J2.2-3.5XN (A276) Tech Details

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

4-WHEEL ELECTRIC

FORKLIFT TRUCKS
J2.2-3.5XN

2 200-3 500 KG
J2.2XN, J2.5XN, J3.0XN, J3.5XN ADVANCE

1.1 Manufacturer (abbreviation) HYSTER HYSTER HYSTER


1.2 Manufacturer’s type designition J2.2XN J2.5XN-717 J2.5XN-861
DISTINGUISHING MARKS

Model Advance Advance Advance


1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Electric (battery) Electric (battery) Electric (battery)
1.4 Operator type: hand, pedestrian, standing, seated, order-picker Seated Seated Seated
1.5 Rated capacity / Rated load Q (kg) 2200 2500 2500
1.6 Load centre distance c (mm) 500 500 500
1.8 Load distance, centre of drive axle to fork x (mm) 419 419 419
1.9 Wheelbase y (mm) 1606 1606 1750

2.1 Service weight r kg 4520 4520 4930


WEIGHTS

2.2 Axle loading, laden front/rear r kg 5739 977 6211 805 6283 1144
2.3 Axle loading, unladen front/rear r kg 2279 2236 2279 2236 2469 2458

3.1 Tyres: L = pneumatic, V = cushion, SE = Pneumatic Shape Solid SE SE SE


TYRES / CHASSIS

3.2 Tyre size, front 23 x 10 - 12 23 x 10 - 12 23 x 10 - 12


3.3 Tyre size, rear 18 x 7 - 8 18 x 7 - 8 18 x 7 - 8
3.5 Wheels, number front/rear (x = driven wheels) 2X 2 2X 2 2X 2
3.6 Tread, front * b10 (mm) 938 1054 938 1054 938 1054
3.7 Tread, rear b11 (mm) 992 992 992

4.1 Tilt of mast/fork carriage forward/backward a / b (°) 5 5 5 5 5 5


4.2 Height, mast lowered h1 (mm) 2192 2192 2192
4.3 Free lift ¶ h2 (mm) 100 100 100
4.4 Lift ¶ h3 (mm) 3350 3350 3350
4.5 Height, mast extended ª h4 (mm) 3960 3960 3960
4.7 Height of overhead guard (cabin) n h6 (mm) 2193 2193 2193
4.7.1 Cab height (open cab) 2206 2206 2206
4.8 Seat height relating to SIP/stand height £ h7 (mm) 1070 1070 1070
4.12 Coupling height h10 (mm) 262 262 262
4.19 Overall length l1 (mm) 3336 3336 3480
4.20 Length to face of forks ± l2 (mm) 2336 2336 2480
4.21 Overall width * b1/b2 (mm) 1173 1289 1173 1289 1173 1289
DIMENSIONS

4.22 Fork dimensions DIN ISO 2331 s/e/l (mm) 40 100 1000 40 100 1000 40 100 1000
4.23 Fork carriage ISO 2328, class/type A, B 2A 2A 2A
4.24 Fork carriage width l b3 (mm) 1067 1067 1067
4.31 Ground clearance, laden, below mast m1 (mm) 83 83 83
4.32 Ground clearance, centre of wheelbase m2 (mm) 137 137 137
4.33 Load dimension b12 × l6 crossways b12 × l6 (mm) 1200 x 1000 1200 x 1000 1200 x 1000
4.34 Aisle width predetermined load dimensions Ast (mm) 3613 3613 3750
4.34.1 Aisle width for pallets 1000 × 1200 wide u Ast (mm) 3613 3613 3750
4.34.2 Aisle width for pallets 800 × 1200 long u Ast (mm) 3766 3766 3906
4.35 Turning radius Wa (mm) 1931 1931 2073
4.36 Internal turning radius b13 (mm) 173 173 189
4.41 90° intersecting aisle (With pallet W = 1200mm, L = 1000mm) (mm) 1981 1981 2043
4.42 Step Height (from ground to running board) « (mm) 706 / 810 706 / 810 706 / 810
4.43 Step Height (mm) 475 475 475

