Standards Manager Web Standards List

GOST-Gosudarstvennye standarty state standard gost

Id Number Title Year Organization Page

1 K32095 Analysing Design Thinking: Studies of Cross-Cultural Co-Creation 2017 GOST 0
2 EN 13303 Bitumens and bituminous binders. Method for determination of loss of mass after heating 2016 GOST 0
3 24028 RECIPROCATING INTERNAL COMBUSTION ENGINES Exhaust Gas Smoke Standards and Test Methods 2016 GOST 0
4 32192 DEPENDABILITY IN RAILWAY ENGINEERING General concepts. Terms and definitions - Incorporating Amendment 2016 GOST 0
No.1: 12/2015
5 2.114 Unified system for design documentation SPECIFICATIONS 2016 GOST 0
6 15.016 System of products development and launching into manufacture TECHNICAL ASSIGNMENT Requirements to contents 2016 GOST 0
and form of presentation
7 R 34.13 Information technology. Cryptographic data security. Block ciphers operation modes 2015 GOST 0
8 33467 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Functional test methods for 2015 GOST 0
in-vehicle emergency call device/system and data transfer protocols
9 33434 COUPLING AND AUTOMATIC COUPLING DEVICES OF RAILWAY ROLLING STOCK Technical requirements and 2015 GOST 0
acceptance procedures
10 33555 Motor vehicles INTERNAL NOISE Permitted levels and test methods 2015 GOST 0
11 33667 Motor vehicles.Wire tips to the batteries and the starters. Technical requirements and test methods 2015 GOST 0
12 33466 Global navigation satellite system Road accident emergency response System Test methods for verification of in-vehicle 2015 GOST 0
emergency call Device/system conformity to requirements of electromagnetic Compatibility, environmental and
mechanical resistance
13 33257 Pipeline valves METHODS OF CONTROL AND TESTING 2015 GOST 0
14 33554 Motor vehicles CONTENT OF POLLUTANTS IN AIR OF DRIVERS CABIN AND PASSENGER COMPARTMENT 2015 GOST 0
Technical requirements and test methods
15 33465 Global Navigation Satellite System Road Accident Emergency Response System Protocol Of Data Exchange Between In- 2015 GOST 0
Vehicle Emergency Call Device/System And Emergency Response System Infrastructure
16 12.2.019 Occupational Safety Standards System AGRICULTURAL TRACTORS AND SELF-PROPELLED MACHINES General 2015 GOST 0
Safety Requirements
17 33464 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM In-vehicle emergency call 2015 GOST 0
device/system. General technical requirements
18 13755 BASIC NORMS OF INTERCHANGEABILITY CYLINDRICAL INVOLUTE GEARINGS BASIC RACK PROFILE 2015 GOST 0
19 33435 CONTROL, MONITORING AND SAFETY DEVICES OF RAILWAY ROLLING STOCK Safety requirements and 2015 GOST 0
inspection methods
20 EN 13021 Winter service machines. Safety requirements 2015 GOST 0
CORR
21 33471 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Test methods for navigation 2015 GOST 0
module of in-vehicle emergency call device/system
22 12.0.004 Occupational safety standards system Management of occupational safety training General requirements 2015 GOST 0
23 33223 Braking Systems of Railway Rolling Stock DEVICES OF AUTOMATIC PRESSURE CONTROL IN PNEUMATIC 2015 GOST 0
POWER ACTUATOR Safety Requirements and Inspection Methods
24 33436.1 Electromagnetic compatibility RAILWAY SYSTEMS AND EQUIPMENT Part 1 General 2015 GOST 0
25 R 12.0.001 Occupational safety standards system. Basic rules 2015 GOST 0
26 33468 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Test methods for 2015 GOST 0
verification of in-vehicle emergency call device/system conformity to requirements for loudspeaker communication in
vehicle cabin
27 12.0.003 Occupational safety standards system HAZARDOUS AND HARMFUL PRODUCTION FACTORS Classification 2015 GOST 0
28 33436.3-1 Electromagnetic compatibility of technical equipment RAILWAY SYSTEMS AND EQUIPMENT Part 3-1 RAILWAY 2015 GOST 0
ROLLING STOCK Requirements and test methods
29 33469 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Test methods for 2015 GOST 0
verification of in-vehicle emergency call system/device conformity to accident detection requirements
30 12.2.120 Occupational safety standards system REQUIREMENTS FOR OPERATOR CABINS AND WORKPLACES OF 2015 GOST 0
TRACTORS AND SELF-PROPELLED AGRICULTURAL MACHINES General safety requirements
31 33436.3-2 Electromagnetic compatibility of technical equipment RAILWAY SYSTEMS AND EQUIPMENT Part 3-2 RAILWAY 2015 GOST 0
ROLLING STOCK. APPARATUS AND EQUIPMENT Specifications and test methods
32 12.4.238 Occupational safely standards system Devices for personal protection of respiratory organs CLOSED-CIRCUIT 2015 GOST 0
BREATHING APPARATUS WITH COMPRESSED AIR Technical requirements. Test methods Marking. Sampling rules
33 33321 Railway rolling stock ACOUSTIC SIGNALLING DEVICES General specifications 2015 GOST 0
34 33470 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Test methods for wireless 2015 GOST 0
communication modules of in-vehicle emergency call device/system
35 30593 Motor vehicles HEATING, VENTILATION AND CONDITIONING SYSTEMS Requirements for efficiency and safety 2015 GOST 0
36 32913 Shock-Absorbing Apparatus of Coupling and Automatic Coupling Devices of Railway Rolling Stock Technical 2014 GOST 0
specifications and acceptance rules
37 21.613 System of design documents for construction. Rules for execution of the working documentation of power electrical 2014 GOST 0
equipment
38 24856 PIPELINE VALVES Terms and definitions 2014 GOST 0
39 32769 Rolling-Contact Bearings TAPER BEARING UNITS FOR ROLLING STOCK AXLE BOXES Specifications 2014 GOST 0
40 32776 INSTANT COFFEE General specification - Includes Corrigendum: 2016 and 2017 2014 GOST 0
41 10150 RECIPROCATING INTERNAL COMBUSTION ENGINES General Specifications 2014 GOST 0
42 30255 FURNITURE, TIMBER AND POLYMER MATERIALS Method for determination of formaldehyde and other injurious 2014 GOST 0
volatile chemicals release in climatic chambers
43 R 56218 Motor Vehicles Fuelled By Liquefied Natural Gas. Cryogenic Power Supply Systems Technical requirements and test 2014 GOST 0
methods
44 2593 COUPLING BRAKE HOSES FOR RAILWAY ROLLING STOCK Specifications 2014 GOST 0
45 30803 TRANSMISSION TOOTH GEARS OF TRACTION RAILWAY STOCK Specifications 2014 GOST 0
46 31666 DIESEL MULTIPLE-UNIT TRAINS General technical requirements 2014 GOST 0
47 32700 RAILWAY ROLLING STOCK Methods of coupling capacity inspection 2014 GOST 0
48 12.3.002 System of standards for occupational safety MANUFACTURING PROCESSES General safety requirements 2014 GOST 0
49 12.4.275 Occupational safety standards system PERSONAL HEARING-PROTECTION EQUIPMENT General technical 2014 GOST 0
requirements. Test methods
50 30698 TEMPERED GLASS Specifications 2014 GOST 0
51 32880 Parking brake of the rolling-stock. Specifications 2014 GOST 0
52 15.902 System of development and launching into manufacture RAILWAY ROLLING STOCK Procedure of development and 2014 GOST 0
launching into manufacture
53 5632 Alloyed Stainless Steels and Corrosion Resistant, Heat-Resistant and Creep Resistant Alloys 2014 GOST 0
54 10393 COMPRESSORS, ELECTRICALLY DRIVEN ‫_ذ‬OMPRESSOR SETS AND INSTALLATIONS FOR RAILWAY 2014 GOST 0
ROLLING STOCK General Specifications
55 33200 AXLES FOR WHEELSETS OF RAILWAY ROLLING STOCK General specifications 2014 GOST 0
56 19281 HIGH-STRENGTH ROLLED STEEL General Specification - Includes Corrigendum: 2016 2014 GOST 0
57 18572 Rolling-Contact Bearings AXLE BOX CYLINDRICAL ROLLER BEARINGS FOR RAILWAY ROLLING STOCK 2014 GOST 0
Specification
58 R 55513 LOCOMOTIVES Requirements for strength and dynamic properties 2013 GOST 0
59 2.120 Unified System for Design Documentation ENGINEERING DESIGN 2013 GOST 0
60 ISO 24444 Cosmetics. Sun Protection test methods. Determination of the sun protection factor (SPF) on living organisms (in vivo) 2013 GOST 0
61 EN 13075-2 Bitumens and bituminous binders. Determination of breaking behaviour. Part 2. Determination of fines mixing time of 2013 GOST 0
cationic bitumen emulsions
62 R 55437 Reciprocating internal combustion engines. Classification according to scope of automatization and technical requirements 2013 GOST 0
pertaining to automation
63 32565 Safety glass for ground vehicles General specifications - Includes corrigendum: 2015 2013 GOST 0
64 32202 COMPRESSED AIR FOR PNEUMATIC SYSTEMS OF RAILWAY ROLLING STOCK AND FOR SYSTEMS USED 2013 GOST 0
TO TEST PNEUMATIC EQUIPMENT OF RAILWAY ROLLING STOCK Quality requirements and inspection methods
- Incorporate Amendment 1: 11/2017
65 1012 AVIATION FUEL Specifications 2013 GOST 0
66 R 55434 Electric trains General technical requirements 2013 GOST 0
67 R 55530 Global Navigation Satellite System ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Functional test methods of 2013 GOST 0
in-vehicle emergency call systems and data transfer protocols
68 30804.4.4 Electromagnetic compatibility of technical equipment IMMUNITY TO NANOSECOND IMPULSIVE DISTURBANCE 2013 GOST 0
Requirements and test methods
69 R 55623 ARMOURED CLOTHES Test methods 2013 GOST 0
70 10227 Jet fuels Specifications 2013 GOST 0
71 30630.5.4 Overall performance of influence of environmental conditions appearing in nature on the technical products. Earthquake 2013 GOST 0
72 32137 Electromagnetic compatibility of technical equipment TECHNICAL EQUIPMENT FOR NUCLEAR POWER PLANTS 2013 GOST 0
Requirement and test methods
73 32203 RAILWAY ROLLING STOCK ACOUSTICS Measurement of exterior noise 2013 GOST 0
74 R 55777 SHAPE CHARGES Technical conditions 2013 GOST 0
75 EN 1196 Domestic and non-domestic gas-fired air heaters. Supplementary requirements for condensing air heaters 2013 GOST 0
76 R 55533 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Test methods for wireless 2013 GOST 0
communication modules of in-vehicle emergency call system
77 305 DIESEL FUEL Specifications 2013 GOST 0
78 R 55534 Global Navigation Satellite System ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Test methods for 2013 GOST 0
navigation modules of in-vehicle emergency call systems
79 31402 BRAKE CYLINDERS FOR RAILWAY ROLLING STOCK General Specifications 2013 GOST 0
80 1050 STEEL PRODUCTS MADE OF NON-ALLOYED STRUCTURAL QUALITY STEEL AND OF SPECIAL STEEL 2013 GOST 0
General specification
81 9238 CONSTRUCTION AND ROLLING STOCK CLEARANCE PROFILES - Includes Corrigendum: 2015 2013 GOST 0
82 R 55532 Global Navigation Satellite System ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Test methods for 2013 GOST 0
evaluation of in-vehicle emergency call system conformity to accident detection requirements
83 2.601 Unified System of Design Documentation EXPLOITATIVE DOCUMENTATION - Includes Corrigendum: 2015 2013 GOST 0
84 21.110 System of Design Documentation for Construction SPECIFICATION FOR EQUIPMENT, PRODUCTS AND 2013 GOST 0
MATERIALS - Includes Corrigendum: 2015
85 R 55531 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Test methods for 2013 GOST 0
verification of in-vehicle emergency call system conformity to quality requirements for loudspeaker communication in
vehicle cabin
86 R 52630 STEEL WELDED VESSELS AND APPARATUS General specifications 2012 GOST 0
87 R 52545.2 ROLLING BEARINGS Measuring methods for vibration Part 2 Radial and radial-thrust ball bearings 2012 GOST 0
88 20276 SOILS Field methods for evaluation of strength and strain characteristics 2012 GOST 0
89 24379.1 FOUNDATION BOLTS Design and Dimensions 2012 GOST 0
90 R 55230 MARINE, LOCOMOTIVE AND INDUSTRIAL ENGINES Fire Protection Requirements 2012 GOST 0
91 R 55364 Electric locomotives General technical requirements 2012 GOST 0
92 R 54893 LOCOMOTIVE-HAULED PASSENGER CARS AND MULTIPLE-UNIT TRAINS Paintwork and Antirust Coating 2012 GOST 0
Requirements
93 26602.4 WINDOWS AND DOORS Method for determination of total light transmittance 2012 GOST 0
94 31537 ASSEMBLAGE OF WHEELSETS FOR LOCOMOTIVES AND MULTIPLE UNITS BY SHRINK FIT METHOD 2012 GOST 0
Typical Technological Process
95 R 55182 PASSENGER CARS ON LOCOMOTIVE TRACTION General technical requirements 2012 GOST 0
96 R 54915 PAPER FOR STUDENTS WRITING-BOOKS General specifications 2012 GOST 0
97 R 55364 Electric locomotives. General technical requirements 2012 GOST 0
98 R 54965 CABLES AND WIRES FOR ROLLING STOCK OF RAILWAY TRANSPORT General specifications 2012 GOST 0
99 R 52231 AUTOMATIC SPEED CONTROL SYSTEMS (ASCS) OF MARINE, LOCOMOTIVE AND INDUSTRIAL INTERNAL 2012 GOST 0
COMBUSTION ENGINES General specifications
100 R 54618 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM Compliance test methods of 2011 GOST 0
in-vehicle emergency call system/device for electromagnetic compatibility, environmental and mechanical resistance
requirements - Includes Amendment 1
101 R 54450 DOMESTIC COOKING APPLIANCES BURNING GAS FUEL Part 2-1 Rational use of energy General 2011 GOST 0
102 R 54801 TRACTION TRANSFORMERS AND REACTORS ON RAILWAY ROLLING STOCK Basic parameters and test 2011 GOST 0
methods
103 R 54620 Global navigation satellite system ROAD ACCIDENT EMERGENCY RESPONSE SYSTEM In-vehicle emergency call 2011 GOST 0
system/device General technical requirements - Includes Amendment 1
104 R 54619 Global navigation satellite system ACCIDENT EMERGENCY RESPONSE SYSTEM Protocols of data transmission from 2011 GOST 0
in-vehicle emergency call system/device to emergency response system infrastructure - Includes Amendment 1: 2014
105 14838 Wire of aluminium and alluminium alloys for cold upsetting. Specifications - Incorporates Amendment 1: 1983, 2011 GOST 0
Amendment 2: 1988, and Amendment 3: 1998, and Amendment 4: 2011
106 IEC 60598-2-8 Luminaries. Part 2. Particular requirements. Section 8. Hand lamps 2011 GOST 0
107 520 Rolling bearings General specifications 2011 GOST 0
108 8.216 State system for ensuring the uniformity of measurements. Voltage transformers. Verification procedure 2011 GOST 0
109 31187 MAIN-LINE DIESEL LOCOMOTIVES General technical requirements 2011 GOST 0
110 R 54799 RAILWAY ROLLING STOCK Requirements for protection against electrical hazards 2011 GOST 0
111 R 54812 Auxiliary and Emergency Marine Diesel Generators Types and basic parameters. General technical requirements 2011 GOST 0
112 1452 HELICAL SPRINGS FOR BOGIES AND DRAWAND-BUFFER GEARS OF RAILWAY ROLLING STOCK 2011 GOST 0
Specifications
113 R 54413 Rotating electrical machines. Part 30. Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code) 2011 GOST 0
114 31428 SHUNTING DIESEL LOCOMOTIVES WITH ELECTRIC TRANSMISSION General technical requirements 2011 GOST 0
115 10791 SOLID-ROLLED WHEELS Specifications - Includes Corrigendum: 2012 2011 GOST 0
116 R 54721 Global navigation satellite system. Accident emergency response system. General base service description - Incorporating 2011 GOST 0
Amendment 1: 2014
117 R 50943 Snow and Swamp-Going Vehicles 2011 GOST 0
118 R 52545.3 Rolling Bearings Measuring Methods for Vibration Part 3 Tapered Roller and Radial Spherical Bearings 2011 GOST 0
119 R 52588 ABRASIVE TOOLS Safety requirements 2011 GOST 0
120 25100 Soils Classification 2011 GOST 0
121 R 54848 NANOPOWDERS OF ENERGY-SATURATED MATERIALS General specifications. Test methods 2011 GOST 0
122 11018 TRACTION ROLLING STOCK WHEELSETS FOR 1520 MM GAUGE RAILWAYS General Specifications 2011 GOST 0
123 R 51174 BEER General specifications - Includes Corrigendum: 2010 and Corrigendum: 2011 2011 GOST 0
124 9972 PETROLEUM TURBINE OILS WITH DOPES Specifications - Incorporating Amendment 1: 04/1977; Amendment 2: 2011 GOST 0
03/1979; Amendment 3: 11/1979; Amendment 4: 03/1981; Amendment 5: 05/1982; Amendment 6: 03/1983; Amendment
7: 03/1987; Amendment 8: 02/1989 and Amendment 9
125 R 54434 EQUIPMENT OF RAILWAY ROLLING STOCK Shock and vibration test 2011 GOST 0
126 8960 DUCTILE IRON FITTINGS WITH PARALLEL THREAD FOR PIPELINES. THREADED BUSHINGS BASIC 2010 GOST 0
DIMENSIONS - Incorporating Amendment 1: 09/1980; Amendment 2: 03/1983
127 R 54093 WHEELS OF RAILWAY ROLLING STOCK Methods of Residual Stresses Determination 2010 GOST 0
128 20057 FROZEN OCEANIC FISH Specifications - Incorporating Amendment 1: 12/2002 2010 GOST 0
129 2590 HOT-ROLLED ROUND STEEL BARS Assortment 2010 GOST 0
130 R 54092 SPECIAL RAILWAY ROLLING STOCK PASS-BY NOISE Standards and test methods 2010 GOST 0
131 R 53188.3 State system for ensuring the uniformity of measurements. Sound level meters. Part 3. Verification procedure 2010 GOST 0
132 R 53978 SPECIAL ROLLING STOCK General technical requirements 2010 GOST 0
133 12248 Soils. Laboratory methods for determining the strength and strain characteristics 2010 GOST 0
134 R 52928 GLOBAL SATELLITE NAVIGATION SYSTEM Terms and definitions 2010 GOST 0
135 28560 FOOD PRODUCTS METHOD FOR DETECTION OF BACTERIA OF PROTEUS, MORGANELLA, PROVIDENCIA 2010 GOST 0
GENERA
136 15150 MACHINES, INSTRUMENTS AND OTHER INDDUSTRIAL PRODUCTS MODIFICATIONS FOR DIFFERENT 2010 GOST 0
CLIMATIC REGIONS. CATEGORIES, OPERATING, STORAGE AND TRANSPORTATION CONDITIONS AS TO
ENVIRONMENT CLIMATIC ASPECT INFLUENCE - Incorporating Amendment 1: 01/1978; Amendment 2:
137 R 54128 SUSPENSION SPRINGS FOR TRACTION ROLLING STOCK Microstructure Standards Scale 2010 GOST 0
138 9941 SEAMLESS COLD AND WARM-DEFORMED TUBES MADE FROM CORROSION-RESISTANT STEEL 2010 GOST 0
SPECIFICATIONS - Incorporating Amendments 1: 8/1983, Amendment 2: 6/1987, Amendment 3: 6/1988, Amendment 4:
8/1988; Amendment 5: 6/2001; Includes Corrigendum: 2011
139 R 53977 COMPRESSED AIR FOR PNEUMATIC SYSTEMS OF RAILWAY ROLLING STOCK Quality Requirements 2010 GOST 0
140 R 52821 Chocolate General specifications - Includes Corrigendum: 2010 2010 GOST 0
141 4728 AXLE BILLETS FOR RAILWAY VEHICLES Specifications 2010 GOST 0
142 398 ROUGH TYRES FOR RAILWAY ROLLING STOCK Specifications 2010 GOST 0
143 R 8.585 State system for ensuring the uniformity of measurements THERMOCOUPLES Nominal static characteristics of 2010 GOST 0
conversion
144 1510 CRUDE OIL AND OIL PRODUCTS Marking, packing, transportation and storage - Incorporating Amendment 1: 2010 GOST 0
08/1985; Amendment 2: 10/1986; Amendment 3: 06/1988; Amendment 4: 10/1989; Amendment 5: 01/1991
145 5915 HEXAGON NUTS OF ACCURACY CLASS B Design and dimensions - Incorporating Amendment 2: 2/1974; 2010 GOST 0
Amendment 3: 3/1981; Amendment 4: 6/1983; Amendment 5: 5/1985; Amendment 6: 3/1989 and Amendment 7: 7/1995
146 15.007 System of products development and launching into manufacture Products Of Light Industry Basic Provisions - 2010 GOST 0
Incorporating Amendment No.1: 3/1992
147 17187 SOUND LEVEL METERS Part 1 Technical requirements 2010 GOST 0
148 R 53295 FIRE RETARDANT AGENTS FOR STEEL STRUCTURES General requirements. Test method for fire retardance 2009 GOST 0
efficiency
149 7524 GRINDING STEEL BALLS FOR BALL MILLS SPECIFICATIONS - Incorporating Amendment 1: 12/1989 and 2009 GOST 0
Amendment 2: 8/1992
150 18995.2 LIQUID CHEMICAL PRODUCTS Method for refractive index determination - Incorporating Amendment 1: 07/1980 2009 GOST 0
151 R 50462 BASIC AND SAFETY PRINCIPLES FOR "MAN-MACHINE" INTERFACE, MARKING AND IDENTIFICATION. 2009 GOST 0
Identification of conductors by colors and alphanumerics
152 11118 AUTOCLAVED AERATED CONCRETE PANELS FOR EXTERNAL WALLS OF BUILDINGS Technical requirements 2009 GOST 0
153 R 53383 HOT-DEFORMED SEAMLESS STEEL PIPES Specifications 2009 GOST 0
154 22756 POWER AND VOLTAGE TRANSFORMERS AND REACTORS Test methods for electric insulation strength - 2009 GOST 0
Incorporating Amendment 1: 3/1982, Amendment 2: 10/1984, Amendment 3: 3/1986 and Amendment 4: 7/1992
155 14637 ROLLED PLATES OF ORDINARY QUALITY CARBON STEEL SPECIFICATIONS - Incorporating Amendment 1: 2009 GOST 0
12/1990; Incorporating Corrigendum : 2004
156 R 53561 Pipeline Fittings GASKETS OF OVAL AND OCTAGONAL CROSS-SECTION AND LENS STEEL GASKETS FOR 2009 GOST 0
VALVE FLANGES Design, Dimensions and General Technical Requirements - Includes Corrigendum: 2011 and
Corrigendum: 2012
157 R 12.1.019 Occupational Safety Standards System ELECTRICAL SAFETY General requirements and nomenclature of protection 2009 GOST 0
types
158 R 52554 WHEAT Specifications - Includes Corrigendum: 2011 2009 GOST 0
159 18995.1 LIQUID CHEMICAL PRODUCTS Methods for density determination - Incorporating Amendment 1: 07/1980 and 2009 GOST 0
Amendment 2: 03/1988
160 R 53489 Occupational Safety Standards System MOUNTED AND TRAILED AGRICULTURAL MACHINERY General Safety 2009 GOST 0
Requirements
161 R 51105 FUELS FOR COMBUSTION ENGINES. UNLEADED GASOLINE SPECIFICATIONS - Incorporating Amendment 1: 2009 GOST 0
7/1999; Amendment 2: 4/2000; Amendment 3: 3/2004; Amendment 4: 12/2004; Amendment 5: 12/2010; Amendment 6:
2011
162 18855 ROLLING BEARINGS DYNAMIC LOAD RATINGS AND RATING LIFE (DURABILITY) - Includes Corrigendum: 2009 GOST 0
2010
163 R 8.563 State System for Ensuring the Uniformity of Measurements MEASUREMENT TECHNIQUES (METHODS) 2009 GOST 0
164 R 53315 CABLE PRODUCTS REQUIREMENTS OF FIRE SAFETY - Incorporating Amendment 1: 2011 2009 GOST 0
165 R 51866 Motor Fuels UNLEADED GASOLINE Specifications - Incorporating Amendment 1: 11/2006 and Amendment 2: 09/2008; 2009 GOST 0
Corrigendum 2007 and 2009; Includes Amendment 3: 2010 and Amendment 4: 2011
166 7751 AGRICULTURAL MACHINERY Regulations for Storage 2009 GOST 0
167 7702.2.7 POULTRY MEAT, EDIBLE, OFFAL READY-TO-COOK POULTRY PRODUCTS Methods of Proteus Bacteria 2009 GOST 0
Detection
168 24.302 SYSTEM OF ENGINEERING DOCUMENTS FOR AUTOMATED CONTROL SYSTEMS GENERAL 2009 GOST 0
REQUIREMENTS FOR MAKING DIAGRAMS - Incorporates Amendment 1: 01/1982; Amendment 2: 08/1985;
Amendment 3: 11/1987
169 24507 NON-DESTRUCTIVE TESTING. FORGINGS MADE FROM FERROUS AND NON-FERROUS METALS 2009 GOST 0
ULTRASONIC METHODS OF DEFECTOSCOPY - Incorporating Amendment 1: 05/1986
170 R 53259 FIRE ENGINEERING. ISOLATION COMPRESSED-AIR ESCAPE HOODS PROTECTING PEOPLE FROM TOXIC 2009 GOST 0
COMBUSTION IN THE PROCESS OF THEIR EVACUATION FROM SMOKE-FILLED COMPARTMENTS DURING
A FIRE General technical requirements. Test methods
171 R 53638 RECIPROCATING INTERNAL COMBUSTION ENGINES General Specifications 2009 GOST 0
172 17380 Carbon and low-allow steel butt-welding fittings GENERAL SPECIFICATIONS - Incorporating Amendment 1: 04/2007 2009 GOST 0
173 5264 MANUAL ARC WELDING. WELDED JOINTS Basic Types, Design Elements and Dimensions - Incorporating 2009 GOST 0
Amendment 1: 1/1989; Includes Corrigendum: 2009
174 R 52201 ETHANOL MOTOR FUEL FOR AUTOMOTIVE FORCED-IGNITION ENGINES. BENZANOLS General Technical 2009 GOST 0
Requirements
175 R 53671 Pipeline valves SWING AND LIFT CHECK VALVES General specifications 2009 GOST 0
176 4784 ALUMINUM AND WROUGHT ALUMINUM ALLOYS Grades - Incorporating Amendment 1: 11/2003; Incorporating 2009 GOST 0
Corrigendum: 2005
177 10585 OIL FUEL. MAZUT SPECIFICATIONS - Incorporating Amendment 1: 09/2008; Incorporating Corrigendum: 2009; 2009 GOST 0
Amendment 2: 2010
178 18180 PETROLEUM BITUMENS TEST METHOD FOR MASS VARIATION AFTER HEATING - Incorporates Amendment 2009 GOST 0
1: 12/1978; Amendment 2: 02/1983; Amendment 3: 03/1985
179 R 53309 BUILDINGS AND BUILDING FRAGMENTS METHOD OF FULL-SCALE TEST FOR FIRE-RESISTANCE General 2009 GOST 0
requirements
180 R 53682 HEATING UNITS FOR OIL REFINERIES General technical requirements 2009 GOST 0
181 27518 PRODUCTS DIAGNOSIS General requirements 2009 GOST 0
182 R 52459.3 ELECTROMAGNETIC COMPATIBILITY OF TECHNICAL EQUIPMENT RADIO COMMUNICATION 2009 GOST 0
EQUIPMENT PART 3 SPECIFIC REQUIREMENTS FOR SHORT-RANGE DEVICES OPERATING AT
FREQUENCIES BETWEEN 9 KHZ AND 40 GHZ
183 4543 ALLOYED CONSTRUCTION STEEL SPECIFICATIONS - Incorporating Amendment 1: 3/1977; Amendment 2: 7/1982; 2008 GOST 0
Amendment 3: 2/1987; Amendment 4: 6/1987; Amendment 5: 12/14/1989
184 12337 MOTOR OILS FOR DIESEL ENGINES Specifications - Incorporating Amendment 1: 01/1986, Amendment 2: 01/1988, 2008 GOST 0
Amendment 3: 10/1989, Amendment 4: 08/1991, Amendment 5: 8/1995, Amendment 6: 01/2001
185 31365 PAINT COATINGS FOR ELECTRIC (DIESEL) LOCOMOTIVES OF 1520-mm-GAUGE MAINLINE RAILWAYS 2008 GOST 0
Specifications - Includes Amendment: 2009
186 R 52700 LOW-ALCOHOL BEVERAGES General specifications - Incorporates Correction: 2008 2008 GOST 0
187 8.217 State System for Ensuring the Uniformity of Measurements CURRENT TRANSFORMERS Verification Technique 2008 GOST 0
188 R 52719 POWER TRANSFORMERS General Specifications 2008 GOST 0
189 380 COMMON QUALITY CARBON STEEL GRADES - Incorporating Corrigendum: 2008 2008 GOST 0
190 27772 ROLLED METAL FOR STEEL BUILDING STRUCTURES GENERAL SPECIFICATIONS - Incorporating Amendment 2008 GOST 0
1: 6/1989
191 31369 Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition 2008 GOST 0
192 17.4.4.02 NATURE PROTECTION SOILS SAMPLING AND PREPARATION METHODS FOR CHEMICAL, 2008 GOST 0
BACTERIOLOGICAL AND HELMINTHOLOGICAL ANALYSES
193 30513 ABRASIVE AND DIAMOND TOOLS Test methods for safety 2008 GOST 0
194 R 52927 ROLLED STOCK MADE OF NORMAL, INCREASED AND HIGH STRENGTH STEEL FOR SHIPBUILDING 2008 GOST 0
Specifications
195 R 52606 TRAFFIC CONTROL DEVICES CLASSIFICATION OF ROADSIDE BARRIERS 2008 GOST 0
196 R 53076 RAILWAY TRANSPORT Strength Requirements for Railway Vehicle Bodies 2008 GOST 0
197 3956 COMMERCIAL SILICA GEL SPECIFICATIONS - Incorporating Amendment 1: 05/1981; Amendment 2: 04/1986; 2008 GOST 0
Amendment 3: 09/1990
198 2208 BRASS FOIL, TAPES, SHEETS AND PLATES SPECIFICATIONS 2008 GOST 0
199 17.4.3.02 NATURE PROTECTION SOILS REQUIREMENTS FOR FERTILE LAYER CONSERVATION IN PERFORMING 2008 GOST 0
EARTH-MOVING
200 2405 PRESSURE GAUGES, VACUUM GAUGES, PRESSURE-AND-VACUUM GAUGES, HEAD GAGES, DRAFT 2008 GOST 0
GAUGES AND DRAFT-AND-HEAD GAGES GENERAL SPECIFICATIONS
201 R 52746 TRACTOR TRAILERS AND SEMITRAILERS General technical requirements - Incorporating Amendment 1: October 2008 GOST 0
2010
202 19903 HOT-ROLLED STEEL SHEET PRODUCTS Assortment - Incorporating Amendment 1: 11/1979, Amendment 2: 9/1982, 2008 GOST 0
Amendment 3: 10/1983, Amendment 4: 7/1985, Amendment 5: 6/1986, Amendment 6: 9/1988
203 R 52054 Fresh cows milk - raw material. Specifications 2008 GOST 0
204 10007 POLYTETRAFLUOROETHYLENE SPECIFICATIONS - Incorporating Amendment 1: 4/1986 and Amendment 2: 2008 GOST 0
10/1990
205 25584 SOILS Laboratory Methods for Filtration Factor Determination - Incorporating Amendment 1: 4/1997 2008 GOST 0
206 R 51000.4 GENERAL REQUIREMENTS FOR TEST LABORATORY ACCREDITATION 2008 GOST 0
207 R 52350.15 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES Part 15 Construction, tests and marking of type 2008 GOST 0
of protection â__nâ__ electrical apparatus
208 31371.7 Natural gas Determination of gas composition using gas-chromatography method and evaluation of uncertainty Part 7 2008 GOST 0
Measurement procedure for mole fractions of gas components
209 6032 CORROSION-RESISTANT STEELS AND ALLOYS Test methods for intergranular corrosion resistance 2008 GOST 0
210 R 52726 DISCONNECTORS AND EARTHING SWITCHES FOR AC VOLTAGE ABOVE 1 kV AND THEIR DRIVE UNITS 2008 GOST 0
General Specifications - Includes Amendment 1: 2008
211 R 51272 CIDERS General specifications 2008 GOST 0
212 31370 Natural gas. Sampling guidelines 2008 GOST 0
213 R 52627 BOLTS, SCREWS AND STUDS Mechanical properties and test methods 2008 GOST 0
214 27026 REAGENTS Determination of non-volatile residue - Incorporating Amendment 1: 3/1990 2008 GOST 0
215 6581 FLUID ELECTRICAL INSULATING MATERIALS Electric test methods - Incorporating Amendment 1: 02/1982; 2008 GOST 0
Amendment 2: 10/1984; Amendment 3: 06/1987
216 9467 METAL COVERED ELECTRODES FOR MANUAL ARC WELDING OF STRUCTURAL AND THERMOSTABLE 2008 GOST 0
STEELS TYPES - Incorporating Amendment 1: 8/1988
217 R 6.30 UNIFIED DOCUMENTATION SYSTEMS UNIFIED SYSTEM OF MANAGERIAL DOCUMENTATION 2008 GOST 0
REQUIREMENTS FOR DOCUMENTS PRESENTATION
218 R 53174 ELECTRIC GENERATING PLANTS WITH DIESEL AND GAS INTERNAL COMBUSTION ENGINES General 2008 GOST 0
specifications
219 R 52720 PIPELINE VALVES Terms and Condition 2008 GOST 0
220 26165 CHILDRENS SHOES General specifications 2008 GOST 0
221 12571 SUGAR Method for sucrose determination 2008 GOST 0
222 R 51317.3.5 Electromagnetic Compatibility (EMC) LIMITATION OF VOLTAGE FLUCTUATIONS AND FLICKER, CAUSED BY 2008 GOST 0
TECHNICAL DEVICES (WITH RATED INPUT CURRENT EXCEEDING 16 A) CONNECTED TO LOW-VOLTAGE
POWER SUPPLY SYSTEMS Norms and Test Methods
223 R 53241 MARINE GEOLOGICAL EXPLORATION Requirements for protection of marine environment during exploration and 2008 GOST 0
development of oil-gas fields in continental shelf, territorial sea and littoral zone
224 23216 ELECTROTECHNICAL PRODUCTS STORAGE, TRANSPORTATION, TEMPORARY CORROSION PROTECTION, 2008 GOST 0
AND PACKING. GENERAL REQUIREMENTS AND TEST METHODS - Incorporating Amendment 1: 09/1983;
Amendment 2: 06/1988; Amendment 3: 10/1997
225 R 8.596 State System for Guaranteeing the Uniformity of Measurements METROLOGICAL ASSURANCE OF MEASURING 2008 GOST 0
SYSTEMS Basic Provisions
226 5761 VALVES FOR NOMINAL PRESSURE AT MOST PN 250 General Specifications - Includes Corrigendum: 2011 2008 GOST 0
227 9463 Round Lumber Of Coniferous Species Specifications - Incorporating Amendment 1: 3/1990 2008 GOST 0
228 11507 PETROLEUM BITUMEN TEST METHOD FOR FRAAS BRITTLE POINT - Incorporating Amendment 1: 12/1983; 2008 GOST 0
Amendment 2: 5/1986; Amendment 3: 10/1995
229 R 53077 RAIL TRANSPORT Rules of designing and testing the bogie frame structure 2008 GOST 0
230 24258 SCAFFOLDING EQUIPMENT General Specifications 2008 GOST 0
231 R 53176 ELECTRIC GENERATING PLANTS WITH GASOLINE, DIESEL AND GAS INTERNAL COMBUSTION ENGINES 2008 GOST 0
Reliability indices. Requirements and test methods
232 R 52738 MILK AND MILK PROCESSING PRODUCTS Terms and Definitions 2008 GOST 0
233 15846 PRODUCTS DELIVERED TO THE REGIONS OF THE FAR NORTH AND THOSE CATEGORIZED AS SUCH 2008 GOST 0
REMOTE AREAS Packing, Marking, Transportation and Storage
234 R 52988 Noise of Machines Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Measurement of 2008 GOST 0
Airborne Noise by the Enveloping Surface Method
235 10577 OIL PRODUCTS Method for determination of mechanical impurity content - Incorporating Amendment 1: 04/1983; 2008 GOST 0
Amendment 2: 06/1987 and Amendment 3: 12/1991
236 535 COMMERCIAL QUALITY CARBON-STEEL BARS AND SHAPED SECTIONS General specifications - Includes 2008 GOST 0
Corrigendum: 2008
237 R 52791 Canned milk. Dry milk. Specifications 2008 GOST 0
238 R 52230 VEHICLE ELECTRIC EQUIPMENT General Specifications 2008 GOST 0
239 R 50953 HARMFUL SUBSTANCES AND OPACITY OF EXHAUST GASES EMITTED BY MAINLINE AND SHUNTING 2008 GOST 0
DIESEL LOCOMOTIVES Norms and Determination Methods
240 2246 WELDING STEEL WIRE Specifications - Incorporating Amendment 1: 03/1973; Amendment 2: 06/1978; Amendment 3: 2008 GOST 0
06/1980; Amendment 4: 02/1983; Amendment 5: 03/1987
241 R 51593 POTABLE WATER Sampling - Incorporating Amendment 1: 10/27/2010 2008 GOST 0
242 11505 PETROLEUM BITUMENS TEST METHOD FOR DUCTILITY - Incorporating Amendment 1: 12/1981; Amendment 2: 2008 GOST 0
3/1986
243 R 52954 Petroleum Products DETERMINATION OF THERMAL OXIDATION STABILITY OF GAS TURBINE FUELS. JFTOT 2008 GOST 0
METHOD
244 11506 PETROLEUM BITUMENS TEST METHOD FOR RING-AND-BALL SOFTENING POINT - Incorporates Amendment 2008 GOST 0
1: 10/1983; Amendment 2: 05/1987; Amendment 3: 12/2002
245 4233 REAGENTS FOR CHEMICAL ANALYSIS SODIUM CHLORIDE SPECIFICATIONS - Incorporating Amendment 1: 2008 GOST 0
2/1987; Incorporating Amendment 2: 5/1992
246 12026 LABORATORY FILTER PAPER SPECIFICATIONS - Incorporating Amendment 1: 6/1978; Amendment 2: 10/1981; 2008 GOST 0
Amendment 3: 6/1987 and Amendment 4
247 4333 PETROLEUM PRODUCTS Test methods for Open Cup Flash Point and Burning Point - Incorporates Amendment No. 1: 2008 GOST 0
12/1989
248 31251 FACADES OF BUILDINGS Fire hazard test method 2008 GOST 0
249 R 52776 ROTATING ELECTRICAL MACHINES Rating and performance 2007 GOST 0
250 5088 HINGES FOR WINDOWS AND DOORS Specifications 2007 GOST 0
251 R 52350.6 ELECTRICAL EQUIPMENT FOR EXPLOSIVE GAS ATMOSPHERES Part 6 Oil immersion ‫«آ‬o‫»آ‬ 2007 GOST 0
252 31349 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS 2007 GOST 0
MEASUREMENT AND EVALUATION OF MECHANICAL VIBRATIONS
253 R 41.36 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF LARGE PASSENGER VEHICLES WITH REGARD 2007 GOST 0
TO THEIR GENERAL CONSTRUCTION
254 R 51901.12 Risk management Procedure for failure mode and effects analysis 2007 GOST 0
255 9.602 Unified System of Corrosion and Ageing Protection UNDERGROUND CONSTRUCTIONS General Requirements for 2007 GOST 0
Corrosion Protection
256 R 52857.10 Vessels and apparatus NORMS AND METHODS OF STRENGTH CALCULATION Vessels and apparatus involving 2007 GOST 0
hydrogen sulphide media
257 2.113 Unified system for design documentation GROUP AND BASE DESIGN DOCUMENTS - Incorporating Amendment No. 2007 GOST 0
1: 12/1977; Amendment No. 2: 2/1980; Amendment No. 3: 11/1981; Amendment No. 4: 09/1985 and Amendment No. 5:
04/1986
258 R 52857.6 Vessels and apparatus NORMS AND METHODS OF STRENGTH CALCULATION Strength calculation under low- 2007 GOST 0
cyclic loads
259 R 51317.4.11 Electromagnetic Compatibility IMMUNITY TO VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE 2007 GOST 0
VARIATIONS OF POWER SUPPLY Requirements and Test Methods
260 R 52350.2 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES Part 2 Pressurized enclosures ‫»آ_ر«آ‬ 2007 GOST 0
261 2.312 Unified System of Design Documentation CONVENTIONAL REPRESENTATION AND DESIGNATION OF JOINT 2007 GOST 0
WELDS - Incorporating Amendment 1: 07/1991
262 R 52857.9 Vessels and apparatus NORMS AND METHODS OF STRENGTH CALCULATION Determination of stresses at nozzle- 2007 GOST 0
to-shell and nozzle-to-head junctions under pressure and external loads on nozzles
263 R 52857.4 Vessels and apparatus NORMS AND METHODS OF STRENGTH CALCULATION Strength and leak-tightness 2007 GOST 0
calculation of flange joints
264 R 52783 MILK FOR THE PRESCHOOL AND SCHOOL AGE CHILDRENâ__S FOOD Specifications 2007 GOST 0
265 R 52857.8 Vessels and apparatus NORMS AND METHODS OF STRENGTH CALCULATION Jacketed vessels and apparatus 2007 GOST 0
266 9012 Metals Method of Brinell Hardness Measurement - Incorporating Amendment 1: 6/63; Amendment 2: 7/79; Amendment 3: 2007 GOST 0
1/85; Amendment 4: 6/86; Amendment 5: 2/90 and Corrections: 2001 and 2003
267 R 52853 Motor cars WHEEL GUARDS Technical 2007 GOST 0
268 R 12.4.189 Occupational Safety Standards System PERSONAL RESPIRATORY PROTECTIVE DEVICES MASKS General 2007 GOST 0
specifications - Incorporating Amendment 1: 11/2001
269 2.501 Unified System of Design Documentation REGISTRATION AND STORAGE RULES - Incorporating Amendment 1: 2007 GOST 0
2/2006
270 28105 CASE FURNITURE AND TABLES Test methods for pullout drawers and tray-type drawers - Incorporates Amendment 1: 2007 GOST 0
06/2006
271 R 52482 WHITE SALT Sampling and samples preparation Determination of organoleptic indicators 2007 GOST 0
272 12.1.050 Occupational Safety Standards System METHODS OF NOISE MEASUREMENT AT WORKPLACES - Incorporating 2007 GOST 0
Amendment 1: 5/2005
273 2.610 Unified System for Design Documentation GUIDELINES FOR PREPARATION OF OPERATING DOCUMENTS - 2007 GOST 0
Includes Corrigendum: 2007
274 R 52725 SURGE ARRESTERS FOR A.C. ELECTRIC INSTALLATIONS FOR VOLTAGES FROM 3 kV TO 750 kV General 2007 GOST 0
Specifications - Incorporating Errata: 2008
275 R 52857.2 Vessels and apparatus Norms and methods of strength calculation Calculation of cylindrical and tapered shells, dished and 2007 GOST 0
flat heads and caps
276 R 52857.5 Vessels and apparatus NORMS AND METHODS OF STRENGTH CALCULATION Calculation of shells and heads from 2007 GOST 0
influence of support loads
277 R 52760 Pipe fittings REQUIREMENTS FOR MARKING AND FOR DISTINCTIVE COLORING 2007 GOST 0
278 R 52869 Pneumatic drives. Safety requirements 2007 GOST 0
279 31362 COMPRESSION-TYPE GASKETS FOR WINDOW AND DOOR UNITS Method for determination of resistance to 2007 GOST 0
effects during operation
280 R 52857.1 Vessels and apparatus NORMS AND METHODS OF STRENGTH CALCULATION General requirements 2007 GOST 0
281 17516.1 ELECTROTECHNICAL ARTICLES GENERAL REQUIREMENTS FOR STABILITY TO EFFECT OF 2007 GOST 0
ENVIRONMENTAL MECHANICAL FACTORS - Incorporating Amendment 1: 8/1998; Includes Amendment 2: 2013
282 2.102 Unified System of Design Documentation TYPES AND COMPLETE SET OF DESIGN DOCUMENTS - Incorporating 2007 GOST 0
Amendment 1: 08/1981; Amendment 2: 11/1981; Amendment 3: 03/1985; Amendment 4: 09/1985; Amendment 5:
10/1986; Amendment 6: 09/1987; Amendment 7: 07/1988 and
283 R 52161.2.24 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2.24 Particular requirements for 2007 GOST 0
refrigerating appliances, ice-cream appliances and ice-makers
284 9293 GASEOUS AND LIQUID NITROGEN SPECIFICATIONS - Incorporates Amendment 1: December 1979; Amendment 2: 2007 GOST 0
September 1985; Amendment 3: April 1991
285 2.104 Unified System of Design Documentation BASIC INSCRIPTIONS - Incorporates Corrigendum 2012 2007 GOST 0
286 R 52857.11 Vessels and apparatus NORMS AND METHODS OF STRENGTH CALCULATION Method of strength calculation for 2007 GOST 0
shells and heads with allowance for weld misalignments and for shell angularity and non-roundness
287 R 52628 NUTS Mechanical Properties and Test Methods 2007 GOST 0
288 8734 COLD-DEFORMED SEAMLESS STEEL TUBES RANGE - Incorporating Amendment 1: 08/1978; Amendment 2: 2007 GOST 0
11/1981 and Amendment 3: 3/1988
289 2.051 Unified System for Design Documentation ELECTRONIC DOCUMENTS General Provisions 2007 GOST 0
290 R 52857.7 Vessels and apparatus NORMS AND METHODS OF STRENGTH CALCULATION Heat-exchangers 2007 GOST 0
291 12.4.021 OCCUPATIONAL SAFETY STANDARDS SYSTEM VENTILATION SYSTEMS GENERAL REQUIREMENTS - 2007 GOST 0
Incorporating Amendment 1: 12/1987
292 27.003 Engineering Product Reliability CONTENTS AND GENERAL RULES FOR ESTABLISHMENT OF RELIABILITY 2007 GOST 0
REQUIREMENTS
293 9466 COATED METAL ELECTRODES FOR MANUAL ARC WELDING OF STEELS AND DEPOSITION 2007 GOST 0
CLASSIFICATION AND GENERAL SPECIFICATIONS - Incorporating Amendment 1: 12/1988 and Amendment 2:
06/1990; Includes Corrigendum: 2004
294 R 52857.3 Vessels and apparatus. Norms and methods of strength calculation. Reinforcement of openings in shells and heads under 2007 GOST 0
internal and external pressure. Strength calculation of shells and heads under external static loads on the nozzle
295 21.404 SYSTEM OF DESIGN DOCUMENTATION FOR CONSTRUCTION ENGINEERING PROCEDURE AUTOMATION 2007 GOST 0
INSTRUMENTATION SYMBOLS FOR USE IN DIAGRAMS
296 10581 GARMENTS Marking, packing, transportation and storage - Incorporating Amendment 1: 04/2002 2006 GOST 0
297 R 52607 Traffic Control Devices ROADSIDE SAFETY BARRIERS General Technical Requirements 2006 GOST 0
298 7502 MEASURING METAL TAPES Specifications 2006 GOST 0
299 R 52545.1 Rolling bearings MEASURING METHODS FOR VIBRATION Part 1 Fundamentals - Includes Corrigendum: 2006 2006 GOST 0
300 R 52617 GLASS CONTAINERS FOR MILK AND MILK PRODUCTS Specifications 2006 GOST 0
301 17375 CARBON AND LOW-ALLOYED STEEL SEAMLESS WELDED FITTINGS SHARPLY CURVED BENDS OF TYPE 2006 GOST 0
3D (R â__ 1.5 DN) Design - Incorporated Amendment 1: 2001
302 492 PRESSURE-TREATED NICKEL AND NICKEL AND COPPER-NICKEL ALLOYS Grades 2006 GOST 0
303 4835 CAR WHEELSETS OF 1520 mm GAUGE MAINLINE RAILWAYS Specifications - Incorporating Corrigendum: 2008 2006 GOST 0
304 R 52687 SOUR-MILK PRODUCTS ENRICHED BY BIFIDUM BIFIDOBACTERIA Specifications 2006 GOST 0
305 27006 CONCRETE BATCHING RULES 2006 GOST 0
306 2591 HOT-ROLLED SQUARE STEEL BARS Assortment 2006 GOST 0
307 356 Pipeline Fittings and Parts NOMINAL, TRIAL AND OPERATING PRESSURES Series 2006 GOST 0
308 10450 DIMINISHED WASHERS OF CLASSES ACCURACY A and C Specifications - Incorporating Amendment 1: 11/1983; 2006 GOST 0
Amendment 2: 03/1988
309 ISO 10816-1 Mechanical vibration EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING 2006 GOST 0
PARTS. Part 1. General guidelines
310 R 52290 Traffic control devices TRAFFIC SIGNS General technical requirements - Includes Amendment 1: 2011 and Corrigendum: 2006 GOST 0
2011
311 R 52568 STEEL PIPES WITH PROTECTIVE OUTER COATINGS FOR MAIN GAS AND OIL PIPELINES Specifications 2006 GOST 0
312 R 51141 RECORDS MANAGEMENT AND ORGANIZATION OF ARCHIVES Terms and Definitions 2006 GOST 0
313 31320 Vibration METHODS AND CRITERIA FOR THE MECHANICAL BALANCING OF FLEXIBLE ROTORS 2006 GOST 0
314 13.1.002 Reprography. Micrography DOCUMENTS TO BE MICROFILMED General requirements and norms 2006 GOST 0
315 R 52350.18 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES Part 18: Construction, tests and marking of type 2006 GOST 0
of protection encapsulation "m" electrical apparatus
316 13905 Glass containers TEST METHOD FOR WATER RESISTANCE OF INNER SURFACE 2006 GOST 0
317 11508 PETROLEUM BITUMENS TEST METHODS FOR BITUMEN ADHESION TO MARBLE AND SAND - Incorporates 2006 GOST 0
Amendment 1: 07/1979; Amendment 2: 01/1984
318 17376 CARBON AND LOW-ALLOYED STEEL SEAMLESS WELDED FITTINGS TEES Design - Incorporating Amendment 2006 GOST 0
1: 2001
319 2789 SURFACE ROUGHNESS PARAMETERS AND CHARACTERISTICS - Incorporting Amendment 1: 05/1980 2006 GOST 0
320 9.402 Unified system of protection against corrosion and ageing PAINTWORK COATINGS Preparation of metal surfaces for 2006 GOST 0
painting
321 6994 LIGHT OIL PRODUCTS TEST METHOD FOR AROMATIC HYDROCARBONS - Incorporating Amendment 1: 2006 GOST 0
08/1980; Amendment 2: 12/1984; Amendment 3: 07/1987
322 R 51317.3.4 Electromagnetic Compatibility (EMC) LIMITATION OF EMISSION OF HARMONIC CURRENTS USING 2006 GOST 0
TECHNICAL DEVICES (WITH RATED INPUT CURRENT EXCEEDING 16 A) CONNECTED TO LOW-VOLTAGE
POWER SUPPLY SYSTEMS Norms and Test Methods
323 R 52379 Good clinical practice (GCP) 2006 GOST 0
324 R 52051 AUTOMOTIVE VEHICLES AND TRAILERS Classification 2006 GOST 0
325 R 52533 EDIBLE POPPY-SEED Specifications 2006 GOST 0
326 23660 SYSTEM OF MACHINERY MAINTENANCE AND REPAIR Repairability Assurance when Developing Products 2006 GOST 0
327 R 12.4.191 Occupational Safety Standards System INDIVIDUAL RESPIRATORY PROTECTIVE EQUIPMENT. FILTERING 2006 GOST 0
HALF-MASKS FOR PROTECTION AGAINST AEROSOLS General Specifications
328 26.008 TYPE FOR INSCRIPTIONS APPLIED BY ENGRAVING METHOD EXECUTIVE DIMENSIONS - Incorporating 2006 GOST 0
Amendment 1: 06/1987; Amendment 2: 06/1989 and Amendment 3: 12/1991
329 17378 CARBON AND LOW-ALLOYED STEEL SEAMLESS WELDED FITTINGS REDUCERS Design - Incorporating 2006 GOST 0
Amendment 1: 2001
330 28193 NATURAL-CIRCULATION STATIONARY STEAM BOILERS WITH STEAM CAPACITY OF LESS THAN 4 2006 GOST 0
METRIC TONS/HOUR GENERAL TECHNICAL REQUIREMENTS
331 981 MINERAL OILS Method of Oxidation Stability Determination - Incorporating Amendment 1: 07/1978; Amendment 2: 2006 GOST 0
07/1981; Amendment 3: 09/1985; Amendment 4: 09/1990
332 R 52544 WELDABLE REINFORCING DIEROLLED SECTION BARS OF CLASSES A500C AND B500C FOR 2006 GOST 0
REINFORCEMENT OF FERROCONCRETE STRUCTURES Specifications
333 R 51318.22 Electromagnetic compatibility of technical equipment INFORMATION TECHNOLOGY EQUIPMENT. INDUSTRIAL 2006 GOST 0
RADIO DISTURBANCE Norms and methods of measurement
334 31323 Parameters of vibration characteristics of self-propelled machines Agricultural wheeled tractors and field machinery 2006 GOST 0
335 R 52527 GAS TURBINE PLANTS Reliability, Availability, Maintainability and Safety 2006 GOST 0
336 R 52350.5 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES Part 5 Powder filling ‫«آ‬q‫»آ‬ 2006 GOST 0
337 103 HOT-ROLLED STEEL STRIPS Assortment 2006 GOST 0
338 R 52565 ALTERNATING-CURRENT CIRCUITBREAKERS FOR VOLTAGE from 3 to 750 kV General Specifications 2006 GOST 0
339 16765 GENERAL-PURPOSE SELF-PROPELLED JIB CRANES ACCEPTANCE AND TEST METHODS 2006 GOST 0
340 12.1.045 OCCUPATIONAL SAFETY STANDARDS SYSTEM ELECTROSTATIC FIELDS PERMISSIBLE LEVELS AT 2006 GOST 0
WORKPLACES AND MONITORING PROCEDURE REQUIREMENTS
341 R 50696 DOMESTIC COOKING APPLIANCES BURNING GAS General Technical Requirements and Test Methods 2006 GOST 0
342 12.4.068 OCCUPATIONAL SAFETY STANDARDS SYSTEM DERMATOLOGICAL PERSONAL MEANS OF PROTECTION 2006 GOST 0
CLASSIFICATION AND GENERAL REQUIREMENTS - Incorporates Amendment 1: 12/1983
343 16519 Vibration EVALUATION OF VIBRATION EMMISSION PARAMETERS OF HAND-HELD AND HAND-GUIDED 2006 GOST 0
MACHINERY General requirements
344 28353.0 SILVER General requirements for methods of analysis 2006 GOST 0
345 R 41.43 UNIFORM PROVISIONS CONCERNING THE SAFETY GLAZING MATERIALS AND THEIR INSTALLATION ON 2005 GOST 0
VEHICLES
346 20419 CERAMIC ELECTROTECHNICAL MATERIALS CLASSIFICATION AND TECHNICAL REQUIREMENTS - 2005 GOST 0
Incorporating Amendment 1: 08/1985; Amendment 2: 09/1987; Amendment 3: 12/1988
347 23558 CRUSHED STONE SANDY GRAVEL MIXES AND SOILS TREATED WITH INORGANIC CEMENTING 2005 GOST 0
MATERIALS FOR ROAD AND AIRFIELD CONSTRUCTION Specifications - Incorporating Amendment 1: 02/1998;
Amendment 2: 12/2000
348 19853 PRESSURE LUBRICATORS SPECIFICATIONS - Incorporating Amendment 1: 05/1986; and Amendment 2: 02/1990 2005 GOST 0
349 8.586.2 State System for Guaranteeing the Uniformity of Measurements MEASUREMENT OF LIQUID-AND-GAS FLOWRATE 2005 GOST 0
AND OTHER QUANTITIES USING STANDARD FLOWCONTRACTING DEVICES Part 2 Orifice plates. Technical
requirements
350 28269 HIGH-POWER STATIONARY STEAM BOILERS General Technical Specifications - Incorporating Amendment 1: 2005 GOST 0
11/1990
351 13726 ALUMINUM AND ALUMINUM ALLOY STRIPS SPECIFICATIONS - Incorporates Amendment 1: 03/2004 2005 GOST 0
352 R 52456 Global navigation satellite system and global position system. Individual receiver equipment for automobile transport. 2005 GOST 0
Technical requirements
353 31296.1 Noise DESCRIPTION, MEASUREMENT AND ASSESSMENT OF ENVIRONMENTAL NOISE Part 1 Basic quantities 2005 GOST 0
and assessment procedures
354 21.203 DESIGN DOCUMENTATION SYSTEM FOR CONSTRUCTION REGISTRATION AND STORAGE RULES FOR 2005 GOST 0
THE ORIGINALS OF DESIGN DOCUMENTATION
355 R 52079 STEEL WELDED PIPES FOR TRUNK GAS PIPELINES, OIL PIPELINES AND OIL PRODUCTS PIPELINES 2005 GOST 0
Specifications
356 21345 BALL VALVES, PLUG VALVES AND CYLINDER VALVES FOR NOMINAL PRESSURE NOT EXCEEDING PN 2005 GOST 0
250 General Specifications - Includes Corrigendum: 2008 and Corrigendum: 2009
357 R 52350.1 Electrical apparatus for explosive gas atmospheres Part 1 FLAMEPROOF ENCLOSURES ‫«آ‬d‫»آ‬ 2005 GOST 0
358 8.586.1 State System for Guaranteeing the Uniformity of Measurements MEASUREMENT OF LIQUID-AND-GAS FLOWRATE 2005 GOST 0
AND OTHER QUANTITIES USING STANDARD FLOW-CONTRACTING DEVICES Part 1 Principle of measurement
method and the general requirements
359 8.586.5 State System for Guaranteeing the Uniformity of Measurements MEASUREMENTS OF LIQUID-AND-GAS 2005 GOST 0
FLOWRATE AND OTHER QUANTITIES USING STANDARD FLOWCONTRACTING DEVICES Part 5 Practice of
measurements
360 9698 GATE VALVES Key parameters 2005 GOST 0
361 30775 Resources Saving Waste Treatment WASTE CLASSIFICATION, IDENTIFICATION AND CODING Basic Provisions 2005 GOST 0
362 R 51136 PROTECTIVE LAMINATED GLASS General Specifications - Incorporates Amendment 1: 09/1998 2005 GOST 0
363 29322 STANDARD VOLTAGES 2005 GOST 0
364 7.89 System of standards on information, librarianship and publishing. Authors and publishers textual originals. General 2005 GOST 0
requirements
365 18482 EXTRUDED PIPES MADE OF ALUMINUM AND ALUMINUM ALLOYS SPECIFICATIONS - Incorporating 2005 GOST 0
Amendment 1: 3/1983; Amendment 2: 7/1984; Amendment 3: 6/1989; Includes Corrigendum: 2004
366 12893 SINGLE-SEATED, DOUBLE-SEATED AND CAGE CONTROL VALVES General specifications 2005 GOST 0
367 20448 Liquefied hydrocarbon fuel gases for domestic use. Specifications - Incorporates Amendment 1: 9/1997; Amendment 2: 2005 GOST 0
03/2004; Correction 7/2001
368 R 41.96 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF COMPRESSION IGNITION (C.I.) ENGINES TO BE 2005 GOST 0
INSTALLED IN AGRICULTURAL AND FORESTRY TRACTORS AND IN NON-ROAD MOBILE MACHINERY IN
REGARD TO THE EMISSION OF POLLUTANTS BY THE ENGINES
369 9702 PLUG AND BALL COCKS Key Parameters 2005 GOST 0
370 14870 Chemical products METHODS FOR WATER DETERMINATION - Incorporating Amendment 1: 05/1983 and 2005 GOST 0
Amendment 2: 06/1989
371 28473 PIG-IRON, STEEL, FERROALLOYS, METAL CHROMIUM AND MANGANESE GENERAL REQUIREMENTS FOR 2005 GOST 0
METHODS OF ANALYSIS
372 R 52435 INTRUDER ALARM FACILITIES Classification. General technical requirements and test methods 2005 GOST 0
373 R 61034-2 Measurement of Smoke Density of Cables Burning under Defined Conditions. Part 2 TEST PROCEDURE AND 2005 GOST 0
REQUIREMENTS
374 6996 Welded Joints METHODS OF MECHANICAL PROPERTIES DETERMINATION - Incorporating Amendment 1: 06/80; 2005 GOST 0
Amendment 2: 09/83; Amendment 3: 12/90; Amendment 4: 10/04
375 R 52108 Resource Saving WASTE TREATMENT Basic Provisions 2005 GOST 0
376 R 52437 Bank protection equipment DEPOSITARY AND PERSONAL SAFES General specifications 2005 GOST 0
377 2.105 Unified system for design documentation. General requirements for textual documents - Incorporates Corrigendum: 2005 GOST 0
12/2001
378 R 51250 Reciprocating Internal Combustion Engines EXHAUST SMOKE OPACITY Norms and Test Methods - Incorporating 2005 GOST 0
Amendment 1: 3/2004
379 22445 SWING CHECK GATES Key Parameters 2005 GOST 0
380 3706 GATE VALVES Face-to-face dimensions 2005 GOST 0
381 2991 NON-DEMOUNTABLE BOARD BOXES FOR CARGOES UP TO 500 kg GENERAL SPECIFICATIONS - Incorporates 2005 GOST 0
Amendment 1: 12/1987 and Amendment 2: 04/1991
382 11358 DIAL THICKNESS GAGES AND DIAL WALL THICKNESS GAGES GRADUATED TO 0.01 and 0.1 mm 2005 GOST 0
SPECIFICATIONS - Incorporating Amendment 1: 11/1990
383 28618 RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS 2005 GOST 0
SPECIFICATIONS
384 28338 Pipeline Connections and Fittings NOMINAL BORE (NOMINAL SIZE) Series - Incorporating Amendment 1: 5/1992 2005 GOST 0
385 R 52422 Trucks and trailers SPRAY-SUPPRESSION SYSTEMS Technical requirements and test methods 2005 GOST 0
386 28908 BALL COCKS AND DISK VALVES END-TO-END (FACE-TO-FACE) DIMENSIONS 2005 GOST 0
387 R 52368 DIESEL FUEL EURO Specifications - Includes Corrigendum: 2006 and Corrigendum: 2007; Incorporates Amendment 1: 2005 GOST 0
2011
388 R 50862 SAFES, STRONG-ROOMS AND SECURE STORAGE UNITS Burglary and Fire Proofness Requirements and Test 2005 GOST 0
Methods
389 R 51072 SAFETY DOORS General Technical Requirements and Tests Methods for Break-in and Bullet Resistance 2005 GOST 0
390 R 52350.11 ELECTRIC EQUIPMENT FOR EXPLOSIVE GAS ENVIRONMENTS Part 11 Equipment protection by intrinsic safety 2005 GOST 0
"i"
391 8.586.3 The State System for Guaranteeing the Uniformity of Measurements MEASUREMENT OF LIQUID-AND-GAS 2005 GOST 0
FLOWRATE AND OTHER QUANTITIES USING STANDARD FLOWCONTRACTING DEVICES Part 3 Nozzles and
Venturi nozzles. Technical requirements
392 R 52408 Reciprocating Internal Combustion Engines EXHAUST EMISSION Part 2 Measurement in operating conditions 2005 GOST 0
393 7566 METAL PRODUCTS Acceptance, Marking, Packing, Transportation and Storage - Incorporating Amendment 1: 4/2001 2005 GOST 0
394 8.586.4 The State System for Guaranteeing the Uniformity of Measurements MEASUREMENT OF LIQUID-AND-GAS 2005 GOST 0
FLOWRATE AND OTHER QUANTITIES USING STANDARD FLOW-CONTRACTING DEVICES Part 4 Venturi
tubes Technical requirements
395 28465 DRIVERâ__S CAB WINDSCREEN WIPERS OF TRACTION ROLLING STOCK General Specifications - Incorporating 2005 GOST 0
Amendment 1: 11/1996 and Amendment 2: 03/1999
396 9697 STOP VALVES KEY PARAMETERS 2005 GOST 0
397 17025 END MILLING CUTTERS WITH CYLINDRICAL SHANK DESIGN AND DIMENSIONS - Incorporating Amendment 2005 GOST 0
1: 1973, Amendment 2: 1977, Amendment 3: 1982, Amendment 4: 1985, Amendment 5: 1991, and Amendment 6: 1995
398 14777 MAN-MADE NOISE Terms and Definitions - Incorporating Amendment 1: 06/1980 2005 GOST 0
399 28679 STEAMâ__WATER PREâ__HEATERS FOR HEAT SUPPLY SYSTEMS GENERAL TECHNICAL SPECIFICATIONS 2005 GOST 0
400 R 52376 SPIRAL-WOUND HEAT-RESISTANT GASKETS TYPES, BASIC DIMENSIONS 2005 GOST 0
401 R 52350.7 Electrical Apparatus for Explosive Gas Atmospheres Part 7 INCREASED SAFETY â__‫ذ‬µâ__ 2005 GOST 0
402 R 51609 Medical Articles CLASSIFICATION IN ACCORDANCE WITH POTENTIAL RISK OF APPLICATION General 2005 GOST 0
