RAILWAY ENGINEERING (CENG 4242)

CHAPTER 4 RAILWAY STATION

 CHAPTER 4 RAILWAY STATION
 Definition, basic tasks and classification of
railway station
 Distribution and location of stations
 ideas about crossing station 、overtaking station
、district station 、marshalling station 、railway
terminal and high-speed station
 Layout of intermediate station

2
 4.1 Definition, Basic tasks and
Classification of railway station
Definition
Station is a basic production unit of railway transportation,
integrating technical equipment relating to transportation.

3
Basic tasks
Passenger traffic service and goods traffic service, such as
passengers’ boarding and alighting, goods consignment,
goods loading and unloading, goods delivery and
safekeeping, etc.

boarding and alighting goods consignment

4
 Various technical operations of railway transportation , such as
train reception and departure, passing, overtaking, disassembly
and marshalling, change of locomotive and train crew, train
technology and freight examination

train reception and disassembly and train technology and

departure marshalling freight examination
5
Classification
According to the character of technical operation
In passenger traffic line: the overtaking station, the
intermediate station, and the originating train departure-
arrival station
mixed passenger and freight railway: crossing
station, overtaking station, the intermediate station,
district station and marshalling station
According to the passenger and freight traffic volume
in passenger traffic line: super-large station, large
station, medium station, and small-sized station
mixed passenger and freight railway ：super class
station, Class-I, II, III, IV and V stations
6
 4.2 Distribution and location of station
• Meaning of distribution and location of station
– Complying with the transportation requirement,
distribution and location of station shall be
confirmed after comprehensively considering
factors including topographical and geological
conditions, difficulty degree of engineering;
conditions for other tracks connecting, and
whether it is convenient for local passenger and
freight transportation

7
8
• Basic principle of distribution of station
– To ensure an enough passing capacity, a railway
line is divided into several sections.
– Combining distribution of station with route
selection

Fig. diagram of section in a single-line railway section, with

home signal s as train spacing point of sections. 9
• Steps for distribution of station
– railway line for passenger traffic
• firstly distribute the large station according to the
distribution of cities along the route of line, and then
distribute medium and small station based on the
plane location
– line for mixed passenger and freight traffic
• firstly distribute district stations together with the
design of locomotive routing; then combining the
paper location of line, distribute generally
intermediate station, passing station or overtaking
station to meet the required passing capacity

10
 4.3 Rules for station distribution and Location
Distribution of district station for mixed passenger
and freight railway
Method of distribution of station
District station
 District station is one kind of important technical
operation stations on mixed passenger and freight
railway
 Distribution of district station has great influence
on the strike of alignment, engineering and
operation conditions, especially the operation
efficiency of the locomotive.
11
• Distribution of district station
Rules for distribution
• District station shall be layout together with the location
of track connection station
- Using the basic depot of the existing line
- the newly built basic depot of the design line and
turn back at the district station of the existing line

Using the basic depot of the existing line 12

 Rules for distribution

The newly built basic depot of the design line and turn back
at the district station of the existing line

13
 Rules for distribution

Try to close to large cities, larger towns industrial and

mining enterprises to meet the requirements for
collection and distribution of passenger and freight
flow and improve the production and living conditions
of the railway personnel.

Location of station shall be planned in accordance with

the development of the city and town.

14
 Rules for distribution
District station shall be located in the place in plain
terrain and sound geological condition, with less
farmland, convenient for treatment of “waste gas, waste
water and waste residue” and with convenient water
source and power supply.

To reduce investment in train reorganization

equipment and complete assisting vehicle equipment, it
is suitable to set up the district station at train transfer
places and assisting vehicle pick-up places.

15
Distribution of Intermediate Station, Passing Station or
Overtaking Station(mixed line for passenger and
freight)

Purpose of setting the stations

To meet the desired carrying capacity of railway and
serve the passenger and freight transportation of urban and
rural along the line.