5.1 Travel speed, laden / unladen r km/h 18.0 18.0 18.0 18.0 18.0 18.0
5.2 Lift speed, laden / unladen m/sec 0.40 0.63 0.38 0.63 0.38 0.63
5.3 Lowering speed, laden / unladen m/sec 0.57 0.5 0.57 0.51 0.57 0.51
PERFORMANCE DATA

5.5 Drawbar pull, laden / unladen, 60 minute rating ** N 5468 5773 5591 5726 5591 5726
5.6 Maximum drawbar pull laden / unladen, 5 minute rating*** N 18045 19052 18451 18897 18451 18897
5.7 Gradeability laden / unladen, 30 minute rating **** † % 10 14 9 13 9 13
5.8 Maximum gradeability laden / unladen *** † % 26 39 24 35 24 35
5.9 Acceleration time, laden / unladen 10m r sec 4.42 4.11 4.45 4.11 4.45 4.11
5.10 Service brake Hydraulic Hydraulic Hydraulic

6.1 Drive motor rating S2 60 min kW 2 x 10.0 2 x 10.0 2 x 10.0


ELECTRIC ENGINE

6.2 Lift motor rating at S3 15% kW 16.0 16.0 16.0


6.3 Battery according to DIN 43531/35/36 A, B, C, no 43536A 43536A 43536A
6.4 Battery voltage/nominal capacity K5 V/Ah 80 560 80 560 80 700
6.5 Battery weight (min/max) kg 1480 1635 1480 1635 1770 1956
6.6 Energy consumption according to VDI cycle À kWh/h @Nr of Cycles 6.68 7.00 7.89

8.1 Drive control AC electronic AC electronic AC electronic


ADDITIONAL DATA

10.1 Operating pressure for attachments bar 155 155 155


10.2 Oil volume for attachments G l/min 20-40 20-40 20-40
10.3 Hydraulic oil tank, capacity ℓ 29.3 29.3 29.3
10.7 Sound pressure level at the driver’s seat J dB(A) 67 67 67
10.8 Towing coupling, type DIN Pin Pin Pin

Specification data is based on VDI 2198 * Standard / Wide tread ** 60 minute rating *** 5 minute rating **** 30 minute rating

2
HYSTER
HYSTER 1.1 NOTE:
J3.0XN J3.5XN 1.2 Specifications are affected by the condition of

DISTINGUISHING MARKS
Advance Advance the vehicle and how it is equipped, as well as the
nature and condition of the operating area. If these
Electric (battery) Electric (battery) 1.3
specifications are critical, the proposed application
Seated Seated 1.4
should be discussed with your dealer.
3000 3500 1.5
r Max. battery
500 500 1.6
¶ Bottom of forks
431 431 1.8
1750 1750 1.9 ª Without load backrest
£ Full suspension in compressed position
specified. Add 40 mm for nominal position.
5000 5320 2.1

WEIGHTS
Add 104 mm for battery side removal option
7157 841 7871 942 2.2
l Add 28 mm with load backrest
2560 2438 2508 2805 2.3
n h6 subject to +/- 5 mm tolerance.
Add 20mm with cab option.
SE SE 3.1 TYRES / CHASSIS Add 104mm for battery side removal option.
23 x 10 - 12 23 x 10 - 12 3.2 Add 124mm for battery side removal with
18 x 7 - 8 18 x 7 - 8 3.3 cab option
2X 2 2X 2 3.5 « Vertical/horizontal battery removal
938 1054 938 1054 3.6
± With sideshift carriage add 32mm for
992 992 3.7
J2.2XN - J2.5XN-717, 34mm for
J2.5XN-861 LWB, 33mm for J3.0XN,
5 5 5 5 4.1 32mm for J3.5XN
2192 2192 4.2 u Stacking aisle width (lines 4.34.1 & 4.34.2)
100 100 4.3 is based on the VDI standard calculation as
3155 3155 4.4 shown on illustration. The British Industrial Truck
3865 3865 4.5
Association recommends the addition of 100
mm to the total clearance (dimension a) for extra
2193 2193 4.7
operating margin at the rear of the truck.
2206 2206 4.7.1
† Gradeability figures (lines 5.7 & 5.8)
1070 1070 4.8
are provided for comparison of tractive
262 262 4.12 performance, but are not intended to endorse
3492 3570 4.19 the operation of the vehicle on the stated
2492 2570 4.20 inclines. Follow instructions in the operating
1173 1289 1173 1289 4.21 manual regarding operation on inclines.
DIMENSIONS

