000.265.8840 Activity Based Estimate Flow Diagram Electrical Engineering Calculations

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Process Control Systems

CSA Mechanical

Building Services Piping

HSE Construction
As Applicable

Lead Engineer Engineer / Designer Engineer CALC_001 CALC_002


Engineer / Designer Engineer / Designer
Review CCED
Verify project Refer to latest copy Use standard Obtain data from
practice to achieve Complete calculation
requirements for Establish scope of of codes, standards calculation software different disciplines
the lowest possible setup
calculations calculations and specifications and ensure software
TIC
is validated

As Applicable

Engineer / Design CALC_003 Engineer Engineer Engineer Engineer CALC_004

Document basis, Check final Check final Complete final


Develop preliminary Complete preliminary
references and Develop Report calculation calculation calculation
calculation calculation
assumptions.
(See Note 3)

If Required
000.265.8840 Activity Based Estimate Flow Diagram Elecrical Engineering Calculations.vsd

Legend Notes:
1) This Activity Based Estimate Flow Diagram is a guide to the standard project work flow, especially 4) Definitions:
Electrical
Practice 000.265.9001
000.265.9001. Depending on the project, the scope of work and phase boundaries may differ
Activity IFIR = Issued for Internal Review
from this Estimate Flow Diagram.
IFR = Issued for Client Review Activity Based Estimate Flow Diagram
Other Discipline 2) This sheet is used for desk calculations not issued as a project deliverable. If calculations require to IFA = Issued for Client Approval
Interface be issued as a project deliverable use the System Study flow diagram as a basis. IFD = Issued for Design Electrical Engineering
Project 3) Calculations are archived in accordance with the project file retention procedures.
IFC = Issued for Construction Calculations
Phase 000.265.8840 Sheet 1 of 1
Date: 17Apr2018

You might also like