Multiple Choice Questions

(MCQ’s)
On
ENGINEERING
METROLOGY

CERTIFICATE COURSE IN
CNC MILLING (CCCM)
AND
CERTIFICATE COURSE IN
CNC TURNING (CCCT)

Submitted By:
Jaskaran Singh
Teaching Assistant
Central Tool Room, Ludhiana
1. The degree of closeness of the measured value of a certain quantity with its true value is
known as
a. Accuracy b. Precision c. Standard d. Sensitivity

2. Error of measurement =
a. True value – Measured value b. Precision – True value
c. Measured value – Precision d. None of the above

3. The following is an internationally recognized and accepted unit system

a. MKS b. FPS c. SI d. All of the above

4. The following is a line standard of measurement

a. Measuring tape b. Slip gauge c. Micrometer d. End bars

5. _____ is equal to the differences of the two limits of size of the part
a. Tolerance b. Low limit c. High limit d. Design size

6. To check external diameter of hole, we use

a. Plug gauge b. Ring gauge
c. Slip gauge d. Standard screw pitch gauge

7. ‘GO’ and ‘NO GO’ gauge is a type of

a. Plug gauge b. Slip gauge c. Ring gauge d. Limit gauge

8. The following is not used to measure angles

a. Bevel protector’s b. Calibrated levels
c. Clinometers d. Optical flats

9. The study of scientific metrology deals with

a. Accuracy and methods of measurement
b. Standard specifications
c. Theories related to nature
d. All of the above

10. Which of the following is not a type of direct measuring instrument?

a. Micrometer b. Vernier caliper c. Divider d. All of the above

11. A micrometer screw gauge is precise to ________?

a. 0.005 mm b. 0.1 mm c. 0.05 mm d. 0.01 mm

12. In a micrometer screw gauge, the ratchet is used to

a. Turn the circular scale wrong b. Lock the spindle
c. Correct the zero error d. Apply the correct pressure

13. When the length is measured as the distance between two parallel lines, this standard is
called _______.
 a. Line Standard b. End Standard
c. Wave Standard d. None of these

14. When the distance is measured as a separation of two parallel surfaces, then this is called
_______.
a. Line Standard b. End Standard
c. Wave Standard d. None of these

15. The result of every measurement is denoted in

a. Unit b. Gauge c. Magnitude

16. The maximum amount by which the result differs from the True Value is called ____.
a. Correction b. Discrepancy
c. Error d. Accuracy

17. The number of Slip Gauges in a set are

a. 87 b. 31 c. 45 d. All of these sets are available

18. Circular Scale on the micrometer is marked on

a. Anvil b. Barrel c. Ratched d. Thumble

19. Constant measuring pressure in micrometer is ensured by

a. Lock Nut b. Barrel & Thimble
c. Spindle d. Ratched

20. The Slip Gauge was introduced by __________ engineer.

a. Swedish b. German
c. British d. American

21. The Slip Gauge is example of ________ of length.

a. Line Standard b. End Standard
c. Wave Standard d. None of these

22. For angular measurement, the ________ are used with Sine bar.
a. Slip Gauge b. Calipers
c. Scale d. Micrometer

23. The NPL gauge interferometer is designed & used for

a. Absolute measurement of length of slip gauges.
b. Judging features of surface
c. Comparing height with a standard reference
d. Measurement of fringe displacement.
24. Which of the following is true for uses of comparators?
a) Can’t be used in mass production
b) Not suitable for inspection purposes
c) Can be used as working gauge
d) Slow rate of working

25. From which category ‘Sigma comparator’ belongs?

a) Optical comparator
b) Mechanical comparator
c) Mechanical-optical comparator
d) Pneumatic comparator

26. What is the advantage of mechanical comparator over others?

a) Less moving parts
b) No need of external supply
c) No error due to parallax
d) Large range of instrument

27. Which of the following option is correct regarding characteristics of comparators?

a) Minimum inertia
b) Minimum compensation for temperature effect
c) High measuring pressure
d) Minimum versatility

28. Which of the following is not correct for pneumatic comparator?

a) Independent of operator skill
b) Loss of accuracy due to gauge wear
c) Speedy operation
d) Total life cost is less

29. Which of the following is not correct for pneumatic comparator?

a) Independent of operator skill
b) Loss of accuracy due to gauge wear
c) Speedy operation
d) Total life cost is less

30. In Back pressure type pneumatic gauge, there are two orifices. What is the relationship
between upstream pressure of first orifice and pressure between two orifices?
a) Depends upon the distance between two orifice
b) Depends upon relative size of orifice
c) Only on geometric area of first orifice
d) Distance between pressure source and first orifice
31. Function of transducer is to convert
a. Electrical signal into non electrical quantity
b. Non electrical quantity into electrical signal
c. Electrical signal into mechanical quantity
d. All of these

32. Potentiometer transducers are used for the measurement of

a. Pressure
b. Displacement
c. Humidity
d. Both (a) and (b)

33. Thermistor is a transducer. Its temperature coefficient is

a. Negative
b. Positive
c. Zero
d. None of these

34. The transducer used for the measurements is/are

a. Resistance temperature detectors
b. Thermistors
c. Ultrasonic
d. All of these

35. For the measurement of pressure the instruments used can be

a. Mechanical
b. Electro-mechanical
c. Electronic
d. All of these

36. What is the difference between CMM and UMM?

a) UMM can’t inspect geometrical features while CMM does it
b) CMM is more accurate than UMM but can’t inspect geometrical features
c) UMM is more accurate than CMM and can inspect geometrical features
d) CMM is more accurate than UMM but can’t inspect geometrical features

37. Which type of standard is UMM for calibration of hole location gauges?
a) Primary standard
b) Secondary standard
c) Basic standard
d) Reference standard
38. Which of the following is used to locate awkward shaped work pieces in UMM?
a) Swinging table
b) Tilt table
c) Rotary table
d) Angular table

39. Which of the following is used to measure macro-circuit components in UMM?

a) Telescope
b) Microscope
c) Probe tip
d) Capstan

40. Which of the following are the foundations of mechanical accuracy in UMM?
a) Geometry and length
b) Roundness, geometry and length
c) Geometry, division of circle and length
d) Roundness, geometry, division of circle and length

