 R3027

U4010
C2000

C3025

C3026
F3002

L3036
C3059
C2008 C3024

C4045
C3016
L3021
L3014

ZD3007
C2095

C2093
C3021
C3022
C3017
C3004

C2019

C2001
L2000
L3003
SC3006 U3000 R5008

L3024
C2002
C8091
V7019 R5011

L3009
C3000
V2013
L2065

C8022
L2057
R8007
V7016

C8023
L3000
L3008

L2059
L2067
C3001
R3003

C3056

L3039
F2007

BOTHHOLE7011
L2016

U3003
C3032 C3031
R5023
R5020

C10028
L2012 C10027 R3020
L10010

L3011
C2013

C2152
C10032
C10033 C10026

R3012
BOTHHOLE7016
L2017

R5041

R5042
ZD10005
C10030 ZD10004
C10029 C10031 L10004

L3010

L3012
U3004

C3003
BOTHHOLE7000
L2066
F3000

C3028
U3005

U2101
V7000
L2058 V7011

C3029
V2011 R3019 TH3000
R3024

L3028
C3047 R3023 VR3004
V2002
L2060 C2143 HDC10001 V3003
R3004
R3018

R3021

R3022
ZD8002

ZD8003
C3051 C3043

L2013

ZD3019
C2150

C3049
L2056 C3027
ANT2008 C8040 C8046

R8025

R5053

R5052
C2153
R3008

L8009
L8011
SUS3000

ZD3018
C3048
R3009

HDC3000
C8036
SUS3003
L10005
ZD14014 ZD14013
C14019
C10025 C14012
RFS2000

C3055

L3038
C14020 R5013
R5010
C3018 L3022

L2063 L2062

C3019
C2145
F2006

RFS2001

C8088

C3060
F3003

C8072
C2144

L8017
C8075
SC3009

C8077
L2064

L3023
U8004

C8076

L3029
C8073
U2100

R3015
ZD3017
R3011

C3041
C8090

L2015

R3028
C8089

ZD3016
ZD3022

C3040
C2018
C3007 L7018

R3029

C3039
C2138 R3033

SC3004
C3012

TP3015
ZD3015 C3050
ZD3020
C3045
GA7000
TP3003
C2136
ZD3021
ZD9000 R3010
C3044

C3042
C2140 C2137
TP2007

L3027
V3002
C3013

L2527

L2528

C9110
C2504

TP2000
TP2001

R7008
L2525
ZD9019

C3046

L3026
L2524

LED9000
TP2501
C3008

V7006
C2503
L2510
L2526
L2523 ZD9001

ZD9004
HDC9001
F2502

C9051
L2521
R3038
R9026

C9106
L2503
ZD9005
L2520
F2504

U9007
R5002
U2505 ZD9014

C9050
ZD9013 C9107
L2522 R3025
R5004

C9108
C2505
L2512

L2511
R3014 C9068 ZD9015
C2502

C4057
C2501

C2507
L2509 R3013

L2504
L2506

L2505

C9109
L2507

SU
F2501
U2508

U5000
C9043
TP5005

L2529
L2508 ZD9006 C4056
L2501 L2502

S3

R5045

ZD9008
C4037 R4030
C4046
0
ZD3003

C5005
02

C7096
ZD3002 R3000 C7086
R7016
U4008 C7084 TP4505
ANT2003

C7092
R7017
C7089
C4508
R7042

L2001
V2001

L2002

C4506
TP4500

R7019

C7095
TA7000

C4509

C4507
C4505
C2003 TP_AXIS_INT

C4502

HDC7000
C4503

TP4507
R7041

C2004

C4511
U4013
L4005

C7087

U4005
TP9001

U4004

C4501

U4500
U10003
L2008

C7088

C4035
C4034

C7129

C4500

C4504
L4004

C4036
V7012

U10004
C4033 TP4506

C9052
R7006

R7040 TP4504

C6073 C7081
TP4503

C4510
TP8002 TP8001

C6072

TH7001
R7027
TP7016
ZD7002
TP8003
TP8000

L4501
L4500

V7002
TP3013

TP3014

TP3012

TP3011
TP3016
TP3000 TP4501

BOTHHOLE7012 R3016
C4515

C4518

C4517
C4514
C4513
ANT7013
ZD9007

C9022
R7036

R3017
C4516
R4036

TP4502
R7022 ZD7003

TP3010
TP3009

C4519
C4512
R4500
R4501

TP4508
TP3001
TP3004

TP4510

TP3005
TP7001

ANT7014 ANT7008
ANT7010

TP3019
TP3020 TP4509 TP4511

ZD7500 ZD7501

TP3007
TP3008

TP3006
TP4011

TP4012

TP4013
C9103

BOTHHOLE7002
TP4014

HDC6000

ANT7012

ANT7011
ANT7009

TA7001
C7094

C7085
CON5000
R6001
L9005
BOTHHOLE7014
C9023

C9038

L9002
C9039

C9006

R6000

U7003
C9002
BOTHHOLE7013
TP7017
C9034

C9008
C9004
L9007

TP9002
C7093
R7014
U9002
C9005
L9010

C9003

R7013
C7007
C9105
C9001

C7003
C9041
R9004

C9042
C9027

C9000

C9029

C9040
C9026

R9005 C9035
C9033

C7004
R7009

R7010

C7002
C9032
C7056
C9037

C7030 R9003 C7006

C7060
R7011

R7012

OSC7000 C7061
C7052

C7055
C7062
C7054

C7082 C7134
C7058
C7029
C7059
C7020
C7049

L7005

C7024
C7057 C7053 C7076
C7078

R7000
C7073

C7064
L7007

C6068
C6066

C7047

C7046

C7044

C7080
C7068
C7065

C7072 C7066

C7017
C7063

C7077
C7079

C7083
L7006
C7016
U7002

C7015
L7009 C7018

L7004
C7013
C7012
L7003
C7019

L7010
L7008

C7014

SC3003
C7051

C7011
C7000