Requirements
403 9544 Pipeline Gate Fittings GATE TIGHTNESS CLASSES AND NORMS - Includes Corrigendum: 2009 and Corrigendum: 2005 GOST 0
2011
404 R 8.595 State System of Guaranteeing the Uniformity of Measurements PETROLEUM AND PETROLEUM PRODUCTS MASS 2005 GOST 0
General Requirements for Measurement Techniques - Incorporating Amendment 1: 11/2009
405 16118 COMPRESSION (EXTENSION) CYLINDRICAL HELICAL SPRINGS MADE OF ROUND STEEL SPECIFICATIONS 2005 GOST 0
- Includes Amendment 1:05/1984
406 27243 Noise of machines DETERMINATION OF SOUND POWER LEVELS USING SOUND PRESSURE Comparison method 2005 GOST 0
in situ
407 3326 STOP VALVES, CHECK VALVES AND SWING CHECK GATES FACTORY LENGTHS 2005 GOST 0
408 R 51249 Reciprocating Internal Combustion Engines EMISSION OF NOXIOUS SUBSTANCES CONTAINING COMBUSTION 2005 GOST 0
GASES Norms and Methods of Determination - Incorporating Amendment 1: 03/2004
409 28969 STATIONARY STEAM LOW-CAPACITY TURBINES GENERAL SPECIFICATIONS 2004 GOST 0
410 9493 VESSELS AND APPARATUS SERIES OF CONDITIONAL (nominal) PRESSURES - Incorporating AMD 1: 06,1991 2004 GOST 0
411 10299 BUTTON-HEAD RIVETS OF ACCURACY CLASSES B and C - Amendment 1: 09/1983, Amendment 2: 04/1986 2004 GOST 0
412 9.301 UNIFIED SYSTEM OF CORROSION AND AGEING PROTECTION METAL AND NONMETAL INORGANIC 2004 GOST 0
COATINGS GENERAL REQUIREMENTS - Incorporates Amendments 1:03/1989 and Amendment 2:10/1989
413 3212 GATED PATTERNS Molding tapers, core prints and dimension tolerances 2004 GOST 0
414 R 52302 Motor Vehicles HANDLING AND STABILITY Technical Requirements Test Methods 2004 GOST 0
415 29102.2 Rubber condoms. Determination of width 2004 GOST 0
416 R 50034 Electromagnetic compatibility of technical equipment ASYNCHRONOUS MOTORS RATED FOR VOLTAGES OF UP 2004 GOST 0
TO 1000 V LIMITS AND TEST METHODS CONCERNING IMMUNITY TO ELECTROMAGNETIC
DISTURBANCES
417 29131 LIQUID CHEMICAL PRODUCTS Measurement of colour in Hazen units (platinum-cobalt scale) 2004 GOST 0
418 31193 Vibration. Testing of mobile machinery in order to determine the vibration emission value. General requirements 2004 GOST 0
419 29102.1 Rubber condoms. Determination of length 2004 GOST 0
420 R 52203 TUBING AND COUPLING Specifications 2004 GOST 0
421 10985 CASES, BOARDS, METAL BOXES ENCLOSURES, FRAMES BASIC DIMENSIONS - Incorporating Amendment 1: 2004 GOST 0
5/1989
422 28968 RUBBER HOSES DETERMINATION OF ABRASION RESISTANCE OF THE OUTER COVER 2004 GOST 0
423 12.1.012 Occupational Safety Standards System VIBRATION SAFETY General Requirements 2004 GOST 0
424 27300 INFORMATION-MEASURING SYSTEMS GENERAL REQUIREMENTS, COMPLETE SET AND RULES FOR 2004 GOST 0
DRAWING UP OPERATIONAL DOCUMENTATION - Incorporating Amendment 1: 10/1988
425 11068 ELECTRIC-WELDED PIPES MADE FROM CORROSION-RESISTANT STEEL SPECIFICATIONS - Incorporates 2004 GOST 0
Amendment 1: June 1987; Amendment 2: April 1999; Corrigendum: 2005
426 8233 STEEL MICROSTRUCTURE STANDARDS 2004 GOST 0
427 8733 COLD-DEFORMED AND WARM-WORKED SEAMLESS STEEL TUBES TECHNICAL REQUIREMENTS - 2004 GOST 0
Incorporating Amendment 1: 03/1976; Amendment 2: 02/1980; Amendment 3: 12/1985 and Amendment 4: 4/1992
428 27578 COMBUSTIBLE GASES Specifications - Incorporates Amendtment 1: February 2000; Correction 7/2001 2004 GOST 0
429 10511 AUTOMATIC ROTATION FREQUENCY CONTROL SYSTEMS (ARFCS) OF MARINE, LOCOMOTIVE AND 2004 GOST 0
INDUSTRIAL DIESEL ENGINES General Technical Requirements - Incorporating Amendment 1: 04/1986; Amendment
2: 07/1987; Amendment 3: 03/1989 and Amendment 4: 02/1999
430 1516.1 ELECTRICAL EQUIPMENT FOR AC VOLTAGES 3 TO 500 kV Requirements to electrical strength of insulation - 2004 GOST 0
Incorporating Amendment 1: 08/1978; Amendment 2: 08/1982; Amendment 3: 06/1986; Amendment 4: 09/1987;
Amendment 5: 10/1988; Amendment 6: 10/1989
431 R 52246 HOT-DIP ZINC-COATED STEEL SHEETS Specifications 2004 GOST 0
432 28751 ELECTRIC EQUIPMENT FOR MOTOR VEHICLES ELECTROMAGNETIC COMPATIBILITY. CONDUCTED 2004 GOST 0
INTERFERENCE IN SUPPLY CIRCUITS REQUIREMENTS AND TEST METHODS
433 22897 SEAMLESS COLD-DEFORMED PIPES MADE OF TITANIUM-BASE ALLOYS Specifications - Incorporating 2004 GOST 0
Amendment 1: 02/1993; Amendment 2: 04/2001
434 18365 SHEET CALIPER GAGES WITH SNAP JAWS FOR DIAMETERS over 100 to 360 mm Dimensions 2004 GOST 0
435 11928 SYSTEM OF EMERGENCY PREVENTION SIGNALING AND PROTECTION OF AUTOMATION DIESEL AND 2004 GOST 0
GASEOUS ENGINES GENERAL TECHNICAL SPECIFICATIONS - Incorporates Amendment 1: 07/1988
436 29102.3 Rubber condoms. Determination of colour fastness 2004 GOST 0
437 29157 ELECTROMAGNETIC COMPATIBILITY OF TECHNICAL EQUIPMENT ELECTRIC EQUIPMENT OF MOTOR 2004 GOST 0
VEHICLES. DISTURBANCES IN CONTROL AND SIGNAL LINES OF ONBOARD CIRCUITS REQUIREMENTS
AND TEST METHODS
438 26918 Noise methods for measuring noise of a railway rolling stock - Incorporates Amendment 1: 04,1991 2004 GOST 0
439 2.301 Unified system for design documentation. Formats - Incorporates Amendment 1: 12/1980 and Amendment 2: 03/1989 2004 GOST 0
440 16093 Basic Norms of Interchangeability METRIC SCREW THREADS Tolerances. Clearance Fits - Corrigendum: 2005; Same 2004 GOST 0
as ISO 965-1:1998 and ISO 965-3:1998
441 1284.2 V-BELTS OF STANDARD CROSS - SECTIONS SPECIFICATIONS - Incorporating Amendment 1: 12/1991; 2004 GOST 0
Amendment 2: 9/1999; Amendment 3: 7/2003
442 8020 CONCRETE AND REINFORCED CONCRETE STRUCTURES FOR MAN-HOLES OF SEWERAGE, WATER 2004 GOST 0
SUPPLY AND GAS SUPPLY PIPELINE SYSTEMS. Specifications
443 R 52264 DIVING PRESSURE CHAMBERS General Specifications 2004 GOST 0
444 29205 ELECTROMAGNETIC COMPATIBILITY OF TECHNICAL EQUIPMENT MAN-MADE RADIO-NOISE FROM 2004 GOST 0
ELECTRIC TRANSPORT NORMS AND TEST METHODS
445 R 52200 GAS TURBINES Standard reference conditions and ratings 2004 GOST 0
446 19677 AGRICULTURAL TRACTORS General Specifications - Incorporating Corrigendum: 1988, Amendment 1: August 1995 2004 GOST 0
and Amendment 2: September 2002
447 9.014 Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements - 2004 GOST 0
Incorporates Amendments 1: 3/1982; 2: 2/1985; 3: 9/1989, 4: 11/1991; 5: 11/1997
448 17.4.1.02 NATURE PROTECTION Soils Classification of Chemicals for Pollution Control 2004 GOST 0
449 12.4.009 Occupation Safety Standards System Fire-Fighting Equipment for Object Protection Basic Types Location and 2004 GOST 0
Maintenance - Incorporates Amendment 1: 6/1989
450 R 51672 METROLOGICAL ENSURING OF PRODUCT TESTING FOR THE PURPOSES OF CONFORMITY ASSURANCE 2004 GOST 0
Basic Provisions - Incorporates Corrigendum: 05/2003
451 2.302 Unified System of Design Documentation SCALES - Incorporates Amendment 1: 02/1980 and Amendment 2: 12/2000 2004 GOST 0
452 18968 CORROSION-RESISTANT AND HIGH TEMPERATURE STEEL RODS AND STRIPS FOR STEAM TURBINE 2004 GOST 0
BLADES SPECIFICATIONS - Incorporating Amendment 1: 03/1976; Amendment 2: 12/1978; Amendment 3: 01/1983;
Amendment 4: 06/1988 and Amendment 5: 06/1990
453 977 STEEL CASTINGS GENERAL SPECIFICATIONS 2004 GOST 0
454 15543.1 ELECTROTECHNICAL PRODUCTS GENERAL REQUIREMENTS FOR RESISTANCE TO AMBIENT CLIMATIC 2004 GOST 0
STRESSES
455 R 51206 Motor Vehicles POLLUTANT CONTENTS IN THE AIR OF PASSENGER COMPARTMENT AND DRIVERâ__S CAB 2004 GOST 0
Norms and Test Methods
456 19442 SHAPED BARS FOR BLADES AND BARS FOR BLADE COUPLING OF STEAM TURBINES MADE OF 2004 GOST 0
CORROSION- RESISTANT AND HIGH-TEMPERATURE STEEL Specifications - Incorporating Amendment 1:
10/1979; Amendment 2: 10/1984
457 12.4.011 OCCUPATIONAL SAFETY STANDARDS SYSTEM WORKERS PROTECTION MEANS GENERAL 2004 GOST 0
REQUIREMENTS AND CLASSIFICATION
458 29076 MARINE, LOCOMOTIVE AND INDUSTRIAL DIESEL ENGINES Requirements for fire protection 2004 GOST 0
459 14255 ELECTRIC APPARATUS FOR VOLATAGE TO 1000 V SHELLS. PROTECTION RATING - Incorporating 2004 GOST 0
Amendment 1: 12/1979 and Amendment 2: 09/1988
460 4401 STANDART ATMOSPHERE Parameters - Incorporating Amendment 1: 02/1987 2004 GOST 0
461 2.306 GRAPHIC DESIGNATIONS OF MATERIALS AND RULES OF THEIR REPRESENTATION - Incorporating 2004 GOST 0
Amendment 1: 08/1980, Amendment 2: 09/1987 and Amendment 3: 03/1989
462 10304 Rivets classes B and C. General specifications 2004 GOST 0
463 15527 PRESSURE-TREATED COPPER-ZINC ALLOYS (BRASSES) Grades - Incorporating Corrigendum: 2005 2004 GOST 0
464 R 51222 Bank protection equipment - Louvers - General specifications - Incorporating Amendment 1: 05/2002 and Amendment 2: 2003 GOST 0
10/2003
465 R 52146 COLD-ROLLED AND COLD-ROLLED HOT-GALVANIZED SHEET PRODUCTS WITH POLYMERIC COATING 2003 GOST 0
PRODUCED ON CONTINUOUS PROCESSING LINES Specifications
466 310.4 Cements METHODS FOR BENDING AND COMPRESSION STRENGTH DETERMINATION - Incorporating 2003 GOST 0
Amendment 1: 08/1984; Amendment 2: 05/1990
467 8479 STRUCTURAL CARBON AND ALLOY STEEL FORGINGS General Specifications - Incorporating Amendment 1: 2003 GOST 0
03/1977; Amendment 2: 12/1982 and Amendment 3: 06/1986
468 10551 FORMED CORRUGATED STEEL SECTIONS - Incorporating Amendment 1: 06/78, Amendment 2: 06/87, Amendment 2003 GOST 0
3: 07/89, Amendment 4: 10/90
469 R 50897 AUTOMATIC PLAYING MACHINES Safety Requirements and Test Methods - Incorporating Amendment 1: 02/2001 2003 GOST 0
470 11828 ROTATING ELECTRIC MACHINES GENERAL TEST METHODS - Amendment 1: 10/21/1993; Amendment 2: 2003 GOST 0
05/24/2001
471 11223 BROWN AND HARD COALS METHOD OF SAMPLING BY BOREHOLE DRILLING 2003 GOST 0
472 7463 Pneumatic tyres for tractors and agricultural machinery. Specifications 2003 GOST 0
473 R 52092 SOUR CREAM Specifications 2003 GOST 0
474 9389 CARBON STEEL SPRING WIRE SPECIFICATIONS - Incorporating Amendment 1: 2/1983; Amendment 2: 12/1984; 2003 GOST 0
Amendment 3: 12/1987; Amendment 4: 1/1990 and Amendment 5: 3/2002
475 R 52174 Biological safety RAW MATERIAL AND FOOD PRODUCTS Method for the identification of genetically modified 2003 GOST 0
organisms (GMO) of vegetable origin by using biological microchip
476 R 52177 FOOD FLAVORINGS General Specifications 2003 GOST 0
477 R 51221 Bank Protection Equipment TERMS AND DEFINITIONS - Incorporating Amendment 1: 10/2003 2003 GOST 0
478 12.2.007.8 Occupational safety standards system DEVICES FOR ELECTRIC WELDING AND PLASMA TREATMENT Safety 2003 GOST 0
requirements - Incorporating Amendment 1: 12/1980; Amendment 2: 5/1985
479 310.3 Cements METHODS FOR STANDARD CONSISTENCY, SETTING TIME AND SOUNDNESS DETERMINATION - 2003 GOST 0
Incorporating Amendment 1: 08/1984
480 R 51321.3 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES Part 3 Particular requirements for low-voltage 2003 GOST 0
switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use,
and test methods
481 18599 POLYETHYLENE PRESSURE PIPES Specifications - Incorporates Corrigendum: 2002 and Includes Amendment 1: 2006 2003 GOST 0
482 R 15.201 System of product development and launching into manufacture PRODUCTS OF INDUSTRIAL AND TECHNICAL 2003 GOST 0
ASSIGNMENT Procedure of product development and launching into manufacture
483 15.101 System of product developing and launching into manufacture Procedure of performing research work 2003 GOST 0
484 24484 INDUSTRIAL PURITY COMPRESSED AIR CONTAMINATION MEASUREMENT METHODS - Incorporating 2003 GOST 0
Amendment 1: 12/1985
485 31171 Noise of machines GUIDELINES FOR THE SELECTION OF METHOD FOR THE DETERMINATION OF EMISSION 2003 GOST 0
SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
486 6713 LOW-ALLOWED STRUCTURAL ROLLED STOCK FOR BRIDGE BUILDING TECHNICAL SPECIFICATIONS 2003 GOST 0
487 22233 ALUMINUM ALLOY EXTRUDED PROFILES FOR TRANSLUCENT ENCLOSURES Specifications - Incorporates 2003 GOST 0
Amendment 1: 5/2003
488 6139 SAND FOR CEMENT TESTING Specifications 2003 GOST 0
489 R 50941 PROTECTIVE BOOTH General Technical Requirements and Test Methods - Incorporates Amendment 1: 09/1998, 2003 GOST 0
Amendment 2: 05/2002, Amendment 3: 10/2003
490 R 52008 FOUR-WHEELED ALL-TERRAIN VEHICLES General Technical Requirements 2003 GOST 0
491 1643 Basic requirements for interchangeability CYLINDRICAL GEARINGS Tolerances 2003 GOST 0
492 R 51113 Bank protection equipment REQUIREMENTS FOR RESISTANCE TO BURGLARY AND TEST METHODS - 2003 GOST 0
Incorporating Amendment 1: 05/2002 and Amendment 2: 10/2003
493 R 52120 Technical diagnostics MAINLINE LOCOMOTIVES General requirements for diagnosing fitness 2003 GOST 0
494 11738 HEXAGON SOCKET HEAD CAP SCREWS OF ACCURACY CLASS A DESIGN AND DIMENSIONS - Incorporates 2003 GOST 0
Amendment 1: 03/1989
495 1451 HOISTING CRANES WIND LOAD NORMS AND METHOD OF DETERMINATION 2003 GOST 0
496 30245 ROLL-FORMED LOOP WELDED SQUARE AND RECTANGULAR STEEL SECTIONS FOR BUILDING 2003 GOST 0
STRUCTURES
497 310.2 Cements METHODS FOR FINENESS DETERMINATION - Incorporating Amendment 1: 08/1984 2003 GOST 0
498 R 52091 POTABLE CREAM Specifications 2003 GOST 0
499 30459 ADMIXTURES FOR CONCRETES AND MORTARS Methods of Efficiency Determination 2003 GOST 0
500 21.204 System of Project Documentation for Construction CONVENTIONAL GRAPHIC SYMBOLS AND 2003 GOST 0
REPRESENTATIONS OF GENERAL LAYOUT AND TRANSPORT CONSTRUCTION ELEMENTS
501 R 51112 Bank protection equipment BULLET-PROOFNESS REQUIREMENTS AND TEST METHODS - Amendment 1: 2003 GOST 0
09/1998; Amendment 2: 05/2002; Amendment 3: 10/2003
502 27652 MENS SUITS FOR PROTECTION AGAINST ACIDS SPECIFICATIONS 2003 GOST 0
503 12819 CAST STEEL FLANGES FOR pv from 1.6 to 20.0 MPa (from 16 to 200 kgf/cm2) - Incorporates Amendment 1:1988 and 2003 GOST 0
Amendment 2: 1992
504 17512 ELECTRIC EQUIPMENT AND INSTALLATIONS FOR 3 kV AND HIGHER Measurement Methods during High- 2003 GOST 0
Voltage Tests - Incorporating Amendment 1: 09/1987
505 8320.12 DIE-ROLLED SECTIONS PRODUCED BY CROSS ROLLING FOR AXLES OF NARROW GAUGE RAILWAY 2003 GOST 0
CARS Range
506 31167 BUILDINGS AND CONSTRUCTIONS Methods for determination of air permeability of walling under natural conditions 2003 GOST 0
507 R 52031 Passenger cars DEFROSTING AND DEMISTING SYSTEMS FOR GLAZED SURFACES Technical requirements Test 2003 GOST 0
methods
508 21646 COPPER AND BRASS PIPES FOR HEATEXCHANGE APPARATUS Specifications 2003 GOST 0
509 11761 FOOD PRODUCTS STANDARDS OF WEIGHING ACCURACY 2003 GOST 0
510 R 52050 AVIATION TURBINE FUEL JET A-1 Specifications 2003 GOST 0
511 R 52032 Passenger Cars WINDSCREEN WIPER AND WASHER SYSTEMS Technical Requirements Test methods 2003 GOST 0
512 12.2.007.14 Occupational Safety Standards System Cables And Cable Fittings Safety Requirements - Incorporating Amendment 1: 2003 GOST 0
8/1983; Amendment 2: 6/1987
513 12.2.007.10 Occupational Safety Standards System INDUCTION PLANTS, GENERATORS AND HEATERS FOR 2003 GOST 0
ELECTROTHERMICS, ULTRASONIC PLANTS AND GENERATORS Safety requirements
514 27005 Light-weight and cellular concretes. Rules of average density control 2003 GOST 0
515 7399 CONDUCTORS AND CORDS DESIGNED FOR RATED VOLTAGE UP TO 450/750 V Specifications - Incorporates 2003 GOST 0
Amendment 1: 03/2001, Errata: 2002, and Errata: 2003
516 1628 BRONZE BARS SPECIFICATIONS - Incorporating Amendment 1: 3/1983; Amendment 2: 4/1984; Amendment 3: 2003 GOST 0
5/1987; Amendment 4: 3/1989; Includes Corrigendum: 2000
517 10448 MARINE, LOCOMOTIVE AND INDUSTRIAL ENGINES Acceptance. Test methods - Incorporates Amendment 1: 2003 GOST 0
07/1983; Amendment 2: 12/1985; Amendment 3: 10/1988; Amendment 4: 02/1999; Amendment 5: 12/2005
518 R 51223 Bank Protection Equipment SLUICES FOR TRANSFER OF VALUABLES General Specifications - Incorporating 2003 GOST 0
Amendment 1: 10/2003
519 310.5 Cements METHOD OF DETERMINATION OF HEAT GENERATION 2003 GOST 0
520 27065 WATER QUALITY Terms and Definitions 2003 GOST 0
521 9965 PETROLEUM FOR PETROLEUM-REFINING PLANTS Specifications - Incorporating Amendment 1: 8/1988; 2003 GOST 0
Amendment 2: 12/1989
522 12.3.003 OCCUPATIONAL SAFETY STANDARDS SYSTEM ELECTRIC WELDING OPERATIONS SAFETY 2003 GOST 0
REQUIREMENTS - Incorporating Amendment 1: 05/1989
523 7352 GANTRY ELECTRIC CRANES Types 2003 GOST 0
524 14019 METALLIC MATERIALS Bending test method - same as ISO 5235 2003 GOST 0
525 25818 THERMAL PLANT FLY-ASHES FOR CONCRETE SPECIFICATIONS - Incorporating Amendment 1: 12/2000 2003 GOST 0
526 24211 ADMIXTURES FOR CONCRETES AND MORTARS General Specifications 2003 GOST 0
527 21519 WINDOW UNITS MADE OF ALUMINUM ALLOYS Specifications 2003 GOST 0
528 5520 SHEET CARBON LOW-ALLOYED AND ALLOYED STEEL FOR BOILERS OR VESSELS WORKING UNDER 2003 GOST 0
PRESSURE SPECIFICATIONS - Incorporating Amendment 1: 09/1982; Amendment 2: 05/1985; Amendment 3: 03/1990;
Amendment 4: 11/1997
529 R 52152 LONGWALL POWERED ROOF SUPPORTS Key Parameters General Technical Requirements Test Methods - 2003 GOST 0
Incorporated Corrigendum: 2004
530 20566 TEXTILE FABRICS AND PIECE GOODS Acceptance procedure and method of sampling - Incorporates Amendment 1: 2003 GOST 0
4/1981, Amendment 2: 11/1981, and Amendment 3: 12/1985
531 12.4.041 Occupational safety standards system. Fil tering respiratory protective equipment. General requirements 2003 GOST 0
532 310.6 Cements METHOD OF DEHYDRATION DETERMINATION 2003 GOST 0
533 R 51074 Food Products INFORMATION FOR CONSUMER General Requirements - Inorporates Corrigendum: 2007, 2003 GOST 0
Corrigendum: 2011 and Amendment 1: 2011
534 R 51224 Bank protection equipment DOORS AND HATCHES General specifications - Amendment 1: 05/2002; Amendment 2: 2003 GOST 0
10/2003
535 R 51110 Bank Protection Equipment GENERAL TECHNICAL REQUIREMENTS - Incorporates Amendment 1: 05/2002 and 2003 GOST 0
Amendment 2: 10/2003
536 12817 CAST FLANGES MADE FROM GREY IRON for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/cm2) Design and 2003 GOST 0
dimensions - Incorporating Amendments 1: 12/1987; Amendments 2: 04/1992
537 14231 Urea-formaldehyde resins Specifications 2003 GOST 0
538 11802 JET FUEL Test method for thermo-oxidative stability under static conditions - Incorpotating Amendment 1: 05/1996 and 2003 GOST 0
Amendment 2: 09/2002
539 20815 Rotating Electric Machines MECHANICAL VIBRATION OF CERTAIN MACHINES WITH ROTATION AXIS 2003 GOST 0
HEIGHTS OF 56 mm AND MORE Measurement, Evaluation and Allowable Values of Vibration
540 5616 HYDROTURBINE ELECTRICAL GENERATORS AND MOTOR-GENERATORS General Specifications - 2003 GOST 0
Incorporating Amendment 1: 07/2002
541 26633 Heavy-weight and fine concrete Specifications - Incorporating Amendment 1: 12/2001 2003 GOST 0
542 12816 FLANGES FOR FITTINGS, JOINING-PIECES AND PIPELINES FOR Pnom from 0.1 to 20 MPa (from 1 to 200 2003 GOST 0
kgf/cm2) General technical requirements - Incorporating Amendment 1: 3/1983; Amendment 2: 12/1987 and Amendment
3: 4/1992
543 2084 MOTOR PETROLS Specifications - Incorporating Amendment 1: 3/1981; Amendment 2: 4/1983; Amendment 3: 10/1984; 2003 GOST 0
Amendment 4: 6/1990; Amendment 5: 2/1997 and Amendment 6: 1/2002
544 12549 Passenger Cars for 1520 mm Gauge Main-line Railways - PAINTING - Specifications 2003 GOST 0
545 R 51111 Bank protection equipment ACCEPTANCE PROCEDURE AND TEST METHODS - Amendment 1: 05/2002; 2003 GOST 0
Amendment 2: 10/2003
546 12818 CAST FLANGES MADE FROM MALLEABLE CAST IRON FOR Pv from 1.6 to 4.0 MPa (from 16 to 40 kgf/cm2) 2003 GOST 0
Design and dimensions - Incorporates Amendment 1: 1988 and Amendment 2: 1992
547 3826 Wire Gauze Nets with Square Mesh Specifications - Incorporating Amendment 1: 09/1987; Amendment 2: 06/1988; 2003 GOST 0
Amendment 3: 09/2002; Includes Corrigendum: 2004
548 21563 HOT-WATER BOILERS MAIN PARAMETERS AND TECHNICAL REQUIREMENTS 2003 GOST 0
549 R 52102 PNEUMATIC TYRES Rolling Resistance Retardation Test - Includes Corrigendum: 2004 2003 GOST 0
550 R 51964 SPENT NUCLEAR FUEL PACKAGES Types and key parameters 2002 GOST 0
551 21924.0 REINFORCED CONCRETE SLABS FOR PAVEMENTS OF URBAN ROADS. Specifications 2002 GOST 0
552 6697 POWER-SUPPLY SYSTEMS, SOURCES, CONVERTERS AND AC USING EQUIPMENT Rated frequencies from 0.1 2002 GOST 0
to 10000 Hz and permissible deviations
553 R 41.4 UNIFORM PROVISIONS FOR THE APPROVAL OF DEVICES FOR THE ILLUMINATION OF REAR 2002 GOST 0
REGISTRATION PLATES OF MOTOR VEHICLES (EXCEPT FOR MOTOR CYCLES) AND THEIR TRAILERS -
Incorporates Corrigendum: 2000 and Amendment 1: October 2001
554 R 51202 POLYMER-BASED RESTORATIVE DENTAL MATERIALS TECHNICAL REQUIREMENTS. TEST METHODS - 2002 GOST 0
Incorporating Amendment 1: 6/2000
555 9617 TANKS AND APPARATUS SERIES OF DIAMETERS - Incorporates Amendment 1: 1983 and Amendment 2: 1987 2002 GOST 0
556 481 PARONITE AND PARONITE GASKETS SPECIFICATIONS - Incorporating Amendment 1: December 1982; 2002 GOST 0
Amendment 2: May 1985; Amendment 3: February 1988; Amendment 4: February 1990; Amendment 5: December 1991
557 809 TRACK SCREWS SPECIFICATIONS - Includes Amendments 1:04/1980, Amendment 2:02/1984, Amendment 2002 GOST 0
3:06/1990, Amendment 4:12/1991, and Amendment 5:03/1999
558 30456 Metal Products STEEL ROLLED SHEETS AND PIPES Impact Bend Test Methods - Incorporates Amendment 1: 09/2000 2002 GOST 0
559 18895 STEEL METHOD OF PHOTOELECTRIC SPECTRAL ANALYSIS 2002 GOST 0
560 8784 Paint materials Methods for determination of hiding power - Incorporating Amendment 1: 01/1981; Amendment 2: 05/1988 2002 GOST 0
561 R 51931 INDUSTRIAL CENTRIFUGES Safety requirements. Test methods 2002 GOST 0
562 5513 PNEUMATIC TYRES FOR TRUCKS, TRUCK-TRAILERS, BUSES AND TROLLEY BUSES SPECIFICATIONS - 2002 GOST 0
Includes Amendment: 2007
563 1414 STRUCTURAL STEEL OF IMPROVED AND HIGH MACHINABILITY. SPECIFICATIONS - Amendment 1:1981; 2002 GOST 0
Amendment 2:1986; Amendment 3:1989
564 15.309 System for development of products and launching into production - OUTPUT PRODUCTS TEST AND ACCEPTANCE - 2002 GOST 0
Basic Provisions
565 30852.10 Electrical apparatus for explosive gas atmospheres. Part 11. Intrinsic safety i 2002 GOST 0
566 12.2.026.0 WOODWORKING EQUIPMENT Safety Requirements for Construction - Incorporating Amendment 1: 06/2008 2002 GOST 0
567 30893.1 Basic norms of interchangeability GENERAL TOLERANCES Tolerances for linear and angular dimensions without 2002 GOST 0
individual tolerance indications - Incorporates Corrigendum: 2005
568 7822 PETROLEUM OILS Test Method for Dissolved Water - Incorporating Amendment 1: 03/1982; Amendment 2: 10/1984 2002 GOST 0
569 12.4.103 OCCUPATIONAL SAFETY STANDARDS SYSTEM SPECIAL PROTECTIVE CLOTHING, PERSONAL MEANS OF 2002 GOST 0
LEGS AND HANDS PROTECTION CLASSIFICATION
570 9587 BASIC STANDARDS FOR INTERCHANGEABILITY FINE-MODULE TOOTH GEARINGS (SERRATIONS) BASIC 2002 GOST 0
RACK - Incorporating Amendment 1: 10/1986
571 21.607 SYSTEM OF DESIGN DOCUMENTATION FOR CONSTRUCTION ELECTRIC ILLUMINATION FOR 2002 GOST 0
TERRITORIES OF INDUSTRIAL ENTERPRISES WORKING DRAWINGS
572 2.412 UNIFIED SYSTEM OF DESIGN DOCUMENTATION RULES FOR VARIOUS PRODUCTS DRAWINGS 2002 GOST 0
PERFORMANCE - Incorporates Amendment 1:10/1987
573 8.324 State System for Ensuring the Uniformity of Measurements GAS METERS Verification Methods 2002 GOST 0
574 R 51858 Crude petroleum. General specifications 2002 GOST 0
575 30893.2 Basic Norms of Interchangeability GENERAL TOLERANCES Geometrical and surface arrangement tolerances for 2002 GOST 0
features without individual tolerance indications - Incorporating Corrigendum: 2005
576 30247.3 BUILDING STRUCTURES Fire-resistance test methods. Lift shaft doors 2002 GOST 0
577 12247 LARGE-VOLUME SEAMLESS STEEL GAS CYLINDERS FOR OPERATING PRESSURE OF 31.4 and 39.2 MPa (320 2002 GOST 0
and 400 kgf/cm2) SPECIFICATIONS - Incorporating Amendment 1: February 1987; Amendment 2: June 1991;
Corrigendum: 2002
578 3481 AGRICULTURAL TRACTORS. TRAILER COUPLINGS Types, key parameters and dimensions - Incorporates 2002 GOST 0
Amendment 1: September 1981; Amendment 2: December 1986; Amendment 3: June 1990
579 12.2.085 Vessels Operating under Pressure SAFETY VALVES Safety Requirements 2002 GOST 0
580 21880 MINERAL-WOOL QUILT INSULATION SPECIFICATIONS - Incorporating Amendment 1: October 1996 2002 GOST 0
581 11969 FUSION WELDING BASIC POSITIONS AND THEIR DESIGNATIONS - Incorporating Amendment 1: 5/1982 2002 GOST 0
582 30735 HOT-WATER HEATING BOILERS WITH HEATING EFFICIENCY from 0.1 to 4.0 ‫_أ‬W General Technical 2002 GOST 0
Specifications
583 8.417 State System for Guaranteeing the Uniformity of Measurements UNITS OF QUANTITIES - Incorporating Corrigendum: 2002 GOST 0
2003
584 21073.2 NONFERROUS METALS Grain size determination by the grains counting method - Incorporating Amendment 1: 12/1983 2002 GOST 0
585 12.2.056 OCCUPATIONAL SAFETY STANDARDS SYSTEM - ELECTRIC AND DIESEL LOCOMOTIVES FOR 1520 mm 2002 GOST 0
GAUGE - SAFETY REQUIREMENTS - Incorporating Amendment 1: 07/1985, Amendment 2: 06/1988, Amendment 3:
09/2001
586 23787.8 SOLUTIONS OF WOOD PRESERVATIVE ‫_ذ_ذ‬-11 Technical requirements, safety requirements and methods of analysis 2002 GOST 0
- Incorporating Amendment 1: 06/1984
587 530 CERAMIC BRICKS AND STONES Specifications - Incorporating Amendment 1: 9/2001 2002 GOST 0
588 R 51881 Natural instant coffee. General specifications 2002 GOST 0
589 10178 PORTLAND CEMENT AND PORTLAND BLASTFURNACE SLAG CEMENT. SPECIFICATIONS - Incorproates 2002 GOST 0
Amendment 1: 04/1988 and Amendment 2: 11/1998
590 27.410 INSPECTION METHODS FOR RELIABILITY INDICES AND PLANS OF RELIABILITY CHECK TESTS 2002 GOST 0
591 R 51865 MACARONI FOODS General Specifications 2002 GOST 0
592 27653 MENâ__S SUITS FOR PROTECTION AGAINST MECHANICAL INFLUENCES, WATER AND ALKALIS 2002 GOST 0
SPECIFICATIONS
593 R 51907 Motor oil for machine diesels M-20G2SD. Specifications 2002 GOST 0
594 721 POWER SUPPLY SYSTEMS, ELECTRIC ENERGY NETWORKS, SOURCES, CONVERTERS AND RECEIVERS 2002 GOST 0
RATED VOLTAGE ABOVE 1000 V - Incorporating Amendment 1: 4/1979; Amendment 2: 12/1982; Amendment 3:
3/1989
595 5762 Pipeline Industrial Valves GATE VALVES FOR PN â_¤250 General Specifications - Incorporating Corrigendum: 2009 2002 GOST 0
596 8.578 State system for ensuring the uniformity of measurements STATE VERIFICATION SCHEDULE FOR INSTRUMENTS 2002 GOST 0
MEASURING THE CONTENT OF COMPONENTS IN GASEOUS MEDIA
597 31014 GLASS-FILLED POLYAMIDE SHAPES Specifications - Includes Corrigendum: 2004 2002 GOST 0
598 7358 STEEL-TEEMING LADLES Capacity range - Incorporating Amendment 1: 07/1980 and Amendment 2: 6/1989 2002 GOST 0
599 8.510 State System of Guaranteeing the Uniformity of Measurements STATE GAGING CIRCUIT FOR LIQUID FLOW-AND- 2002 GOST 0
MASS MEASUREMENT INSTRUMENTATION
600 1033 FATTY CUP GREASE Specifications - Incorporating Amendment 1: 12/1982; Amendment 2: 4/1984; Amendment 3: 2002 GOST 0
2/1990
601 3088 DOUBLE-LAY MULTISTRAND ROPE OF TYPE LC-R DESIGN 18‫·آ‬19 (1+6+6/6)+1 ‫_ذ‬.‫_ر‬. Gage - Incorporating 2002 GOST 0
Amendment 1: 11/1986 and Amendment 2: 11/1992
602 503 COLD-ROLLED STRIP MADE OF LOW-CARBON STEEL SPECIFICATIONS - Incorporates Amendments 1: 02/1983, 2002 GOST 0
Amendment 2: 06/1987, Amendment 3: 02/1989 and Amendment 4: 04/1992; Incorporated Corrigendums: 7/1983,
05/1989, 07/1992 and 04/1990
603 30852.0 Explosionproof electrical apparatus. Part 0. General requirements 2002 GOST 0
604 9454 METALS IMPACT BENDING TEST METHOD AT LOW, ROOM AND HIGH TEMPERATURES - Incorporating 2002 GOST 0
Amendment 1: 10/1981; Amendment 2: 03/1988; Includes Corrigendum: 2008
605 9.403 UNIFIED SYSTEM OF CORROSION AND AGEING PROTECTION PAINT COATINGS TEST METHODS FOR 2002 GOST 0
RESISTANCE TO LIQUID STATIC EFFECT - Incorporating Amendment 1: 10/1986
606 R 51893 PNEUMATIC TYRES General Technical Safety Requirements 2002 GOST 0
607 12.4.100 MANS OVERALLS FOR PROTECTION AGAINST NONTOXIC DUST, MECHANICAL EFFECTS AND GENERAL 2002 GOST 0
INDUSTRIAL CONTAMINATIONS SPECIFICATIONS - Incorporates Amendment 1: 08/1982, Amendment 2: 09/1986,
and Amendment 3: 12/1991
608 R 51980 Vehicles. Marking. General technical requirements 2002 GOST 0
609 21.611 System of Design Documentation for Construction CENTRALIZED POWER SUPPLY CONTROL Graphical and Letter 2002 GOST 0
Symbols of the Information Kind and Contents
610 592 SPROCKETS FOR LEAF CHAINS METHODS FOR TEETH PROFILE CALCULATION AND CONSTRUCTION 2002 GOST 0
MAXIMUM DEVIATIONS - Incorporates Amendment 1: 08/1986; Incorporated Corrigendum 11/1986
611 21204 INDUSTRIAL GAS BURNERS GENERAL TECHNICAL REQUIREMENTS 2002 GOST 0
612 22733 SOILS Laboratory Method for Determination of Maximum Density 2002 GOST 0
613 30558 METALLURGICAL ALUMINA - Incorporates Corrigendum: 2000 2002 GOST 0
614 R 51251 AIR FILTERS Classification. Marking 2002 GOST 0
615 25607 CRUSHED STONE-GRAVEL-SAND MIXES FOR ROADS, AIRFIELD SURFACES AND BASES. 2002 GOST 0
616 7442 GRANULAR STURGEON CAVIAR Specifications 2002 GOST 0
617 R 51945 ASPIRATORS General Specifications 2002 GOST 0
618 R 51920 AGRICULTURAL AND FORESTRY TRACTORS External noise. Norms and evaluation methods 2002 GOST 0
619 30852.3 Explosionproof electrical equipment. Part 2. Filling or purging of the pressurized enclosure ‫«آ‬p‫»آ‬ 2002 GOST 0
620 23941 Machine noise METHODS FOR DETERMINATION OF NOISE CHARACTERISTICS General requirements 2002 GOST 0
621 R 51355 VODKAS AND SPECIAL VODKAS General Specifications - Incorporating Amendment 1: 11/17/2005 and Corrigendum: 2002 GOST 0
2006
622 R 51883 CEMENTED RADIOACTIVE WASTE General Technical Requirements 2002 GOST 0
623 R 51906 THREAD CONNECTIONS FOR CASING, TUBING AND PIPE-LINES AND THREADED GAGES FOR THEM 2002 GOST 0
General technical requirements
624 30830 POWER TRANSFORMERS Part 1 General Provisions 2002 GOST 0
625 25546 HOISTING CRANES Operating conditions - Incorporating Amendment 1: 11/1991 2002 GOST 0
626 10446 WIRE TENSILE TEST METHOD - Incorporating Amendment 1: 1/1987; Amendment 2: 5/1990 2002 GOST 0
627 1577 PLATE AND BROAD STRIP ROLLED STOCK MADE OF QUALITY STRUCTURAL STEEL SPECIFICATIONS - 2002 GOST 0
Includes Corrigendum: 1999, Corrigendum: 2000 and Corrigendum: 2007
628 R 51043 Automatic Devices of Water and Foam Extinguishing SPRINKLERS General Technical Requirements. Test Methods 2002 GOST 0
629 30744 CEMENTS Test methods with use of polyfractional standard sand - Incorporating Corrigendum: 2003 2001 GOST 0
630 R 12.4.026 Occupational Safety Standards System. Safety Colours, Safety Signs and Signal Marking. Purpose and Application Rules. 2001 GOST 0
General Technical Requirements and characteristics. Test Methods
631 7746 CURRENT TRANSFORMERS General Specifications 2001 GOST 0
632 R 51057 Fire fighting equipment PORTABLE FIRE EXTINGUISHERS General technical requirements Test methods 2001 GOST 0
633 10617 Heating boilers of heating capacity from 0,10 to 3,15 MW. General specifications 2001 GOST 0
634 10677 REAR DRAFT HITCHES OF AGRICULTURAL TRACTORS OF CLASSES FROM 0.6 TO 8 Types, key parameters 2001 GOST 0
and dimensions
635 11069 Primary aluminum. Grades 2001 GOST 0
636 30720 Noise of machines. Determination of emission sound pressure levels at a work station and at other specified positions from 2001 GOST 0
the sound power level
637 21103 FUEL FOR JET ENGINES CHECK METHOD FOR SOAPS OF NAPHTHENIC ACIDS - Incorporates Amendment 1: 2001 GOST 0
12/1978 and Amendment 2: 04/1986; CMEA Standard 757-77
638 1320 TIN AND LEAD BABBITS SPECIFICATIONS - Same as ISO 4383-91; Incorporates Amendment 1: 10/1977, 2001 GOST 0
Amendment 2: 09/1979, Amendment 3: 06/1984, Amendment 4: 10/1985, Amendment 5: 09/1987, Amendment 6:
06/1989, and Amendment 7: 03/1998
639 19912 SOILS Field Test Methods by Static and Dynamic Sounding 2001 GOST 0
640 2.109 Unified System of Design Documentation BASIC REQUIREMENTS FOR DRAWINGS - Incorporates Amendment 1: 2001 GOST 0
2/1980, Amendment 2: 11/1981, Amendment 3: 5/1984, Amendment 4: 12/1984, Amendment 5: 3/1985, Amendment 6:
9/1985, Amendment 7: 3/1986, Amendment 8: 9/1987,
641 21153.2 ROCKS TEST METHODS FOR UNIAXIAL COMPRESSIVE STRENGTH - Incorporating Amendment 1: 11/1985; 2001 GOST 0
Amendment 2: 12/1990
642 1567 Petroleum products MOTOR GASOLINES AND AVIATION FUELS Determination of gum content by jet evaporation 2001 GOST 0
method
643 R 51742 TRANSMITTERS BROADCASTING STATIONARY WITH PEAK MODULATION OF RANGES LOW, AVERAGE 2001 GOST 0
AND HIGH FREQUENCIES Key parameters, technical requirements and methods of measurements
644 1173 Copper strips. Specifications - Incorporates Amendment 1: 05/2001 2001 GOST 0
645 30826 LAMINATED GLASS FOR BUILDING Specifications 2001 GOST 0
646 30691 Noise of machines. Declaration and verification of noise emission values 2001 GOST 0
647 12572 GRANULATED AND REFINED SUGAR COLOR TEST METHODS 2001 GOST 0
648 R 51317.4.2 Electromagnetic Compatibility ELECTROSTATIC DISCHARGE IMMUNITY Requirements and test methods 2001 GOST 0
649 30351 POLYAMIDES, POLYAMIDE FIBERS, FABRICS AND FILMS Determination of mass fraction of residual caprolactam 2001 GOST 0
and low-molecular compounds and their concentration of migration in water. Methods of liquid and gas-liquid
chromatography
650 2138 MOULDING SANDS GENERAL SPECIFICATIONS 2001 GOST 0
651 12345 Alloyed and high-alloyed steels. Methods of sulphur determination 2001 GOST 0
652 5542 NATURAL FUEL GASES FOR INDUSTRIAL AND DOMESTIC USE SPECIFICATIONS 2001 GOST 0
653 21488 PRESSED BARS MADE FROM ALUMINUM AND ALUMINUM ALLOYS 2001 GOST 0
654 R 51775 WHEELSETS FOR THE SPECIAL-PURPOSE ROLLING STOCK General specifications - Includes Amendment 1: 2010 2001 GOST 0
655 2.106 Unified system for design documentation. Textual documents 2001 GOST 0
656 R 51753 High Pressure Cylinders for Motor Vehicles with Compressed Natural Gas Used as Engine Fuel General specifications 2001 GOST 0
657 111 SHEET GLASS Specifications - Includes Corrigendum: 2003 2001 GOST 0
658 10706 METAL PIPES AND FITTINGS Part 3 Welded Pipes. Profile Pipes - Incorporating Amendment 1: 7/1980, Amendment 2: 2001 GOST 0
12/1985, Amendment 3: 11/1990, and Amendment 4: 4/1999
659 1983 VOLTAGE TRANSFORMERS General Specifications 2001 GOST 0
660 23274 Mobile Buildings ELECTRIC PLANTS General Specifications - Incorporating Amendment 1: 12/1989 2001 GOST 0
661 2.602 Unified System of Design Documentation REPAIR DOCUMENTS - Incorporating Amendment 1: 07/2000; Amendment 2: 2001 GOST 0
2006
662 R 51741 STATIONARY BROADCASTING VHF TRANSMITTERS Key parameters, technical requirements and methods of 2001 GOST 0
measurements
663 R 51757 THREE-PHASE INDUCTION MOTORS OF VOLTAGE OVER 1000 V FOR AUXILIARIES OF THERMAL POWER 2001 GOST 0
STATIONS General Specifications
664 1284.1 DRIVING V-BELTS OF STANDARD CROSS-SECTIONS BASIC DIMENSIONS AND INSPECTION METHODS - 2001 GOST 0
Incorporating Amendment 1: 12/1991
665 R 50948 MEANS OF DISPLAY OF THE INFORMATION OF INDIVIDUAL USE General ergonomic requirements and safety 2001 GOST 0
requirements
666 30774 Resource Saving Waste Treatment WASTE HAZARD CERTIFICATE Basic Requirements 2001 GOST 0
667 R 51847 HOUSEHOLD GAS FLOWING WATER HEATERS OF TYPES A and C General Specifications 2001 GOST 0
668 R 51759 HYDRODYNAMIC TRANSMISSIONS FOR RAILWAY ROLLING STOCK General Specifications 2001 GOST 0
669 12575 SUGAR Reducing Agents Determination Methods 2001 GOST 0
670 R 50577 STATE REGISTRATION PLATES OF ROAD VEHICLES Types and Main Dimensions Technical Requirements - 2001 GOST 0
Incorporates Amendment 1: 5/1998; Amendment 2: 11/2001
671 R 51795 CEMENTS Methods for the determination of contents of mineral additives - Incorporating Corrigendum: 2003 and 2001 GOST 0
Amendment: 2003
672 8736 Sand for construction works. Specifications 2001 GOST 0
673 19932 PETROLEUM PRODUCTS Determination of carbon residue by Conradson method 2001 GOST 0
674 22829 DRESSED FUR SKINS AND FUR-COAT SHEEPSKINS METHOD FOR DETERMINATION OF AQUEOUS 2001 GOST 0
EXTRACTION PH - Parcially Supersedes GOST 9213:1959; Incorporates Amendment 1: 12/1987
675 20700 BOLTS, STUDS, NUTS AND WASHERS FOR FLANGED AND ANCHOR JOINTS, PLUGS AND YOKES WITH A 2001 GOST 0
MEDIUM TEMPERATURE FROM 0 TO 650 ‫_آ‬C SPECIFICATIONS - Incorporates Amendments 1: 6/1980 and 2:
12/1985 and 3: 3/1987; Incorporates Corrigendums 4: 1986 and 6: 1987; CMEA
676 R 34.10 Information Technology CRYPTOGRAPHIC PROTECTION OF INFORMATION Processes of Formation and 2001 GOST 0
Verification of Electronic Digital Signature
677 R 50597 OPERATING CONDITION REQUIREMENTS FOR PROVIDING ROAD TRAFFIC SAFETY 2001 GOST 0
678 5066 ENGINE FUELS DETERMINATION OF CLOUD, CHILLING AND FREEZING POINTS 2001 GOST 0
679 859 Copper. Grades - Incorporating Corrigendum: 2002 2001 GOST 0
680 12434 LOW-VOLTAGE SWITCHING DEVICES GENERAL SPECIFICATIONS - Incorporating Amendment 1: 7/1987 2001 GOST 0
681 2.103 Uniform System of Design Documentation DEVELOPMENT STAGES - Incorporates Amendment 1: 07/1981 2001 GOST 0
682 18471 Video channel of broadcasting television Channel parts and measuring signals - Incorporates Amendment 1: 6/1976; 2001 GOST 0
Amendment 2: 6/1989
683 R 51834 ALUMINUM ALLOY EXTRUDED BARS OF HIGH STRENGTH AND IMPROVED DUCTILITY Specifications - 2001 GOST 0
Incorporating Amendment 1: 07/2005
684 26771 ELECTRIC MICROMOTORS USED FOR TOYS GENERAL SPECIFICATIONS - Incorporating Amendment 1: 1/1988 2001 GOST 0
685 546 Copper cathodes. Specifications 2001 GOST 0
686 1461 OIL AND OIL PRODUCTS METHOD FOR DETERMINATION OF ASH VALUE - Incorporates Amendment 1: 2001 GOST 0
12,1981; Amendment 2: 3/1984; Amendment 3: 9,1988; CMEA Standard 2171-80
687 30768 CONTROL HEAD OIL-FIELD EQUIPMENT Test methods 2001 GOST 0
688 R 51733 CENTRAL HEATING GAS-FIRED BOILERS OF NOMINAL HEAT POWER UP TO 70 kw WITH ATMOSPHERIC 2001 GOST 0
BURNERS Safety requirements and test methods - Contains parts of EN 297: 1994
689 R 51852 GAS TURBINE PLANTS Terms and definitions 2001 GOST 0
690 16019 EQUIPMENT FOR LAND MOBILE RADIO COMMUNICATION Requirements for mechanical and environmental 2001 GOST 0
resistance and test methods
691 9013 METALS Rockwell Hardness Test Method - Incorporating Amendment 1: 05/79; Amendment : 10/84; Amendment 3: 2001 GOST 0
05/89
692 R 51487 Vegetable Oils and Animal Fats METHOD OF PEROXIDE NUMBER DETERMINATION 2001 GOST 0
693 R 51652 Rectified ethyl alcohol made of food raw material. Specifications - Incorporates Corrigendum: 9/2001 2001 GOST 0
694 30773 Resources Saving Waste Treatment STAGES OF TECHNOLOGICAL CYCLE Basic Provisions 2001 GOST 0
695 R 51705.1 Quality Systems. FOODSTUFFS QUALITY MANAGEMENT ON THE BASIS OF HACCP PRINCIPLES General 2001 GOST 0
Requirements
696 R 41.11 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO DOOR LATCHES 2001 GOST 0
AND DOOR RETENTION COMPONENTS - UN ECE Regulation No. 11
697 30772 RESOURCE SAVING. WASTE TREATMENT Terms and Definitions 2001 GOST 0
698 3241 STEEL ROPES SPECIFICATIONS - Incorporates Amendment 1: 2001 and Amendment 2: 2007 2001 GOST 0
699 2.004 Unified system of design documentation GENERAL REQUIREMENTS FOR DESIGN AND TECHNOLOGICAL 2001 GOST 0
DOCUMENTATION PROCESSED USING PRINTING AND PLOTTING COMPUTER DEVICES - IN PLACE OF
GOST 2.004-79 and GOST 3.1124-86
700 R 51616 Vehicles INTERNAL NOISE Permissible levels and test methods 2000 GOST 0
701 2.702 Unified system for design documentation. Rules for presentation of electric schemes - Incorporates Amendment 1: 02/1980, 2000 GOST 0
Amendments 2: 08/1985, and Amendment 3: 07/1991
702 12071 Soils Sampling, packing, transportation and keeping of samples 2000 GOST 0
703 R 50839 Electromagnetic compatibility of technical equipment. Immunity of computer and informatic equipment to electromagnetic 2000 GOST 0
disturbances. Requirements and test methods
704 30668 ELECTRONIC EQUIPMENT PRODUCTS Marking - IN PLACE OF GOST 24385â__80 and GOST 25486â__82 2000 GOST 0
705 R 51558 SECURITY TELEVISION SYSTEMS General technical requirements and test methods 2000 GOST 0
706 12.2.030 Occupational Safety Standards System PORTABLE TOOLS NOISE CHARACTERISTICS Norms. Test Methods - 2000 GOST 0
Incorporating Amendment 1: 10/2005
707 17232 Aluminium and aluminium alloys plates. Specifications 2000 GOST 0
708 R 51697 HOUSEHOLD CHEMICAL PRODUCTS IN AEROSOL PACKAGE General specifications 2000 GOST 0
709 20689 STATIONARY STEAM TURBINES FOR COMPRESSOR AND BLOWER DRIVES TYPES, KEY PARAMETERS 2000 GOST 0
AND GENERAL TECHNICAL REQUIREMENTS - Incorporating Amendment 2: 1986; and Amendment 3: 1988
710 R 51698 VODKA AND ETHANOL Gas Chromatography Express-method for Determination of Toxic Microimpurity Content - 2000 GOST 0
Incorporating Amendment 1: 2005
711 R 50571.22 Electrical Installations of Buildings Part 7 REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS 2000 GOST 0
Section 707 Earthing requirements for the installation of data processing equipment
712 R 51690 PASSENGER CARS OF 1520 mm GAUGE MAINLINE RAILWAYS General Specifications - Incorporating Amendment 2000 GOST 0
1: 2003
713 R 51585 LEAF SPRINGS OF MOTOR VEHICLES General specifications - Incorporates Corrigendum: 2004 2000 GOST 0
714 21558 EXCITATION SYSTEMS FOR TURBOGENERATORS, HYDROGENERATORS AND SYNCHRONOUS 2000 GOST 0
CONDENSERS. General specifications
715 R 51317.4.14 Electromagnetic compatibility IMMUNITY TO POWER VOLTAGE FLUCTUATIONS Requirements and test methods 2000 GOST 0
716 R 51689 Rotating Electrical Machines ASYNCHRONOUS MOTORS WITH POWER OF 0.12 TO 400 kW INCLUSIVE General 2000 GOST 0
Technical Requirements
717 12.2.007.13 Occupational Safety Standards System ELECTRIC LAMPS Safety requirements 2000 GOST 0
718 27577 COMPRESSED NATURAL FUEL GAS FOR INTERNAL-COMBUSTION ENGINES Specifications 2000 GOST 0
719 R 51317.4.16 Electromagnetic Compatibility of Technical Equipment IMMUNITY TO CONDUCTED DISTURBANCES IN THE 2000 GOST 0
FREQUENCY BAND FROM 0 TO 150 kHz Requirements and Test Methods
720 R 51317.2.4 Electromagnetic compatibility of technical equipment ELECTROMAGNETIC ENVIRONMENT Compatibility levels for 2000 GOST 0
low-frequency conducted disturbances in power supply systems of industrial plants
721 R 51685 Railway rails. General specifications 2000 GOST 0
722 R 51682 Casing and coring tubes for geology-exploring drilling. Specifications 2000 GOST 0
723 R 50746 Electromagnetic compatibility of technical equipment TECHNICAL DEVICES FOR NUCLEAR STATIONS 2000 GOST 0
Requirements and test methods
724 R 50009 Electromagnetic compatibility of technical equipment. Components of intruder alarm systems. Requirement and test 2000 GOST 0
methods
725 R 51317.4.1 Electromagnetic compatibility of technical equipment IMMUNITY TESTS Types of tests 2000 GOST 0
726 R 51317.2.5 Electromagnetic compatibility of technical equipment ELECTROMAGNETIC ENVIRONMENT Classification of 2000 GOST 0
electromagnetic disturbances for different locations of technical equipment
727 533 ROTATING ELECTRICAL MACHINERY. TURBOGENERATORS General Specifications 2000 GOST 0
728 5950 Bars, Strips and Hanks Made of Tool Slloy Steel General Specifications 2000 GOST 0
729 R 50628 Electromagnetic compatibility of technical equipment. Immunity of personal computers to electromagnetic disturbances. 2000 GOST 0
Requirements and test methods
730 R 51629 Logging machines INDUSTRIAL TIMBER TRACTORS Methods of determination of movers average ground pressure 2000 GOST 0
731 33 Petroleum products TRANSPARENT AND OPAQUE LIQUIDS Determination of kinematic viscosity and calculation of 2000 GOST 0
dynamic viscosity
732 10181 CONCRETE MIXTURES Test Methods 2000 GOST 0
733 R 51318.24 Electromagnetic compatibility of technical equipment. Immunity of information technology equipment. Requirements and 1999 GOST 0
test methods
734 R 51330.13 EXPLOSION-PROOF ELECTRIC EQUIPMENT Part 14 Electric devices in explosive zones (except for underground 1999 GOST 0
openings) - Same as IEC 60079-14-96
735 30630.1.2 TESTING THE MACHINES, DEVICES AND OTHER TECHNICAL PRODUCTS FOR RESISTANCE TO EXTERNAL 1999 GOST 0
MECHANICAL LOADS TESTING FOR RESISTANCE TO VIBRATION
736 30672 SOILS. FIELD TESTS. GENERAL PROVISIONS 1999 GOST 0
737 R 41.35 Uniform provisions concerning the approval of vehicles with regard to the arrangement of foot controls 1999 GOST 0
738 30631 GENERAL REQUIREMENTS FOR MACHINERY, INSTRUMENTATION AND OTHER INDUSTRIAL PRODUCTS 1999 GOST 0
REGARDING THE RESISTANCE TO THE MECHANICAL EXTERNALLY ACTING FACTORS DURING
OPERATION
739 R 51330.3 EXPLOSION PROOF ELECTRICAL EQUIPMENT Part 2 Filling or Purging of Pressurized Enclosure ‫_ر‬ 1999 GOST 0
740 12580 LATEX FILMS - METHOD FOR DETERMINATION OF TENSILE STRESSSTRAIN PROPERTIES - Incorporating 1999 GOST 0
Amendment 1: 03/1989
741 R 51386 Radio Relay Equipment INTERFACE CIRCUITS Methods of Parameter Measurements 1999 GOST 0
742 R 51274 Tanks and Apparatus COLUMN TYPE APPARATUS Strength Norms and Calculation Methods - Incorporates 1999 GOST 0
Amendment 1: February 2006
743 R 51320 Electromagnetic compatibility of technical equipment. Industrial Radio Interference Methods of Testing the Technical 1999 GOST 0
Equipment as Sources of Industrial Radio Interference
744 R 51330.10 EXPLOSION-PROOF ELECTRIC EQUIPMENT Part 11 Intrinsically Safe Circuit i 1999 GOST 0
745 R 51330.0 Explosion-Proof Electric Equipment Part 0 General requirements - Incorporates Amendment 1: 05/24/2006 1999 GOST 0
746 14923 Enamels PF-223. Specifications - Incorporating Amendment 1: 09/1983; Amendment 2: 03/1988; Amendment 3: 03/1996 1999 GOST 0
and Includes Corrigendum: 2014
747 R 51330.9 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES Part 10 Classification of hazardous areas - (IEC 1999 GOST 0
60079-10):1995
748 R 51330.8 EXPLOSION-PROOF ELECTRICAL APPARATUS Part 7 Type of protection ‫ذ‬µ 1999 GOST 0
749 R 51344 Safety of Machinery PRINCIPLES OF RISK DETERMINATION AND ASSESSMENT 1999 GOST 0
750 27883 INDUSTRIAL PROCESS MEASUMENT AND CONTROL FACILITIES. RELIABILITY GENERAL 1999 GOST 0
REQUIREMENTS AND TEST METHODS
751 R 12.4.226 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALL FROM A HEIGHT 1999 GOST 0
752 R 41.86 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF AGRICULTURAL OR FORESTRY TRACTORS 1999 GOST 0
WITH REGARD TO THE INSTALLATION OF LIGHTING AND LIGHT-SIGNALLING DEVICES
753 1435 BARS, STRIPS, AND COILS MADE OF TOOL PLAIN STEEL General Specifications 1999 GOST 0
754 12.2.007.11 OCCUPATIONAL SAFETY STANDARDS SYSTEM SEMICONDUCTOR CONVERTERS OF ELECTRIC ENERGY 1999 GOST 0
SAFETY REQUIREMENTS - Incorporates Amendments 1:12/1983 and Amendment 2:06/1988
755 R 51336 Safety of machinery EMERGENCY STOP EQUIPMENT FUNCTIONAL ASPECTS. DESIGN PRINCIPLES 1999 GOST 0
756 R 12.4.224 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT. SAFETY TETHERS General 1999 GOST 0
technical requirements. Test methods
757 R 51317.6.2 Electromagnetic Compatibility of Technical Equipment ELECTROMAGNETIC INTERFERENCE IMMUNITY OF 1999 GOST 0
TECHNICAL EQUIPMENT USED IN INDUSTRIAL ZONES Requirements and Test Methods
758 R 50030.6.1 Low-voltage switchgear and controlgear Part 6 MULTIPLE FUNCTION EQUIPMENT Section 1. Automatic transfer 1999 GOST 0
switching equipment
759 R 51319 Electromagnetic compatibility of technical equipment RADIO DISTURBANCE MEASURING APPARATUS Technical 1999 GOST 0
requirements and test methods
760 R 22.1.07 Safety in Emergency MONITORING AND FORECASTING OF DANGEROUS WEATHER EVENTS AND 1999 GOST 0
PROCESSES General Requirements
761 15167 CERAMIC SANITARY WARE General Specifications - Incorporates Amendment 1: 12/1997 1999 GOST 0
762 16442 PLASTIC-INSULATED POWER CABLES SPECIFICATIONS - Incorporates Amendment 1: 02/1982, Amendment 2: 1999 GOST 0
07/1983, Amendment 3: 08/1986, Amendment 4: 02/1996, and Amendment 5: 03/1999; Includes Amendment 7; Inlcudes
Corrigendum: 1999; Corrigendum: 2000
763 R 41.10 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO 1999 GOST 0
ELECTROMAGNETIC COMPATIBILITY - Incorporating Amendment 1: 02/2002
764 12569 SUGAR Acceptance Procedure and Sampling Methods 1999 GOST 0
765 R 51317.3.3 Electromagnetic compatibility of technical equipment. Voltage fluctuation and flicker due to equipment with consumption 1999 GOST 0
current not more than 16 a (per A phase) connected to low-voltage supply systems Limit Norms and Test Methods - (IEC
61000-3-3)
766 14340.2 ROUND ENAMELED WIRES ADHESION TEST METHODS - Incorporating Amendment 1: 01/1975; Amendment 2: 1999 GOST 0
06/1984; Amendment 3: 11/1987; Amendment 4: 08/1988; Amendment 5: 04/1991; Amendment 6: 01/1995
767 R 12.4.192 INDIVIDUAL RESPIRATORY PROTECTIVE EQUIPMENT. FILTERING HALF-MASKS EQUIPPED WITH 1999 GOST 0
INHALATION VALVES AND FIXED GAS FILTERS AND (OR) COMBINED FILTERS General Specifications -
Incorporates Corrigendum: 10/2000, Corrigendum: 09/2001, and Corrigendum: 02/2003
768 R 51317.3.8 Electromagnetic Compatibility SIGNALING ON LOW-VOLTAGE NETWORKS Emission Levels, Frequency Bands and 1999 GOST 0
Electromagnetic Interference Levels
769 12.2.010 Occupational Safety Standards System PNEUMATIC HAND MACHINES General safety requirements - Incorporating 1999 GOST 0
Amendment 1: 02/1982; Amendment 2: 11/1986; Amendment 3: 02/1992
770 R 12.4.194 Occupational Safety Standards System PERSONAL RESPIRATORY PROTECTIVE DEVICES PARTICLE FILTERS 1999 GOST 0
General specifications
771 R 51317.4.3 "Electromagnetic compatibility of technical equipment. Radiated, radio-frequency electromagnetic field immunity. 1999 GOST 0
Requirements and test methods"
772 R 51365 WELLHEAD OIL-FIELD EQUIPMENT General Specifications - Same as ISO 10423-94 1999 GOST 0
773 R 41.71 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF AGRICULTURAL TRACTORS WITH REGARD TO 1999 GOST 0
THE DRIVESRâ__S FIELD OF VISION
774 R 12.4.222 Occupational safety standards system PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT. 1999 GOST 0
SHOCK-ISOLATORS General technical requirements. Test methods
775 R 51330.7 EXPLOSION-PROOF ELECTRIC EQUIPMENT Part 6 Oil immersion "o" 1999 GOST 0
776 805 Steelmaking pig iron. Specifications 1999 GOST 0
777 R 12.2.141 Occupational safety standards system. Surface drilling equipment. Safety requirements 1999 GOST 0
778 12359 ALLOY AND HIGH-ALLOY CARBON STEELS Determination of nitrogen content 1999 GOST 0
779 R 51317.4.4 Electromagnetic compatibility of technical devices RESISTANCE TO NANOSECOND IMPULSE NOISE Requirements 1999 GOST 0
and test methods - See also IEC 61000-4-4:1995
780 R 51330.19 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES Part 20 Data on flammable gases and vapors 1999 GOST 0
relating to the use of electrical apparatus
781 R 51557 Electric Toys Safety Requirements 1999 GOST 0
782 R 41.88 Uniform provisions concerning the approval of retroreflective tyres for two-wheeled vehicles 1999 GOST 0
783 2177 Petroleum products. Methods for determination distillation characteristics 1999 GOST 0
784 12570 Sugar. Methods for determination of moisture and dry matters 1999 GOST 0
785 R 51330.14 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES Part 15 Protection of Type â__nâ__ 1999 GOST 0
786 R 12.4.213 Occupational safety standards system INDIVIDUAL PROTECTION MEANS OF ORGANS OF HEARING. HEARING 1999 GOST 0
PROTECTORS Simplified method of measuring acoustic efficiency of hearing protectors for their quality estimation
787 R 51330.0 EXPLOSION-PROOF ELECTRIC EQUIPMENT Part 0 General requirements - Incorporates Amendment 1: 05/24/2006 1999 GOST 0
788 R 12.4.225 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT. CONNECTING ELEMENTS General 1999 GOST 0
technical requirements. Test methods
789 28466 Horns and signal whistles. General specifications - Incorporates Amendment 1: 11,1996; Amendment 2: 3,1998 1999 GOST 0
790 R 51330.11 Explosionprotected electrical apparatus. Part 12. Classification of mixtures of gases or vapours with air according to their 1999 GOST 0
maximum experimental safe gaps and minimum igniting currents
791 12.1.004 Occupational safety standards system. Fire safety. General requirements - Incorprates Amendment 1: 1993 1999 GOST 0
792 R 51516 Electromagnetic compatibility - MEASURING RELAYS AND PROTECTION DEVICES IMMUNITY TO 1999 GOST 0
NANOSECOND IMPULSE DISTURBANCES - Requirements and test methods
793 R 41.94 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO THE PROTECTION 1999 GOST 0
OF THE OCCUPANTS IN THE EVENT OF A FRONTAL COLLISION - UN ECE Regulation No. 94
794 10390 ELECTRICAL EQUIPMENT FOR VOLTAGE ABOVE 3 kV Test methods for external insulation in contaminated 1999 GOST 0
condition - Incorporating Amendment 1: 12/1988
795 R 12.4.223 Occupational safety standards system PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT. 1999 GOST 0
SLINGS General technical requirements. Test methods