41. Which of the following option is true for given statements about UMM?
Statement 1: Measurement on CMM is faster than UMM.
Statement 2: UMM can resolve the exact nature of error of features of all parts.
a) T, T b) F, T c) T, F d) F, F

42. Which of the following is not true for UMM?

a) Less skilled operator is needed
b) It is a slow machine
c) Used as a special purpose machine in metrology laboratories
d) A valuable machine for comparing master gauges and length standards

43. Which of the following is a foundation of all geometrical accuracy?

a) Vertical plane
b) Flat plane
c) Rough plane
d) Oblique plane

44. Which of the following instrument is of the highest accuracy?

a) Digital length gauge
b) Inside micrometer
c) Universal measuring instrument
d) Universal height micrometer

45. Which of the following option is incorrect about universal measuring instrument?
a) Twin digital display is present
b) Highly skilled operator is required
 c) Computation capabilities
d) Automatically sense diameter of bores

46. What is the permissible measuring speed in universal measuring instrument for error free
reading?
a) 1 m/sec
b) 1 mm/sec
c) 1 cm/sec
d) 2 cm/sec

47. What precise movement does CMM have?

a) Precise movement in x coordinate
b) Precise movement in x and y coordinates
c) Precise movement in y and z coordinates
d) Precise movement in x, y and z coordinates

48. Which type of CMM is most suited for large heavy workpieces?
a) Cantilever type
b) Bridge type
c) Horizontal boring mill type
d) Floating bridge type

49. Which direction is sensed by linear measurement transducer used in CMM?

a) Positive direction only
b) Negative direction only
c) Both positive and negative direction
d) Not used to sense directions

50. What is the accuracy of present day co-ordinate measuring machine?

a) 10 microns
b) 5 microns
c) 2 microns
d) 1 micron

51. Which of the following is caused by careless handling?

a) Systematic error
b) Gross error
c) Random error
d) None of the mentioned

52. ‘A system will be error free if we remove all systematic error’. Is this statement true or
false?
a) True b) False
53. Which of the following is not a fundamental quantity?
a) Length
b) Angle
c) Time
d) Luminous intensity

54. Which of the following error is caused by poor calibration of instrument?

a) Random error
b) Gross error
c) Systematic error
d) Precision error

55. How systematic errors are eliminated?

a) Frequent measurement
b) Replacement of instrument
c) Finding mean of reading
d) Finding variance of reading

56. ‘Zero error is an indication of instrumental error’. Is the statement true or false?
a) True b) False

57. The systematic errors of an instrument can be reduced by making

a. The sensitivity of instrument to environmental input as low as possible
b. The sensitivity of instrument to environmental input as high as possible
c. Systematic errors does not depend on the sensitivity of instrument
d. None of these

58. Suitable method for the reduction of systematic errors is/are

a. Instrument must be designed carefully
b. By introducing an equal and opposite environmental input for compensating the effect
of environmental input in a measurement system
c. By adding high gain feedback to measurement system
d. All of these

59. If the instrument is used in wrong manner while application, then it will results in
a. Systematic error
b. Instrument error
c. Random error
d. Environmental error

60. Random errors in a measurement system are due to

a. Environmental changes
b. Use of uncalibrated instrument
 c. Poor cabling practices
d. Unpredictable effects

61. In a measurement system,

a. A single measurement components may have both random errors and systematic errors
b. A measurement system consists of several components with each component having
separate errors
c. Both the statement (a) & (b) are true
d. Neither statement (a) nor statement (b) are true

62. Error that occurs due to equally affected measurements is called

a. random error
b. systematic error
c. frequent error
d. precision

63. Error that occurs during measurement of quantities is

a. random error
b. systematic error
c. frequent error
d. both a and b

64. Systematic error occurred due to poor calibration of instrument that can be corrected by
a. taking several readings
b. replacing instruments
c. taking mean of values
d. taking median of values

65. Who gave the fundamental principle of straightness measurement?

a) Bryan
b) Moire
c) Euler
d) Amedeo

66. Which of the following represents the quality of straightness in precision engineering?
a) Spirit level
b) Straight edge
c) Autocollimator
d) Dial indicator

67. What is the tolerance of the straightness of a line?

a) Maximum deviation from the straight line joining two extremities
b) Maximum deviation from the middle point of straight line joining two extremities
 c) Minimum deviation from the straight line joining two extremities
d) Minimum deviation from the middle point of straight line joining two extremities

68. Which of the following is true for measurement of surface roughness?

a) 3 dimensional geometry can be easily measured
b) Direction of measurement is perpendicular to the lay
c) Direction of measurement is parallel to the lay
d) Direction of measurement is parallel to the direction of the predominant surface
marking

69. Which of the following parameter is important for specifying surface roughness?
a) Size of irregularity
b) Spacing of irregularity
c) Height of irregularities
d) Height, spacing and form of irregularities

70. What is meant by roughness?

a) Minute succession of hills of different height
b) Minute succession of valleys and hills of different height and varied spacing
c) Minute succession of valleys and hills of same height and same gap
d) Minute succession of valleys of different depth

71. Flank is a __________

a) line
b) point
c) distance
d) surface

72. For acme thread the angle between the two flanks is ____
a) 55 degrees
b) 47.5 degrees
c) 29 degrees
d) 45 degrees

73. According to Taylor's principle which type of gauge checks both size and geometric
features?
a. Go gauge
b. No go gauge
c. Both a. and b.
d. None of the above

74. What is used to measure the major diameter of an external thread?

a. Bench micrometer
b. Thread micrometer
 c. One wire method
d. All of the above

75. Which type of threads is used to transmit power in one direction?

a. Square threads
b. Buttress threads
c. Both a. and b.
d. None of the above

76. The amount by which the actual size of a shaft is less than the actual size of mating hole
in an assembly
a. Clearance
b. Interference
c. Allowance
d. None of the above

77. A positive allowance will always result in a _____ fit.

a. Clearance
b. Interference
c. both ‘a’ and ‘b’
d. Any of the above

78. A negative allowance will always result in a _____ fit.

a. Clearance
b. Interference
c. Transition
d. Any of the above

79. ‘GO’ and ‘NO GO’ gauge is a type of

a. plug gauge
b. slip gauge
c. ring gauge
d. limit gauge

80. The following is not used to measure angles

a. Bevel protectors
b. Calibrated levels
c. Clinometers
d. Optical flats

81. The following is not a method to find effective thread diameter

a. Thread micrometer
b. Two wire method
c. Three wire method
 d. The v-piece method

