STD-AIA/NAS NAS 1130-ENGL 2000 0318743 0507142 855 m

www.DataSheet4U.com

--`````,,`,```,```,,``,`,,`,,-`-`,,`,,`,`,,`---
l

CQrOITION

R MIN TANGENT

SEE V I E W 8
List of Current Sheets
+E MAX^ ENLARGED VIEW B r NO I Rev

SECT. A-A
_"
THIRD
ANGLE
CUSTODI*N HATIOWAL AEROSPACE STANDARDS COCBIITTEE PAOJECTION
I CLLSSlFSITBN
PRCCURLMENT TITLE
INSERT, SCREW THREAD STANDARD PART

COPYRIGHT 2003; Aerospace Industries Association of America, Inc. (AIA/NAS) t Document provided by IHS Licensee=Naval Rsch Lab/5929363100, User=, 07/09/2003
09:19:47 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
 STD*AIA/NAS NAS 1110-ENGL 2000 W 03187q3 0507143 791
Ael uapabt:
Industries NATIONAL AEROSPACE STANDARD
oCOPVRM3HT 2000 AEROSPACE INWSTRILS ASSOCUIXHIOF MEIIICI WC.ALL WHR RESERVED
www.DataSheet4U.com
Association
-
TABLE 1 DIMENSIONS

1 DUMETER NOMINAL LENGTH 1.5 DIAMETER NOMINAL LENGTH

NOMINAL WEIGHT LENGTH THREAD N M THREAD LENGTH WEIGHT M N
THREAD SIZE (REF) LBll00 *l *.25 SUE (REF) LBllOO *l ì.25
SIZE COIL COILAND AND COIL COIL
LENGTH (1.) (2)OO.) LENGTH (1 .) (2.) (10)
DASH NO DASH NO
.086-56 -02- 1o .O86 .O05 1 1.500 3.000 -02-15 .I29 .O084 2.625 5.250
.I1240 44-10 .112 .o121 1.375 2.750 2.375 .O196 4.750
' .138-32 .138 -06-10.O243 1.375 2.750 -06-15
,164-32 -08-10 .O355 .164 1.750 3.500 -08-15
.190-24 -3C-10 .O573 .190 1.4375 2.875 -3C- 15
.190-32 6.875 -3-10 3.4375
.O414 .190 2.0625 4.125 -3-15
.250-20 -4-10 .250 -4-1 5 .145
3.375 1.6875 5.750 2.875
.250-28 8.250 .250 -4F-104.125
.lo9 2.500 5.000 -4F-15

I 2 DIAMETER NOMINAL LENGTH

~ II 2 5 DIAMETER NOMINAL LENGTH 1
NOMINAL WEIGHT
LENGTH THREAD M N WEIGH M N
THREAD SIZE (REF) LBllOO ì.25 kl T &I *.25
SIZE AND COIL COIL LBll O0 COIL COIL
LENGTH (1 .) (2)(10.1 (1.1 (2.) (10)
DASH NO DASH NO
.086-56 .172 -02-20,0117 -02-25
7.375 3.6875 .215 9.625
. I 12-40 44-20 .U4 .O272 3.375 6.750 .280 8.875

--`````,,`,```,```,,``,`,,`,,-`-`,,`,,`,`,,`---
.138-32 -06-20 .276 ,0525 3.4375 6.875 -06-25 .345 5.4375 8.875
.164-32 -08-20 .328 8.375
4.1875 ,0776 -08-25 ,410 10.750
.190-24 -3C-20 .380 .I330 7.125 3.5625
-3C-25 .475 5.6875 9.250
.190-32 -3-20 ,380 .I12 9.500 4.750-3-25 .475 7.500 12.000
,250-20 4-20 ,500 8.000 4.000 .308 .625 6.375 10.375
,250-28 -4F-20 soo 1 1.375
5.6875 .212 4F-25 h25 14.500

