Scribd
Upload
16 views

How RFID Works

Uploaded by

Dev Dang
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
16 views

How RFID Works

Uploaded by

Dev Dang
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

How RFID Works

How does RFID work? A Radio-Frequency IDentification system has three parts:

 A scanning antenna
 A transceiver with a decoder to interpret the data
 A transponder - the RFID tag - that has been programmed with information.

The scanning antenna puts out radio-frequency signals in a relatively short


range. The RF radiation does two things:

 It provides a means of communicating with the transponder (the RFID


tag) AND
 It provides the RFID tag with the energy to communicate (in the case
of passive RFID tags).

This is an absolutely key part of the technology; RFID tags do not need to
contain batteries, and can therefore remain usable for very long periods of
time (maybe decades).

The scanning antennas can be permanently affixed to a surface; handheld


antennas are also available. They can take whatever shape you need; for
example, you could build them into a door frame to accept data from persons
or objects passing through.

When an RFID tag passes through the field of the scanning antenna, it
detects the activation signal from the antenna. That "wakes up" the RFID chip,
and it transmits the information on its microchip to be picked up by the
scanning antenna.

In addition, the RFID tag may be of one of two types. Active RFID tags have
their own power source; the advantage of these tags is that the reader can be
much farther away and still get the signal. Even though some of these devices
are built to have up to a 10 year life span, they have limited life
spans. Passive RFID tags, however, do not require batteries, and can be
much smaller and have a virtually unlimited life span.

RFID tags can be read in a wide variety of circumstances, where barcodes or


other optically read technologies are useless.

 The tag need not be on the surface of the object (and is therefore not
subject to wear)
 The read time is typically less than 100 milliseconds
 Large numbers of tags can be read at once rather than item by item.

You might also like