C7001

C7009

C7010

L7011
C7130
L7015

L7014

L7013

L7012
C7135

C7132

C7005

C7008

C7133

C7136

C7131
C6029

C6046 C6043
C7048

C6063
C6058

C6056

C6059
C6031
C6004

C6010
C6030

C6060
C7045
C9017

C6015

C6025
C6033
C6023

C6081

C7146

R5018
C7042
R5019

C6011
R5059
C6020 C6002
C6076
C6077
C6005
C6003

C6064
R5022

C6083
C6008 C6006
C6049
C6001
C6009
C6019

TP5000
TP7002

TP_SLIMBUS_DATA8001
C6017

TP5001
TP_SLIMBUS_DATA8000

C6007 C6042 C6082

C6061
C6062
TP7005

C6052
R5050

C6045
C7050
C6034

C7067 C6000
C6038

C6014
TP7003

C7043
C6040

C6041

C6024

C5006
C6018
C6013
TP7000

C6032
C6039
C6051 C6078
C6055 C6065
R9025

C6050
C6022

C6048

C6028

C6079

C6053

C6057
C6075 C6054
C6080

C6027
C6047

R9024
C6044

L7019

C9007

C6016

C9016
L7023
L7022

C6026

C9010
C9009
C7102

L9015
L9001

C7103
C7101

C7141
L7021

TP7007 U7004
C7104

C9013
U9000
V7001

C9014

C7105 C7107 L9016 C9020

C7139 C7137
C7140
R9001

C7138
C9021

C9018
C9015 C9019
C9104

C9011

C9012
C7097
BOTHHOLE7001

C7098
C9036

L9014
L9004
C9084
C9025
C9083 C9085
C2084

C2100

C2088

C2075
C2090

C2082

C2085
C2074

C2081
C2087
C2077
TP2005
TP2002

L9006 TP2004
C2098
TP2003

C2073
C2121

L9000
C2104

C2078

L9003
L1011
C1114
C2106

L2068
C2146
C4044

R4006

U2099
C2105

L2054
C2141

L2041
C2119
C2086

L2048
C2132

U4009
L2006
C2129
R2007

C1074
C4051
L2052
C2139
C1094

L1084
C1109

C2079
L2018

C2080
C9122
L2061
C2089
C2083

C2102
C2099

C2096

C2097

C1089

R9019
R9002

R9006
R5006

R5007

C1066

C9070 L9017
C1065
L2071 F2008 C2151
C2101
C9071

SC3002
R9022
C9069
L9013

U1090
C9063
HDC9000

C9076
L9009

C9073
R9016

C9064

C9121

C1067 C1069 C1077

L1036

L1041
L1031
C9120

C1068 C1076
C1075
L1032

L1029

L1040

L1035
C1072
R9017
C9060

C1070 C1078
R2005
C9072

F1000
R2006
R2004
C9061

C9077
C9080

C9081

C9065
C9067
C9079

L1057 C1088
C9078

C1087
L1059
C9066

BOTHHOLE7005
RFS1000

C1086
R1003
L1106
C8092

C8052 C8042
BOTHHOLE7010

L8010
L8007
C8051

ANT8004

ANT8005

L1033

ZD8001 C8041
C1071
L1034

ZD8000

C1002 C8093 L1037

TP_UB
C1081 ZD8010
C1073
L1105

L1048
L1047

R8029
TP_6001

R1002
L1046

C8064

WWW.ALISALER.COM
C8021

L8014

L8015

RFS1001
C8066

RFS1002 C8067
C8087

ZD8004
ZD8005

TP8004
 WWW.AliFixit.COM

ANT2006

ANT2012
ANT3002

V2007
L2028

L2022
ANT2011

ANT7018

U2097
L2026
C2094

L2027
L2530

L2514

L2513
L2024

F2000

F2503
C2128
L2023

ANT2009
L2515

L2531
C2092
L2025 SC3005 C2123
C2124 C2506

L2034

L2037
C2114
C2115

ANT8002
ANT8003

U2091
SUS3001

SIM3000 CON5001

L7017
ANT7006

C7106

C7108

ANT7005

L7020
ANT7007

ANT7003

ANT3003
ANT7001

R5039
R5040
ANT7004

R7018

C7091
R7051 R7001
R7025
R7024

C7147
C7026

C7027
R7050

ANT7000
ZD7004 ANT7002

C7031

C7149
C7022

R7030

R7003

R7037
C7148
C7168

V7017
R7044
C7169
R7045

R7043

ZD7006
C7155

U7006

R7049
L7000

C7167
DEBUG_IO
TP7011

C7156

R7034

R7032

R7033
TP7012

TP7010

ANT7015
C7173

C7166

R7035
R3002
DEBUG_CLK

C7028
C3011
R7052

C7154

TP7015
ZD3001

C7023
C7165
R5017

C7021
ZD3011

ZD3013

ZD3010

ZD3000

C4059
C7110

C7109

C7117

C7120

C4040
VR3000

VR3003
C7118

R5016
TA7002
C7111 L7002
R7021

C9086

C7157
ZD3012 ZD3014
L3016

R5003

R5005

R5001

R5000
TH7000

C10005

L10009
ZD10011

ZD10010

ZD10003

ZD10002

ZD10001
R7039

V7020

C7032
C7128

C7164

C7159
C4039

C4060
R9000
R5058 R5057 R5056
C7127

U7000
C7025 L7027
C3009 C7153
U4006
C9100

C7158
D7002
C10006
C9094
ZD3005

ZD3004

ZD3009

ZD3008

C9089

C9097
R4003

TA7003 R7023
C9096

C7112

C7160
C7126
R7020

U7005 ZD3006 R3001

C9098
C9093

L7001
U9001

L4010
C9091

C9090

C7162
R3007
R5054

R5055

C9095

C7123
C10002
C7113

ZD10006

C7161
C7116

C9045
C9088 C9044
