Admiral English 02

From Serial Number (Ref No1*)

*See Serial Number Page in Spare
Parts List or call manufacturer

Register 86401310-C 07/17/19

your product
www.kaercher.com/welcome
Machine Data Label

This carpet extractor is an electrical powered, portable carpet extractor intended for commercial use. The
appliance sprays a cleaning solution onto the carpet agitates the wet carpet, and then extracts the soiled solution
back into the unit's recovery tank. The appliance is fitted with and a hand tool for cleaning upholstery and stairs.

MODEL: ADM8 1.008-017.0

2 86401310 Operators Manual - ADM8 115V

 Table of Contents

Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
How To Use This Manual . . . . . . . . . . . . . . . . . . . . . 4

Safety
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . 5
HAZARD INTENSITY LEVEL . . . . . . . . . . . . . . . . . . 7
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Grounding Instructions . . . . . . . . . . . . . . . . . . . . . . 10

Operations
Technical Specifications . . . . . . . . . . . . . . . . . . . . . 12
Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Filling the Admiral . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Machine Operation . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cleaning Procedure . . . . . . . . . . . . . . . . . . . . . . . . 20
Accessory Tool Usage . . . . . . . . . . . . . . . . . . . . . . 23

Maintenance
Service Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Periodic Maintenance . . . . . . . . . . . . . . . . . . . . . . . 25
Daily / Regular Maintenance. . . . . . . . . . . . . . . . . . 25
Vacuum Motor Replacement . . . . . . . . . . . . . . . . . 26
Belt Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Solution Pump Replacement . . . . . . . . . . . . . . . . . 28
Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . 29
Suggested Spare Parts. . . . . . . . . . . . . . . . . . . . . . 30

86401310 Operators Manual - ADM8 115V 3

How To Use This Manual

This manual contains the following sections: The SAFETY section contains important information
regarding hazardous or unsafe practices of the
• How to Use This Manual
machine. Levels of hazards are identified that could
• Safety result in product damage, personal injury, or severe
• Operations injury resulting in death.
• Maintenance
The OPERATIONS section is to familiarize the operator
• Suggested Spare Parts with the operation and function of the machine.
The HOW TO USE THIS MANUAL section will tell you The MAINTENANCE section contains preventive main-
how to find important information for ordering correct tenance to keep the machine and its components in
repair parts. good working condition. They are listed in this general
Parts may be ordered from authorized dealers. When order:
placing an order for parts, the machine model and • Periodic
machine serial number are important. Refer to the
• Daily/Regular
MACHINE DATA box which is filled out during the
installation of your machine. The MACHINE DATA box • Troubleshooting
is located on the inside of the front cover of this manual.
NOTE: If a service or option kit is installed on your
Model: machine, be sure to keep the KIT INSTRUCTIONS
Date of Purchase: which came with the kit. It contains replacement parts
Serial Number: numbers needed for ordering future parts.
Dealer:
Address: NOTE: The manual part number is located on the lower
Phone Number: right corner of the front cover.
Sales Representative:

The model and serial number of your machine is

located on the back of the machine.

4 86401310 Operators Manual - ADM8 115V

 Safety

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic precaution
must always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Connect to a properly grounded outlet. See Grounding Instructions.

Do not leave the machine unattended. Unplug machine from outlet when not in use and before maintenance or
service.
Use only indoors. Do not use outdoors or expose to rain.
Do not allow machine to be used as a toy. Close attention is necessary when used by or near children.
Use only as described in this manual. Use only manufacturer’s recommended components and attachments.
Do not use damaged electrical cord or plug. Follow all instructions in this manual concerning grounding the
machine. If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into
water, return it to an authorized service center.
Do not pull or carry machine by electrical cord, use as a handle, close a door on cord, or pull cord around sharp
edges or corners.
Do not run machine over cord. Keep cord away from heated surfaces.
Do not unplug machine by pulling on cord. To unplug, grasp the electrical plug, not the electrical cord.
Do not handle the electrical plug or machine with wet hands.
Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.
This machine is intended for cleaning carpet only.
Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
This machine is not suitable for picking up health endangering dust.
Turn off all controls before unplugging.
Do not operate this machine near flammable fluids, dust or vapors.
Maintenance and repairs must be done by qualified personnel.
If foam or liquid comes out of machine, switch off immediately.