82. What type of thread is formed on female screw gauge?

a) External thread
b) Internal thread
c) Both internal and external
d) Major screw thread

83. Which of the following is not a name of major diameter of external thread?
a) Outside diameter
b) Crest diameter
c) Full diameter
d) Cone diameter

84. What is the alternative name of functional diameter?

a) Cone diameter
b) Virtual diameter
c) Root diameter
d) Inside diameter

85. What is thread per inch in screw thread?

a) Pitch in inches
b) Axial distance moved by threaded part
c) Reciprocal of pitch in inches
d) Radial distance moved by threaded part

86. Which of the following is not true about effective diameter?

a) Also known as pitch diameter
b) It decides quality of fit between nut and screw
c) This is the diameter of minor cylinder
d) It is a very important dimension for screw threads

87. Flanks of the threads connect the crest with the roots.
a) True
b) False

88. The gears are used to connect two parallel shafts except
a. Spur gear
b. Helical gear
c. Double helical gears
d. Bevel gears

89. The gears used to connect non-parallel and non-intersecting shafts is

a. Straight bevel gears
 b. Spiral bevel gears
c. Spiral gears
d. Double helical gears

90. To connect two intersecting shafts we use

a. Spur gear
b. Helical gear
c. Worm and wheel
d. Bevel gears

91. The gear used to convert rotary motion into translating motion is
a. Worm and wheel
b. Crown gear
c. Rack and pinion
d. Spiral Bevel gear

92. Which of the following type of gear has inclined teeth?

a. Spur gear
b. Helical gear
c. Spiral gear
d. All of the above

93. The point of contact of two pitch circles of mating gears is called
a. Pressure point
b. Pitch point
c. Module
d. Contact point

94. The circular pitch of a gear is given by

a. πd/t
b. πd/2t
c. 2πd/t
d. πd/3t
Where d=diameter of pitch circle
t=number of teeth

95. The module of a gear is given by

a. d/t
b. 2d/t
c. d/2t
d. d/3t
Where d=diameter of pitch circle
t=number of teeth

96. The clearance in toothed gear is kept as

 a. 1.50 module
b. 1.57 module
c. 1.60 module
d. 1.67 module

97. Which of the following pressure angle (in degrees) is commonly used for gears?
a. 15
b. 20
c. 25
d. 30

98. The minimum number of teeth on pinion to avoid interference in rack and pinion is
a. 15
b. 18
c. 21
d. 24
99. Diameter of pitch cylinder is known as
a) Pitch cylinders
b) Pitch diameter
c) Pitch circle
d) Pitch point

100. Two different pitch circles generally meet at

a) Pitch cylinders
b) Pitch diameter
c) Pitch circle
d) Pitch point

101. Line passing through center of rotation of two meeting gear is known as
a) Pitch line
b) Rack
c) Pinion
d) Line of centre

102. Driving gear of two mating gear which is generally small is known as
a) Pitch line
b) Rack
c) Pinion
d) Line of centre

103. Gear wheel of infinite diameter is also known as

a) Pitch line
b) Rack
 c) Pinion
d) Line of centre

104. Spur gears can be used only when the two shafts are parallel.
a) True
b) False

105. Gear drive doesn’t require precise alignment of shafts.

a) True
b) False

106. The teeth of the helical gears are cut parallel to the shaft axis.
a) True
b) False

107. The number of teeth per unit length of the pitch circle diameter is called __________.
a) diametral pitch
b) module
c) clearance
d) gear ratio

108. The ratio of the number of teeth on the gear to the number of teeth on the pinion is called
________.
a) velocity ratio
b) module
c) gear ratio
d) pitch point
109. The ratio of pitch diameter to the number of teeth is called _________
a) module
b) addendum
c) dedendum
d) backlash

110. The circle passing through the upper tips of the teeth is called ___________
a) pitch circle
b) circular pitch
c) dedendum circle
d) addendum circle

111. The radial height of a tooth above the pitch circle is called __________
a) addendum
b) dedendum
c) rack
d) line of centres
112. The circle passing through the roots of the teeth is called _____________
a) addendum
b) addendum circle
c) dedendum circle
d) rack

113. The radial depth of a tooth below the pitch circle is called _____________
a) dedendum
b) addendum
c) rack
d) line of centres

114. The radial difference between the addendum and the dedendum of the tooth is called
__________
a) Clearance
b) rack
c) line of action
d) line of centres

115. What does N, P and L mean in N.P.L. Gauge interferometer?

a) Nikon pulsed laser
b) Nuclear plasma laboratory
c) National Physics Laboratory
d) Nuclear physics laboratory

116. At which angle does a glass plate reflector set in N.P.L. interferometer?
a) 30°
b) 45°
c) 60°
d) 90°

117. Which among the following is used to create fringes in N.P.L. interferometer?
a) Condensing lens
b) Collimating lens
c) Optical flat
d) All of the above
118. In Airy Points, which of the following equation describes their location in a system with
two supports:
a) s = L/√3
b) s = L/√2
c) s= 2L/√3
d) s= 2L/√2
where, s : Distance separating the supports, L : Length of the bar
119. Bessel Points can be calculated using the following formula.
a) s=0.556L
b) s=0.557L
c) s=0.558L
d) s=0.559L

120. International yard is an example of ________ standard.

a) Line
b) End
c) Wavelength
d) None of these

121. International Protypr mete is at a temperature of ______ °C.

a) -5
b) 0
c) 10
d) 15

122. A monochromic light consists of rays of _____ wavelength

a) Same
b) Different
c) Double
d) Half

123. Interference phenomenon can be observerd with ________ source of light

a. Coherent
b. Incoherent
c. Both
d. None of these

124. Flatness is the ________ distance between two planes that cover all irregularities of the
surface under examination.
a) Equal
b) Maximum
c) Minimum

125. Optical flats are made of ______ or ______

a) Glass or Quartz
b) Diamond or Graphite
c) Pearl or Gem
d) Marble or Stones

126. Select the most appropriate answer from the following alternatives.
 Engineer’s rule is
 a. End measurement device
b. Line measurement device
c. Angle measurement Device
d. Flatness measurement device