C9087
L10007

C7125
C9092 C10000

HDC10000
C3005

C7075

U9003
C7074
ZD7001
C7124

C7119

C7121

C7122

C7115

C3006

C7114

L9008
C9101 C10001

L7016
V7013

C9049
ZD7000
C9099 SC3001
L10001

C10004

U7001
C10003

C9046

C9047

C9048

TP7004
C4017

TP7009
TP9000

TP7006
V7014 D4000
R5031 R5021

TP7008
R5029 R5024

UME6000
C6074
L10006 R10000

C5000

C5001
C10024

TP9003
L10002

TP6013

TP6010

TP6008

TP6001
TP6005
R3006

TP6006
R5015
C3010
L3017

R7004
C10014
C10007

R5014
R3005

TP_PS_HOLD
TP5002
TP6012

TP6011
TP6007
TP6009
TP6000

C6071
C6070

TH5000

R5028
TP6003

C6067

TR7000
C6035

R7053
C6069

C9082
R5026
UCP500
TP_SSC_DEBUG_RXD

R9020
R5047

TP_SSC_DEBUG_TXD

R9018
R5051

R5046
R5048

R5049
C6036

TP5009
TP5012
TP5011
TP5003

TP5010
TP5004

C6021
SC3000
C6037

C6012

ZD1001

R1005

C1141

ZD1000 R5033

R4014
R5036
R1004

CODEC_SPI_CSN
C1140
CODEC_SPI_DIN
TP_CODEC_RESET_N

R5034
R5030 C5004
C8014

C5003

CODEC_SPI_DOUT
C8069
R5009
C8047

C8019

C8048

C8053

CODEC_SPI_CLK
L8003
L8013

R5038
R5025 R5035
L8008

L8012
U9004

R5037
C8070
R5032
R5027
R4019
C8031

U8003
R8011

R8010
C8043

C8044

R5012
R8090

R8089

R8091

R8092
R4020
C8028

C8015
L8016

C8001
R9007

R9015
R9008

L8000

R8033

R8032

R8034

R8035

R8021

C8045
U8001

C8005
C8002
C8025
U4003

R8020
R8022
C8013
C8029

C8068
C8037

C8030

R4015
C8024

L8005

C4031
C8017

R8012

C8086
R4007

R4008

C8057
C8026
C8027

C8009
R8008

R8004
TP_CODEC_INT
C8003

C8016
C8000 R8005
C8050 R8003
TP_VOICE_INT

C8032 L8006 C8039 C8012

C8059

R8006

L8001
C8007

C8006

C8008
L8002
C8038 TP5006

C8056
C8055
C8004

C1112
C1111 C1108
TP2006
L1520 L1521 L1071
R2008

R2009

L1080

L1522 L1523
F1505

C1103
C1527

L1518 L1519
C1102
L1082

U1005
L1079

L1030 L1524 L1525

L1501 L1502
C1127
F1005

L1066
L1070
C1106
TP1000

C1107

C1104

L1078
C1101 R1013
L1077
ANT7016
C1116

C1119
C1113
TP1001

C1105
L1072
L1012

L1503 L1504
C1505 C1507
C1096
L1517 TH1000 C1010
C1017 L1018
L1536

L1526

U1302
L1514
V7018
TP1003

L1516
L1527
TP1002
C1528

L1528

L1529
C1000
F1507

L1531
L1530

L1000

L1534
C1100
L1074

SC3007
U1095

L1511
U1094
L1532

L1535

C1005
L1512

L1513

L1533

L1073 C1099
R1000
C1132
C1129

C1137 C1134
C1131

C1006

L1098 L1099
R1001

U1004
L1063
C1095
L1101

L1058

JTAG6001

L1100
C1130
C1139

C1136
C1133

L1060

L1102 C1092
C1090
TP4015
C1091
C1504
L1103

L1508
C1506

C4050

C4048

F1506 U4011
L4008

U1301
C4049
C1501
L1537

L1507
C1503
C4047

L4009

C1502
L1506
TP_FM_SLEEP_CLK

V7010
ZD8009

C8035
Q4000

C8033

L8004
ZD8011

V7005
R8030
C4019
R4035

C8010

U8000
C8011
GA7001

R4034 C8020
R8009
C8018

C4014
C8061

U4001 C4016 ZD8016

L4001 ZD7005
C4015
ZD8015
C8083
ZD8013 ZD8012 ZD8008
ZD8007
R8041
R8028

C8058 C8049
C8034 C8065
ZD4000

L8029

ZD8014

ZD8006
ZD8022

ZD8021
R8086
R6004
L8028

L8027

R8027

WWW.ALISALER.COM
R8039 R8038
R8037 R8036
TP5008

TP5007

HDC8000

JTAG6002 JTAG6003

JTAG6000
 WWW.AliFixit.COM
8. Level 3 Repair

8-3. Flow chart of Troubleshooting.

Oscilloscope Digital Multimeter

Power Supply + driver, ESD Safe Tweezer

8960 & Spectrum Analyzer Soldering iron

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-1. Power on

Mobile phone does not power on

YES

Проверьте уровень напряжения батареи.

Это больше, чем 3,5 В?т
Check the Battery NO Charging the battery by TA. If its voltage level
Voltage level. is extremely low (under 2.5V),
Is it more than 3.5V? Charge current is only 50mA.
It will take more time to meet booting voltage

YES

Включите телефон и проверьте звук при включении

или вибрация двигателя.
Power-on the phone and NO
check the power-on Change the FRONT-LCD ASSY
sound
or motor Vibration.