50 120 1000 50 120 1000 4.22 r HiP Performance settings


3A 3A 4.23 À eLo Performance settings
1067 1067 4.24
G Maximum flow set through dash display.
83 83 4.31
J LPAZ, measured according to the test cycles
137 137 4.32
and based on the weighting values contained
1200 x 1000 1200 x 1000 4.33 in EN12053
3762 3828 4.34
3762 3828 4.34.1
TABLES KEY:
3918 3984 4.34.2 < Add 666mm with load backrest extension.
2073 2139 4.35 m Deduct 666mm with load backrest extension.
189 189 4.36 ¨ Add 684mm with load backrest extension
2043 2076 4.41 Ò Deduct 684mm with load backrest extension.
706 / 810 706 / 810 4.42
w Add 583mm with load backrest extension.
475 475 4.43
æ Deduct 583mm with load backrest extension.

17.0 18.0 16.0 18.0 5.1


« Add 601mm with load backrest extension.
0.33 0.59 0.31 0.59 5.2 Þ Deduct 601mm with load backrest extension.
0.56 0.46 0.58 0.46 5.3 r Nominal Battery compartment length.
PERFORMANCE DATA

5441 5588 5478 5720 5.5 ¬ Wide tread required. Standard tread possible
17956 18441 18076 18875 5.6 but with reduced capacity. Contact your lift
8 12 7 12 5.7 truck dealer
22 34 20 32 5.8 ( Alternative capacities available with pneumatic
4.56 4.18 4.60 4.23 5.9 tyres. Contact your lift truck dealer.
Hydraulic Hydraulic 5.10 v Max fork height = h3+s
± Freelift (top of forks) = h2+s
2 x 10.0 2 x 10.0 6.1
ELECTRIC ENGINE

16.0 16.0 6.2 NOTICE


43536A 43536A 6.3 Care must be exercised when handling
80 700 80 700 6.4 elevated loads. When the carriage and/or load
EQUIPMENT & WEIGHT:
1770 1956 1770 1956 6.5 is elevated, truck stability is reduced. It is
Weights (line 2.1) are based on the
8.66 10.03 6.6 following specifications: important that mast tilt in either direction be
Complete truck with 3 390 mm (J2.5- kept to a minimum when loads are elevated
AC electronic AC electronic 8.1 2.5XN) or 3 200 mm (J3.0-3.5XN) 2-stage Operators must be trained and adhere to the
limited free lift mast, standard carriage
ADDITIONAL DATA

155 155 10.1 instructions contained in the Operating Manual.


and 1000 mm forks with load backrest
20-40 20-40 10.2 Hyster products are subject to change without notice.
with extended shift on with DIN battery
29.3 29.3 10.3 Lift trucks illustrated may feature optional equipment.
configuration, standard seat and overhead
67 67 10.7 guard and pneumatic shaped solid drive
Pin Pin 10.8 and steer tyres.
Safety:
This truck conforms to the current EU requirements.