796 R 51518 SEWN ARTICLES Determination of maximum force to seam rupture during stretching using the grab method 1999 GOST 0
797 30630.0.0 ENVIRONMENTAL TESTING OF MACHINES, DEVICES AND OTHER TECHNICAL PRODUCTS 1999 GOST 0
798 R 51255 WHEELSETS FOR SUBWAY CARS General Safety Requirements - Includes Amendment 1: 2001 and Amendment 2: 1999 GOST 0
2009
799 R 51361 Closed-circuit dry-cleaning machines. Test methods 1999 GOST 0
800 R 12.4.205 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT. RESTRAINING SYSTEMS General 1999 GOST 0
technical requirements. Test methods
801 R 51330.17 EXPLOSION-PROTECTED ELECTRICAL APPARATUS Part 18 Type of protection encapsulation â__mâ__ 1999 GOST 0
802 23118 STEEL BUILDING STRUCTURES General Specifications 1999 GOST 0
803 R 51330.1 EXPLOSION-PROOF ELECTRIC EQUIPMENT Part 1 Explosion protection using explosion-tight enclosures 1999 GOST 0
804 9128 ASPHALTIC CONCRETE MIXTURES FOR ROADS AND AERODROMES AND ASPHALTIC CONCRETE - 1999 GOST 0
Specifications - Includes Amendment 1: 2001 and Amendment 2: 2002
805 R 51400 "Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable 1999 GOST 0
sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms"
806 30630.1.1 TEST METHODS FOR RESISTANCE OF MACHINES, DEVICES AND OTHER TECHNICAL PRODUCTS TO 1999 GOST 0
EXTERNAL MECHANICAL LOADS DETERMINATION OF DYNAMIC CHARACTERISTICS OF PRODUCTS
807 R 51248 OVERLAND CRANE RAIL TRACKS General technical requirements 1999 GOST 0
808 13758 AGRICULTURAL MACHINES. DRIVE SHAFTS Specifications - Incorporating Amendment 1: April 1991 1999 GOST 0
809 20022.5 WOOD PROTECTION High-Pressure Treatment with Oily Protectants - Incorporating Amendment 1: 08/1999 1999 GOST 0
810 R 51364 AIR COOLING DEVICES General Specifications 1999 GOST 0
811 24866 SEALED INSULATING GLASS UNITS Specifications - Includes Corrigendum: 2004 1999 GOST 0
812 R 51266 Motor Vehicles FORWARD VIEW FROM THE DRIVERâ__S SEAT Technical Requirements Test Methods 1999 GOST 0
813 R 51568 Test sieves of metal wire cloth. Specifications 1999 GOST 0
814 R 51342 Safety of Machinery DETACHABLE SAFETY GUARDS General Requirements for Designing and Manufacturing of 1999 GOST 0
Fixed and Movable Detachable Safety Guards
815 R 41.95 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO THE PROTECTION 1999 GOST 0
OF THE OCCUPANTS IN THE EVENT OF A LATERAL COLLISION - UN ECE Regulation No. 95
816 R 51401 Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an 1999 GOST 0
essentially free field over a reflecting plane
817 30679 STANDARD PLATINUM RESISTANCE THERMOMETERS of the 1st and 2nd GRADES General Technical 1999 GOST 0
Requirements
818 11868 ELECTRIC DEVICES FOR FLOOR TRACKLESS MACHINES OF ELECTRIFIED TRANSPORT GENERAL 1999 GOST 0
SPECIFICATIONS - Incorporates Amendment 1: 12/1981, Amendment 2: 02/1990
819 R 51330.16 EXPLOSION-PROOF ELECTRICAL EQUIPMENT Part 17 Inspection and maintenance of electrical installations in 1999 GOST 0
explosive zones (except for mines) - (IEC 60079-17):1996
820 R 51515 Electromagnetic compatibility of technical equipment. Immunity of sound and television broadcast receivers and associated 1999 GOST 0
equipment to electromagnetic disturbances. Requirements and test methods
821 24902 HOUSEHOLD AND POTABLE WATER GENERAL REQUIREMENTS FOR FIELD METHODS OF ANALYSIS - 1999 GOST 0
Incorporating Amendment 1: 11/1987
822 R 51273 Vessels and Apparatus - NORMS AND METHODS OF STRENGTH CALCULATION - Rated Force Calculation of 1999 GOST 0
Column Type Apparatus against Wind Loads and Seismic Effects - Includes Amendment 1: 03/01/2006
823 R 51317.3.2 Electomagnetic compatibility of technical equipment. Harmonic current component emission (CONSUMPTION 1999 GOST 0
CURRENT NOT MORE THAN 16 A PER A PHASE) Limit Norms and Test Methods - (IEC 61000-3-2)
824 12.1.008 Occupational safety standards system BIOLOGICAL SAFETY General requirements 1999 GOST 0
825 R 51402 Noise of Machines DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND 1999 GOST 0
PRESSURE Survey method using an enveloping measurement surface over a reflecting plane
826 R 12.4.206 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT Test methods 1999 GOST 0
827 R 51263 CONCRETE WITH POLYSTYRENE AGGREGATES Specifications 1999 GOST 0
828 6143 AXLE BILLETS FOR TRAM CARS SPECIFICATIONS - Incorporates Amendments 1: 06/1984 and Amendment 2: 1999 GOST 0
12/1996; Incorporated Corrigendum 1: 10/1984 and Corrigendum 2: 03/1997
829 R 51330.5 EXPLOSION-PROOF ELECTRIC EQUIPMENT Part 4 Method for the determination of spontaneous ignition temperature 1999 GOST 0
- Same as IEC 60079-4-75
830 3634 ACCESS GULLY MANHOLES AND GUTTER GULLY RECIEVERS Specifications 1999 GOST 0
831 5365 ELECTRIC INSTRUMENTS DIALS AND SCALES GENERAL TECHNICAL REQUIREMENTS - Incorporates 1998 GOST 0
Amendments 1: 03/1987 and Amendment 2: 03/1987: Incorporated Corrigendum 1: 05/1993
832 5919 HEXAGON THIN SLOTTED AND CASTLE NUTS OF ACCURACY CLASS B Design and dimensions - Amendment 1: 1998 GOST 0
09/1979; Amendment 2: 12/1981; Amendment 3: 10/1984; Amendment 4: 03/1989; Amendment 5: 03/1990; CMEA
STANDARD 2663-89
833 R 51238 Nontraditional power engineering. Small hydropower engineering. Terms and definitions 1998 GOST 0
834 2582 ROTATING ELECTRIC MACHINES FOR RAIL AND ROAD VEHICLES General Specifications - Incorporating 1998 GOST 0
Amendment 1: 8/1982; Amendment 2: 6/1987; Amendment 3: 6/1989; Amendment 4: 6/1990; Includes Corrigendum: 2008
835 20899 METALLIC POWDERS FLOWABILITY DETERMINATION BY MEANS OF CALIBRATED FUNNEL (HALL 1998 GOST 0
FlOWMETER) - Incorporates Corrigendum: 2002
836 R 51137 Asynchronous controlled variable electric drives for energetic objects. General specifications 1998 GOST 0
837 9211 DRESSED FUR SKINS AND FUR-COAT SHEEPSKINS METHOD FOR DETERMINATION OF COLOR FASTNESS 1998 GOST 0
TO LIGHT - Incorporates Amendment 1: 10/1981
838 R 51241 ACCESS CONTROL DEVICES AND SYSTEMS Classification General Technical Requirements Test Methods 1998 GOST 0
839 R 51155 LINE ACCESSORIES ACCEPTANCE RULES AND TEST METHODS 1998 GOST 0
840 7805 HEXAGON BOLTS OF ACCURACY CLASS A Design and Dimensions - AMD 2: 02,1974; AMD 3: 03,1981; AMD 4: 1998 GOST 0
05,1985; AMD 5: 03,1989; AMD 6: 07,1995
841 8278 STEEL ROLL-FORMED EQUAL CHANNELS ASSORTMENT - (CMEA Standard 105-86); Incorporates Amendment 1: 1998 GOST 0
10/1987 and Amendment 2: 06/1988
842 R 51204 Rod polymeric insulators for contact net of railways. General specifications 1998 GOST 0
843 12840 SAFETY LOCKS FOR SINGLE HOOKS TYPES AND DIMENSIONS - Incorporates Amendment 1: 03/1982, 1998 GOST 0
Amendment 2: 07/1990
844 5918 HEXAGON SLOTTED AND CASTLE NUTS OF ACCURACY CLASS B - Incorporating Amendment 1: 09/1979, 1998 GOST 0
Amendment 2: 12/1981, Amendment 3: 10/1984, Amendment 4: 03/1989, Amendment 5: 03/1990
845 R 51190 POLYAMIDE TUBING FOR AIR BRAKE DRIVE OF MOTOR VEHICLES GENERAL TECHNICAL 1998 GOST 0
REQUIREMENTS
846 7796 Hexagon reduced head bolts product grade B. Construction and dimensions - Incorporating AMD 2: 02/1974; AMD 3: 1998 GOST 0
03/1981; AMD 4: 05/1985; AMD 5: 03/1989; AMD 6: 07/1995
847 8313 INDUSTRIAL ETHYLCELLOSOLVE SPECIFICATIONS - Incorporates Amendment 1: 02/1996 1998 GOST 0
848 R 51203 Rod porcelain insulators for contact net of railways. General specifications 1998 GOST 0
849 22505 Electromagnetic compatibility of technical equipment. Man-made noise of sound and television broadcast receivers and 1998 GOST 0
associated equipment. Limits and test methods
850 5916 HEXAGON LOCK-NUTS OF ACCURACY CLASS ‫ _ذ‬Design and Dimensions - Incorporating Amendment 2: 02/1974, 1998 GOST 0
Amendment 3: 03/1981, Amendment 4: 06/1983, Amendment 5: 05/1985, Amendment 6: 03/1989, Amendment 7: 07/1995
851 R 51193 Spectacle corrections. General specifications 1998 GOST 0
852 10835 SHALE OIL FOR WOOD IMPREGNATION SPECIFICATIONS - Incorporating Amendement 1: 4/1981; Amendment 2: 1998 GOST 0
4/1986; Amendment 3: 6/1991
853 30546.1 GENERAL REQUIREMENTS FOR MACHINES, INSTRUMENTS AND OTHER INDUSTRIAL PRODUCTS AND 1998 GOST 0
THE CALCULATION METHODS FOR THEIR COMPLEX STRUCTURES REGARDING SEISMIC STABILITY -
Incorporating Amendment 1: 05/03; Corrigendum: 12/06
854 12801 MATERIALS ON THE BASIS OF ORGANIC BINDERS FOR ROAD AND AERODROME CONSTRUCTION Test 1998 GOST 0
Methods
855 3475 AUTONATIC COUPLER FOR 1520 (1524) mm GAUGE RAILWAY ROLLING STOCK MOUNTING DIMENSIONS - 1998 GOST 0
Incorporates Amendment 1: 08/1986 and Amendment 2: 02/1991
856 R 51164 STEEL MAIN PIPELINES GENERAL REQUIREMENTS FOR PROTECTION AGAINST CORROSION 1998 GOST 0
857 7795 HEXAGON REDUCED HEAD BOLTS WITH GUIDE NECK, OF ACCURACY CLASS B Design and Dimensions - 1998 GOST 0
AMD 2: 02,1974; AMD 3: 03,1981; AMD 4: 05,1985; AMD 5: 03,1989; AMD 6: 07,1995
858 R 51175 GEAR WHEELS FOR TRACTION GEARING OF TRACTION ROLLING STOCK OF MAIN-LINE RAILWAYS 1998 GOST 0
SPECIFICATIONS
859 R 50060 Gasoline chain saws. Safety requirement. Test Methods 1998 GOST 0
860 R 51186 Alarm sonic passive glass break detectors for use in buildings. General technical requirements and methods of tests 1998 GOST 0
861 30552 PROFILE BILLETS (ROUGH AXLES) FOR 1520 mm GAUGE RAILWAYS ROLLING STOCK Allowances and 1998 GOST 0
tolerances
862 6942 CAST-IRON SEWER PIPES AND SHAPED PARTS FOR THEM. Specifications. 1998 GOST 0
863 R 51142 Services. Hairdressing services. General specifications 1998 GOST 0
864 9815 BROWN COALS, HARD COALS, ANTHRACITE AND COMBUSTIBLE SHALES METHOD OF SEAM SAMPLING 1998 GOST 0
- Incorporates Amendment 1: September 1985; Amendment 2: March 1990; Amendment 3: February 1992
865 12503 STEEL ULTRASONIC TECHNIQUES. GENERAL REQUIREMENTS - Incorporating Amendment 1: 12/1987 1998 GOST 0
866 8802 PASSENGER TRAMCARS Specifications - Incorporating Amendment 1: 1/1984; Amendment 2: 6/1988 1998 GOST 0
867 5927 HEXAGON NUTS OF ACCURACY CLASS A Design and Dimensions - Amendment 2: 02/1974; Amendment 3: 1998 GOST 0
03/1981; Amendment 4: 06/1983; Amendment 5: 05/1985; Amendment 6: 03/1989; Amendment 7: 07/1995; CMEA
Standard 3680-82
868 R 51139 Signal combining device of several VHF and UNF band transmitters for TV and broadcasting purposes. Basic parameters. 1998 GOST 0
Technical requirements. Methods of measurements
869 25088 SHIP DOORS Specifications 1998 GOST 0
870 2184 Sulphuric acid for industrial use. Specifications - Incorporating Amendment 1: 4/1979, Amendment 2: 7/1982, Amendment 1998 GOST 0
3: 10/1987, Amendment 4: 6/1990
871 30574 Reciprocating internal combustion engines EXHAUST EMISSION AND EXHAUST GAS SMOKE Test cycles - 1998 GOST 0
Incorporating Amendment 1: 5/2004
872 6479 VISCOUS LUBRICANTS METHOD OF DETERMINATION OF MECHANICAL IMPURITIES CONTENT BY 1998 GOST 0
DECOMPOSITION WITH HYDROCHLORIC ACID - Incorporates Amendments 1: 05/1977; Amendment 2: 02/1985 and
Amendment 3: 05/1988; CMEA Standard 5872-87
873 9087 MELTED WELDING FLUXES Specifications - Incorporating Amendment 1: 06/1988 and Amendment 2: 06/1990 1998 GOST 0
874 9069 ESSENTIAL OILS, AROMATICS AND THEIR SYNTHESIS INTERMEDIATE PRODUCTS, COSMETIC RAW 1998 GOST 0
MATERIALS PACKING, MARKING, TRANSPORTATION AND STORAGE - Incorporating Amendment 1: 11/1979;
Amendment 2: 12/1984 and Amendment 3: 05/1989
875 R 51160 BUSES FOR TRANSPORTING CHILDREN - TECHNICAL REQUIREMENTS - Includes Amendment 1: 09/01/2003 1998 GOST 0
876 5935 HEXAGON SLOTTED LOCK-NUTS WITH REDUCED ACROSS FLATS WIDTH, OF ACCURACY CLASS A Design 1998 GOST 0
and Dimensions - Incorporating Amendment 1: 09/1979, Amendment 2: 12/1981, Amendment 3: 10/1984, Amendment 4:
03/1989
877 R 51148 "Medical devices. Requirements for samples and documentation presented for toxicological tests, sanitary and chemical 1998 GOST 0
analyses, tests for sterility and pyrogenicity"
878 5933 HEXAGON THIN SLOTTED AND CASTLE NUTS OF ACCURACY CLASS A Design and dimensions - Amd 1: 1998 GOST 0
2/1974; Amd 2: 9/1979; Amd 3: 12/1981; Amd 4: 10/1984; Amd 5: 3/1989; Amd 6: 3/1990
879 2524 HEXAGON NUTS WITH REDUCED ACROSS FLATS WIDTH, OF ACCURACY CLASS A Design and Dimensions - 1998 GOST 0
Incorporating Amendment 2: 02/1974, Amendment 3: 03/1981, Amendment 4: 06/1983, Amendment 5: 05/1985;
Amendment 6: 03/1989; Amendment 7: 07/1995
880 18899 STEEL WIRE ROPES LOCKED CONVEYING WIRE ROPES SPECIFICATIONS AND ASSORTMENT - Incorporates 1998 GOST 0
Amendments 1:07/1977, Amendment 2:04/1982, Amendment 3:03/1985, Amendment 4:10/1987, Amendment 5:12/1989,
and Amendment 6: 05/2001
881 R 51143 Launching and technical complexes of space-rocket complexes. General requirements for tests and acceptance 1998 GOST 0
882 9209 DRESSED FUR SKINS AND FUR-COAT SHEEPSKINS ACCEPTANCE, SAMPLING AND PREPARATION FOR 1998 GOST 0
THE CONTROL - Incorporates Amendment 1: 05/1983 and Amendment 2: 05/1988; Includes Amendment 3: 2001
883 12764 IRON ORES, CONCENTRATES, SINTERS AND PELLETS MOISTURE DETERMINATION METHOD - 1998 GOST 0
Incorporating Amendment 1: 06/1979; Amendment 2: 06/1984; Amendment 3: 05/1989
884 17.2.2.02 "Nature protection. Atmosphere. Rates and testing methods of exhaust smoke from diesel engines, tractors and agricultural 1998 GOST 0
machines"
885 18962 TRACKLESS FLOOR ELECTRIFIED VEHICLES GENERAL SPECIFICATIONS 1998 GOST 0
886 30546.3 METHODS FOR DETERMINATION OF SEISMIC RESISTANCE OF MACHINES, EQUIPMENT AND OTHER 1998 GOST 0
TECHNICAL DEVICES DURING THEIR ACCEPTANCE (CERTIFICATION) TEST FOR SEISMIC SAFETY AT THE
PLACE OF OPERATION - Includes Amendment 1: 2005
887 4832 Foundry pig iron. Specifications 1998 GOST 0
888 30232 Thermal transducers with unified output signal. General technical requirements 1998 GOST 0
889 R IEC 927 AUXILIARIES FOR LAMPS STARTING DEVICES (except for glow starters) REQUIREMENTS FOR 1998 GOST 0
PERFORMANCE DATA - Same as IEC 927 (1996)
890 30575 Marine, Locomotive and Industrial Diesel Engines Airborne Noise Measurement and Evaluation Methods 1998 GOST 0
891 R 51151 Garage equipment. Safety requirements and methods of inspection 1998 GOST 0
892 10223 Gravimetric filling instruments. General technical requirements 1998 GOST 0
893 11371 Washers - Specifications - Incorporates Amendment 1: 11/1983, Amendment 2: 05/1988 and Amendment 3: 05/1990 1998 GOST 0
894 R 51177 Overhead line hardware. General specifications 1998 GOST 0
895 17.2.2.05 "Nature protection. Atmosphere. Rates and testing methods of harmful substances ejections with exhaust gases from diesel 1998 GOST 0
engines, tractors and agricultural machines"
896 9833 RUBBER TOROIDAL SEALING RINGS FOR HYDRAULIC AND PNEUMATIC EQUIPMENT DESIGN AND 1998 GOST 0
DIMENSIONS - Incorporating Amendment 1: 02/1979; Amendment 2: 08/1982 and Amendment 3: 06/1987
897 10807 Road signs. General specifications - Incorporates Amendment 1: 03/1984, Amendment 2: 04/1986, Amendment 3: 1998 GOST 0
04/1988, Amendment 4: 04/1990, and Amendment 5: 06/1998; Includes Amendment 6: 2001
898 R 51178 Clips for ball-socket couplings of line hardware and insulators. Specifications 1998 GOST 0
899 30546.2 SEISMIC RESISTANCE TEST FOR MACHINES, DEVICES AND OTHER TECHNICAL PRODUCTS General 1998 GOST 0
Provisions and Test Methods - Incorporating Amendment 1: 2005
900 R 51232 DRINKING WATER General requirements for organization and methods of quality control 1998 GOST 0
901 23457 TRAFFIC CONTROL DEVICES. Application Rules 1998 GOST 0
902 6572 PAINT AND VARNISH COATINGS OF TRACTORS AND AGRICULTURAL MACHINERY GENERAL 1998 GOST 0
TECHNICAL REQUIREMENTS - Incorporates Amendment 1: 03/1995; Incorporated Corrigendum 05/1995
903 2464 GRINDING SEGMENTS SPECIFICATIONS - Incorporating Amendment 1: 11/1983; Amendment 2: 04/1987; ; 1998 GOST 0
Amendment 3: 08/1988; ; Amendment 4: 02/1990
904 3122 DIESEL FUELS Method for determination of cetane rating - Incorporating Amendment 1: 05/1972; Amendment 2: 1998 GOST 0
04/1983; Amendment 3: 03/1987 and Amendment 4: 06/1989
905 22584 Rope electric hoists. General specifications 1997 GOST 0
906 7482 Glycerine. Acceptance rules and test methods 1997 GOST 0
907 14110 Reusable semitiqid slings. Specifications 1997 GOST 0
908 R 51103 Cinematography. Professional motion-picture equipment and apparatus. Safety requirement and control methods 1997 GOST 0
909 R 51060 Instruments for measurement of optical average power of fibre optics transmission system. General technical requirements 1997 GOST 0
910 7742 Headlamps of Working Lighting for Tractors and Agricultural Machines. General Specifications - Incorporates 1997 GOST 0
Amendment 1: 2/1981, Amendment 2: 6/1987, Amendment 3: 11/1988 and Amendment 4: 10/1992
911 9.706 UNIFIED SYSTEM OF PROTECTION AGAINST CORROSION AND AGEING POLYMERIC MATERIALS TEST 1997 GOST 0
METHODS FOR RESISTANCE TO RADIATION AGEING - Incorporating AMD 1: 06,1984; AMD 2: 06,1989
912 10529 Theodolites. General specifications 1997 GOST 0
913 6266 Gypsum plasterboards. Specifications 1997 GOST 0
914 12.4.002 System of satety standards. Vibration protection means for hands. Technical requirements and test methods 1997 GOST 0
915 15052 Cakes. General specifications 1997 GOST 0
916 R 51053 Safes locks. Requirements and test methods for resistance to criminal open without lock breakage and to burglary 1997 GOST 0
917 30548 BONDED FABRICS (BASE) FOR LINOLEUM. Test methods 1997 GOST 0
918 R 51102 Decontaminable protective polymeric coatings. General technical requirements 1997 GOST 0
919 21.101 SYSTEM OF PROJECT DOCUMENTATION FOR CONSTRUCTION MAIN REQUIREMENTS FOR PROJECT AND 1997 GOST 0
WORKING DOCUMENTATION
920 3916.2 Plywood with outer layers of coniferous veneer for general use. Specifications 1997 GOST 0
921 R 51052 Automatic water and foam fire extinguishing installation. Shut-down valves. General technical requirements. Test methods 1997 GOST 0
922 7022 Semolina. Specifications 1997 GOST 0
923 15810 Gingerbread confectionery. General specifications 1997 GOST 0
924 1497 METALS Tension Test Methods - Incorporating Amendment No. 1: August 1987; Amendment No. 2: October 1989 and 1997 GOST 0
Amendment No. 2: May 1990; Includes Corrigendum: 04/2014 and Corrigendum: 11/2014
925 30530 Noise CALCULATION METHODS FOR MAXIMUM PERMISSIBLE NOISE CHARACTERISTICS OF 1997 GOST 0
STATIONARY MACHINES
926 28122 Stone-dressing machines grinding-polishing. General technical requiremes and test methods 1997 GOST 0
927 R 51049 Fire equipment. Fire pressure hose. General requirements. Test methods 1997 GOST 0
928 R 51087 Tobacco products. Information for consumer 1997 GOST 0
929 11482 Cold smoked fish. Specifications 1997 GOST 0
930 2623 Baler products of Far-Easten salmon and Issyk-Kul trout cold-smoked. Specifications 1997 GOST 0
931 R 51045 "Steel rails of PP50, PP65 and PP75 types for industrial tracks. General specifications 1997 GOST 0
932 20469 Domestic electric meat mincers. Specifications 1997 GOST 0
933 R 51083 Wheelchairs for disabled persons. General specifications 1997 GOST 0
934 17066 THIN SHEET ROLLED HIGH STRENGTH STEEL SPECIFICATIONS 1997 GOST 0
935 6570 Electrical induction active and reactive energy meters. General specifications 1997 GOST 0
936 R 51047 Cutters for shearers and entry-driving machines. General specifications 1997 GOST 0
937 R 51084 Hand-cars for cargo and patients transportation. General specifications 1997 GOST 0
938 6441 Pastila type confectionery. General specification 1997 GOST 0
939 22702 "Boxes of corrugeted board for food-liquid bottles, supplied for export. Technical requirements" 1997 GOST 0
940 28541 Stone-sawing machines. General technical requirements and test methods 1997 GOST 0
941 9920 A.C. ELECTRIC INSTALLATIONS FOR VOLTAGE FROM 3 TO 750 kV CREEPAGE DISTANCE OF EXTERNAL 1997 GOST 0
INSULATION - CMEA Standard 6465-88
942 8752 REINFORCED RUBBER SEALS FOR SHAFTS SPECIFICATIONS - Incorporating Amendment 1: 02/1983; 1997 GOST 0
Amendment 2: 02/1984 and Amendment 3: 08/1990
943 R 51075 Television magnifying aids equipment. General specification 1997 GOST 0
944 30495 Wood protective substances. General specifications 1997 GOST 0
945 30146 Machines and equipment for production of sausage products and meat semi-finished products. General specifications 1997 GOST 0
946 6307 OIL PRODUCTS CHECK METHOD FOR WATER-SOLUBLE ACIDS AND ALKALIS - Incorporates Amendment 1: 1997 GOST 0
06/1984; Incorporated Corrigendum 1: 09/1984; CMEA Standard 3967-83
947 1516.2 Electrical equipment and installations for a.c. voltage 3 kV and higher. General methods of dielectric tests 1997 GOST 0
948 8240 HOT-ROLLED STEEL CHANNELS Assortment - Corrigendum: 12/2004 1997 GOST 0
949 22648 PLASTICS METHODS FOR DETERMINATION OF HYGIENIC PARAMETERS - Incorporates Amendments 1:01/1983 1997 GOST 0
and Amendment 2:12/1987
950 R 51076 Speech hearing aids trainers. General specification 1997 GOST 0
951 30487 SUBURBAN ELECTRIC TRAINS GENERAL SAFETY REQUIREMENTS 1997 GOST 0
952 R 21.1701 SYSTEM OF DESIGN DOCUMENTATION FOR CONSTRUCTION PERFORMANCE RULES FOR MOTOR ROADS 1997 GOST 0
WORKING DOCUMENTATION
953 6065 Canned of fried fish in oil. Specifications 1997 GOST 0
954 20056 Preserved spiced salted oceanic fish. Specifications 1997 GOST 0
955 24282 MACHINES OF FLOOR-TYPE TRACKLESS ELECTRIFIED TRANSPORT TEST METHODS 1997 GOST 0
956 13109 Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in public electrical systems 1997 GOST 0
957 30444 BUILDING MATERIALS. FLAME SPREAD TEST METHOD 1997 GOST 0
958 R 51107 Stereophonic broadcasting systems. Main parameters. Methods of measurements 1997 GOST 0
959 31.1066.03 Attachments for metal-cutting tools. Centre arbors for precision machining. General specifications 1997 GOST 0
960 R 51066 Profile survey systems of vertical shaft guides. General requirements and testing methods 1997 GOST 0
961 30248 Electrical carbon products. Electrical heating appliances made of carban fibre materials. General specifications 1997 GOST 0
962 7448 Salted fish. Specifications 1997 GOST 0
963 4754 PNEUMATIC TYRES FOR CARS, THEIR TRAILERS, LIGHTDUTY TRUCKS AND MINIBUSES SPECIFICATIONS 1997 GOST 0
- Includes Amendment: 2007
964 R 51016 Sets of carbon steel and aluminium alloys. General specifications 1997 GOST 0
965 27636 Equipment for stone extraction and pracessing. General specifications 1997 GOST 0
966 R 51090 PUBLIC PASSENGER VEHICLES GENERAL TECHNICAL REQUIREMENTS OF ACCESSIBILITY AND SAFETY 1997 GOST 0
FOR HANDICAPPED PERSONS
967 30515 CEMENTS General specifications 1997 GOST 0
968 22366 Sintered iron-base electrode strip for surfacing. Specifications 1997 GOST 0
969 13616 EXTRUDED RECTANGULAR STRIP-SHAPED PROFILES MADE OF ALUMINIUM, ALUMINIUM AND 1997 GOST 0
MAGNESIUM ALLOYS ASSORTMENT - Incorporates Corrigendum: 03/2000
970 2162 INSULATION RUBBERIZED TAPE Specifications 1997 GOST 0
971 8269.0 CRUSHED STONE AND GRAVEL MADE FROM DENSE ROCKS AND INDUSTRIAL WASTE PRODUCTS FOR 1997 GOST 0
CONSTRUCTION WORKS METHODS OF PHYSICOMECHANICAL TESTS - Incorporating Amendment 1: 12/2000,
Corrigendum: 2003, Corrigendum: 2004
972 12.2.135 "Equipment for processing meat and poultry farming products. Safetg requirements: Precautions, Sanitation and Oecology" 1997 GOST 0
973 R 51017 Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods 1997 GOST 0
974 22690 CONCRETES DETERMINATION OF STRENGTH BY NONDESTRUCTIVE TEST METHODS 1997 GOST 0
975 14192 Marking of cargoes - Incorporating Amendment 1: 6/2000 1997 GOST 0
976 30407 Tableware and decorative articles of glass. General specifications 1997 GOST 0
977 R 51108 Service dry cleaning. General specifications 1997 GOST 0
978 16523 ROLLED SHEETS MADE OF QUALITY AND ORDINARY CARBON STEEL FOR GENERAL PURPOSE 1997 GOST 0
Specifications - Includes Corrigendum: 2000
979 R 51067 Mine surveing anglemeters. General specifications 1997 GOST 0
980 7452 Canned fish natural juice. Specifications 1997 GOST 0
981 R 51068 Latex nipples for babies. Specifications 1997 GOST 0
982 R 51114 Automatic water and foam fire fighting systems. Feeder. General technical requirements. Test methods 1997 GOST 0
983 R 51025 "Spicy salted cieco, peled and tugun (in barrels). Specifications" 1997 GOST 0
984 12.2.138 Occupational safety standards system. Industrial sewing machines. Safety requirements and testing methods 1997 GOST 0
985 7742 HEADLIGHTS OF WORKING LIGHTING FOR TRACTORS AND AGRICULTURAL MACHINES General 1997 GOST 0
Specifications - Incorporates Amendment 1: 2/1981, Amendment 2: 6/1987, Amendment 3: 11/1988 and Amendment 4:
10/1992
986 30429 Electromagnetic compatibility of technical equipment. Man-made noise from equipment and apparatus used together with 1997 GOST 0
service receiver systems of civil application. Limits and test methods
987 R 51073 Implantable cardiac pacemakers. General specifications and basic test methods 1997 GOST 0
988 99 Cut veneer. Specifications 1997 GOST 0
989 12856 Asbestos-steel sheets and gaskets. Specifications 1997 GOST 0
990 22387.2 NATURAL COMBUSTIBLE GASES METHODS FOR DETERMINATION OF HYDROGEN SULFIDE AND 1997 GOST 0
MERCAPTAN SULFUR
991 6370 "Petroleum, petroleum products and additives. Method for determination of mechanical admixtures" - Incorporating 1997 GOST 0
Amendment 1: 7/1988
992 15960 Friction flexible asbestos materials and products of them. Specifications 1997 GOST 0
993 R 51041 Pile driving hammers. Specifications 1997 GOST 0
994 7564 ROLLED STOCK GENERAL RULES FOR SELECTION OF SAMPLES, BLANKS AND SPECIMENS FOR 1997 GOST 0
MECHANICAL AND TECHNOLOGICAL TESTING - Incorporating Corrigendum: 2002
995 R 8.568 State system for ensuring the uniformity of measurements. The verification of testing equipment. General principles 1997 GOST 0
996 30247.2 ELEMENTS OF BUILDING ‫_أ‬ONSTRUCTIONS FIRE RESISTANCE TEST METHOD DOORS AND GATES 1997 GOST 0
997 R 51040 Printed boards. Grid systems 1997 GOST 0
998 16369 Sawn timber transportation packages. Sizes 1997 GOST 0
999 R 12.4.186 Occupational safety standards system. Air breathing self-contained apparatuses. General specifications and testing methods 1997 GOST 0
1000 R 51070 Woltages instruments of electrical and magnetic fields. General technical requirements and methods of tests 1997 GOST 0
1001 11799 LONG VENT NEEDLES Design - Incorporating Amendment 1: 8/1980; Amendment 2: 6/1985; Amendment 3: 5/1992 1997 GOST 0
1002 30428 Electromagnetic compatibility of technical equipment. Man-made noise from wire communication equipment. Limits and 1997 GOST 0
test methods
1003 R 51115 Fire equipment. Fire turntable combined monitors. General technical requirements. Test methods 1997 GOST 0
1004 8269.1 CRUSHED STONE AND GRAVEL MADE OF ROCKS AND INDUSTRIAL WASTE PRODUCTS FOR 1997 GOST 0
CONSTRUCTION WORKS METHODS OF THE CHEMICAL ANALYSIS
1005 R 51032 CONSTRUCTION MATERIALS FLAME SPREAD TEST METHOD 1997 GOST 0
1006 30493 CERAMIC SANITARY WARE TYPES AND BASIC DIMENSIONS 1996 GOST 0
1007 30268 Carbons active impregnated. Specifications 1996 GOST 0
1008 27834 Tool joints for drill pipes. Specifications 1996 GOST 0
1009 12220 Toasted soy-bean meal as livestock feed. Specifications 1996 GOST 0
1010 R 50917 Braille‫_آ‬s printers. General specifications 1996 GOST 0
1011 30412 AUTOMOBILE ROADS AND AERODROMES UNEVENNESS MEASUREMENT METHODS FOR BASE AND 1996 GOST 0
PAVEMENTS
1012 R 50968 Gearmotors of general purpose. General standard specifications 1996 GOST 0
1013 27412 Jaw crushers. General spesifications 1996 GOST 0
1014 30432 METAL PIPES Selection of specimens, billets and samples for mechanical and technological tests 1996 GOST 0
1015 6824 DISTILLED GLYCERINE General Technical Specifications 1996 GOST 0
1016 16295 Anticorrosive paper. Specifications 1996 GOST 0
1017 30413 AUTOMOBILE ROADS. METHOD FOR DETERMINING THE COEFFICIENT OF ADHESION BETWEEN 1996 GOST 0
VEHICLE WHEEL AND ROAD PAVEMENT
1018 R 50969 Automatic gas fire extinguishing systems. General technical requirements. Test methods 1996 GOST 0
1019 R 50890 Low power television transmitters. Key parameters. Technical requirements. Measuring methods 1996 GOST 0
1020 21.302 SYSTEM OF DESIGN DOCUMENTATION FOR CONSTRUCTION GRAPHIC SYMBOLS FOR ENGINEERING 1996 GOST 0
GEOLOGICAL INVESTIGATION DOCUMENTS
1021 22011 Passenger and goods lifts. Specifications 1996 GOST 0
1022 31.211.41 Elements and assembly junctions of built up detachable fixtures forassembly and welding. Basic constructive elements and 1996 GOST 0
parameters. Precision norms
1023 9357 Domestic electric shavers. General specifications 1996 GOST 0
1024 30296 General-purpose measuring instruments for determination of main vibration parameters. General requirements 1996 GOST 0
1025 16518 Machine vice with hant and machanical drives. General specifications 1996 GOST 0
1026 1516.3 ELECTRICAL EQUIPMENT DESIGNED FOR AC VOLTAGES FROM 1 TO 750 kV REQUIREMENTS FOR 1996 GOST 0
ELECTRIC STRENGTH OF INSULATION
1027 R 50918 Braille‫_آ‬s displays. General specifications 1996 GOST 0
1028 R 50847 Dry food concentrates of instant first and second dishes. Specifications 1996 GOST 0
1029 R 50966 Knitted outerwear for children. Norms of physic-hygienic indices 1996 GOST 0
1030 20062 Tractors seat. General technical requirements 1996 GOST 0
1031 R 50909 Visual observation instruments. Safety requirements and test methods 1996 GOST 0
1032 6502 Khalva. General specification 1996 GOST 0
1033 R 50850 UNDERGROUND CARS GENERAL SPECIFICATIONS - Incorporating Amendment 1: 2000 and Amendment 2: 2011 1996 GOST 0
1034 30319.3 NATURAL GAS. PHYSICAL PROPERTIES CALCULATION METHODS PHYSICAL PROPERTIES 1996 GOST 0
DETERMINATION BY EQUATION OF STATE - Amendment 1
1035 21055 Full-ration mixed feeding stuffs for becon feeding of pigs. General specifications 1996 GOST 0
1036 18102 Castor oil for medical purposes. Specifications 1996 GOST 0
1037 19036 Cylindrical worm gear pairs. Basic worm and basic generating worm 1996 GOST 0
1038 R 50959 "Samovars (hot water boilers), using hard fuel. Specifications" 1996 GOST 0
1039 127.5 Ground sulphur for agriculture. Specification 1996 GOST 0
1040 8107 VALVES FOR CONSTANT-PRESSURE PNEUMATIC TUBES AND TYRES General Specifications - Incorporating 1996 GOST 0
Amendment 1: 02/1978; Amendment 2:08/1981; Amendment 3: 01/1984; Amendment 4: 07/1988; Amendment 5: 10/1991
1041 4568 Potassium chloride. Specifications 1996 GOST 0
1042 R 50991 AUTOMATIC PLAYING MACHINES TECHNICAL REQUIREMENTS AND TEST METHODS 1996 GOST 0
1043 8267 CRUSHED STONE AND GRAVEL OF SOLID ROCKS FOR CONSTRUCTION WORKS - Incorporating Amendment 1996 GOST 0
1: 12/1997, Amendment 2: 5/2000, Amendment 3: 4/2002
1044 8494 Wheaten rusks. Specification 1996 GOST 0
1045 R 50906 Pile driving equipment. General safety requirements 1996 GOST 0
1046 24940 BUILDINGS AND CONSTRUCTIONS Illuminance measurement methods - Incorporating Corrigendum: 1998 1996 GOST 0
1047 1284.3 DRIVING V-BELTS OF STANDARD CROSS-SECTIONS TRANSMITTED POWERS 1996 GOST 0
1048 7825 Soy-bean oil. Specifications 1996 GOST 0
1049 R 50914 SIGNAL-CONVERSION DEVICES FOR SIMULTANEOUS DUPLEX DATA TRANSMISSION VIA SWITCHED 1996 GOST 0
COMMUNICATION CHANNELS OF GENERAL TELEPHONE NETWORK AND UNSWITCHED VOICE-
FREQUENCY CHANNELS TYPES AND KEY PARAMETERS
1050 80 Sunflower cake. Specifications 1996 GOST 0
1051 9.711 UNIFIED SYSTEM OF PROTECTION AGAINST CORROSION AND AGEING POLYMERIC MATERIALS FOR 1996 GOST 0
PRODUCTS OPERATING IN CONDITIONS OF RADIATION AGEING GENERAL REQUIREMENTS FOR
SELECTION - Incorporating AMD 1: 01/1991
1052 9713 Fancy bakery products. Specifications 1996 GOST 0
1053 26349 Pipeline Connections And Fittings Nominal Pressures Series - Incorporating Amendment 1: 11/1998; Incorporating 1996 GOST 0
Amendment 2: 5/1992
1054 R 50950 Front end loaders with telescopic boom. General specifications 1996 GOST 0
1055 10578 DIESEL ENGINE FUEL PUMPS GENERAL SPECIFICATIONS 1996 GOST 0
1056 R 50903 Canned food. Vegetable sauces. Specifications 1996 GOST 0
1057 R 50997 Mine‫_آ‬s gydrocompass. General specification 1996 GOST 0
1058 28815 Aqueous solutions of wood protective means. Specifications 1996 GOST 0
1059 R 50963 ARMOR PROTECTION OF SPECIAL MOTOR-CARS General technical requirements - Incorporates Amendment 1: 1996 GOST 0
09/1998, Amendment 2: 05/2002
1060 127.1 Sulphur for industrial use. Specification 1996 GOST 0
1061 17327 Bread baking forms. Specifications 1996 GOST 0
1062 814 Iced fish. Specifications 1996 GOST 0
1063 30150 Machines labeller. General technical requirements and test methods 1996 GOST 0
1064 R 50860 "Aircraft and helicopters. Antenna feeder devices of connection, navigation, landing and airtraffic control. General 1996 GOST 0
specification, parameters, methods of measurements"
1065 30319.2 Natural gas. Methods of calculation of physical properties. Definition of compressibility coefficient - Amendment 1:2002 1996 GOST 0
1066 30314 Frozen scallop fillet. Specifications 1996 GOST 0
1067 161 COTTON, MIXED AND CHEMICAL YARN FABRICS DETERMINATION OF GRADE - Incorporates Amendment 1: 1996 GOST 0
9/1987, Amendment 2: 3/1988, Amendment 3: 8/1988, and Amendment 4: 4/1991
1068 16514 Fluid power drives HYDRAULIC CYLINDERS General technical requirements 1996 GOST 0
1069 R 50982 Fire equipment. Specialized fire department tools. General requirements. Test methods 1996 GOST 0
1070 23173 Garden barrows. Specifications 1996 GOST 0
1071 14254 Degrees of protection provided by enclosures (IP code) 1996 GOST 0
1072 R 50981 Hand-holding household pumps. General safety requirements 1996 GOST 0
1073 31.211.42 "Elements and assembly junctions of built-up detachable fixtures forassembly and welding. Technical requirements. 1996 GOST 0
Acceptance rules. Methods of control. Marking, packing, transporation and storage"
1074 11246 Sunflower meal. Specifications 1996 GOST 0
1075 30306 Fruit-stone oil and almond oil. Specifications 1996 GOST 0
1076 R 50905 MOTOR VEHICLES. ELECTRONIC EQUIPMENT GENERAL TECHNICAL REQUIREMENTS 1996 GOST 0
1077 R 50855 Containers for blood and its components. Requirements for chemical and biological safety and methods of testing 1996 GOST 0
1078 12.2.020 Occupational safety standards system Explosion-proof electrical equipment Terms and definitions. Classification. Marking 1996 GOST 0
- Incorporating amendment 1: 8/1979; Amendment 2: 3/1994
1079 14033 Cracker. General specifications 1996 GOST 0
1080 8283 Bent steel hat equal sections. Dimensions 1996 GOST 0
1081 28116 Catering equipment. Distribution containers. Main and joint dimensions and technical requirements 1996 GOST 0
1082 R 50983 Hydraulically operated portable emergency and rescue tools. General technical requirements 1996 GOST 0
1083 30317 Ring shaped crusts. General specifications 1996 GOST 0
1084 R 50927 Waste radioactive bitumenized. General technical requirements 1996 GOST 0
1085 13152 MACHINING FACILITIES BOLTS FOR MACHINE SLOTS - Incorporating Amendment 1: 6/1980; Amendment 2: 1996 GOST 0
3/1988 and Amendment 3: 5/1989
1086 30319.0 Natural gas METHODS FOR CALCULATING PHYSICAL PROPERTIES General provisions - Includes Amendment 1: 1996 GOST 0
11/2002
1087 30402 BUILDING MATERIALS Flammability Test Method 1996 GOST 0
1088 20272 Lining fabrics of chemical threads and yarn. General specifications - Supersedes GOST 20272-83, GOST 7779-75, GOST 1996 GOST 0
9202-87, GOST 20236-87 and GOST 22542-82
1089 8056 Food soyabean meal. Specifications 1996 GOST 0
1090 R 50926 High level solidified waste. General technical requirements 1996 GOST 0
1091 2688 DOUBLE LAY ROPE OF TYPE LK-R OF DESIGN 6X19 (1+6+6/6) +1 o.c. ASSORTMENT - Incorporates Amendment 1996 GOST 0
1: 11/1986 and Amendment 2: 12/1991
1092 30195 Asynchronous submersible motors. General specifications 1996 GOST 0
1093 30316 Lines and equipment for packing liquid foor production. General specifications 1996 GOST 0
1094 9378 Roughness comparison specimens. General specifications 1996 GOST 0
1095 5210 "Rolled sections of tool steel for files, graters, chisels and cape chisels. General specifications" 1996 GOST 0
1096 14922 SILICON DIOXIDE SPECIFICATIONS - Incorporating Amendment 1: 04/1982; Amendment 2: 04/1986; Amendment 3: 1996 GOST 0
05/1987; Amendment 4: 12/1990; Amendment 5: 07/1992
1097 R 50591 GAS-CONSUMING HEATING UNITS INDUSTRIAL GAS TORCHES MAXIMUM ALLOWABLE 1996 GOST 0
CONCENTRATION OF NOx IN COMBUSTION PRODUCTS - Incorporating Amendment 1: 06/96
1098 10312 Photography. Hand-held cameras. Flash-connector dimensions 1996 GOST 0
1099 3071 DOUBLE LAY STEEL ROPE OF TYPE TK OF DESIGN 6X37 (1+6+12+18) +1 o.s. - Incorporates Amendment 1: 1996 GOST 0
04/1992
1100 3916.1 Plywood with outer layers of deciduous veneer for general use. Specifications 1996 GOST 0
1101 8807 Mustard oil. Specifications 1996 GOST 0
1102 R 50864 "Tool-joint tapered thread for drill string elements. Profile,dimensions, technical requirements" 1996 GOST 0
1103 R 50932 Electromagnetic compatibility of technical equipment. Immunity of wire communication equipment to electromagnetic 1996 GOST 0
disturbances. Requirements and test methods
1104 R 50952 DIESEL LOCOMOTIVES ECOLOGICAL REQUIREMENTS. BASIC PROVISIONS 1996 GOST 0
1105 8057 Food soybean cake. Specifications 1996 GOST 0
1106 R 50992 Safety of vehicles undergone the influence of low temperatures. General technical requirements 1996 GOST 0
1107 23833 Refrigerated commercial equipment. General specifications 1996 GOST 0
1108 R 50866 Motor vehicles. Heating systems. Ventilation systems. Air-condition systems. Methods for determination of effeciency and 1996 GOST 0
safety
1109 R 50933 Channels and paths. Regional RRL. Main parameters and measuring methods 1996 GOST 0
1110 21694 Welding mechanical equipment. General technical specifications 1996 GOST 0
1111 R 50936 Services. Repair and maintenance of household radioelectronic apparatus. General specifications 1996 GOST 0
1112 30224 NOVIKOV CYLINDRICAL GEARING WITH TEETH SURFACE HARDNESS OF NO LESS THAN 35 HRC‫_أ‬ 1996 GOST 0
1113 R 50867 Antennas of microwave telecommunication lines. Classification and main technical requirements 1996 GOST 0
1114 30427 GENERAL-PURPOSE PLYWOOD GENERAL RULES OF CLASSIFICATION BY APPEARANCE 1996 GOST 0
1115 R 50993 ROAD VEHICLES. HEATING, VENTILATION AND AIR-CONDITIONING SYSTEMS. EFFICIENCY AND SAFETY 1996 GOST 0
REQUIREMENTS - (SAME AS GOST 30593)
1116 30336 Electromagnetic Compatibility of Technical Equipment IMMUNITY TO PULSE MAGNETIC FIELD Technical 1996 GOST 0
Requirements and Test Methods
1117 R 50571.10 Electrical Installations of Buildings Part 5 SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT Chapter 54 1996 GOST 0
Earthing Arrangements and Protective Conductors
1118 R 50951 EXTERNAL NOISE CREATED BY MAINLINE AND SHUNTING DIESEL LOCOMOTIVES RATED VALUES AND 1996 GOST 0
METHODS OF MEASUREMENT
1119 R 50996 "Collection, storage, treatment and burial of radioactive waste. Terms and definitions" 1996 GOST 0
1120 R 15.011 SYSTEM OF PRODUCTS DEVELOPMENT AND LANCHING INTO MANUFACTURE PATENT INVESTIGATIONS 1996 GOST 0
PROCEDURE AND SCOPE
1121 14635 Steel cold-shaped special profiles for car building. Dimensions 1996 GOST 0
1122 30354 Ring shaped rolls. General specifications 1996 GOST 0
1123 30494 RESIDENTIAL AND PUBLIC BUILDINGS. INDOOR MICROCLIMATE PARAMETERS 1996 GOST 0
1124 R 50891 Machine reducers. General specifications 1996 GOST 0
1125 R 50938 Services. Repaire and maintenance of household electric appliances and equipment. General specifications 1996 GOST 0
1126 19772 Roll-formed steel unequal leg angles. Dimensions 1996 GOST 0
1127 26698.2 Underground drills. General specifications 1995 GOST 0
1128 R 50793 HEXAGON HEAD SCREWS WITH THREADING UP TO HEAD, PRODUCT GRADES A AND B Specifications 1995 GOST 0
1129 857 INDUSTRIAL SYNTHETIC HYDROCHLORIC ACID SPECIFICATIONS 1995 GOST 0
1130 21485 FLUSHING TANKS WITH FITTINGS GENERAL SPECIFICATIONS - Supersedes GOST 21485.0-76, GOST 21485.1- 1995 GOST 0
76, GOST 21485.2-76, and GOST 21485.3-76
1131 R 50802 OIL. METHOD OF DETERMINATION THE HYDROGEN SULFIDE, METHYL AND ETHYL MERCAPTANS 1995 GOST 0
1132 30246 Continuously rolled sheet steel with paint coating for building 1995 GOST 0
1133 20414 Frozen squid cuttle. Specifications 1995 GOST 0
1134 10060.1 CONCRETES BASIC METHOD FOR THE DETERMINATION OF FROST RESISTANCE 1995 GOST 0
1135 16935 Manually and power driven circular revolving tables. General specifications 1995 GOST 0
1136 30167 Resource Saving PROCEDURE FOR ESTABLISHMENT OF RESOURCE SAVING INDICES IN DOCUMENTATION 1995 GOST 0
FOR PRODUCTS
1137 R 50792 HEXAGON HEAD SCREWS WITH THREADING UP TO HEAD, PRODUCT GRADE C Specifications 1995 GOST 0
1138 19910 Domestic gas running water heaters. General specifications 1995 GOST 0
1139 R 50800 Automatic fire fighting foam systems. General technical requirements. Test methods 1995 GOST 0
1140 26698.1 Blast hole drills for opencast mining. General technical conditions 1995 GOST 0
1141 21804 "Shut-off devices for cylinders with liquated gas of pressur 1,6 MPaGeneral specificatios" 1995 GOST 0
1142 27811 Tar pavers. Specifications 1995 GOST 0
1143 22012 MAN-MADE NOISE FROM OVERHEAD POWER LINES AND ELECTRIC SUBSTATIONS Norms and measurement 1995 GOST 0
methods - Incorporating Amendment 1: 2/1987
1144 R 50789 Electromagnetic compatibility of technical equipment. Autotransport alarm systems. Requirements and test methods 1995 GOST 0
1145 26238 Jib bushes. Specifications 1995 GOST 0
1146 11516 Hand tools for life working up to 1000 V d.c. and 1500 V d.c. Generalre quirements and test methods 1995 GOST 0
1147 14169 Systems ground-control monitoring of boring process oil and gasdrill-holes. General technical requirements and test 1995 GOST 0
methods
1148 12.2.092 Occupational safety standards system. Electromechanical and electrical heating equipment for catering. General technical 1995 GOST 0
requirements for security and test methods
1149 2849 Gauges for bevets of instruments. Specifications 1995 GOST 0
1150 R 50783 Power generating sets and mobile electric power stations with internal combustion engines. General technical requirements 1995 GOST 0
1151 30166 Resource Saving BASIC PROVISIONS 1995 GOST 0
1152 R 50810 TEXTILE MATERIALS FIRE SAFETY SOFT FURNISHINGS INFLAMMABILITY TEST METHOD AND 1995 GOST 0
CLASSIFICATION
1153 30136 CARBON STEEL RODS OF REGULAR QUALITY SPECIFICATIONS 1995 GOST 0
1154 21790 Cotton and mixed fabrics for garments. General specifications 1995 GOST 0
1155 10974 Cake of linseeds. Specifications 1995 GOST 0
1156 ISO 7752-5 Overhead travelling and gantry cranes. Controls. Arrangement and Characteristics 1995 GOST 0
1157 1786 Friction linings. General requirements 1995 GOST 0
1158 R 50761 MARINE, LOCOMOTIVE AND INDUSTRIAL DIESEL ENGINES General safety requirements 1995 GOST 0
1159 19597 Garden rake. Specifications 1995 GOST 0
1160 R 50773 Polymer protective coatings for the improvement of radiative situation. Methods used to determine the decontamination 1995 GOST 0
coefficient and time of protective action
1161 15807 Well manometers. General technical requirements and test methods 1995 GOST 0
1162 19598 "Garden hoes, weeders and cultivators. Specifications" 1995 GOST 0
1163 R 50788 INSTALLATIONS FOR THE DIRECT RECEPTION OF TELEVISION PROGRAMS TRANSMITTED BY 1995 GOST 0
SATELLITE Classification. Key parameters. Technical requirements. Methods of measurement
1164 20305 Gauges for tapers 7:24. Specifications 1995 GOST 0
1165 21 Granulated sugar. Specification 1995 GOST 0
1166 R 50779.0 Statistical methods. General 1995 GOST 0
1167 1198 Asbestos brake bands. Specifications 1995 GOST 0
1168 25483 Garden watering-pots. Specifications 1995 GOST 0
1169 25005 Refrigerating equipment. General requirements for pressure determination 1995 GOST 0
1170 R 50763 Public catering. Products of catering. General specifications 1995 GOST 0
1171 R 50760 Gas And Aerosol Analysers for Air Pollution Monitoring General specifications 1995 GOST 0
1172 R 50842 Electromagnetic compatibiliti of radioelectronic equipment. Radio transmitting devices for national economics application. 1995 GOST 0
Limits for spurious emissions. Measurings and monitoring methods
1173 19301.2 Furniture for children under school age. Functional dimensions of chairs 1995 GOST 0
1174 12.2.045 Occupational safety standards sustem. Equipment for the rubber technical products. Safety requirements 1995 GOST 0
1175 23779 Asbestos paper. Specifications 1995 GOST 0
1176 R 50757 AUDIO BROADCASTIING SIGNALS OF PUBLIC AND INDEPENDENT TV AND RADIO COMPANIES, 1995 GOST 0
TRANSMITTED TO PRIMARY DISTRIBUTION PATHS KEY PARAMETERS. MEASUREMENT TECHNIQUES
1177 21639.0 Fluxes for electroslag remelting. General requrements for methods analysis 1995 GOST 0
1178 R 50764 Public catering establishments service. General requirements 1995 GOST 0
1179 R 50765 RADIO-RELAY EQUIPMENT Classification. Key interface-circuit parameters 1995 GOST 0
1180 23706 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 6. Special requirements for 1995 GOST 0
ohmmeters (impedance meters) and conductance meters
1181 21.405 System of Design Documentation for Construction RULES OF DRAWING UP WORKING DOCUMENTATION FOR 1995 GOST 0
HEAT INSULATION OF EQUIPMENT AND PIPELINES
1182 R 50803 Refrigerated bulk milk tanks. General requirements 1995 GOST 0
1183 6490 Line suspension dick insulators. General specifications 1995 GOST 0
1184 9412 Medical gauze. General specifications 1995 GOST 0
1185 23707 Small tools for cultivation of ground. Specifications 1995 GOST 0
1186 R 50830 Sealed radioactive sources. General statements 1995 GOST 0
1187 R 50735 Alternating-current generators from 2 to 30 kW for power take-off from motors of moving means. General specifications 1995 GOST 0
1188 6102 Asbestos cloths. General requirements 1995 GOST 0
1189 R 1.9 State system for standardization of Russian Federation. Procedure of production and service marking by accordance mark 1995 GOST 0
to state standards
1190 30257 Toasted rapeseed meal. Specifications 1995 GOST 0
1191 R 50831 Boiler plant. Heat-mechanical equipment. General technical requirements 1995 GOST 0
1192 30266 Soap laundry bar. General specification 1995 GOST 0
1193 27945 Asphalt mixing plants. Specifications 1995 GOST 0
1194 R 50799 "Electromagnetic compatibity of technical equipment. Immunity of radiocommunications equipment to electrostatic 1995 GOST 0
discharge, impulsive disturbances and dynamic voltage changes in supply networks. Requirements and test methods"
1195 24045 Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications 1995 GOST 0
1196 3514 Colourless optical glass. Specifications 1995 GOST 0
1197 2850 Asbestos millboard. Specifications 1995 GOST 0
1198 22 Refined sugar. Specifications 1995 GOST 0
1199 30124 Scales and scale weighers of continious action. General technical requirements 1995 GOST 0
1200 10851 Friction articles of retinax. Specifications 1995 GOST 0
1201 R 50744 ARMORED CLOTHING Classification and General Technical Requirements - Incorporates Amendment 1: 09/1998, 1995 GOST 0
Amendment 2: 05/2002
1202 27735 Domestic scales. General technical requirements 1995 GOST 0
1203 R 50759 GAS ANALYZERS FOR MONITORING INDUSTRIAL AND TRANSPORT EMISSIONS GENERAL TECHNICAL 1995 GOST 0
SPECIFICATIONS
1204 R 50844 Buses for carrying invalids. General requirements 1995 GOST 0
1205 27149 Soy-bean oilcake as live-stock feed. Specifications 1995 GOST 0
1206 30067 Universal single-bucket excavators full turning. General specifications 1995 GOST 0
1207 R 50829 Safety of radio stations. Radio equipment containing transceivers and their elements. General requirements and test 1995 GOST 0
methods
1208 R 50729 Textiles. Maximum allowable concentration of free formaldehyde - Also Known as GOST 30386 1995 GOST 0
1209 23289 SANITARY WATER-DRAIN FITTINGS SPECIFICATIONS - Supersedes GOST 23412-79 and GOST 4.231-84 1995 GOST 0
1210 18316 Canned food. First course dinner dishes. Specifications 1995 GOST 0
1211 1437 DARK PETROLEUM PRODUCTS ACCELERATED METHOD FOR DETERMINATION OF SULFUR - Incorporates 1994 GOST 0
Amendments 1:05/1981, Amendment 2:061987, and Amendment 3:02/1993
1212 8.038 STATE SYSTEM FOR ENSURING THE UNIFORMITY OF MEASUREMENTS STATE CALIBRATION SYSTEM 1994 GOST 0
FOR TOOLS INTENDED FOR SOUND PRESSURE MEASURUREMENTS IN AIR MEDIA IN FREQUENCY
RANGE 2 HZ TO 100 KHZ
1213 27457 Commercial washing machines. General specifications 1994 GOST 0
1214 1349 Canned milk. Dry cream. Specifications - Incorporating Amendment 1: 2/1986, Amendment 2: 6/1990, Amendment 3: 1994 GOST 0
9/1991, Corrigendum: 1991
1215 6822 Chocolate butter. Specifications - Incorporating Amendment 1: 10/1981; Amendment 2: 11/1986; Amendment 3: 9/1988, 1994 GOST 0
Amendment 4: 11/1990
1216 R 50650 Domestic siphons. Safety requirements and test methods 1994 GOST 0
1217 9414.1 BLACK COAL AND ANTHRACITE METHODS FOR THE PETROGRAPHIC ANALYSIS Part 1. VOCABULARY 1994 GOST 0
1218 27840 Containers for parcels and printed matters. General specifications 1994 GOST 0
1219 4230 Garden knives. Specifications 1994 GOST 0
1220 23170 PACKING FOR ENGINEERING INDUSTRY PRODUCTS GENERAL REQUIREMENTS - Incorporates Amendment 1: 1994 GOST 0
6/1985
1221 9572 Petroleum benzene. Specifications 1994 GOST 0
1222 25309 COVERS OF SHIP COMPANION HATCHES SPECIFICATIONS 1994 GOST 0
1223 22379 Medical gauze-cotton products. Specifications 1994 GOST 0
1224 12.2.007.3 OCCUPATIONAL SAFETY STANDARD SYSTEM. ELECTROTECHNICAL DEVICES WITH VOLTAGES MORE 1994 GOST 0
THAN 1 000 V - Incorporating Amendment 1: 06/1978, Amendment 2: 12/1982; Amendment 3: 1987; Amendment 4:
2000
1225 12.2.007.9 Safety in electroheat installations. Part 1. General requirements 1994 GOST 0
1226 4570 Sweets. General specifications 1994 GOST 0
1227 8765 Fur and combined clothes. General specifications 1994 GOST 0
1228 4156 Garden cutter knives. Specifications 1994 GOST 0
1229 12027 "Sustallations of heat exchangers with plate exchangers for food liquids. Technical requirements, safety requiremens" 1994 GOST 0
1230 30064 "Spindel noses of drilling, boring and milling machines. Dimensions. Technical requirements" 1994 GOST 0
1231 30035 Scrapers. General specifications 1994 GOST 0
1232 9305 "Profile convex, concave milling and corner rounding g cutters. Specifications" 1994 GOST 0
1233 9043 Electric appliances for hair-cutting. General specifications 1994 GOST 0
1234 4154 Pruning shears. Specifications 1994 GOST 0
1235 R 50657 Electromagnetic compatibility of radioelectronic equipment. Radio transmitting devices of all types and purposes for 1994 GOST 0
national economic use. Limits for frequency tolerances. Measuring and monitoring methods
1236 R 50721 Knitted fabrics and garments. Methods for determination of type and mass fraction of raw materials - Also Known as 1994 GOST 0
GOST 30387
1237 22371 Pulped and broken fruits and berries with sugar. Specifications - Incorporating Amendment 2: 9/1985, Amendment 3: 1994 GOST 0
12/1987, Amendment 4: 1/1989, Amendment 5: 11/1990
1238 13196 Devices for automation of tank farms. Means for level measurement and sampling of oil products. General technical 1994 GOST 0
requirements and test methods
1239 16277 "Plates of separate fastening for railway P50, P65 and P75 rails. Specifications" 1994 GOST 0
1240 30247.1 ELEMENTS OF BUILDING ‫_أ‬ONSTRUCTIONS FIRE RESISTANCE TEST METHODS LOADBEARING AND 1994 GOST 0
SEPARATING ELEMENTS
1241 12049 DIRECT CURRENT MOTORS FOR FLOOR TRACKLESS MACHINES OF ELECTRIFIED TRANSPORT GENERAL 1994 GOST 0
SPECIFICATIONS - Incorporates Amendment 1: 01/1983, Amendment 2: 01/1986, Amendment 3: 06/1987
1242 17440 Snipe nose pliers. Specifications 1994 GOST 0
1243 12.2.132 Occupational safety standards system. Oil field equipment. Safety general requirements 1994 GOST 0
1244 12098 COLZA FOR PROCESSING - Specifications - Incorporating Amendment 1: 03/1987, Amendment 2: 12/1991 1994 GOST 0
1245 4153 Pruning shears. Specifications 1994 GOST 0
1246 10138 "Pure linen, linen and half-linen fabrics for bed-linen and underwear. Specifications" 1994 GOST 0
1247 12.4.101 Occupational safety standards system. Industrial overalls for limited protection from toxical substances. General technical 1994 GOST 0
demand and methods for determination
1248 5949 GAGE CORROSION-RESISTANT, HEAT-RESISTANT AND HIGH-TEMPERATURE PROFILED STEEL 1994 GOST 0
SPECIFICATIONS - Incorporates Amendment 1: 07/1980, Amendment 2: 12/1986, and Amendment 8: 11/1990
1249 25242 Digital instruments to measure immittance parameters. General technical requirements and methods of tests 1994 GOST 0
