Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
1 Design the following circuit using 2 input NAND Gates –
Y = (A.B + C)’
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
2 Design the following circuit using 2 input NOR Gates –
Y = (A.B + C)’
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
3 Design the following circuit using only NOT Gates and 2 input AND/OR Gates –
Y = (A + B).C + D
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard 1(5)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)
 Government College of Engineering & Textile Technology
Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
4 Design a 2:1 MUX using only 2 input NAND Gates
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
5 Design a 2:1 MUX using only 2 input NAND Gates
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
6 Design a 2:1 MUX using only 2 input NOR Gates
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)
 Government College of Engineering & Textile Technology
Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
7 Design a 1:2 DEMUX using only 2 input NAND Gates
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
8 Design a 1:2 DEMUX using only 2 input NOR Gates
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
9 Design a 4:2 Encoder using only 2 input NAND Gates
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)
 Government College of Engineering & Textile Technology
Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
10 Design a 4:2 Encoder using only 2 input NOR Gates
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
11 Design a Half Adder Circuit using only 2 input NOR Gates
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
12 Design a Full Adder Circuit using basic logic Gates
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)
 Government College of Engineering & Textile Technology
Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
13 Design and Implement the Circuit of a NAND based S-R Latch
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
14 Design and Implement the Circuit of a NOR based S-R Latch
- Draw the Circuit Diagram (8)
- Draw the Truth Table (5)
- Design the Circuit on Breadboard (15)
- Write Result and Discussion (2)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
15 Write a program in 8085 assembly language to store the data 44H in Reg D. Now
copy the content of Reg D in the memory location E300H, without involving Reg
A. Execute the program in 8085 Simulator Ultimate App and prepare the Lab Sheet.
- Write the Program Clearly Specifying - Registers used, Functionalities of
the instructions used in the program, Program and Data Memory used, Input
and expected Output of the program. (15)
- Write and Execute the Program in Dyna-85 Kit and Verify the results (10)
- Write a brief description on the registers of 8085 Microprocessor (5)
- Attend the Viva (10)
- Lab File Preparation (20)
 Government College of Engineering & Textile Technology
Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
16 Write a program in 8085 assembly language to add two 8-bit numbers stored in the
memory locations E100H and E101H, and store the result in memory location
E102H.
- Write the Program Clearly Specifying - Registers used, Functionalities of
the instructions used in the program, Program and Data Memory used, Input
and expected Output of the program. (15)
- Write and Execute the Program in Dyna-85 Kit and Verify the results (10)
- Write a brief description of the data transfer instructions of 8085
Microprocessor’s Instruction Set (5)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
17 Write a program in 8085 assembly language to subtract two 8-bit numbers stored in
the memory locations E200H and E201H, and store the result in memory location
E202H.
- Write the Program Clearly Specifying - Registers used, Functionalities of
the instructions used in the program, Program and Data Memory used, Input
and expected Output of the program. (15)
- Write and Execute the Program in Dyna-85 Kit and Verify the results (10)
- With proper example differentiate the direct, indirect and immediate date
access (5)
- Attend the Viva (10)
- Lab File Preparation (20)
 Government College of Engineering & Textile Technology
Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
18 Write a program in 8085 assembly language to store 8AH in Reg E and 7FH in Reg
E. Now subtract the content of Reg D from the content of Reg E and store the result
in Reg C.
- Write the Program Clearly Specifying - Registers used, Functionalities of
the instructions used in the program, Program and Data Memory used, Input
and expected Output of the program. (15)
- Write and Execute the Program in Dyna-85 Kit and Verify the results (10)
- Write a brief description of the instructions XTHL and SPHL (5)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
19 Write a program in 8085 assembly language to Store F1H in Reg D and 0FH in Reg
B. Now Add the contents of Reg D and Reg B and store the result in Reg C.
- Write the Program Clearly Specifying - Registers used, Functionalities of
the instructions used in the program, Program and Data Memory used, Input
and expected Output of the program. (15)
- Write and Execute the Program in Dyna-85 Kit and Verify the results (10)
- Write a brief description on the logic and bit manipulation instructions of
8085 Microprocessor’s Instruction Set (5)
- Attend the Viva (10) - Lab File Preparation (20)
-

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
20 Write a program in 8085 assembly language to swap the content of two memory
locations E201H and E202H.
- Write the Program Clearly Specifying - Registers used, Functionalities of
the instructions used in the program, Program and Data Memory used,
Input and expected Output of the program. (15)
- Write and Execute the Program in Dyna-85 Kit and Verify the results (10)
- Describe the function of SHLD and LHLD instructions (5)
- Attend the Viva (10)
- Lab File Preparation (20)
 Government College of Engineering & Textile Technology
Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
21 Write a program in 8085 assembly language to increment the content of memory
location E201H, and copy the result in memory location E301H.
- Write the Program Clearly Specifying - Registers used, Functionalities of
the instructions used in the program, Program and Data Memory used,
Input and expected Output of the program. (15)
- Write and Execute the Program in Dyna-85 Kit and Verify the results (10)
- Write a brief description on the arithmetic instructions of 8085
Microprocessor’s Instruction Set (5)
- Attend the Viva (10)
- Lab File Preparation (20)

Government College of Engineering & Textile Technology

Serampore
Digital Electronics & Microprocessor Lab
B.Tech/TT/APM/ES-TT-492/2023
Time Allotted : 3 Hour Total Marks : 60
22 Write a program in 8085 assembly language to decrement the content of memory
location E221H, and copy the result in memory location E331H without using Reg
A.
- Write the Program Clearly Specifying - Registers used, Functionalities of
the instructions used in the program, Program and Data Memory used,
Input and expected Output of the program. (15)
- Write and Execute the Program in Dyna-85 Kit and Verify the results (10)
- Write a brief description of the system bus of 8085 Microprocessor (5)
- Attend the Viva (10)
- Lab File Preparation (20)