3
J2.2XN, J2.5XN, J3.0XN, J3.5XN ADVANCE+

1.1 Manufacturer (abbreviation) HYSTER HYSTER HYSTER


1.2 Manufacturer’s type designition J2.2XN J2.5XN-717 J2.5XN-861
DISTINGUISHING MARKS

Model Advance+ Advance+ Advance+


1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas Electric (battery) Electric (battery) Electric (battery)
1.4 Operator type: hand, pedestrian, standing, seated, order-picker Seated Seated Seated
1.5 Rated capacity / Rated load Q (kg) 2200 2500 2500
1.6 Load centre distance c (mm) 500 500 500
1.8 Load distance, centre of drive axle to fork x (mm) 419 419 419
1.9 Wheelbase y (mm) 1606 1606 1750

2.1 Service weight r kg 4670 4870 4860


WEIGHTS

2.2 Axle loading, laden front/rear r kg 5640 1224 6114 1254 6183 1167
2.3 Axle loading, unladen front/rear r kg 2018 2646 1805 3063 2067 2783

3.1 Tyres: L = pneumatic, V = cushion, SE = Pneumatic Shape Solid SE SE SE


TYRES / CHASSIS

3.2 Tyre size, front 23 x 10 - 12 23 x 10 - 12 23 x 10 - 12


3.3 Tyre size, rear 18 x 7 - 8 18 x 7 - 8 18 x 7 - 8
3.5 Wheels, number front/rear (x = driven wheels) 2X 2 2X 2 2X 2
3.6 Tread, front * b10 (mm) 938 1054 938 1054 938 1054
3.7 Tread, rear b11 (mm) 992 992 992

4.1 Tilt of mast/fork carriage forward/backward a / b (°) 5 5 5 5 5 5


4.2 Height, mast lowered h1 (mm) 2192 2192 2192
4.3 Free lift ¶ h2 (mm) 100 100 100
4.4 Lift ¶ h3 (mm) 3350 3350 3350
4.5 Height, mast extended ª h4 (mm) 3960 3960 3960
4.7 Height of overhead guard (cabin) n h6 (mm) 2193 2193 2193
4.7.1 Cab height (open cab) 2206 2206 2206
4.8 Seat height relating to SIP/stand height £ h7 (mm) 1070 1070 1070
4.12 Coupling height h10 (mm) 262 262 262
4.19 Overall length l1 (mm) 3336 3336 3480
4.20 Length to face of forks ± l2 (mm) 2336 2336 2480
4.21 Overall width * b1/b2 (mm) 1173 1289 1173 1289 1173 1289
DIMENSIONS

4.22 Fork dimensions DIN ISO 2331 s/e/l (mm) 40 100 1000 40 100 1000 40 100 1000
4.23 Fork carriage ISO 2328, class/type A, B 2A 2A 2A
4.24 Fork carriage width l b3 (mm) 1067 1067 1067
4.31 Ground clearance, laden, below mast m1 (mm) 83 83 83
4.32 Ground clearance, centre of wheelbase m2 (mm) 137 137 137
4.33 Load dimension b12 × l6 crossways b12 × l6 (mm) 1200 x 1000 1200 x 1000 1200 x 1000
4.34 Aisle width predetermined load dimensions Ast (mm) 3613 3613 3750
4.34.1 Aisle width for pallets 1000 × 1200 wide u Ast (mm) 3613 3613 3750
4.34.2 Aisle width for pallets 800 × 1200 long u Ast (mm) 3766 3766 3906
4.35 Turning radius Wa (mm) 1931 1931 2073
4.36 Internal turning radius b13 (mm) 173 173 189
4.41 90° intersecting aisle (With pallet W = 1200mm, L = 1000mm) (mm) 1981 1981 2043
4.42 Step Height (from ground to running board) « (mm) 706 / 810 706 / 810 706 / 810
4.43 Step Height (mm) 475 475 475

5.1 Travel speed, laden / unladen r km/h 21.0 21.0 21.0 21.0 21.0 21.0
5.2 Lift speed, laden / unladen m/sec 0.52 0.72 0.49 0.72 0.49 0.72
5.3 Lowering speed, laden / unladen m/sec 0.57 0.51 0.57 0.51 0.57 0.51
PERFORMANCE DATA

