Pilot Operated Cartridge Check HA 5111

Valves RJV1-05 5/2008

Size 05 · pmax up to 250 bar · Qmax up to 20 L/min Replaces

HA 5111 5/2007

q Cartridge valve for manifold mounting

2 1

q Model with subplate - enables direct moutingon

the hydraulic actuator by means of a hollow bolt

q The use of a hollow bolt with a build-in throttle

VSV1 and check valve possible VSVJ1 and VSVJ2

Functional Description
Model RJV1-05 are pilot operated check valves in position), the spring pushes the ball (2) onto the seat
cartridge design used to give leakfree closure of a and the circuit between the check valve and the actuator
hydraulic actuator port under pressure, even during is closed. The control pressure (port 1) acting on the
long idle periods. pilot piston (3) moves the ball (2) from the seat and
They basically consist of housing (1), check valve (2), makes the flow passage 3 ® 2 free. An additional port 4
and pilot piston (3). The cartridge is avaliable alredy is available for use in double acting applications using
assembled into a subplate for direct mounting onto the two pilot operated check valves-see typical circuits
actuator (page 4 of this data sheet). (page 3) and drawings (page 5).
When fluid flows from port 2 ® 3, it opens the check The valve body is blackened. The hollow bolt and the
valve automatically. When the pressure in port 2 drops surface of the subplate are phosphate coated.
(e.g. after shifting the directional valve into its middle

2(4) 1
3

2 3 1

1
HA 5111
Ordering Code

RJV1-05- /

Seals
no designation NBR
Pilot Operated Cartridge Check Valve
V Viton

Nominal size
Hollow bolt
no designation without throttle valve
S with flow throttle valve VSV1
J1 with flow throttle VSVJ1
J2 with flow throttle VSVJ2
Model (fill in just with the model with subplate)
With pilot piston seal no designation
Without pilot piston seal 0

Threads of hollow bolt

B M18x1,5
Model C M22x1,5
Cartridge valve no designation D G1/2
With subplate - connecting threads M E G3/8
3x M12x1,5 und 1x M18x1,5 (fill in just with the model with subplate)

Technical Data

Nominal size mm 05

Maximum flow L/min 20

Maximum operating pressure bar 250

Cracking pressure bar see Dp-Q characteristics

Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 51524

Fluid temperature range (NBR) °C -30 ... +100

Fluid temperature range (Viton) °C -20 ... +120

Viscosity range mm2/s 20 ... 400

Maximum degree of fluid contamination Class 21/18/15 to ISO 4406 (1999)

Area ration (pilot piston / seat) 5.76

Weight of the cartridge valve kg 0.08

Mounting position optional

2
 HA 5111

Hydraulic Circuits

Use of the pilot operated check Hydraulic circuit with two pilot operated check
valve for one direction only valves enabling movement in both directions.
(lowering). Port 4 is pluged The use of a directional valve with Y-functional
symbol ensures perfect seating of the ball,
thus ensuring tight closure of the actuator.

3 3

4 4
3
2 1 2 1

4
1 2

P T P T

Dp-Q Characteristics Measured at n = 32 mm /s

2

Pressure drop Dp related to flow rate.

40
Pressure drop Dp [bar]

30

20

10 Flow in direction
1 2®3
1 2 2 3®2

0 5 10 15 20 25
Flow Q [L/min]

3
HA 5111

Valve Dimensions Dimensions in millimeters

Cartridge valve RJV1-05

1 3 4 5

3
M24x1,5

20f8
2 1
2
33
46 1 Type code stamped
on the face (RJV1-05)
58
2 Inside HEX 10
Cavity (Tightening torque is 10+2 Nm)
3 OPKR - BBP80B 113-N9
(14.66 x 19.02 x 1.14)
45,5 +0,2 4 O-ring 15.08 x 2.62 (15.54 x 2.62)
5 O-ring 12.42 x 1.78
11 26
7,5 Edge rounded-off
1,6
M24x1,5-6H

1x45°
R0,3
20H8

12,5
50°

1,6 2

3,2
20,5 6
33,5

Spare Parts
Seal kit

Dimensions, quantity
Type Ordering number
O-ring Back-up ring Squar ring

9 x 1.8 (1 pc.) 14.66 x 19.02 x 1.14 (1 pc.) S-50119-1741-19061(1 pc)

6.07 x 1.78 (1 pc.) - -

Standard
535-0125
NBR70
12.42 x 1.78 (1 pc.) - -

15.08 x 2.62 (2 pcs.) - -

9.25 x 1.78 (1 pc.) 14.66 x 19.02 x 1.14 (1 pc.) S-50119-1741-19061(1 pc)

6.07 x 1.78 (1 pc.) - -

Viton 535-0126
12.42 x 1.78 (1 pc.) - -

15.54 x 2.62 (2 pcs.) - -

4
 HA 5111
Valve Dimensions Dimensions in millimeters

Model with subplate

- Hollow bolt without throttle valve
3

45,5
2 1

- Hollow bolt with throttle valve VSV1

3
6 1 3 2 4

41,5
61 max.

4
35

2 1
5
17,5

15,5
18,5
16,5

M18x1,5
G3/8
M22x1,5
G1/2
Æ28

- Hollow bolt with flow throttle and check valve

VSVJ1 and VSVJ2 VSVJ1 VSVJ2
3 3

41,5
61max.
35
17,5

4 4
16,5

15,5
18,5

2 1 2 1

M18x1,5
G3/8 Y
M22x1,5
G1/2
Y
Æ28

1 Hollow bolt (HEX 27)

2 Throttle valve VSV1, VSVJ1, VSVJ2 (Inside HEX 6)
3 Sealing nut SEAL-LOCK 12 x 1,5 ( HEX 19)
4 Seal D 22.5 x 28 x 1.5 - NSA
5 Type plate
6 For optimum positioning the subplate can be turned
be 180° (around the check valve axis)

5
HA 5111

- Dimension scheme of subplate with outlet 1 - 4

90

1 4

3
68

1 2
3xM12x1,5 M18x1,5

3xÆ22 Æ29

Connecting threads of hollow bolt

90°
0,01/100 mm
ÆD max
0,8 (Rmax.6,3)

Tightening torque
Port size Æ D max
(Nm)
M18 x 1.5 18+0.2 30+3
M22 x 1.5 22+0.2 70+5
G 1/2 21+0.2 70+5
G 3/8 16.6+0.2 25+3

Caution!
Ÿ The packing foil is recyclable.
Ÿ The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should
not be construed in any case as a guaranteed representation of the product properties in the sense of the law.

ARGO-HYTOS s.r.o. CZ - 543 15 Vrchlabí

Tel.: +420-499-403111, Fax: +420-499-403421
E-mail: [email protected]
www.argo-hytos.com

6 Subject to alteration without notice!