127. A surface gauge is used mainly for

a) Scribing line perpendicular to a datum surface
b) Scribing line parallel to a datum surface
c) Scribing circle and arcs
d) Checking surface finish ready for making

128. The airy points are used to support ___________

a) Length bars
b) Cylinder
c) Sphere
d) None of these

129. Mechanical comparators generally have _______ as sensing element.

a) Plunger
b) Gauge
c) Cam
d) None of these

130. Comparators are generally sensitive to changes of the order of ______ or less.
a) 0.002mm
b) 0.01mm
c) 0.001mm
d) 0.02mm

131. Eden-Rolt comparators uses optical and _______ system of magnifications.

a) Electronic
b) Electrical
c) Mechanical
d) Computer

132. Eden-Rolt comparators uses _______ strip hinge,

a) Cross
b) Bevel
c) Pivot
d) None of these

133. Sine bars are used in conjunction with

a) Slip gauge
b) Angle gauge
 c) DTI
d) Precision block level

134. What should be the difference in heights of the two rollers to check an angle of 30 using
100 mm sine bar?
a) 20 mm
b) 30 mm
c) 40 mm
d) 50 mm

135. An autocollimator works on

a) Optical principle
b) Mechanical principle
c) Pneumatic principle
d) Electrical principle

136. The helix angle α for a screw is given by α = tan -1 _______

a)
b)
c)
d) None of these

137. The angle of ISO metric thread is _______ degree,

a) 30
b) 45
c) 60
d) 90

138. The major diameter of a screw thread is measured on a ________

a) Bench micrometer
b) Vernier caliper
c) Feeler gauge
d) Radius gauge

139. The minor diameter of a screw thread is measured on _______ machine.

a) Floating carriage diameter measuring
b) Gauge pipe diameter
c) Calipers
d) Micrometer

140. Thread micrometer can measure the ________ diameter if the thread is perfect.
a) Effective
b) Ineffective
 c) Invalid
d) Weak

141. Choose correct words/symbols/terms with reference to gear metrology.

Involute φ = (______φ ) ____
a) Sin φ
b) Cos φ
c) Tan φ
d) None of these

142. Choose correct words/symbols/terms with reference to gear metrology.

Module m = x _____
a) Circular pitch
b) Diameter pitch
c) Addendum
d) Dedendum

143. Choose correct words/symbols/terms with reference to gear metrology.

π = Pc x _______
a) Circular pitch
b) Diameter pitch
c) Addendum
d) Dedendum

144. Standard pressure angles are _______ and _______ degree.

a) 10 1/2; 15
b) 12 1/2; 15
c) 14 1/2; 20
d) 15 1/2; 20

145. Base pitch Pb = ________ x circular pitch

a) Sin φ
b) Cos φ
c) Tan φ
d) None of these

146. If two surfaces are 90° to each other they are said to be
a) Parallel
b) Intersecting
c) Perpendicular
d) None of these

147. Flatness is the extent to which the surface of component

 a) Deviates from a true plane
b) Deviates from a datum plane

148. A lobed figure has a _________ diameter

a) Constant
b) Irregular
c) Different
d) None of these

149. A squareness comparators measure the deviation from the perpendicular in ________
a) Decimal fraction of a millimeter
b) Decimal fraction of a centimeter
c) Decimal fraction of a decimeter
d) Decimal fraction of a meter

150. A lobed figure is not a _______ figure

a) Square
b) Round
c) Pentagon
d) None of these
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

English Get Started

Gauges MCQ Quiz - Objective Question with Answer for Gauges - Download Free
PDF

Last updated on Mar 6, 2024

Gauges Questions and Answers: Gauges is a scoring section of metrology and fitter; these topics are crucial
aspects of many entrance examinations. Attempt these questions to know how to solve Gauges MCQ Quiz with the
assistance of Testbook. Having clearer concepts and practising persistently could also raise one’s score and hence
the gauges MCQ Quiz are curated in a detailed, relevant and precise manner.
how to Solve Gauges MCQs: Acquire some tips and tricks and start solving the Gauges MCQ Quiz for discrete
preparation and excellent results. Increase your pace of solving questions and later check your answers through the
detailed solutions and explanations provided down below each Gauges Quiz. Nonetheless, you can download the
entire Gauges Quiz exercise as PDF, which is listed down below with their solutions and explanations or you can
also install each and every Gauges MCQ separately.

Latest Gauges MCQ Objective Questions

Gauges Question 1:

To check the perfect threading in hole following gauge is used

1. Screw pitch gauge

2. Radius gauge

3. Centre gauge

4. Screw plug gauge

Answer (Detailed Solution Below)

Option 4 : Screw plug gauge

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 1/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

English Get Started

India's Super Teachers for all

govt. exams Under One Roof
FREE Demo Classes Available*

Enroll For Free Now

Stay updated with the Fitter questions & answers with Testbook. Know more about Metrology and
ace the concept of Gauges.

Gauges Question 1 Detailed Solution

Explanation:

There are different types of cylindrical plug gauges.

Double-
ended
plug Used for checking the diameter of a straight hole. The
gauge Go-gauge checks the lower limit of a straight hole and
Progressiv the NO-Go gauge checks the upper limit.
e plug
gauge
Plain Ring
Used to check the outside diameter of the shaft.
gauge
Taper
Used to check the size of the hole and the accuracy of
plug
the taper
gauges
Taper ring Used to check both the accuracy and the outside
gauges diameter of a taper
Thread
Used to check the form and dimensional accuracy of
plug
the internal threads
gauges
Thread
Used to check the form and the dimensional accuracy
Ring
of an external thread
gauges
USed as a quick means for checking sizes within certain
Snap
limits by comparing the size of the parts with the
gauges
opening of the gauge.

There are various measuring instruments used for checking the thread.

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 2/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

Used to check the pitch of external and English Get Started

Screw pitch gauge
internal threads

Screw thread plug

Used to check the internal threads
gauge

Screw thread ring Used to check the external thread for its
gauge accuracy

Screw Used for checking external threads. This is a

thread calliper gaug highly efficient type gauge and uses more than
e ring gauge.

