SFLM QuickStart: Automatic Method (internet access required)

Install the Software package using the CD-ROM. The STEP 4

STEP 3
installation process differs between UNIX/Linux/Windows. In case you can not connect to “http://www.sflm.net”,
Press the “Register Online”button Click the “Automatic Update” or “Install Saved File” button.
Please follow one of directions according to your platform: please perform Offline Registration. For more information ,
see Step 3 of Offline Registration section on the reverse side.
Installation on UNIX/Linux
1. Install the SFLM Service using the command:
/<install directory>/bin/sflm
2. Enter your password of managing the license server, Installing the License File
which you have already specified in installing Software
Package: If you do not intend to download your license file
automatically, copy the license file to your mount or
Administrator Password:? local drive so that the license server can read it.
3. Your web browser (Netscape or Mozilla) will pop up.
Note: If not, please perform Remote Registration STEP 5
described on the reverse side
STEP 4 STEP 1
If “Install Saved File” was selected in Step 4, click the
Fill in the each blank of Email Address, Company, Telephone, Enter http://127.0.0.1:3162 or http://<server-
“Browse...”button to locate the license file. After specifying
Contact Name. Then click “Next” button. name>:3162 into your browser’s address bar (See
the saved license file, click “Next”.
“Remote Registration”). For this example, <servername>
is mrtall.
Installation on Windows
1. Run the package installation and ensure “Licensing”
is selected.
2. Enter any password when promoted, it is important to
keep this for future SLFM administrative tasks.

Hereafter, the UNIX/Linux/Windows user will follow the

same installation steps below.
STEP 2 STEP 6
STEP 1 Click the “Install New License(s)” button. Click “Show Valid License(s)” button.

Enter http://127.0.0.1:3162 or http://<server- STEP 5

name>:3162 into your browser’s address bar (See Click “Next” button again.
“Remote Registration”). For this example, <servername>
is mrtall.

STEP 7
STEP 6 The list of available products and the number of each product will
STEP 3 show up on the window.
When the ID with letters beginning from “0SSMID” appeared
STEP 2 Enter the password which has already been registered
for the machine IDs, this means that registration process was
through Online/Offline registration.
Enter the password which you have already registered in completed. You must notify your vendor this ID for the license
installing Software Package. to be issued. After the vendor has sent you the license file, you
need to install this file following the steps of the “Installing the
License File” section below:

STEP 8
Configure each application installation to use the new serever
by using sflm_access. Ensure the new server is present in the
list of available servers or add it using configure->add->local
server from within sflm_access.
 SFLM QuickStart: Manual Method (no internet access)
Install the Software package using the CD-ROM. STEP 2 STEP 5 STEP 7
The installation process differs between UNIX/Linux/ Enter the password which you have already registered in installing After you receive the Code Name and the Activation When the ID with letters beginning from “0SSMID”
Windows. Please follow one of directions according Software Package. Code from the vendor, perform Step 1 to 5 again, then appeared for the Machine IDs, this means that
to your platform: click “Next”. registration process was completed successfully.
You must notify your vendor this ID for the license to
Installation on UNIX/Linux be issued. After the vendor sent you the license file,
you need to install this file following the steps of the
1. Install the SFLM Service using the command:
“Installing the License File” section on the reverse side.
/<install directory>/bin/sflm -install
2. Enter your password of managing the license server,
which you have already specified in installing Software
Package:
Administrator Password:?
3. Your web browser (Netscape or Mozilla) will pop up.
STEP 3
Note: If not, please perform Remote Registration
described on this page. Press the “Register Online”button

Installation on Windows
1. Run the package installation and ensure “Licensing”
is selected.
2. Enter any password when promoted, it is important to
keep this for future SLFM administrative tasks.
STEP 6

Enter these information to each blank on the window,

then click “Next” again.
STEP 4
Hereafter, the UNIX/Linux/ Notify your vendor the information of Machine
Windows user will follow the Credentials, Machine ID, and Machine keys
same installation steps below.
displayed on the screen. Wait until the vendor informs
you the Code Name and the Activation Code, which
may take several days.

STEP 1
Enter http://127.0.0.1:3162 or http://<servername>:
3162 into your browser’s address bar (See “Remote Remote Registration
Registration”). For this example, <servername> is
mrtall. If the local license server does not have a web
browser or access to the internet all web based
actions can be performed from another machine on
your network. To access the SFLM administration
pages use the address http://<server_name>:3162 or
http://<server_ip_address>:3162
The Silvaco Management Console (sman) also has
the ability to launch a web browser to the SFLM
management pages,