READ AND SAVE THESE INSTRUCTIONS

86401310 Operators Manual - ADM8 115V 5

Safety

IMPORTANTES MESURES DE SÉCURITÉ

L’utilisation d’un appareil électrique demande certaines précautions:
LIRE TOUTES LES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER (CET APPAREIL).

Pour réduire les risques d’incendie, de choc électrique ou

de blessure:
Cet appareil ne doit être connecter qu a des prises ayant une sortie de terre.
Ne pas laisser l’appareil sans surveillance lorsqu’il est branché. Débrancher lorsque l’appareil n’est pas utilisé et
avant l’entretien.
Pour reduire les risques de choc electrique, ne pas utiliser à l exterieur et ne pas aspirer de matières humides.
Ne pas permettre aux enfants de jouer avec l’appareil. Une attention particulière est nécessaire lorsque l’appareil
est utilisé par des enfants ou à proximité de ces derniers.
Utiliser cet appareil conformément aux instructions du présent manuel uniquement. N'utiliser que les composants
et les accessoires conseillés par le fabricant.
Ne pas utiliser si le cordon ou la fiche est endommagé. Retourner l’appareil à un atelier de réparation s’il ne
fonctionne pas bien, s’il est tombé ou s’il a été endommagé, oublié à l’extérieur ou immergé.
Ne pas tirer soulever ou traîner l’appareil par le cordon. Ne pas utiliser le cordon comme une poignée, le coincer
dans l’embrasure d’unée porte ou l’appuyer contre des arêtes vives ou des coins. Ne pas faire rouler l’appareil sur
le cordon.
Garder le cordon à l’écart des surfaces chaudes.
Ne pas débrancher en tirant sur le cordon. Tirer plutôt la fiche.
Ne pas toucher la fiche ou l’appareil lorsque vos mains sont humides.
N’insérer aucun objet dans les ouvertures. Ne pas utiliser l’appareil lorsqu’une ouverture est bloquée. S’assure
que de la poussière, de la peluche, des cheveux ou d’autres matières ne réduisent pas le débit d’air.
Cette machine est destinée pour nettoyer le tapis seulement.
Ne pas aspirer de matiéres en combustion ou qui dégagent de la fumée, comme des cigarettes, des allumettes ou
des cendres chaudes.
Cette machine n’est pas adaptée au ramassage de poussières dangereuses.
Mettre toutes les commandes à la position ARRÊT avant de débrancher l’appareil.
Ne pas aspirer des liquides inflammables ou combustibles, comme de l’essence, et ne pas faire fonctionner dans
des endroits où peuvent se trouver de tels liquides.
L’entretien et les réparations de la machine doivent être effectuées par un personnel qualifié.
Si de la mousse ou du liquide sort de la machine, la mettre hors tension immédiatement.

CONSERVER CES INSTRUCTIONS

6 86401310 Operators Manual - ADM8 115V

 Safety

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR
SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.
Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating
condition. Following is information that signals some potentially dangerous conditions to the operator or the
equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the
machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:
DO NOT OPERATE MACHINE:
Unless Trained and Authorized.
Unless Operation Guide is Read and understood.
In Flammable or Explosive areas.
In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine.
Use manufacturer approved replacement parts.

86401310 Operators Manual - ADM8 115V 7

Safety

Les symboles ci-dessous sont utilisés à travers ce manuel comme illustré dans leurs descriptions :

DEGRÉS DE RISQUES EN CAS DE DANGER

Il existe trois degrés de risques identifiés par les termes signalétiques –AVERTISSEMENT et ATTENTION
et POUR VOTRE SÉCURITÉ. Le degré de risque est défini de la manière suivante :

AVERTISSEMENT - Dangers ou méthodes dangereuses qui POURRAIENT provoquer de graves blessures ou

entraîner la mort.

ATTENTION - Dangers ou méthodes dangereuses qui pourraient provoquer des blessures légères ou une
détérioration du produit ou des biens immobiliers.