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 3/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

English Get Started

EE
FR
India’s #1 Learning Platform Trusted by 5.7 Crore+ Students

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 2:

Radius gauge is used to check-

1. Internal and external radius

2. Only internal radius

3. Only external radius

4. Irregular curve

Answer (Detailed Solution Below)

Option 1 : Internal and external radius

Gauges Question 2 Detailed Solution

Explanation:

Radius gauges:

Radius gauges are used to check the internal and external radius of workpieces.
These gauges are made of high-quality steel sheets and are finished to an accurate radius.
Radii of parts are checked by comparing the radius of the gauges.
Radius gauges are available in sets of several blades held in a holder.
Each blade can be separately pulled out of the holder when in use.
The size of the radius is marked on the individual blades of the gauges.
These gauges are available in different combinations with internal and external radii.
Individual gauges are also available for different radii.
The other typical applications are:
Checking the corner radius of a part being filed to shape.
Checking a radius formed by a milling cutter.
https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 4/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

English Get Started

Home Fitter Metrology Gauges Download Gauges MCQs Free PDF

EE
FR
Trusted by 5.7 Crore+ Students
India’s #1 Learning Platform

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 3:

Grade- 1 slip gauges are used in

1. Workshop by operator

2. Inspection Room

3. Either (1) or (2)

4. Neither (1) nor (2)

Answer (Detailed Solution Below)

Option 4 : Neither (1) nor (2)

Gauges Question 3 Detailed Solution

Explanation:

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 5/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

Slip gauges are classified into grades depending on their guaranteed accuracy.
Sign Up Now &
The grade defines the type of application for which a slip gauge is suited, such as inspection,
English Get Started
reference,
Daily Live Classes or calibration.
250+ Test series Study Material & PDF
Get Free Access Now
Quizzes Accordingly, slip gauges
With Detailed Analytics are designated
+ More Benefits into five grades, namely grade 2, grade 1, grade 0,
grade 00, and calibration grade.
Slip gauges or gauge blocks are used as standards for precision length measurement.
These gauges are made in sets and consist of a number of hardened blocks made of high-
grade steel with low thermal expansion.
Slip gauges are designated into five grades, namely

These is the workshop–grade slip gauges used for setting tools, and
Grade 2
cutters and checking dimensions roughly on the shop floor.

This grade is used for tool room applications for setting up a sine bar, dial
Grade 1
indicators, calibration of Vernier, micrometer instruments and so on.

This is an inspection-grade slip gauge. Limited people will have access to

Grade 0
this slip gauge and extreme care is taken to guard it against rough care.

This set is kept in the standards room and is used

Grade
for inspection/calibration of high precision only. It is also used to check
00
the accuracy of the workshop and Grade 1 slip gauges.

Calibrati
This is a special grade, with the actual sizes of slip gauges, stated on a
on
special chart supplied by the manufacturer with the set of slip gauges.
Grade

EE
FR
India’s #1 Learning Platform Trusted by 5.7 Crore+ Students

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 4:

In which gauges Go and No Go gauges come in the same end?

1. Double ended plug gauge

2. Snap gauge

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 6/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

3. Progressive gauge English Get Started

4. Depth gauge

Answer (Detailed Solution Below)

Option 3 : Progressive gauge

Gauges Question 4 Detailed Solution

Explanation:

‘Go’ and ‘No-Go’ limit gauges:

The dimensions of the ‘Go’ and ‘No-Go’ ends of gauges are determined from the limits stated
on the dimension to be gauged.
In the ‘Go’ and ‘No-Go’ method of gauging, the ‘Go’ end of the gauge must go into the feature
being checked and the ‘No-Go” end must not go into the same feature.
The dimension of the ‘Go’ end is equal to the maximum permissible dimension and that of the
‘No-Go’ end is equal to the minimum permissible dimension of the component being checked.

Types:

Cylindrical plug gauges

Double-ended plug gauge
Progressive plug gauge

Progressive plug gauge:

Progressive cylindrical plug gages are your best choice for checking parts quickly.
Both Go and No Go diameters are stepped on a single gauge member, so parts can be
inspected in one easy operation.
Members are securely attached to either a taper-lock handle or a tri-lock handle with
mounting bolts.
Progressive cylindrical plug gages are available up to 8.0" in all class tolerances and materials.
A progressive gauge has both the GO and NOGO members at the same end so that a
part may be gauged with one movement.

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 7/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

EE
FR English Get Started
Trusted by 5.7 Crore+ Students
India’s #1 Learning Platform

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 5:

According to Indian Standards, set of slip gauges has

1. 71 pieces

2. 112 pieces

3. 81 pieces

4. 120 pieces

Answer (Detailed Solution Below)

Option 2 : 112 pieces

Gauges Question 5 Detailed Solution

Explanation:

Slip gauges:

Slip gauges or gauge blocks are used as standards for precision length measurement.
These gauges are made in sets and consist of a number of hardened blocks made of high-
grade steel with low thermal expansion.
These slip gauges are available in various sets with different numbers.
A particular size can be built up by wringing individual slip gauges together.
Wringing is the act of joining the slip gauges together while building up to sizes.
As per Indian standards, a special set of slip gauges is used, which consists of 112
pieces.

No. of
Range (mm) Steps (mm)
pieces

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 8/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

1.005 __ 1 English Get Started

1.001 to 1.009 0.001 9

1.01 to 1.49 0.01 49

0.5 to 24.5 0.5 49

25 to 100 25.5 4

Total pieces 112

EE
FR
India’s #1 Learning Platform Trusted by 5.7 Crore+ Students

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Top Gauges MCQ Objective Questions

Gauges Question 6 Download Solution PDF

What is the cross-sectional size of a slip gauge?

1. 42 mm × 9 mm

2. 22 mm × 9 mm

3. 32 mm × 9 mm

4. 52 mm × 9 mm

Answer (Detailed Solution Below)

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 9/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

Option 3 : 32 mm × 9 mm
English Get Started

Gauges Question 6 Detailed Solution Download Solution PDF

Explanation:

Slip gauges or gauge blocks are used as standards for precision length measurement.
Gauge blocks or slip gauges are made of a special steel alloy.
These gauges are made in sets and consist of a number of hardened blocks made of high-
grade steel with low thermal expansion.
Slip gauges are rectangular blocks of hardened and stabilized high-grade steel or zirconium
oxide (ZrO2).
The cross-sectional size of a slip gauge is 32 × 9 mm means they have 9 mm wide and
30 to 35 mm long cross-sections.