1250 14694 COMPLETE METAL-CLAD SWITCHGEARS FOR VOLTAGE UP TO 10 kV TEST METHODS - Incorporating 1994 GOST 0
Amendment 1: 09/1981; Amendment 2: 06/1986 and Amendment 3: 11/1990
1251 12095 SESAME FOR PROCESSING Specifications - Incorporating Amendment 1: 03/1987; Amendment 2: 12/1991 1994 GOST 0
1252 21805 "Pressure regulators for liquated gas of pressure 1,6 MPa. General specifications" 1994 GOST 0
1253 R 50644 Tourist-excursion service. Requirements provided for tourist‫_آ‬s and excursionist‫_آ‬s security 1994 GOST 0
1254 19440 METALLIC POWDERS APPARENT DENSITY DETERMINATION Part 1. FUNNEL METHOD Part 2. SCOTT 1994 GOST 0
VOLUMETER METHOD
1255 15530 Ducks and double-threads. General specifications 1994 GOST 0
1256 12852.0 CELLULAR CONCRETE - GENERAL REQUIREMENTS FOR TEST METHODS 1994 GOST 0
1257 R 50723 Laser safety. General requirements for development and operation the laser products 1994 GOST 0
1258 23286 CABLES, WIRES AND CORDS Norms of insulation and sheath thickness and voltage tests - Incorporating 1994 GOST 0
Corridendum:1992,AMD 1:07,1981; AMD 2: 06,1985; AMD 3: 06,1990
1259 1415 Ferrosilicium. Specification and conditions of delivery 1994 GOST 0
1260 8541 Socks and stockings made on seamless hosiery machines. General specifications 1994 GOST 0
1261 27336 Concrete pump. General specifications 1994 GOST 0
1262 22266 SULFATE-RESISTANT CEMENTS SPECIFICATIONS 1994 GOST 0
1263 16427 Medical gauze napkins and cuts. Specifications 1994 GOST 0
1264 R 50662 Oxygen concentrators for medical use. Safety requirements 1994 GOST 0
1265 R 50228 Eastern flour sweets. Specifications 1994 GOST 0
1266 R 50651 Gas cylinders for domestic siphons. Safety requirements and test methods 1994 GOST 0
1267 30244 BUILDING MATERIALS COMBUSTIBILITY TEST METHODS 1994 GOST 0
1268 16371 Furniture. General specifications 1994 GOST 0
1269 7081 Silk and semi-silk pile sheets. General specifications 1994 GOST 0
1270 7473 CONCRETE MIXES SPECIFICATIONS 1994 GOST 0
1271 12871 Chrysotile asbestos. General specifications 1994 GOST 0
1272 12852.5 CELLULAR CONCRETE - Method of steam permeability factor determination 1994 GOST 0
1273 8519 Jesel high-pressure fuel lines and connections. General specifications 1994 GOST 0
1274 26983 Darnitsky bread. Specifications - Incorporating Amendment 1: 1/1987, Amendment 2: 12/1991 1994 GOST 0
1275 20690 ELECTRICAL EQUIPMENT FOR AC VOLTAGE OF 750 kV REQUIREMENTS FOR INSULATION STRENGTH - 1994 GOST 0
Incorporating Amendment 1: 05/1979; Amendment 2: 08/1981; Amendment 3: 06/1986; Amendment 4: 09/1987;
Amendment 5: 10/1989; Amendment 6: 1990
1276 14050 Limestone meal (dolomit). Specifications 1994 GOST 0
1277 25094 ACTIVE MINERAL CEMENT ADDITIVES TEST METHODS 1994 GOST 0
1278 16264.0 Low-power electric machines. Motors. General specifications - Incorporates Amendment 1: 02/1989 Amendment 2: 1994 GOST 0
06/1990
1279 10512 Magnetic and electromagnetic separators. General technical requirements 1994 GOST 0
1280 21149 Oat flakes. Specifications 1994 GOST 0
1281 400 Glass thermometers for testing of petroleum products. Specifications - Incorporating Amendment 1: 3/1982, Amendment 2: 1994 GOST 0
12/1986, Amendment 3: 12/1987, Amendment 4: 6/1989, Amendment: 7/1991
1282 R 50569.2 Dental rotary instruments. Diamond instruments. Specifications. Test methods 1994 GOST 0
1283 12852.6 Cellular concrete. Method of hygroscopic moisture determination 1994 GOST 0
1284 10884 THERMOMECHANICALLY HARDENED REINFORCING STEEL FOR FERROCONCRETE STRUCTURES 1994 GOST 0
SPECIFICATIONS
1285 12088 TEXTILES AND ITS PRODUCTS - METHOD OF DETERMINATION OF THE PERMEABILITY TO AIR - 1994 GOST 0
Incorporating Amendment 1: 11/1983, Amendment 2: 08/1988
1286 12.1.018 Occupational safety standard system. Fire and explosion safety of static electricity. General requirements 1994 GOST 0
1287 1179 "Packets bandaging, medical. Specifications" 1994 GOST 0
1288 25518 Tractors agricultural machines and trailers. Coupling heads of pneumatic drive of brake systems. Zones of arrangement 1994 GOST 0
1289 16844 Vibration. Requirements for testing mechanical hammers 1994 GOST 0
1290 R 50669 Mobile inventory buildings of metal or with metal frame power supply and electrical safety for street trade and household 1994 GOST 0
services. Specification
1291 12257 Sodium chlorate for industrial use. Specifications 1994 GOST 0
1292 27338 Concrete mixing plant. General specifications 1994 GOST 0
1293 R 50680 Automatic water fire fighing systems. General technical requirements. Methods of tests 1994 GOST 0
1294 R 34.11 INFORMATION TECHNOLOGY CRYPTOGRAPHIC PROTECTION OF INFORMATION HASH FUNCTION 1994 GOST 0
1295 17293 Ferrotungsten. Specification and conditions of delivery 1994 GOST 0
1296 5813 "Fan V-belts and pulleys for engines of cars, tractors and combines. Specifications" 1994 GOST 0
1297 26984 Stolichny bread. Specifications - Incorporating Amendment 1: 1/1987, Amendment 2: 12/1991 1994 GOST 0
1298 16920 Manometric thermometers and temperature transducers. General technical requirements and methods of test 1994 GOST 0
1299 21128 POWER SUPPLY SYSTEMS, ELECTRIC ENERGY NETWORKS, SOURCES, CONVERTERS AND CURRENT- 1994 GOST 0
USING EQUIPMENT RATED VOLTAGE TO 1000 V - Incorporating Amendment 1: 05/1990
1300 30196 CASING HEADS Types, key parameters and mounting dimensions 1994 GOST 0
1301 6616 Thermoelectric converters. General specifications 1994 GOST 0
1302 R 50638 Electromagnetic compatibility of technical equipment. Semicondactor microvawe oscillator devices and modules. List of 1994 GOST 0
EMC parameters and requirements for them. Methods of measurement
1303 10354 POLYETHYLENE FILM SPECIFICATIONS - Incorporating Amendment 1: 07/1986, Amendment 2: 11/1987, 1994 GOST 0
Amendment 3: 06/1991, Amendment 4: 12/1992, Amendment 5: 02/1999
1304 608 "Canned meat. ""Poultry meat in gel"". Specifications" 1994 GOST 0
1305 R 50713 PRODUCTS FOR INFANTS AND TODDLERS GENERAL SPECIFICATIONS 1994 GOST 0
1306 2224 Steel thimbles for steel wire ropes. Specifications 1994 GOST 0
1307 12301 Cartons of paperboard, paper and composite materials. General specifications - Incorporating Amendment 1: 12/1983, 1994 GOST 0
Amendment 2: 3/1987, Amendment 3: 8/1989
1308 10131 Cases of wood and wooden materials for food-stuffs, agricultural products and matches. Specifications - Incorporating 1994 GOST 0
Corrigendium: 1996
1309 8673 Plywood panels. Specifications 1994 GOST 0
1310 19917 Furniture for seating and lying. General specifications 1994 GOST 0
1311 R 50670 GAS-OPERATED INDUSTRIAL EQUIPMENT AIR HEATERS GENERAL TECHNICAL REQUIREMENTS 1994 GOST 0
1312 R 50714 Artificial leather for personal safety facilities. General specifications 1994 GOST 0
1313 20010 Gloves rubber industrial. Specifications 1994 GOST 0
1314 20845 Frozen shrimps. Specifications - Incorporating Amendment 1: 8/1981, Amendment 2: 7/1985, Amendment 3: 7/1992 1994 GOST 0
1315 27614 Cement trucks. General specifications 1994 GOST 0
1316 9433 GREASE TSIATIM-221 (TSIATIM-221) Specifications - Incorporating Amendment 1: 8/1982; Amendment 2: 4/1986; 1993 GOST 0
Amendment 3: 4/1991
1317 R 50610 "Special containers. Types, basic parameters and dimensions" 1993 GOST 0
1318 1425 LEAF SPRINGS FOR RAILWAY VEHICLES SPECIFICATIONS - Incorporating Amendment 1: 1997; Amendment 2: 1993 GOST 0
1999
1319 11532 NUTS FOR RAIL TRACK JOINT BOLTS SPECIFICATIONS 1993 GOST 0
1320 12574 GRANULATED AND REFINED SUGAR Ash Test Methods 1993 GOST 0
1321 R 50588 Foaming agents for fire extinguishing. General technical requirements and test methods 1993 GOST 0
1322 20723 Fabrics for dresses from natural twisted silk. Specifications 1993 GOST 0
1323 R 50607 ELECTROMAGNETIC COMPATIBILITY OF TECHNICAL EQUIPMENT ELECTRICAL EQUIPMENT FOR 1993 GOST 0
MOTOR VEHICLES. DISTURBANCE FROM ELECTROSTATIC DISCHARGES REQUIREMENTS AND TEST
METHODS
1324 6292 Rice Specifications 1993 GOST 0
1325 2.123 Unifited system for design documentation. Sets of design documents for printing plates under automated design 1993 GOST 0
1326 24370 Packets of paper and composite materials. General specifications - Incorporating Amendment 1: 1/1985, Amendment 2: 1993 GOST 0
2/1986, Amendment 3: 4/1991
1327 10979 Fish preserves. Special salted saury. Specifications - Incorporating Amendment 1: 12/1989 1993 GOST 0
1328 R 50516 POLYMERIC MEMBRANES METHOD FOR DETERMINATION OF FLAT MEMBRANE BUBBLE POINT 1993 GOST 0
1329 R 50576 Feather and down consumer goods. Specifications 1993 GOST 0
1330 R 50267.14 Medical electrical equipment. Part 2. Particular requirements for the safety of electroconvulsive therapy equipment 1993 GOST 0
1331 13529 SELF-ACTING INDIVIDUAL CIRCULAR VALVES FOR PISTON COMPRESSORS TYPES AND FITTING 1993 GOST 0
DIMENSIONS
1332 15899 1, 1, 2, 2-TETRAFLOURDIBROMETHANE (CHLADONE 114‫_ذ‬2). Specifications 1993 GOST 0
1333 R 50602 WHEELCHAIRS MAXIMUM OVERALL DIMENSIONS 1993 GOST 0
1334 27339 Truck mixer. General specifications 1993 GOST 0
1335 127.3 SULPHUR FOR INDUSTRIAL USE SAMPLING AND SAMPLES PREPARATION 1993 GOST 0
1336 R 50566 Steel wire for mechanical springs. General requirements 1993 GOST 0
1337 R 50632 HIGH-CONCENTRATION HYDROGEN PEROXIDE SPECIFICATIONS - Incorporating Amendment 1: 01/00; 1993 GOST 0
Amendment 2: 07/05
1338 9414.3 BITUMINOUS COAL AND ANTHRACITE METHODS OF THE PETROGRAPHIC ANALYSIS Part 3. METHOD OF 1993 GOST 0
DETERMINING MACERAL GROUP COMPOSITION
1339 21889 Man-Machine System HUMAN-OPERATOR SEAT General ergonomic requirements - Incorporating Amendment 1: 1993 GOST 0
4/1982
1340 5582 CORROSION-RESISTANT, HEAT-PROOF, AND HEAT-RESISTANT THIN-SHEET ROLLED STOCK. Specifications 1993 GOST 0
- Incorporates Amendment 1: 07/1979, Amendment 2: 12/1986, Amendment 3: 05/1990, and Amendment 4: 09/1991
1341 25835 HOISTING CRANES OPERATION MODE CLASSIFICATION OF MECHANISMS - Incorporates Amendment 1: 1993 GOST 0
11/1991
1342 14901 Press-moulds for manufacture of industrial rubber articles. General specifications 1993 GOST 0
1343 8865 ELECTRICAL INSULATION SYSTEMS HEAT RESISTANCE EVALUATION AND CLASSIFICATION - IEC 1993 GOST 0
85:1984
1344 11030 MOTOR GRADERS GENERAL SPECIFICATIONS - Incorporates Amendment 1:1998 1993 GOST 0
1345 10110 DIAMOND SAWS 1A1R SPECIFICATIONS - (CMEA Standard 5906-87) 1993 GOST 0
1346 30095 GLASS CONTAINERS TERMS AND DEFINITIONS OF DEFECTS 1993 GOST 0
1347 9450 MICROHARDNESS MEASUREMENT BY DIAMOND POINT INDENTATION - Incorporating Amendment 1: 09/81; 1993 GOST 0
Amendment 2: 10/91
1348 21631 Sheets out of aluminium and aluminium alloys - Incorporating Amendment 1: 5/1982, Amendment 2: 1/1987, Amendment 1993 GOST 0
3: 6/1988
1349 22380 Fixative shaped bandage. Specifications 1993 GOST 0
1350 22782.6 EXPLOSION-PROOF ELECTRICAL EQUIPMENT OF EXPLOSION PROTECTION TYPE 1993 GOST 0
â__EXPLOSIONIMPERMEABLE ENCLOSUREâ__ TECHNICAL REQUIREMENTS AND TEST METHODS -
(SMEA Standard 3140-81); Incorporates Amendment 1: 05/1982, Amendment 2: 03/1984, Amendment 3: 12/1986, and
Am
1351 R 50524 Peas shelled for consumption in the fresh form. Specifications 1993 GOST 0
1352 12029 FURNITURE: CHAIRS AND STOOLS Strength and durability - Incorporating Amendment 1: 12/2008 1993 GOST 0
1353 11530 RAIL TRACK JOINT BOLTS SPECIFICATIONS 1993 GOST 0
1354 R 50530 "Cartridges for portable fire-arms, firing devices of industrial and trade special purposes. Types and methods of control 1993 GOST 0
during safety certificating tests"
1355 30226 FOOTWEAR COTTON AND SYNTHETIC THREADS SPECIFICATIONS 1993 GOST 0
1356 8777 Wooden barrels for liqiud and dry products. Technical requirements - Incorporating Amendment 1: 9/1983, Amendment 2: 1993 GOST 0
12/1985, Amendment 3: 6/1991
1357 4295 Wooden crates for sheet glass. Specifications - Incorporating Amendment 1: 7/1983, Amendment 2: 5/1986, Amendment 3: 1993 GOST 0
9/1991
1358 21.501 SYSTEM OF DESIGN DOCUMENTATION FOR CONSTRUCTION RULES FOR EXECUTION OF 1993 GOST 0
ARCHITECTURAL WORKING DRAWINGS
1359 3480 POWER SHAFTS OF AGRICULTURAL TRACTORS AND DRIVEN AGRICULTURAL MACHINES TYPES AND 1993 GOST 0
KEY PARAMETERS - (CMEA Standard 4460-83, CMEA Standard 4461-83, CMEA Standard 5820-86); In place of
GOST 3480-58 and GOST 16124-70; Incorporates Amendment 1: 11/1984 and Amen
1360 16372 ROTATING ELECTRICAL MACHINES PERMISSIBLE NOISE LEVELS 1993 GOST 0
1361 9414.2 METHODS FOR THE PETROGRAPHIC ANALYSIS OF BITUMINOUS COAL AND ANTHRACITE Part 2 METHOD 1993 GOST 0
OF PREPARING COAL SAMPLES
1362 19245 PERAMBULATORS General specifications 1993 GOST 0
1363 1583 Aluminium Foundry alloys. Specifications 1993 GOST 0
1364 R 50611 Organic-mineral fertilizer. Specifications 1993 GOST 0
1365 30062 BAR REINFORCEMENT FOR REINFORCED CONCRETE STRUCTURES. Eddy-Current Method For Testing Of 1993 GOST 0
Strength Characteristics
1366 R 1.4 "State system for standardization of Russian Federation. Branch standards, company standards of scientific technical and 1993 GOST 0
another public communities. Total concepts"
1367 R 50599 STEEL WELDED PRESSURE VESSELS AND DEVICES NONDESTRUCTIVE CHECK DURING OPERATION AND 1993 GOST 0
MANUFACTURE
1368 5521 ROLLED STEEL FOR SHIPBULDING. Specifications - Incorporating Amendment 1: 11/02 1993 GOST 0
1369 25779 TOYS GENERAL SAFETY REQUIREMENTS AND MONITORING METHODS - Incorporating Amendment 1: 6/1992; 1993 GOST 0
Amendment 2: 08/2001: Corrigendum: 2003
1370 R 50570 ELECTRIC INDUSTRIAL RAILLESS TRUCKS. OPERATORâ__S SEAT GENERAL ERGONOMIC 1993 GOST 0
REQUIREMENTS
1371 10550 TEXTILE MATERIALS. CLOTHS. METHODS OF FLEXURAL RIGIDITY DETERMINATION 1993 GOST 0
1372 21996 COLD-ROLLED HEAT TREATED STEEL STRIP SPECIFICATIONS - Incorporates Amendment 1: 12/1982, 1993 GOST 0
Amendment 2: 06/1987, Amendment 3: 08/1989, and Amendment 4: 12/1991
1373 21513 PAINT MATERIALS METHODS FOR DETERMINTION OF WATER-AND MOISTURE ABSORPTION BY PAINT 1993 GOST 0
FILM - Incorporating Amendment 1: 07/1986 and Amendment 2: 09/1991
1374 R 50612 Machines and equipment for munufacturing of sugar. Safety requirements 1993 GOST 0
1375 262 RUBBER DETERMINATION OF TEAR STRENGTH (TROUSER, ANGLE AND CRESCENT TEST PIECES) 1993 GOST 0
1376 127.4 Ground sulphur for rubber products and rubbers. Specifications 1993 GOST 0
1377 10705 ELECTRICALLY WELDED STEEL PIPES SPECIFICATIONS - Incorporating Amendment 1: 12/1986; Amendment 2: 1993 GOST 0
12/1987; Amendment 3: 6/1989; Amendment 4: 7/1991
1378 23652 TRANSMISSION OILS SPECIFICATIONS - Incorporating Amendment 1: 3/1981; Amendment 2: 4/1982; Amendment 3: 1993 GOST 0
3/1983; Amendment 4: 1/1984; Amendment 5: 1/1988; Amendment 6: 7/1989, Amendment 7: 6/1992 and Amendment 8:
1999
1379 R 50509 MARKING OF INSULATED CONDUCTORS 1993 GOST 0
1380 10702 ROLLED STOCK OF HIGH QUALITY STRUCTURAL CARBON AND ALLOYED STEEL FOR COLD EXTRUSION 1993 GOST 0
AND UPSETTING SPECIFICATIONS - Incorporates Amendment 1: 06/1985 and Amendment 2: 11/1989
1381 R 50620 Machinery and equipment for bread baking industry. Safety requirements 1993 GOST 0
1382 5985 PETROLEUM PRODUCTS METHOD FOR DETERMINATION OF ACIDITY AND ACID NUMBER - Incorporates 1993 GOST 0
Amendments 1 and Amendment 2: 04/1984; Incorporated Corrigendum 1: 08/1984 and Corrigendum 2: 04/1992; CMEA
Standard 3963-83
1383 24297 INCOMING CONTROL OF PRODUCTS BASIC PROVISIONS 1993 GOST 0
1384 8509 Hot-rolled steel equal-leg angles. Dimensions 1993 GOST 0
1385 2.001 Unifited system of design documentation. General principles 1993 GOST 0
1386 9045 COLD-ROLLED LOW-CARBON HIGHQUALITY SHEET STEEL FOR COLD STAMPING SPECIFICATIONS - 1993 GOST 0
Printed: 1996
1387 7968 Fresh cauliflower for state purchases, deliveries and retail - Incorporating Amendment 1: 11/1990 1993 GOST 0
1388 R 50351.2 Dental root canal instrument. Part 2. Enlargers 1993 GOST 0
1389 R 50629 Special form radioactive material. General technical requirements and test methods 1993 GOST 0
1390 22615 "Man-Machine" System TUMBLER SWITCHES AND SELECTORS General ergonomic requirements 1993 GOST 0
1391 R 50507 Friction brake products. General requirements 1993 GOST 0
1392 30055 POLYMERIC AND COMBINED ROPES SPECIFICATIONS - Incorporating Amendment 1: 2004 1993 GOST 0
1393 7890 TRAVELLING SINGLE-GIRDER SUSPENDED CRANES SPECIFICATIONS 1993 GOST 0
1394 R 50633 Pheumatic charging valves of flying vehicle. Types and general technical requirements 1993 GOST 0
1395 R 50557 HYDRAULING FLUID POWER FLUID SAMPLE CONTAINERS QUALIFYING AND CONTROLLING CLEANING 1993 GOST 0
METHODS
1396 30030 ISOLATING TRANSFORMERS AND SAFETYPE ISOLATING TRANSFORMERS TECHNICAL REQUIREMENTS 1993 GOST 0
1397 26271 FLUX-CORED WIRE FOR ARC WELDING OF CARBON AND LOWALLOYED STEELS GENERAL 1993 GOST 0
SPECIFICATIONS - Incorporates Amendment 1: 08/1991
1398 5422 HOT-ROLLED SPECIAL STEEL SECTIONS FOR TRACTORS SPECIFICATIONS - Incorporates Amendment 1: 1993 GOST 0
07/1975 and Amendment 2: 03/1988
1399 2679 Slitting and cut-off cutters. Specifications 1993 GOST 0
1400 8713 HIDDEN ARC WELDING. WELDED JOINTS Basic types, design elements and dimensions - Incorporating Amendment 1993 GOST 0
1: 08/1986; Amendment 2: 01/1989; Amendment 3: 07/1990; Includes Corrigendum: 2007
1401 18475 COLD-WORKED ALUMINUM AND ALLUMINUM ALLOY PIPES SPECIFICATIONS - Incorporates Amendment 1: 1993 GOST 0
6/1988; Includes Amendment 2 and Corrigendum: 2004
1402 18360 SHEET SNAP-GAGES FOR DIAMETERS FROM 3 TO 260 mm Dimensions 1993 GOST 0
1403 15844 Glass bottles for milk and milk products. Specifications 1992 GOST 0
1404 R 50463 Pit single props. General technical requirements 1992 GOST 0
1405 R 50352 Dental rotary instruments. Test methods 1992 GOST 0
1406 R 50162 Gasoline brush-saws. Circular saw-blades. General technical requirements. Method of test. Marking and designation 1992 GOST 0
1407 19092 Buckwheat. Requirements for state purchases and deliveries 1992 GOST 0
1408 R 1.0 State system for standardization of the Russian Federation. Basic principles 1992 GOST 0
1409 29275 Dietary canned fish in sauces. Specifications 1992 GOST 0
1410 16098 WELDED JOINTS MADE OF CLAD CORROSION-RESISTANT STEEL Basic Types, Design Elements and 1992 GOST 0
Dimensions - Incorporating Amendment 1: 02/1989
1411 R 50447 Luminaires for lighting of aquariums. General specifications 1992 GOST 0
1412 1759.2 Bolts, screws and studs. Surface defects and methods of control 1992 GOST 0
1413 22645 BELT-TYPE COVNEYORS ROLLER CARRIAGE Types and basic dimensions - Incorporates Amendment 1: 06/1980; 1992 GOST 0
Amendment 2: 02/1988
1414 25506 TEXTILE SHEETS TERMS AND DEFINITIONS OF FAULTS - Incorporating Amendment 1: 6/1987 1992 GOST 0
1415 209 RUBBER AND ADHESIVES METHODS FOR DETERMINATION OF ADHESION WITH METAL WHEN TEARING. 1992 GOST 0
- Incorporates Amendment 1:08/1978, Amendment 2: 03/1983, Amendment 3: 05/1989 and Amendment 4: 07/1990
1416 R 50409 Medium expansions foam-making branch pipes. Specifications 1992 GOST 0
1417 R 50339.3 Low-voltage fuses. Part 3. Supplementary requirements for fuses for household use 1992 GOST 0
1418 22644 Belt-type conveyors Key parameters and dimensions - Incorporates Amendment 1: 01/1980; Amendment 2: 02/1988 1992 GOST 0
1419 R 50339.2 Low-voltage fuses. Part 2-1. Supplementary requirements for fuses for industrial application. Section 1-3 1992 GOST 0
1420 R 50408 Foammixers. Specifications 1992 GOST 0
1421 R 1.5 "State system for standardization of the Russian Federation. General requirements for lay-out, formulation, presentation and 1992 GOST 0
contents of standards"
1422 15125 Cord-polystyrene insulated high-frequency balanced communication cables. Specifications 1992 GOST 0
1423 R 50335 "Organic-mineral fertilizer ""Biohumus"". Specifications" 1992 GOST 0
1424 12.2.131 Occupational safety standards system. Forging machines. Safety requirements 1992 GOST 0
1425 12623 FLAT UNBEADED BOTTOMS Basic dimensions - Incorporating Amendment 1: 10/1983 1992 GOST 0
1426 1172 Medical gauze bandinges. Specifications 1992 GOST 0
1427 29298 Cotton and mixed domestic fabrics. General specifications 1992 GOST 0
1428 718 Preserved milk products. Cacao with condensed milk and sugar. Specifications - Incorporating Amendment 1: 6/1986, 1992 GOST 0
Amendment 2: 6/1990
1429 R 50366 Dry food concentrates. Semi-processed dry flour-products. Specifications 1992 GOST 0
1430 R 50364 Food concentrates. Instant coffee substitutes drinks. Specifications 1992 GOST 0
1431 R 50193.1 Measurement of water flow in closed conduits. Meters for cold potable water. Specifications 1992 GOST 0
1432 27468 Heat and mass exchange equipment of stationary distillation desalting plants. Specifications 1992 GOST 0
1433 2105 FORGED AND PRESSED HOOKS SPECIFICATIONS - Incorporates Amendment 1: 02/1981, Amendment 2: 12/1981, 1992 GOST 0
Amendment 3: 12/1984, Amendment 4: 11/1986, Amendment 5: 09/1987, Amendment 6: 07/1988, and Amendment 7:
11/1990
1434 4248 Asbestos cement non-arcing boards for electrical purposes. Specifications 1992 GOST 0
1435 2583 Batteries of cylindrical manganese-zinc cells based on electrolyte. Specification 1992 GOST 0
1436 29276 Cannned fish for children food. Specifications 1992 GOST 0
1437 6321 ENGINE FUEL FUEL TEST ON COPPER PLATE - Incorporated Corrigendum 1: 10/1998; Same as ISO 2160-85 1992 GOST 0
1438 12.3.027 Occupational safety standards system. Foundry work. Safety requirements 1992 GOST 0
1439 R 50109 NONMETALLIC MATERIALS TEST METHOD FOR MASS LOSS AND CONTENT OF VOLATILE 1992 GOST 0
CONDENCABLE SUBSTANCES UNDER VACUUM-THERMAL EFFECT
1440 2081 Carbamid. Specifications 1992 GOST 0
1441 12620 CONICAL UNBEADED BOTTOMS WITH AN APEX ANGLE OF 60, 90 and 120 Degrees. Basic dimensions - 1992 GOST 0
Incorporating Amendment 1: 10/1983
1442 29312 Antibodies and antigens for laboratory diagnosis of foot-and-mouth disease. Specifications 1992 GOST 0
1443 9 Aqueous ammonia for industrial use. Specifications 1992 GOST 0
1444 18224 Canned foods. Second course dinner dishes Specifications - Incorporating Amendment 1: 4/1982, Amendment 2: 8/1983, 1992 GOST 0
Amendment 3: 6/1988, Amendment 4: 7/1990
1445 R 50257 Complete mixed feed for pigs. General specifications 1992 GOST 0
1446 949 SMALL AND MEDIUM VOLUME STEEL GAS CYLINDERS FOR Pw Less than or equal to 19.6 MPa (200 kgf/cm2) 1992 GOST 0
Specifications - Incorporatins Amendment 1: 10/1976; Amendment 2: 10/1980; Amendment 3: 2/1982; Amendment 4:
6/1986; Amendment 5: 2001; Corrigendum: 2002
1447 29311 Pancreatic hydrolyzates for bacterial nutrient media. General specifications 1992 GOST 0
1448 7845 Broadcasting Television System Key Parameters. Measurement Methods 1992 GOST 0
1449 R 50398 Fire hydraulic elevator. Specifications 1992 GOST 0
1450 R 50230 Eastern sweeties of soft sweetmeat type. Specifications 1992 GOST 0
1451 R 50272 PREVAILING TORQUE TYPE HEXAGON ALL-METAL NUTS Property classes 5, 8, 10 and 12 Specifications 1992 GOST 0
1452 R 50460 MARK OF CONFORMITY FOR MANDATORY CERTIFICATION FORM, DIMENSIONS AND TECHNICAL 1992 GOST 0
REQUIREMENTS
1453 R 50046 Hoisting cranes. Safety requirements for hydraulic equipment - Amendment 1: 02/27/2002 1992 GOST 0
1454 29328 Stationary gas turbines for turbogenerators. General technical requirements 1992 GOST 0
1455 R 50458 Devices for oil and oil products loading into rail cars. General technical requirements and test methods 1992 GOST 0
1456 12621 CONICAL UNBEADED BOTTOMS WITH APEX ANGLE OF 140 DEGREES Basic dimensions - Incorporating 1992 GOST 0
Amendment 1: 10/1983
1457 R 50400 Hose branching. Technical requirements 1992 GOST 0
1458 29333 Fluorinated hydrocarbons for industrial use. Determination of non-volatile residue 1992 GOST 0
1459 29329 Balance for static weighing. General requirements 1992 GOST 0
1460 29297 WELDING, BRAZING, SOLDERING AND BRAZE WELDING OF METALS. Lists And Conventional Numbers Of 1992 GOST 0
Processes
1461 12622 FLAT BEADED BOTTOMS Basic dimensions - Incorporating Amendment 1: 10/1983 1992 GOST 0
1462 R 50401 Suction gauzes. Specifications 1992 GOST 0
1463 R 50302 Regrindale superhard material (composite) tipped cartridges for toolholders. Specifications 1992 GOST 0
1464 R 50402 "Safety devices for fuel gases and oxigen or compressed air for gas welding, cutting and allied processes. Definitions, 1992 GOST 0
general requirements and testing methods"
1465 12619 FLANGED CONICAL BOTTOMS WITH APEX ANGLES OF 60 and 90 Degrees Basic Dimensions - Incorporating 1992 GOST 0
Amendment 1: 10/1983
1466 R 50326 "Basic aspects of the safety philosophy of electrical equipment, used in medical practice" 1992 GOST 0
1467 6827 ELECTRIC EQUIPMENT AND ELECTRIC ENERGY RECEIVERS Series of rated currents - Incorporates Amendments 1992 GOST 0
1: 03/1979; Amendment 2: 08/1990; Incorporated Corrigendums: 04/1979 and 11/1990
1468 R 1.2 State system for standardization of the Russian Federation. Procedure for developing state standarts 1992 GOST 0
1469 12.2.016.2 Occupational safety standards system. CoMpression equipment. Noise characteristics determination method of stationary 1991 GOST 0
compressor sets
1470 28923 Temperatures regulators operating without outside energy source. General technical requirements and methods of test 1991 GOST 0
1471 29045 Spices. Pimento or allspice. Specifications 1991 GOST 0
1472 12.2.125 Occupational safty standards system. Surface wireline equipment. Safety requirements 1991 GOST 0
1473 10006 Metal tubes - Tensile test method - ISO 6892:1984; Incorporating Amendment 1: 12/1985, Amendment 2: 07/1987, 1991 GOST 0
Amendment 3: 10/1989, Amendment 4: 12/1990
1474 9411 Colored optical glass. Specifications 1991 GOST 0
1475 24376 Semiconductor inverters. General specifications 1991 GOST 0
1476 12.2.003 OCCUPATIONAL SAFETY STANDARDS SYSTEM INDUSTRIAL EQUIPMENT GENERAL SAFETY 1991 GOST 0
REQUIREMENTS
1477 12.1.003 Occupational safety standards system. Noise. General safety requirements - Incorporates Amendment 1: 12/1988 1991 GOST 0
1478 4759 Ferromolybdenum. Specifications and conditions of delivery 1991 GOST 0
1479 15506 All-cast moulding boxes of aluminium and magnesium alloys. Technical requirements 1991 GOST 0
1480 24005 Natural circulation stationary power steam boilers. General technical requirements - Incorporating Amendment 1: 12/1981; 1991 GOST 0
Amendment 2: 12/1984; Amendment 3: 08/1988 and Amendment 4: 03/1990
1481 29188.0 "Perfumery and cosmetics. Acceptance rules, sampling and methods of organoleptic testing" 1991 GOST 0
1482 13950 Welded and folded steel barrels (drums) with crimps on casing. Specifications 1991 GOST 0
1483 25296 Sewing underwear articles. General specifications 1991 GOST 0
1484 4756 Ferrosilicomanganese. Technical requirements and conditions of delivery 1991 GOST 0
1485 25912.0 REINFORCED CONCRETE SLABS FOR AERODROME PAVEMENT. SPECIFICATIONS 1991 GOST 0
1486 17305 Wire of carbon constructional steel. Specifications 1991 GOST 0
1487 18710 Domestic electric mixers. General specifications 1991 GOST 0
1488 20180 Radioizotope densitometers for liquid and pulp measuring. General specifications 1991 GOST 0
1489 29056 Spices. Caraway seed. Specifications 1991 GOST 0
1490 969 Alumina and high alumina cements. Specifications 1991 GOST 0
1491 12.2.016.1 Occurational safety standards system. Compressing equipment. Determination of noise characteristics. General requirments 1991 GOST 0
1492 26877 Metal products METHODS OF MEASURING VARIATION IN SHAPE 1991 GOST 0
1493 29027 Moisture meters for solid and dry substances. Specifications and testing methods 1991 GOST 0
1494 28915 "Laser beam impulse welding. Button welds. Main types, design elements and dimensions" 1991 GOST 0
1495 19622 Unidirectional restrictor valves of flying vehicle hydraulic systems. Types and technical requirements 1991 GOST 0
1496 29266 HOISTING CRANES ACCURACY REQUIREMENTS FOR PARAMETERS MEASUREMENT DURING TESTING - 1991 GOST 0
:1989
1497 20.57.406 COMPREHENSIVE SYSTEM OF QUALITY CONTROL ITEMS OF ELECTRONIC ENGINEERING, QUANTUM 1991 GOST 0
ELECTRONICS AND ELECTRICAL ENGINEERING TEST METHODS - Incorporates Amendment 1: 1981;
Amendment 2: February 1982, Amendment 3: March 1982, Amendment 4: October 1983, Amendmen
1498 12.3.046 Occupational safety standards system. Automatic fire fighting systems. General technical requirements 1991 GOST 0
1499 29112 Solid culture media (for veterinary aims). Specifications 1991 GOST 0
1500 29187 Fruit and berries quick-frozen. General specifications 1991 GOST 0
1501 4755 Ferromanganese. Technical requirements and conditions of delivery 1991 GOST 0
1502 29188.3 Cosmetics. Methods for determination of emulsion stability 1991 GOST 0
1503 12.1.023 OCCUPATIONAL SAFETY STANDARDS SYSTEM NOISE METHODS OF ESTABLISHMENT OF NOISE 1991 GOST 0
CHARACTERISTIC VALUES FOR STATIONARY MACHINES - Incorporating Amendment 1: 09/86; Amendment 2:
06/88
1504 18677 SEALS Design and dimensions - Incorporating Amendment 1: 9/1977; Amendment 2: 2/1979; Amendment 3: 3/1981; 1991 GOST 0
Amendment 4: 1/1983; Amendment 5: 3/1988; Amendment 6: 2001
1505 29024 Turbodimetric and nephelometric analysers of liquid. General technical requirements and testing methods 1991 GOST 0
1506 19807 TITANIUM AND WROUGHT TITANIUM ALLOYS GRADES 1991 GOST 0
1507 23366 SERIES OF DC AND AC RATED VOLTAGES - Incorporating Amendment 1: 02/1988 1991 GOST 0
1508 29168 Building mast freight hoists. Specifications 1991 GOST 0
1509 20287 PETROLEUM PRODUCTS METHODS FOR DETERMINATION OF POUR POINT AND SOLIDIFICATION POINT - 1991 GOST 0
Supersedes GOST 25262-82
1510 37 Butter. Specifications 1991 GOST 0
1511 3347 Centrifugal pumps for liquid milk products. General specifications 1991 GOST 0
1512 17411 Positive-displacement hydraulic drives. General technical requirements 1991 GOST 0
1513 11823 Lift check values for Pnom < or = 25 MPA (250 KGF/SM2). General specifications 1991 GOST 0
1514 13515 Boxes of packaging flat pasted board for butter and margarine. Specifications 1991 GOST 0
1515 15170 "Canned meat ""Chopped beef"". Specifications" 1991 GOST 0
1516 29015 Hydraulic drives. General test methods 1991 GOST 0
1517 17933 MACHINE TAPS WITH SCREW FLUTES DESIGN AND DIMENSIONS - Incorporating Amendment 1: 1973, 1991 GOST 0
Amendment 2: 1980, and Amendment 3: 1989
1518 19905 Hardware Strengthening by Surface Chemical Thermal Treatment Contents of general requirements 1991 GOST 0
1519 29188.2 COSMETICS METHOD FOR DETERMINATION OF HYDROGEN ION CONCENTRATION (pH) 1991 GOST 0
1520 12.2.002.6 Occupational safety standard system AGRICULTURAL TRACTORS AND SELF-PROPELLED MACHINERY Test 1991 GOST 0
method for cabin pressurization
1521 24885 Centrifugal separators for liquids. General technical conditions 1991 GOST 0
1522 13512 Boxes made of corrugated board for confectionery. Specifications 1991 GOST 0
1523 25295 Outerwear coat-suit assortment. General spesifications 1991 GOST 0
1524 28904 The control systems of electrostatic precipitators. The general technical requirements and the methods of tests 1991 GOST 0
1525 12.2.013.0 Occupational safety standards system. Electric hand-held tools. General safety requirements and testing methods 1991 GOST 0
1526 29055 Spices. Coriander. Specifications 1991 GOST 0
1527 25192 CONCRETES. CLASSIFICATION AND GENERAL TECHNICAL REQUIREMENTS - Incorporating Amendment 1: 1991 GOST 0
5/1990
1528 29097 Corsets. General specifications 1991 GOST 0
1529 29124 Data input keyboard. General technical requirements 1991 GOST 0
1530 12.2.002 Occupational Safety Standards System AGRICULTURAL MACHINERY Methods of Safety Evaluation 1991 GOST 0
1531 29092 Cilindrical milling cutters. Specifications 1991 GOST 0
1532 6388 Tooth-brushes. General specifications 1991 GOST 0
1533 19863.4 Titanium alloys. Methods of Tungsten Determination 1991 GOST 0
1534 9.914 Unified System of Protection against Corrosion and Ageing CORROSION-RESISTANT AUSTENITIC STEELS 1991 GOST 0
Electrochemical methods for intergranular-corrosion resistance
1535 24716 Dichloramine for industrial. Specifications 1991 GOST 0
1536 29053 Spices. Chilli or capsicum paprika ground. Specification 1991 GOST 0
1537 9857 DUCK COTTON AND MIXED FABRICS FOR RUBBERIZED HOSES SPECIFICATIONS 1991 GOST 0
1538 28997 Inductor and transformer cores for telecommunication. Part 1. Generic specification 1991 GOST 0
1539 28996 Wellhead Oil-Field Equipment Terms and Definitions 1991 GOST 0
1540 15.009 System of product development and launching into manufacture. Non-food consumer goods 1991 GOST 0
1541 29014 Pneumatic drives. General test methods 1991 GOST 0
1542 15987 Wooden bodied planes. Specifications 1991 GOST 0
1543 29054 Spices. Star anise. Specifications 1991 GOST 0
1544 12.2.053 Occupational safety standards system. Stacker-cranes. Safety requirements 1991 GOST 0
1545 12.2.002.5 Occupational safety standard system AGRICULTURAL TRACTORS AND SELF-PROPELLED MACHINERY Test 1991 GOST 0
method for the heating and environmental systems characteristics at the operator seat in the cold season
1546 25294 Outerwear dress-blouse assortment. General specifications 1991 GOST 0
1547 25575 GAGES FOR TRAPEZOIDAL THREADED CONNECTIONS OF CASING PIPES AND THEIR COUPLINGS Types, 1991 GOST 0
basic dimensions and tolerances - Incorporating Amendment 1: 7/1986 and Amendment 2: 1/1988
1548 28927 Synchronous machines using hydrogen as a coolant. Application and operation rules. Technical requirements 1991 GOST 0
1549 29046 Spiger. Ginces. Specifications 1991 GOST 0
1550 12.2.016.3 Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of mobile 1991 GOST 0
compressor stations
1551 22703 MOULDED PIECES OF AUTOMATIC COUPLER FOR 1520 mm GAUGE RAILWAY ROLLING STOCK GENERAL 1991 GOST 0
SPECIFICATIONS
1552 23581.19 IRON ORES, CONCENTRATES, AGGLOMERATES AND PELLETS METHODS OF PHOSPHORUS 1991 GOST 0
DETERMINATION - ISO 2599: 1983
1553 22587 Cotton pickers. General technical requirements 1991 GOST 0
1554 14014 "Digital instruments and measuring transducers of voltage, current and resistance. General technical requirements and 1991 GOST 0
methods of tests"
1555 4761 Ferrotitanium. Specifications and conditions of delivery 1991 GOST 0
1556 13556 Building tower cranes. General specifications 1991 GOST 0
1557 28668.1 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES Part 2 PARTICULAR REQUIREMENTS 1991 GOST 0
FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS) - :1987
1558 12.4.183 System of safety standards. Materials for means of hands protection. Specifications 1991 GOST 0
1559 12.2.002.4 Occupational safety standards system AGRICULTURAL TRACTORS AND SELF-PROPELLED MACHINERY Test 1991 GOST 0
method for operatorâ__s field of vision
1560 26596 Non adjustable face milling cutters with indexable hardmetal inserts tobe cottered. Specifications 1991 GOST 0
1561 23338 Welding of metals. Methods for determination of diffusible hydrogen in deposited weld metal and fused metal 1991 GOST 0
1562 28932 Drawing devices. General technical requirements and test methods 1991 GOST 0
1563 12.2.016.4 Occupational safety standards system. Compressing equipment. Determination method of noise characteristics of stationary 1991 GOST 0
compressor stations and installations
1564 15877 Canned sugar corn. Specifications - Incorporating 1: 2/1984, Amendment 2: 6/1990 1991 GOST 0
1565 29047 Spices. Clove. Specifications 1991 GOST 0
1566 29188.4 PRODUCTS COSMETIC METHOD OF DEFINITION OF WATER AND FLYING SUBSTANCES OR DRY 1991 GOST 0
SUBSTANCE
1567 3213 Electrode pitch coke. Specifications 1991 GOST 0
1568 11861 Ferrosilicochromium. Specification and conditions of delivery 1991 GOST 0
1569 19816.1 BUTADIEN-STYRENE RUBBER DETERMINATION OF THE CONTENT OF ORGANIC ACIDS AND SOAPS 1991 GOST 0
THEREOF - (ISO 7781):1986
1570 29121 Carbon steel wire for elevator ropes. Specifications 1991 GOST 0
1571 26738 Blad cultivators. General technical requirements 1991 GOST 0
1572 19804 FERROCONCRETE PILES SPECIFICATIONS - Supersedes GOST 19804.0-78 1991 GOST 0
1573 12.1.005 OCCUPATIONAL SAFETY STANDARDS SYSTEM - GENERAL SANITARY-HYGIENIC REQUIREMENTS FOR 1991 GOST 0
WORKING AREA AIR - Incorporating Amendment 1: 2000
1574 18460 Pneumatic drives. General technical requirements 1991 GOST 0
1575 12.2.016.5 "Occupational safety standards system. Compressing equipment. Noise characteristics and antinoise protection. Lay-out ( 1991 GOST 0
composition, formulation, contents ) of technical documentation"
1576 19671 Tungsten wire for light sources. Specifications 1991 GOST 0
1577 28933 Drawing devices. General technical requirements and test methods 1991 GOST 0
1578 11515 Sound broadcasting channels and Paths Key Quality parameters Methods of Measurement 1991 GOST 0
1579 26246.14 Foil-clad electrical insulating materials for manufacture of printed plates. Prepreg for use as bonding sheet material in the 1991 GOST 0
fabrication of multilayer printed boards. Specifications
1580 29048 "Spices. Nutmeg, papua type. Specifications" 1991 GOST 0
1581 29057 Men‫_آ‬s overalls for protection from non-toxic dust. Specifications 1991 GOST 0
1582 26213 SOILS METHODS FOR DETERMINATION OF ORGANIC SUBSTANCE 1991 GOST 0
1583 9736 Electric apparatus of direct transformation for measuring non-electrical values. General technical requirments and metods 1991 GOST 0
of tests
1584 21616 Strain gauges. General specifications 1991 GOST 0
1585 10141 Rod and ball mills. General technical requirements 1991 GOST 0
1586 3251 Rubber textile. Specifications 1991 GOST 0
1587 816 Stewed fruits. Specifications 1991 GOST 0
1588 6665 Concrete and reinforced concrete curbs. Specifications 1991 GOST 0
1589 29226 Viscosimeters of liquid. General technical requirements and testing methods 1991 GOST 0
1590 4775 Concentric-lay-stranded copper-clad steel (bimetallic) conductors. Specifications 1991 GOST 0
1591 29188.1 PRODUCTS COSMETIC METHOD OF DEFINITION OF TEMPERATURE 1991 GOST 0
1592 10704 ELECTRIC LINE WELDED STEEL TUBES RANGE OF SIZES 1991 GOST 0
1593 28957 Machinery for forestry. Winches. Performance requirements 1991 GOST 0
1594 29058 Women‫_آ‬s overalls for protection from non-toxis dust. Specifications 1991 GOST 0
1595 6937 Cone crushers. General technical requirements 1991 GOST 0
1596 29049 Spices. Cinnamon. Specifications 1991 GOST 0
1597 5283 "Canned meat ""Boiled beef in its own juice"". Specifications" 1991 GOST 0
1598 12.2.002.3 Occupational Safety Standards System AGRICULTURAL AND FORESTRY VEHICLES Determination of Braking 1991 GOST 0
Characteristics
1599 24779 PNEUMATIC TYRES PACKING, TRANSPORTATION, STORAGE - Incorporates Amendments 1:12/1988 and 1991 GOST 0
Amendment 2:05/1990; CMEA Standard 1492-79
1600 28919 FLANGE CONNECTIONS OF WELLHEAD EQUIPMENT TYPES, KEY PARAMETERS AND DIMENSIONS 1991 GOST 0
1601 28988 "Fluid power systems. Vibration characteristics, vibration tests" 1991 GOST 0
1602 29052 Spices. Cardamon. Specifications 1991 GOST 0
1603 7885 INDUSTRIAL CARBON FOR THE PRODUCTION OF RUBBER SPECIFICATIONS - Incorporates Amendment 1: 1991 GOST 0
03/1988 and Amendment 2: 04/1990
1604 28922 OILFIELD PORTABLE PUMPING UNITS TYPES AND KEY PARAMETERS 1991 GOST 0
1605 12.2.042 Occupation safety standards system. Machines and techological equipment for live-stok-raising and forage production. 1991 GOST 0
General safety requirements
1606 17608 Footway concrete slabs. Specifications 1991 GOST 0
1607 29050 Spices. Black and white pepper. Specifications 1991 GOST 0
1608 29065 Tanks for milk and milk products. General specifications 1991 GOST 0
1609 12318 "Canned meat "" Meat paste "". Specification" 1991 GOST 0
1610 31.2031.02 Readjustable built-up detachable fixtures for assembly of elements bewelded. Technical specifications 1991 GOST 0
1611 29122 Individual protection facilities. Requirements for stitches and seams 1991 GOST 0
1612 13252 SWING CHECK GATES FOR NOMINAL PRESSURE PN â_¤ 25 MPa (250 kgf/cm2). General Specifications 1991 GOST 0
1613 29271 Video tape-recorder cassettes. General specifications 1991 GOST 0
1614 2.503 Unified System of Design Documentation AMENDMENT RULES - Includes Amendment 1: 02/2006, Corrigendum: 2007, 1990 GOST 0
and Corrigendum: 2009
1615 12028 Canned fish. Sardines in oil. Specifications - Incorporating Amendment 1: 3/1989 1990 GOST 0
1616 26368 Medical luminaries. General technical requirements and test methods 1990 GOST 0
1617 28600 Shearers. Basic parameters and dimensions. General technical requirements 1990 GOST 0
1618 28848 PLAIN WASHERS. EXTRA LARGE SERRIES PRODUCT GRADE C 1990 GOST 0
1619 9201 Rotory polygonal screen. Technical requirement 1990 GOST 0
1620 10277 Putties. Specifications 1990 GOST 0
1621 28792 HOISTING CRANES INFORMATION TO BE PROVIDED. GENERAL PROVISIONS - :1989 1990 GOST 0
1622 9.707 UNIFIED SYSTEM OF PROTECTION AGAINST CORROSION AND AGING POLYMERIC MATERIALS 1990 GOST 0
METHODS FOR ACCELERATED CLIMATIC AGING TEST - Incorporates Amendment 1: 07/1989
1623 28723 Velocity electromagnetic and vortex flowmeters. General technical requirements and test methods 1990 GOST 0
1624 28762 Throw away (indexable) cutting superhard inserts. Specifications 1990 GOST 0
1625 28840 "Mashines tension, press and bending materials. General technical requirements" 1990 GOST 0
1626 12492.15 Agricultural machinery. Bevelled strip section. Dimensions 1990 GOST 0
1627 12766.1 High electric resistance wire of precision alloys. Specifications 1990 GOST 0
1628 28759.3 ABUT WELDED STEEL FLANGES OF VESSELS AND DEVICES. Design and Dimensions 1990 GOST 0
1629 12.2.071 Occupational safety standards system. Hoisting cranes. Container cranes. Safety requirements 1990 GOST 0
1630 12766.2 Strip of high electric resistance precision alloys. Specifications 1990 GOST 0
1631 16962.2 ELECTRICAL PRODUCTS Test methods for the determination of resistance to exposure to ambient mechanical stresses - 1990 GOST 0
Includes Amendment: 2013
1632 11047 Wood details and articles for one-two storey dwelling and public buildings. Specifications 1990 GOST 0
1633 1937 Black unbroken tea in bulk. Specifications 1990 GOST 0
1634 28841 Mashines for fatigue testing of materials. General technical requirements 1990 GOST 0
1635 28724 Velocity gas meters. General technical requirements and test methods 1990 GOST 0
1636 12.2.017.3 Occupational safety standards system. Straightening machines. Safety requirements 1990 GOST 0
1637 8607 Luminaires for domestic and public interior lighting. General specifications - Incorporating Amendment 1: 10/1983, 1990 GOST 0
Amendment 2: 9/1987, Amendment 3: 6/1988
1638 8517 Means of automation for grindling. General specifications 1990 GOST 0
1639 28439 Digital equipment of fibre-optic power line transmission systems. General specification 1990 GOST 0
1640 28501 Dried stone-fruits. Specifications 1990 GOST 0
1641 28538 "Kvas wort concentrate, kvas concentrates and extracts. Specifications" 1990 GOST 0
1642 6221 Technical liquid ammonia. Specifications 1990 GOST 0
1643 28682 Luminaires portable for garden use. General specifications 1990 GOST 0
1644 28602.3 Combined flexible materials for electrical insulation. Specifications 1990 GOST 0
1645 28759.2 FLAT WELDED STEEL FLANGES OF VESSELS AND DEVICES Design and Dimensions 1990 GOST 0
1646 15842 Canned green peas. Specifications - Incorporating Amendment 1: 11/1996 1990 GOST 0
1647 28761 Hydraulic drives. Hydraulic semi-rotary actuators. General technical requirements 1990 GOST 0
1648 28836 Strain gauge load cells. General technical requirements and testings methods 1990 GOST 0
1649 28535 Equipment for automatic chemical washing for dairy industry and dairy systems. Key parameters and general requirements 1990 GOST 0
1650 18611 Canned food. Sliced vegetables in tomato sauce. General specifications - Incorporating Amendment 1: 6/1974, Amendment 1990 GOST 0
2: 6/1979, Amendment 3: 7/1983, Amendment 4: 2/1990
1651 28424 Cattle embryos. Specifications 1990 GOST 0
1652 5274 Knitted scarves. General specification 1990 GOST 0
1653 24037 ASBESTOS-POLYMERIC SEALING SHEET MATERIALS METHOD OF DETERMINATION OF RESISTANCE TO 1990 GOST 0
LIQUIDS EFFECT - CMEA Standard 1220-78
1654 12492.0 Agricultural machinery. Round steel. General specifications 1990 GOST 0
1655 15.311 System of product development and launching into manufacture. Launching products into manufacture in accordance with 1990 GOST 0
foreign companies technical documentation
1656 19223 Electro-optical range-finders. General specifications 1990 GOST 0
1657 6047 Floodlights for general lighting purposes. General specifications 1990 GOST 0
1658 23638 Green plants silage. Specifications 1990 GOST 0
1659 2283 COLD - ROLLED RIBBON MADE OF TOOL AND SPRING STEEL SPECIFICATIONS - Incorporates Amendment 1: 1990 GOST 0
11/1981, Amendment 2: 02/1986, Amendment 3: 08/1986, and Amendment 4: 07/1990
1660 28674 Pea. Requirements for state purchases and deliveries 1990 GOST 0
1661 28534 "Tracks for meat industry. Main parameters, dimensions and specifications" 1990 GOST 0
1662 28438 Disk milling cutter with mechanically clamped indexable inserts. Specifications 1990 GOST 0
1663 13634 Corn. Requirements for state purchaeses and deliveries 1990 GOST 0
1664 19781 INFORMATION PROCESSING SYSTEMS SOFTWARE TERMS AND DEFINITIONS - In Place of GOST 19781-83 1990 GOST 0
and GOST 19.004-80
1665 28759.8 Metal gaskets of octangular section. Design and dimensions. Technical requirements 1990 GOST 0
1666 28870 STEEL TENSILE TEST METHODS FOR ROLLED PLATES IN THICKNESS DIRECTION 1990 GOST 0
1667 28673 Oats. Requirements for state purchases and deliveries - Incorporating Amendment 1: 1995 1990 GOST 0
1668 28533 "Mincers‫ _آ‬cutting tool. Types, main dimensions and specifications" 1990 GOST 0
1669 28499 Syrups. General specifications 1990 GOST 0
1670 28594 "Domestic radioelectronic equipment. Package, marking, transportation and storage" 1990 GOST 0
1671 28719 Shell type helical end mills with indexable carbide inserts. Specifications 1990 GOST 0
1672 10540 Knitted bathing goods. General specifications 1990 GOST 0
1673 13298 Tyres with regulated pressure. Specifications 1990 GOST 0
1674 1759.0 "Bolts,screws,studs and nuts. Specifications" - (CMEA Standard 4203-83); Incorporates Amendment 1: 10,1989 1990 GOST 0
1675 25452 High pressure rubber hoses spiral wire reinforced without assembly. Specifications 1990 GOST 0
1676 494 Brass tubes. Specifications 1990 GOST 0
1677 9862 Fish preserves. Special salted herring. Specifications 1990 GOST 0
1678 21815.18 Image intensifier and image converter tubes. Modulation franster function 1990 GOST 0
1679 28437 Disk milling cutter with mechanically clamped indexable inserts. Types and basic dimensions 1990 GOST 0
1680 28759.1 FLANGES OF VESSELS AND DEVICES Types and Parameters 1990 GOST 0
1681 23637 Haylage. Specifications 1990 GOST 0
1682 28818 Abrasive grains from aluminium oxide. Specifications 1990 GOST 0
1683 19663 Isothermal reservoirs for liquid carbon dioxide. General technical requirements 1990 GOST 0
1684 28759.7 Asbestos-metal gaskets. Design and dimensions. Technical requirements 1990 GOST 0
1685 28672 Barley. Requirements for state purchaeses and deliveries 1990 GOST 0
1686 1066 Brass wire. Specifications 1990 GOST 0
1687 16225 END MILLING CUTTERS FOR LIGHT ALLOYS PROCESSING Design and dimensions - Incorporating Amendment 1: 1990 GOST 0
1988
1688 6008 Metallic manganese and nitrated manganese. Specifications 1990 GOST 0
1689 28581 Mechanical and electric typewriters. General requirements and test methods 1990 GOST 0
1690 28532 Meat mincers. General specifications 1990 GOST 0
1691 24038 ASBESTOS-POLYMERIC SEALING SHEET MATERIALS COMPRESSIBILITY AND RECOVERABILITY TEST 1990 GOST 0
1692 19497 Chill die casting machines. General specifications 1990 GOST 0
1693 28759.6 Non-metal gaskets. Design and dimensions. Technical requirements - Revised Edition 1990 GOST 0
1694 15876 Cauges for wood and wood material wares. Specifications 1990 GOST 0
1695 25942 Tractors and machinery for agriculture. Quick-connective devies. Construction requirements 1990 GOST 0
1696 13309 Copy-books. Specifications 1990 GOST 0
1697 26646 Stationary distillation desalting units. General technical requirements and acceptance 1990 GOST 0
1698 28546 Toilet soap. General specifications 1990 GOST 0
1699 28503 Fur-lined garments. General specifications 1990 GOST 0
1700 28459 The universal 0286 test-chart for monochrome and colour picture tubes and TV sets. General technical requirements 1990 GOST 0
1701 8024 APPARATUS AND ELECTRIC DEVICES DESIGNED FOR ALTERNATING VOLTAGES ABOVE 1000 V TEST 1990 GOST 0
METHODS AND HEATING NORMS FOR LONG-TERM OPERATING MODES
1702 28759.4 ABUT WELDED STEEL FLANGES OF VESSELS AND DEVICES DESIGNED FOR OCTAGONAL GASKETS 1990 GOST 0
Design and Dimensions
1703 12.2.046.0 System of labour safety standards. Technological foundry equipment. Safety requirements 1990 GOST 0
1704 14693 Unsealed metal-enclosed switchgear and controlgear for voltages up to 10 kV. General specifications 1990 GOST 0
1705 28881 Dry bread sticks. General specifications 1990 GOST 0
1706 6144 TRAM-CAR AXLES SPECIFICATIONS 1990 GOST 0
1707 28725 Instruments for measuring the level of liquids and loose materials. General technical requirements and test methods 1990 GOST 0
1708 1939 Packed baykh green tea. Specifications 1990 GOST 0
1709 28775 Gas pumping units driven with gas turbine. General specifications 1990 GOST 0
1710 12766.4 Graded rolled steel of precision alloys of high electric resistance. Specifications 1990 GOST 0
1711 1016 Canned food. Stuffed vegetables in tomato sauce. Specifications 1990 GOST 0
1712 7454 "Canned fish in oil (blanched, slightly dried or cured). Specification" 1990 GOST 0
1713 5267.0 HOT-ROLLED SECTIONS FOR CAR-BUILDING General Specifications 1990 GOST 0
1714 12.2.017.4 Occupational safety standards system. Sheet-bending presses. Safety requirements 1990 GOST 0
1715 1938 Packed baykh black tea. Specifications 1990 GOST 0
1716 28867 Floor coverings and machine-made non-woven carpet gools. General specifications 1990 GOST 0
1717 15979 Canned podded beans. Specifications - Incorporating Amendment 1: 12/1978, Amendment 2: 4/1984, Amendment 3: 1990 GOST 0
12/1988
1718 12766.3 Precision gauged alloys of high electric resistance. Specifications 1990 GOST 0
1719 26482 PRELIMINARY REDUCED IRON ORES, CONCENTRATES, AGGLOMERATES AND PELLETS METHOD FOR 1990 GOST 0
DETERMINATION OF METALLIC IRON - :1984
1720 28433 Rack stacker cranes. General specification 1990 GOST 0
1721 7419 Steel hot-rolled products for springs. Range 1990 GOST 0
1722 13862 "Blowout preventer equipment. Tipical schemes, basic parameters and technical construction requirements" 1990 GOST 0
1723 28444 Luminaires portable child-appealing. General specifications 1990 GOST 0
1724 28502 Dried seed bearing fruits. Specifications 1990 GOST 0
1725 28603 Apparatus for short-wave therapy. General technical requirements and test methods 1990 GOST 0
1726 28684 Surgical cutters. General technical requirements and test methods 1990 GOST 0
1727 19125 CONNECTING PARTS OF PIPE CONNECTIONS OF AIRCRAFT INSTRUMENTS DESIGN AND DIMENSIONS 1990 GOST 0
1728 10616 Radial and axial fans. Dimensions and parameters 1990 GOST 0
1729 18696 Thermoelectric radionuclide generators. Types and general technical requirements 1990 GOST 0
1730 28462 Caravans and light trailers. Vacuum braking systems. General technical requirements 1990 GOST 0
1731 10921 AERODYNAMIC TEST METHODS FOR RADIAL AND AXIAL FANS 1990 GOST 0
1732 26673 Turbo-drills. Basic parameters and dimensions 1990 GOST 0
1733 28695 "Aseptic tanks. Main parameters, dimensions and technical requirements" 1990 GOST 0
1734 28507 Safety leather shoes for mechanical action. General specifications 1990 GOST 0
1735 28554 Knitted fabrics. General specifications 1990 GOST 0
1736 5976 Radial fans for general use. General specifications 1990 GOST 0
1737 28736 Fodder roots. Specifications 1990 GOST 0
1738 14250.1 FERROTITANIUM TITANIUM DETERMINATION METHOD 1990 GOST 0
1739 7600 Forging and pressing equipment. General specifications 1990 GOST 0
1740 10667 SHEET ORGANIC GLASS SPECIFICATIONS 1990 GOST 0
1741 10180 Concretes. Methods for strength determination using reference specimens 1990 GOST 0
1742 7350 CORROSION-RESISTANT, HEAT-RESISTANT, AND HIGH-TEMPERATURE STEEL PLATE SPECIFICATIONS - 1990 GOST 0
CMEA Standard 6434-88; Incorporates Amendment 1: 11/1987, Amendment 2: 06/1988, and Amendment 3: 10/1989
1743 28547 Refrigerating compressors of positive displacement type. Methods of testing 1990 GOST 0