2 DIAMIETER NOMINAL LENGTH

NOMINAL I THREAD LENGTH WEIGHT M N
(REF) LBllOO *1 h.25
COIL COIL
(1.1 (2H10.1
DASH NO
.086-56 -02-30 .258 .O183 8.1875 11.875
. I 1240 -04-30 .336 10.875
7.500 .O423
.I3 8-32 -06-30 ,414 .O807 10.750 7.4375
,164-32 -08-30 .492 .I25 13.250 9.0625
.190-24 -3C-30 SI0 11.375 7.8125 .219
.190-32 -3-30 ,570 .I70 10.125 14.875
.250-20 -4-30 .I50 ,490 12.750 8.750
.250-28 -4F-30 .I50 .338 11.9375 17.625

-
TABLE 2 DIMENSIONS o
1
NOMINAL A B C D E F J
THRWU)

'IZEMIN GAGE MIN MAX MIN MAX MIN W ' r n

.O156 .I10
.O126 .O116 .I07
,0112 .I19
,11240 .O1584 .O1624 .O189 .O219 ,144 .159 ,141
,138-32 .O1985 .O2030 .O233 ,0273 .I78 .I74 .I93
164-32 .O1985 .O233 .O2030
.O273 .205 220 ,200
,190-24 .O2656 .O2706 ,0305 .259 .244 4
,237 .O365 ,0075
.190-32 .O1985 .O2030 .O233 .236 256
.O273 .226 5 1 .O056 ,0098
.250-20 .O438 .310
.O378 .O3248 .307
.330 .O3198 5 1 .o090 .O156
,02320 ,0253
.O2270 .O313 .306 326 ,291 5 .o064

NAS1130
SHEET 2 OF 3
USE OF OR RELlANCE UPONTHIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY.AIA DOES NOT QUALIFY SUPPLIERSOR CERTIFY
CONFORMANCE OF ITEMS PROCURED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION ORC W M RESPECTING(1) THE SUITABILITY OF
ITEMS FOR ANY PARTICULAR APPLICATION, OR(2) THE EXISTENCEOF OR APPLlCABlLrPl THERETOOF PATENT OR TRADEMARK RIGHTS.
COPYRIGHT 2003; Aerospace Industries Association of America, Inc. (AIA/NAS) t Document provided by IHS Licensee=Naval Rsch Lab/5929363100, User=, 07/09/2003
09:19:47 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
 T D . A I A / N ANSA S 3330-ENGL 2000 D 0338743 0 5 o Y L 4 4 D
ne1 u s p a b e
Industries NATIONAL AEROSPACE STANDARD
www.DataSheet4U.com Association cCoww(wT 2000 AERDSPACE -l'RE8 ASSOCIAIKWIOF AMUIICI. WC.ALL R E S E W

MATERIAL: TYPE 304 (UNS S3O400) CORROSION RESISTANT STEEL PER AS7245. @
FINISH: - NONE.
- I.
DRY FILM LUBRICANT IN ACCORDANCE WITH MIL-L-46010, TYPE
-
CADMIUM PLATED IN ACCORDANCE WITH QQ-P-416, TYPE
II, THICKNESS SHALLBE A MAXIMUM OF.0001.
AS A MINIMUM ALL SURFACES SHALL SHOW VISUAL EVIDENCE OF CADMIUM PLATMG.

-
CODE: FIRST DASH NUMBER DESIGNATES INSERT THREAD SIZE AS TABULATED.

--`````,,`,```,```,,``,`,,`,,-`-`,,`,,`,`,,`---
-NO LElTERAFTER THE FIRST DASH NUMBER DESIGNATES FREE RUNNING.
--
ADD L AFTERTHE FIRST DASH NUMBER TO DESIGNATE SELF-LOCKING.
SECOND DASH NUMBER DESIGNATES LENGTH AS TABULATED.
-
NO LEITER AFTER THE SECOND DASH NUMBER DESIGNATESNO FINISH.
--
ADD D AFTER THE SECOND DASH NUMBERTO DESIGNATE DRY FILM LUBRICANT.
ADD P AFTERTHE SECOND DASH NUMBERTO DESIGNATE CADMIUM PLATE.

