Multiway
manifold mounted ball valves
KH3P / KH4P
Model code
(also order example) KH3P 16 L 1114 02 X ...
Designation
KH3P = 3-way manifold mounted ball valves
KH4P = 4-way manifold mounted ball valves
Nominal bore
(DN)
Ball bore
L, T, X
(according to table on next page)
Materials
Housing, blanking plug, screw plug
1 = steel
3 = stainless steel
Ball spindle
1 = steel
3 = stainless steel
Ball seal
1 = POM (polyacetal)
Soft seal
4 = FKM (Viton)
(other materials on request)
Handle
09 = without handle
PN up to 400 02 = aluminium clamped handle, cranked
DN 06 - 20
Series
(determined by manufacturer)
Special model
SO ... = special model to customer specifications
180° = 180° switch
(Please see examples on the next page)
EN 5.509.8/10.19
105
Standard types
Ball bore Switch Function diagram SO ...
Model
KH3P L 0° - 90° –
T 0° - 45° 45 Grad
T 0° - 90° –
T 0° - 90° - 180° 180 Grad
L 0° - 45° - 90° SO 378
T 0° - 45° - 90° SO 379
KH4P T 0° - 90° –
X 0° - 45° 45 Grad
X 0° - 90° –
L 0° - 90° - 180° 180 Grad
T 0° - 90° - 180° 180 Grad
X 0° - 45° - 90° SO 385
T 0° - 45° - 90° SO 389
EN 5.509.8/10.19
* - detent position at 45°
- - - undefined switching position
Other models or special ball bores on request
106
3-way and 4-way manifold mounted ball valve with cranked aluminium handle
O-ring
DN Int. diam. L1 L2 L3 L4 H H1 H2 H3 D1 D2 D3 D4 SW 1 SW 2 T
L – T – X
06 5 5 4.5 103 90 70 68.6 57 40 11 22 -- 6.5 11.7 6 12 27 1.9
10 9 9 6 113 100 80 81 67.5 50 11.5 27 -- 9 14.7 8 14 30 1.9
16 12 12 10 152.5 140 90 115.4 77.5 60 11.5 31.5 150 13.5 19.7 13 14 41 2
20 18 18 14 184 170 100 137 92 73 11.5 36 180 13.5 28.8 18 17 46 2
DN A C O-ring Weight (kg) Pressure range PN [bar]
06 163 52 7.3 x 2.4 2.5 400
10 183 54 10.3 x 2.4 3.7 315
16 183 54 15 x 2.5 7.5 315
20 227 55 24 x 2.5 13.1 250
Interface for 3-way and 4-way manifold mounted ball valve
bore not applicable for KH3P
Required surface finish
on interface area
Dimensional tolerances
ISO 2768 m
DN Y1 Y2 Y3 Y4 Y5 Y6 X1 X2 X3 X4 X5 d2 M Cheese-head screw Torque
ISO 4762 MA [Nm]*
(property class)
06 0.7 35 70 69.3 68.6 34.3 0.7 35 70 69.3 68.6 6 M6 M 6 - 12.9 10
EN 5.509.8/10.19
10 -0.5 40 80 80.3 81.0 40.5 -0.5 40 80 80.5 81.0 8 M8 M 8 - 12.9 20
16 -12.7 45 90 102.7 115.4 57.7 -12.7 45 90 102.7 115.4 13 M 12 M 12 - 12.9 65
20 -18.5 50 100 118.5 137.0 68.5 -18.5 50 100 118.5 137.0 18 M 12 M 12 - 12.9 70
* Standard values for friction coefficient µ 0.14
107
Technical specifications
Mounting position: No orientation restrictions
Ambient temperature: -10 °C to +80 °C
Nominal pressure: up to PN 400 (see pressure range)
Operating fluids: Mineral oil to DIN 51524 part 1 and part 2
(other fluids on request)
Temperature of operating fluid: -10 °C to +80 °C
Spare parts: Seal kits available on request
Accessories: All ball valves can be supplied with the following options: Actuator
Limit controls
Lock
NOTE
The information in this brochure relates to the operating conditions and applications
HYDAC Accessories GmbH
described. For applications and operating conditions not described, please contact
Hirschbachstr. 2
the relevant technical department.
EN 5.509.8/10.19
66280 Sulzbach/Saar
The operator is always responsible for determining the product suitability for the Tel.: +49 (0)6897 - 509-01
specific application. Quantified values for product characteristics are average values Fax: +49 (0)6897 - 509-1009
for a new product that undergo a time deterioration process. Internet: www.hydac.com
Subject to technical modifications and errors. E-Mail: [email protected]
108