POUR VOTRE SÉCURITÉ : ce signe permet d’identifier les mesures de précaution à prendre
pour assurer un bon fonctionnement du matériel.
Rendre compte immédiatement d’une défaillance ou d’une détérioration de la machine. Ne pas utiliser la machine si celle-
ci ne fonctionne pas correctement. Lire soigneusement les informations ci-dessous signalant certains dangers potentiels
pour l’opérateur de la machine. L’opérateur doit être absolument au courant de ces dangers potentiels. Localiser tous les
dispositifs de sécurité sur la machine. Il est conseillé de prendre les mesures nécessaires pour former le personnel
opérateur.

POUR VOTRE SÉCURITÉ :

NE PAS MANOEUVRER LA MACHINE :
Lorsqu’on n’est pas expérimenté ou qualifié.
Lorsque le guide d’utilisation n’est pas été lu ou compris.
Dans des zones inflammables ou explosives.
Dans des zones où des objets peuvent tomber.

LORS DE L’ENTRETIEN DE LA MACHINE :

Éviter les parties amovibles. Ne pas porter de vêtements amples, tels que des vestes, des chemises ou des
vêtements avec manches lors de l’utilisation de la machine. Utiliser les pièces détachées homologuées.

8 86401310 Operators Manual - ADM8 115V

 Safety

Safety Labels
These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible,
promptly replace them.

EMPLACEMENT DE L'ÉTIQUETTE DE SÉCURITÉ

REMARQUE : Ces dessins indiquent l'emplacement des étiquettes de sécurité sur la machine. Si, à tout moment,
les étiquettes deviennent illisibles, contactez votre représentant autorisé pour un remplacement rapide.

Warning Label
86242230

86401310 Operators Manual - ADM8 115V 9

Safety

THIS PRODUCT IS FOR COMMERCIAL USE Proper Grounding

ONLY.
Grounding Pin
Electrical GROUNDING CONNECTION
USING AN ADAPTOR
In the USA this machine operates on a standard 15 Grounded
Grounded Outlet Box
amp 115V, 60 hz, A.C. power circuit.The amp, hertz, Outlet Adaptor
and voltage are listed on the data label found on each FIGURE A
machine. Using voltages above or below those
indicated on the data label will cause serious damage
to the motors. Metal Screw
Adaptor FIGURE B

Grounding Instructions Tab for Grounding

Screw
This appliance must be grounded. If it should FIGURE C
malfunction or break down, grounding provides a path
Note: Adaptors are not allowed in Canada.
of least resistance for electric current to reduce the risk
of electric shock. This appliance is equipped with a
cord having an equipment-grounding conductor and
grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and Improper connection of the equipment-grounding
ordinances. conductor can result in a risk of electric shock. Check
This appliance is for use on a nominal 115-volt circuit, with a qualified electrician or service person if you are
and has a grounded plug that looks like the plug in “Fig. in doubt as to whether the outlet is properly grounded.
A”. A temporary adapter that looks like the adapter in Do not modify the plug provided with the appliance - if it
“Fig . C” may be used to connect this plug to a 2-pole will not fit the outlet, have a proper outlet installed by a
receptacle as shown in “Fig. B”, if a properly grounded qualified electrician.
outlet is not available. The temporary adapter should
be used only until a properly grounded outlet (Fig. A)
can be installed by a qualified electrician. The green
colored rigid ear, lug, or the like extending from the Le raccordement incorrect du conducteur de terre
adapter must be connected to a permanent ground d'équipement peut entraîner des risques
d'électrocution. Vérifiez auprès d'un électricien qualifié
such as a properly grounded outlet box cover.
ou d'un responsable de l'entretien si vous avez
Whenever the adapter is used, it must be held in place
quelque doute que ce soit quant au raccordement à la
by a metal screw. terre de votre prise murale. Ne modifiez pas la fiche
fournie avec l'appareil : si elle ne correspond pas à la
prise murale, faites installer une prise adéquate par un
électricien qualifié.