YES
При нажатии клавиши питания проверьте,
не закорочена ли клавиша питания на передней панели FPCB.
When pressing Power NO
key, check if the Power Replace the POWER KEY FPCB
key FPCB pad on front
is shorted

#1 Check the TP7003 is High.

#2 Check the output voltage of U7002
YES - L7007 = 1.904V, L7009 = 1.04V
- L7008 = 0.928V, L7003 = 0.928V,
- L7010 = 0.872V, L7005 = 1.352V
- L7006 = 1.8V, L7004 = 1.128V,
- L7015 = 0.875V
Проверьте сигнал AP_PS_HOLD = 1,8 В #3 Check the TP5003 is High
NO
Check the signal of
※ Each voltage level has ±10% margin
AP_PS_HOLD = 1.8V
→ Change the U7002 If the voltage level is
abnormal,

#4 Check the Clock OSC7000.

YES Frequency is 38.4MHz
※ Test condition (Oscilloscope setting)
: 20.0us.div (time division)
Replace the OSC7000.

check the initial operation (8-4-3)

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-2. Motor

Motor does not work

Yes

No
Check the Clip Resolder or Reconnect
(ANT7006 and ANT7007) ANT7006, ANT7007

Yes

No
Check (crack,open,etc) Resolder or Replace
L7017, L7020 L7017, L7020

Yes

No Resolder or Replace U7001

Check the C7074 = 5.2V or
Replace : U7006

Yes

Replace Motor

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-3. initial

Initial Failure

Re-download Software

Re check “8-4-1 Power on” NO

Check the UCP500 (Crack etc )
Trouble shooting process

Normal

Change UME6000.
Do not use Blank MEMORY

Normal

Change PBA

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-4. SIM PART

SIM Card does not work

Check the SIM card Abnormal

Change : SIM Card

YES

Check the
Abnormal
Check the NFC IC(U4500)
VDD_NFC_SIM1=1.8V
Check the PMIC(U7002)
VREG_L9_1P8=1.8V

NO

Check the C3011,

Abnormal Check the SIM/SD Socket,
ZD3002, ZD3004,
AP(UCP500)
ZD3006, ZD3008

Normal

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-5. SIM/SD PART

SD Card does not work

Check the SD card Abnormal

Change : SD Card or Replace : SD Socket
SD Socket

YES

Check the VDD T Flash Abnormal

VREG_L21_2P95=C300 Check the PMIC(U7002)

5=2.95V

NO

Check the L3017, ZD3010,

ZD3014, ZD3013, ZD3012, Abnormal
Check the SD Socket, AP(UCP-500)
ZD3011

Normal

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-6. OTG

OTG does not work

Abnormal
Check the OTG ICON Check the CCIC
(U7006)

YES

Abnormal
Check the Voltage of Check the IF PMIC
Loadswitch (L4001)=5V VBUS_5P0(C4015)=5V

Abnormal

YES Normal

Check the Loadswitch

Check the IF Socket & (U4001)
SUB PCB connector

Normal
Check the IF PMIC
(U7006)
END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-7. Hall IC

Hall Sensor of main PBA does not work

Yes

No
Check the voltage
C4033, L4004 =1.8V Replace U7002

Yes

Check
Check the
the voltage
voltage No
without
C10092Magnet
=1.8V
C4034 =1.8V Replace U4004
with Magnet
C4034 =0V

Yes

END

Hall Sensor of Sub PBA does not work

Yes

No
Check the voltage 1. Reconnect HDC8000
C1003 of Sub PBA =1.8V 2. Replace SUB PBA

Yes

No 1. Reconnect HDC8000
Check the HDC8000
Connection 2. Replace SUB PBA

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-8. 6 Axis sensor

6 Axis Sensor does not work

Yes

No
Check the voltage
C4035, C4036 =1.8V Replace U9003

Yes

No
Check U4005’s package, smd status
(crack, open, short, etc.) Replace U4005

Yes

No
Check 6Axis Replace U4005
MOSI, CLK, NSS, MISO pin (If there is still out of order, replace UCP500)

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-9. Magnetic sensor

Magnetic Sensor does not work

Yes

No
Check the voltage
C4045 =1.8V Replace U9003

Yes

No
Check U4010’s package, smd status
(crack, open, short, etc.) Replace U4010

Yes

No
Check R5008, R5011 Replace U4010
(I2C is OK?) (If there is still out of order, replace UCP500)

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-10. Barometer sensor

Barometer Sensor does not work

Yes

No
Check the voltage
C4046 =1.8V Replace U9003

Yes

No
Check U4008’s package, smd status Replace U4008
(crack, open, short, etc.) (If there is still problem, replace UCP500)

Yes

No
Check R5008, R5011
(I2C is OK?) Replace U4008

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-11. Proximity + RGB sensor

Proximity + RGB Light Sensor does not work

Yes

Check the voltage No

L3026, C3045, C3046 =1.8V Replace U9003
(Sensor’s IO voltage)

Yes

Check the voltage No

L3027, C3050 =3.3V Replace U9002
(Sensor’s LED voltage)

Yes

No
Check R5052, R5053
(I2C is OK?) Replace UCP500

Yes

No
Check connection HDC3000 Reconnect HDC3000

Yes

Abnormal
Check sensor FPCB
(crack, damaged, etc.) Replace Sensor FPCB

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-12. HRM sensor

HRM Sensor does not work

Yes

Check the voltage No

C4056, C4057 =1.8V Replace U7002
(Sensor’s ASIC voltage)

Yes

Check the voltage No

C4003, C4040 =5.25V Replace U4006
(Sensor’s LED voltage)

