Sabic Fortify C5070D TDS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

SABIC® FORTIFY™ C5070D

POLYOLEFIN ELASTOMER

DESCRIPTION
SABIC® FORTIFY™ C5070D is an ethylene octene copolymer produced by solution polymerization using metallocene
catalyst. This product is available as free flowing pellets.
SABIC® FORTIFY™ C5070D is designed as a low density and high performance copolymer modifier to provide superior
impact properties and flow characteristics.

TYPICAL APPLICATIONS
Impact modifier in thermoplastic olefin compounds, footwear midsoles and wire and cable extrusion.

TYPICAL PROPERTY VALUES Revision 20171215

PROPERTIES TYPICAL VALUES UNITS TEST METHODS

POLYMER PROPERTIES
Density 868 kg/m³ ASTM D792
Melt Flow Rate
at 190°C and 2.16 kg 5.0 g/10 min ASTM D1238
at 230°C and 2.16 kg 11.0 g/10 min ASTM D1238
Mooney viscosity (ML 1+4, 121 °C) 8 MU ASTM D1646

MECHANICAL PROPERTIES (1)


Durometer Hardness
shore A (1 second) 63 - ASTM D2240
shore D (1 second) 16 - ASTM D2240
Tensile Properties
strength at break 6 MPa ASTM D638
elongation 1100 % ASTM D638
100% modulus 2.3 MPa ASTM D638
Flexural Modulus (1% Secant) 10.8 MPa ASTM D790 A
Tear Strength (Type C) 35.3 kN/m ASTM D624
THERMAL PROPERTIES
Peak Melting Temperature 62 °C SABIC method
Glass Transition Temperature, Tg -52 °C SABIC method

(1)
All physical properties were measured from specimens cut from compression molded. These typical values depend onmanufacturing conditions.
Therefore, customers should confirm the product performance by using their own tests.

© 2017 Copyright by SABIC. All rights reserved


HEALTH, SAFETY AND FOOD CONTACT REGULATIONS
SABIC® FORTIFY™ C5070D is an ethylene octene copolymer produced by solution polymerization using metallocene
catalyst. This product is available as free flowing pellets. SABIC® FORTIFY™ C5070D is designed as a low density and high
performance copolymer modifier to provide superior impact properties and flow characteristics.
This product is not intended for and must not be used in any pharmaceutical/medical applications.

STORAGE AND HANDLING


POE Polyolefin Elastomer resins (in pelletized form) should be stored in such a way that it prevents exposure to direct sunlight
and/or heat, as this may lead to quality deterioration. The storage location should also be dry, dust free and the ambient
temperature should not exceed 30°C. Further avoid temperatures above 50°C and below 10°C. Please mind the temperature
conditions when using the low density grades <0.875 g/cm3, especially when the shipment or storage temperature would
approach the softening and melting temperature of the POE resin. Outer package wrap should not be removed from the
pallets until the products are ready to be used. Stacking of pallets is not recommended due to dimensional instability and
material blocking risk. Grades with D suffix are being treated with anti-caking dust agent to reduce blocking behaviour.It is
advisable to process Polyolefin Elastomers resins within 6 months after delivery, this because also excessive aging can lead
to a deterioration in quality.

DISCLAIMER
Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale
(available upon request) unless agreed otherwise in writing and signed on behalf of the seller. While the information contained herein
is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND
NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT
TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY
APPLICATION. Each customer must determine the suitability of seller materials for the customer’s particular use through appropriate
testing and analysis. No statement by seller concerning a possible use of any product, service or design is intended, or should be
construed, to grant any license under any patent or other intellectual property right.

© 2017 Copyright by SABIC. All rights reserved

You might also like