1744 28693 Production equipment for meat and poultry processing industry. Sanitary requirements 1990 GOST 0
1745 18200 ROTARY ELECTRICAL MACHINES OF POWER OVER 200 kW. SYNCHRONOUS ENGINES General specifications 1990 GOST 0
1746 28460 Combined feeding-stuffs for wildfowl. Specifications 1990 GOST 0
1747 28505 Skins of beaver bressed. Specifications 1990 GOST 0
1748 10174 Polyurethane foam filler strips for windows and doors. Specifications 1990 GOST 0
1749 1208 Pressed bronze tubes. Specifications 1990 GOST 0
1750 16536 Wooden boxes for automotive industry products. Specifications 1990 GOST 0
1751 8799 Starters for tubular fluorescent lamps. Specifications 1990 GOST 0
1752 12766.5 Flattened strip of high electric resistance precision alloys. Specifications 1990 GOST 0
1753 11442 General-purpose asxial fans. General specification 1990 GOST 0
1754 28434 Overhead travelling stacker cranes. General specification 1990 GOST 0
1755 14806 ARC WELDING OF ALUMINUM AND ALUMINUM ALLOYS IN INERT GASES. WELDED JOINTS BASIC 1990 GOST 0
TYPES, DESIGN ELEMENTS AND DIMENSIONS - Incorporates Amendment 1: 10/1989
1756 28733 Metal cutting machine tools. Chip disposal conveyors. Basic dimensions and technical requirements 1990 GOST 0
1757 28887 Flower pollen (beebread). Specifications 1990 GOST 0
1758 28785 Ultracentrifuges and rotors preparative. General technical requirements and test methods 1990 GOST 0
1759 7993 "Canned meat ""Tongues"". Specifications" 1990 GOST 0
1760 34.003 Information technology Set of standards for automated systems AUTOMATED SYSTEMS Terms and definitions 1990 GOST 0
1761 28556 Outboard engines. Types. Basic parameters. General technical requirements 1990 GOST 0
1762 28516 Soil working rotary blades. General technical requirements 1990 GOST 0
1763 28698 Small salted fish. Specifications 1990 GOST 0
1764 28487 Tool-joint tapered thread for drill string elements. Profile. Dimensions. Tolerances 1990 GOST 0
1765 5267.2 Z-SECTION Dimensions 1990 GOST 0
1766 11065 JET FUEL CALCULATION METHOD FOR LOW SPECIFIC HEAT VALUE DETERMINATION 1990 GOST 0
1767 28435 End mills with mechanically clamped indexable inserts. Basic dimensions 1990 GOST 0
1768 8286 Canned meat with porridge. Specifications 1990 GOST 0
1769 6271 Diamond dies. Specifications 1990 GOST 0
1770 19904 Cold-rolled steel sheets. Dimensions 1990 GOST 0
1771 19338 SYNTHETIC RUBBER METHOD OF DEFINITION OF WEIGHT LOSS AT DRYING - (SMEA 1694):1989 1990 GOST 0
1772 19.701 Unified system of program documentation DATA, PROGRAM AND SYSTEM FLOWCHARTS, PROGRAM 1990 GOST 0
NETWORK CHARTS AND SYSTEM RESOURCES CHARTS DOCUMENTATION SYMBOLS AND
CONVENTIONS FOR FLOWCHARTING - Same as ISO 5807:1985
1773 28518 Medical chisels. General technical requirements and test methods 1990 GOST 0
1774 28807 Rye and bolted bread. General specifications 1990 GOST 0
1775 617 Copper tubes. Specifications 1990 GOST 0
1776 17745 STEELS AND ALLOYS. Methods of determination of gas content 1990 GOST 0
1777 28648 Crane wheels. Specifications 1990 GOST 0
1778 28703 Automatic and semiautomatic instruments for indirect measurement of arterial pressure. General technical requirements and 1990 GOST 0
test methods
1779 28564 Refrigerating systems using positive displacement compressor. Methods of testing 1990 GOST 0
1780 5267.3 Z-SECTION FOR CENTER SILL Dimensions 1990 GOST 0
1781 10922 WELDED REINFORCING AND EMBEDDED PARTS, WELDED JOINTS OF REINFORCEMENT AND EMBEDDED 1990 GOST 0
PARTS FOR REINFORCED CONCRETE STRUCTURES GENERAL SPECIFICATIONS
1782 17323 Engine fuel. Method for determination of mercaptan and hydrosulfide sulfur content by potentiometric titration - (CMEA 1990 GOST 0
Standard 756-77); Incorporates Amendments 2:6,1976; 3:12,1978; 4:9,1985; 5:3,1990
1783 9268 Mixed feeds-concentrates for fodder cattle. Specifications 1990 GOST 0
1784 28519 Medical bone saws. General technical requirements and test methods 1990 GOST 0
1785 28496 "System of evaluation of mutually delivering product quality and certification. Mark of conformity. Form, sizes and order 1990 GOST 0
of use"
1786 26266 Non-destructive testing. Ultrasonic transducers. General technical requirements 1990 GOST 0
1787 28649 Canned food. Boiled and vinegar pickled mushrooms. Specifications 1990 GOST 0
1788 28705 Industry centrifuges. General technical requirements 1990 GOST 0
1789 28576 Petroleum products and lubricants. General classification. Designation of classes 1990 GOST 0
1790 12633 Pneumatic rotary tools. General specifications 1990 GOST 0
1791 3716 Green unbroken tea in bulk. Specifications 1990 GOST 0
1792 23635 Fermentative preparation amyilosubtilin G3x. Specifications 1990 GOST 0
1793 12.2.124 Occupational safety standards system. Alimentary product equipment. General safety requirements 1990 GOST 0
1794 19623 Unidirectional restrictor valves of flying vehicles air systems. Types and general technical requirements 1990 GOST 0
1795 7303 ANTHRACITE METHOD FOR DETERMINATION OF VOLATILE MATTER VOLUME YIELD 1990 GOST 0
1796 22245 Viscous petroleum road bitumens. Specifications 1990 GOST 0
1797 28531 Cheese presses. Technical requirements 1990 GOST 0
1798 28498 Liquid-glass thermometers. General technical requirements. Methods of test 1990 GOST 0
1799 28664 "Twisters. Types, main parameters and technical requirements" 1990 GOST 0
1800 26242 Numerical control systems. Transducers of displacements. General specifications 1990 GOST 0
1801 28579.3.3 Insulating rigid mica materials for heating equipment. Specification 1990 GOST 0
1802 28709 Helical end mills with indexable carbid inserts and long cutting length. Specifications 1990 GOST 0
1803 6293 Raw. Requirements for state purchases and deliveries 1990 GOST 0
1804 12996 Pulling fork chains. Specifications 1990 GOST 0
1805 31.0151.01 Universal and specialized adjusting devices. General specifications 1990 GOST 0
1806 9163 "Canned meat ""Sausages"". Specifications" 1990 GOST 0
1807 12694 Knitted underwear for babies and nursery-school children. General specifications 1990 GOST 0
1808 24018.0 Nicel-based fire-resistant alloys. General requirements for method of analysis 1990 GOST 0
1809 7231 Canned tomatoes. General specifications 1990 GOST 0
1810 34.601 Information technology. Set of standards for automated systems. Atomated systems. Stages of development 1990 GOST 0
1811 23636 Fermentative preparation protosubtilin G3x. Specifications 1990 GOST 0
1812 8.310 State system for ensuring the uniformity of measurements. State system of standard reference data. Basic statements 1990 GOST 0
1813 28759.5 Flanges of vessels and apparatus. Technical requirements 1990 GOST 0
1814 28757 HEATERS FOR REGENERATION SYSTEMS OF STEAM TURBINES FOR HEAT POWER PLANTS GENERAL 1990 GOST 0
SPECIFICATIONS
1815 28436 End mills with mechanically clamped indexable inserts. Specifications 1990 GOST 0
1816 7933 Consumer container board. General specifications 1989 GOST 0
1817 15829 Piston fuel feeding pumps for diesels. General specifications 1989 GOST 0
1818 12.2.102 "Occupational safety standards system. Machines and equipment for timber logging and floating. Safety requirements, 1989 GOST 0
control methods for safety requirements and evaluation of labour safety"
1819 23270 Tubes-billets for mechanical treatment. Specifications 1989 GOST 0
1820 3739 Packed meat. Specifications 1989 GOST 0
1821 28078 The combinative groats. Specifications 1989 GOST 0
1822 10632 Wood particle boards. Specifications 1989 GOST 0
1823 10531 Canned fish. Fried fish in marinade. Specifications 1989 GOST 0
1824 28256 Mixed feed-food concentrates for milk mares. Specifications 1989 GOST 0
1825 28023 Adhesive tape for electrical insulation. Requirements for crepped paper tapes with thermosetting adhesive 1989 GOST 0
1826 17209 Measuring instruments of radionuclide volume activity in liquid. General technical requirements and test methods 1989 GOST 0
1827 8142 Railway plates for R18, R24, and R33 rails types. Specifications 1989 GOST 0
1828 12.4.176 Occupational safety standards system. Special clothes for protection from thermal effects. Requirements to protective 1989 GOST 0
properties and method for determining human thermal condition
1829 21520 SMALL WALL BLOCKS MADE OF CELLULAR CONCRETE SPECIFICATIONS 1989 GOST 0
1830 6478 Toffee. General specifications 1989 GOST 0
1831 22502 Condensing units with hermetic refrigeration compressors for commercial refrigeration equipment. General specifications 1989 GOST 0
1832 28367 Knitted fur for garments. General specifications 1989 GOST 0
1833 22340 Medical electrical water stills. General technical requirements and test methods 1989 GOST 0
1834 7505 STEEL STAMPED FORGINGS TOLERANCES, ALLOWANCES AND FORGE LAPS 1989 GOST 0
1835 12573 SUGAR Test method for ferro-impurities - Incorporating Amendment 1: 9/1980; Amendment 2: 3/1982; Amendment 3: 1989 GOST 0
10/1984; Amendment 4: 12/1988; Amendment 5: 6/1989
1836 23834 Pneumatic tyres for sport bicycles. Specifications 1989 GOST 0
1837 7192 Constant speed electrical actuators SSI. General specifications 1989 GOST 0
1838 19705 POWER-SUPPLY SYSTEMS OF AIRPLANES AND HELICOPTERS GENERAL REQUIREMENTS AND QUALITY 1989 GOST 0
NORMS FOR ELECTRIC POWER
1839 28071 Bone nippers. General requirements and test methods 1989 GOST 0
1840 28131 Dental chair. General technical requirements and methods of tests 1989 GOST 0
1841 28255 Mixed feed and food concentrates for raising and fattening younger meat horses. Specifications 1989 GOST 0
1842 28343 Flanged steel ball valves. Technical requirements 1989 GOST 0
1843 28414 "Fat for cookery, confectionery and bakery. General specifications" 1989 GOST 0
1844 31.0101.01 "Control parts handwheels, swivel levers, handles, knobs general specifications" 1989 GOST 0
1845 13846 WELL FLOWING AND DISCHARGE EQUIPMENT TYPICAL SCHEMES, KEY PARAMETERS AND TECHNICAL 1989 GOST 0
REQUIREMENTS FOR DESIGN - (CMEA Standard 4354-83)
1846 28279 ELECTROMAGNETIC COMPATIBILITY OF AUTOMOBILE ELECTRICAL EQUIPMENT AND ELECTRONICS 1989 GOST 0
NORMS AND MEASURING METHODS
1847 28022 Adhesive tape for electrical insulation. Requirements for polyester tapes with thermoplastic adhesive 1989 GOST 0
1848 9.083 UNIFIED SYSTEM OF CORROSION AND AGEING PROTECTION PAINT COATINGS ACCELERATED TEST 1989 GOST 0
METHODS FOR DURABILITY IN LIQUID CORROSIVE MEDIA - Incorporated Amendment 1: 06/1983 and
Amendment 2: 04/1988
1849 8828 Paper-base and two-layer waterproof packing paper. Specifications 1989 GOST 0
1850 9.005 UNIFIED SYSTEM OF PROTECTION AGAINST CORROSION AND AGEING. METALS, ALLOYS, METAL AND 1989 GOST 0
NONMETAL INORGANIC COATINGS PERMISSIBLE AND IMPERMISSIBLE CONTACTS WITH METALS AND
NONMETALS - Incorporating AMD 1: 01, 1989
1851 9542 Cardboard for footwear and detailes made of the same. General specifications 1989 GOST 0
1852 28021 Adhesive tape for electrical insulation. Requirements for polyester tapes with thermosetting adhesive 1989 GOST 0
1853 12.2.054.1 Occupational safety standards system. Acetylene installations. Acceptance and test methods 1989 GOST 0
1854 23683 Petroleum paraffin waxes. Specifications 1989 GOST 0
1855 28251 "Warp winders. Main parameters, dimensions and specifications" 1989 GOST 0
1856 28413 Hydraulic drive volumetric pumps and motors. Accelerated tests for reliability 1989 GOST 0
1857 24901 Biscuits. General specifications 1989 GOST 0
1858 28066 SSI. Positive displacement liquid maters. General specifications 1989 GOST 0
1859 11997 "Hydraulic vulcanizing presses. Types, parameters and dimensions" 1989 GOST 0
1860 6442 Marmalade. Specifications 1989 GOST 0
1861 24557 Bred buns. Specifications - Incorporating Amendment 1: 2/1992 1989 GOST 0
1862 9.307 United system of corrosion and ageing protertion. Hot dip zinc coating. General requirement and methods of checking 1989 GOST 0
1863 22391 Sunflower. Requirements for state purchases and deliveries 1989 GOST 0
1864 968 Sawn timber (bars and boards) for aircraft. Specifications - Incorporates Amendment 1: 10/1978 and Amendment 2: 1989 GOST 0
02/1988
1865 28020 Adhesive tape for electrical insulation. Requirements for plastified polyvinylchloride tapes with thermoplastic adhesive 1989 GOST 0
1866 701 Concentrated nitric acid. Specification 1989 GOST 0
1867 28041 Cross-overs section insulators frogs for tramway and trolleybus catenary suspensions. General specifications 1989 GOST 0
1868 25347 Basic Norms of Interchangeability UNIFIED SYSTEM OF TOLERANCES AND FITS Tolerance Ranges and 1989 GOST 0
Recommended Fits - Amendment 1: 10/1989
1869 26050 Industrial robots. General requirements 1989 GOST 0
1870 26246.9 Electric insulating metal-clad material of rated combustibility for printed plates base on non-woven epoxide impregnated 1989 GOST 0
glass fabric. Specifications
1871 28121 "Spiral classificators. Types, basic parameters, dimensions and specifications" 1989 GOST 0
1872 28243 Pyrometers. General technical requirements 1989 GOST 0
1873 28323 "Plate feeders. Types, basic parameters and technical requirements" 1989 GOST 0
1874 28409 Microgranular fooder vitamin A (retinol acetate). Specifications 1989 GOST 0
1875 25485 CELLULAR CONCRETES Specifications 1989 GOST 0
1876 27.002 RELIABILITY IN ENGINEERING MAIN CONCEPTS. TERMS AND DEFINITIONS 1989 GOST 0
1877 9094 Offset printing paper. Specifications 1989 GOST 0
1878 24691 AEROSOL CANS AND VALVES METHOD FOR DETERMINATION OF ANTICORROSIVE COATING 1989 GOST 0
CONTINUOUSNESS
1879 26246.6 Phenol impregnated cellulose paper foil-clad electrical insulating material of rated combustibility for printed plates. 1989 GOST 0
Specifications
1880 28402 Dried and finely ground bread-crumbs. General specifications 1989 GOST 0
1881 8554 Fire equipment. Motor-pomps. Acceptance and test methods 1989 GOST 0
1882 28100 NOISE PROTECTION IN CONSTRUCTION. NOISE SILENCERS. METHODS FOR DETERMINATION OF 1989 GOST 0
ACOUSTIC CHARACTERISTICS
1883 28314 "Centrifuges for dewatering products of coal. Types, basic parameters and technical requirements" 1989 GOST 0
1884 28113 Workover and production hoisting units for oil and gas wells. Types and specifications 1989 GOST 0
1885 28037 Nippers. Specifications 1989 GOST 0
1886 3619 Stationary steam boilers. Types and basic parameters 1989 GOST 0
1887 23785.7 CORD FABRIC METHOD OF RUBBER-TO-FABRIC BOND STRENGTH DETERMINATION - Includes Amendment 1989 GOST 0
1: 1992
1888 21292 Pneumatic rowing boats. General requirements 1989 GOST 0
1889 28018 Adhesive tape for electrical insulation. General specification 1989 GOST 0
1890 3914 Sulphite bleached pulp of coniferous wood. Specifications 1989 GOST 0
1891 8803 Hign electric resistance precision alloys minimum diameter round wire for resistors. Specifications 1989 GOST 0
1892 15176 Extruded tyres made of aluminium and aluminium alloys for electrical technology use. Specifications 1989 GOST 0
1893 26246.7 Phenol impregnated cellulose paper foil-clad electrical insulating material of rated combustibility for printed plates. 1989 GOST 0
Specifications
1894 28318 Spreaders. General technical requirements 1989 GOST 0
1895 28408 Hand pulley bincks and trolley. General technical conditions 1989 GOST 0
1896 6830 "Fresh gooseberry. Requirements for state purchases, deliveries and retail" 1989 GOST 0
1897 3343 Tomato foods concentrated. General specifications 1989 GOST 0
1898 28039 Knitted outerwear for men and boys. General specifications 1989 GOST 0
1899 2070 LIGHT OIL PRODUCTS Methods for determination of iodine numbers and content of unsaturated hydrocarbons - 1989 GOST 0
Incorporates Amendment 1:12/1987; CMEA Standard 2384-80
1900 28241 Hand vices. Specifications 1989 GOST 0
1901 4750 Pneumatic tyres for bicycles. Specifications 1989 GOST 0
1902 26246.4 Epoxide impregnated glass fabric foil-clad electrical insulating material of general use for printed plates. Specifications 1989 GOST 0
1903 8615 Universal dividing heads. General specifications 1989 GOST 0
1904 20283 Cover paper. Specifications 1989 GOST 0
1905 12063 School note-books. Specifications 1989 GOST 0
1906 5651 Domestic broadcast equipment. General specifications 1989 GOST 0
1907 22045 Overhead travelling single-beam cranes. Specifications 1989 GOST 0
1908 28394 Vermicular graphite iron for castings. Grades 1989 GOST 0
1909 28110 Equipment for cheese grain manufacture. Technical requirements 1989 GOST 0
1910 28027 Adhesive tape for electrical insulation. Requirements for paper tapes with thermosetting adhesive 1989 GOST 0
1911 28384 TELEPHONE EXCHANGES PARAMETERS OF INFORMATIONAL ACAUSTIC TONEFREQUENCY SIGNALS 1989 GOST 0
1912 17356 GAS AND LIQUID FUEL BURNERS Terms and Definitions - CMEA Standard 1706-88 1989 GOST 0
1913 6828 "Fresh strawberry. Requirements for state purchases, deliveries and retail" 1989 GOST 0
1914 17632 Dressed fur skins and fur-coat sheepskins. Method of shrinkage temperature determination - Incorporates Amendment 1: 1989 GOST 0
10,1979; Amendment 2: 03,1989
1915 20437 MOULDING MATERIAL ‫_ذ_ذ‬-4 Spe‫_ر‬ifications 1989 GOST 0
1916 790 Hard laundry soap and toilet soap. Acceptance rules and test methods of measurements 1989 GOST 0
1917 12586.0 Reinforced-concrete vibrohydropressed pressure pipes 1989 GOST 0
1918 22790 "Assembly units and pipeline parts for from 9, 81-98, 1 mpa (100-1000 kgf/sm2). General specifications" 1989 GOST 0
1919 23423 Fodder methionine. Specifications 1989 GOST 0
1920 6829 Fresh black currants. Requirements for state purchases deliveries and retail 1989 GOST 0
1921 8407 Reused rubber raw materials. Tyres and inner-tubes. Specifications 1989 GOST 0
1922 16534 Cardboard boxes for footwear. Specifications 1989 GOST 0
1923 5652 "Pneumatic tyres for motor-cycles, cycle-cars, motor-scooters and motor-bicycles. Specifications" 1989 GOST 0
1924 26246.5 Epoxide impregnated glass fabric foil-clad electrical insulating material of rated combustibility for printed plates. 1989 GOST 0
Specifications
1925 28196 Water-dispersion paints. Specifications 1989 GOST 0
1926 22296 Pulpwood for export. Specifications 1989 GOST 0
1927 28311 Laboratoris medical dozers. General technical requirements and test methods 1989 GOST 0
1928 22046 Furniture for educational institutions. Specifications 1989 GOST 0
1929 25832 Dietic bread products. Specifications 1989 GOST 0
1930 28399 "Pneumatic spinning machines. Main parameters, technical requirements and test methods" 1989 GOST 0
1931 28112 "Machines for extraction of bottles from boxes and packing of bottles into boxex. Types, main parameters and technical 1989 GOST 0
requirements"
1932 28034 Electroinsulating varnished cloths. General technical requirements 1989 GOST 0
1933 12.1.044 Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indices and 1989 GOST 0
methods of their determination
1934 24936 Permanent magnets for use in electrical products. General technical requirements 1989 GOST 0
1935 7721 Illuminants for colour measurements. Types. Technical requirements. Marking 1989 GOST 0
1936 28417 "Vaccine against sheep-infections enterotoxaemia, anaerobic lamb-dysentery and pig-necrotic enteritis cansed by 1989 GOST 0
clostridium perfringens types C, D. Technical requirements and control methods"
1937 8239 HOT-ROLLED STEEL FLANGED BEAMS RANGE OF PRODUCTS 1989 GOST 0
1938 5233 PAINT MATERIALS METHOD FOR DETERMINATION OF COATING HARDNESS WITH PENDULUM 1989 GOST 0
INSTRUMENT
1939 26246.1 "Phenol impregnated cellulose paper foil-clad electrical insulating material for printed plates, high electrical quality. 1989 GOST 0
Specifications"
1940 26161 Operating tables. General technical requirements and test methods 1989 GOST 0
1941 5394 Yuft footwear. General specifications 1989 GOST 0
1942 28369 Non-destructive testing. Ultraviolet sources. General technical requirements and test methods 1989 GOST 0
1943 5228 Rubber O-rings for the couplings of asbestos-concrete pipes. Specifications 1989 GOST 0
1944 28086 Vaccine for myxomatose of rabbits. Technical requirements and methods of control 1989 GOST 0
1945 7396.1 Plugs (electrical) plugs and socket-outlets for domestic and similar general use. Standards 1989 GOST 0
1946 28172 Sulphate bleached pulp of mixture of broadleaved wood species. Specifications 1989 GOST 0
1947 26711 Tractors planters. General technical requirements 1989 GOST 0
1948 34.201 INFORMATION TECHNOLOGY Set of Standards for Automated Systems TYPES, COMPLETE SETS AND 1989 GOST 0
DESIGNATIONS OF DOCUMENTS FOR AUTOMATED SYSTEMS DEVELOPMENT - Amd 1: 12/1990
1949 12.2.109 Occupational safety standards system. Sheet stamping dies. General safety requirements 1989 GOST 0
1950 23496 Nedical optical endoscopes. General technical requirements and test methods 1989 GOST 0
1951 5883 Solid-rubber tyres. Specifications 1989 GOST 0
1952 17692 Broadcast car radio receivers. General specifications 1989 GOST 0
1953 28375 Compact disk players. General requirements and methods of measurement 1989 GOST 0
1954 22251 Measuring instruments of radioactive artificial aerosol volume activity. General technical requirements and test methods 1989 GOST 0
1955 13603 Twisted wire nets with hexagonal cells. Specifications 1989 GOST 0
1956 28174 Tractors and machinery for agriculture. Hydraulic steering drive. General technical requirements 1989 GOST 0
1957 28272 Flexible disk drives. General technical requirements 1989 GOST 0
1958 20859.1 Power semiconductor devices. General technical requirements 1989 GOST 0
1959 26246.12 General-purpose polyimide foil-clad film for flexible printed plates. Specifications 1989 GOST 0
1960 28168 SOILS SAMPLING 1989 GOST 0
1961 28130 FIRE ENGINEERING FIRE EXTINGUISHERS, EXTINGUISHING INSTALLATIONS AND FIRE ALARM SYSTEMS 1989 GOST 0
CONVENTIONAL GRAPHIC SYMBOLS
1962 6402 SPRING WASHERS Specifications - Incorporates Amendment 2: 03/1973; Amendment 3: 12/1982 1989 GOST 0
1963 28024 Adhesive tape for electrical insulation. Requirements for paper tapes with thermosetting adhesive 1989 GOST 0
1964 24278 Stationary steam turbines for electric generators at thermal electric stations. General specifications 1989 GOST 0
1965 28281 Disk cutter for sprockets of transmission roller and bush chains. Specifications 1989 GOST 0
1966 28179 Fodder yeast. Specification 1989 GOST 0
1967 28376 Compact disk. Parameters and dimensions 1989 GOST 0
1968 24032 Mine instruments for gas analysis. General requirements. Testing methods - Incorporating Amendment 1: 11/1985, 1989 GOST 0
Amendment 2: 9/1989
1969 27451 Ionizing radiation measuring means. General specifications - Incorporating Amendment 1: 03/1989 1989 GOST 0
1970 16962.1 Electrical articles. Test methods as to environments climatic factors resistance 1989 GOST 0
1971 28087 Vaccine for mink botulism. Technical requirements and methods of control 1989 GOST 0
1972 10089 COAL COKE REACTIVITY DETERMINATION METHOD - CMEA Standard 6161-88 1989 GOST 0
1973 25084 Universal dies with changeable built-up tool sets. General specifications 1989 GOST 0
1974 16964 SEAMS FOR FABRIC COVERS Design and dimensions - Incorporates Amendment 1: 09/1974; Amendment 2: 10/1985 1989 GOST 0
1975 18198 Television receivers. General specifications 1989 GOST 0
1976 11321 Fodder lupine. Requirements for state purchases and deliveries 1989 GOST 0
1977 6557 Rubber Ring Gaskets for Fire-Extinguishing Connection Fittings Specifications 1989 GOST 0
1978 12308 Thermostable fuels T-6 and T-8B for jet engines. Specifications 1989 GOST 0
1979 28157 PLASTICS Fire Resistance Test methods 1989 GOST 0
1980 16515 Positive-displacement hydraulic drives and lubricating systems. Filters and filter elements. General technical requirements 1989 GOST 0
1981 12576 SUGAR Test methods for the appearance, smell, taste and the solution cleanness 1989 GOST 0
1982 28098 Fodder hammer breakers. Specifications 1989 GOST 0
1983 21240 Medical scalpels and knives. General technical requirements and test methods 1989 GOST 0
1984 19463 TRUNK VIDEO CHANNELS OF RADIO-RELAY AND SATELLITE TRANSMISSION SYSTEMS KEY 1989 GOST 0
PARAMETERS AND METHODS OF MEASUREMENTS - Incoporated Amendment 1
1985 28025 Adhesive tape for electrical insulation. Requirements for polycarbonate tapes with thermoplastic adhesive 1989 GOST 0
1986 28188 Non alcoholic drinks. General specification 1989 GOST 0
1987 28288 Luminaires with built-in transformers for filament lamps. General specifications 1989 GOST 0
1988 25907 Towing attachments for commercial vehicles. General technical requirements and test procedure 1989 GOST 0
1989 14031 Wafers. Specifications - Incorporating Amendment 1: 12/1981, Amendment 2: 11/1987, Amendment 3: 4/1988 1989 GOST 0
1990 28286 Agricultural machinery LOADERS Test methods 1989 GOST 0
1991 23923 Measuring instruments of radionuclide specific activity. General technical requirements and test methods 1989 GOST 0
1992 11677 Power transformers. General specifications - Incorporates Amendment 1: 05/1987, Amendment 2: 09/1987, and 1989 GOST 0
Amendment 3: 09/1989; Includes Amendment 4: 1991
1993 26246.3 Epoxide impregnated cellulose paper foil-clad electrical insulating material of rated combustibility for printed plates. 1989 GOST 0
Specifications
1994 28386 Apparatus of hyperbaric oxygenation. General technical requirements 1989 GOST 0
1995 13861 Regulators for gasflame working. General specifications 1989 GOST 0
1996 28295 Collectors of electrical rotating machines. General specifications 1989 GOST 0
1997 19687 Devices for heart bioelectric potentials measurement. General technical requirements and test methods 1989 GOST 0
1998 14249 VESSELS AND APPARATUSES STANDARDS AND METHODS OF STRENGTH CALCULATION - Includes 1989 GOST 0
Amendment 1: 1997; Incorporates Corrigendum: 2005
1999 7730 Cellulose film. Specifications 1989 GOST 0
2000 2327 LOW-VOLTAGE BREAKERS, BREAKER-DISCONNECTORS, SWITCHES AND SWITCH-DISCONNECTORS 1989 GOST 0
GENERAL SPECIFICATIONS
2001 16428 DUCK FABRICS MADE OF REAL SILK AND CHEMICAL YARN SPECIFICATIONS 1989 GOST 0
2002 12844 TECHNICAL EPICHLORHYDRINE - SPECIFICATIONS - Incorporating Amendment 1: 03/1986, Amendment 2: 1989 GOST 0
12/1988; Amendment 3: 1989
2003 2.709 "Unified system of design documentetion. Conventions of wires and terminal connections of electrical elements, equipment 1989 GOST 0
and subcircuits in circuit diagrams"
2004 28147 INFORMATION PROCESSING SYSTEMS. CRYPTOGRAPHIC PROTECTION CRYPTOGRAPHIC 1989 GOST 0
TRANSFORMATION ALGORITHM
2005 28107 "Machines for mixing minced meat. Main parameters, technical requirements and test methods" 1989 GOST 0
2006 21241 Medical pincers. General technical requirements and test methods 1989 GOST 0
2007 17353 Instruments for measurements of form and position deviations of surfaces of revolution. Types. General technical 1989 GOST 0
requirements
2008 28026 Adhesive tapes for electrical insulation. Requirements for polyimide tapes with themosetting adhesive 1989 GOST 0
2009 28189 Half-finished bone product. Specifications 1989 GOST 0
2010 12.2.017.2 Occupational safety standards system. Hammers. Safety requirements 1989 GOST 0
2011 596 Technical sodium sulphide. Specifications 1989 GOST 0
2012 16293 Unitized drilling rigs for development and deep exploratory drilling. Basic parameters 1989 GOST 0
2013 12579 GRANULATED AND REFINED SUGAR Test method for granulometric composition - Incorporating Amendment 1: 1989 GOST 0
8/1984; Amendment 2: 10/1987; Amendment 3: 6/1989
2014 9571 Sulphate bleached pulp made of coniferous wood. Specifications 1989 GOST 0
2015 9062 Chaplets for iran and steel. General specifications 1989 GOST 0
2016 17622 TECHNICAL ORGANIC GLASS SPECIFICATIONS - Incorporating Amendment 2: 09/1976; Amendment 3: 08/1983; 1989 GOST 0
Amendment 4: 11/1988
2017 14225 Wooden cases. General specifications - Incorporating Amendment 1: 3/1989, Amendment 2: 6/1991 1989 GOST 0
2018 22638 Boxes made of boards and plywood for electronic products. General specifications 1989 GOST 0
2019 26246.2 Phenol impregnated cellulose paper foil-clad electrical insulating material for printed plates economic quality. 1989 GOST 0
Specifications
2020 6534 Chocolate. General specifications 1989 GOST 0
2021 813 Cold smoked herrings. Specifications 1988 GOST 0
2022 11041 Rossiyski cheese. Specifications 1988 GOST 0
2023 5468 Needle wire. Specifications 1988 GOST 0
2024 12.1.029 Occupational safety standards system MEANS AND METHODS OF NOISE PROTECTION 1988 GOST 0
2025 1084 Salted with spices and pickled herrings and japanese sardine. Specifications 1988 GOST 0
2026 4194 Electroinsulating board for transformers and apparatus charged with oil. Specifications 1988 GOST 0
2027 2292 "Round timber. Marking, grading, transportation, methods of measurement and acceptance" 1988 GOST 0
2028 19548 Twist drills for machining light alloys. Specifications 1988 GOST 0
2029 1908 Capacitor paper. General specifications 1988 GOST 0
2030 17494 Rotating electrical machines. Classification of protection degrees provided by enclosures of rotating electric machines - 1988 GOST 0
IEC 34-5-81; (CMEA Standard 247-85);
2031 10385 Mixed fodder for pond carp fishes Specifications 1988 GOST 0
2032 1608 Filament lamps for ships specifications 1988 GOST 0
2033 23543 Geodetic instruments. General specifications 1988 GOST 0
2034 12496 Electrotechnical glass epoxies phenol cylinders and tubes. Specifications 1988 GOST 0
2035 16990 Rye. Requirements for state purchases and deliveries 1988 GOST 0
2036 27651 "Women‫_آ‬s costumes for protection from mechanical damage, water and alkalis. Specifications" 1988 GOST 0
2037 27747 Rabbit-meat. Specifications 1988 GOST 0
2038 1135 Home and light foot-wear. Specifications 1988 GOST 0
2039 15.004 System of products development and launching it into manufacture. Personal safety means 1988 GOST 0
2040 10579 Injectors for diesels. General technical requirements 1988 GOST 0
2041 22536.3 Carbon steet and unalloyed cast iron. Methods for determination of phosphorus 1988 GOST 0
2042 27955 Ultrasonic magnetostrictive transducers. Methods of measuring characteristics 1988 GOST 0
2043 9462 Round timber of broad leaved species. Specifications 1988 GOST 0
2044 24607 Semiconductor frequency converters. General technical requirements 1988 GOST 0
2045 20791 Electrically centrifugal glandless pumps. General specifications 1988 GOST 0
2046 3306 Nets with square meshes from steel corrugated wire. Specifications 1988 GOST 0
2047 7067 Common vetch. Requirements for state purchases and deliveries 1988 GOST 0
2048 12765 Dielectric sulphate unbleached pulp of coniferous species. Specifications 1988 GOST 0
2049 27643 Men‫_آ‬s overalls for protection from water. Specification 1988 GOST 0
2050 2746.1 Plastic Edison screw lampholders. Specifications 1988 GOST 0
2051 27905.1 ELECTRIC INSULATION SYSTEMS OF ELECTRICAL EQUIPMENT EVALUATION AND CLASSIFICATION 1988 GOST 0
2052 27724 Drills with indehable inserts. Specifications 1988 GOST 0
2053 812 Hot-smoked herrings. Specifications 1988 GOST 0
2054 1282 Capacitors for power factor correction. Specifications 1988 GOST 0
2055 27832 Cotton and mixed blankets. General specifications 1988 GOST 0
2056 27905.4 ELECTRICAL INSULATION SYSTEMS Methods of Electrical Stability Assessment 1988 GOST 0
2057 25712 FINISHED TREADS FOR TRAM-CARS SPECIFICATIONS 1988 GOST 0
2058 27641 "Machines for textile web length measuring. Types, basic parameters and technical requirements" 1988 GOST 0
2059 27913 Lifting appliances. Controls. Layout and characteristics. General principles - (ISO 7752/1-83) 1988 GOST 0
2060 12.1.020 Occupational Safety Standards System NOISE CONTROL METHOD FOR SEA AND RIVER VESSELS - Incorporating 1988 GOST 0
Amendment 1: 7/1985; Amendment 2: 10/1987
2061 14022 Hydrogen fluoride anhydrous. Specification 1988 GOST 0
2062 11875 General purpose rotary drum heat exchangers. Coolers. Basic parameters and dimensions 1988 GOST 0
2063 12.2.007.12 Occupation safety standards system. Chemical sources of electric energy. Safety requirements 1988 GOST 0
2064 12.1.007 Occupational safety standards system. Noxious substances. Classification and general safety requirements - Incorporates 1988 GOST 0
Amendment 1:09/1981; Includes Amendment 2: 1989
2065 8692 Fibre abrasive disks. Specifications 1988 GOST 0
2066 27914 Mobile cranes. Drum and sheave sizes 1988 GOST 0
2067 27830 Unexchangeable rigid magnetic disk storage with movable heads. General technical requirements 1988 GOST 0
2068 21574 Electromagnetic clutches with magnetic-flux-conducting discs. Technical requirements and methods of testing 1988 GOST 0
2069 177 Hydrogen peroxide. Specifications 1988 GOST 0
2070 2287 Flat thread chasers. Specifications 1988 GOST 0
2071 15841 Wooden cases for products of tractor and agricultural machinery. Technical requirements - Incorporating Amendment 1: 1988 GOST 0
4/1990, Amendment 2: 1/1991
2072 27905.3 ELECTRICAL INSULATION SYSTEMS Multifactor functional test methods 1988 GOST 0
2073 27699 Uninterrupted power supply systems of a.c. receivers. General specifications 1988 GOST 0
2074 6806 Paint and lacquer materials. Method for determination of film elasticity in bending - Incorporating Amendment 1: 03/1982; 1988 GOST 0
Amendment 2: 06/1986
2075 24824 Ironing presses. Main dimensions, technical requirements and methods testing 1988 GOST 0
2076 27818 Computers and data processing systems. Admissible noise emission levels at workstations and methods for determination 1988 GOST 0
2077 27900 Luminaires for emergency lighting. Specifications 1988 GOST 0
2078 22536.10 Carbon steel and unalloyed cast iron. Methods for determination of alluminium 1988 GOST 0
2079 14191 Low-power rotating electrical machines. Motors for tape-recorders and electrorecord-playing equipment for domestic use. 1988 GOST 0
General specifications
2080 6482 Reinforced concrete non-pressure pipes. Specifications 1988 GOST 0
2081 7061 Preserves. General specifications 1988 GOST 0
2082 19503 Hydrazine-hydrate for industrial use. Specifications 1988 GOST 0
2083 3484.3 POWER TRANSFORMERS Measuring Methods for Insulation Dielectric Parameters 1988 GOST 0
2084 815 Salted herrings. Specifications 1988 GOST 0
2085 18724 Felted high boots. Specifications 1988 GOST 0
2086 8420 PAINTWORK MATERIALS METHODS OF DETERMINATION OF CONDITIONAL VISCOSITY - (CMEA Standard 1988 GOST 0
1443-78); Incorporates Amendment 1: 03/1988 and Amendment 2: 10/1987
2087 14177 Spindles with built-in drive. General specifications 1988 GOST 0
2088 27684 Bain-maries electric for public catering establishments. General technical requirements and test methods 1988 GOST 0
2089 27632 Charged particle accelerators for industrial application. General technical requirements 1988 GOST 0
2090 6755 Chemical lime absorbent KhP-I. Specifications 1988 GOST 0
2091 2939 GASES. VOLUME DETERMINATION CONDITIONS 1988 GOST 0
2092 3484.1 POWER TRANSFORMERS ELECTROMAGNETIC TEST METHODS 1988 GOST 0
2093 12.1.016 Labour safety standards system. Working zone air. Requirements for measurement techniques of hazardous matter 1988 GOST 0
concentrations - Incorporating Amendment 1: 6/1983
2094 18222 Sardines salted with spices. Specifications 1988 GOST 0
2095 22465 CENTRIFUGAL BOOSTER PUMPS BASIC PARAMETERS 1988 GOST 0
2096 27978 Green fodder. Specification 1988 GOST 0
2097 17111 Ground-nuts. Requirements for state purchases and deliveries 1988 GOST 0
2098 27844 Rolls and buns. Specifications 1988 GOST 0
2099 24721 Cylindrical manganese-zinc cells. General specifications 1988 GOST 0
2100 27758 The vacuum gauges. Type. General technical requirements 1988 GOST 0
2101 12253 Clips for ball-socket couplings of line hardware and insulators. Specifications 1988 GOST 0
2102 16739 Purified tuberculin (PPD) for mammals. Specifications 1988 GOST 0
2103 12344 Alloyed and high-alloyed steels. Methods of carbon determination 1988 GOST 0
2104 20799 Industrial oils. Specifications 1988 GOST 0
2105 3484.4 POWER TRANSFORMERS Tank test for mechanical strength 1988 GOST 0
2106 27962 Flour-grinding equipment. General specifications 1988 GOST 0
2107 17109 Soy-beans. Requirements for state purchases and deliveries 1988 GOST 0
2108 27842 Wheat bread. Specifications 1988 GOST 0
2109 27752 "Electronic-mechanical quartz table, wall and arm-clocks. General specifications" 1988 GOST 0
2110 9219 Electrical apparatus. General requirements 1988 GOST 0
2111 11126 COKE RAW MATERIALS FOR THE PRODUCTION OF TECHNICAL CARBON SPECIFICATIONS - Incorporating 1988 GOST 0
Amendment 1: 6/1990, Amendment 2: 7/1991, Amendment 3: 4/1992 and Amendment 4: 3/2006
2112 27905.2 ELECTRICAL INSULATION SYSTEMS The performance and ageing mechanism evaluation and diagnostic techniques 1988 GOST 0
2113 23405 PNEUMATIC AND HYDRAULIC CHECK VALVES TYPES, KEY PARAMETERS AND TECHNICAL 1988 GOST 0
REQUIREMENTS - Incorporating Amendment 1: 10/1984 and Amendment 2: 6/1989
2114 22283 Aircraft noise. Admissible noise levels in the region of dwelling-houses and methods of its measurement 1988 GOST 0
2115 14146 Fuel filters for diesel engines. General technical requiremets 1988 GOST 0
2116 12250 Canned fish with vegetables in oil. Specifications 1988 GOST 0
2117 9725 CENTRIFUGAL BLOW FANS FOR BOILERS GENERAL SPECIFICATIONS - Incorporating Amendment 1: 2/1987 1988 GOST 0
2118 22536.4 Carbon steel and unalloyed cast iron. Methods for determination of determination of silicon 1988 GOST 0
2119 10418 Small-seeded lentil. Requirements for state rurchases and deliveries 1988 GOST 0
2120 27654 Women‫_آ‬s overalls for acid protection. Specifications 1988 GOST 0
2121 27587 Technical means of analog computing technique. General requerements 1988 GOST 0
2122 20144 Canned cucumbers. Specifications - Incorporating Amendment 1: 3/1980, Amdnement 2: 11/1987 1988 GOST 0
2123 16325 General-purpose digital computers. General technical requirements 1988 GOST 0
2124 267 RUBBER DENSITY DETERMINATION METHODS - (CMEA Standard 2593-80); Incorporates Amendment 1: 10,1979; 1988 GOST 0
Amendment 2: 8,1982; Amendment 3: 6,1988
2125 12.1.033 Occupational Safety Standards System FIRE SAFETY Terms and Definitions - Incorporating Amendment 1: August 1983 1988 GOST 0
2126 22536.7 Carbon steel and unalloyed cast iron. Methods for determination of chromium 1988 GOST 0
2127 14163 Electric cast surface units. Specifications 1988 GOST 0
2128 2879 Hot-rolled hexagonal steel. Dimensions 1988 GOST 0
2129 27691 VESSELS AND APPARATUS REQUIREMENTS FOR PRESENTATION OF COMPUTER-AIDED STRENGTH 1988 GOST 0
CALCULATIONS
2130 11270 Bakery products. Solomka. General specifications 1988 GOST 0
2131 5742 INSULATING PRODUCTS MADE OF CELLULAR CONCRETE 1988 GOST 0
2132 27781 Computers and data processing systems. Recorded data media. Rules of labelling 1988 GOST 0
2133 27851 Hydraulic drive volumetric pumps. Accelerated comparative life tests 1988 GOST 0
2134 21140 Package. System of dimensions 1988 GOST 0
2135 3340 Hard coal foundry coke. Specifications 1988 GOST 0
2136 27584 Electric overhead travelling cranes and gantry cranes. General specifications 1988 GOST 0
2137 8726 Electrotechnical paper-bakelite tubes. Specifications 1988 GOST 0
2138 10417 Morse beans. Requirements for state purchases and deliveries 1988 GOST 0
2139 12946 HANGER COLLAR NUTS FOR MACHINE RETAINING DEVICES Design - Incorporating Amendment 1: 06/1980 and 1988 GOST 0
Amendment 2: 03/1988
2140 22536.6 Carbon steel and unalloyed cast iron. Methods for determination of arsenic 1988 GOST 0
2141 18691 Artificially dried grass feeds. Specifications 1988 GOST 0
2142 2475 Wires and rolls. Specifications 1988 GOST 0
2143 27771 The procedure characteristics for the interface beetween data termination equipment and data circuit terminating equipment 1988 GOST 0
general requirements and regulations
2144 28000 Pure woollen, woolen and half-woollen fabrics for garments. General requirements - Incorporating Amendment 1: 6/1990, 1988 GOST 0
Amendment 2: 8/1992
2145 27850 Food rye for export. Specifications 1988 GOST 0
2146 10907 Macaroni products with meat. Specifications 1988 GOST 0
2147 18396 Lampholders for fluorescent lamps and starters. Specifications 1988 GOST 0
2148 18223 Mackerel and jack mackerel salted with spices. Specifications 1988 GOST 0
2149 22983 Millet. Requirements for state purchases and deliveries 1988 GOST 0
2150 3484.5 POWER TRANSFORMERS Tank tests for leak-proofness 1988 GOST 0
2151 12.2.117 Occupational safety standards system. Hydraulic presses. Safety requirements 1988 GOST 0
2152 13918 Soviet champagne. Specifications 1988 GOST 0
2153 10419 Everlasting pea. Requirements for state purchases and deliveries 1988 GOST 0
2154 12.1.030 Occupational Safety Standards System ELECTRICAL SAFETY. PROTECTIVE GROUNDING. NEUTRAL 1988 GOST 0
GROUNDING - Incorporates Amendment 1: 03/1987
2155 9650 AXLES SPECIFICATIONS - Incorporating Amendment 1: 6/1983; Incorporating Amendment 2: 5/1988 1988 GOST 0
2156 10691.5 Black-and-White Aerial Films Method of Speed Numbers Determination - Incorporates Corrigendum: 1/1990 1988 GOST 0
2157 27667 Compact disc digital audio system. Parameters 1988 GOST 0
2158 27590 Water heaters for heat supply systems. General specifications 1988 GOST 0
2159 9.080 UNIFIED SYSTEM OF PROTECTION AGAINST CORROSION AND AGEING OF MATERIALS AND PRODUCTS 1988 GOST 0
VISCOUS LUBRICANATS SHORTCUT METHOD OF DETERMINATION OF CORROSION ACTION ON METALS
- (CMEA Standard 3964-83); IN PLACE OF GOST 5757-67; Incorporates Amendment 1: 10/1983 a
2160 16327 Transport packings for radioactive materials. General specifications 1988 GOST 0
2161 16115 Diamond segment cut-off wheels forms 1A1RSS/C1 and 1A1RSS/C2. Specifications 1988 GOST 0
2162 27857 Pipes for irrigators. Principal parameters dimensions and technical specifications 1988 GOST 0
2163 5525 Pig iron connecting parts manufactured by pouring into sand moulds for pipelines. Specifications 1988 GOST 0
2164 19007 PAINTWORK MATERIALS METHOD OF DETERMINATION OF DRYING TIME AND DEGREE - Incorporates 1988 GOST 0
Amendments 1:06/1980 and Amendment 2:07/1987; Supersedes GOST 10086-39;CMEA Standard 1442-78
2165 14907 Dictating machines. General specifications 1988 GOST 0
2166 27786 Fodder griseus. Specifications 1988 GOST 0
2167 6613 Square meshed woven wire cloths. Specifications - Incorporating Amendment 1: 03/1988 1988 GOST 0
2168 82 UNIVERSAL WIDE-STRIP HOT-ROLLED STEEL ASSORTMENT - (CMEA Standard 2884-81); Incorporating 1988 GOST 0
Amendment 1:11/1978, Amendment 2: 09/1982, Amendment 3: 10/1986, and Amendment 4: 10/1987
2169 12.2.118 System of safety standards. Shears. Safety requirements - Incorporating Amendment 1: 3/1991, Corrigendum: 1991 1988 GOST 0
2170 2.119 Unified System for Design Documentation PRELIMINARY DESIGNS - Incorporates Amendment 1: 08/1981, 1988 GOST 0
Amendment 2: 11/1982, Amendmnet 3: 09/1985, and Amendment 4: 01/1987
2171 27727 INDUCTION CRUCIBLE FURNACES OF NETWORK FREQUENCY FOR FOUNDRY-IRON MELTING POWER 1988 GOST 0
CONSUMPTION NORMS
2172 27672 "Plain bearings. Wrapped bushes. Dimensions, tolerances and methods of checking" 1988 GOST 0
2173 13268 Tubular electric heaters 1988 GOST 0
2174 17649 Conned beans or peas with lard tomato sause. Specifications - Incorporating Amendment 1: 2/1978, Amendment 2: 6/1981, 1988 GOST 0
Amendment 3: 7/1982, Amendment 4: 9/1987
2175 26.205 Telemechanics complexes and devices. General technical specifications 1988 GOST 0
2176 5311 Carelsky bread. Specifications - Incorporating Amendment 1: 3/1982, Amendment 2: 1/1984, Amendment 3: 6/1988, 1988 GOST 0
Amendment 4: 10/1993, Corrigendum: 1995
2177 7474 Knitted outerwear for women and girls. General specifications 1988 GOST 0
2178 19433 Dangerous goods. Classification and marking 1988 GOST 0
2179 9396 Returnable wooden boxes. General spcifications 1988 GOST 0
2180 27807 Vertical hudraulic turbines. Technical requirements and rules of acceptance 1988 GOST 0
2181 21546 Hammer dies for die forging. General technical requirements 1988 GOST 0
2182 22727 ROLLED SHEETS METHODS OF ULTRASONIC INSPECTION 1988 GOST 0
2183 18173 Grained salmon caviar packed in cans. Specifications - Incorporating Amendment 1: 4/1980, Amendment 2: 7/1988, 1988 GOST 0
Amendment 3: 4/1996
2184 2.124 Uniform system of design documentation PROCEDURE FOR THE USE OF PURCHASED PRODUCTS - Includes 1988 GOST 0
Amendment 1: 1995
2185 22339 SHUNTING AND INDUSTRIAL DIESEL LOCOMOTIVES TYPES AND KEY PARAMETERS - Amendment 1988 GOST 0
1:12/1990
2186 22536.9 Carbon steel and unalloyed cast iron. Methods for determination of nickel 1988 GOST 0
2187 9846 Crispbread. Specifications 1988 GOST 0
2188 17199 Fitter‫_آ‬s screwdrivers. Specifications 1988 GOST 0
2189 27874 Extracorporeal blood purification dialyzers. General requirements and testing methods 1988 GOST 0
2190 18056 Canned natural shrims. Specifications 1988 GOST 0
2191 12161 Canned fish with vegetables in tomato sauce. Specifications 1988 GOST 0
2192 3484.2 POWER TRANSFORMERS Heating Tests - Amendment 1:1992 1988 GOST 0
2193 6477 Caramel. General specifications 1988 GOST 0
2194 21153.5 ROCKS Test method for ultimate compression shear strength 1988 GOST 0
2195 13273 Drinking medicinal and medicinal-table mineral waters. Specifications 1988 GOST 0
2196 16809 Starting equipment for discharge lamps. General technical requirements 1988 GOST 0
2197 27681 Gamma-resonance spectrometers. General technical requirements and test methods 1988 GOST 0
2198 20000 Tractor and combine diesels. General specifications 1988 GOST 0
2199 2875 Plane-angle standards of the prism type. General specifications 1988 GOST 0
2200 23262 Home acoustic systems. General specifications 1988 GOST 0
2201 27593 SOILS TERMS AND DEFINITIONS - :1985 1988 GOST 0
2202 2.125 Unified system of design documentation. Rules for making sketch documents 1988 GOST 0
2203 27875 Air turbine dental handpieces and flexible hose connectors. Mounting dimensions 1988 GOST 0
2204 17557 Terminal installation shoes. General technical requirements 1988 GOST 0
2205 27682 High-pressure mercury vapour lamps 1988 GOST 0
2206 5378 VERNIER PROTRACTORS Specifications 1988 GOST 0
2207 26986 Delicious bread. Specifications - Incorporating Amendment 1: 12/1991 1988 GOST 0
2208 6882 Dried grapes. Specifications 1988 GOST 0
2209 12.2.029 Occupational safety standarts system. Machine tool devices. Safety requirements 1988 GOST 0
2210 11518 Fabrics for shirts of chemical and blended yarns. General specifications 1988 GOST 0
2211 22536.1 Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite 1988 GOST 0
2212 6628 DOUBLE HOOKS. BLANKS TYPES. DESIGN AND DIMENSIONS - Incorporates Amendment 1: 12/1992 1988 GOST 0
2213 22842 Granulated mixed feed-concentrates for fattened horses. Specifications 1988 GOST 0
2214 27472 SPECIALIZED ROAD VEHICLES LABOR PROTECTION AND ERGONOMICS REQUIREMENTS 1987 GOST 0
2215 23781 NATURAL COMBUSTIBLE GASES CHROMATOGRAPHIC METHOD FOR DETERMINATION OF COMPONENT 1987 GOST 0
COMPOSITION - Incorporating Amendments 1 and 2: 10/2002
2216 15518 "Plate heat exchanges. Types, parameters and basic dimensions" 1987 GOST 0
2217 27296 SOUND INSULATION OF ENCLOSING STRUCTURES NOISE PROTECTION IN CONSTRUCTION METHODS OF 1987 GOST 0
MEASUREMENT
2218 27240 STEAM-AND-GAS PLANTS TYPES AND KEY PARAMETERS 1987 GOST 0
2219 27360 General purpose oil sealed power transformers to 1600 kV x A for voltage to 22 kV. Main parameters and general tecnical 1987 GOST 0
requirements
2220 23866 "Single-seated, bouble seated and cage control valves. Basic parameters" 1987 GOST 0
2221 25052 Apparatus for ultrasonic therapeutics. General specifications 1987 GOST 0
2222 19.601 Unified system of program documentation GENERAL RULES FOR DUPLICATION, REGISTRATION AND STORAGE 1987 GOST 0
2223 27292 "Footwear edgetrimming machines. Types,technical characteristics and requirements" 1987 GOST 0
2224 27443 "Zeather fleshing machines. Main parameters, dimensions and requirements" 1987 GOST 0
2225 16078 PIPELINES CONNECTION ON INTERNAL CONE Technical requirements - Incorporating Amendment 1: 12/1980; 1987 GOST 0
Amendment 2: 02/1986
2226 7565 CAST-IRON, STEEL AND ALLOYS SAMPLING METHOD FOR DETERMINATION OF CHEMICAL 1987 GOST 0
COMPOSITION - (CMEA Standard 466-77); Incorporates Amendment 1: 06/1986
2227 7668 DOUBLE LAY ROPE OF TYPE L,K-,Q,O OF DESIGN 6x36 (1+7+7/7+14)+1 o. c. - Incorporates Amendment 1: 1987 GOST 0
11/1986; Includes Amendment 2: 1993; Corrections 6/2006
2228 14918 GALVANIZED SHEET STEEL FROM CONTINUOUS LINES SPECIFICATIONS - Incorprates Amendment 1:09/1981 1987 GOST 0
and Amendment 2: 06/1986
2229 27358 Press moulds for manufacturing of plastic articles. General technical conditions 1987 GOST 0
2230 27562 IRON ORES, CONCENTRATES, SINTERS AND PELLETS GRAIN SIZE DISTRIBUTION DETERMINATION BY 1987 GOST 0
SIEVING ANALYSIS
2231 19.005 Unified System of Software Documentation R-CHARTS FOR ALGORITHMS AND PROGRAMS Conventional graphic 1987 GOST 0
designations and rules of plotting
2232 24991 FERROCHROME, FERROCHROME SILICON, FERROSILICON, FERROMANGANESE SILICON, 1987 GOST 0
FERROMANGANESE METHODS OF SAMPLING AND PREPARATION OF TEST SPECIMEN FOR CHEMICAL
AND PHYSICO-CHEMICAL ANALYSES - Incorporating Amendment 1: 12/1985
2233 27291 "Footwear roughing machines. Types,technical characteristics and requirements" 1987 GOST 0
2234 12.4.173 Occupational safety standards system. Personal protective means against alkalies. Norms of alkali permeability 1987 GOST 0
2235 27442 "Footwear equipment forming. Types, technical characteristics and requirements" 1987 GOST 0
2236 27552 Mobile cranes. Terms and definitions 1987 GOST 0
2237 24796 Car tape recorders. General specification 1987 GOST 0
2238 19.106 Unified System of Program Documentation REQUIREMENTS FOR PRINTED PROGRAM DOCUMENTS - Amendment 1987 GOST 0
1, September 1981
2239 27322 ENERGY BALANCE OF INDUSTRIAL ENTERPRISE GENERAL PROVISIONS 1987 GOST 0
2240 27331 FIRE ENGINEERING Classification of fires 1987 GOST 0
2241 27547 Microgranular fodded vitamin E ( alpha-tocopherol acetate ). Specifications 1987 GOST 0
2242 27441 Gas heat processing appliances for public catering 1987 GOST 0
2243 27201 "Personal computers. Types, basic parameters, general requirements" 1987 GOST 0
2244 22613 "Man-Machine" System ROTARY SWITCHES AND SELECTORS General ergonomic requirements 1987 GOST 0
2245 27288 Sewing industrial machines. General technical requirements 1987 GOST 0
2246 12.4.172 Occupational safety standards system. Individual screen set for protection from power frequency fields. General technical 1987 GOST 0
requirements and methods of control
2247 28117 PIPES FROM UNPLASTICIZED POLYVINYLCHLORIDE. TYPES AND RANGE OF PRODUCTS 1987 GOST 0
2248 22387.3 GAS FOR RESIDENTIAL AND PUBLIC USE Method for determination of oxygen content - Parcially Supersedes GOST 1987 GOST 0
5580-56; Incorporates Amendment 1: 12/1985
2249 27351 Industrial aggregate-module robots.Functional modules. General specifications 1987 GOST 0
2250 10433 Fuel oil for gas-turbine plants. Specifications - Incorporating Amendment 1, May, 1986 and Amendment 2: 1989 1987 GOST 0
2251 10313 Still picture camera. Accessory shoes and accessory feet. Design 1987 GOST 0
2252 19.301 Unified System of Program Documentation TEST PROGRAM AND PROCEDURE Requirements for contents and form 1987 GOST 0
of presentation - Amendments 1 and 2 February 1982
2253 19.001 UNIFIED SYSTEM OF PROGRAM DOCUMENTATION 1987 GOST 0
2254 27540 Thermochemical signalling devices of combustible gases and vapours. General specifications 1987 GOST 0
2255 27286 Power friction clutches with electromagnetic shifting. General specifications and test methods 1987 GOST 0
2256 27440 "Apparatus for softdrinks distribution for public catering establishments. Types, technical requirements and test methods" 1987 GOST 0
2257 22536.0 Carbon steel and unalloged cast iron. General requirements for methods of analysis 1987 GOST 0
2258 11929 ELECTRIC ROTATING MACHINES GENERAL TEST METHODS DETERMINATION OF NOISE LEVEL - Same as 1987 GOST 0
CMEA Standard 828-77
2259 19.501 Unified System of Program Documentation TECHNICAL AND OPERATIONAL DATA CARD Requirements for 1987 GOST 0
contents and form of presentation
2260 12785 Paper for electrolytic capacitors. Specifications 1987 GOST 0
2261 19.508 Unified System of Program Documentation MAINTENANCE MANUAL Requirements for contents and form of 1987 GOST 0
presentation