5.5 Drawbar pull, laden / unladen, 60 minute rating ** N 6015 6235 6037 6185 6037 6185
5.6 Maximum drawbar pull laden / unladen, 5 minute rating*** N 19849 20576 19927 20409 19927 20409
5.7 Gradeability laden / unladen, 30 minute rating **** † % 11 16 10 14 10 14
5.8 Maximum gradeability laden / unladen *** † % 28 42 26 38 26 38
5.9 Acceleration time, laden / unladen 10m r sec 4.04 3.71 4.04 3.71 4.04 3.71
5.10 Service brake Hydraulic Hydraulic Hydraulic

6.1 Drive motor rating S2 60 min kW 2 x 10.0 2 x 10.0 2 x 10.0


ELECTRIC ENGINE

6.2 Lift motor rating at S3 15% kW 24.0 24.0 24.0


6.3 Battery according to DIN 43531/35/36 A, B, C, no 43536A 43536A 43536A
6.4 Battery voltage/nominal capacity K5 V/Ah 80 560 80 560 80 700
6.5 Battery weight (min/max) kg 1480 1635 1480 1635 1770 1956
6.6 Energy consumption according to VDI cycle r kWh/h @Nr of Cycles 7.51 7.87 8.86

8.1 Drive control AC electronic AC electronic AC electronic


ADDITIONAL DATA

10.1 Operating pressure for attachments bar 155 155 155


10.2 Oil volume for attachments G l/min 20-40 20-40 20-40
10.3 Hydraulic oil tank, capacity ℓ 29.3 29.3 29.3
10.7 Sound pressure level at the driver’s seat J dB(A) 68 68 68
10.8 Towing coupling, type DIN Pin Pin Pin

Specification data is based on VDI 2198 * Standard / Wide tread ** 60 minute rating *** 5 minute rating **** 30 minute rating

4
TRUCK DIMENSIONS
HYSTER
HYSTER 1.1
J3.0XN J3.5XN 1.2

DISTINGUISHING MARKS
Advance+ Advance+
Electric (battery) Electric (battery) 1.3
Seated Seated 1.4
3000 3500 1.5
500 500 1.6
431 431 1.8
1750 1750 1.9

5300 5370 2.1

WEIGHTS
7055 1244 7752 1115 2.2
2090 3209 2209 3158 2.3

SE SE 3.1 TYRES / CHASSIS


23 x 10 - 12 23 x 10 - 12 3.2
18 x 7 - 8 18 x 7 - 8 3.3
2X 2 2X 2 3.5
938 1054 938 1054 3.6
992 992 3.7

5 5 5 5 4.1
2192 2192 4.2
100 100 4.3
3155 3155 4.4
3865 3865 4.5
2193 2193 4.7
2206 2206 4.7.1
1070 1070 4.8
262 262 4.12
3492 3570 4.19
2492 2570 4.20
1173 1289 1173 1289 4.21
DIMENSIONS

50 120 1000 50 120 1000 4.22


3A 3A 4.23
1067 1067 4.24
= Centre of gravity of unladen truck a = Minimum operating clearance
83 83 4.31
137 137 4.32 Ast = Wa + R + a (see lines 4.34.1 & 4.34.2) (VDI standard = 200 mm
1200 x 1000 1200 x 1000 4.33 BITA recommendation = 300 mm)
3762 3828 4.34
R = (l6+ x) + b12 - b13
2 2
l6 = Load length
3762 3828 4.34.1
3918 3984 4.34.2
2
2073 2139 4.35
189 189 4.36
2043 2076 4.41
706 / 810 706 / 810 4.42 RATED CAPACITIES
475 475 4.43

19.5 21.0 18.0 21.0 5.1


Load centre
0.42 0.63 0.37 0.63 5.2
Distance from front forks to
0.56 0.46 0.58 0.46 5.3
PERFORMANCE DATA

centre of gravity of load.