Download Solution PDF Share on Whatsapp

EE
FR
Trusted by 5.7 Crore+ Students
India’s #1 Learning Platform

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 7 Download Solution PDF

Wear allowance is provided on

1. Go gauge

2. No go gauge

3. Both Go and No Go gauge

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 10/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

4. When both are combined in one gauge English Get Started

Answer (Detailed Solution Below)

Option 1 : Go gauge

Gauges Question 7 Detailed Solution Download Solution PDF

The GO plug gauge is the size of the low limit of the hole while the NOT GO plug gauge corresponds
to the high limit of the hole.

GO gauges which constantly rub against the surface of the parts in the inspection are subjected to
wear and lose their initial size. The size of go plug gauge is reduced. To increase the service life of
gauges wears allowance is added to the go gauge in the direction opposite to wear. Wear allowance
is usually taken as 5% of the work tolerance.

Download Solution PDF Share on Whatsapp

EE
FR
Trusted by 5.7 Crore+ Students
India’s #1 Learning Platform

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 8 Download Solution PDF

The length of the sine bar is the distance between

1. Center-to-center distance between rollers

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 11/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

2. Out-of-distance distance between rollers. English Get Started

3. Diagonal cross-length of sine bar

4. One end at the other end of the sign bar

Answer (Detailed Solution Below)

Option 1 : Center-to-center distance between rollers

Gauges Question 8 Detailed Solution Download Solution PDF

Explanation:

A sine bar is a precision measuring instrument for checking and setting angles.
The size of a sine bar is specified by its length.
The length of the sine bar is the distance between the centers of the rollers.
The commonly available sizes are 100 mm, 200 mm, 250 mm, and 500 mm.
A sine bar is used to measure angles based on the sine principle.
Its upper surface forms the hypotenuse of a triangle formed by a steel bar terminating in a
cylinder near each end.
When one of the cylinders, called a roller, is resting on a flat surface, the bar can be set at any
desired angle by simply raising the second cylinder.
The required angle is obtained when the difference in height between the two rollers is equal
to the sine of the angle multiplied by the distance between the centers of the rollers.

sin θ = h
L

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 12/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

English Get Started

Download Solution PDF Share on Whatsapp

EE
FR
Trusted by 5.7 Crore+ Students
India’s #1 Learning Platform

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 9 Download Solution PDF

What is the most commonly standard length of a feeler gauge blade?

1. 25 mm

2. 65 mm

3. 100 mm

4. 50 mm

Answer (Detailed Solution Below)

Option 3 : 100 mm

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 13/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

Gauges Question 9 Detailed Solution English DownloadGet

Solution PDF
Started

Concept:

A feeler gauge is a tool used to measure gap widths.

Feeler gauges are mostly used in engineering to measure the clearance between two parts
like spark plug gaps, bearing clearance, the gap between the mating parts, etc.
They consist of a number of small lengths of steel of different thicknesses with measurements
marked on each piece.
Blade length – Standard blade lengths are typically around 3-5 inches (75 - 127 mm), but
long blades might be 12 inches (304.8 mm) and shorter blades around ¾ - 1 inch.
The most common standard length of a feeler gauge blade is 100 mm

Download Solution PDF Share on Whatsapp

EE
FR
Trusted by 5.7 Crore+ Students
India’s #1 Learning Platform

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 10 Download Solution PDF

‘GO’ and ‘NO GO’ gauge is a type of

1. Limit gauge

2. Ring gauge

3. Slip gauge

4. Plug gauge

Answer (Detailed Solution Below)

Option 1 : Limit gauge

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 14/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

Gauges Question 10 Detailed Solution English DownloadGet

Solution PDF
Started

Explanation:

Components manufactured using mass production methods are checked only to ensure that
the sizes are within the prescribed limits.
The most economical method of checking such components is by using limit gauges.
These gauges are used in inspection because they provide a quick means of checking.

Go and No Go principle:

The Go and No -Go principle of gauging is that the Go - end of the gauge must go into the
feature of the component being checked and the No - Go end must not go into the same
feature.
The dimensions of the Go and No - Go ends of gauges are determined from the limits stated
on the dimension of the component to be gauged.
The dimension of the Go-end is equal to the minimum permissible dimension and that of the
No -Go end is equal to the maximum permissible dimension.

Download Solution PDF Share on Whatsapp

EE
FR
India’s #1 Learning Platform Trusted by 5.7 Crore+ Students

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 11 Download Solution PDF

Hardness of slip gauges should be,

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 15/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

1. 55 HRC English Get Started

2. 58 HRC

3. 64 HRC

4. 50 HRC

Answer (Detailed Solution Below)

Option 3 : 64 HRC

Gauges Question 11 Detailed Solution Download Solution PDF

Explanation:

Slip gauges or gauge blocks are used as standards for precision length measurement.
Gauge blocks or slip gauges are made of a special steel alloy.
These gauges are made in sets and consist of a number of hardened blocks made of high-
grade steel with low thermal expansion.
Slip gauges are rectangular blocks of hardened and stabilized high-grade steel or zirconium
oxide (ZrO2).
The cross-sectional size of a slip gauge is 32 × 9 mm means they have 9 mm wide and 30 to 35
mm long cross-section.
The hardness of slip gauges should be more than 63 HRC.

Download Solution PDF Share on Whatsapp

EE
FR
India’s #1 Learning Platform Trusted by 5.7 Crore+ Students

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 12 Download Solution PDF

Clearance between the mating parts is measured using

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 16/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

1. Dial gauge English Get Started

2. Go - gauge

3. No – go gauge

4. Feeler gauge

Answer (Detailed Solution Below)

Option 4 : Feeler gauge

Gauges Question 12 Detailed Solution Download Solution PDF

A feeler gauge is a tool used to measure gap widths. Feeler gauges are mostly used in engineering
to measure the clearance between two parts.

They consist of a number of small lengths of steel of different thicknesses with measurements
marked on each piece.

The Go and No -Go principle of gauging is that the Go - end of the gauge must go into the feature
of the component being checked and the No - Go end must not go into the same feature.

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 17/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

English Get Started

Download Solution PDF Share on Whatsapp

EE
FR
India’s #1 Learning Platform Trusted by 5.7 Crore+ Students

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 13 Download Solution PDF

The main purpose of using Go and No Go gauge is to use it as _____?