2262 21242 FLAT AND PIN TERMINAL LEADS OF ELECTRICAL DEVICES Basic dimensions - Incorporating Amendment 1: 1987 GOST 0
10/1978; Amendment 2: 04/1981; Amendment 3: 06/1986
2263 12.4.045 Occupational safety standards system. Men‫_آ‬s suits for protection against high temperatures. Specifications 1987 GOST 0
2264 21150 Grease Litol-24. Specifications 1987 GOST 0
2265 22536.8 Carbon steel and unalloyed cast iron. Methods for determination of cupper 1987 GOST 0
2266 12.2.024 Occupational safety standards system. Noise. Power oil-immersed trasformers. Norms and control methods 1987 GOST 0
2267 19.503 Unified System of Program Documentation SYSTEM PROGRAMMER MANUAL Requirements for the contents and 1987 GOST 0
form of presentation - Amendment 1, September 1981
2268 18510 Writing paper. Specifications 1987 GOST 0
2269 21639.12 Fluxes for electroslag remelting. Methods for determination of manganous oxide 1987 GOST 0
2270 19.404 Unified System of Program Documentation EXPLANATORY NOTE Requirements for contents and form of presentation 1987 GOST 0
2271 27422 Apparatus for nonkidney blood treatment. General specifications 1987 GOST 0
2272 9.010 UNIFIED SYSTEM OF PROTECTION AGAINST CORROSION AND AGEING COMPRESSED AIR FOR PAINT 1987 GOST 0
SPRAYING TECHNICAL REQUIREMENTS AND MONITORING METHODS - Incorporates Amendment 1: 06/1986
and Amendment 2: 12/1990
2273 1759.4 BOLTS, SCREWS AND STUDS MECHANICAL PROPERTIES AND TEST METHODS - ISO 898:1-1978 1987 GOST 0
2274 6134 Rotodynamic pumps. Methods of testing - Incorporating Amendment 1: 12/1989, Amendment 2: 4/1996, Corrigendum: 1987 GOST 0
1997
2275 4808 Hay. Specification 1987 GOST 0
2276 17479.4 Industrial oils. Classification and designation 1987 GOST 0
2277 27274 "Leather wringing machines types, main parameters, dimensions and requirements" 1987 GOST 0
2278 27529 Gas turbines energetic. Type. Number capacities 1987 GOST 0
2279 719 Canned milk. Natural coffee with condensed milk and sugar. Specifications - Incorporating Amendment 1: 2/1986 1987 GOST 0
2280 12261 Additive AFK. Specifications 1987 GOST 0
2281 20546 Fish preserves. Oceanic fish in spicy brine. Specifications - Incorporating Amendment 1: 6/1990, Corrigendum: 1990 1987 GOST 0
2282 27434 Industrial tractors. General specifications 1987 GOST 0
2283 1186 HARD COALS METHOD OF DETERMINATION OF PLASTOMETRIC PARAMETERS 1987 GOST 0
2284 3079 DOUBLE LAY ROPE OF TYPE TLK-O OF DESIGN 6X37 (1+6+15+15) +1 o. c. - Incorporates Amendment 1: 11/1986; 1987 GOST 0
Includes Amendment 2: 1993
2285 27282 Cellar batteries for poultry farming excrement removing system technical requirements 1987 GOST 0
2286 2.755 Unified system for design documentation. Graphical designation in electrical schemes. Switchgear devices and contact 1987 GOST 0
connections
2287 12.4.044 Occupational safety standards system . Women‫_آ‬s suits for protection against high temperatures. Specifications 1987 GOST 0
2288 19.105 Unified system for program documentation. General requirement for program documents - Amendment 1, September 1981 1987 GOST 0
2289 27537 Digital readout units. General specifications 1987 GOST 0
2290 17624 Concrete. Ultrasonic method of strength determination 1987 GOST 0
2291 4.204 PRODUCT QUALITY INDEX SYSTEM. CONSTRUCTION BINDING MATERIALS: LIME, GYPSUM AND 1987 GOST 0
BINDING AGENTS ON THEIR BASE INDICES LIST
2292 27415 Refuse collectiry vehicles. Specifications 1987 GOST 0
2293 27334 Garage jacks. Parameters 1987 GOST 0
2294 19.403 Unified System of Program Documentation LIST OF ORIGINALS HOLDERS 1987 GOST 0
2295 19098 Plotters for electronic computers. General specifications 1987 GOST 0
2296 19.104 Unified System of Program Documentation BASIC INSCRIPTIONS - Amendment 1; September 1981 1987 GOST 0
2297 16317 Household electrical refrigerating appliances. General specifications 1987 GOST 0
2298 22472 Dies for sheet-metal stamping. General technical conditions 1987 GOST 0
2299 24505 PROGRAMMED-CONTROLLED MEANS SYMBOLS ON CONTROL PANELS - Incorporates Amendments 1 and 2: 1987 GOST 0
March 1982
2300 19596 Shovels. Specifications 1987 GOST 0
2301 8050 Carbon Dioxide, Gaseous and Liquid Specifications - Incorporates Amendments 1 and 2 1987 GOST 0
2302 22536.5 Carbon steel and unalloyed cast iron. Methods for determination of manganese 1987 GOST 0
2303 20462 Men‫_آ‬s and boy‫_آ‬s knitted underwear. Specifications 1987 GOST 0
2304 27420 Synthetic materials for low shoe bottom parts. The method for determination of dynamic low temperature resistance 1987 GOST 0
2305 24444 TECHNOLOGICAL EQUIPMENT GENERAL REQUIREMENTS FOR ASSEMBLY ADAPTABILITY 1987 GOST 0
2306 1726 Fresh cucumbers. Specifications - Incorporating Amendment 1: 10/1986, Amendment 2: 5/1988, Amendment 3: 5/1989, 1987 GOST 0
Amendment 4: 11/1990; Corrigendum: 1991
2307 17.0.0.01 System of standards in nature protection and improving utilization of nature resources. General basic rules - Incorporating 1987 GOST 0
Amendment 1: 7/1979, Amendment 2: 8/1987
2308 24863 Magnetic tape recorders for domestic use. General specifications 1987 GOST 0
2309 21133 "Specilized box pellets for rotatoes, vegetables, fruits and melon cultures. Specifications" 1987 GOST 0
2310 27569 Fresh garlic for retail. Specifications 1987 GOST 0
2311 27377 Cellar batteries for poultry farming. Eggs collection system. Technical reguirements 1987 GOST 0
2312 25053 Emitters of apparatus for ultrasonic therapeutics. General specifications 1987 GOST 0
2313 27553 MOBILE LUFFING JIB CRANES OPERATING MODES CLASSIFICATION - (ISO 4301/2-85) 1987 GOST 0
2314 17675 Flexible electrical insulating tubes. General specifications 1987 GOST 0
2315 7669 DOUBLE LAY ROPE OF TYPE ,L,K-,Q,O OF DESIGN 6x36 (1+7+7/7+14) + 7x7 (1+6) - Incorporates Amendment 1: 1987 GOST 0
11/1986; Includes Amendment 2: 1993
2316 27551 MOBILE CRANES CONTROLS. GENERAL REQUIREMENTS - Incorporating Amendment No. 1: 11/1988 1987 GOST 0
2317 21357 CASTINGS MADE OF COLD- AND WEAR-RESISTANT STEEL General technical specifications - Includes 1987 GOST 0
Corrigendum: 1988
2318 27321 RACK-MOUNTABLE TUBULAR SCAFFOLD FOR CONSTRUCTION AND ASSEMBLY WORKS 1987 GOST 0
SPECIFICATIONS
2319 4495 Dry unskimmed milk. Specifications - Incorporating Amendment 1: 9/1991, Corrigendum: 1991 1987 GOST 0
2320 10459 Gummed tape base paper. Specifications 1987 GOST 0
2321 4.471 PRODUCT QUALITY INDICATOR SYSTEM IGNITING FUSE-PROTECTIVE DEVICES OF BOILERS 1987 GOST 0
INDICATORS NOMENCLATURE
2322 904 Women‫_آ‬s and girl‫_آ‬s knitted underwear General specifications 1987 GOST 0
2323 8907 Sandblast core casting machines. General specifications 1987 GOST 0
2324 16617 Household electric heating appliances. General specifications 1987 GOST 0
2325 27444 "Leather rolling machines, types, main parametres and dimensions, technical requirements" 1987 GOST 0
2326 27293 "Buffing footwear machines. Types,technical characteristics and requirements" 1987 GOST 0
2327 27258 Eath-moving machinery. Zones comfort and reach for controls 1987 GOST 0
2328 621 Piston rings for internal combustion engines. General specifications 1987 GOST 0
2329 19.401 Unified system of program documentation PROGRAM TEXT Requirement for contents and form of presentation - 1987 GOST 0
Amendment 1, March 1983
2330 9557 Flat timber pallet with dimensions 800 x 1200 mm. Specifications 1987 GOST 0
2331 12112 BROWN COALS METHOD FOR DETERMINATION OF PETROGRAPHIC COMPOSITION - Incorporates 1987 GOST 0
Amendment 1: 1983, Amendment 2: 1987, and Amendment 3:2004
2332 27380 Section electrical insulating fiber-glass reinforced plastics. General specifications 1987 GOST 0
2333 12124 CENTRIFUGAL OIL PUMPS FOR MAIN PIPELINES TYPES AND KEY PARAMETERS 1987 GOST 0
2334 27570.0 Safety of household and similar electrical appliances. General requirements and test methods 1987 GOST 0
2335 19.102 Unified System of Program Documentation DEVELOPMENT STAGES 1987 GOST 0
2336 4.468 QUALITY INDICATOR SYSTEM CAST-IRON MODULAR ECONOMIZERS PRODUCT INDICATORS 1987 GOST 0
2337 27265 TITANIUM AND TITANIUM-ALLOY WELDING WIRE SPECIFICATIONS - Includes Amendment 1: 1991 1987 GOST 0
2338 7967 Fresh red cabbage. Specifications 1987 GOST 0
2339 19.201 Unified System of Program Documentation REQUIREMENTS SPECIFICATION. REQUIREMENTS FOR CONTENTS 1987 GOST 0
AND FORM OF PRESENTATION - Amendment 1, June 1981
2340 17228 Passanger and transport acroplanes. Acceptable noise levels on ground 1987 GOST 0
2341 13.2.008 Reprography. Copirography. Diazotype paper. Specifications 1987 GOST 0
2342 27295 Circular knitting machines. Technical requirements and testing methods 1987 GOST 0
2343 22536.11 Carbon steel and unalloyed cast iron. Methods for determination of titanium 1987 GOST 0
2344 8617 EXTRUDED PROFILES MADE OF ALUMINUM AND ALUMINUM ALLOYS SPECIFICATIONS - (CMEA Standard 1987 GOST 0
3843-82 and CMEA Standard 3844-82); Incorporates Amendment 1: 12/1983, Amendment 2: 06/1987, and Amendment 3:
07/1987
2345 4.215 PRODUCT QUALITY INDEX SYSTEM. CONSTRUCTION WINDOW AND DOOR FITTINGS RANGE OF INDICES 1987 GOST 0
2346 22387.4 GAS FOR RESIDENTIAL AND PUBLIC USE Method for determination of tar and dust content - Parcially supersedes 1987 GOST 0
GOST 5580:1956; Incorporates Amendment 1: 12/1986
2347 2124 Chlorsulphonic acid for industrial use. Specifications 1987 GOST 0
2348 27386 Electrical insulating film-containing materials. General specifications 1987 GOST 0
2349 16361 Wood flour. Specifications 1987 GOST 0
2350 18300 Technical rectified ethyl alcohol. Specifications 1987 GOST 0
2351 24838 Domestic radioelectronic equipment. Input and output parameters 1987 GOST 0
2352 24593 Graphic input devices for electronic computers. General specifications 1987 GOST 0
2353 4.473 PRODUCT QUALITY INDICATORS SYSTEM DRAFT MACHINES INDICATORS NOMENCLATURE 1987 GOST 0
2354 27304 Machines with numerical control. Adjustable arbours for face-and-side millind cutters. Basic dimensions and techical 1987 GOST 0
requirements
2355 19.602 Unified system of program documentation RULES FOR DUPLICATION, REGISTRATION AND STORAGE OF 1987 GOST 0
PRINTED PROGRAM DOCUMENTS
2356 6793 PETROLEUM PRODUCTS METHOD FOR DETERMINATION OF DROPPING POINT - Incorporates Amendments 1: 1987 GOST 0
05-1979; Amendment 2: 06/1984 and Amendment 3 06/1986: Incorported Corrigendums; 07/1979, 11/1984 and 10/1986
2357 5007 Knitted gloves. General specification 1987 GOST 0
2358 27573 Fresh pomegranates. Specifications 1987 GOST 0
2359 19.402 Unified system of program documentation PROGRAM DESCRIPTION - Amendment 1, Septenber 1981 1987 GOST 0
2360 27453 Luminaires for swimming pools and similar applications. Specifications 1987 GOST 0
2361 27407 Piston opposite compressors. Acceptable levels and methods of determination of noise characteristics 1987 GOST 0
2362 27266 Molybdenum wire for light sources. Specifications 1987 GOST 0
2363 27310 Potato combine. Jeneral technical requirements 1987 GOST 0
2364 12.2.052 OCCUPATIONAL SAFETY STANDARDS SYSTEM - EQUIPMENT OPERATING WITH GASEOUS OXYGEN - 1987 GOST 0
GENERAL SAFETY REQUIREMENTS - Incorporating Amendment 1: 03/1987
2365 21834 High precision heavy duty trahsmission roller chains. Specifications 1987 GOST 0
2366 20917 "Aircraft containers. Types, basic parameters and dimensions" 1987 GOST 0
2367 27575 Men‫_آ‬s suits for general industrial contamination and mechanical action protection. Specifications 1987 GOST 0
2368 27461 Cellar battaries for poultry farming. Coops. Main parameters and technical requirements 1987 GOST 0
2369 27270 Fork-lift elektro- and autoloaders used in containers and boxcars. Basis parameters and technical requirements 1987 GOST 0
2370 20839 ROTATING ELECTRIC MACHINES WITH SHAFT HEIGHT FROM 450 TO 1000 MM MOUNTING DIMENSIONS - 1987 GOST 0
AMD 1: 07/1977; AMD 2: 07/1987; AMD 3:04/24/1990
2371 27303 Steam and hot water boilers. Regulations of acceptance after the mounting 1987 GOST 0
2372 19.103 Unified System of Program Documentation DESIGNATION OF PROGRAMS AND PROGRAM DOCUMENTS 1987 GOST 0
2373 19.202 Unified system of program documentation SPECIFICATION Requirements for contents and form of presentation - 1987 GOST 0
Amendment 1, September 1981
2374 22387.5 GAS FOR RESIDENTIAL AND PUBLIC USE Methods for determination of odor intensity - Parcially supersedes GOST 1987 GOST 0
5580:1956; Incorporates Amendment 1: 12/1986
2375 27574 Women‫_آ‬s suits for general industrial contamination and mechanical action protection. Specifications 1987 GOST 0
2376 27267 Non-diluted fresh sperm collected from cocks and turkes-cocks. Technical requirements and test methods 1987 GOST 0
2377 27450 COPPER AND COPPER -ZINC ALLOY TUBES INTERNAL SURFACE CLOGGING DETERMINATION METHOD 1987 GOST 0
2378 21105 Non-destructive testing. Method of magnetic particle testing 1987 GOST 0
2379 24599 Rope grab buckets for lcading in bulk. General specifications 1987 GOST 0
2380 20459 ELECTRIC ROTATING MACHINES METHODS OF COOLING. DESIGNATIONS - IEC 34-6-69, CMEA Standard 1987 GOST 0
1953-79
2381 22536.2 Carbon steel and unalloyed cast iron. Methods for determination of sulphur 1987 GOST 0
2382 27306 Programmators for household electrical washing machines and dishwashers. General specification 1987 GOST 0
2383 8510 Hot-rolled steel unequal-leg angles. Dimensions 1986 GOST 0
2384 7181 Pickled tomatoes. Specifications - Incorporates Amendment 1: 3/1985, Amendment 2: 2/1990, Corrigendum: 1990 1986 GOST 0
2385 17242 Low-voltage power fuses. General specifications 1986 GOST 0
2386 4.420 PRODUCT QUALITY INDEX SYSTEM DRESSED FUR SKINS INDEX NOMENCLATURE 1986 GOST 0
2387 12.2.113 Occupational safety standards system. Crank presses. Safety requirements - Incorporating Amendment 1: 8/1987, 1986 GOST 0
Corrigendum: 1987
2388 27048 "Intensifying medical screens. Basic parameters, general technical requirements and methods of test" 1986 GOST 0
2389 14658 Positive-displacement pumps for hydraulic drives. Acceptance rules and methods of testing 1986 GOST 0
2390 15140 PAINTWORK MATERIALS METHODS OF ADHESION DETERMINATION - CMEA Standard 2545-80; Incorporates 1986 GOST 0
Amendment 1: 11/1982, Amendment 2: 06/1986
2391 17473 Half-rounded head screws of accuracy classes A and B. Design and dimensions - Incorporates Amendment 1: 12,1981; 1986 GOST 0
Amendment 2: 4,1986
2392 26743.7 CAPROLACTAM DETERMINATION OF PERMANGANATE INDEX - CMEA Standard 5103-85 1986 GOST 0
2393 13303 High molecular polyisobutylene. Specifications 1986 GOST 0
2394 21786 "MAN-MACHINE" SYSTEM NONVERBAL ACOUSTIC SIGNALIZERS GENERAL ERGONOMIC 1986 GOST 0
REQUIREMENTS
2395 27053 Nc machine tools. Adjustable adapters with internal morse tapes and cilindrical shank. Main dimensions and specifications 1986 GOST 0
2396 12.2.114 Occupational safety standards system. Serew process. Safety requirements 1986 GOST 0
2397 17770 Hand-holding machines. Vibration characteristics requirements 1986 GOST 0
2398 7453 Preserves of gutted fish. Specifications 1986 GOST 0
2399 17717 LOAD-BREAK SWITCHES WITH DESIGN AC VOLTAGE FROM 3 TO 10 kV General specifications - Incorporating 1986 GOST 0
Amendment 1: 1/1982; Amendment 2: 7/1986; Amendment 3: 12/21/1990
2400 9.032 UNIFIED SYSTEM OF CORROSION AND AGEING PROTECTION PAINTWORK COATINGS GROUPS, 1986 GOST 0
TECHNICAL REQUIREMENTS AND DESIGNATIONS - Incorporating Amendment 1: 06/1976, Amendment 2:
03/1980, and Amendment 3: 02/1986; Includes Amendment 4: 03/1989
2401 12.3.009 System of Occupational Safety Standards CARGO HANDLING General Safety Requirements - Incorporates Amendment 1986 GOST 0
1:08/1982; CMEA Standard 3518-81
2402 22253 SPRING-FRICTION DRAFT GEARS FOR 1520 mm GAUGE RAILWAY ROLLING STOCK SPECIFICATIONS - 1986 GOST 0
Incorporates Amendments 1:06/1980, Amendment 2:12/1981, Amendment 3:01/1984, Amendment 4:10/1985, and
Amendment 5:01/1991
2403 26952 Fire-extinguishing powders. General technical requirements and test methods 1986 GOST 0
2404 18620 Electrotechnical articles. Marking 1986 GOST 0
2405 16290 Cooked and smoked sausages. Specifications 1986 GOST 0
2406 8027 Straight-sided flank spline shaft hobs. Specifications 1986 GOST 0
2407 27047 "Fluoroscopic screens. Basic parameters, general technical requirements and methods of test" 1986 GOST 0
2408 2.701 Unified system design documentation. Schemes. Kinds and types. General requirements to presentation - Includes 1986 GOST 0
Amendment 1: 1989 and Amendment 2: 1991
2409 2838 Spanners. General specifications - Incorporating Amendment 1: 3/1982, Corrigendum: 1988 1986 GOST 0
2410 12.3.004 Occupational Safety Standards System HEAT TREATMENT OF METALS General Safety Requirements - Incorporating 1986 GOST 0
Amendment 1: 8/1982
2411 11262 PLASTICS Tension test method - Includes Amendment 1: 9/1985 1986 GOST 0
2412 17035 PLASTICS METHODS FOR MEASURING THICKNESS OF PLASTIC FILMS AND SHEETS 1986 GOST 0
2413 27147 Hog transmissible gastroenteritis (tge) viral vaccine cultivated. Technical requirements and test methods 1986 GOST 0
2414 26926 Amateur slide projectors. General specifications 1986 GOST 0
2415 18105 Concretes. Rules for the strength control 1986 GOST 0
2416 15130 Silica optical glass. General specifications 1986 GOST 0
2417 27043 "Cubicles for thyristor electric drives. Classification, overall dimensions, and specifications" 1986 GOST 0
2418 9758 NON-ORGANIC POROUS AGGREGATES FOR CONSTRUCTION WORKS. Test Methods 1986 GOST 0
2419 26820 Auxiliary power-plants of passenger and transport aircrafts. Acceptable noise levels made at the country and determination 1986 GOST 0
method
2420 11930.1 SURFACING MATERIALS CARBON DETERMINATION METHODS - Incorporating Amendment 1: December 1984; 1986 GOST 0
Amendment 2: December 1989
2421 22130 STEEL PIPELINE COMPONENTS MOVABLE SUPPORTS AND HANGERS SPECIFICATIONS 1986 GOST 0
2422 16511 Wooden boxes for products of electrotechnical industry. Specifications - Incorporating Amendment 1: 5/1988 1986 GOST 0
2423 13521 WINDOW GLASSES OF PASSENGER CARS, ELECTRIC TRAINS AND DIESEL TRAINS Basic dimensions and 1986 GOST 0
technical requirements - Incorporating Amendment 1: 9/1971; Amendment 2: 12/1984; Amendment 3: 5/1986
2424 19505 Plastic casting patterns and core boxes. Technical requirements 1986 GOST 0
2425 26899 Technical diagnostics. The chassis dynamometers for parameters determination of pull-speed characteristics and fuel 1986 GOST 0
economy of vehicles and wheeled tractors in operating conditions. General technical requirements
2426 6645 Saw blades for metal cutting 1986 GOST 0
2427 17475 Countersunk head screws of accuracy classes A and B. Design and dimensions - Incorporates Amendment 1: 12,1981; 1986 GOST 0
Amendment 2: 04,1986
2428 5546 Oils for refrigerating machines. Specifications 1986 GOST 0
2429 27146 Antigene revealing infections sheep‫_آ‬s epididymitis caused by Brucella ovis. Technical requirements and test methods 1986 GOST 0
2430 27038 Powered face sistems. General safety requirements 1986 GOST 0
2431 26891 "Aerosol valves, spraying tops and caps. Specifications" 1986 GOST 0
2432 13297 Diamond cutting tools and inserts. Technical reqirements 1986 GOST 0
2433 10533 Cold-rolled thermostatic bimatallic strip. Specifications 1986 GOST 0
2434 5541 Corking means. Technical requirements - Incorporates Amendment 1: 1978 and Amendment 2: 1982 1986 GOST 0
2435 14782 Nondestructive testing. Welded joints. Ultrasonic methods 1986 GOST 0
2436 7850 Caprolactam Specifications - Amendment 1:1989; Amendment 2:1992; Amendment 3: 1994 1986 GOST 0
2437 12.2.047 OCCUPATIONAL SAFETY STANDARDS SYSTEM FIRE ENGINEERING TERMS AND DEFINITIONS 1986 GOST 0
2438 26987 "White bread from wheat flour of high, first and second grades. General specification" 1986 GOST 0
2439 27145 Antigene and antiserum for diagnosis of equine infections. Technical requirements and test methods 1986 GOST 0
2440 16351 Semi-smoked sausages. Specifications 1986 GOST 0
2441 13502 Paper packets for loose products. Specifications - Incorporating Amendment 1: 12/1991 1986 GOST 0
2442 27172 Detector sets of ionizing radiations for spectrometry. Types and general parameters 1986 GOST 0
2443 26830 Semiconductor reformers of electroenergy with power including to 5 kV x A. General specifications 1986 GOST 0
2444 27154 Fuel for Jet Engines Test Method for Interaction with Water - (CMEA Standard 5022-85); 1986 GOST 0
2445 26336 TRACTORS AND AGRICULTURAL MACHINERY SYSTEM OF SYMBOLIC IDENTIFICATION FOR OPERATING 1986 GOST 0
CONTROLS AND MEANS FOR DISPLAYING INFORMATION SYMBOLS - Incorporates Amendment 1: 1986 and
Includes Amendment 2: 1992
2446 27073 Industrial apparatus of continious and quasicotinious action for dust emission determination. Specifications 1986 GOST 0
2447 12.2.116 Occupational safety standards system. Three and four-roil plate-bending machines. Safety requirements 1986 GOST 0
2448 20680 Vertical apparatus with mechanical agitating devices. General technical requirements 1986 GOST 0
2449 4.456 Product-quality index system. Metal forming machines. Index nomenclature 1986 GOST 0
2450 15.005 System of products development and launching into manufacture. Defelopment of single and small-scale production units 1986 GOST 0
assembled at the place of use
2451 27072 Audio signal diagnostic generators. Audiometers. General technical requirements and testing methods 1986 GOST 0
2452 12.2.115 Occupational safety standards system. Blow-out preventer equipment. Safety requirements 1986 GOST 0
2453 4.411 PRODUCT QUALITY INDICATORS SYSTEM COMPLETE SETS OF SHAPED PARTS, ASSEMBLY UNITS AND 1986 GOST 0
PIPELINE BLOCKS (PIPE UNITS) OF HEAT POWER PLANT (HPP) AND ATOMIC POWER PLANT (APP)
DESIGNED FOR PRESSURE OF 2.2 ‫_أ‬Pa AND HIGHER INDICATORS NOMENCLATURE
2454 4.432 Product-quality index system. Stationary gas-turbine plants. Index nomenclature 1986 GOST 0
2455 27164 Special instrumentation for operational monitoring bearing vibration in large stationary aggregates. Technical requirements 1986 GOST 0
2456 26955 Agricultural mobile machinery. Rates of force produced by propelling agents on soil 1986 GOST 0
2457 26826 Limestone meal for the manufacture of mixed fud and the feed up of agriculural animals and poultry. Specifications 1986 GOST 0
2458 11930.8 HARD-FACING MATERIALS METHOD FOR PHOSPHORUS DERERMINATION - Incorporating Amendment 1: 1986 GOST 0
December 1984; Amendment 2: December 1989
2459 17.1.3.13 Protection of nature. Hydrosphere GENERAL REQUIREMENTS FOR SURFACE WATERS PROTECTION AGAINST 1986 GOST 0
POLLUTION
2460 534 OVERHEAD TRAVELING CRANES. SPANS - (CMEA Standard 5235-851); Incorporates Amendment 1: 09/1983 and 1986 GOST 0
Amendment 2: 04/1986
2461 13663 Shaped steel tubes. Technical requirements 1986 GOST 0
2462 17398 PUMPS TERMS AND DEFINITIONS 1986 GOST 0
2463 3858 Sauerkraut. Specifications - Incorporating Amendment : 3/1985, Amendment 2: 2/1990; Corrigendum: 1990 1986 GOST 0
2464 1491 SCREWS WITH CYLINDRICAL CAP OF ACCURACY CLASSES A AND B Design and dimensions - (CMEA 1986 GOST 0
Standard 2653-80); Incorporates Amendment 1 and 2: 12,1981;
2465 26807 AIRBORNE DIGITAL EQUIPMENT FOR AIRPLANES AND HELICOPTERS METHODS OF BENCH FUNCTIONAL 1986 GOST 0
TEST UNDER CONDITIONS OF ELECTROMAGNETIC ACTIONS - Amendment 1: 08/11/1992
2466 26858 Electrical insulating mica paper. General specification 1986 GOST 0
2467 12355 ALLOYED AND HIGH-ALLOY STEELS METHODS OF DETERMINATION OF COPPER - Incorporating Amendment 1986 GOST 0
1: August 1984
2468 26222 Ionizing-radiation semiconductor detectors. Methods of parameters measurement 1986 GOST 0
2469 13513 Boxes made of corrugated board for dairy and milk industry production. Specifications 1986 GOST 0
2470 22133 "Paint coatings of metal-cutting, press-forging, foundry and wood-working equipment. General requirements" 1986 GOST 0
2471 2584 Copper and copper alloys trolley wires. Specifications 1986 GOST 0
2472 18397 A. c. high-voltage circuit-breakers rated voltages 6-220 kV for frequent switching operations. General specifications 1986 GOST 0
2473 1654 Lathe chucks of general purpose. General specifications 1986 GOST 0
2474 4.424 Product Quality Indicators System STATIONARY STEAM TURBINES Product Indicators - Incorporating Amendment 1: 1986 GOST 0
9/1987
2475 27174 Vented alkaline nickel-cadmium rechargeable cells and storage batteries of capacity up to 150 A x h. General specification 1986 GOST 0
2476 982 Transformer oils. Specifications - Incorporating Amendment 1: 3/1982, Amendment 2: 3/1985, Corrigendum: 1988 1986 GOST 0
2477 4.429 PRODUCT QUALITY INDICATORS SYSTEM HEAT-EXCHANGE EQUIPMENT OF THERMAL POWER 1986 GOST 0
STATIONS INDICATORS RANGE
2478 2824 Electrical insulation board. Specifications 1986 GOST 0
2479 26840 Ventilating electrical-and-hand units. Specifications 1986 GOST 0
2480 2665 Nickel sulfate technical. Specifications 1986 GOST 0
2481 27173 Detector sets of ionizing radiations for spectrometry. General technical specification 1986 GOST 0
2482 26982 Lovers bread. Specifications 1986 GOST 0
2483 13907 Egg-plants fresh. Specifications 1986 GOST 0
2484 26927 FOOD RAW MATERIALS AND FOODSTUFFS MERCURY CONTENT MEASUREMENT METHODS 1986 GOST 0
2485 11529 POLYVINYLCHLORIDE MATERIALS FOR FLOORS MONITORING METHODS - Incorporates Amendment 1: 1986 GOST 0
05/1998;: 1978
2486 13781.0 Power cable couplings for tension up to 35 kV including. General technical requirements 1986 GOST 0
2487 27095 Meat. Horse meat and young horse meat in half-carcasses and quarters. Specifications 1986 GOST 0
2488 6727 Cold-drawn low-carbon steel wire for reinforced concrete. Specifications - Incorporating Amendment 1: 12/1984; Includes 1986 GOST 0
Amendment 2: 6/1987, Amendment 3: 1988, Amendment 4: 1990
2489 26930 EDIBLE RAW MATERIALS AND FOODSTUFFS Method of arsenic test - (In place of GOST 5512-50) 1986 GOST 0
2490 591 SPROCKETS FOR DRIVE ROLLER AND SLEEVE CHAINS METHODS FOR CALCULATION AND 1986 GOST 0
CONSTRUCTION OF TOOTH AND CUTTING TOOL PROFILES. TOLERANCES - Incorporates Amendments 1:
06/1980, Amendment 2: 06/1982: Amendment 3; 08/1986: Incorporated Corrigendum 1: 8/1980, Corr
2491 12133 Nutria skins dressed. Specifications 1986 GOST 0
2492 15180 FLEXIBLE FLAT GASKETS Key parameters and dimensions 1986 GOST 0
2493 26819 REINFORCED CONCRETE PRESSURE PIPES WITH STEEL MANDREL. SPECIFICATIONS 1986 GOST 0
2494 27181 Abrasive cloth and paper for hardworking materials. Specifications 1986 GOST 0
2495 26875 Vibration. Portable balancing equipment. Technical requirements 1986 GOST 0
2496 5709 Paper used for cigarettes. Specifications 1986 GOST 0
2497 17.2.2.04 Nature protection. Atmosphere. Civil aviation aeroplane gas-turbine engines. Norms and methods of contaminant ejection 1986 GOST 0
determination
2498 26953 AGRICULTURAL MOBILE MACHINES Methods for Determination of Mover Effect on Soil 1986 GOST 0
2499 27120 General purpose rotor drum furnaces for chemical plants. Basic parameters and dimensions 1986 GOST 0
2500 16120 Weak-current time relays. General specifications 1986 GOST 0
2501 2016 Thread gauges. Specifications 1986 GOST 0
2502 16569 Burners for domestic gas heaters. Specifications 1986 GOST 0
2503 7625 Paper for labelling. Specification 1986 GOST 0
2504 26932 FOOD RAW MATERIALS AND FOODSTUFFS Lead content measurement method 1986 GOST 0
2505 18051 Wooden package for heat-insulating materials and products. Specifications - Incorporating Amendment 1: 1/1984, 1986 GOST 0
Amendment 2: 11/1985, Amendment 3: 3/1988, Amendment 4: 10/1994
2506 22161 MARINE MACHINES, MECHANISMS, BOILERS, VESSELS AND APPARATUS HYDRAULIC AND AERIAL 1986 GOST 0
PERFORMANCE TEST CODE - AMD 1:12/1979; AMD 2: 09/1982; AMD 3: 12/1985; AMD 4: 12/1989
2507 7180 Pickled cucumbers. Specifications - Incorporating Amendment 1: 3/1985, Amendment 2: 10/1986, Corrigendum: 1987, 1986 GOST 0
Amendment 3: 2/1980, Corrigendum: 1990
2508 2999 METALS AND ALLOYS Vickers hardness tests - Incorporating Amendment 1: 5/1979 and Amendment 2: 9/1985 1986 GOST 0
2509 24566 "Flat plug-in connectors. Basic dimensions, technical requirements and test methods" 1986 GOST 0
2510 26881 Stationary lead-acid cells. General specifications 1986 GOST 0
2511 27021 AGRICULTURAL AND FORESTRY TRACTORS Drawbar categories 1986 GOST 0
2512 27206 "Stable isotope compounds and products. Acceptance, marking, packing, transportation and storage" 1986 GOST 0
2513 27133 Reeled laminated electrical insulating materials. General specifications 1986 GOST 0
2514 16121 Weak-current electromagnetic relays. General specifications 1986 GOST 0
2515 26985 Rossiysky bread. Specifications 1986 GOST 0
2516 6749 Base papers for wall-paper. Specifications 1986 GOST 0
2517 26886 Digital channels and group interfaces in the basic network of the unified automatic communication network. General 1986 GOST 0
parameters
2518 4937 Conned milk. Condensed cream with sugar. Specifications - Incorporating Amendment 1: 2/1986 1986 GOST 0
2519 18573 Wooden cases for products of chemical industry. Specifications - Incorporating Amendment 1: 4/1990, Amendment 2: 1986 GOST 0
10/1993, Corrigendum: 1994
2520 4.426 Product Quality Indicators System STEAM TURBINES SUPPORT EQUIPMENT Product indicators 1986 GOST 0
2521 8486 Coniferous sawn timber. Specifications 1986 GOST 0
2522 7211 Cold chisels. Specifications 1986 GOST 0
2523 4491 Cast wheel centres for railway rolling stock of 1520 mm gauge. General specifications 1986 GOST 0
2524 4.422 Product-quality indicators system. Stationary steam boilers. Indicators nomenclature 1986 GOST 0
2525 27134 Drying apparatus with rotary drums. Basis parameters and dimensions 1986 GOST 0
2526 16131 Dry sausages. Specifications 1986 GOST 0
2527 19132 Terminal contact blocks. General specifications 1986 GOST 0
2528 22407 Electric machines. Rotating from 63 to 355 gabarit including generators synchronized explicit-poled of general purpose. 1985 GOST 0
General specifications
2529 18256 "Pork products, smoked-baked. Specifications" 1985 GOST 0
2530 16264.4 Direct current contactless motors. General specifications 1985 GOST 0
2531 8740 Linerboard. Specifications 1985 GOST 0
2532 16818 Sandform for manufacturing of sample billets for testing the lamellar graphite grey cast iron mechanical properties. 1985 GOST 0
Dimensions and technical requirements
2533 739 2-mercaptobenzothiazole. Specifications - Incorporates Amendment 1: 02/1981 and Amendment 2: 04/1985; Includes 1985 GOST 0
Amendment 3: 1987 and Amendment 4: 07/1990
2534 11851 OIL. Method of paraffin determination 1985 GOST 0
2535 6625 Mine auxiliary fans. Specifications 1985 GOST 0
2536 26445 Insulated power wises. General specifications 1985 GOST 0
2537 26590 "Ferroalloys. Packing, transportation and storage" 1985 GOST 0
2538 16264.3 Commutator motors. General specifications 1985 GOST 0
2539 23468 Microcalculators. General specifications 1985 GOST 0
2540 16349 Cycling mixers for building materials. Specifications 1985 GOST 0
2541 19126 Medical metallic instruments. General specifications - Incorporating Amd 1: 7/1982, Amd 2: 3/1983, Amd 3: 10/1984; 1985 GOST 0
Amd 4: 10/1984, Amd 5: 9/1986, Amd 6: 9/1987, Amd 7: 4/1990, Corrigendum: 1990
2542 7377 Paper for corrugating. Specifications 1985 GOST 0
2543 10623 Dressed sealskins. Specifications 1985 GOST 0
2544 26567 SEMICONDUCTOR ELECTRIC POWER CONVERTERS ELECTRIC TEST METHODS 1985 GOST 0
2545 8292 Oil and paste colour paints. Specifications 1985 GOST 0
2546 10731 SURFACE-TYPE EVAPORATORS FOR STEAM-TURBINE POWER STATIONS GENERAL SPECIFICATIONS - 1985 GOST 0
Incorporating Amendment 1: 1989 and Amendment 2: 1991
2547 26437 Bare flexible wires. General specifications 1985 GOST 0
2548 26585 Pneumatic types for off-the-road trucks technical condition. Specifications 1985 GOST 0
2549 5710 Wool sheepskin and velour garments. General technical conditions 1985 GOST 0
2550 16594 "Park products, raw-smoked. Specifications" 1985 GOST 0
2551 9161 Harness wire. Specifications 1985 GOST 0
2552 22687.0 CENTRIFUGED REINFORCED CONCRETE POSTS FOR TOWERS OF HIGH-VOLTAGE POWER TRANSMISSION 1985 GOST 0
LINES Specifications
2553 26544 WOOD PROTECTION AGENTS CORROSION ACTIVITY EVALUATION METHOD - CMEA Standard 4685-841 1985 GOST 0
2554 18255 Pork products smoked-cooked. Specifications 1985 GOST 0
2555 12966 Technical purified aluminium sulphate. Specifications 1985 GOST 0
2556 26772 ROTATING ELECTRICAL MACHINES Leads marking and direction of rotation - Incorporating Amendment 1: 10/1988 1985 GOST 0
2557 26584 Road safety. Helmets for motocyclists. Specifications 1985 GOST 0
2558 26415 Weak-current cords. General specifications 1985 GOST 0
2559 7817 FIT BOLTS WITH HEXAGON REDUCED HEAD OF ACCURACY CLASS A DESIGN AND DIMENSIONS - (CMEA 1985 GOST 0
Standard 4730-84); Incorporating Amendment 1: 07/1983 and Amendment 2: 03/1985
2560 6627 SINGLE HOOKS. BLANKS TYPES. DESIGN AND DIMENSIONS - Incorporates Amendment 1: 12/1984 and 1985 GOST 0
Amendment 2: 04/1985
2561 16264.2 Synchronous motors. General specifications 1985 GOST 0
2562 7178 "Musk-melons, fresh. Specifications" 1985 GOST 0
2563 26054 Industrial robots for contact welding. General specifications 1985 GOST 0
2564 26582 FOOD MACHINES AND EQUIPMENT GENERAL SPECIFICATIONS 1985 GOST 0
2565 26678 Electric domestic compression refrigrators and freezers of parameter series. General specification 1985 GOST 0
2566 12.4.155 Occupational safety standards system. Earth leakage circuit breakers. Classification. General technical requirements 1985 GOST 0
2567 9124 Tinned band steel wire. Specifications 1985 GOST 0
2568 18236 "Pork products, cooked. Specifications" 1985 GOST 0
2569 7616 Hard rennet cheeses. Specifications 1985 GOST 0
2570 9438 POLYVINYLBUTYRAL ADHESIVE FILM Specifications 1985 GOST 0
2571 10111 Diamond tools of glass cutter 1985 GOST 0
2572 16264.1 Induction motors. General specifications 1985 GOST 0
2573 20 Rubber conveyer belts. Specifications 1985 GOST 0
2574 16773 Ferroniobium. Specifications 1985 GOST 0
2575 1692 Chlorinated lime. Specifications 1985 GOST 0
2576 26413.0 Power connecting wires and cords. Specifications 1985 GOST 0
2577 17544 GENERAL PURPOSE POWER OIL TRANSFORMERS OF VOLTAGE CLASSES 220, 330, 500 AND 750 KV 1985 GOST 0
Specifications - Incorporating Amendment 1: 05/87
2578 14311 Steel cord. Specifiucations 1985 GOST 0
2579 6533 ELLIPTIC FLANGED STEEL BOTTOMS FOR VESSELS, APPARATUS AND BOILERS BASIC DIMENSIONS - 1985 GOST 0
Incorporating Amendment 1: 06/1984; Amendment 2: 02/1989
2580 4.58 "System of product quality indices. Pressure gauges, vacuum gauges, pressure-and-vacuum gauges, braught gauges, head 1985 GOST 0
gauges, draught-and-head gauges. Nomenclature of indices"
2581 20295 Steel welded pipes for main gas-and-pil pipelines. Specifications 1985 GOST 0
2582 17122 Diamond grinding points. Specifications 1985 GOST 0
2583 24638 Diamond circular drills. Specifications 1985 GOST 0
2584 18918 Ammophos. Specifications 1985 GOST 0
2585 26527 Mercury-zinc cells and batteries. General specification 1985 GOST 0
2586 3900 OIL AND OIL PRODUCTS Methods of density determination - Incorporating Amendment 1: 12/1990; Includes 1985 GOST 0
Corrigendum: 1999; Includes Corrigendum: 2010
2587 10751 Cable electrical conductive paper. Specifications 1985 GOST 0
2588 18690 CABLES, WIRES, CORDS AND CABLE ACCESSORIES MARKING, PACKING, TRANSPORTATION AND 1985 GOST 0
STORAGE
2589 22827 Self-propelled boom for general purposes. Technical conditions 1985 GOST 0
2590 26411 Control cables. General specifications 1985 GOST 0
2591 2517 OIL AND OIL PRODUCTS METHODS OF SAMPLING - Incorporating Amendment 1: 8/1998, Corrigendum: 1999 1985 GOST 0
2592 23982 Equipment for distributing solid organic fertilizers. General specifications 1985 GOST 0
2593 13345 Tin plate and black plate. Specifications 1985 GOST 0
2594 23279 WELDED MESH REINFORCEMENT FOR REINFORCED CONCRETE STRUCTURES AND PRODUCTS General 1985 GOST 0
Specifications
2595 17482 "Pork products, baked and fried. Specifications" 1985 GOST 0
2596 25034 Screw contact terminals. Classification. Requirements. Test methode 1985 GOST 0
2597 21251 Pneumatic directional control valves spool type with 5 ports for pn=10 bar 1985 GOST 0
2598 13207 Food ration for life boats and rafts of marine vessels. Specification 1985 GOST 0
2599 17479.2 Transmission oils. Classification and designation 1985 GOST 0
2600 7293 Spheroidal graphite iron for castings. Grades 1985 GOST 0
2601 22521 "Pressure, vacuum and pressure difference transmitters with pneumatic analog output signal of SSI. General specifications" 1985 GOST 0
2602 26641 Atraumatic needles. General technical requirements and test methods 1985 GOST 0
2603 26499 Universal kitchen household machines. General specifications 1985 GOST 0
2604 8220 Underground file hydrants. Specifications 1985 GOST 0
2605 20264.0 ENZYME PREPARATIONS Acceptance procedure and sampling methods - Incorporating Amendment 1: 2/1982 1985 GOST 0
2606 26532 SIGNAL CONVERSION EQUIPMENT OF DATA COMMUNICATION EQUIPMENT FOR NON-SWITCHED 1985 GOST 0
CHANNELS OF VOICE FREQUENCY TYPES AND KEY PARAMETERS - AMD 1: 8/1987
2607 2.710 Unified system for design documentation. Alpha-numerical designations in electrical diagrams - Incorporating Amendment 1985 GOST 0
1: 1989
2608 5775 Condenser oil. Specification 1985 GOST 0
2609 10885 Hot-rolled corrosion-resistant clad steel sheets. Specifications 1985 GOST 0
2610 12.2.004 OCCUPATIONAL SAFETY STANDARDS SYSTEM - SPECIAL MACHINES AND MECHANISMS FOR PIPELINE 1985 GOST 0
CONSTRUCTION - SAFETY REQUIREMENTS - Incorporates Amendment 1: 12/1980, Amendment 2: 06/1985;
Amendment 3: 1987
2611 9227 Cleaning shot-blasting periodic-action conveyor barrels. Basic parameters and dimensions 1985 GOST 0
2612 8489 ENGINE FUEL METHOD FOR DETERMINATION OF ACTUAL GUMS (ACCORDING BUDAROV) 1985 GOST 0
2613 1585 Antifriction iron for castings. Grades 1985 GOST 0
2614 22687.2 CYLINDRICAL SPUN FERROCONCRETE POSTS FOR TOWERS OF HIGH-VOLTAGE TRANSMISSION LINES 1985 GOST 0
Design and Dimensions
2615 17479.3 Hydraulic oils. Classification and designation 1985 GOST 0
2616 16264.5 Step motors. General specifications 1985 GOST 0
2617 344 Abrasive paper for control of abrasion resistance 1985 GOST 0
2618 7152 Button microphones and inset receivers for commercial telephone equipment. General specifications 1985 GOST 0
2619 22845 "Electric passenger and goids lifts. Arrangements for assembly, assembly and acceptance" 1985 GOST 0
2620 9960 Switch point rails. Specifications 1985 GOST 0
2621 17564 Diamond needles. Specifications 1985 GOST 0
2622 14117 Tape from precision alloys for elastic elements. Specifications 1985 GOST 0
2623 12965 GENERAL PURPOSE OIL-IMMERSED POWER TRANSFORMERS RATED FOR VOLTAGES 110 and 150 kV 1985 GOST 0
SPECIFICATIONS
2624 26446 Brazed and soldered joints. Methods of fatigue testing 1985 GOST 0
2625 18142.1 SEMICONDUCTOR RECTIFIERS WITH POWER EXCEEDING 5 kW GENERAL SPECIFICATIONS - Incorporates 1985 GOST 0
Amendment 1
2626 23074 Equipment for distributing organi fertilizer. Types and basic parameters 1985 GOST 0
2627 25.505 CALCULATIONS AND TESTS FOR DURABILITY METHODS OF MECHANICAL TESTING OF METALS TEST 1985 GOST 0
METHOD FOR LOW-CYCLE FATIGUE UNDER THERMOMECHANICAL LOADING
2628 10782 "Glass bottles for blood,transfusion and infusion compounds. Specifications" 1985 GOST 0
2629 21046 Waste petroleum products. General specifications 1985 GOST 0
2630 7394 GRAVEL AND GRAVEL-SAND BALLAST FOR RAILWAY TRACK SPECIFICATIONS - Incorporating Amendment 1985 GOST 0
1: 05/2000
2631 2 Ammonium nitrate. Specifications - Includes Amendment 1: 1987, Amendment 2: 1988, and Amendment 3: 1990 1985 GOST 0
2632 26467 Hard-surfacing flux-cored strip. General specifications 1985 GOST 0
2633 26598 Containers and means of packaging in building. General specification 1985 GOST 0
2634 14209 OIL-IMMERSED GENERAL-PURPOSE POWER TRANSFORMERS. Allowable Loads - Incorporating Amendment 1: 1985 GOST 0
02/15/1988
2635 14118 Wire from precision alloys for elastic elements. Specifications 1985 GOST 0
2636 5437 Reed wire. Specifications 1985 GOST 0
2637 12.1.041 OCCUPATIONAL SAFETY STANDARDS SYSTEM FIRE AND EXPLOSION SAFETY OF COMBUSTIBLE DUSTS 1985 GOST 0
GENERAL REQUIREMENTS - Includes Amendment 1: 1989 and Amendment 2: 1991
2638 17.5.3.06 Nature protection. Lands. Requirements for determination of the fertile soil layer standard disposal while performing earth- 1985 GOST 0
moving
2639 589 Detachable pulling chains 1985 GOST 0
2640 14119 Bars from precision alloys for elastic elements. Specifications 1985 GOST 0
2641 26469 Palladium and tungsten alloy wire. Specifications 1985 GOST 0
2642 25792 "Receivers for maritime mobile service. Basic parameters, technical requirements and measurement methods" 1985 GOST 0
2643 12.2.110 Occupational safety standards systems. General-purpose stationary air piston compressors. Norms and methods for 1985 GOST 0
determination of noise characteristics
2644 14801 Flat-head rivets (high precision). Construction and dimensions 1985 GOST 0
2645 19041 "Transportation packages and multi-packages of sawn timber. Packaging, marking, transportation and storage" 1985 GOST 0
2646 24.104 Unified system of standards for automated control systems AUTOMATED CONTROL SYSTEMS General requirements - 1985 GOST 0
Incorporating Corrigendum: 2003
2647 26606 "Fibre-covered, plastic-covered, film-covered and enamelled fiber covered magned wire. General specifications" 1985 GOST 0
2648 10382 Preserved milk products. Dry sour milk products. Specifications 1985 GOST 0
2649 1412 Flake graphite iron for casting. Grades 1985 GOST 0
2650 12.2.111 Occupational safety standards system. Mounted and trailing agricultural machines. General safety requirements 1985 GOST 0
2651 26645 METAL AND ALLOY CASTINGS DIMENSIONS AND MASS TOLERANCES AND MACHINING ALLOWANCES - 1985 GOST 0
Amd 1: 3/1989
2652 9144 FUEL FOR ENGINES CHECK METHOD FOR THERMAL STABILITY UNDER STATIC CONDITIONS - 1985 GOST 0
Incorporates Amendment 1: 04/1984
2653 8136 Active alumina. Specifications 1985 GOST 0
2654 26493 "Vibration. Pulp and paper production processing equipment, vibration standards. Technical requirements" 1985 GOST 0
2655 17.5.1.02 Nature protection LANDS Classification of disturbed lands to be reclamated 1985 GOST 0
2656 9074 Joined by pins slot cloths. Specifications 1985 GOST 0
2657 17.2.6.02 NATURE PROTECTION ATMOSPHERE AUTOMATIC GAS ANALYZERS FOR ATMOSPHERIC POLLUTION 1985 GOST 0
MONITORING - Incorporates Amendment 1: 04/1987
2658 4.395 "Product-quality index system. Data-transmission system, signal conversion equipment. Index nomenclature" 1985 GOST 0
2659 26615 Enamelled winding wires. Specifications 1985 GOST 0
2660 11209 Cotton and blended fabrics for protective clothing. Specifications 1985 GOST 0
2661 23739 "Autooperators of lines for chemical, electrochemical treatment of surface and produsing of coatings. Basic parameters and 1985 GOST 0
dimensions"
2662 7153 Subscriber telephone sets. General specifications 1985 GOST 0
2663 17479.0 Petroleum oils. Classification and designation. General requirements 1985 GOST 0
2664 17008 Khladon hermetic compressors. General specifications 1985 GOST 0
2665 14803 Rivets (high precision). General specifications 1985 GOST 0
2666 1936 Tea. Acceptance rules and methods of sampling 1985 GOST 0
2667 23738 "Baths of autooperating lines for chemical, electrochemical treatment of surfase and producing of coatings. Basic parametrs 1985 GOST 0
and dimensions"
2668 16214 Polyvinylchloride electroinsulating tape with adhesive laver. Specifications 1985 GOST 0
2669 22520 "Pressure, vacuum and pressure different transmitters with electrical analog output signals. SSI. General specifications" 1985 GOST 0
2670 22687.1 CONICAL SPUN FERROCONCRETE POSTS FOR TOWERS OF HIGH-VOLTAGE TRANSMISSION LINES Design 1985 GOST 0
and Dimensions
2671 26474 Diamond and extra-hard composite material drill bits and core bits. Types and main dimensions 1985 GOST 0
2672 26613 Lathe tools with mechanically clamped indexable inserts. Specifications 1985 GOST 0
2673 23377 Power generating sets and mobile electric power station with internal combustion engines. General technical requirements 1984 GOST 0
2674 26327 Grinding materials from silicon carbide. Specifications 1984 GOST 0
2675 8340 Pendulum centrifuges. General technical requirements 1984 GOST 0
2676 16711 Paraffined paper base. Specifications 1984 GOST 0
2677 9996 Binding material on paper base. General specifications 1984 GOST 0
2678 13033 SSI. Electrical analogue instruments and devices of automatization. General specification 1984 GOST 0
2679 15940 Tire building machines. General technical requirements 1984 GOST 0
2680 6113 Screw horizontal presses for clayware. Specifications 1984 GOST 0
2681 23110 Electrical household water-heaters. General specifications 1984 GOST 0
2682 15595 Foundry equipment. Die casting machines. General specifications 1984 GOST 0
2683 1923 Sterilized condensed canned milk. Specifications - Incorporating Amendment 1: 12/1983 1984 GOST 0
2684 21622 Household contact electric wafer irons and electric grills. General specifications 1984 GOST 0
2685 13037 Veterinary vaseline. Specifications 1984 GOST 0
2686 26372 Hexylur - 80% wettable powder. Specifications 1984 GOST 0
2687 26329 Computers and data processing systems. Tolerable noise levels of technical facilities and methods of their determination 1984 GOST 0
2688 26202 Vessels and apparatus. Norms and methods of strength analysis of shells and heads from influence of support loads 1984 GOST 0
2689 26114 Non-destructive testing. Flow detection equipment on the basic of particle accelerators. Main parameters and general 1984 GOST 0
technical requirements
2690 21802 CHLOROPHYLL-CAROTIN CONIFEROUS PASTE Specifications - Incorporating Amendment 1: 1988 1984 GOST 0
2691 26103 Electrical insulating materials on mica paper base. General specifications 1984 GOST 0
2692 26167 Machine-made foot-wear. Specifications 1984 GOST 0
2693 2077 Rye bread and rye-and-wheat bread. Specifications 1984 GOST 0
2694 31.121.42 Elements and assemblies of universal built-up and readjustable equipment for metal-cutting machines. Technical 1984 GOST 0
requirements
2695 9570 Box and pestpallets. General specifications 1984 GOST 0
2696 8339 Oil pressure units for hydraulic turbines. Specifications 1984 GOST 0
2697 20061 COMBUSTIBLE NATURAL GASES METHOD OF HYDROCARBON DEW POINT DETERMINATION - CMEA 1984 GOST 0
Standard 4491-84
2698 23708 Complect floor equipment for brooding and housing poultry. Technical requirements 1984 GOST 0
2699 9210 DYED DRESSED FUR SKINS AND FUR-COAT SHEEPSKINS METHOD FOR DETERMINATION OF COLOR 1984 GOST 0
FASTNESS TO RUBBING - Incorporates Amendment 1: 05/1983
2700 4771 Canned milk. Fat-extracted condensed milk with sugar. Specifications - Incorporating Amendment 1: 8/1983 1984 GOST 0
2701 7402 Electric fans for domestic use. General specifications 1984 GOST 0
2702 26319 Dangerous cargoes Packaging 1984 GOST 0
2703 26101 Welding powder wire. Specifications 1984 GOST 0
2704 26166 Machine-made foot-wear of artificial and synthetic leather. Specifications 1984 GOST 0
2705 7657 Charcoal. Specifications 1984 GOST 0
2706 25859 STEEL VESSELS AND APPARATUS Norms and Methods of Fatigue Strength Calculation under Low-cycle Loads - 1984 GOST 0
Incorporating Amendment 1: 04/17/1990
2707 12.2.062 Occupational safety standards system. Industrial equipment. Safety protectors - Incorporating Amendment 1: 8/1983 1984 GOST 0
2708 12.2.007.6 Occupational Safety Standards System LOW-VOLTAGE SWITCHING DEVICES Safety requirements - Incorporating 1984 GOST 0
Amendment 1: 6/1978; Amendment 2: 5/1983; Amendment 3: 4/1985 and Amendment 4: 6/1987
2709 20746 Vice for precision machine works. Specifications 1984 GOST 0
2710 31.121.41 Elements and assemblies of universal built-up and readjustable equipment for metal-cutting machines. Constructive 1984 GOST 0
elements. Basic parameters. Precision norms
2711 26139 INTERFACE FOR AUTOMATED SYSTEMS OF MULTISITE OBJECT CONTROL General requirements - 1984 GOST 0
Incorporating Amendment 1: 1989
2712 26214 Products of wood and wooden materials. Permissible errors in measuring linear dimensions 1984 GOST 0
2713 2601 Welding of metals. Terms and definitions of basic concepts 1984 GOST 0
2714 26089 "Rubber hoses for hydraulic brakes of automobiles. Basic parameters and dimensions, requirements, test, methods, 1984 GOST 0
marking, packing, trasportation and storage"
2715 26304 Pipe-line industrial valves supplied for export. General specifications 1984 GOST 0
2716 12.1.006 Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and 1984 GOST 0
requirements for control
2717 1335 RUBBER BRAKE HOSES WITHOUT FITTINGS WITH THREAD REINFORCEMENT FOR RAILWAY AND 1984 GOST 0
SUBWAY VEHICLES Specifications - Incorporating Amendment 1: 3/1989; Amendment 2: 11/2006
2718 12997 State system of industrial devices and means of automatization. General technical requirements 1984 GOST 0
2719 11701 Metals. Methods of tensile testing of thin sheets and strips - Amendment 1: 10/20/1987 1984 GOST 0
2720 12.4.023 Occupational safety standards system. Protective face shields. General technical requirements and methods of testing 1984 GOST 0
2721 12.2.007.0 Occupational safety standards system. Electrical equipment. Genegal safety requirements - Incorporating Amendment 1: 1984 GOST 0
6/1978, Amendment 2: 6/1981, Amendment 3: 9/1983, Amendment 4: 1988, Corrigendum: 1988
2722 26291 RELIABILITY OF NUCLEAR PLANTS AND THEIR EQUIPMENT GENERAL PROVISIONS AND PRODUCT 1984 GOST 0
INDICATORS - CMEA Standard 4334-83; Amendment 1: 12/26/1986; Amendment 2: 05/30/1990
2723 26057 Balanced manipulators. General specifications 1984 GOST 0
2724 22246 Auxiliary and emergency marine diesel generator sets. Types and basic parameters. General technical requirements 1984 GOST 0
2725 609 Synchronous condensers. General specifications 1984 GOST 0
2726 5180 SOILS LABORATORY METHODS FOR DETERMINATION OF PHYSICAL CHARACTERISTICS 1984 GOST 0
2727 12.2.104 Occupational safety standards system. Portable forestry equipment. General safety requirements 1984 GOST 0
2728 23482 Sulphite unbleached softwood pulp for export. Specification 1984 GOST 0
2729 10396 Crepe cable paper. Specifications 1984 GOST 0
2730 26381 Disposable flat pallets. General specifications 1984 GOST 0
2731 26126 Non-destructive testing brazed and soldered joints ultrasonic methods for inspection of quality 1984 GOST 0
2732 26220 Aerosol aluminium. Monoblock balloons. Specifications 1984 GOST 0
2733 19691 Nitroammophoska. Specifications 1984 GOST 0
2734 15607 Printing teletypes for 5-elements code. Basic parameters and general technical requirements 1984 GOST 0
2735 26279 POWER UNITS FOR ORGANIC THERAMAL STATIONS GENERAL REQUIREMENTS FOR SOUND 1984 GOST 0
SUPPRESSION - Incorporates Amendment 1: 06/21/1990
2736 5777 Technical potassium permanganate. Specifications 1984 GOST 0
2737 8002 Pistol Internal Combustion Engines AIR CLEANERS Methods of Motorless Bench Testing - Incorporating Amendment 1: 1984 GOST 0
11/1983; Amendment 2: 10/1987
2738 26129 DRESSED FUR SKINS AND FUR-COAT SHEEPSKINS METHODS FOR DETERMINATION OF THE CONTENTS 1984 GOST 0
OF UNBOUND GREASY SUBSTANCES - AMD 1: 12/7/1989
2739 697 "Canned meat.""Stewed pork"". Specifications" 1984 GOST 0
2740 23411 Electronic cash register machines. General specifications 1984 GOST 0
2741 23544 Ropes of wires for autotractor electrical equipment. General specifications 1984 GOST 0
2742 9078 "Flat pallets. Types, basic parameters and dimensions" 1984 GOST 0
2743 21769 Tree verdure. Specifications 1984 GOST 0
2744 18140 SSI differential pressure gauges . General specifications 1984 GOST 0
2745 8390 Electrohydraulic presses for cutting leather. General specifications 1984 GOST 0
2746 15962 PICTURE CATHODE-RAY TUBES GENERAL SPECIFICATIONS 1984 GOST 0
2747 12.1.014 Safety labour standards sytem. Air in the zone of operation. Method of measuring unhealthy matters concentration using 1984 GOST 0
indicator tubes
2748 6564 "Sawn timber and blanks. Rules of acceptance, control methods, marking and transportation" 1984 GOST 0
2749 26332 "Medical endoscopes. Marking, packing, transportation and storage" 1984 GOST 0
2750 26373 Technical lenacil. Specifications - Amendment 1: 09/27/1989 1984 GOST 0
2751 26215 Hand saws. Specifications 1984 GOST 0
2752 26116 Well-logging apparatus. General specifications 1984 GOST 0