5877 6035 5918 6177 5.5
Rated load
19393 19916 19522 20385 5.6 Based on 3-Stage full free
9 13 8 13 5.7 lift vertical masts up to
24 37 22 35 5.8 5100mm bottom of forks.
Rated load (kg)

4.14 3.78 4.19 3.83 5.9


Hydraulic Hydraulic 5.10

2 x 10.0 2 x 10.0 6.1


J3.5XN
ELECTRIC ENGINE

24.0 24.0 6.2


J3.0XN
43536A 43536A 6.3
J2.5XN
80 700 80 700 6.4 J2.2XN
1770 1956 1770 1956 6.5
8.66 10.03 6.6

Load centre (mm)


AC electronic AC electronic 8.1
ADDITIONAL DATA

155 155 10.1


20-40 20-40 10.2
29.3 29.3 10.3
EQUIPMENT & WEIGHT:
68 68 10.7 Weights (line 2.1) are based on the following specifications:
Pin Pin 10.8 Complete truck with 3 390 mm (J2.5-2.5XN) or 3 200 mm (J3.0-3.5XN) 2-stage limited free lift mast,
standard carriage and 1000 mm forks with load backrest with extended shift on with DIN battery
configuration, standard seat and overhead guard and pneumatic shaped solid drive and steer tyres.

5
MAST AND CAPACITY INFORMATION
Values shown are for standard equipment. When using non-standard equipment these values may change. Please contact your Hyster dealer for information.

VISTA MASTS J2.2-2.50XN


Maximum Fork Height v Back Tilt Overall Lowered Height Overall Extended Height Free lift (top of forks) ±
(mm) (h3 + s) (mm) (mm) (mm) (h2 + s)
3390 5° 2195 3956 < 140
Vista 3790 5° 2395 4356 < 140
2-Stage limited free lift 4330 5° 2745 4896 < 140
4830 5° 2995 5396 < 140

Vista
3400 5° 2195 3966 < 1625 m
2-Stage full free lift

4950 5° 2145 5496 ¨ 1595 Ò


Vista
5550 5° 2395 6096 ¨ 1845 Ò
3-Stage limited free lift
6000 5° 2595 6546 ¨ 2045 Ò

VISTA MASTS J3.0-3.5XN


Maximum Fork Height v Back Tilt Overall Lowered Height Overall Extended Height Free lift (top of forks) ±
(mm) (h3 + s) (mm) (mm) (mm) (h2 + s)
3200 5° 2195 3861 w 145
Vista 3600 5° 2395 4261 w 145
2-Stage limited free lift 4100 5° 2745 4761 w 145
4600 5° 2990 5261 w 145

Vista
2-Stage full free lift 3205 5° 2195 3862 w 1535 æ

4610 5° 2145 5252 « 1500 Þ


Vista 4910 5° 2295 5552 « 1650 Þ
3-Stage limited free lift 5210 5° 2395 5852 « 1750 Þ
5810 5° 2645 6452 « 2000 Þ

J2.2-3.5XN - capacity chart in kg @ 500 mm load centres


Pneumatic Shaped Solid Tyres
Maximum WITHOUT sideshift WITH integral sideshift Maximum WITHOUT sideshift WITH integral sideshift
fork height v fork height v
J2.2XN J2.5XN J2.5XN J2.2XN J2.5XN J2.5XN J3.0XN J3.5XN J3.0XN J3.5XN
(mm) (h3 + s) 717 r 717 r 861 r 717 r 717 r 861 r (mm) (h3 + s) 861 r 861 r 861 r 861 r
Vista 3390 2200 2500 2500 2200 2490 2500 3200 3000 3500 2960 3440
2-Stage 3790 2200 2500 2500 2200 2490 2500 3600 3000 3500 2950 3430
limited 4330 2200 2500 2500 2200 2470 2500 4100 3000 3500 2940 3420
free lift 4830 2200 2480 2500 2190 2440 2500 4600 2920 3410 2850 3330
Vista
2-Stage
3400 2200 2500 2500 2200 2500 2500 3205 3000 3500 2960 3440
full
free lift
Vista 4950 2200 2440 2500 2180 2400 2500 4610 2970 3460 2900 3370
3-Stage 5550 2110 2310 2410 2070 2250 2380 4910 2900 3400 2830 3300
full 6000 2020 2210 2310 1980 2150 2290 5210 2840 3320 ¬ 2760 3220 ¬
free lift 5810 2690 3170 ¬ 2600 3060 ¬