1. limit gauge

2. radius gauge

3. pitch gauge

4. slip gauge

Answer (Detailed Solution Below)

Option 1 : limit gauge

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 18/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

Gauges Question 13 Detailed Solution English DownloadGet

Solution PDF
Started

Explanation:

Components manufactured using mass production methods are checked only to ensure that
the sizes are within the prescribed limits.
The most economical method of checking such components is by using limit gauges.
These gauges are used in inspection because they provide a quick means of checking.

Go and No Go principle:

The Go and No -Go principle of gauging is that the Go - end of the gauge must go into the
feature of the component being checked and the No - Go end must not go into the same
feature.
The dimensions of the Go and No-Go ends of gauges are determined from the limits stated on
the dimension of the component to be gauged.
The dimension of the Go-end is equal to the minimum permissible dimension and that of the
No-Go end is equal to the maximum permissible dimension.

Download Solution PDF Share on Whatsapp

EE
FR
India’s #1 Learning Platform Trusted by 5.7 Crore+ Students

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 14 Download Solution PDF

The minimum material condition for hole in NOGO gauge is ______ .

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 19/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

1. allowance English Get Started

2. lower limit

3. tolerance

4. upper limit

Answer (Detailed Solution Below)

Option 4 : upper limit

Gauges Question 14 Detailed Solution Download Solution PDF

Explanation:

Go gauge: A go Gauge will check all the dimensions of the workpiece in what is called the
maximum metal condition (indicating the presence of the greatest amount of material permitted at a
prescribed surface).

Maximum material condition:

For hole: lower limit

For shaft: upper limit

NoGo gauge: No Go Gauges shall check only one dimension of the workpiece at a time, for the
minimum metal conditions (indicating the presence of the least amount of material permitted at a
prescribed surface) size.

Minimum material condition:

For hole: upper limit

For shaft: lower limit

Important Points
Tolerance is the difference between the upper limit and the lower limit of a dimension.

The allowance is the amount of designed (intentional) deviation between two mating dimensions in
a fit. It is calculated as the difference between the maximum shaft size and the minimum hole size is
known as allowance.

Download Solution PDF Share on Whatsapp

EE
FR
Trusted by 5.7 Crore+ Students
India’s #1 Learning Platform

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 20/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

Start Complete Exam Preparation

English Get Started
Daily Live Practice Question Mock Tests &
MasterClasses Bank Quizzes

Get Started for Free

Gauges Question 15 Download Solution PDF

A feeler gauge is used for

1. Checking accuracy of holes

2. Checking gap between the mating parts

3. Checking radii of jobs

4. Adjusting the parts for play

Answer (Detailed Solution Below)

Option 2 : Checking gap between the mating parts

Gauges Question 15 Detailed Solution Download Solution PDF

Explanation:

Feeler gauge

A feeler gauge is a tool used to measure gap widths.

Feeler gauges are mostly used in engineering to measure the clearance between two
parts.
They consist of a number of small lengths of steel of different thicknesses with measurements
marked on each piece.

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 21/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

English Get Started

There are different types of cylindrical plug gauges used for different purposes..

Double-ended
plug gauge Used for checking the diameter of a straight hole. The Go-gauge checks the lower
Progressive limit of a square hole and the NO-Go gauge checks the upper limit.
plug gauge
Plain Ring
Used to check the outside diameter of the workpieces.
gauge
Taper plug
Used to check the size of the hole and the accuracy of the taper hole
gauges
Taper ring
Used to check both the accuracy and the outside diameter of a taper
gauges
Thread plug
Used to check the form and dimensional accuracy of the internal threads
gauges
Thread Ring
Used to check the form and the dimensional accuracy of an external thread
gauges
Used as a quick means for checking sizes within certain limits by comparing the size
Snap gauges
of the parts with the opening of the gauge.

Download Solution PDF Share on Whatsapp

EE
FR
India’s #1 Learning Platform Trusted by 5.7 Crore+ Students

Start Complete Exam Preparation

Daily Live Practice Question Mock Tests &

MasterClasses Bank Quizzes

Get Started for Free

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 22/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

English Get Started

Exam Preparation
Simplified
Learn, practice, analyse and improve

Get Started for Free

Trusted by 5.7 Crore+ Students

Related MCQ

Surface Roughness MCQ

Limits and Fits MCQ

Exams

UGC NET UPSC CSE JSSC JE Chandigarh Police

UPPCS EPFO SSA Bihar Police Constable Constable
AFCAT UPSC CDS Indian Navy SSR DFCCIL Executive
SSC GD Constable RRB JE IDBI Executive Bihar Primary Teacher
SSC JE Delhi Police Constable DSSSB TGT Haryana CET Group D
IBPS PO JSSC CGL Bihar Teacher DFCCIL Junior Executive
SBI PO UP Police Constable UPSSSC VDO EMRS TGT
UPSC EPFO IBPS SO UPSC CAPF AC EMRS PGT
SBI Clerk DDA JE IBPS RRB Office Assistant SSC MTS & Havaldar
UGC CSIR NET IBPS RRB PO Bihar Police SI Bihar Secondary Teacher
UPSC NDA RRB ALP Indian Navy Chargeman Bihar Senior Secondary
SSC CPO BPSC Exam BSF RO Teacher
RBI Assistant Indian Navy MR DSSSB PGT UTET

Test Series

CTET Mock Test JEE Main Mock Test IBPS PO Mock Test UGC NET Paper 1 Mock
CUET Mock Test SSC CHSL Mock Test IBPS Clerk Mock Test Test
NEET Mock Test NDA Mock Test SBI PO Mock Test AFCAT Mock Test

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 23/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

