Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    Sebu7824-11 B

    Uploaded by

    liva rakotondrasoa

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sebu7824-11 B

    Uploaded by

    liva rakotondrasoa
    6 views4 pages

    Original Title

    SEBU7824-11 B

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views4 pages

    Sebu7824-11 B

    Uploaded by

    liva rakotondrasoa

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    BEFORE OPERATION

    Operation and Maintenance


    Manual Excerpt

    ® ®
    © 2010 Caterpillar
    All Rights Reserved
    SEBU7824-11
    October 2010

    Operation and
    Maintenance
    Manual
    385C Excavator and 385C MHPU
    Mobile Hydraulic Power Unit
    MMA1-Up (Machine)
    KGB1-Up (Machine)
    KBC1-Up (Machine)
    SBE1-Up (Machine)
    T2E1-Up (Machine)
    T2F1-Up (Machine)
    KKK1-Up (Machine)
    EAM1-Up (Machine)
    JCM1-Up (Machine)
    M3W1-Up (Machine)

    SAFETY.CAT.COM
    104 SEBU7824-11
    Operation Section
    Before Operation

    Operation Section Machine Access System


    Specifications

    Before Operation The machine access system has been designed to


    meet the intent of the technical requirements in “ISO
    2867 Earth-moving Machinery – Access Systems”.
    i04021647
    The access system provides for operator access to
    the operator station and to conduct the maintenance
    Mounting and Dismounting procedures described in Maintenance section.

    SMCS Code: 6700; 7000 Alternate Exit


    Machines that are equipped with cabs have alternate
    exits. For additional information, see Operation and
    Maintenance Manual, “Alternate Exit”.

    i03900822

    Daily Inspection
    SMCS Code: 1000; 6319; 6700; 7000

    NOTICE
    Accumulated grease and oil on a machine is a fire
    hazard.
    g00037860
    Illustration 71
    Typical example Remove debris with steam cleaning or high pressure
    water, at the specified interval in the Maintenance In-
    Mount the machine and dismount the machine only terval Schedule or each time any significant quantity
    at locations that have steps and/or handholds. Before of oil is spilled on the machine.
    you mount the machine, clean the steps and the
    handholds. Inspect the steps and handholds. Make
    all necessary repairs. For maximum service life of the machine, perform a
    thorough walk-around inspection before you mount
    Face the machine whenever you get on the machine the machine and before you start the engine.
    and whenever you get off the machine.
    Daily, perform the procedures that are applicable to
    Maintain a three-point contact with the steps and with your machine.
    the handholds.
    Reference: For more information, refer to Operation
    Note: Three-point contact can be two feet and one and Maintenance Manual, “Maintenance Interval
    hand. Three-point contact can also be one foot and Schedule”.
    two hands.
    Remove any trash buildup and debris. Make all
    Do not mount a moving machine. Do not dismount a necessary repairs before you operate the machine.
    moving machine. Never jump off the machine. Do
    not carry tools or supplies when you try to mount the Note: Watch closely for leaks. If you observe a leak,
    machine or when you try to dismount the machine. find the source of the leak and correct the leak. If you
    Use a hand line to pull equipment onto the platform. suspect a leak or you observe a leak, check the fluid
    Do not use any controls as handholds when you levels more frequently.
    enter the operator compartment or when you exit the
    operator compartment.
    SEBU7824-11 105
    Operation Section
    Before Operation

    Inspect the swing drive for leaks. Make any


    necessary repairs.

    Make sure that all covers and guards are securely


    attached. Inspect the covers and the guards for
    damage.

    g02143767
    Illustration 72

    Inspect the hydraulic cylinders for damage or


    for excessive wear. Inspect the linkage and the
    bucket for damage or for excessive wear. Make any
    necessary repairs.
    g00588149
    Illustration 74
    Inspect the lights for broken bulbs and for broken
    lenses. Replace any broken bulbs and any broken Inspect the steps, the walkways, and the handholds.
    lenses. Clean the steps, the walkways, and the handholds.
    Make any necessary repairs.
    Inspect the engine compartment for any trash
    buildup. Remove any trash buildup from the engine Inspect the Falling Object Protective Structure
    compartment. for damage. If repair is necessary, consult your
    Caterpillar dealer. Tighten any loose bolts.
    Inspect the cooling system for any leaks, for faulty
    hoses and for any trash buildup. Correct any leaks. Inspect the operator compartment for a buildup
    Remove any trash from the radiator. of trash. Check for a buildup of trash under the
    floorplate. Keep these areas clean.
    Inspect all of the belts for the engine attachments.
    Replace any belts that are worn, frayed, or broken. Adjust the mirrors for the correct rear view of the
    machine.

    g02143769
    Illustration 73

    Inspect the hydraulic system for leaks. Inspect the


    tank, the cylinder rod seals, the hoses, the tubes, the
    plugs, the connections, and the fittings. Correct any
    leaks in the hydraulic system.

    Inspect the final drives for leaks. Make any necessary


    repairs. Check the oil level if leakage is noticed.

    You might also like