10 86401310 Operators Manual - ADM8 115V

 Notes

86401310 Operators Manual - ADM8 115V 11

Operations

Technical Specifications

ITEM DIMENSION / CAPACITY

Height 42” (107 cm)
Length 35” (89 cm)
Width 18.5” (47 cm)
Weight 92 lbs (42 kg)
Wheels (2) 10” dia. (25 cm) wheels by 2”
Vacuum Shoe 17” (43.18 cm) cast aluminum with spring loaded down pressure
Solution Spray 2 quick change jets
Power Cable 50’ (12.7 m) (14 gauge)
Electrical 115V, 15 A, 60 Hz
Electric Vacuum Motor (1) - 3 stage, 1 hp, 99 cfm (2.80 cubic meters/min.) Waterlift - 117” (297 cm)
Brush (1) 15” (38.1 cm)
Brush Speed 1000 rpm
Solution Pump 100 PSI, Diaphragm style, Internal bypass
Solution Capacity 8 gallons (30.3 ltr)
Recovery Capacity 8 gallons (30.3 ltr)

12 86401310 Operators Manual - ADM8 115V

Operations

42”
(107cm)

35” 18.5”
(89cm) (47cm)

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.

Cet appareil n'est pas prévu à l'usage des personnes (enfants y compris) avec des possibilités physiques, sensori-
elles ou mentales réduites, ou le manque d'expérience et de connaissance, à moins qu'ils aient été donnés la
surveillance ou l'instruction au sujet de l'utilisation de l'appareil par une personne chargée de leur sûreté. Des
enfants devraient être dirigés pour s'assurer qu'ils ne jouent pas avec l'appareil.

86401310 Operators Manual - ADM8 115V 13

Operations

Controls
8 9 4 5 6 1. Main Handle. Used to pull and maneuver
machine
2. Handle Adjustment. Used to adjust height of
handle
3. Electrical Cord.
4. Solution Switch. Turns on pump. Continuous
position (bottom) activates electro-valve to
dispense solution to floor through jets. Intermittent
position (up) requires operator to depress 1 of 3
trigger switches to dispense solution. Center
7 position is off.
5. Brush Motor Switch. Turns on brush motor
6. Vacuum Motor Switch. Turns on vacuum motor.
7. Trigger Switches. Activates electro-valve to
dispense solution to floor through jets when
solution switch is in the intermittent position.
8. Brush Motor Circuit Breaker. 6 amp. Breaker
protecting brush motor.
9. Vacuum Motor Circuit Breaker. 15 amp.
Breaker protecting vacuum motor.
1 10. Recovery Dump Hose. Facilitates draining dirty
cleaning solution.
11. Solution Dump Hose. Facilitates draining excess
3 cleaning solution from solution tank.

10 2

11

14 86401310 Operators Manual - ADM8 115V

Operations

Components
11
1. Solution Accessory Tool Hookup.
Used for various auxiliary cleaning
tools.
2. Vacuum Hose Door. Used to connect
various auxiliary 1 ½ inch cleaning tool
vacuum hoses.
1 3. Brush Height Adjustment. Used to
regulate brush height from storage
position to various carpet heights.
4. Recovery Tank. Used to collect dirty
10 cleaning solution.
3
9 5. Solution Tank. Used to hold cleaning
2 solution.
6. Recovery Tank Dome.
7. Vacuum Shoe.
8. Brush Housing.
6 9. Front Lifting Handle.
10. Cleaning Solution Filter.
11. Solution Tank Fill Hose.
4

15
86401310 Operators Manual - ADM8 115V
Operations

Components
1. Solution Intake Cover.
2. Vacuum Intake Cover.
3. Float Shut-Off
4. Clean-Out Opening.
5. Pour Spout.
6. Lift Handle

16 86401310 Operators Manual - ADM8 115V

 Operations

FILL LINE

Filling the Admiral

NOTE: Use clean bucket of water to fill solution tank.

Do not put defoamer, solvents, spotter or prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet. Dry spillage from top of solution tank before replacing
recovery tank.

Suitable Chemicals Non-Compatible Chemicals

Alkalis Aldehydes
Detergents Aromatic Hydrocarbons
Hydroxides SP Butyls
Soaps Carbon Tetrachloride
Vinegar Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene

* Product Trademark Names

86401310 Operators Manual - ADM8 115V 17

Operations

Filling the Admiral - continued

1. Remove electrical cord and literature from recovery
tank.

2. Remove the recovery tank from the machine.

3. Fill the Solution Tank with 8 gallons (30.3 ltr.) of

water, that is no more than 140°F/60°C.