RRB Group D Mock Test REET Test Series CUET Physics Mock Test MAH MBS CST Mock Test
AMCAT Mock Test RRB NTPC Mock Test English
Haryana CET Mock Test UGC NETGet Started
English Mock
LIC AAO Mock Test LIC ADO Mock Test Indian Army GD Mock Test Test
TCS Mock Test UGC NET Commerce Mock UPPCL Executive Assistant CUET Political Science
CDS Mock Test Test Mock Test Mock Test
MP GK Mock Test CAT Exam Mock Test ECGC PO Mock Test FCI Manager Mock Test
TCS NQT Mock Test CUET Maths Mock Test NIMCET Mock Test CUET Chemistry Mock Test
IBPS RRB PO Mock Test SSC GD Constable Mock CUET Economics Mock IB Security Assistant Mock
SSC Stenographer Mock Test Test Test
Test IBPS SC Mock Test CUET History Mock Test CSIR NET Life Science
WB TET Mock Test ESIC SSO Mock Test NABARD Development Mock Test
RBI Assistant Mock Test Infosys Mock Test Assistant Mock Test UTET Test Series
SuperCoaching

UPSC Coaching AFCAT Coaching EMRS TGT and PGT RBI Assistant Coaching
BPSC Coaching Haryana CET Group D Coaching EPFO SSA Coaching
SSC JE Electrical Coaching Coaching Bihar Police Constable UP Police constable
SSC JE Mechanical DFCCIL Junior Executive Coaching Coaching
Coaching Coaching SSC MTS Coaching EMRS Accountant
SSC JE Civil Coaching DFCCIL Operations & BD SSC GD Coaching Coaching
UGC NET Coaching Coaching SSC CHSL Coaching RPSC Assistant Professor
CSIR NET Coaching DFCCIL Executive Delhi Police Constable Political Science Coaching
CTET Coaching Coaching Coaching IBPS Clerk Coaching
SSC Coaching Bihar Primary Teacher SSC IMD Coaching MP Police Constable
Railway Coaching Coaching SSC CGL Tier 2 Coaching Coaching
Bank Exams Coaching Chandigarh Police SSC Selection Post
NDA Coaching Constable Coaching Coaching
CDS Coaching JSSC JE Coaching UPSC CAPF AC Coaching

Previous Year Papers

UPSC CSE Previous Year SSC CHSL Previous Year Maharashtra FOREST Bihar Police SI Previous
Papers Papers GUARD Previous Year Year Papers
SSC CGL Exam Previous SSC CPO Previous Year Papers SSC Havaldar Previous
Year Papers Papers UP Police Constable Year Papers
UGC NET Previous Year UPSC NDA Previous Year Previous Year Papers UPSC CAPF AC Previous
Papers Papers UPSC CSAT Question Year Papers
Delhi Police Constable CDS Previous Year Papers Paper Indian Airforce Agniveer
Previous Year Papers AFCAT Previous Year Maharashtra Talathi Previous Year Papers
RRB Office Assistant Papers Previous Year Papers OSSC CGL Previous Year
Previous Year Papers MP Police Constable CSIR NET Previous Year Papers
IBPS RRB PO Previous Year Previous Year Papers Papers EPFO SSA Previous Year
Papers Chandigarh Police RBI GRADE B Previous Year Papers
Bihar Police Constable Constable Previous Year Papers UP Police SI Previous Year
Previous Year Papers Papers IBPS CLERK Previous Year Papers
SSC MTS Previous Year DDA ASO Previous Year Papers SSC JE Previous Year
Papers Papers Papers

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 24/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

SSC JE ME Previous Year SSC JE EE Previous Year SSSC JE CE Previous Year

Papers Papers Papers English Get Started

Latest Updates

EPFO Personal Assistant EMRS Hostel Warden BEML ITI Trainee Admit ITBP Tradesman Result
ESIC Nursing Officer Answer Key Card Haryana PGT Subject
BSPHCL JE EE BIhar Senior Secondary OPSC Dental Surgeon Knowledge Test Date
BSPHCL Technician Teacher 2nd Provisional Reject List IOB SO
WB Police Constable Answer Key APPSC Group 2_(State SSC MTS Exam Dates 2024
UPSSSC JE UP Polytechnic Lecturer PSC) SSC CGL Exam Dates 2024
Kolkata Police Constable MSEDCL Junior Assistant OSSC Combined SSC Stenographer Exam
UPPSC APS Result SSC Head Constable Result Technician Dates 2024
WB Gram Panchayat APSC Assistant Engineer Services_(Engineering) SSC GD Constable Exam
BDL MT Result Last Date Extended BARC DAE Dates 2024
TNPSC AAO Admit Card MP High Court District RPSC RAS Final Marks WRD Maharashtra
MHSRB Staff Nurse Final Judge Answer Key HPPSC HPAS Mains Admit Enumalator
Selection List UPPSC Staff Nurse Card JSSC Inter Level
Bihar Police Prohibition SI UKPSC JE Exam Dates IOCL Apprentice Admit Bihar Teacher Admit Card
Marksheet Bombay High Court Card WBPSC Junior Inspecting
UIIC Assistant Stenographer OPSC Ayurvedic Officer Officer
PGCIL Junior Technician BEML Diploma Trainee Admit Card Employment News PDF
Trainee Admit Card Admit Card UPSC IES Final Result

Skill Academy

Data Science with Python Business Analyst Course Full Stack Development
Course Digital Marketing Course Course

MCQ Questions

JAVA MCQ Software Engineering Economics MCQ Agriculture MCQ

Python MCQ MCQ Constitution of India MCQ Statistics MCQ
HTML MCQ Software Testing MCQ Cost Accounting MCQ Geography MCQ
Javascript MCQ Computer Fundamentals Project Management MCQ Chemistry MCQ
MS Word MCQ MCQ Engineering Mechanics Biology MCQ
Research Methodology Computer Graphics MCQ MCQ
MCQ Economy MCQ Determiners MCQ

Company Products Our Apps

About us Test Series

Testbook App
Careers We are hiring Testbook Pass
Download now
Testbook Edu Solutions Pvt. Teach Online on Online Courses
Ltd. Testbook Online Videos Current Affairs

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 25/26
6/6/24, 8:16 AM Gauges MCQ [Free PDF] - Objective Question Answer for Gauges Quiz - Download Now!

1st & 2nd Floor, Zion Partners Practice Download now

Building, Media Blog English Get Started
Follow us on
Plot No. 273, Sector 10, Sitemap Refer & Earn
Kharghar, Books
Navi Mumbai - 410210

[email protected]
Toll Free:
1800 833 0800
Office Hours: 10 AM to 7 PM
(all 7 days)

Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved User Policy Terms Privacy

https://testbook.com/objective-questions/mcq-on-gauges--5eea6a0c39140f30f369e11e 26/26