Yes

No
Check R5002, R5004
(I2C is OK?) Replace U4013

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-13. GRIP sensor LDO

GRIP Sensor does not work

Yes

No
Check the voltage
C4044 =3.5V Replace U7002

Yes

No
Check the voltage 1. Reconnect HDC8000
C4051 =1.8V 2. Replace SUB PBA

Yes

No
Check R5037, R5038
(I2C is OK?) Replace U4009

Yes

No
Check the voltage 1. Reconnect HDC8000
C138 of Sub PBA =1.8V 2. Replace SUB PBA

Yes

No
Check the HDC8000 1. Reconnect HDC8000
Connection 2. Replace SUB PBA

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-14. Display

LCD is still off after PWR ON

Yes

No
Check the connection of Reconnect the HDC9000
HDC9000

Yes

Check No
VDD_DDI_3P0=3.0V (C9065,C9083) Resolder or Replace the PMIC (U9000)
VDD_DDI_1P8=1.8V (C9066,C9085 )
VDD_DDR_1P6=1.6V(C9078,C9036,
C9021)

Yes

No
Check Resolder or Replace the PMIC (U9000)
ELVDD 4P6=4.6V (C9009,C9010)
ELVSS_-4P4 = -1.4 ~ -5.4V (C9011,C9012)
ELAVDD_7P6 = 5.8 ~ 7.9V (C9013)

Yes

Resolder or Replace UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-15. TSP

Touch Screen does not work

Yes

Check TSP Connector on No

MAIN PBA Reconnect the HDC9000

Yes

Check No
VDD_TSP_1.8V (C9084, C9064) Resolder or Replace U9000
VDD_TSP_3.0V (C9025, C9063)

Yes

Replace the UB

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-16. VT CAMERA

“Camera” function does not work

Yes

Check the Camera connector No

Reconnect the HDC10001
on Main PBA

Yes

Check the voltage

C14012 : 2.8V No
C10027 : 1.05V Resolder or Replace U9002
C10030 : 1.8V
C10031,C10026 : 2.8V

Yes

No
Check the VTCAM_MCLK is
Reconnect the PBA
24Mhz (C10014)

Yes

Replace the camera module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-17. 12M CAMERA

“Camera” function does not work

Yes

Check the Camera connector No

Reconnect the HDC10001
on Main PBA

Yes

Check the voltage

C9097, C10001, C10000 : 1.1V
C10004, C10003 : 2.8V No
C10006 : 1.0V, C10002 : 3.2V Resolder or Replace U9000
C10005 : 3.3V, C9100 : 2.8V
C9029, C9096 : 1.8V
C9034 : 2.8V

Yes

No
Check the CAM_MCLK is
Reconnect the PBA
24Mhz (C10024)

Yes

Replace the camera module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-18. IRIS CAMERA

“Camera” function does not work

Yes

Check the Sensor FPCB No

Reconnect or Replace the Sensor FPCB
Connection

Yes

Check the Camera module No

Reconnect the HDC10001
Connection

Yes

No
Check the voltage
Resolder or Replace U9002
C10025 : 2.8V

Yes

Check the voltage No

C10029 : 1.05V , C10028 : 1.8V Resolder or Replace U7002

Yes

No
Check the IRIS_MCLK is
Reconnect the PBA
24 Mhz (C10007)

Yes

Replace the camera module

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-19. Finger Print

Finger Print Sensor does not work

Yes

No
Check the Sensor FPCB
Connection Reconnect or Replace the Sensor FPCB

Yes

Check the voltage No

C9106 = 3.3V Check U9007 or UCP500
C9108 = 1.8V

Yes

Check U9007 No
C9109 = 3.5V over Replace U7004

Yes

Abnormal
Check sensor FPCB
Replace Sensor FPCB
(crack, damaged, etc.)

Normal

No
Check ZD9013,ZD9005 Replace the Sensor FPCB or
C9082,C9110
(SPI is OK?)
Replace UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-20-1. Main MIC

Check main microphone function

In voice call Handset mode
or voice recorder mode

Check sub board NO

Set the HDC8000 connection
Connection (HDC8000)

YES

Check the signal of

NO
C8055 = 1.8V
Resolder or replace the U8001 (Codec IC)
R8010 = 2.4MHz

YES

Replace the Sub board

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-20-2. Sub(2nd) MIC

Check sub(2nd) microphone function

In voice call LoudSPK mode
or camcording mode

YES

Check the signal of

NO
C8056, C8022, C8091= Resolder or replace the U8001(Codec IC)
1.8V
R8011 = 2.4MHz

YES

Resolder or replace the MIC8000

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-21. Speaker part

Check the speaker function,

Play MP3 with maximum volume level

Check the contact

NO
C-clips(pins) of
Resolder or replace the ANT8004, ANT8005
ANT8004, ANT8005

YES

Check the signal of

NO
C8033, C8035 = 10V
Resolder or replace the U8000 (SPK amp)

YES

Check the signals of NO

Resolder or replace the L8007, L8010
L8007, L8010

YES

Replace the SPK module

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-22. Receiver part

Check the Receiver function,

In voice call Handset mode

Check the contact

NO
C-clips(pins) of
Resolder or replace the ANT8002, ANT8003
ANT8002, ANT8003

YES

Check the signals of NO

C8073, C8075 = 10V? Resolder or replace the U8004 (RCV amp)

YES

Check the signals of NO

L8009, L8011 Resolder or replace the L8009, L8011

YES

Replace the RCV module

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-23. BT/WIFI

BT/WIFI is not working

Yes

No
Check BT or WIFI fuction ON Enable BT or WIFI function.

Yes

No
Check the Voltage on Check the U7002
C3022 = 1.8V
(Crack, open, damaged, etc)

Yes

Check the Voltage on No

R3004= Resolder or change R3004
3.7~4.3V(VBAT)

Yes

No
Check the status of Resolder or change the
ANT3000,ANT3001,ANT3002 ANT3000,ANT3001,ANT3002

Yes

Check the Status of No Resolder or Replace of

C3020,C3026,C3055,C3056,L3019, C3020,C3026,C3055,C3056,
L3025,L3036, L3019,L3025,L3036
V3001,V3004 V3001,V3004

Yes

Resolder or change U3003

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-24. GPS

GPS is not working

Yes

No
Check GPS function ON Enable GPS Function in the setting.