J2.2-3.5XN - capacity chart in kg @ 600 mm load centres


Pneumatic Shaped Solid Tyres
Maximum WITHOUT sideshift WITH integral sideshift Maximum WITHOUT sideshift WITH integral sideshift
fork height v fork height v
J2.2XN J2.5XN J2.5XN J2.2XN J2.5XN J2.5XN J3.0XN J3.5XN J3.0XN J3.5XN
(mm) (h3 + s) 717 r 717 r 861 r 717 r 717 r 861 r (mm) (h3 + s) 861 r 861 r 861 r 861 r
Vista 3390 2000 2270 2270 2000 2250 2270 3200 2720 3130 2680 3110
2-Stage 3790 2000 2270 2270 2000 2250 2270 3600 2720 3130 2670 3100
limited 4330 2000 2270 2270 1990 2240 2270 4100 2720 3130 2660 3090
free lift 4830 2000 2250 2270 1980 2210 2270 4600 2650 3090 2580 3010
Vista
2-Stage
3400 2000 2270 2270 2000 2260 2270 3205 2720 3130 2680 3110
full
free lift
Vista 4950 2000 2210 2270 1970 2170 2250 4610 2690 3130 2620 3050
3-Stage 5550 1920 2100 2190 1870 2030 2150 4910 2630 3080 2560 2980
full 6000 1830 2000 2100 1790 1940 2070 5210 2570 3010 ¬ 2500 2920 ¬
free lift 5810 2440 2870 ¬ 2350 2760 ¬

NOTE: To calculate truck capacities with alternative truck specifications to the ones shown in the above tables, please consult your Hyster dealer. The rated capacities shown are for masts in a vertical
position on trucks equipped with standard or sideshift carriage and nominal length forks. Masts above the maximum fork heights shown in the mast table are classified as high lift and, depending
on the tyre/tread configuration may require reduced capacity, restricted back tilt or wide tread.

6
PRODUCT FEATURES
The Hyster J2.2-3.5XN series is available in 2 configurations – Advance & Advance+.
With enhanced performance characteristics, the Advance+ configuration has been designed to operate in intensive, high
productivity applications with long runs and high lifts as an effective alternative to an engine-powered truck.
For example, in comparison to the Advance configuration, top speed (laden) has been increased to up to 21 km/h with faster
acceleration and lifting speeds have been increased by 27%.