4. Add 8-16 oz. (237ml-473ml) of cleaning chemical.

18 86401310 Operators Manual - ADM8 115V

 Operations

5. Replace the Recovery Tank on the machine.

Machine Operation
1. Plug cord into grounded outlet.
NOTE: Be sure dome is seated on recovery tank, and
float shut-off is installed correctly.

2. Adjust brush to proper setting.

NOTE: For good operation the brush must skim the
carpet. If circuit breaker trips raise brush to prevent
damage to motor or carpet.

3. Turn on brush and vacuum motor switches

("ON"="I"). Turn on solution switch for continuous
spray or set switch to intermittent to allow use of
trigger switches.

86401310 Operators Manual - ADM8 115V 19

Operations

4. Adjust handle to comfortable operating position.

Tip machine back by main handle to move to
starting point.

5. Lower machine to floor.

6. Select continuous setting to start solution spray or

select intermittent setting to enable use of trigger
switches to start solution spray.
The intermittent setting requires the operator to
hold any one of the three trigger switches in the
"on" position with the fingers, and is typically used
in small areas where short cleaning passes are
made.
The continuous setting allows the operator to set
the switch in the "on" position with one touch, and
is typically used in large areas where long cleaning
passes are made.

Cleaning Procedure
1. Start at wall closest to power outlet. Pull straight
back without pushing down on handle.

20 86401310 Operators Manual - ADM8 115V

 Operations

2. Release intermittent trigger switches or turn off

continuous setting on solution switch
approximately 1 foot before ending cleaning pass.

1ft.
(30cm)

3. Push down on handle to raise vacuum shoe and

brush before moving to the next cleaning pass.
Overlap brush contact area approximately 1 inch.

4. During operation, observe the following: The

Admiral is equipped with clear internal covers to
facilitate operator viewing of dirty solution and
vacuum air flow.
During operation, observe the vacuum intake
cover. Large amounts of water or foam entering the
vacuum system can damage the vacuum motor.
If you notice either condition, shut down the
machine immediately. Empty recovery tank and/or
add defoamer to recovery tank.

5. Use right side of machine for cleaning against

walls.

86401310 Operators Manual - ADM8 115V 21

Operations

6. After cleaning, turn off all controls, return brush to

storage position and carefully unplug machine.

7. To speed drying, use an air moving fan.

8. Empty recovery tank by releasing dump hose. Use

a hose with cold water to clean out the recovery
tank. Drain solution tank after each use.

RECOVERY
DRAIN
SOLUTION
DRAIN

22 86401310 Operators Manual - ADM8 115V

 Operations

Accessory Tool Usage

Use only one of the following acceptable accessory
tools.
8.600-061.0 - STANDARD WAND
8.600-060.0 - DELUXE PROFESSIONAL WAND
8.603-154.0 - HOSE ASM, CST HANDTOOL

1. Pull back collar and insert over machine mounted

fitting, then release collar to lock into place.

2. Lift door on front of vacuum shoe and insert 1 1 /2

inch hose cuff into hole.

3. Turn on vacuum motor switch and set solution

switch to intermittent position.
NOTE: Be sure brush switch is in off position and
brush is in storage position.

4. Squeeze handle on accessory tool to begin

cleaning.

86401310 Operators Manual - ADM8 115V 23

Maintenance

Service Schedule
MAINTENANCE DAILY WEEKLY QUARTERLY
Check machine for cord damage *
Check recovery dome and gasket for
*
damage and cleanliness
Check brush - should be clean with no lint
*
or strings attached
Inspect vac shoe for blockage; remove
*
fibers with coat hanger, etc.
Check hoses for wear, blockages, or
*
damage
Check handles, switches, and knobs for
*
damage
Check vac motor intake filter and clean *
Run one gallon of water through system *
Clean out recovery tank and check float
*
valve to make sure it moves freely
Clean out solution tank and remove and
*
clean vacuum intake screen
Clean outside of all tanks and check for
*
damage
Run vac motor for at least one minute to
*
allow motor to dry
Store with dome off tank to allow the tank
*
to dry
Check all bearings for noise *
Check all gaskets for wear and leakage *
Check vacuum intake screen for damage;
*
replace if necessary
Check pump pressure; observe spray
pattern and check with gauge if *
necessary
Check and clean solution screen *
Check belts for wear and replace as
*
necessary
Check brush for wear; ensure bristles are
*
not damaged
Check cables for fraying *
Check the spray bar (manifold) for
*
damage; replace if broken or bent
Check condition of vac shoe and frame
*
for damage
Check overall performance of machine *
Check vac motor carbon brushes *

