Scribd
Upload
23 views2 pages

MarchApril 2023

Uploaded by

maamamun4000
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views2 pages

MarchApril 2023

Uploaded by

maamamun4000
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Code No: 151AD

R18
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
B.Tech I Year I Semester Examinations, March/April - 2023
JN
ENGINEERING GRAPHICS
(Common to CE, ME, EIE, MCT, MMT, AE, MIE, PTM, CSE(AI&ML), CSE(IOT))
Time: 3 hours Max. Marks: 75
Answer any five questions
TU
All questions carry equal marks
---

1. Draw an epicycloid having a generating circle of diameter 50 mm and directing curve of


H
radius 100 mm. Draw a tangent and a normal at any point on the curve. [15]
OR
2. Construct a diagonal scale of R.F 3:90 to show meters, decimeters and centimeters and to
U
measure upto 4 m. show a distance of 2m, 3 dm and 5 cm on the scale. [15]
se
3. A 100 mm long line EF has 70 mm length in the top view and 84 mm length in the front
view. If the line end E is 20 mm above HP and F is 15 mm in front of VP, find the true
length of the line EF and draw the projections. [15]
OR
d
4. A hexagonal lamina of 30 mm side stands with one of its edges parallel to and 20 mm in
front of VP, such that the surface is inclined at 450 to VP. If the edge parallel to VP is
pa
inclined at 500 to HP, draw the projections of the lamina. [15]

5. A cone of base 50 mm diameter and axis 60 mm long has one of its generators on HP. If
the axis is parallel to VP, draw its projections. [15]
pe
OR
6. A square pyramid of side 50 mm and height 70 mm is kept on HP so that the sides are
equally inclined to VP. A cutting plane perpendicular to VP but inclined at 600 to HP cuts
rs
and removes the apex portion so that the plane passes through the midpoint of the axis in
the front view. Draw the front view, sectional top view and the true shape of the section.
[15]
20
7. A right regular pentagonal pyramid, side of base 36 mm and height 64 mm, rests on its
base upon the ground with one of its base side parallel to VP. A sectional plane
perpendicular to VP and inclined at 300 to HP cuts the pyramid, bisecting its axis. Draw
23
the development of the truncated pyramid. [15]
OR
8. A vertical cylinder of 72 mm diameter and 100 mm length is penetrated by another
cylinder, 48 mm diameter and 120 mm long. The axis of the penetrating cylinder is
inclined at 250 to HP and parallel to VP. Draw the projections showing the line of
intersection, if the two axes of the cylinders intersect at their mid points. [15]

9. A cone of diameter 32 mm base and 40 mm height is surmounted over a square slab of


40 mm side and base 25 mm thickness on HP so that one edge of the square is parallel to
VP. Draw the isometric view of the combination. [15]
OR
10. Draw the front, top and side view of the following machine part. [15]
JN
TU
H
U
se
d
pa
pe
--ooOoo--
rs
20
23

You might also like