EXAMPLE OF PART NUMBERS:

NAS1130 -2L 2

1L I"FINISH CODE

LENGTH CODE AS TABULATED

TYPE CODE

THREAD SIZE CODEAS TABULATED

DOCUMENT NUMBER

NAS 113044-15 = A TANGLESS, FREE RUNNING, CORROSION RESISTANT STEEL INSERT, THREAD
1.S DIAMETER NOMINAL LENGTH.
S U E . 112-40,

NAS I 13046L20=A TANGLESS, SELF-LOCKING, CORROSION RESISTANT STEEL INSERT, THREAD SIZE .138-32,
2.0 DIAMETER NOMINAL LENGTH.
NAS I 130-3L2SD=z A TANGLESS, SELF-LOCKING, CORROSION RESISTANT STEEL INSERT WITH DRY FILM
LUBRICANT, THREADSIZE ,190-32,2.5 DIAMETER NOMINAL LENGTH.
NAS I 130-3CLlOP= A TANGLESS. SELF-LOCKING. CORROSION RESISTANT STEEL INSERT WITH CADMIUM
PLATE, THREADS E É ,190-24,l .O DIAMETER NOMINAL LENGTH.

NOMINAL LENGTH EQUALS MINIMUM THROUGH HOLE LENGTH WITHOUT COUNTERSINK AND WITH INSERT
LOCATED 114 TO ln THREAD PITCH BELOW TOP SURFACE.
THE NUMBER OF FREE COILS OFTHE INSERT ARE COUNTED FROM NOTCHTO NOTCH.
THE INSERT, WHEN ASSEMBLED IN A TAPPED HOLE AS SPECIFIED M MS33537, SHALL PRODUCE A FINISHED
THREAD MEETINGTHE REQUIREMENTSOF FED-STD-H28/2 AND SHALL ACCEPT EXTERNAL THREADED PARTS
WHICH CONFORMTO MIL-S-7742 OR MIL-S-8879.THE EXCEPTIONS TO MS33537 INCLUDE: INSTALLATIONIS
PERFORMED WITHTHE NOTCH AT EITHER ENDOF THE INSERT INSTEAD OF A TANG, AND CONSEQUENTLY, A
TANG DOES NOTHAVE TO BE REMOVED AFTER INSTALLATION. ON MS33537 A TANGLESS INSERT IS THE
EQUIVALENT TO THE TANGED INSERT WITHTHE TANG REMOVED AFTER INSTALLATION.
SURFACE ROUGHNESSIS 32 MICROINCHES ARITHMETIC AVERAGE "UMPER ANSII ASME B46.1.
DIMENSIONS ARE IN INCHES AND APPLY BEFORE PLATING. TOLERANCE UNLESS OTHERWISE SPECIFIED IS
*.O10 FOR DECIMALSAND jI S DEGREES FOR ANGLES.
INSERT COLOR IDENTIFICATION:
- NO FINISH, FREE RUNNING:NONE
-NO FINISH, LOCKING: RED (DYE)
- DRY FILM LUBRICATED,FREE RUNNING: DARK GRAY
- DRY FILM LUBRICATED, LOCKING: DARK GRAY
- CADMIUM PLATED, FREERUNNING: IRIDESCENT BRONZE OR YELLOW (CHROMATE)
- CADMIUM PLATED, LOCKING: OLIVE DRAB (CHROMATE)
SIZES. 190-24AND.250-20ARE NOT MIL-$7742 AND MIL-S-8879 PREFERRED SIZES.
THIS STANDARD TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED D O C U M E N T S SHALL BETHE ISSUE IN EFFECT ON THE DATE OF INVITATIONS FOR BID.
THE ASSEMBLED LENGTH OFTHE INSERT IS SPECIFIED ON MS33537.

I NAS1130
SHEET 3 OF 3
USE OF OR RELIANCE UPON THIS DOCUMENTOR ANY NATIONAL AEROSPACE STANDARDIS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS
OR CERTIFY
CONFORMANCE OF ITEMS PROCURED UNDER NATIONAL AEROSPACE STANDARDS.AIA MAKES NO REPRESENTATIONOR C W M RESPECTING (1) ?"E SUITABILITY OF
E M S FOR ANY PARTICULAR APPLICATION, OR (2) THE EXISTENCEOF OR APPLICABILITYTHERETO OF PATENT OR TRADEMARK RIGHTS.
COPYRIGHT 2003; Aerospace Industries Association of America, Inc. (AIA/NAS) t Document provided by IHS Licensee=Naval Rsch Lab/5929363100, User=, 07/09/2003
09:19:47 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.