2753 5284 "Canned meat. ""Stewed beef"". Specifications" 1984 GOST 0
2754 3582 Medical vaseline. Specifications 1984 GOST 0
2755 25874 RADIO-ELECTRONIC, ELECTRONIC AND ELECTROTECHNICAL EQUIPMENT CONVENTIONAL 1984 GOST 0
FUNCTIONAL DESIGNATIONS - Incorporating Amendment 1: 10/1984
2756 16769 Hydraulic accumulators. General technical requirements 1984 GOST 0
2757 26346 Lighting busways up to 660 V a.c. General technical conditions 1984 GOST 0
2758 26141 X-ray image intensifiers for medical apparatus. General technical requirements. Methods of test 1984 GOST 0
2759 4.211 PRODUCT-QUALITY INDEX SYSTEM. CONSTRUCTION ROCK BUILDING MATERIALS AND POROUS 1984 GOST 0
AGGREGATES FOR CONCRETE. NOMENCLATURE OF INDICATORS
2760 23213 Speedometers for locomotives. General specification 1984 GOST 0
2761 19113 Pine rosin. Specifications 1984 GOST 0
2762 9500 Standard dynamometers portable. General specifications 1984 GOST 0
2763 9651 Metals. Methods of tension tests at elevated temperatures 1984 GOST 0
2764 12.4.142 System of standards in industrial safety. Fabrics for protective clothing. Classification of dust permeability norms 1984 GOST 0
2765 17.5.3.05 Nature protection LAND RECLAMATION General requirements for earthling 1984 GOST 0
2766 26405 Tools for manufacturing bolts and nuts on cold heading machines. General specifications 1984 GOST 0
2767 26339 Diamond annular drills. Specifications 1984 GOST 0
2768 12.4.137 "Safety leather shoes for protection from petroleum, oil acid, alkaline, non-toxic and explosive dust. Specifications" 1984 GOST 0
2769 26221 Anti-scatter linear grids of medical X-ray apparatus. General specifications 1984 GOST 0
2770 26140 X-ray medical apparatus. General specifications 1984 GOST 0
2771 26303 High-pressure Vessels and Apparatus STUDS Methods of Strength Calculation 1984 GOST 0
2772 9808 Pigment titanium dioxide. Specifications 1984 GOST 0
2773 15850 Mine parachutes for cages. Specifications 1984 GOST 0
2774 7163 PETROLEUM PRODUCTS METHOD FOR DETERMINATION OF VISCOSITY BY AUTOMATIC CAPILLARY 1984 GOST 0
VISCOSIMETER
2775 14896 Rubber U-packing seals for hydraulic devices. Specifications 1984 GOST 0
2776 26145 X-ray medical cassetes. General specifications 1984 GOST 0
2777 18517 Garage compressors. General specifications 1984 GOST 0
2778 22729 Analyzers of content and properties of liquids SSI. General specifications 1984 GOST 0
2779 7144 Canned fish. Smoked fish in oil. Specifications - Incorporating Amendment 1: 7/1979, Amendment 2: 4/1980, Amendment 1984 GOST 0
3: 5/1984, Amendment 4: 12/1982, Amendment 5: 12/1985, Corrigendum: 1986, Corrigendum: 1990
2780 16504 State system of testing products. Product test and quality inspection. General terms and difinitions - Amendment 1:2/7/2003 1984 GOST 0
2781 15851 Suspension gears for mine cages. Specifications 1984 GOST 0
2782 2015 Fixed plain gauges. Technical requirements 1984 GOST 0
2783 23461 Diamond needle files. Specifications 1984 GOST 0
2784 26201 FERROTITANIUM, FERROMOLYBDENUM AND FERROVANADIUM SAMPLING AND SANPLE PREPARATION 1984 GOST 0
METHODS FOR CHEMICAL AND PHYSICAL-CHEMICAL ANALYSES
2785 2216 Adjustable plain snap gauges. Specifications 1984 GOST 0
2786 19116 Fancy shoes. Specifications 1984 GOST 0
2787 22314 Domestic fan. General specifications 1984 GOST 0
2788 1482 SQUARE-HEAD DOG-POINT SET SCREWS. PRODUCT GRADES A AND B Design and dimensions - Incorporating 1984 GOST 0
Amendment 1: July 1987
2789 13797 Vitamin meal of tree verdure. Specifications 1984 GOST 0
2790 22061 MACHINES AND TECHNOLOGICAL EQUIPMENT. SYSTEM OF BALANCE ACCURACY CLASSES BASIC 1984 GOST 0
PROVISIONS - AMD 1: 01/1983
2791 12.4.064 Safety labour standards system. Insulating suits. General technical requirements 1984 GOST 0
2792 8.009 State system for ensuring the uniformity of measurements. Standardized metrological characteristic of measuring 1984 GOST 0
instruments
2793 160 Spindles for spinning and twisting frames. General specifications 1984 GOST 0
2794 15860 "Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1,6 MPa. Specifications" 1984 GOST 0
2795 26358 Cast iron castings. General specifications 1984 GOST 0
2796 26153 One-column dividing stands. Technical requirements 1984 GOST 0
2797 26250 Drill pipes for borehole tools with removable core lifts. Specifications 1984 GOST 0
2798 9.407 Unified System of Corrosion and Ageing Protection Paint and Varnish Coatings Method of Appearance Evaluation - 1984 GOST 0
Incorporates Amendments 1: 10/1987; 2: 5/1992
2799 10100 BLACK COALS AND ANTHRACITE TEST METHOD FOR WASHABILITY 1984 GOST 0
2800 21552 "Computers technique. General technical requirements, acceptance, methods of testing, marking, packing, transportation 1984 GOST 0
and storage"
2801 26154 Photographic enlargers. General specifications 1984 GOST 0
2802 5982 Sulphite viscose pulp. Specifications 1984 GOST 0
2803 26360 Spotlights for vessels. General specifications 1984 GOST 0
2804 26055 Manipulators for building. General technical requirements 1984 GOST 0
2805 13356 Wooden boxes for goods of fishing industry. Specifications 1984 GOST 0
2806 12.2.028 Occupational safety standards system. Ventilators for general purposes. Methods for determination of noise characteristics 1984 GOST 0
2807 2903 Unskimmed condensed milk with sugar. Specifications - Incorporating Amendment 1: 1/1984, Amendment 2: 12/1987, 1984 GOST 0
Amendment 3: 6/1988, Corrigendum: 1988
2808 26366 Brass-plated steel wire for bead rings of tyres. Specifications 1984 GOST 0
2809 26287 Household electric pumps. General specifications 1984 GOST 0
2810 26056 Industry robots for arc welding. General specifications 1984 GOST 0
2811 26155 Corrosion-resistant steel drums. Specifications 1984 GOST 0
2812 202 Zink white. Specifications 1984 GOST 0
2813 16595 Diamond hand laps. Specifications 1984 GOST 0
2814 12535 Rubber Compounds Method of Curing Characteristics Determination by Curemeter 1984 GOST 0
2815 11004 Main mine fans. Specifications 1984 GOST 0
2816 14933 Air-suction units for domestic vacuum cleaners. General specifications 1983 GOST 0
2817 19625 Telegraph tape and paper for telegraph tape. Specifications 1983 GOST 0
2818 25594 Diamond honing sticks. Specifications 1983 GOST 0
2819 25757 Dry inertial collector. Types and basic parameters 1983 GOST 0
2820 26004 Diamond cut-off wheels with interior cuts. Specifications 1983 GOST 0
2821 27.204 Industrial product dependability TECHNOLOGICAL SYSTEMS Technical requirements for methods of reliability 1983 GOST 0
evaluation basing on productivity parameters
2822 15815 Technological chips. Specifications 1983 GOST 0
2823 8059 Universal joints with sliding liners for rolling-mill equipment. General requirements 1983 GOST 0
2824 26002 Coniferous sawn timber of northern grading supplied for export. Specifications 1983 GOST 0
2825 25870 Macroclimatic regions of the world with cold andtemperate climate. Regionalizing and statistical parameters of climatic 1983 GOST 0
factors for technical purposes
2826 25593 Diamond pastes. Technical conditions 1983 GOST 0
2827 4860.1 Glands for electric cables and wires. Specifications 1983 GOST 0
2828 25749 Metal cars for glass package with neck crown - type 3. Specifications 1983 GOST 0
2829 12586.1 Reinforced concrete vibrohydropressed pressure pipes. Design and dimensions 1983 GOST 0
2830 18521 Shot shooting apparatuses. Main parameters and dimensions. Technical requirements 1983 GOST 0
2831 19537 Gun grease. Specifications - Amendment 1: 06/1989; Amendment 2: 10/1990 1983 GOST 0
2832 18174 Automated remote control systems of marine propulsion diesel engines. General technical requirements 1983 GOST 0
2833 8291 Dead-weight preassure-gauge testers. General technical requirements 1983 GOST 0
2834 20719 Hydraulic motors. Acceptance and methods of tests 1983 GOST 0
2835 25747 Bag and pocket filtres. Type and basic parameters 1983 GOST 0
2836 10169 THREE-PHASE SYNCHRONOUS MACHINES TEST METHODS - Incorporates Amendment 1: 03/1980; Amendment 1983 GOST 0
2: 11/1982; Amendment 3: 12/1983; Amendment 4: 10/1987
2837 12.2.088 Occupational safety standards system. Ground equipment for well repair and realization. Safety general requirements 1983 GOST 0
2838 686 Army dried crusts. Specifications 1983 GOST 0
2839 21324 Air check valves for pn= 10 bar 1983 GOST 0
2840 14167 Turbine meters for cold water. Specifications 1983 GOST 0
2841 25847 Radiographic and fluorographic films. Sizes and controle methods 1983 GOST 0
2842 25736 "Rubber hoses for automobile pneumatic brakes. Principal parameters and dimensions, technical requrements, testing 1983 GOST 0
methods, marking, packing, transportation and storage, operating rules"
2843 26025 AGRICULTURAL AND FORESTRY MACHINERY AND TRACTORS Design factors measurement techniques 1983 GOST 0
2844 25995 Electrodes for measurement of bioelectric potentials. General technical requirements and test methods 1983 GOST 0
2845 23436 Cable paper for insulation of power cables for voltage up to 35 kV inclusively. Specifications 1983 GOST 0
2846 12.2.086 "Occupational safety standards system. Positive-displacement hydraulic drives and lubricating systems. General safety 1983 GOST 0
requirements for mounting, testing and maintenance"
2847 16097 Chemical charges for fire extinguishers. Specifications 1983 GOST 0
2848 23581.1 IRON ORES, CONCENTRATES, AGGLOMERATES, AND PELLETS METHOD FOR DETERMATION OF 1983 GOST 0
HYGROSCOPIC WATER CONTENT - Incoporated Amendment 1: 03/1982 and Amendment 2: 01/01/1986
2849 23581.9 IRON ORES, CONCENTRATES AND AGGLOMERATES Methods of carbon content determination - :1967; 1983 GOST 0
Incorporating Amendment 1:01/01/1986
2850 9733.5 Textile Materials Test method of colour fastness to distilled water - Incorporates Amendment 1: 6/1987; Amendment 2: 1983 GOST 0
6/1991
2851 25981 Surgical needles. General specifications 1983 GOST 0
2852 25706 "Magnifiers. Types, basic parameters. General technical requirements" 1983 GOST 0
2853 4727 Bearing wire. Specifications 1983 GOST 0
2854 23581.3 IRON ORES, CONCENTRATES, AGGLOMERATES, AND PELLETS Method for determination of bivalent iron in 1983 GOST 0
terms of ferrous oxide - :1967;:1981; Incorporating Amendment 1: 03/1982 and Amendment 2: 01/01/1986
2855 14705 Domestic electric immersion boilers. General specifications 1983 GOST 0
2856 25982 Dental handpieces for electrodrilling machines. General specifications 1983 GOST 0
2857 26044 Vibration. Equipment for operational monitoring of power hydroturbine unit vibration state. General technical requirments 1983 GOST 0
2858 9733.6 Textile Materials Test methods of colour fastness to perspiration - Incorporates Amendment 1: 2/1988 1983 GOST 0
2859 25727 Hands rands letters numerical. Technical conditions 1983 GOST 0
2860 12.2.096 OCCUPATIONAL SAFETY STANDARDS SYSTEM STEAM BOILERS WITH WORKING PRESSURE UP TO 0.07 1983 GOST 0
MPa SAFETY REQUIREMENTS - Amendment 1: 01/14/1988
2861 6606 Hot-smoked small fish. Specifications 1983 GOST 0
2862 8467 Steel drill pipes for core drilling. Specifications 1983 GOST 0
2863 25676 "Rubber rotary drilling hoses. Principal parameters and dimensions, requirements, testing methods, marking, packing, 1983 GOST 0
transportation and storage"
2864 25940 Floor-mounted flexible vehicles. Marking and symbols 1983 GOST 0
2865 6659 Waterproof upholstery covering board. Specifications 1983 GOST 0
2866 12.4.132 Men‫_آ‬s smock-froks. Specifications 1983 GOST 0
2867 1779 Asbestos cords. Specifications 1983 GOST 0
2868 11381 Cotton handkerchiefs. General specification 1983 GOST 0
2869 10287 Direct current meters. General specifications 1983 GOST 0
2870 7897 Deciduous timber blanks. Specifications 1983 GOST 0
2871 17.5.3.04 Nature Protection Lands Reclamation General Requirements - Incorporating Amendment 1: 09/1986 1983 GOST 0
2872 3875 Steel card wire. Specifications 1983 GOST 0
2873 12.4.134 Men‫_آ‬s cloaks for protection from water. Specifications 1983 GOST 0
2874 7219 Domestic electric soldering irons. General specifications 1983 GOST 0
2875 25696 Gas infrared burners. General technical requirements and acceptance rules 1983 GOST 0
2876 5157 HOT-ROLLED STEEL SECTIONS FOR DIFFERENT PURPOSES Assortment - Incorporating Amendment 1: 7/1988 1983 GOST 0
2877 1060 Cold-deformed seamless steel tubes for shipbuilding. Specifications 1983 GOST 0
2878 9733.4 Textile Materials Test method of colour fastness to washings - Incorporates Amendment 1: 1/1988 1983 GOST 0
2879 26030 Frozen sperm of bulls. Specifications 1983 GOST 0
2880 25672 BELT-TYPE CONVEYORS Acceptance test - Includes Amendment 1: 05/1985 1983 GOST 0
2881 17.1.3.10 Nature protection HYDROSPHERE General requirements for surface and ground water protection against oil and oil 1983 GOST 0
products pollution during pipeline transportation - (CMEA Standard 3545-82)
2882 11539 Bakelite resins plywood. Specifications 1983 GOST 0
2883 26047 BUILDING STEEL STRUCTURES. CONVENTIONAL DESIGNATIONS (GRADES) 1983 GOST 0
2884 21427.2 COLD-ROLLED ISOTROPIC ELECTRICAL-SHEET STEEL Specifications - Incorporating Amendment 1: 12/1985; 1983 GOST 0
Amendment 2: 10/1986; Amendment 3: 03/1987; Amendment 4: 09/1988; Amendment 5: 12/1990; Includes Corrigendum:
2007
2885 25893 Measuring means for hydrogeological field rsearch. Types. Main parameters. General requirements 1983 GOST 0
2886 25770 Engine oil for high-speed diesels of transport machines. Specifications 1983 GOST 0
2887 25605 Hand operated squire wrenches and driveparts. General specifications 1983 GOST 0
2888 26007 "Design, calculation and strenght testing. Methods of mechanical testing of metals. Methods for stress relaxation testing" 1983 GOST 0
2889 9733.13 TEXTILES Test method for color stability to organic solvents - Incorporates Amendment 1: 09/1987 1983 GOST 0
2890 20060 Natural combustible gases. METHODS FOR DETERMINATION OF WATER VAPOR CONTENT AND MOISTURE 1983 GOST 0
DEW POINT - Amendment 1: 07/01/1989; CMEA Standard 3764-82
2891 16357 "Non-linear resistor type arresters for rated a.c. voltages from 3,8 to 600 kV. General technical specifications" 1983 GOST 0
2892 25953 SEMICONDUCTOR ELECTRIC ENERGY CONVERTERS OF POWER 5 kV‫·آ‬A AND HIGHER PARAMETERS 1983 GOST 0
2893 23581.10 IRON ORES, CONCENTRATES AND AGGLOMERATES Methods of potassium and sodium oxide content 1983 GOST 0
determination - Incoporated Amendment 1: 05/01/87
2894 1875 Garment and head-dress leather. Specificatios 1983 GOST 0
2895 4.225 SYSTEM OF PRODUCT QUALITY INDICES. CONSTRUCTION SEWER AND DRAIN CLAY PIPES. Range Of 1983 GOST 0
Indices
2896 21427.1 Cold-rolled electrotechnical anisotropic thin-sheet steel 1983 GOST 0
2897 27.202 Reliability in Engineering TECHNOLOGICAL SYSTEMS Methods of reliability evaluation using product quality 1983 GOST 0
parameters
2898 25896 Fresh table grape. Specifications 1983 GOST 0
2899 5237 Electric communication equipment. Supply voltages and methods of measurement 1983 GOST 0
2900 25790 Hexagon socket wrenches. Technical conditions 1983 GOST 0
2901 25615 Automatic gas analyzer for coal mine. General technical requirements 1983 GOST 0
2902 13130 Post press tool sets for cold plastic working. Technical requirements 1983 GOST 0
2903 12.4.124 MEANS OF PROTECTION AGAINST STATIC ELECTRICITY 1983 GOST 0
2904 23581.4 IRON ORES, CONCENTRATES, AGGLOMERATES AND PELLETS Method for determination of titanium dioxide 1983 GOST 0
content - :1967;:1981; Incorporating Amendment 1: 03/1982 and Amendment 2: 01/01/1988
2905 15880 Electric drills. General technical requirements 1983 GOST 0
2906 15127 Solid generating hobs for sprochets of transmission roller and bush chains. Specifications 1983 GOST 0
2907 23865 CAPACITANCE SEALED BUSHINGS FOR NOMINAL VOLTAGES OF 110 kV AND HIGHER Types and 1983 GOST 0
Dimensions - Incorporating Amendment 1: 4/1983; Amendment 2: 1986 and Amendment 3: 1987
2908 18834 Magnetic wire for writing of harmonic signals. Specifications 1983 GOST 0
2909 25640 "Air-foam rubber products for industrial, agricultural and transport engineering. Specifications" 1983 GOST 0
2910 26019 Projectors for 8-mm films. Parameters 1983 GOST 0
2911 23981 Cable terminals. General specifications - Incorporates Amendment 1: 1/1986; Amendment 2: 1988; Amendment 3: 1990 1983 GOST 0
2912 15062 TOILET BOWL SEATS SPECIFICATIONS - Incorporates Corrigendum: 06/1984, Corrigendum: 07/1987, Corrigendum 1983 GOST 0
11/1988
2913 14201 Tall oil resin. Specifications 1983 GOST 0
2914 21101 Sulphate prehydrolized cold refind pulp for cord. Specifications 1983 GOST 0
2915 9.104 UNIFIED SYSTEM OF PROTECTION AGAINST CORROSION AND AGEING LACQUER COATINGS GROUPS OF 1983 GOST 0
OPERATION CONDITIONS - Incorporates Amendment 1:03/1983; Supersedes GOST 9.009-73
2916 19821 Still camera shutters. Basic parameters. Technical requirements. Test methods 1983 GOST 0
2917 26021 Electrical fuel level indicators for motor vehicles. Technical requirements and test methods 1983 GOST 0
2918 25650 Climate of Antarctica. Regionalizing and statistical parameters of climatic factors for technical purposes 1983 GOST 0
2919 9733.7 TEXTILES Test method for color stability to ironing - Incorporates Amendment 1: 12/1987 1983 GOST 0
2920 26029 Fresh non-deluted sperm of rams. Technical requirements and test methods 1983 GOST 0
2921 25823 Manganese dioxide for chemical sources of current. Specifications 1983 GOST 0
2922 22649 Medical air sterilizers. General technical conditions 1983 GOST 0
2923 22813 Pipeline Assembly Units and Parts REDUCING FLANGES DESIGNED for Pn over 10 to 100 ‫_أ‬P‫( أ‬over 100 to 1000 1983 GOST 0
kgf/cm2) Design and Dimensions - Amendment 1: 12/1988
2924 25950 FUEL WITH ANTISTATIC ADDITIVE FOR JET ENGINES METHOD FOR DETERMINATION OF SPECIFIC 1983 GOST 0
ELECTRIC CONDUCTIVITY - AMD 1: 3/13/1989
2925 10280 Vacuum electric cleaners for household. General specifications 1983 GOST 0
2926 20532 TELEVISION TRANSMITTERS FOR I to V BANDS KEY PARAMETERS, TECHNICAL REQUIREMENTS AND 1983 GOST 0
MEASUREMENT METHODS - (CMEA Standard 3704-82); Incoporated Amendment 1: 07/01/1989
2927 12.4.121 Occupational safety standards system. Filtering protective masks. Specifications 1983 GOST 0
2928 2407 Charcoal carburizator. Specifications 1983 GOST 0
2929 14662 "Telegraph radio communication channel transmit-receive equipment. Main parameters, general technical requirements and 1983 GOST 0
methods of measurement of transmit-receive channel"
2930 10037 Autoclaves for building industry. Types and basic technical data 1983 GOST 0
2931 3836 Electrotechnical unalloyed steel thin sheet and bands. Specifications 1983 GOST 0
2932 1759.3 Nuts. Surface defects and methods of control 1983 GOST 0
2933 25651 Testing and measuring instruments for vehicles. General technical requirements. Test methods 1983 GOST 0
2934 4.224 Quality ratings system. Building. Sealants and caulking materials and products. Nomenclature of characteristics 1983 GOST 0
2935 23581.2 IRON ORES, CONCENTRATES AND AGGLOMERATES Methods for determination of manganese oxide content - 1983 GOST 0
:1967; Incorporating Amendment 1: 01/01/1986 and Amendment 2: 07/01/1990
2936 21621 "Electric grills, shashlick grills, toasters, roasters for domestic use. General specifications" 1983 GOST 0
2937 23581.13 IRON ORES, CONCENTRATES AGGLOMERATES AND PELLETS Method for Determination of Mass Loss during 1983 GOST 0
Incineration - (CMEA Standard 3521 In place of GOST 12762-67); Incoporated Amendment 1: 04/1983 and Amendment
2: 01/19/1986
2938 18199 Domestic electric juice extractors. General specifications 1983 GOST 0
2939 8595 Lithium hydroxide technical. Specifications 1983 GOST 0
2940 25867 Vessels and Apparatus JACKETED VESSELS Norm and Methods of Strength Designing 1983 GOST 0
2941 2695 Sawn timber of broadleaved species. Specifications 1983 GOST 0
2942 20426 Non-destructive testing. Methods of defectoscopy radiation. Field of application 1982 GOST 0
2943 12.4.112 Occupational safety standards system. Women‫_آ‬s overalls for oil and oil products. Specifications 1982 GOST 0
2944 18123 Washers. General specification 1982 GOST 0
2945 8986 Yellow phosphorus for technical use. Specifications 1982 GOST 0
2946 25476 Hudraulic fluid power and lubricating systems. Filters. Acceptance and methods of tests 1982 GOST 0
2947 25292 Rendered Edible Animal Fats. Specifications 1982 GOST 0
2948 11208 Sulphate unbleached wood (coniferous) pulp. Specifications 1982 GOST 0
2949 22782.5 EXPLOSION-PROOF ELECTRICAL EQUIPMENT WITH â__SPARKPROOF ELECTRICAL CIRCUITâ__ 1982 GOST 0
PROTECTION TECHNICAL REQUIREMENTS AND TEST METHODS - CMEA Standard 3143-81; Incorprates
Amendment 1: 04/1982, Includes Amendment 2: 1984
2950 8045 Luminaires for public lighting. General specifications 1982 GOST 0
2951 15597 Liminaires for industrial buildings. General specifications 1982 GOST 0
2952 17024 End mills. Specifications 1982 GOST 0
2953 25215 HIGH-PRESSURE VESSELS AND APPARATUS FERRULES AND BOTTOMS NORMS AND METHODS OF 1982 GOST 0
STRENGTH CALCULATION - CMEA Standard 3027-81; Amendment 1: 04/17/1990
2954 2447 Grinding heads. Technical conditions 1982 GOST 0
2955 7110 Handlamps. General specifications 1982 GOST 0
2956 16181 Diamond grinding wheels. Specifications 1982 GOST 0
2957 1954 Electromotive operating measures. Standard cells. General specifications 1982 GOST 0
2958 13479 Board and combined cans. General specifications - Incorporating Amendment 1: 6/1988 1982 GOST 0
2959 25468 Equipment for lifting and lowering operations and pivots. Connecting dimensions 1982 GOST 0
2960 25251 GAUNTRY ELECTRIC CRANES Test Methods 1982 GOST 0
2961 10498 Especially thin-walled seamless tubes from corrosion-resistant steel. Specifications 1982 GOST 0
2962 17472 "Canned foods. Cabbage or perer, cluffed with meat and rice" 1982 GOST 0
2963 25277 Hydraulic power drives and lubricating systems. Filter elements. Acceptance and testing methods 1982 GOST 0
2964 17.1.3.06 PROTECTION OF NATURE. HYDROSPHERE. GENERAL REQUIREMENTS FOR GROUNDWATER 1982 GOST 0
CONSERVATION
2965 22373 Butterfly valves and spherical valves for hydraulic turbines. Technical specifications 1982 GOST 0
2966 12.4.111 Occupational safety standards system. Men‫_آ‬s overalls for oil and oil product protection. Specifications 1982 GOST 0
2967 10264 Pilot lights. General specifications 1982 GOST 0
2968 7512 Nondestructive testing. Welded joints. Radiography method 1982 GOST 0
2969 5005 Steel electrowelded cold-deformed pipes for cardan shafts. Specifications 1982 GOST 0
2970 25275 Standards system on vibration. Devices for measuring the vibration of rotary machines. General technical requirements 1982 GOST 0
2971 1759.1 "Bolts, screws, studs and tuts. Tolerances. Control methods of dimensions and deviations of form and surface position" 1982 GOST 0
2972 25454 Blades of bar shears. Technical requirements 1982 GOST 0
2973 183 ROTATING ELECTRICAL MACHINES GENERAL SPECIFICATIONS - Incorporates Amendment 1: 01/1981 and 1982 GOST 0
Amendment 2: 02/1982
2974 7769 Alloy cast iron for castings of special properties. Grades 1982 GOST 0
2975 12450 A. c. circuit-breakers for voltages from 110 to 500 kV. Switching of overhead lines on no-load. Technical requirements and 1982 GOST 0
test methods
2976 12.4.110 System of labour safety standards. Miner‫_آ‬s overalls for protection against mechanical action and general industrial 1982 GOST 0
contaminations. Specifications
2977 25263 Calcium hypochlorite neutral. Specifications 1982 GOST 0
2978 11314 Technical coal xylenols. Specifications 1982 GOST 0
2979 25328 CEMENT FOR BUILDING MORTARS Specifications 1982 GOST 0
2980 8.478 State System for Guaranteeing the Uniformity of Measurements DIRECT CURRENT MEASURING 1982 GOST 0
POTENTIOMETERS Verification methods and instruments
2981 6501 Sulphite unbleached pulp of coniferous wood. Specifications 1982 GOST 0
2982 11355 Dressed Raccoon Skins Specifications 1982 GOST 0
2983 18444 Suction dredges for melioration. General technical conditions 1982 GOST 0
2984 20415 Non-destructive testing. Acoustic methods. General principles 1982 GOST 0
2985 12167 Shuttless looms with weft projectiles. General specifications 1982 GOST 0
2986 304 Direct current welding generators. Specifications 1982 GOST 0
2987 8074 "Toolmaker‫_آ‬s microscopes. Types, main parameters and dimensions. Technical requirements" 1982 GOST 0
2988 13449 SANITARY CERAMIC WARE TEST METHODS - CMEA Standard 2683-80 1982 GOST 0
2989 19795 Measuring projectors. General technical specifications 1982 GOST 0
2990 25443 Metal-cutting machines. Product specimens for control of working accuracy. General technical requirements 1982 GOST 0
2991 7237 Welding converters. General specifications 1982 GOST 0
2992 21963 Cutoff wheels. Technical conditions 1982 GOST 0
2993 2402 Welding sets with internal combustion engines. General specifications 1982 GOST 0
2994 5105 Steel tanks for fuel and oils. Specifications 1982 GOST 0
2995 25500 Laminated plastic sheets and plates for electrotechnical use. General specification 1982 GOST 0
2996 25127 TMTD technical. Specifications 1982 GOST 0
2997 18917 NATURAL COMBUSTIBLE GAS SAMPLING METHODS - CMEA Standard 2102-80 1982 GOST 0
2998 10054 Waterproof abrasive paper. Specifications 1982 GOST 0
2999 23518 GAS-SHIELDED ARC WELDING. WELDED JOINTS BASIC TYPES, DESIGN ELEMENTS AND DIMENSIONS 1982 GOST 0
3000 25260 ROCKS FIELD TEST METHOD BY PENETRATION LOGGING - Incorporating Amendment 1: 02/1988 1982 GOST 0
3001 10708 Pendulum impactors. Specifications 1982 GOST 0
3002 8723 Zinc vitriol. Specifications 1982 GOST 0
3003 10598 Air-water coolers for supercharged diesels and gas engines. General specifications 1982 GOST 0
3004 4677 Pocket lamps. General specifications 1982 GOST 0
3005 25106 Plain bearings split bearing blocks and pllgsw-blocks. Technical requiresents 1982 GOST 0
3006 25293 Coolers of air-cooling system of power semiconducting devices. General specifications 1982 GOST 0
3007 25449 WATER-MODERATED AND STEAMWATER HEAT EXCHANGERS TYPES, KEY PARAMETERS AND 1982 GOST 0
DIMENSIONS - Amendment 1: 07/1988
3008 25148 Stationary dental units. General technical requirements. Methods of testing 1982 GOST 0
3009 25306 Plane blades for plates shears. Basic and connecting dimensions. Technical requirements 1982 GOST 0
3010 7360 Drill-rod for substitutes. Specifications 1982 GOST 0
3011 25547 Equipment for storage of forage. General technical conditions 1982 GOST 0
3012 5812 Fastening for broad gauge railways. Specifications - Incorporating Amendment 1: 1987 and Amendment 2: 1996 1982 GOST 0
3013 8 Metal cutting machine tools. General requirements to accuracy tests 1982 GOST 0
3014 21643 "Suture appliances, medical. General technical requirements" 1982 GOST 0
3015 12936 Automobile speedometers mith electric drive. General technical specifications 1982 GOST 0
3016 12120 Metal and combined cans. Specifications 1982 GOST 0
3017 25137 NON-METALLIC BUILDING MATERIALS, SOLID BROKEN STONE AND SAND MADE FROM INDUSTRIAL 1982 GOST 0
WASTE, POROUS AGGREGATES FOR CONCRETE. CLASSIFICATION
3018 13713 Dressed skins of wolverine. Specifications 1982 GOST 0
3019 AD1 2903 WHOLE CONDENSED MILK WITH SUGAR Specifications - Incorporating Amendment 1: 01/84; Amendment 2: 08/86 1982 GOST 0
3020 25134 Brucellin VIEV. Specifications 1982 GOST 0
3021 8639 Square steel pipes. Range 1982 GOST 0
3022 22667 NATURAL COMBUSTIBLE GASES CALCULATION METHOD FOR DETERMINATION OF COMBUSTION 1982 GOST 0
HEAT, RELATIVE DENSITY AND WOBBE INDEX - CMEA Standard 3359-81; Amendment 1: 08/1992
3023 191 Block load chains. Specifications 1982 GOST 0
3024 5639 STEELS AND ALLOYS METHODS OF DETECTION AND DETERMINATION OF GRAIN SIZE 1982 GOST 0
3025 5781 Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications - Amendment 1:1984; Amendment 2:1987; 1982 GOST 0
Amendment 3:1987; Amendment 4:1989; Amendment 5:1990
3026 25312 Measuring thermal thermoelectric laser radiation transducers. Types and basic parameters. Measuring methods 1982 GOST 0
3027 25560 Breathing apparatus of tank for petroleum products. Specifications 1982 GOST 0
3028 25166 Machines for the pulp and paper industry. Safety requirements 1982 GOST 0
3029 12.3.028 Occupational safety standards system. Abrasive and elbor instruments. Safety requirements 1982 GOST 0
3030 13438 SPHERICAL WASHERS FOR MACHINE RETAINING DEVICES DESIGN - Incorporating Amendment 1: 6/1980; 1982 GOST 0
Amendment 2: 5/1989; Amendment 3: 12/1989
3031 17168 Filters electrical octave and third-octave. General technical requirements and methods of testing 1982 GOST 0
3032 9393 Fish and animals vetenary fat. Specifications 1982 GOST 0
3033 3618 STATIONARY STEAM TURBINES FOR TURBOGENERATOR DRIVE TYPES AND KEY PARAMETERS 1982 GOST 0
3034 21339 Tachometers. General specification 1982 GOST 0
3035 25178 Electric hand dryers. General specifications 1982 GOST 0
3036 25365 Steam and hot water boilers. General technical requirements - Incorporating Amendment 1: 1987 1982 GOST 0
3037 25573 Cargo handling rope slings for building. Specifications 1982 GOST 0
3038 22992 House hold apparatus used liquid fuel. General specifications 1982 GOST 0
3039 2456 Grinding stones 1982 GOST 0
3040 6456 Abrasive paper. Specifications 1982 GOST 0
3041 12.0.001 OCCUPATIONAL SAFETY STANDARDS SYSTEM BASIC PROVISIONS 1982 GOST 0
3042 17.1.3.05 Nature protection. Hydrosphere. General requirements for surface and underground water protection against oil and oild 1982 GOST 0
products pollution
3043 21671 PETROL ELECTRIC UNITS AND ELECTRIC POWER GENERATORS GENERAL SPECIFICATIONS 1982 GOST 0
3044 25548 BASIC NORMS OF INTERCHANGEABILITY CONES AND CONICAL JOINTS TERMS AND DEFINITIONS 1982 GOST 0
3045 10771 Filament electric lamps for light measuring. Specifications 1982 GOST 0
3046 4047 Rim saws for metal-cutting. Specifications 1982 GOST 0
3047 16110 POWER TRANSFORMERS TERMS AND DEFINITIONS - CMEA Standard 1103-78 1982 GOST 0
3048 12.1.038 Occupational safety standards system. Electric safety. Maximum permissible levels of pick-up voltages and currents 1982 GOST 0
3049 25182 Printing teletypes for 7-elements code. General technical requirements 1982 GOST 0
3050 14109 Mallein. Specifications 1982 GOST 0
3051 17536 Feeding flour of animal origin. Specifications 1982 GOST 0
3052 4429 Lemons. Specifications 1982 GOST 0
3053 10434 Electric contact connections. Classification. General specifications 1982 GOST 0
3054 5876 Type R18 and R24 narrow-gauge railway rails. Technical requirements 1982 GOST 0
3055 14753 Indicating and recording pneumatic control instruments SSI. General specifications 1982 GOST 0
3056 7268 STEEL METHOD FOR DETERMINATION OF PROPENSITY TO MECHANICAL AGEING BY IMPACT BEND 1982 GOST 0
TESTING - Amendment 1:1986
3057 14008 Temperature lamps as standard ones. Types and main parameters. General requirements 1982 GOST 0
3058 13822 Generating sets and moving diesel-power stations. General specifications 1982 GOST 0
3059 286 CLAY SEWER PIPES. SPECIFICATIONS 1982 GOST 0
3060 25223 Wood-working machines. General specifications 1982 GOST 0
3061 25570 HATCH COVERS OF TANKS FOR OIL PRODUCTS TYPES, KEY PARAMETERS AND DIMENSIONS 1982 GOST 0
3062 2491 Low-voltage electromagnetic starters. General specifications 1982 GOST 0
3063 19348 "Electrotechnical products for agricultural purposes. General technical requirements. Marking, packing, transportation and 1982 GOST 0
storage"
3064 11291 Carbide and HSS tipped woodwoving grooving cutters. Specifications 1981 GOST 0
3065 23469.0 Cable sleeves. General specifications 1981 GOST 0
3066 12.2.058 Occupational safety standards system. Hoisting cranes. Requirements for colour of crane components dangerous in 1981 GOST 0
exploitation
3067 17314 "Arrangements for fastening heat insulation of steel vessels and apparatus. Construction, dimensions and dimensions. 1981 GOST 0
Technical requirements"
3068 17.2.4.02 NATURE PROTECTION. ATMOSPHERE General Requirements for Methods of Pollutant Determination - CMEA 1981 GOST 0
Standard 2598-80
3069 7048 Binoculars. Types and basic parameters. General technical requirements 1981 GOST 0
3070 10654 GAGES FOR TRIANGULAR THREAD OF TUBING PIPES WITH COUPLINGS TYPES. BASIC DIMENSIONS AND 1981 GOST 0
TOLERANCES
3071 6211 BASIC NORMS OF INTERCHANGEABILITY PIPE TAPER THREAD - (CMEA STANDARD 1159-78) 1981 GOST 0
3072 22782.0 Explosionproof electrical apparatus. General requirements and methods of testing 1981 GOST 0
3073 18714 The earthing wires for the provision of the rocket and rocket-space technology items protection from the static electricity. 1981 GOST 0
Specifications
3074 8335 Visual disappearing filament micro-pyrometers. General specifications 1981 GOST 0
3075 24814 Radial roof ventilators. General specifications 1981 GOST 0
3076 24570 Safety valves of steam and hot-water boilers. Technical requirements 1981 GOST 0
3077 9274 Rolls for picking out of stones and for crushing of clay masses. Specifications 1981 GOST 0
3078 24658 Radioisotope therapeutical apparatuses for contact irradion. General technical requirements 1981 GOST 0
3079 12.2.055 Occupational safety standards system. Processing equipment for ferrous and non-ferrous scrap and waste metal. Safety 1981 GOST 0
requirements
3080 15863 Plate blanks of die sets for sheet stamping for dividing operations. Technical requirements 1981 GOST 0
3081 25046 Single use needles for injections. Basic dimensions. Technical requirements. Test methods 1981 GOST 0
3082 24906 Straight bevel gear cuftess technical conlitions 1981 GOST 0
3083 24701 PEAT METHODS FOR DENSITY DETERMINATION - Incorporating Amendment 1: 3/1987 1981 GOST 0
3084 8483 Fishing tap. Technical conditions 1981 GOST 0
3085 24656 CIRCULATION PUMPS FOR PRIMARY CIRCUITS OF POWER-GENERATING UNITS OF NUCLEAR POWER 1981 GOST 0
STATIONS WITH VVER REACTORS TYPES, KEY PARAMETERS AND GENERAL TECHNICAL
REQUIREMENTS
3086 9515 Metal Piston Rings for Piston Compressors Specification - Incorporates Amendment 1: 12/1985 1981 GOST 0
3087 13078 Sodium silicate solute. Specifications 1981 GOST 0
3088 24645 Protein paste Ocean frosen. Specification 1981 GOST 0
3089 24754 Mining electrical equipment normal production. General technical requirements and methods of testing 1981 GOST 0
3090 12.1.035 Occupational safety standards system. Equipment for arc and resistance electric welding. Admissible noise levels and 1981 GOST 0
methods of measurement
3091 8565 Fishing socket. Technical conditions 1981 GOST 0
3092 1523 Cylindrical reamers. Technical requirements 1981 GOST 0
3093 4364 Air drive lines for brake systems of vehicles. General technical requirements 1981 GOST 0
3094 25045 Electrical insulating materials with chips mica. General specifications 1981 GOST 0
3095 2585 D.c. circuit-breakers with rapid auto-reclosing. General technical requirements 1981 GOST 0
3096 18707 The jumpers for the provision or the rocket and rocket-space technology items protection from the static electricity. 1981 GOST 0
Specifications
3097 10199 Mixed feed (concentrates) for sheep. Specifications 1981 GOST 0
3098 19040 METAL PIPES Test method for tension at a high temperature - Incorporating Amendment 1: 10/1987 1981 GOST 0
3099 24753 Contact terminal of electrical equipment. General requirements 1981 GOST 0
3100 9829 Light-beam oscillographs. General technical requirements 1981 GOST 0
3101 23581.18 IRON ORES, CONCENTRATES, AGGLOMERATES AND PELLETS Method of total iron determination - Incoporated 1981 GOST 0
Amendment 1: 05/01/1987
3102 8478 WELDED WIRE MESHES FOR REINFORCED CONCRETE. Specifications 1981 GOST 0
3103 24687 POWER TRANSFORMERS AND ELECTRICAL REACTORS PROTECTION DEGREES - CMEA Standard 2269-80 1981 GOST 0
3104 19716 Automatic pneumatic rapier looms. General technical requirements 1981 GOST 0
3105 12405 Electrohydraulic governous for hydraulic turbines. Technical requirements 1981 GOST 0
3106 24641 Lead and aluminium sheaths for cables. Specifications 1981 GOST 0
3107 16556 Ground connections for movable electrotechnical installations. General specifications 1981 GOST 0
3108 25036 Electric household appliances. Kitchen electric machanical machines. General specifications 1981 GOST 0
3109 24896 Live fish. Specifications 1981 GOST 0
3110 12.2.007.5 POWER CAPACITORS. CAPACITOR INSTALLATIONS Safety requirements - Incorporating Amendment 1: 6/1980; 1981 GOST 0
Amendment 2: 9/1992
3111 12.2.016 Occupational safety standards system. Gas compressing equipment. General safety requirements 1981 GOST 0
3112 15608 Pneumatic piston cylinders. Specifications 1981 GOST 0
3113 9921 Tyre hand-operated manometers. General specifications 1981 GOST 0
3114 9634 Capsulebubble steel caps of column apparatus. Construction and dimensions 1981 GOST 0
3115 10655 GAGES FOR TRIANGULAR THREAD OF CASING PIPES WITH COUPLINGS Types. Basic dimensions and 1981 GOST 0
tolerances
3116 10083 Taper reamers . Technical requirements 1981 GOST 0
3117 19876 D.C. measuring digital bridges. General technical specifications 1981 GOST 0
3118 8433 Auxilliary substances OP -7 and OP -10. Specifications 1981 GOST 0
3119 11964 Technical cast iron and steel shot. Common technical requirements 1981 GOST 0
3120 25013 Electrochemical impulse paper. Specifications 1981 GOST 0
3121 20803 Metal boxes for wiring. General specifications 1981 GOST 0
3122 13320 Automatic instruments of contnuous action used for gas analysis. General requirements 1981 GOST 0
3123 24752 Trolley bus bars of voltage to 1000 V. General specifications 1981 GOST 0
3124 19423 Domestic electric coffeemills. Specifications 1981 GOST 0
3125 12.2.054 Occupational safety standards system. Acetilene installations. Safety requirements 1981 GOST 0
3126 1460 Calcium carbide. Specifications 1981 GOST 0
3127 11111 Dressed skins of kids. Specifications 1981 GOST 0
3128 23581.16 IRON ORES, CONCENTRATES, AGGLOMERATES AND PELLETS Methods for determination of calcium oxide and 1981 GOST 0
magnesium oxide - (CMEA Standard 1200-78 In place of GOST 12744-74); Incoporated Amendment 1: 05/01/1987
3129 24890 Welded pipes out of titanium and titanium alloys. Specifications 1981 GOST 0
3130 3675 BASIC INTERCHANGEABILITY NORMS CYLINDRICAL WORM GEARS TOLERANCES - CMEA Standard 311-76 1981 GOST 0
and CMEA Standard 1162-78
3131 24857 Axial roof ventilators. General specifications 1981 GOST 0
3132 8908 BASIC NORMS OF INTERCHANGEABILITY NORMAL ANGLES AND ANGLE TOLERANCES - CMEA Standard 1981 GOST 0
178-75 and CMEA Standard 513-77; Incorporates Corrigendum: 05/1985
3133 24925 TECHNICAL DIAGNOSTICS. TRACTORS DIAGNOSIS ADAPTABILITY General technical requirements - 1981 GOST 0
Incorporates Amendment 1: October 1987
3134 6128 Metallic tins for chemical products. Specifications 1981 GOST 0
3135 13045 General industrial rotameters. General specifications 1981 GOST 0
3136 24624 Hydraulic presses for glieing soles to foot wear. General specifications 1981 GOST 0
3137 16835 Kernels of giant filbert nuts. Specifications 1981 GOST 0
3138 7691 "Paperboard. Packing, marking, transportation and storage" 1981 GOST 0
3139 23581.15 IRON ORES, CONCENTRATES, AGGLOMERATES AND PELLETS METHODS OF SILICON DIOXIDE 1981 GOST 0
DETERMINATION - Incoporated Amendment 1: 05/01/87
3140 24634 Wooden boxes for export products. General specifications 1981 GOST 0
3141 18689 "Capacitors for electric-thermal installations with frequences 0,5-10,0 kHz. General specifications" 1981 GOST 0
3142 7348 Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications 1981 GOST 0
3143 17404 Glanders serum for use in the complement fixation test. Specifications 1981 GOST 0
3144 25007 Data transmission interface with communication channel transmission frequency separation system. Basic parameters at the 1981 GOST 0
interface
3145 24983 REINFORCED-CONCRETE PRESSURE PIPES. ULTRASONIC METHOD FOR TESTING AND EVALUATION OF 1981 GOST 0
CRACK RESISTANCE
3146 17594 Dry bay-leaves. Specifications 1981 GOST 0
3147 24790 INDUSTRIAL DIESEL LOCOMOTIVES GENERAL SPECIFICATIONS 1981 GOST 0
3148 12.2.060 Occupational safety standards system. Acetulene pipelines. Safety requirements 1981 GOST 0
3149 2.304 UNIFIED SYSTEM OF DESIGN DOCUMENTATION DRAWING TYPES - Incorporates Amendment 1: 03/1989 1981 GOST 0
3150 11013 Moving-coil oscillograph galvanometers. General specifications 1981 GOST 0
3151 588 Pulling block chains 1981 GOST 0
3152 1914 "Oscillator, amplifier, rectifier, control and modulator tubes with anode dissipated power more than 25 W. General 1981 GOST 0
specification"
3153 10331 Fine-module finishing start hobbing cutters for cylindrical involute gears. Specifications 1981 GOST 0
3154 24588 Blanks of modified wood. Marks and dimensions 1981 GOST 0
3155 24672 Ganges for taper thread. Specifications 1981 GOST 0
3156 12.2.061 Occupational safety standards system. Industrial equipment. General safety requirements to working places 1981 GOST 0
3157 19177 Rubber porous sealing gaskets. Specifications 1981 GOST 0
3158 18287 Colloid aluminium hydroxide. Specifications 1981 GOST 0
3159 25054 Forgings of corrosion-resisting steels and alloys. General specification 1981 GOST 0
3160 24950 Bent branches and elbows at line bends for transmission steel pipelines specifications 1981 GOST 0
3161 7400 Domestic electric tea-kettles and electric samovars. Specifications 1981 GOST 0
3162 10693 Condenser sealed bushings for nominal voltages from 110 and higher. General specifications 1981 GOST 0
3163 23581.20 IRON ORES, CONCENTRATES, AGGLOMERATES AND PELLETS Methods of sulfur determination - (CMEA 1981 GOST 0
Standard 1227-78); Incoporated Amendment 1: 05/01/1987
3164 24682 ELECTROTECHNICAL PRODUCTS GENERAL TECHNICAL REQUIREMENTS REGARDING RESISTANCE TO 1981 GOST 0
THE EFFECTS OF SPECIAL MEDIUMS - Amendment 1:01/11/1985; Corrigendum:1987
3165 24831 "Package equipment. Types, basic parameters and dimensions" 1981 GOST 0
3166 11709 Basic Norms of Interchangeability METRIC THREAD FOR PLASTIC PARTS 1981 GOST 0
3167 5556 Cotton wool medical hygroscopic. Specifications 1981 GOST 0
3168 24959 Gauges for splined joints. Technical requirements 1981 GOST 0
3169 10493 Rigin and compensating lens-shaped seals for pn20-100 mpa (200-1000 kgf/cm2). Technical specifications 1981 GOST 0
3170 5756 Carbide tipped twist drills. Specifications 1981 GOST 0
3171 19357 Copper-aluminium connectiong plates. General specifications 1981 GOST 0
3172 24688 Static semiconductor exciters for three-phase synchronous engines. General technical requirements 1981 GOST 0
3173 20247 Power furnace transformers and transformer units. General specifications 1981 GOST 0
3174 17342 Knives for capacity chippers. Technical conditions 1981 GOST 0
3175 25089 Printing paper for voluminous editions. Specifications 1981 GOST 0
3176 24982 "Rolled sheet of corrosion-resistant, heatresistant and heat-proof alloys. Specifications" 1981 GOST 0
3177 12.2.063 Occupational safety standards system. Industrial pipeline valves. General safety requirements 1981 GOST 0
3178 20888 Household electric coffee-pots. Specifications 1981 GOST 0
3179 24715 Brazed and soldered joints. Methods for inspection of quality 1981 GOST 0
3180 24847 GROUNDS DETERMINATION METHODS OF SEASONAL FREEZING DEPTH 1981 GOST 0
3181 24855 "Analogous transformers measuring current, voltage, capacity, friquency, resistance. General specifications" 1981 GOST 0
3182 23581.17 IRON ORES, CONCENTRATES, AGGLOMERATES AND PELLETS Methods of aluminum oxide determination - 1981 GOST 0
Incoporated Amendment 1: 05/01/1987
3183 2228 Paper for bags. Specifications 1981 GOST 0
3184 16834 Nuts of giant filbert. Specifications 1981 GOST 0
3185 22782.7 "Explosionproof electrical apparatus. Type of protection ""e"". Technical requirements and methods of testing" 1981 GOST 0
3186 803 Hot-rolled strips of carbon high-grade steel for plating. Specifications 1981 GOST 0
3187 9562 BASIC NORMS OF INTERCHANGEABILITY TRAPEZOIDAL SINGLE-START THREAD TOLERANCES - CMEA 1981 GOST 0
Standard 836-78; Incoprorates Corrigendum: 12/1988
3188 12.2.064 Occupational safety standards system. Controls of industrial equipments. General safety requirements 1981 GOST 0
3189 20783 Metal trays for wiring. General specifications 1981 GOST 0
3190 24848.2 Variator V-belts for industrial equipment. Specifications 1981 GOST 0
3191 9940 SEAMLESS HOT-DEFORMED TUBES MADE FROM CORROSION-RESISTANT STEEL SPECIFICATIONS - 1981 GOST 0
Amendment 1:1987; Amendment 2:1988; Amendment 3:1988; Amendment 4:2000
3192 25018 CABLES WIRES AND CORDS Methods for determination of mechanical characteristics of insulation and sheath - 1981 GOST 0
Incorporating Amendment 1: 1/1985 and Amendment 2: 5/1988
3193 18856 Inhalation anesthesia apparatus and lung ventilators. General technical requirements. Test methods 1981 GOST 0
3194 20259 Universal containers. General technical requirements 1980 GOST 0
3195 24298 Bakery products. Rolls. General specifications 1980 GOST 0
3196 20580.5 Lead. Method for the determination of arsenic 1980 GOST 0
3197 24469 Instruments for measurements laser radiation parameters. General technical requirements 1980 GOST 0
3198 12821 "Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions" 1980 GOST 0
3199 8281 Roll-formed steel unequal channels Dimensions - Incorporating Amendment 1: 07/85; Amendment 2: 10/87 1980 GOST 0
3200 23944 Modified wood. Terms and definitions 1980 GOST 0
3201 24379.0 FOUNDATION BOLTS. GENERAL TECHNICAL SPECIFICATIONS 1980 GOST 0
3202 12.2.044 Occupational safety standards system. Machines and equipment for oil transportation. Safety requirements 1980 GOST 0
3203 8.383 State System For Ensuring The Uniformity Of Measurements State Tests Of Measuring Tools General Statements - 1980 GOST 0
Incorporates Amendment 1: 1/1986 and Amendment 2:11/1986
3204 5497 Cold-rolled steel for saws of cottenscrubbering machines. Technical conditions 1980 GOST 0
3205 10707 Steel cold formed electrically welded tubes. Technical conditions 1980 GOST 0
3206 9206 Diamond powders. Specifications 1980 GOST 0
3207 7075 Hand-operated travelling cranes. Specifications 1980 GOST 0
3208 16370 Induction heating installations for higher frequencies. General specifications 1980 GOST 0
3209 23949 Welding nonconsumable tungsten electrodes. Specifications 1980 GOST 0
3210 478 Lead chromates. Specifications 1980 GOST 0
3211 839 Uninsulated wires for aerial power line. Specifications 1980 GOST 0
3212 12.2.022 Occupational safety standards system. Conveyors. General safety requirements - Amendment 1: 06/1986; (CMEA 1339- 1980 GOST 0
781)
3213 20580.6 Lead. Methods for the determination of tin 1980 GOST 0
3214 24299 Sulphate rayon pulp. Specifications 1980 GOST 0
3215 20260 Universal containers. Acceptance rules. Test methods 1980 GOST 0
3216 17007 Diamond wheels form 6A2T and 1A2T. Spesifisations 1980 GOST 0
3217 10032 "Stationary, travelling, auxiliary, marie diesel generator sets. Technical requirements to antomatization" 1980 GOST 0
3218 16037 "Welded joints in steel pipelines. Main types, design elements and dimensions" 1980 GOST 0
3219 8594 Boxes for incorporation of switches and receptacles for buried wiring. General specifications 1980 GOST 0
3220 633 Tubing pipes and couplings for them. Specifications 1980 GOST 0
3221 9324 Finishing single start hobbing cutters for cylindrical involute gears 1980 GOST 0
3222 20580.4 Lead. Methods for the determination of bismuth 1980 GOST 0
3223 24465 Condensate pumps for nuclear power plant. General technical requirements 1980 GOST 0
3224 15594 Throw-over type jaw track crawler-mounted log loaders. Specifications 1980 GOST 0
3225 14965 Synchronous three-phase generators of power above 100 kW. General specifications 1980 GOST 0
3226 17445 Hexachlorbenzene technical. Specifications 1980 GOST 0
3227 17336 Gauges for hebbing cutters. Types and basic parameters. General technical requirements 1980 GOST 0
3228 17006 "Diamond annular wheels, form 2A2. Specifications" 1980 GOST 0
3229 16166 Semi-wool fabrics for acidproof overalls. Technical specifications 1980 GOST 0
3230 24174 SIGNAL CONVERSION EQUIPMENT FOR PRIMARY BROADBAND CHANNELS TYPES AND KEY 1980 GOST 0
PARAMETERS - Includes Amd 1: 12/ 1990
3231 17435 DRAWING RULERS SPECIFICATIONS - Incorporating Amendment 1: 04/1974; Amendment 2: 04/1980; Amendment 1980 GOST 0
3: 04/1984; Amendment 4: 08/1988
3232 10495 HEXAGON NUTS FOR FLANGE JOINTS FOR PN ABOVE 10 TO 100 MPa (ABOVE 100 TO 1000 kgf/cm2). 1980 GOST 0
SPECIFICATIONS
3233 15581 Coupling and power selection capacitors for electric transmission lines. Specifications 1980 GOST 0
3234 1465 Files. Specifications 1980 GOST 0
3235 8.001 State system of ensuring the unity of measurements RULES FOR ORGANISING AND CONDUCTING STATE TESTS 1980 GOST 0
OF MEASURING TOOLS - Incorporating Amendment 1: 11/1986, Amendment 2: 1/1988; Amdendment 3: 1/1990
3236 24039 ASBESTOS-POLYMERIC SEALING SHEET MATERIALS METHOD OF DIMENSIONS AND DENSITY 1980 GOST 0
MEASUREMENT - (CMEA Standard 1222-78); Incorporates Amendment 1:9/1986 and Amendment 2: 7/1991
3237 11027 "Cotton terry-cloth, plain and waffled fabrics and piece-goods. General specifications" 1980 GOST 0
3238 9168 Intaglio printing paper. Specifications 1980 GOST 0
3239 9421 Container plain pasted fibreboard. Specifications 1980 GOST 0
3240 20580.3 Lead. Method for the determination of zinc 1980 GOST 0
3241 24464 Feed pumps for nuclear power plant. General technical requirements 1980 GOST 0
3242 3808.1 Coniferous sawn timber. Atmospheric drying and storage 1980 GOST 0
3243 10348 Plastics insulated multi-core installation cables. Specifications 1980 GOST 0
3244 16957 Multichannel amplitude analyzers. Basic parameters and general technical requirements 1980 GOST 0
3245 24030 Corrosion-resistant steel seamless tubes for power engineering industry. Specifications 1980 GOST 0
3246 12815 FLANGES FOR FITTINGS AND PIPELINES for Pnom from 0.1 to 20.0 Mpa (from 1 to 200 kgf/cm2) - Incorporating 1980 GOST 0
Amendment 1: 03/1983; Amendment 2: 12/1983; Amendment 3: 12/1987; Amendment 4: 09/1989 and Amendment 5:
04/1992; Includes Corrigendum: 2005 and Corrig
3247 11017 Steel seamless tubes for high pressure service. Specifications 1980 GOST 0
3248 16165 Transistor ultrasonic osillators for technological installations. General specifications 1980 GOST 0
3249 20580.2 Lead. Methods for the determination of copper 1980 GOST 0
3250 24454 Coniferons sawn timber. Sizes 1980 GOST 0
3251 12303 "Packs of paperboard, paper and composite materials. General specifications" 1980 GOST 0
3252 24244 Low carbon sheet coid-rolling for enamelled ware. Technical conditions 1980 GOST 0
3253 8570 Disk shavers 1980 GOST 0
3254 6637 Finisning invobete spline hobs. Technical conditions 1980 GOST 0
3255 23961 METRO STRUCTURAL, EQUIPMENT AND ROLLING STOCK CLEARANCES 1980 GOST 0
3256 2333 Steel wire. Types 1980 GOST 0
3257 18577 Thermoelectric semiconductor devices. Terms and definitions 1980 GOST 0
3258 14953 Taper countersinks. Specifications 1980 GOST 0
3259 8.381 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors 1980 GOST 0
3260 16491 Key broaches. Specifications 1980 GOST 0
3261 632 Casing pipes with couplings. Specifications - Incorporates Amendments 1: 10/1982; 2: 0/1986; 3: 06/1988; 4: 5/1989 1980 GOST 0
3262 6228 Circular screwing dies taper thread. Specifications 1980 GOST 0
3263 6410 "Shoes, soles and overboots are rubber and wellingtons confectined. Specifications" 1980 GOST 0
3264 20291 Sodium polyphosphate technical. Specifications 1980 GOST 0
3265 24311 Radiosonde paperboard. Specifications 1980 GOST 0
3266 24474 Marking instrument. General specifications 1980 GOST 0
3267 10300 COUNTERSUNK-HEAD RIVETS OF ACCURACY CLASSES B and C SPECIFICATIONS - Incorporates Amendments 1980 GOST 0
1: 4/1985 and 2: 6/1900; CMEA Standard 1020-78
3268 980 Flat disk saws for wood sawing. Specifications 1980 GOST 0
3269 9630 3-phase asynchronous motors of voltage over 1000 V. General specifications 1980 GOST 0
3270 18343 Pallet for bricksceramic hollow. Technical requirements 1980 GOST 0
3271 11249 Steel rolled up soldered double-layer tubes. Specifications 1980 GOST 0
3272 1931 Electrical insulating paper for winding. Specifications 1980 GOST 0
3273 20131 Pattern plates. Technical requirements 1980 GOST 0
3274 24163 Lactose-chelate-citrate-yalk (LKhTsZh) medium for stellion sperm conservation. Specification 1980 GOST 0
