®Mowilith LDM 1871 C
Technical Data Sheet Effective Date: 12.06.2019
Characteristics Stabilization
Mowilith LDM 1871 C is an aqueous copolymer Polyvinyl alcohol and surfactants
dispersion based on vinyl acetate and ethylene.
Industries Why Mowilith LDM 1871 C?
Mowilith LDM 1871 C is a raw material for the Universal binder for the formulation of low
paints and coatings industry. It is used in the odour paints with outstanding scrub
formulation of low odour interior coating resistance and good anti-blocking
systems such as properties at excellent workability.
Low emission interior mat paints Good compatibility with a wide range of
thickeners, defoamers, fillers and pigments.
Low emission interior satin paints
However, the use of acrylic thickeners may
Low emission interior masonry paints cause some stability problems.
Low emission resin-bound plasters and Performance may vary depending on your
textured coatings formulation. Please contact our Application
Technology Group to assist you.
Primers
Deep shade paints
Supply Specification Adjusted Standard* Unit Value
Solids content (130 °C; 30 min) ISO 3251 % 52 – 54
Brookfield viscosity (25 °C; 3/20) ISO 2555 mPa∙s 1000 – 4000
pH value (neat) ISO 976 4.0 – 5.0
Further Typical Properties Adjusted Standard* Unit Value
Minimum film forming temperature ISO 2115 °C approx. 0
Glass transition temperature ISO 16805 °C approx. 12
* Celanese test method, based on the respective ISO standard. Further details regarding the test method can be made available on request.
Guidelines for Preservation and Product Safety, Regulatory Status
Storage and Environmental Protection
Mowilith LDM 1871 C has a minimum shelf life of Please employ the usual protective measures
6 months from the ex-warehouse date in its while handling aqueous polymer emulsions.
original unopened packaging, provided the Further product safety or regulatory information
product is stored hygienically at temperatures can be obtained from our safety data sheets at
between 5 and 35 °C, avoiding frost and direct www.celanese.com/msds and our regulatory
sunlight. data sheets which are available on request.
The dispersion contains some initial biocides to
impede attack by microorganisms.
In order to protect the product appropriately
against microbiological attack after the first
opening and storage thereafter in opened
drums, tanks or other storage facilities, please
consider adding a suitable preservative.
Furthermore, it must be ensured that already
opened drums and containers are always tightly
closed. All tanks and pipework should be kept
adequately clean.
Skins or lumps can form during storage and
transport of the dispersion due to its film
forming nature. A filtration or sieve process is
recommended before further processing. For
bulk storage, regular stirring is common practice.
As of its effective date, this Technical Data Sheet supersedes and is in lieu of all former Technical Data Sheets of
Mowilith LDM 1871 C.
This information is based on our present state of knowledge and is intended to provide general notes on our Celanese Sales Germany GmbH
products and their possible uses. However, we do not assume any liability whatsoever for the accuracy or D-65843 Sulzbach (Taunus)
completeness of the information contained herein. It should therefore not be construed as an expressed or Tel.: +49 69 45009 2162
implied warranty of specific properties of the products or for its suitability for a particular use. Any existing
industrial property rights must be observed. The quality of our products is governed by our General Conditions [email protected]
of Sale. In every case we urge and recommend that purchasers before using any product in full scale production
make their own tests to determine to their own satisfaction whether the product is of acceptable quality and is www.celanese.com/emulsion-polymers
suitable for their particular purposes under their own operating conditions.