Yes

No 1. Resolder or Replace
Check the Antenna ANT2012, ANT2009
connection 2. Replace REAR

Yes

well.Check(crack,open,etc)
C2008, C2001,L2057, No
Resolder or change the wrong element
F2007,C2013, L2017, L2058, L2060, (open, crack, deviation, etc)
L2018,L2061,U2101, F2008

Yes

No Check OSC7000
Check 38.4MHz Clock at output
of OSC7000 (short, open, crack, etc.)

Yes

No Check AP PMIC(U7002)
Check the voltage on
L2056=1.8V (short, open, crack, etc.)

Yes

Resolder or change U2099

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-25. FM Radio

FM Radio is not working

Yes
No
Check FM Radio function ON Enable FM Radio Function in the setting.

Yes

No
Check the earphone connection Connect the earphone into the phone.

Yes

No
Check the earjack Replace the Earjack FPCB

Yes

No
Check the Sub PBA work well. Replace the Sub PBA.

Yes
No Resolder or change the wrong element
Check C4047, L4008 (open, crack, deviation, etc)

Yes

Check the voltage on

C4049=1.8V No Check AP PMIC(U7002)
C4050=2.8V (short, open, crack, etc.)
Check Reference Clock at
Yes
TP_FM_SLEEP_CLK.

Yes

Resolder or change U4011

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-26. NFC

NFC is not working

Yes

No
Check NFC function ON Enable NFC Function

Yes

No
Check the NFC FPCB Antenna Replace NFC Antenna

Yes

No
Check the Antenna connect Resolder or Replace ANT7008, ANT7011
ANT7008, ANT7011

Yes

Check the voltage on

C4503 = 1.8V No Check AP PMIC(U7002)
Check reference clock at (short, open, crack, etc.)
Short padP4507

Yes

Check C4512, R4599, L4500, C4513,

Check the NFC signal
No C4514, C4517, L4501, C4518, C4519,
at ANT7008, ANT7011
R4501, C4515, C4516
(Keystring *#6328378# ->
(crack, open, damaged, etc.)
PRBS test -> start)

Yes

Resolder or Replace U4500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-27. MST

MST is not working

Yes

No
Check the battery level
Battery >= 5% Charging the Battery

Yes

No
Check MST FPCB Antenna Replace MST Antenna

Yes

No
Check the Antenna contact
ANT7009, ANT7013 Resolder or Replace ANT7009, ANT7013

Yes

Check voltage at C7125 No

Check signal at ANT7013 Resolder or Replace U7003, U7005
(*#0*# -> MST test -> turn on
continous)

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-28-1. Charging Part

Wire Charging (Normal/Fast)

TA / USB Insert

Charging Sequence NO Reconnect TA or USB

Start C4014 = 5V or 9V or Check sub PBA

Начало последовательности зарядки C4014 = 5 В или 9 В Повторно подключите TA
или USB или проверьте

YES

NO Resolder or Replace U4001

Check the voltage
C7023 = 5V or 9V Перепаять или заменить U4001
Проверьте напряжение
C7023 = 5 В или 9 В

YES

Аккумулятор заряжается? NO Resolder or Replace U7006

Battery is Charging?
Перепаять или заменить U7006

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-28-2. Charging Part

Wirless Charging (Normal/Fast)

Contact Wireless charger

Charging Sequence NO Resolder or Replace U7005

Start C7173 = 5V or 10V

YES

Check again about NO Resolder or Replace U7006

charging status

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-29. GSM 850/900, CDMA BC0, WCDMA B5/8, LTE B5/8/12/13/17/18/19/

20/26/28 RX

NORMAL CONDITION
Catch the channel?

No
No
Check RFS 1001 ≤ -65dBm Check the ANT, Sub PBA

Yes

No Resolder or change
Check L1033 ≤-65dBm
RFS1001, C1073, C1071

Yes

No Resolder or change
Check L1041 ≤-65dBm
F1000, C1075

Yes

Check component No
soldering status ok? Resolder or change
U1090, C1074 U1090, C1074

Yes
No
Check C1074 ≤-65dBm Resolder or change
C1074, U1090

Yes

Check soldering No
status(U2099) and the Resolder or change
voltage at C2077,C2104 U2099
=1.0V & C2087=1.2V &
C2081, C2086=1.8V

Yes

No Resolder or change
Receiver is OK?
UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-30. GSM 1800/1900, WCDMA B1/2/4, TDSCDMA B39, LTE B1/2/3/4/25/39/66 RX

NORMAL CONDITION
Catch the channel?

No
No
Check RFS 1001 ≤ -65dBm Check the ANT, Sub PBA

Yes

No Resolder or change
Check L1033 ≤-65dBm
RFS1001, C1073, C1071

Yes

No Resolder or change
Check L1031 ≤-65dBm
F1000, L1029

Yes

No
Check component
soldering status ok? Resolder or change
U1095, C1114 U1095, C1114

Yes
No
Check C1114 ≤-65dBm Resolder or change
U1095, C1114

Yes

No
Check L1503 ≤-65dBm Resolder or change
F1005, L1503

Yes

Check soldering No
status(U2099) and the Resolder or change
voltage at C2077, C2104 U2099
=1.0V & C2087=1.2V &
C2081, C2086=1.8V

Yes

No Resolder or change
Receiver is OK?
UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-31. TDSCDMA B34, LTE B34 RX

NORMAL CONDITION
Catch the channel?