24 86401310 Operators Manual - ADM8 115V

 Maintenance

Periodic Maintenance 8. Check cooling air screen (located on frame behind

left wheel) for lint or debris.
Twice a month, flush a white vinegar solution (One
quart vinegar to two gallons of water) or anti-browning 9. Check float and shut-off screen and clean as
solution (mixed as directed) through the extractor. This necessary.
will prevent build-up of alkaline residue in the system. If NOTE: Always store machine with brush in "Store"
spray jets become clogged, remove the spray tips, position.
wash them thoroughly, and blow-dry.
NOTE: Do not use pins, wire, etc. to clean nozzles as
this could destroy spray pattern.

Periodically inspect all hoses, electrical cables and

connections on your machine. Frayed or cracked hoses
should be repaired or replaced to eliminate vacuum or
solution pressure loss. If the cable insulation is broken
or frayed, repair or replace it immediately. Don't take
chances with electrical fire or shock.

Daily / Regular Maintenance

Before making any adjustments or repairs to the
machine, disconnect the power cord from electrical
source.
1. Empty unused cleaning solution from the solution
tank.
2. Inspect and clean filter screen in solution tank.
3. Flush pumping system with 4 or 7 liters of clean,
hot water.
4. After each use, rinse tank with fresh water. Periodi-
cally inspect the recovery tank and decontaminate
if necessary, using a Hospital Grade Virucide or a
1-10 bleach to water solution. Waste water should
be disposed of properly.
5. Check for and remove any lint or debris around vac
shoe.
6. Check spray jets for full spray pattern.
7. Remove lint and dirt build-up from brush and
housing.
NOTE: Brush removal:

a. To remove brush, grab and pull brush out from

end opposite drive belt (operator's right). Remove
other end from brush driver.
b. To install brush, line up slots in brush core with
pin in driver on drive belt side (operator's left) and
push brush onto driver. Then snap bearing end
(opposite end) of brush into retaining clip.

86401310 Operators Manual - ADM8 115V 25

Maintenance

Vacuum Motor Replacement

WARNING: The green ground wire must be attached for
safe operation. See wiring diagram.
AVERTISSEMENT: Le fil à la terre vert doit être attaché
pour un fonctionnement en toute sécurité. voir le schéma
de câblage.
Only qualified maintenance personnel are to
End Cap
perform the following repairs.

Carbon
Brushes

Seul le personnel d'entretien qualifié peut effectuer

des réparations.
1. Turn off all switches and unplug machine.
2. Remove recovery tank.
If armature commutator is grooved, extremely pitted or not
3. Remove the (2) screws that fasten the solution concentric, the motor will need to be replaced or sent to a
tank to the frame, and tilt tank back to expose the qualified service center.
inside of the frame.
4. Locate the vacuum motor wires and disconnect at
the connector. Close the solution tank.
5. Remove the (6) screws holding the vacuum motor Important:
These brushes wear quicker as the length shortens due to
cover to the solution tank. increased heat. Spring inside brush housing will damage
motor if brushes are allowed to wear away completely.
6. Remove the vacuum motor.
7. Reverse process to install vacuum motor.
3
8 [9.5 mm]
Periodically check the length of the carbon brushes. Replace
both carbon brushes when either is less than 3/8" (9.5mm)
long.

26 86401310 Operators Manual - ADM8 115V

 Maintenance

Belt Replacement

Only qualified maintenance personnel are to

perform the following repairs.
SIDE PLATE

Seul le personnel d'entretien qualifié peut effectuer

des réparations.
1. Turn off all switches and unplug machine.
2. Remove recovery tank and brush.
3. Remove the (2) screws that fasten the solution
tank to the frame, and tilt tank back to expose the
inside of the frame.
VACUUM SHOE LINKS
4. Loosen the (4) screws that hold the brush motor in
place and slide motor forward to release tension in
belt.
5. Remove the (2) screws that fasten the vacuum
shoe links to the brush housing.
6. Remove the (3) screws that fasten the side plate to
the brush housing to remove belt.
NOTE: All components associated with driving the
brush will come out with the side plate.

