Thiopental Sodium
Thiopental Sodium
Thiopental Sodium
Product identifier
Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses : For R&D use only. Not for medicinal, household or other use.
Uses advised against : none
Company Identification
Company : Chemicalbook
Address : Building 1, Huihuang International, Shangdi 10th Street, Haidian District, Beijing
Telephone : 400-158-6606
Label elements
Pictogram(s)
Other hazards
no data available
Substance
If inhaled
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately.
Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Following skin contact
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Following eye contact
Rinse with pure water for at least 15 minutes. Consult a doctor.
Following ingestion
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control
Center immediately.
no data available
no data available
no data available
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear
chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people
away from and upwind of spill/leak.
Environmental precautions
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-
proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws
and regulations.
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
Control parameters
Chemical Book 3
Exposure controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-
elimination area.
Eye/face protection
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Skin protection
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The
selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Respiratory protection
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
Thermal hazards
no data available
Chemical Book 4
Reactivity
no data available
Chemical stability
no data available
no data available
Conditions to avoid
no data available
Incompatible materials
no data available
no data available
Acute toxicity
Skin corrosion/irritation
no data available
no data available
no data available
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
no data available
Chemical Book 5
STOT-repeated exposure
no data available
Aspiration hazard
no data available
Toxicity
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
no data available
Disposal methods
Product
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do
not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to
make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible
for combustible packaging materials.
UN Number
ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (For reference only, please check.)
IMDG: TOXIC SOLID, ORGANIC, N.O.S. (For reference only, please check.)
IATA: TOXIC SOLID, ORGANIC, N.O.S. (For reference only, please check.)
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available
Safety, health and environmental regulations specific for the product in question
References
Disclaimer:
The information in this MSDS is only applicable to the specified product, unless otherwise specified, it is not applicable to the mixture of
this product and other substances. This MSDS only provides information on the safety of the product for those who have received the
appropriate professional training for the user of the product. Users of this MSDS must make independent judgments on the applicability
of this SDS. The authors of this MSDS will not be held responsible for any harm caused by the use of this MSDS.
Chemical Book 8