No
No
Check RFS 1001 ≤ -65dBm Check the ANT, Sub PBA

Yes

No Resolder or change
Check L1033 ≤-65dBm
RFS1001, C1073, C1071

Yes

No Resolder or change
Check L1031 ≤-65dBm
F1000, L1029

Yes

No
Check component
soldering status ok? Resolder or change
U1095, C1114 U1095, C1114

Yes
No
Check C1114 ≤-65dBm Resolder or change
U1095, C1114

Yes
No
Check C1100 ≤-65dBm Resolder or change
C1099, U1094

Yes

No
Check L1503 ≤-65dBm Resolder or change
F1005, L1503

Yes

Check soldering No
status(U2099) and the Resolder or change
voltage at C2077, C2104 U2099
=1.0V & C2087=1.2V &
C2081, C2086=1.8V

Yes

No Resolder or change
Receiver is OK?
UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-32. LTE B7/38/40/41 RX

NORMAL CONDITION
Catch the channel?

No
No
Check RFS 1000 ≤ -65dBm Check the ANT, Sub PBA

Yes

No Resolder or change
Check C1088 ≤-65dBm
RFS1000, C1086, L1057

Yes

No
Check component
Resolder or change
soldering status ok?
U1095, C1102
U1095, C1102

Yes

No
Check C1102 ≤-65dBm Resolder or change
U1095, C1102

Yes

No
Check L1525 ≤-65dBm Resolder or change
F1505, L1524

Yes

Check soldering No
status(U2099) and the Resolder or change
voltage at C2077, C2104 U2099
=1.0V & C2087=1.2V &
C2081, C2086=1.8V

Yes

No
Resolder or change
Receiver is OK?
UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-33. CDMA BC0, GSM 850/900, WCDMA B5/8, LTE B5/8/12/13/17/18/19/

20/26/28 DRX

NORMAL CONDITION
Catch the channel?

No

No Resolder or change
Check V2007 ≤ -65dBm ? ANT2006, ANT2007, ANT2008,
V2007

Yes

No
Check L2023 ≤ -65dBm ? Resolder or change
L2022, L2023

Yes

Check component No Resolder or change

soldering status ok? F2000, C2094
F2000, C2094

Yes

No Resolder or change
Check C2094 ≤ -65dBm ?
F2000, C2094

Yes

No
Check component soldering status OK at Resolder or change
U2091, C2119 ? U2091, C2119

Yes

No
Check C2119 ≤ -65dBm ? Resolder or change
C2119, U2091

Yes

Check soldering status(U2099) and the NO

voltage at C2077, C2104 =1.0V & Resolder or change
C2087=1.2V & C2081, C2086=1.8V U2099

Yes

NO
Resolder or change
Receiver is O.K? UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-34. GSM1800/1900, WCDMA B1/2/4, LTE B1/2/3/4/25/66 DRX

NORMAL CONDITION
catch the channel?

No

No
Check L2057 ≤ -65dBm ? Resolder or change
ANT2012, C2008, C2001

Yes

No
Resolder or change
Check L2015 ≤ -65dBm ? F2007, L2059

Yes

No
Check component soldering status OK at Resolder or change
U2100, C2139 ? U2100, C2139

Yes

No Resolder or change
Check C2139 ≤ -65dBm ?
C2139, U2100

Yes

Check soldering status(U2099) and the No

Resolder or change
voltage at C2077, C2104 =1.0V &
U2099
C2087=1.2V & C2081, C2086=1.8V

Yes

No
Resolder or change
Receiver is O.K?
UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-35. LTE B7/40 DRX

NORMAL CONDITION
catch the channel?

No

No
Check L2057 ≤ -65dBm ? Resolder or change
ANT2012, C2008, C2001

Yes

No
Resolder or change
Check L2015 ≤ -65dBm ? F2007, L2059

Yes

No
Check component soldering status OK at Resolder or change
U2100, C2146 ? U2100, C2146

Yes

No Resolder or change
Check C2146 ≤ -65dBm ?
C2146, U2100

Yes

Check soldering status(U2099) and the No

Resolder or change
voltage at C2077, C2104 =1.0V &
U2099
C2087=1.2V & C2081, C2086=1.8V

Yes

No
Resolder or change
Receiver is O.K?
UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-36. LTE 38/41 DRX

NORMAL CONDITION
catch the channel?

No

No
Check L2057≤ -65dBm ? Resolder or change
ANT2012, C2008, C2001

Yes

No
Resolder or change
Check L2015≤ -65dBm ? F2007, L2059

Yes

No
Check component soldering status OK at Resolder or change
U2100, C2144 ? U2100, C2144

Yes

No Resolder or change
Check C2144 ≤ -65dBm ?
C2144, U2100

Yes

No
Check component soldering status OK at Resolder or change
F2006, C2145 ? F2006, C2145

Yes

No Resolder or change
Check C2145 ≤ -65dBm ?
C2145, F2006

Yes

No Resolder or change
Check C2146 ≤ -65dBm ?
C2146

Yes

Check soldering status(U2099) and the

No Resolder or change
voltage at C2077, C2104 =1.0V &
C2087=1.2V & C2081, C2086=1.8V U2099

Yes

No
Resolder or change
Receiver is O.K?
U2099

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-37. TDSCDMA 34, LTE 34 DRX

NORMAL CONDITION
catch the channel?

No

No
Check L2057≤ -65dBm ? Resolder or change
ANT2012, C2008, C2001

Yes

No
Resolder or change
Check L2015≤ -65dBm ? F2007, L2059

Yes

No
Check component soldering status OK at Resolder or change
U2100, L2520 ? U2100, L2520

Yes

No Resolder or change
Check L2520 ≤ -65dBm ?
L2520, U2100

Yes

No
Check component soldering status OK at Resolder or change
F2504, L2523 ? F2504, L2523

Yes

No Resolder or change
Check L2523 ≤ -65dBm ?
F2504, L2523

Yes

No Resolder or change
Check C2139 ≤ -65dBm ?
C2139

Yes

Check soldering status(U2099) and the

No Resolder or change
voltage at C2077, C2104 =1.0V &
C2087=1.2V & C2081, C2086=1.8V U2099

Yes

No
Resolder or change
Receiver is O.K?
U2099

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-38. TDSCDMA 39, LTE 39 DRX

NORMAL CONDITION
catch the channel?