The passing station and overtaking station shall be

distributed according to the running-time standards of
freight trains required by carrying capacity

16
 The annual traffic capacity and number of carriage
pairs shall meet the national requirements

The station distribution of newly-built double-track

railway shall apply different standards according to
the various categories of trains, pairs of passenger
trains and running speeds
Designed Running Speed
160 140 ≤120
（km/h）
Pairs of Passenger Train —
≤30 >30 ≤20 21～40 >40
（pair/d）
Type of E 20 25 20 30 25 20
Locomotive D 25 40 35 45 40 —

17
The intermediate station for passengers and freight
transportation shall be properly distributed as per
the average daily volume and in combination with
other transport ways in local areas, and in
coordination with the urban or regional program.

In particular, the intermediate station shall comply

with the technical operation requirements, if any.

Topographical, geological, hydrographic and

railway operation conditions shall be taken in to
consideration

18
Distribution of Intermediate Station, Passing Station or
Overtaking Station(mixed line for passenger and freight)

The shuttle running time of the adjacent districts in single-

track technical station shall be shorter than the maximum
shuttle running time from station to station. The regulations
are specified as follows:
 Running time between the adjacent stations in the district
station shall be reduced by 4 min in district station
respectively;
 In other technical stations, if the carrying capacity from
station to station is influenced by the technical operation
time, and such influence cannot be eliminated easily in the
future, the station-to-station running time needs to be
reduced as required
 Minimal inter-station distance of newly-built railway:
Single-track: no less than (≥) 8km
Double-track: no less than (≥) 15km
The intersection distance of railway junction terminal
shall be no less than (≥) 5km.
Stations in too short distance will cause additional
construction and operation costs, and even worsen the
operational indicators.

Distance between station (High-speed line for passenger traffic ）

The distance between two stations of high-speed railway with
passenger transportation business is mainly constrained by the
city layout and distance between cities.

20
 In addition, as train running speed of high-speed railway is not
the same, it’s necessary to set up an overtaking station
between passenger stations with long-distance for high-speed
railway to keep the distance between stations balanced

 Generally, the average distance between two stations including

an overtaking station is preferably 30-50 km. When the
distance between naturally distributed passenger stations is
longer than 50 km, if the section enjoys unlimited throughout
capacity, and no overtaking station is set in the section, future
station-adding condition shall be maintained.

21
 Distribution of large intermediate stations
Large intermediate station of special line for passenger
train is usually set in the railway junction terminal,
municipality and provincial capital city, and enjoys
abundant passenger transportation business

 Large intermediate stations mainly deal with service for

stopping of most high-speed and medium-speed trains, and
passing operation of few high-speed and medium-speed trains
as well as starting and ending operation of many high-speed
trains.

22
To attract passengers from large and small cities along the
railway, general intermediate station of special line for
passenger train is distributed as per the location of
municipality, county town and county-controlled city
along the railway.

the distribution of High-speed passenger dedicated line

shall be good for attracting passengers from large and
small cities along the railway.

23
 Other factors:
 When the high-speed railway line is close to the
track-connection passenger station of the existing
railway (connecting the existing stations of main line
in many directions), with more passengers transiting
high-speed line and local reception and departure,
high-speed station should be set near the existing
station preferably

24
– Distribution of station shall meet the needs of distribution
of passenger flow, travel convenience for urban dwellers,
train operation optimization, design capacity and
maintenance. distribution of station should also be
convenient for travelling at traffic hubs

25
 Location of station
Rules
 Combining the urban and rural layout and meeting
the requirement of local passenger and freight
transportation
 Engineering conditions including landform, geology,
relocation and reconstruction
 Making full advantage of the existing railway facilities
 Combination of station location and urban planning
 Reasonable combination between station location
selection and section main line

26
Location of station

27
 Passing and overtaking stations
Passing station
 Passing stations are set on the passenger-and-freight
single-track railway
 It deals with the arrival and departure, meeting and
passing. Besides, there may be a little passenger and
freight business.
 Arrival-departure tracks shall be laid in passing
stations, and facilities for communication, signal, and
passenger alighting and boarding as well as technical
offices shall be provided