7. Reverse process to install belt.

86401310 Operators Manual - ADM8 115V 27

Maintenance

Solution Pump Replacement

Only qualified maintenance personnel are to

perform the following repairs.

Seul le personnel d'entretien qualifié peut effectuer

des réparations
1. Turn off all switches and unplug the machine.
2. Remove recovery tank.
3. Remove the (2) screws that fasten the solution
tank to the frame, and tilt tank back to expose the
inside of the frame.
4. Remove solution hoses from fittings in pump.
5. Remove the (2) screws that fasten the pump to the
frame.
6. Reverse process to install pump

86161980 PUMP REPLACEMENT KITS SHURFLO 100 PSI 86026390

Switch Asm

Pump Head Replacement Bypass Valve Asm Diaphragm

8251040 86258830 86235100

28 86401310 Operators Manual - ADM8 115V

 Maintenance

Troubleshooting Chart
PROBLEM CAUSE SOLUTION
No Power, Nothing Runs Is the cord plugged in. Plug in cord.
Circuit breaker tripped in building. Reset breaker.
Faulty switch. Call for service.
Faulty power cord or pigtail. Call for service.
Vacuum Motor Will Not
Vacuum circuit breaker tripped. Reset breaker.
Run
Faulty main vacuum switch. Call for service.
Loose wiring. Call for service.
Faulty vac motor. Call for service.
See "Brush Replacement" in maintenance
Carbon brushes worn.
section.
Vacuum Motor Runs But Debris lodged in vac shoe. Remove debris from vac shoe.
Suction Is Poor Dome gasket defective or missing. Replace as necessary.
Vacuum hose cracked or hose cuff
Replace or repair as necessary.
loose.
Recovery tank full / float ball stuck in Turn off vac motor. Drain and rinse
the up position. recovery tank.
Main pump switch off. Turn on.
Poor Or No Water Clean using a vinegar /water solution or
Jets clogged or missing.
Flow(Carpet Is Streaky) replace.
Drain solution tank and clean solution
Solution filter clogged.
filter.
Faulty solenoid. Call for service.
Brush Does Not Spin Brush switch off. Turn on brush switch.
Brush circuit breaker tripped. Reset circuit breaker.
Brush belt broken. Replace as necessary.
Faulty brush motor. Call for service.

86401310 Operators Manual - ADM8 115V 29

Suggested Spare Parts

PART NO. DESCRIPTION SERIAL # NOTES

86001140 BRUSH, ASM, 15 IN Brush Assembly
86001100 BELT, 180J6 MICRO-V Brush Assembly
86004570 JET BODY, MINI PROMAX BODY Pump
86004580 JET, MINI PROMAX 9504 Pump
86003630 FLOAT, SHUT-OFF Recovery Tank
86003330 DOME ASM, CLP FAM Recovery Tank
86007970 STRAINER, 3/8 IN. NPT 60 MESH Solution Tank
86135320 BRUSH SET, 120V VAC, WINDSOR Solution Tank

30 86401310 Operators Manual - ADM8 115V

 Notes

86401310 Operators Manual - ADM8 115V 31

 THANK YOU! !
MERCI! DANKE! GRACIAS!

Registrieren Sie Ihr Produkt und profitieren Sie von vielen Vorteilen.

Register your product and benefit from many advantages.

Enregistrez votre produit et bénéficier de nombreux avantages.

Registre su producto y aproveche de muchas ventajas.

www.kaercher.com/welcome

Bewerten Sie Ihr Produkt und sagen Sie uns ihre Meinung.

Rate your product and tell us your opinion.

Évaluer votre produit et dites-nous votre opinion.

Reseñe su producto y díganos su opinión

www.kaercher.com/dealersearch

Alfred Kärcher SE & Co. KG

Alfred-Kärcher-Str. 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212