No

No
Check L2057≤ -65dBm ? Resolder or change
ANT2012, C2008, C2001

Yes

No
Resolder or change
Check L2015≤ -65dBm ? F2007, L2059

Yes

No
Check component soldering status OK at Resolder or change
U2100, L2520 ? U2100, L2520

Yes

No Resolder or change
Check L2520 ≤ -65dBm ?
L2520, U2100

Yes

No
Check component soldering status OK at Resolder or change
F2504, L2527 ? F2504, L2527

Yes

No Resolder or change
Check L2527 ≤ -65dBm ?
F2504, L2527

Yes

No Resolder or change
Check C2139 ≤ -65dBm ?
C2139

Yes

Check soldering status(U2099) and the

No Resolder or change
voltage at C2077, C2104 =1.0V &
C2087=1.2V & C2081, C2086=1.8V U2099

Yes

No
Resolder or change
Receiver is O.K?
U2099

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-39. GSM 850/900 TX

NORMAL CONDITION
Catch the channel?

No

Yes
Check RFS 1001 Check the ANT, Sub PBA
about ≥ 23dBm?

No
Yes Resolder or change
Check L1033 ≥ 23dBm
RFS1001, C1073, C1071

No
Yes Resolder or change
Check L1041 ≥ 23dBm
F1000, C1075

No

Check component No
soldering status ok? Resolder or change
U1004, C1137 U1004, C1137

Yes

Check soldering
status(U2099) and the No
Resolder or change
voltage at C2077,C2104
U2099
=1.0V & C2087=1.2V &
C2081, C2086=1.8V

Yes

No Resolder or change
Receiver is OK? UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-40. GSM 1800/1900 TX

NORMAL CONDITION
Catch the channel?

No

Yes
Check RFS 1001 Check the ANT, Sub PBA
about ≥ 23dBm?

No
Yes Resolder or change
Check L1033 ≥ 23dBm
RFS1001, C1073, C1071

No
Yes Resolder or change
Check L1031 ≥ 23dBm
F1000, L1029

No

Check component No
soldering status ok? Resolder or change
U1004, C1134 U1004, C1134

Yes

Check soldering
status(U2099) and the No
Resolder or change
voltage at C2077,C2104
U2099
=1.0V & C2087=1.2V &
C2081, C2086=1.8V

Yes

No Resolder or change
Receiver is OK? UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-41. CDMA BC0, WCDMA B5/8, LTE5/8/12/13/17/20/26/28 TX

NORMAL CONDITION
Catch the channel?

No

Yes
Check RFS 1001 Check the ANT, Sub PBA
about ≥ 23dBm?

No
Yes
Resolder or change
Check L1033 ≥ 23dBm
RFS1001, C1073, C1071

No

Check component No
soldering status ok? Resolder or change
U1090, C1070 U1090, C1070

Yes

Check soldering
status(U2099) and the
No
voltage at C2077,C2104 Resolder or change
=1.0V & C2087=1.2V & U2099
C2081, C2086=1.8V

Yes

No
Resolder or change
Receiver is OK?
UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-42. TDSCDMA B34/39, WCDMA B1/2/4, LTE B1/2/3/4/25/39/66 TX

NORMAL CONDITION
Catch the channel?

No

Yes
Check RFS 1001 Check the ANT, Sub PBA
about ≥ 23dBm?

No
Yes Resolder or change
Check L1033 ≥ 23dBm
RFS1001, C1073, C1071

No

No
Check component
soldering status ok? Resolder or change
U1095, C1089, L1058 U1095, C1089, L1058

Yes

Check soldering
status(U2099) and the
No
voltage at C2077,C2104 Resolder or change
=1.0V & C2087=1.2V & U2099
C2081, C2086=1.8V

Yes

No
Resolder or change
Receiver is OK?
UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-43. LTE B7/38/40/41 TX

NORMAL CONDITION
Catch the channel?

No

Yes
Check RFS 1000 Check the ANT, Sub PBA
about ≥ 23dBm?

No
Yes
Resolder or change
Check C1088 ≥ 23dBm
RFS1000, C1086, L1057

No

No
Check component
soldering status ok? Resolder or change
U1095, C1094, C1095 U1095, C1094, C1095

Yes

Check soldering
status(U2099) and the No
voltage at C2077,C2104 Resolder or change
=1.0V & C2087=1.2V & U2099
C2081, C2086=1.8V

Yes

No
Resolder or change
Receiver is OK?
UCP500

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-44. Force Touch

Force does not work

1. Test Path : Phone dial → *#0*#
2. Tab ‘Sub key’, and then press home button with finger.
3. Check if the display color changes blue after that.

No

Check TSP Connector on No

MAIN PBA Reconnect the HDC9000

Yes

Check No
VDD_TSP_1.8V (C9084, C9064) Resolder or Replace U9000
VDD_TSP_3.0V (C9025, C9063)

Yes

Replace the UB

Yes

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM
 WWW.AliFixit.COM
8. Level 3 Repair

8-4-45. Dex Station

Dex Station does not work

Abnormal
Check the Charging UI Check the CCIC
(U7006)

YES

Abnormal
Check the Dex UI Check the EDP AUX SW
(U4003)

YES

Abnormal
Check the IF Socket &
SUB PCB connector Replace IF Socket or SUB PCB

Normal

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

WWW.ALISALER.COM