28
Passing station
Passing station layout diagram
transverse station

tandem station
 Overtaking Station
 Stations set on double track railways and responsible
for dealing with the surpassing of trains travelling in
the same direction are called overtaking stations.
 The main task of overtaking station is to deal with the
passing-through of the trains on the main line, entering and
exiting the arrival-departure track of waiting trains and
stop-and-waiting of trains.
 Overtaking station on passenger-and-freight railway may
deal with shunting of trains in opposite directions when
necessary, and a little passenger and freight business.
 Arrival-departure tracks shall be laid in passing stations,
and facilities for communication, signal, and passenger
alighting and boarding as well as technical offices shall be
provided. 30
Overtaking station layout diagram

Overtaking station with one single arrival-departure

track for passenger and freight
 4.4 Intermediate station Layout
Operation
Commercial operation
ticketing
passenger alighting and boarding
luggage receiving and distributing
freight consignment storage and handover

boarding and alighting

goods consignment
32
 Technical operation
dealing with the passing and surpassing and departure of
trains
attaching and detaching
less-than-carload train shunting
taking-out and placing-in of cars and loading-unloading
operations
 special line operations are offered for double line railway to
adjust the trains in opposite directions. Operations such as
assisting vehicle attaching and detaching, waiting and turn-
around and preparation shall be dealt with at intermediate
stations for locomotive turnaround as well as those for
assisting vehicle starting and ending.
33
Layout diagram

Single-track Intermediate Station Diagram

Double-track Intermediate Station Diagram

34
 Main equipment of facilities

• Passenger traffic facility

– passenger station building
– Platform
– level corridor or overpass facilities

35
 Passenger station building shall coordinate with urban
planning and the general layout diagram of the station and shall
be convenient for passenger passing

The station building shall be placed near residential area and

to the best shall be erected at the middle part so that the
passengers alighting and boarding may be as convenient as
possible.

36
Passenger platform
classification
Basic and intermediate platforms
Length of platforms
length of the platform shall be set as 300~500m,
subject to the recent passenger amount and train
length and enlargement needs.
When passenger amount is relatively small and
the train is relatively short, the platform length
may be reduced properly.
37
Width of platforms
Single-track railway intermediate platform
width shall be no less than 4m and double
track railway shall be no less than 5m. When
overpass facilities are provided the platform
shall be widened as needed.
Height of platform
High platform（1100mm）
Middle platform（500mm）
Low platform（300mm）

38
 Relation between platform and building

•Level track

•Above track
•Under track
Passenger traffic facility
Passenger station building
Relation between platform and building
The scale of station building is subject to the largest
number of the passengers waiting for trains at one time.
Intermediate station building scales are mostly medium or
small, and generally fixed design is adopted. Common
capacity of small station building may be 50, 100, 200
and 400 persons.

•level track •Below track

•Above track
Level passageway and overpass (bridge) facilities
Level passageway
1~2
At the two ends or middle
overpass (bridge)
over-bridge
tunnel

41
• Goods equipment
– One or two level corridors shall be provided between
the main platform and intermediate platform for
passage, the corridor shall be no less than 2.5m wide.
– When needed, overpass and subways may be
constructed in large and medium station where the
passenger amount (i.e. the alighting and boarding
persons) is large.

Fright yards
Include Warehouse, freight platform, freight track,
loading and unloading facilities, freight offices

42
Freight platform
ordinary platform——1.1m higher than the top of
rail
high platform ——over 1.1m higher than the top
of rail
Tracks Equipment
Main line
Station tracks
arrival-departure track
freight track
lead track
storage siding
Private sidings
Branch
special line
industrial enterprise line
tracks for special purposes
safety line
refuge siding
Typical layout of freight yard

45
Home work- Assignment…

Plane Calculation of Intermediate

Station….Next