DEPENDABILITY
n Redesigned mast incorporates new chain placement n The TouchPointTM mini-lever module armrest with
and hose routings that maximise fork visibility for the built in hydraulic controls, integrated directional
driver and reliable, high performance lifting. control, emergency off switch and horn offers the
n AC motor technology on traction and hoist, with built ultimate in comfort and control. Alternatively, seat-
in thermal management system, allows the truck to side manual levers also provide handling ease.
work reliably over long runs and in demanding work n A ‘Heads-up’ display keeps the driver’s field of vision
cycles, reducing downtime significantly. clear but provides him with ‘at a glance’ information
n The electrical system features a CANbus on truck operating conditions or performance settings.
communications network and Hall Effect sensors for n A choice of weather protection options promotes a
increased reliability. comfortable working environment, whatever
n IP54 enclosed traction motors and IP65 protection the conditions.
of controls and all electrical connections prevents
LOW COST OF OWNERSHIP
ingress of water and dust particles, reducing the
probability of truck downtime. n The Vehicle System Manager (VSM) allows
adjustment of truck performance parameters and
PRODUCTIVITY monitors key functions, leading to application
n Dual 10 kW AC front wheel traction motors deliver matched performance and minimum downtime.
smooth acceleration, fast travel and rapid direction n Durable, quality components, including virtually
changes. This is combined with regenerative braking maintenance free oil immersed brakes and brushless
and a powerful hoist motor to deliver efficient load AC motors offer long term reliability and lower
handling in the toughest of applications. maintenance costs.
n Designed to offer excellent manoeuvrability in n In-built thermal protection on traction motors and
working aisles, speeding up throughput, the truck advanced cooling system protect truck components,
features a slim counterweight, Zero Turn Radius leading to reduced maintenance costs.
(ZTR) steer axle and dual drive motors. n New horizontal battery extraction options fitted with
n The maintenance-free mechanical Hyster fork pockets and removable side panels providing
Stability Mechanism (HSM) reduces truck lean easy battery extraction. Hyster offers a battery change
when travelling over obstacles, increasing driver system to suit the infrastructure available at the
confidence and productivity. application site.
n Extended battery shift life with choice of battery
SERVICEABILILTY
configurations and new horizontal battery extraction
options fitted with fork pockets and removable side n Standard 1 000 hour service interval.
panels, manages energy efficiently. n Access to diagnostic information via dash display with
or plug-in port and laptop. This functionality saves
ERGONOMICS technician time when setting up multiple items.
n The ergonomically designed operator compartment n Easily removable two-piece floor plate provides
provides a comfortable and highly productive easy access to power contactor, traction controller
environment for the driver. fuses and relays.
n The fully adjustable tilt steering column with telescopic n Motor, pump, controller and oil tank are located in the
adjustment, memory tilt and synchronised steering counterweight and are easily accessible, requiring
options allows the operator to get on and off the only 2 thumb screws to be removed.
truck quickly and easily throughout the shift, ensuring
n LED master, indicator, brake and back-up lights
maximum comfort and increased productivity.
are designed to last the lifetime of the truck.

7
STRONG PARTNERS. TOUGH TRUCKS.
TM

FOR DEMANDING OPERATIONS, EVERYWHERE.

Hyster supplies a complete range of warehouse equipment,


IC and electric counterbalanced trucks, container handlers
and reach stackers. Hyster is committed to being much more
than a lift truck supplier.

Our aim is to offer a complete partnership capable of


responding to the full spectrum of material handling issues:
Whether you need professional consultancy on your fleet
management, fully qualified service support, or reliable parts
supply, you can depend on Hyster.

Our network of highly trained dealers provides expert,


responsive local support. They can offer cost-effective finance
packages and introduce effectively managed maintenance
programmes to ensure that you get the best possible value.
Our business is dealing with your material handling needs so
you can focus on the success of your business today and in
the future.

HYSTER EUROPE
Centennial House, Frimley Business Park, Frimley, Surrey, GU16 7SG, England.
Tel: +44 (0) 1276 538500

www.hyster.eu @ [email protected] f /HysterEurope @HysterEurope /HysterEurope

HYSTER-YALE UK LIMITED trading as Hyster Europe. Registered Address: Centennial House, Building 4.5, Frimley Business Park, Frimley, Surrey, GU16 7SG, United Kingdom.
Registered in England and Wales. Company Registration Number: 02636775.
HYSTER, and FORTENS are registered trademarks in the European Union and certain other jurisdictions.
MONOTROL® is a registered trademark, and DURAMATCH and are trademarks in the United States and in certain other jurisdictions.
Hyster products are subject to change without notice. Lift trucks illustrated may feature optional equipment.

Printed in The Netherlands. Part number: 3990057 Rev07-06/16-TLC

You might also like