3275 16306 Granulated double superphosphate. Specifications 1980 GOST 0
3276 24106 Elbor grinding wheels. Technical conditions 1980 GOST 0
3277 23979 Sub for tubing. Specifications 1980 GOST 0
3278 19584 Units and changeable details of general purpose adjusting hammer dies for precisions die forging by means of crank 1980 GOST 0
presses. Technical requirements
3279 19689 Thin-layed glassreinforced plastics electrical heating elements. General technical requirements 1980 GOST 0
3280 18910 Hydraulic instruments and devices SSI. General specifications 1980 GOST 0
3281 6227 Taps for taper thread. Specifications 1980 GOST 0
3282 24303 Enameled cast-iron ware for domestic use. Specifications 1980 GOST 0
3283 20580.8 Lead. Method for the determination of iron 1980 GOST 0
3284 24471 Normal mine-type lighting equipment. General specification 1980 GOST 0
3285 16215 General-purpose fork lift trucks. General specifications 1980 GOST 0
3286 3333 Graphite grease. Specifications 1980 GOST 0
3287 17.2.4.01 Nature Protection ATMOSPHERE Method for determining the value of droplet entrainment after apparatus for wet 1980 GOST 0
scrubbing of dust and gas - Edition with Incorporating Amendment 1: 01/1986
3288 17366 Seel welded thick-walled barrels for chemical products. Specifications 1980 GOST 0
3289 13494 Geodetical protector. Specifications 1980 GOST 0
3290 24168 Frozen sperm of stellions. Specification 1980 GOST 0
3291 9359 CARBAMIDE-AND MELAMINE-FORMALDEHYDE MOULDING MATERIALS (AMINOPLASTS) 1980 GOST 0
SPECIFICATIONS - Incorporates Amendment 1: 2/1984, Amendment 2: 10/21/1988, Amendment 3: 12/26/1990,
Amendment 4: 4/10/1996
3292 24054 ENGINEERING AND INSTRUMENT PRODUCTION ITEMS LEAK TEST METHODS. GENERAL REQUIREMENTS 1980 GOST 0
- Includes Amendment 1: 8/1990
3293 2248 Flat thread-rolling dies 1980 GOST 0
3294 1147 Wood screws. General specifications 1980 GOST 0
3295 607 Multi-point diamonds for dressing grinding wheels. Specifications 1980 GOST 0
3296 17134 Relay type radioisotope instruments. General specifications 1980 GOST 0
3297 3022 Hybrogen technical. Specifications 1980 GOST 0
3298 24366 General-purpose fork-loft auto-and electric loaders. Loadcatching devices. General specifications 1980 GOST 0
3299 24509 Automatic cash registers. General specifications 1980 GOST 0
3300 3064 One lay rope type TK construction 1x37 (1+6+12+18). Dimensions 1980 GOST 0
3301 18685 CURRENT AND VOLTAGE TRANSFORMERS TERMS AND DEFINITIONS 1980 GOST 0
3302 14228 AUTOMATED DIESEL AND GAS ENGINES CLASSIFICATION BY AUTOMATION DEGREE 1980 GOST 0
3303 9231 Double shaft paddle mixers. Specifications 1980 GOST 0
3304 8994 Milling cutters for woodworking. Specifications 1980 GOST 0
3305 24360 Sheel and mills with inserted carbide teeth. Specifications 1980 GOST 0
3306 24482 Macroclimatic regions of the world with tropic climate. Regionalizing and statistical parameters of climatic factors for 1980 GOST 0
technical purposes
3307 13054 Alternators for tractors and automative agricultural machines. General specifications 1980 GOST 0
3308 12.2.049 Occupational safety standards system. Industrial equipment. General ergonomic requirements 1980 GOST 0
3309 15035 Underground scraper hoists. Specifications 1980 GOST 0
3310 14695 "Enclosed transformer substations of output from 25 to 2500 kVxA, for voltages up to 10 kV inclusive. General 1980 GOST 0
specifications"
3311 17493 Electric motor frequency changers with rated power of 250 kW and above. General specifications 1980 GOST 0
3312 17495 IRON ORES, CONCENTRATES, SINTERS AND PELLETS METHODS OF SAMPLE SELECTION AND 1980 GOST 0
PREPARATION FOR GRAIN-SIZE ANALYSIS - Includes Amendment 1: 1985 and Amendment 2: 1990
3313 9.105 Unified System of Corrosion and Ageing Protection PAINT AND VARNISH COATINGS Classification and Basic 1980 GOST 0
Parameters of Painting Methods - Incorporating Amendment 1: 01/1986 and Amendment 2: 12/1990
3314 23999 Calcium phosphate fodder. Specifications 1980 GOST 0
3315 24179 "Glass filters, filter-lenses, lenses, dispersers and diflecting insertion for railway transport light-signal. Specifications" 1980 GOST 0
3316 2034 Twist drills. Specifications 1980 GOST 0
3317 18172 Yellow iron oxide. Specifications 1980 GOST 0
3318 9511 Puff-pastry bakery products. Specifications 1980 GOST 0
3319 18518 Automatic flowihg producks filling maxines for paper or board consumer packoging. General specifications 1980 GOST 0
3320 14250.10 FERROTITANIUM TIN DETERMINATION METHODS - Amendment 1: April 1985; Amendment 2: November 1990 1980 GOST 0
3321 14106 Horizontal vulcanizing pans. General specifications 1980 GOST 0
3322 13932 Shell type inserted bead circular cutter blocks for woodcutting. Specifications 1980 GOST 0
3323 17433 Industries purity. Compressed air grades of contamination 1980 GOST 0
3324 10618 Thread forming screws for metals and plastics. General specifications 1980 GOST 0
3325 24201 Connecting peces and accessories of glass pipings. Specifications 1980 GOST 0
3326 1204 SWINGING BRAKE SHOE HOLDER FOR 1524-mm GAUGE RAILWAY CARS SPECIFICATIONS - Incorporating 1980 GOST 0
Amendment 1: 11/1969; Amendment 2: 1/1980; Amendment 3: 4/1983; Incorporating Amendment 4: 6/1991
3327 24126 VOLTAGE CONTROL DEVICES FOR LOADED POWER TRANSFORMERS GENERAL SPECIFICATIONS - CMEA 1980 GOST 0
Standard 634-77; Incorporating Amendment 1: 12/1986
3328 11290 Woodworking disk grooving cutters 1980 GOST 0
3329 20580.0 Lead. General requirements for methods of chemical analysis 1980 GOST 0
3330 24371 Electronic flash device for amateur photography. General specifications 1980 GOST 0
3331 24206 Pneumatic mathimatic operation instruments and devicas SSI. General specification 1980 GOST 0
3332 12.0.002 Occupational safety standards system. Terms and definitions 1980 GOST 0
3333 1184 Woodworking chisels and jouges 1980 GOST 0
3334 5336 Single woven steel wire cloth. Specifications 1980 GOST 0
3335 12536 SOILS METHODS OF LABORATORY DETERMINATION OF GRANULOMETRIC (GRAIN-SIZE) AND 1980 GOST 0
MICROAGGREGATE DISTRIBUTION
3336 16463 Solid carbide keyway cutters. Specifications 1980 GOST 0
3337 12812 Liquid thiokols. Specifications 1980 GOST 0
3338 297 Resistance welding machines. General technical requirements 1980 GOST 0
3339 12.4.091 Occupational safety standards system. Plastic miner‫_آ‬s helmets. Specifications 1980 GOST 0
3340 20580.1 Lead. Method for the determination of silver 1980 GOST 0
3341 1185 Carpenters and joiner chisels 1980 GOST 0
3342 16350 USSR CLIMATE ZONING AND STATISTICAL PARAMETERS OF CLIMATIC FACTORS FOR TECHNICAL 1980 GOST 0
PURPOSES
3343 1695 "HSS face milling cutters, straight and alternate angle milling cutters. Specifications" 1980 GOST 0
3344 10437 Furfural technical. Specifications 1980 GOST 0
3345 1339 Cartographic paper. Specifications 1979 GOST 0
3346 10325 Fur and fur trimmtd head-dresses. General specifications 1979 GOST 0
3347 13085 "Mineral water for export. Packing, marking, transportation and storage" 1979 GOST 0
3348 16469 Canal excavators. General technical conditions 1979 GOST 0
3349 23705 Hot-rolled and forged bars of heat resistant alloys. Specifications 1979 GOST 0
3350 16017 Inserted bolts for rail track fastenings. Design and dimensions. Technical requirements 1979 GOST 0
3351 19.504 Unified System of Program Documentation PROGRAMMER MANUAL Requirements for the contents and form of 1979 GOST 0
presentation - (CMEA Standard 2095-80); Incorporates Amendment 1: 9/1981
3352 12.4.072 "Occupational safety standards system. Boots, rubber moulded resistant to water, mineral oils and mechanical attacks for 1979 GOST 0
special purposes. Specifications"
3353 16016 Clamp bolts for rail track fastenings. Design and dimensions. Technical requirements 1979 GOST 0
3354 23697 Welded straight-seam pipes of aluminium alloys. Specifications 1979 GOST 0
3355 7931 Varnish natural 1979 GOST 0
3356 13547 "Butterfly wicket valves for Pnom to 2,5 MPa (25 kgf/cm2). General specifications" 1979 GOST 0
3357 12177 Cables, Wires and Cords Methods for Design Checking - Incorporates Amendments 1,2,3,&4:1997 1979 GOST 0
3358 613 Foundry Tin Bronzes Grades 1979 GOST 0
3359 12810 Green brick tea for export. Specifications 1979 GOST 0
3360 9937 Canned meat with white gravy. Specifications 1979 GOST 0
3361 1077 "Uniflame blowpipes for oxyacetylene welding, brazing and preheating. Basic parameters and dimensions and general 1979 GOST 0
technical requirements"
3362 1215 Malleable iron castings. General specifications 1979 GOST 0
3363 2284 Cold-rolled carbon structural steel strip. Specifications 1979 GOST 0
3364 23630.2 Plastics. Method for the determination of thermal conductivity 1979 GOST 0
3365 6742 Book-end paper. Specifications 1979 GOST 0
3366 3714 Raw cured cigars tobacco. Specification 1979 GOST 0
3367 23619 REFRACTORY HEAT-INSULATING MULLITE-SILICA GLASS-FIBROUS MATERIALS AND PRODUCTS 1979 GOST 0
Specifications - Edition with Incorporating Amendment 1: 12/1985 and Amendment 2: 06/1990
3368 9553 SILICATE GLASS AND GLASS-CERAMIC MATERIALS METHOD FOR DENSITY DETERMINATION 1979 GOST 0
3369 2479 ELECTRIC ROTATING MACHINES CONVENTIONAL DESIGNATIONS OF STRUCTURE AND MOUNTING 1979 GOST 0
MODIFICATIONS - (CMEA Standard 246-76); Includes Amd 1: 10/1989
3370 14614 Plywood plus. Specifications 1979 GOST 0
3371 9245 Measuring d.c. potentiometers. General specifications 1979 GOST 0
3372 16100 NIOBIUM BILLETS SPECIFICATIONS - Amendment 1:1985; Amendment 2:1989 1979 GOST 0
3373 23786 Drill pipes of aluminium alloys. Specifications 1979 GOST 0
3374 23681 Fresh non-diluted sperm of stallions. Specification 1979 GOST 0
3375 23630.1 Plastics. Method for the determination of thermal capacity 1979 GOST 0
3376 7368 Pressed sturgeon caviar. Specifications 1979 GOST 0
3377 23444 CENTRIFUGATED REINFORCED CONCRETE POSTS OF ANNULAR SECTION FOR INDUSTRIAL BUILDINGS 1979 GOST 0
AND STRUCTURES. Specifications
3378 4752 Copper cylinder wire. Technical conditions 1979 GOST 0
3379 18698 Textile carcass rubber pressure hoses. Specifications 1979 GOST 0
3380 2239 Electric filament lamps for general purpose. Specifications 1979 GOST 0
3381 228 Stud-link anchor chains. General specifications 1979 GOST 0
3382 23677 Hardness testing machines for metals. General technical requirements 1979 GOST 0
3383 23600 Food concentrates. Dry soups with fish and seaproducts. Specifications 1979 GOST 0
3384 19703 Wire of lead brass of grade LS 63-3. Specifications 1979 GOST 0
3385 9486 Alternating current measuring bridges. General requirements 1979 GOST 0
3386 14037 Canvas boots with rubber moulded on vamps and soles. Specifications 1979 GOST 0
3387 14162 Steel tubes of small dimensions (capillary). Specifications 1979 GOST 0
3388 23672 Dolomite for glass industry. Specifications 1979 GOST 0
3389 2213 A. c. fuses for voltages 3 kV and higher. General specifications 1979 GOST 0
3390 17751 JET FUEL METHOD FOR DETERMINATION OF THERMAL-OXIDATION STABILITY IN DYNAMIC 1979 GOST 0
CONDITIONS - CMEA Standard 3968-83; Amendment 1:1984
3391 3152 "Cotton fibre, linted and ginning houses fibrous waste. Packing, marking, transportation and storage" 1979 GOST 0
3392 13215 Thrust centres and semicentres. Technical requirements 1979 GOST 0
3393 6247 Steel welded barrels with hoops of rolling on casing. Specifications 1979 GOST 0
3394 5191 "Injection blowpipes for manual oxy-cutting. Types, basic parameters and general technical requirements" 1979 GOST 0
3395 19.506 Unified System of Program Documentation LANGUAGE DESCRIPTION Requirements for the contents and form of 1979 GOST 0
presentation - (CMEA Standard 2097-80); Incorporates Amendment 1: 09/1981
3396 5044 Thin-walled steel drums for chemical products. Specifications 1979 GOST 0
3397 7987 "Canned meat ""Goulash"". Specifications" 1979 GOST 0
3398 23745 Fresh non-diluted sperm of bulls. Specification and test methods 1979 GOST 0
3399 23551 Wooden raw materials for manufacturing modified wood. Specifications 1979 GOST 0
3400 23671 Lampy limestone for glass industry. Specifications 1979 GOST 0
3401 14265 Direct acting analogue contact electrical measuring instruments. General specifications 1979 GOST 0
3402 10289 Oil for marine gas turbines. Specifications 1979 GOST 0
3403 19875 Electrical measuring recording fast-acting instruments. General specifications 1979 GOST 0
3404 19.507 Unified System of Program Documentation LIST OF OPERATIONAL DOCUMENTS - (CMEA Standard 2091-80); 1979 GOST 0
Incorporates Amendment 1: 09/1981
3405 23881 Dried purified tuberculin (PPD) for birds. Specification 1979 GOST 0
3406 7060 Comfit. Specifications 1979 GOST 0
3407 13418 Facilities of automation and instruments electric discrete SSI. General specifications 1979 GOST 0
3408 23907 Anti-icer fluids for flying vehicles. General technical requirements 1979 GOST 0
3409 14791 Sealing non-hardening buiding mastic. Specifications 1979 GOST 0
3410 23732 Water for concretes and mortars 1979 GOST 0
3411 17217 Tubes of copper-nickel alloy MNZh5-1. Specifications 1979 GOST 0
3412 6323 Wires with PVC-insulation for electrical equipment. Specifications 1979 GOST 0
3413 16018 Nuts for clamp and inserted bolts of rail track fastenings. Design and dimensions. Technical requirements 1979 GOST 0
3414 17335 Positive-displacement pumps. Acceptance rules and test methods 1979 GOST 0
3415 13837 General-purpose dynamometers. Specifications 1979 GOST 0
3416 3242 Welded joints. Quality control methods 1979 GOST 0
3417 397 Splints. Technical conditions 1979 GOST 0
3418 18194 Installations for oil and oil products botton loading unloading from railway tank cars. Technical specifications 1979 GOST 0
3419 14794 Dry-type concrete current-limiting reactors. Specifications 1979 GOST 0
3420 8.361 State system for ensuring the uniformity of measurements. Technique of measuring by the velocity at a single point of a 1979 GOST 0
pipe cross-section
3421 19356 Pleasure craft row boats and motor boats. Test methods 1979 GOST 0
3422 23510 UNIOL-2 Grease. Specifications 1979 GOST 0
3423 5244 Wood shavings. Specifications 1979 GOST 0
3424 2263 Sodium hydroxide for industrial use. Specifications 1979 GOST 0
3425 23913 Electrometric measurement means. General technical requirements 1979 GOST 0
3426 3822 Bimetallic copper-steel wire. Specifications 1979 GOST 0
3427 19.505 Unified System of Program Documentation OPERATOR MANUAL Requirements for the contents and form of 1979 GOST 0
presentation - (CMEA Standard 2096-80); Incorporates Amendment 1: 09/1981
3428 23740 SOILS METHODS FOR LABORATORY DETERMINATION OF ORGANIC SUBSTANCES CONTENT 1979 GOST 0
3429 11616 "Natural dressed skins of baum marten, stone marten, kidus and charsa. Specifications" 1979 GOST 0
3430 23639 Additive KP. Specifications 1979 GOST 0
3431 23513 Feeds in cakes pellets. Specifications 1979 GOST 0
3432 23737 Electric resistance measures. General specifications 1979 GOST 0
3433 18977 COMPLEXES OF AIRBORNE EQUIPMENT OF AIRPLANES AND HELICOPTERS TYPES OF FUNCTIONAL 1979 GOST 0
BINDINGS TYPES AND LEVELS OF ELECTRIC SIGNALS
3434 12221 Apparatus for plasma-arc cutting of metals. Types and basic parameters 1979 GOST 0
3435 1028 Black powder. General specification 1979 GOST 0
3436 23649 "Sealed radiation sources. Marking, packing, transporting and storing" 1979 GOST 0
3437 18130 Semi-automatic consumable-electrode arc-welding machines. General specifications 1979 GOST 0
3438 18477 "Universal containers. Types, basic parameters and dimensions" 1979 GOST 0
3439 25.502 Strength analysis and testing in machine building. Methods of metals mechanical testing. Methods of fatigue testing 1979 GOST 0
3440 23540 Balance leaf chains with solid pins. Specifications 1979 GOST 0
3441 23643 Radioisotope therapeutical appratuses for contact irradation. Parameters 1979 GOST 0
3442 6052 Pasteurized sturgeon caviar. Specifications 1979 GOST 0
3443 4.250 SYSTEM OF PRODUCT QUALITY INDICES. CONSTRUCTION. CONCRETE AND REINFORCED CONCRETE 1979 GOST 0
PRODUCTS AND STRUCTURES. Range Of Indices
3444 9769 Wood-working carbide-tipped circular saws. Specifications 1979 GOST 0
3445 11326.0 Radio-frequency cables. General specifications 1978 GOST 0
3446 6331 Liquid technical and medical oxygen. Specifications 1978 GOST 0
3447 11946 LENSES AND SETS OF LENSES FOR RAILWAY TRANSPORT SIGNAL DEVICES METHODS OF MEASURING 1978 GOST 0
LUMINOUS INTENSITY AND FOCAL DISTANCE
3448 18320 Technological wooden sawdust for hydrolysis. Specifications 1978 GOST 0
3449 22929 Leakage carrent mine-type protective devices for voltages up to 1200 V. General specifications 1978 GOST 0
3450 23389 Land levelers. General technical requirements 1978 GOST 0
3451 23154 Apparatus gamma-therapeutic static and rotary for long-distance irradiation. General specifications 1978 GOST 0
3452 19.603 Unified system of program documentation GENERAL RULES FOR AMENDMENTS INSERTION - (CMEA Standard 1978 GOST 0
2089-80); Incorporates Amendment 1: 09/1981
3453 5583 Technical and medical oxygen gas. Specifications 1978 GOST 0
3454 12.2.037 Occupational safety standard system. Fire engineering. Safety requirements 1978 GOST 0
3455 14651 Electrode holders for manual arc welding. Specifications 1978 GOST 0
3456 5956 Granulated superphosphate from apatite concentrate with and without additives of microelements. Specifications 1978 GOST 0
3457 3483 Green brick tea. Specifications 1978 GOST 0
3458 10541 Universal motor and automobile carburettor engine oils. Specifications 1978 GOST 0
3459 23361 Foam detergents. Specifications 1978 GOST 0
3460 23093 Drying installations for varnish-and-paint coatings. Types and basic dimensions 1978 GOST 0
3461 12.2.036 Occupational safeti standards system. Press moulds for manufacturing mechanical-rubber articles. General safety 1978 GOST 0
requirements
3462 14963 Alloyed steel spring wire. Specifications 1978 GOST 0
3463 7262 Copper wires insulated by vanish VL-931. Specifications 1978 GOST 0
3464 22782.4 Explosionproof electrical apparatus. Pressurized enclosure. Technical requirements and methods of testing 1978 GOST 0
3465 3945 Fish preserves. Whole fish in spice brine. Specification 1978 GOST 0
3466 23269 STATIONARY STEAM TURBINES TERMS AND DEFINITIONS 1978 GOST 0
3467 190 Oxol varnish. Specification 1978 GOST 0
3468 12.2.033 Occupational safety standards system. Operator‫_آ‬s location in a standing position. General ergonomic requirements 1978 GOST 0
3469 15836 Bitumen-rubber insulating mastic. Specifications 1978 GOST 0
3470 4938 Drilling rotors and for oil and gas wells repair. Basis parameters and dimensions 1978 GOST 0
3471 7484 FACING CERAMIC BRICKS AND STONES SPECIFICATIONS 1978 GOST 0
3472 12.2.032 Occupational safety standards system. Operator‫_آ‬s location in a sitting position. General ergonomic requirements 1978 GOST 0
3473 23275 Blood serum of mare in foal (BSMF). Specifications 1978 GOST 0
3474 17.5.3.01 Nature protection. Lands. Structure and size of suburban green zones - Amendment 1:1988 1978 GOST 0
3475 7780 Linen and half-linen fabrics and piece goods. Norms of colour fastness and methods for determination 1978 GOST 0
3476 15123 Simazine-50% and 80% wettable powders. Specifications 1978 GOST 0
3477 23055 Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results 1978 GOST 0
3478 10772 Water foundry coatings for mould paints. General specifications 1978 GOST 0
3479 13843 Aluminum Rolled Wire Specifications - Incorporates Amendment 1: 4/1984 1978 GOST 0
3480 13208 Pyrotechnic photoilluminating items. Photometering method 1978 GOST 0
3481 23120 STEEL STAIRWAYS, LANDINGS AND RAILINGS SPECIFICATIONS 1978 GOST 0
3482 11948 Devices for measurement of detonation velocity oscilation and parasitic amplitude modulation factors for sound recording 1978 GOST 0
and reproduction apparatus. Technical requirements and test methods
3483 17817 Graphite. Methods of sampling and preparation of samples for testing 1978 GOST 0
3484 23178 High-temperature fluoroborate and boride halogenide fluxes for soldering. Specifications 1978 GOST 0
3485 16092 Multicore flexible aerial cables. Specifications 1978 GOST 0
3486 12.4.040 Occupational safety standards system. Control elements of manufacturing equipment. Notation 1978 GOST 0
3487 22976 Hydraulic and pneumatic power drives and lubricating systems. Acceptance 1978 GOST 0
3488 18175 TIN-FREE PRESSURE-WORKED BRONZES Grades - Incorporating Amendment 1: 03/1980; Amendment 2: 04/1988 1978 GOST 0
3489 18663 Vitamin B12 feed grade. Specifications 1978 GOST 0
3490 7455 Canned fish in jelly. Specifications 1978 GOST 0
3491 9382 Woollen and half-woollen blankets. General requirements 1978 GOST 0
3492 781 Highoxidized petroleum bitumen softener. Specifications 1978 GOST 0
3493 22988.0 Gas counters. Methods of characteristic measurement. General principles 1978 GOST 0
3494 11501 PETROLEUM BITUMENS TEST METHOD FOR NEEDLE PENETRATION DEPTH - Incorporating Amendment 1: 1978 GOST 0
5/1983; Amendment 2: 4/1984; Amendment 3: 11/1988; Amendment 4: 2/1992
3495 23121 STEEL CRANE-RUNWAY BEAMS FOR GENERAL-PURPOSE OVERHEAD TRAVELLING ELECTRIC CRANES 1978 GOST 0
OF 50 T LOAD-CARRYING CAPACITY. Specifications
3496 529 Radiator tubes. Technical requirements 1978 GOST 0
3497 3134 White spirit. Specifications 1978 GOST 0
3498 23182 Grinding wheels for hand grinders. Technical conditions 1978 GOST 0
3499 434 "Copper rectangular wire, strips and bars for electrical use. Specifications" 1978 GOST 0
3500 17410 Nondestructive inspection METAL SEAMLESS CYLINDRICAL PIPES Ultrasonic Flaw Detection Methods - 1978 GOST 0
Incorporating Amendment 1: 06/1984 and Amendment 2: 06/1988
3501 17.2.3.02 Nature protection ATMOSPHERE Rules for establishing permissible discharges of noxious substances from industrial 1978 GOST 0
enterprises
3502 8732 Seamless hot-deformed steel pipes. Range of sizes 1978 GOST 0
3503 12265 "Moulded rubber boots protecting from petroleum, petroleum products and fats. Specifications" 1978 GOST 0
3504 8560 Rolled-stock calibrated hexahedronal. Range of products 1978 GOST 0
3505 18404.0 Control cables. General specifications 1978 GOST 0
3506 13350 SSI conductometric liguid analysers . General specifications 1978 GOST 0
3507 801 Ball-bearing steel. Technical conditions 1978 GOST 0
3508 5220 Germen silver wire. Technical requirements 1978 GOST 0
3509 19.604 Unified system of program documentation RULES FOR AMENDMENTS INSERTION IN PRINTED PROGRAM 1978 GOST 0
DOCUMENTS - (CMEA Standard 2089-80); Incorporates Amendment 1: 09/1981
3510 13527 All-wool and blended piece goods and printed fabrics. Norms of colour fastness and methods for determination 1978 GOST 0
3511 23258 Plastic greases. Name and designation 1978 GOST 0
3512 16774 Copper tubes of rectangular and square section. Specifications 1978 GOST 0
3513 16446 Lyophilizated complement for the complement fixation test. Specification 1978 GOST 0
3514 14361 OIL OF TYPE FM-5,6 AP FOR REFRIGERATING MACHINES SPECIFICATIONS - Amendment 1:1983; Amendment 1978 GOST 0
2:1988; Amendment 3:1992
3515 7699 Potato starch. Specification 1978 GOST 0
3516 14621 Sponge rolls. Specifications 1978 GOST 0
3517 23050 Biological preparations. Virusvaccinia VGNKI dry cultural against Aujeszky disease. Specifications 1978 GOST 0
3518 112 Meteorological glass thermometers. Specifications 1978 GOST 0
3519 1508 Control rubber- and plastic-insulated cables. Specifications 1978 GOST 0
3520 8072 Fermented tobacco-material. Specifications 1977 GOST 0
3521 13548 Thin-walled tubes of nickel and nickel alloys. Specifications 1977 GOST 0
3522 10232 "All-linen, linen and half-linen towelling and towels. General specifications" 1977 GOST 0
3523 12427 Canned meat. Estonian pasty. Specifications 1977 GOST 0
3524 12162 "Carbon dioxide, solid. Specification" 1977 GOST 0
3525 22411 Hot-rolled and forged bars of alloys. Dimensions 1977 GOST 0
3526 10231 Dressed krimmer lamb. Specifications 1977 GOST 0
3527 2624 Capillary copper and brass tubes. Specifications 1977 GOST 0
3528 22776 Products from abrasive paper. Technical conditions 1977 GOST 0
3529 22551 "Quartz sand, ground sandstone, quartzite and veiny quartz for glass industry. Specifications" 1977 GOST 0
3530 8568 Corrugated steel rhombic and lentil form sheets. Specifications 1977 GOST 0
3531 5221 Tin-zinc bronze wire. Specifications 1977 GOST 0
3532 22336 Life jackets. Technical specifications 1977 GOST 0
3533 22841 Granulated mixed feed-concentrates for trained and sporting horses. Specifications 1977 GOST 0
3534 11151 All-wool and half-woolen fabrics. Standards of colour fastness and methods for determination 1977 GOST 0
3535 22749 Relieved woodworking cutters. Technical conditions 1977 GOST 0
3536 11826 Oil paints and pentaoil for artists use. Specifications 1977 GOST 0
3537 12424 "Canned meat. ""Prazhskiy"" pasty. Specifications" 1977 GOST 0
3538 15040 Oxygen-free copper pipes. Specifications 1977 GOST 0
3539 22483 Copper and aluminium conductors for cables and wires. Main parameters. Technical requirements 1977 GOST 0
3540 5307 Constant noninsulated wire. Specifications 1977 GOST 0
3541 2635 Photographic base paper. Specifications 1977 GOST 0
3542 3050 Hose connections for flexible hoses of water pumps. Specifications 1977 GOST 0
3543 515 Bituminized and tarred packing paper. Specifications 1977 GOST 0
3544 5972 Tooth - powder. Specification 1977 GOST 0
3545 828 Technical sodium nitrate. Specifications 1977 GOST 0
3546 6238 Casing and coring pipes for geology-exploring drilling and nipples for them. Specifications 1977 GOST 0
3547 13213 Plate-shaped lentil ( food-grade) for export. Specifications 1977 GOST 0
3548 17.1.3.02 Nature protection. Hydrosphere. Regulations for protection of waters from contamination due to drilling and operation of 1977 GOST 0
oil or gas sea wells
3549 1790 "Wire of chromel, alumel, copel and constantan for thermoelectrodes of thermoelectrical transducers. Specifications" 1977 GOST 0
3550 13073 Zinc wire. Specifications 1977 GOST 0
3551 22661 "Spreader for 3,0; 5,0 and 6,0 TONS GROSS weignt containers. Specifications" 1977 GOST 0
3552 22786 Bimetalic seamless tubes for shipbuilding. Specifications 1977 GOST 0
3553 12.4.033 Safety leather shoes for protection against slipping on fatty surfases. Specifications 1977 GOST 0
3554 9369 Globoid gear pairs. Basic parameters 1977 GOST 0
3555 2190 Sapper wire. Specifications 1977 GOST 0
3556 22666 Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications 1977 GOST 0
3557 22378 GAS-TURBINE ENGINES DETERMINATION OF ROTOR AND SHAFT ROTATIONAL DIRECTION 1977 GOST 0
3558 15834 Wire of beryllium bronze. Technical conditions 1977 GOST 0
3559 22356 High strength bolts and nuts and washers. General technical requirements 1977 GOST 0
3560 8490 X-ray tube. General specifications 1977 GOST 0
3561 22782.3 Explosionproof electrical apparatus. Special construction. Technical requirements and methods of testing 1977 GOST 0
3562 14955 Quality round steel with special surface finish. Specifications 1977 GOST 0
3563 22859 Hydraulic hoisters on vehicles. Specifications 1977 GOST 0
3564 7950 Binders board. Specifications 1977 GOST 0
3565 11597 Fur dressed skins of house cat. Specifications 1977 GOST 0
3566 22455 "Meal, seaweed. Specification" 1977 GOST 0
3567 7724 Meat. Pork carcasses and semi-carcasses. Specification 1977 GOST 0
3568 10234 Moderate strength flattened steel strip. Specifications 1977 GOST 0
3569 22530 STATIONARY STEAM EXHAUST-HEAT AND WASTE-FUEL BOILERS TYPES AND KEY PARAMETERS - 1977 GOST 0
Incorporating Amendment 1:02/1980; Amendment 2: 06/1983, Amendment 3: 06/1985; Amendment 4: 09/1987
3570 22626 Neutron generators. General technical requirements 1977 GOST 0
3571 13451 Feldspar and quartzfeldapar raw material for glass industry. Specifications 1977 GOST 0
3572 11615 Dressed skins of marmot and marmot-tarbagan. Specification 1977 GOST 0
3573 12186 Canned meat. Pork sausage meat. Specifications 1977 GOST 0
3574 19.101 Unified system for program documentation. Types of programs and program documents 1977 GOST 0
3575 7066 Lentil for human consumption (plate - shaped). Requirements for state purchases and deliveries 1977 GOST 0
3576 2310 Steel bench hammers. Technical conditions 1977 GOST 0
3577 13302 Petroleum acids. Specifications 1977 GOST 0
3578 12319 Canned meat. Liver pasty. Specifications 1977 GOST 0
3579 22469 Swimming rubber flippers. General specifications 1977 GOST 0
3580 12.4.032 Safety leather shoes for protection against high temperatures. Specifications 1977 GOST 0
3581 7277 Drawing paper. Specifications 1977 GOST 0
3582 6657 Post paper. Specifications 1977 GOST 0
3583 10219 XENON SPECIFICATIONS - Incorporates Amendments 1: 4/1983 and Amendment 2: 12/1987 and Amendment 3: 1977 GOST 0
08/1993; Incorporates Corrigendum 8: 1983 and 12: 1987 and 8: 1993
3584 310.1 CEMENTS. TEST METHODS 1976 GOST 0
3585 21752 Human being-machine system. Control handwheels and steering wheels. General ergonomic requirements 1976 GOST 0
3586 21833 Fresh peaches. Specifications 1976 GOST 0
3587 11881 "Controllers acting without an independent energy source, SSI. General specifications" 1976 GOST 0
3588 12.1.010 Occupational safety standards system. Explosion safety. General requirements 1976 GOST 0
3589 8699 Cigars. Specifications 1976 GOST 0
3590 4661 Dressed fur sheepskin. Specifications 1976 GOST 0
3591 7229 Cables, Wires and Cords Method for Determination of Electrical Resistance of Current-Carrying Cores and Conductors 1976 GOST 0
3592 12.4.029 Special aprons. Specifications 1976 GOST 0
3593 6968 Acetic acid by wood distillation. Specifications 1976 GOST 0
3594 21753 Man-machine system. Control levers. General ergonomic requirements 1976 GOST 0
3595 22269 Man-machine system. Operator‫_آ‬s working place. Arrangement of working place elements. General ergonomics 1976 GOST 0
requirements
3596 11878 AUSTENITIC STEEL METHODS FOR THE DETERMINATION OF ‫_خ‬-PHASE CONTENT - Incorporating 1976 GOST 0
Amendment 1: 10/1974; Amendment 2: 12/1987
3597 12.4.028 Occupational safety standards system. Respirators ShB-1‫_آ‬Lepestok‫_آ‬. Specifications 1976 GOST 0
3598 21831 Food concentrates. Baby and dietetic dry foods. Technical specifications for exported foods 1976 GOST 0
3599 108 Cocoa-powder. Specifications 1976 GOST 0
3600 21743 Aviation oils. Specifications 1976 GOST 0
3601 6656 Writing paper of trimmed sizes. Specifications 1976 GOST 0
3602 12.4.024 Occupational safety standards system. Special vibration protection boots. General technical requirements 1976 GOST 0
3603 21997 High-tensile steel flattened strip. Specifications 1976 GOST 0
3604 21825 Gastric juice natural ‫_آ‬equine‫( _آ‬for veterinary purposes). Specifications 1976 GOST 0
3605 21729 Cold-deformed and hot-deformed structural carbon and alloyed steel tubes. Specifications 1976 GOST 0
3606 14957 STRAINED MAGNESIUM-BASE ALLOYS Grades - Incorporating Amendment 1: 11/1982 1976 GOST 0
3607 12011 RECTIFYING COLUMNS WITH COPPER CAP TRAYS TYPES, KEY PARAMETERS AND DIMENSIONS 1976 GOST 0
3608 21714 Fresh pears of early ripening. Specifications 1976 GOST 0
3609 9167 Canned pasteurized smoked bacon in slices. Specifications 1976 GOST 0
3610 8758 Gram chir-pea. Requirements for state purchases and deliveries 1976 GOST 0
3611 7936 Horological thickened oil PS-4. Specifications 1976 GOST 0
3612 10506 Hoist closed wire ropes. Assortment 1976 GOST 0
3613 21481 Cross-bred dressed persian lamb. Specifications 1976 GOST 0
3614 13053 Pneumatic instruments and devices SSI. General specification 1976 GOST 0
3615 10877 Conservation oil K-17. Specifications 1976 GOST 0
3616 201 Tribasic sodium phosphate. Specifications 1976 GOST 0
3617 21829 ‫«آ‬MAN-MACHINE‫ »آ‬SYSTEM. CODING OF VISUAL INFORMATION General Ergonomic Requirements 1976 GOST 0
3618 8771 Petroleum bitumen for filling accumulator mastics. Specifications 1976 GOST 0
3619 10505 Closed steel wire ropes for lifting purposes. Specifications 1976 GOST 0
3620 21958 "HUMAN-MACHINE" SYSTEM OPERATORSâ__ ROOM AND COMPARTMENTS. WORKPLACES 1976 GOST 0
ARRANGEMENT GENERAL ERGONOMIC REQUIREMENTS
3621 21920 Fresh large-sized plum and alycha. Specifications 1976 GOST 0
3622 12.2.025 Occupational safety standards system. Equipment of medical technique. Electrical safety. General technical requirements 1976 GOST 0
and test methods
3623 7913 Cotton mixed fabrics and piece goods. Norms of colour fastness and methods determination 1976 GOST 0
3624 22298 Coniferous saw logs for export. Technical requirements 1976 GOST 0
3625 17.2.1.01 Nature protection. Atmosphere. Classification of emissions according to their composition - Amendment 1:1980 1976 GOST 0
3626 6411 Heavy cylinder oils. Specifications 1976 GOST 0
3627 5654 Steel seamless hot-deformed tubes for shipbuilding. Specifications 1976 GOST 0
3628 22297 Coniferous pitprops for export. Technical requirements 1976 GOST 0
3629 21508 ANTIICING OF PLANES AND HELICOPTERS TERMS AND DEFINITIONS 1976 GOST 0
3630 21784 "Poultry meat (carcasse of hens, ducks, geese, turkeys, guinea-fowls). Technical requirements" 1976 GOST 0
3631 21904 Mixed concentrated granular feed for breeding mares 1976 GOST 0
3632 11269 Alloyed universal structural high-grade rolled steel plates and wide strips for special purposes. Specifications 1976 GOST 0
3633 22299 Broad-leaved sawlogs for export. Technical requirements 1976 GOST 0
3634 21534 OIL METHODS FOR DETERMINATION OF CHLORIDE SALTS CONTENT - Incorporates Amendments 1-2; CMEA 1976 GOST 0
Standard 2879-81
3635 21921 Fresh cherries. Specifications 1976 GOST 0
3636 21944 Steel column vessels of diameter from 600 to 10000 mm. Distance between trays 1976 GOST 0
3637 21791 Oils synthetic MAS-30NK. Technical requirements 1976 GOST 0
3638 9936 Meat cans. Tourist breakfast. Specifications 1976 GOST 0
3639 3187 Wire weaved cloth with nets. Specifications 1976 GOST 0
3640 10121 Transformer oil of selective purification. Specifications 1976 GOST 0
3641 8.207 State system for ensuring the uniformity of measurements. Direct measurements with multiple observations. Methods of 1976 GOST 0
processing the results of observations. Basic principles - Incorporating Corrigendum: 1977
3642 13805 Dry fermentation pepton for bacteriological objects. Specifications 1976 GOST 0
3643 3399 Medical rubber tubes. Specifications 1976 GOST 0
3644 10583 RAPE FOR INDUSTRIAL PROCESSING SPECIFICATIONS - Incorporates Amendment 1: 07/1987 and Amendment 2: 1976 GOST 0
11/1990
3645 6617 CONSTRUCTION OIL BITUMENS SPECIFICATIONS - Amendment 1:1982; Amendment 2:1987; Amendment 3:1990; 1976 GOST 0
Amendment 4:1991; Amendment 5:2001
3646 21945 Seamless hot-rolled tubes from alloys based on titanium. Specifications 1976 GOST 0
3647 21489 BROWN COALS, BLACK COALS AND ANTHRACITES DIVISION INTO STAGES OF METAMORPHISM AND 1976 GOST 0
CLASSES BY VITRINITE REFLECTANCE INDEX - Incorporating Amendment 1: 12/1980 and Amendment 2: 12/1985
3648 11268 THIN SHEETS OF SPECIAL PURPOSE HIGH QUALITY STRUCTURAL ALLOYED STEEL SPECIFICATIONS 1976 GOST 0
3649 8851 Strip of steel grades 11kp and 11IuA. Specifications 1976 GOST 0
3650 21713 Fresh pears of late ripening. Specifications 1976 GOST 0
3651 3345 CABLES, WIRES AND CORDS METHOD OF DETERMINATION OF INSULATION RESISTANCE - (CMEA 1976 GOST 0
Standard 2784-80); Amd 1: 9/1981; Amd 2: 6/1988
3652 7837 Small shot sporting and buck-shot. Specifications 1976 GOST 0
3653 6750 Copper nails for shipbuilding. Specifications 1975 GOST 0
3654 21196 Neutron moisture gauges. General requirements 1975 GOST 0
3655 20729 Nutrient media. Meat water (for veterinary purposes). Specifications 1975 GOST 0
3656 21029 Aluminium barrels for chemical products. Specifications 1975 GOST 0
3657 10127 Moisture-proof base paper for abrasive materials. Specifications 1975 GOST 0
3658 9031 Standardized blocks of hardness. Specifications 1975 GOST 0
3659 20402 Sausage cooked stuffed. Specifications 1975 GOST 0
3660 2936 Plane-oval seamless radiator tubes. Specifications 1975 GOST 0
3661 21184 Lamb skins dressed. Specifications 1975 GOST 0
3662 7222 "Wire of gold, silver and their alloys. Specifications" 1975 GOST 0
3663 9583 CAST-IRON PRESSURE PIPES MANUFACTURED BY METHODS OF CENTRIFUGAL AND SEMICONTINUOUS 1975 GOST 0
CASTING
3664 6356 OIL PRODUCTS Test method for flash point in closed cup - Incorporating Amendment 1: 3/1981; Amendment 2: 8/1986 1975 GOST 0
and Amendment 3: 11/1989
3665 2787 Ferrous secondary metals. General specifications 1975 GOST 0
3666 21010 Dielectric screw-drivers. Specifications 1975 GOST 0
3667 4045 Vise with hand driwes. Specifications 1975 GOST 0
3668 5529 Brass round wire for shoe industry. Specifications 1975 GOST 0
3669 9014.0 Round timber. Storage. General requirements 1975 GOST 0
3670 16555 THREE-PHASE OIL-IMMERSED HERMETIC POWER TRANSFORMERS SPECIFICATIONS - Amendment 1:1979; 1975 GOST 0
Amendment 2:1981; Amendment 3:1984; Amendment 4:1984; Amendment 5:1985; Amendment 6:1987; Amendment
7:1990
3671 20568 Rubber masks for submarine swimming. General specifications 1975 GOST 0
3672 21178 Bent and glued blanks. Specifications - Incorporating Amendment 1: 12/1980, Amendment 2: 4/1986 1975 GOST 0
3673 11534 MANUAL ARC WELDING. ACUTE- AND OBTUSE-ANGLE WELD JOINTS. MAIN TYPES, STRUCTURAL 1975 GOST 0
ELEMENTS AND DIMENSIONS
3674 9932 Laboratory glass flowmeters. Specifications 1975 GOST 0
3675 2715 METAL WIRE MESH TYPES, BASIC PARAMETERS AND DIMENSIONS - Incorporating Amendment 1: 6/1986 1975 GOST 0
3676 21007 Platinum wire for resistive temperature transducers. Specifications 1975 GOST 0
3677 8695 PIPES Collapse test method - Incorporating Amendment 1: 04/1980 1975 GOST 0
3678 21447 AUTOMATIC COUPLING CONTOUR LINE DIMENSIONS 1975 GOST 0
3679 8694 PIPES Expansion Test Method - Incorporating Amendment 1: 4/1980 1975 GOST 0
3680 5702 Process grease SP-3. Specifications 1975 GOST 0
3681 6722 Technical filter board. Specifications 1975 GOST 0
3682 2708 Round timber. Volume tables 1975 GOST 0
3683 1940 Black brick-tea. Specifications 1975 GOST 0
3684 12.2.011 Occupational safety standards system. Road and construction machinery. General safety requirements 1975 GOST 0
3685 20967 Aluminium alloys rolled wire. Specifications 1975 GOST 0
3686 7210 Hand metal cuttind shears. Specifications 1975 GOST 0
3687 21311 Frozen sharks for export. Specifications 1975 GOST 0
3688 7758 Food beans. Specifications 1975 GOST 0
3689 9243 Compressor oil from sulphurbearing crude KS-19. Specifications 1975 GOST 0
3690 2179 Nickel and siliceous nickel wire. Specifications 1975 GOST 0
3691 20692 Roller bits. Types and main dimensions. Technical requirements 1975 GOST 0
3692 8559 Calibrated square steel. Dimensions 1975 GOST 0
3693 283 Wire nails. Specifications 1975 GOST 0
3694 21444 Coated paper. Specifications 1975 GOST 0
3695 21130 Electrical items. Earth terminals and earth signs. Design and dimensions 1975 GOST 0
3696 20450 "Fresh cowberries. Requirements for state purchases, deliveries and retail" 1975 GOST 0
3697 21023 Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing - 1975 GOST 0
Amendment 1: 03/1980; Amendment 2: 05/1982; Amendment 3: 08/1987; Amendment 4: 07/1992
3698 12.2.007.2 Occupation safety standards system. POWER TRANSFORMERS AND ELECTRICAL REACTORS - Amendment 1975 GOST 0
1:05/1983
3699 12.2.008 Labour safety standards system. Equipment and apparatus for gas-flaming processing of metals and for thermal dusting of 1975 GOST 0
coatings. Safety requirements
3700 11102 SWITCHES AND ACTUATORS FOR DIESEL REGULATING SYSTEMS Types, basic parameters and technical 1975 GOST 0
requirements - Incorporating Amendment 1: 12/1981 and Amendment 2: 12/1986
3701 21120 BARS AND BILLETS WITH CIRCULAR AND SQUARE CROSS-SECTION METHODS OF ULTRASONIC 1975 GOST 0
DEFECTOSCOPY
3702 12.3.005 Occupational safety standards system. Painting works. General safety requirements 1975 GOST 0
3703 550 Seamless steel tubes for petroleum processing and petrochemical industry. Specifications 1975 GOST 0
3704 10052 Metal covered electrodes for manual arc welding of high-alloyed steel with special properties. Types 1975 GOST 0
3705 10155 Manganin uninsulated wire. Specifications 1975 GOST 0
3706 8967 STEEL FITTINGS WITH STRAIGHT THREAD FOR PIPELINES P = 1.6 MPa. UNOIN NIPPLES Basic dimensions 1975 GOST 0
3707 12.3.008 Occupational safety standards system. Metal and non-metal inorganic coating. General safety requirements 1975 GOST 0
3708 263 RUBBER METHOD OF SHORE A HARDNESS DETERMINATION - (CMEA Standard 1198-78); Amd 1: 4/1980; Amd 1975 GOST 0
2: 2/1983; Amd 3: 11/ 1985; Amd 4: 6/1988
3709 11383 Thin-walled copper and brass tubes. Specifications 1975 GOST 0
3710 10160 Magnetically soft precision alloys Specifications - Incorporates Amendment 1: 7/1980; Amendment 2: 8/1988; Amendment 1975 GOST 0
3: 12/1985
3711 21253 Automatic filling machines and measuring and filling machines for liquid food products 1975 GOST 0
3712 20919 Canned small crab in natural juice. Specifications 1975 GOST 0
3713 5286 Drilling tool joints 1975 GOST 0
3714 21210 Core bits for core barrels. Types and main dimensions 1975 GOST 0
3715 21405 Fresh small-fruit alycha. Specifications 1975 GOST 0
3716 12.4.010 Occupational safety standards system. Personal safety means. Special mitten 1975 GOST 0
3717 631 Internal-external upset drill pipes with couplings. Specifications 1975 GOST 0
3718 8338 Single row radial ball bearings. Boundary dimensions 1975 GOST 0
3719 2974 Dressed hair rabbit skins. General specifications 1975 GOST 0
3720 20730 Nutrient media. Meat-pepton broth (for veterinary). Specifications 1975 GOST 0
3721 8962 DUCTILE IRON FITTINGS WITH PARALLEL THREAD FOR PIPELINES. CAPS BASIC DIMENSIONS - 1975 GOST 0
Incorporating Amendment No 1: 09/1980; Incorporating Amendment No 2: 03/1983
3722 6782.1 Coniferons sawn timber. Shrinkage value 1975 GOST 0
3723 21215 Oxide paper for electrical insulation. Specificaions 1975 GOST 0
3724 6619 SINGLE AND DOUBLE HORNED LAMELLAR HOOKS - Amendment 1: 09/1991 1975 GOST 0
3725 12.2.007.1 Occupation safety standards system. Rotating electric machines. Safety requirements 1975 GOST 0
3726 8966 STEEL FITTINGS WITH PARALLEL THREAD FOR PIPELINES P = 1.6 MPa. STRAIGHT PIPE COUPLINGS BASIC 1975 GOST 0
DIMENSIONS
3727 9567 Precision steel tubes. Range 1975 GOST 0
3728 3845 METAL PIPES HYDRAULIC PRESSURE TEST METHOD 1975 GOST 0
3729 10243 Steel. Methods of test and estimation of macrostructure 1975 GOST 0
3730 8943 Ductile iron and steel fittings with parallel thread for pipelines. Nomenclature 1975 GOST 0
3731 6782.2 Broadleaved sawn timber. Shrinkage value 1975 GOST 0
3732 20887 Medical equipment. Water stills. Terms and definitions 1975 GOST 0
3733 10373 AUTOMOBILE BENZINES FOR ENGINES DETONATION TEST METHODS - Amendment 1: 07/21/1986 1975 GOST 0
3734 8965 "Pipe steel connections with cylindrical thread for pipe-lines P=1,6 MPa. Specifications" 1975 GOST 0
3735 9200 Sevencontacted plug joints for automobiles and tractors 1975 GOST 0
3736 7871 Aluminium and aluminium alloys filler wire. Specifications 1975 GOST 0
3737 10555 Reagents and high-purity matters. Colorimetric methods for determination of iron content 1975 GOST 0
3738 7275 Adjustable wrenches. Specifications 1975 GOST 0
3739 8.145 STATE SYSTEM FOR GUARANTEEING THE UNIFORMITY OF MEASUREMENTS NATIONAL PRIMARY 1975 GOST 0
STANDARD AND ALL-UNION VERIFICATION CHART FOR INSTRUMENTATION MEASURING THE VOLUME
FLOWRATE OF A FLUID OVER THE RANGE 3‫·آ‬10-6‫·أ‬10 m3/s
3740 10151 "Fur stoles, capes for ladies. General specifications" 1975 GOST 0
3741 21122 Fresh apples of late ripening. Specifications 1975 GOST 0
3742 20440 GAS TURBINE PLANTS TEST METHODS - Incorporates Amendment 1: 08/1987 1975 GOST 0
3743 6658 "Articles of paper and cardboard. Packing, marking, transportation and storage" 1975 GOST 0
3744 9169 CLAY RAW MATERIALS FOR CERAMIC INDUSTRY CLASSIFICATION - Amendment 1:1985; Amendment 2:1991 1975 GOST 0
3745 10051 Metal covered electrodes for manual arc surfacing of upper layers with special properties. Types 1975 GOST 0
3746 6962 ELECTRIFIED TRANSPORT WITH CONTACT POWER SUPPLY SYSTEM VOLTAGE SERIES - Incorporates 1975 GOST 0
Amendment 1: 11/1991; Incorporated Corrigendum 2: 1992
3747 1821 Dressed fur-coat sheepskin. Specifications 1975 GOST 0
3748 606 Cottonseed meal. Specifications 1975 GOST 0
3749 11533 AUTOMATIC AND SEMI-AUTOMATIC SUBMERGED ARC WELDING, ACUTE AND OBTUSE WELD JOINTS, 1975 GOST 0
MAIN TYPES, DESIGN ELEMENTS AND DIMENSIONS
3750 20900 Copper tubing for waveguides and brass right angle tubes 1975 GOST 0
3751 3559 Steel strip for armouring cables. Specifications 1975 GOST 0
3752 8769 "External lighting equipment for autocars, tractors, trailers and motor-vehicles. Number, location, colour, visibility" 1975 GOST 0
3753 7417 Calibrated round steel. Dimensions 1975 GOST 0
3754 13200 Copper oxychloride 90% wettable powder. Specifications 1975 GOST 0
3755 21443 Liquefied hydrocarbon gases for export. Specifications 1975 GOST 0
3756 20995 STATIONARY STEAM GENERATORS WITH PRESSURE UP TO 3.9 MPa FEEDWATER AND STEAM QUALITY 1975 GOST 0
PARAMETERS - Amendment 1: 06/1981; Amendment 2: 06/1984; Amendment 3: 09/1986; Amendment 4: 07/1988
3757 9871 Glass mercury electric-contact thermometers and thermoregulators. Specifications 1975 GOST 0
3758 3262 WATER AND GAS-SUPPLY STEEL PIPES SPECIFICATIONS - Incorporates Amendments 1-5 1975 GOST 0
3759 6217 Wood crushed activated carbon. Specifications 1974 GOST 0
3760 19851 Cold-rolled steel cut strip. Specifications 1974 GOST 0
3761 6009 HOT-ROLLED STEEL BELT Specifications - Incorporates Amendment 1: 05/1985 1974 GOST 0
3762 7212 Cape chisels. Specifications 1974 GOST 0
3763 7069 "Fur collars, cuffs and trimmings. Specifications" 1974 GOST 0
3764 20072 Heat-resistant steel. Specifications 1974 GOST 0
3765 20083 Feedingstaffs yeast. Specifications 1974 GOST 0
3766 19855 Contact glass mercury thermometers. Specifications 1974 GOST 0
3767 9234 STEEL BENT SHEET SECTIONS WITH TRAPEZOID CORRUGATION - Incorporating Amendment 1: 04/85; 1974 GOST 0
Amendment 2: 12/88
3768 7403 Crab meat canned in natural juice. Specifications 1974 GOST 0
3769 19672 WORM MODULES AND DIAMETER COEFFICIENTS - Amendment 1: 06/1978; Amendment 2: 01/01/1991 1974 GOST 0
3770 8696 General-purpose electrically-welded spiral seam steel pipes. Specifications 1974 GOST 0
3771 7271 Post blank paper. Specifications 1974 GOST 0
3772 20245 Hydraulic valves. Acceptance and ethods of tests 1974 GOST 0
3773 10796 Arc-air hand torches. Types and basic parameters 1974 GOST 0
3774 19815 Life-Buoy. General technical requirements 1974 GOST 0
3775 19616 CLOTHS AND KNITTED FABRICS METHOD FOR EVALUATING THE ELECTRICAL SURFACE RESISTIVITY - 1974 GOST 0
Incorporating Amendment 1: September 1980; Amendment 2: August 1982; Amendment 3: November 1990; Amendment
4: May 2004
3776 19521 Welding of metals Classification 1974 GOST 0
3777 1049 Manganese nickel wire. Specifications 1974 GOST 0
3778 19351 Iridium and rhodium wire. Specifications 1974 GOST 0
3779 9296 Dyed dressed pure-bred karakul. Specifications 1974 GOST 0
3780 20243 Power transformers. Methods of short-circuit tests - Amendment 1: 02/1980; Amendment 2: 05/1985; Amentment 3: 1974 GOST 0
06/1987
3781 19922 Wood. Glued and bent blanks. Method of determining ultimate strength of glue jointing between bosses and veneer in 1974 GOST 0
trapezoid frames of chairs
3782 19651 Diammonium phosphate for feeding. Specifications 1974 GOST 0
3783 17464 SWITCH PRODUCTS KEY PARAMETERS 1974 GOST 0
3784 14034 Centre holes. Dimensions - Amendment 1: 12/1978; Amendment 2: 04/1981 1974 GOST 0
3785 7428 "Amplifying, ractifying and transmitting tubes of anode dissipated power to 25 W and vacuum display tubes for wide 1974 GOST 0
aplication designs. General specifications"
3786 3339 Woven-wire sieve for grain. Specifications 1974 GOST 0
3787 3595 Coloured dressed pure-bred karakul. Specifications 1974 GOST 0
3788 3110 Steel spoke wire. Specifications 1974 GOST 0
3789 8411 CLAY DRAIN PIPES. SPECIFICATIONS 1974 GOST 0
3790 19530 SEALING DEVICES OF SCREW JOINTS WITH ROUND CROSS-SECTION RUBBER RINGS. SCREW PART - 1974 GOST 0
Incoporated Amendment 1: 10/1980 and Amendment 2: 09/1985
3791 11106 "Musk-rat skins, dressed. Specifications" 1974 GOST 0
3792 8731 Seamless Hot-Rolled Steel Pipes Technical Requirements - Incorporated Amendments 2: 4/1976; 3: 3/1980; 4: 1/1982; 5: 1974 GOST 0
3/1984
3793 10524 Terry linen and half-linen fabrics and piece articles. General specification 1974 GOST 0
3794 20352 Salted delicacy caviar. Specifications 1974 GOST 0
3795 19425 SPECIAL-PURPOSE STEEL FLANGE BEAMS AND CHANNELS ASSORTMENT - Amendment 1: 11/1977; 1974 GOST 0
Amendment 2: 06/1985
3796 19906 Sodium nitrite for industrial use. Specifications 1974 GOST 0
3797 19746 Wire from silver solders. Specifications 1974 GOST 0
3798 11070 Primary aluminium ingots. Specifications - Amendment 1: 08/1975; Amendment 2: 01/1980; Amendment 3: 10/1984; 1974 GOST 0
Amendment 4: 05/1987; Amendment 5: 09/1988; Amendment 6: 03/1992
3799 19747 Transportation of explosive in containers. General requirements 1974 GOST 0
3800 3193 Platinum alloy catalytic gauzes. Specifications 1974 GOST 0
3801 32 Turbine oils. Specifications 1974 GOST 0
3802 5385 Laminated round rods (fabric base) for electrical purposes. Specifications 1974 GOST 0
3803 5716 Phosphorite powder. Spesifications 1974 GOST 0
3804 8.127 State system for guaranteeing the uniformity of measurements SHOCK MOTION PARAMETERS MEASUREMENT 1974 GOST 0
Terms and definitions
3805 12.4.004 System of safety engineering. Filter-gas-respirators PPG-67. Specifications 1974 GOST 0
3806 19493 Alkali-proof paper for mercury-zinc cells. Specifications 1974 GOST 0
3807 18404.3 PE insulated PVC sheathed control cables. Specifications 1973 GOST 0
3808 19006 FUEL FOR ENGINES METHOD FOR DETERMINATION OF FILTERABILITY FACTOR - Incorporating Amendment 1973 GOST 0
1: 05/1979, Amendment 2: 12/1984
3809 18986.8 Semiconductor diodes. Method for measuring reverse recovery time 1973 GOST 0
3810 4133 Joint bars for rails of gauge railway. Technical requirements 1973 GOST 0
3811 19326 SPIRAL BEVEL GEARINGS Geometry Calculation 1973 GOST 0
3812 18981 Pipe toggle wrenches. Specifications 1973 GOST 0
3813 19344 Catalogue and card index paper. Specifications 1973 GOST 0
3814 7480 Polygraphic wire. Specifications 1973 GOST 0
3815 6286 High-pressure rubber hoses with metal braids without fittings. Specifications 1973 GOST 0
3816 18404.2 PE insulated rubber sheathed control cables. Specifications 1973 GOST 0
3817 19341 Canned fish. Fish liver with vegetables. Specifications 1973 GOST 0
3818 6861 Coloured writing paper. Specifications 1973 GOST 0
3819 18351 Magnesium alloy extruded rods. Specifications - Amendment 1: September 1978; Amendment 2: July 1983 1973 GOST 0
3820 10522 Jahobab skins. Specifications 1973 GOST 0
3821 1933 Calibrated board. Specifications 1973 GOST 0
3822 1051 Gauged bars. General specifications 1973 GOST 0
3823 7438 Paper for smoking. Specifications 1973 GOST 0
3824 19337 Grease VNII NP-274. Specifications 1973 GOST 0
3825 433 Rubber insulated cables for electric power 1973 GOST 0
3826 2.118 Unified system for design documentation. Technical proposal 1973 GOST 0
3827 18953 SSI electric power supply sources. General specifications 1973 GOST 0
3828 3560 Package steel strip. Specifications 1973 GOST 0
3829 597 Design paper. Specifications 1973 GOST 0
3830 18480 Relived woodworking cutters with rear teeth for rebating 1973 GOST 0
3831 18324 Source units of ionizing radiation for radioisotope instruments relay type. General specifications 1973 GOST 0
3832 10714 Dressed astrakhan. Specifications 1973 GOST 0
3833 18410 Power paper insulated cables. Specifications 1973 GOST 0
3834 19121 PETROLEUM PRODUCTS DETERMINATION OF SULFUR CONTENT BY LAMP METHOD - (CMEA Standard 1973 GOST 0
3361-81); Incorporating Amendment 1: 02/1979, Amendment 2: 04/1983, and Amendment 3: 06/1988
3835 10014 Bleached and white groundwood 1973 GOST 0
3836 18589 Dry living antibrucellosis vaccine for domestic animals from stamm no. 19. Specifications 1973 GOST 0
3837 19215 "Cranberry fresh. Requirements for state purchases, deliveries and retail" 1973 GOST 0
3838 1861 Compressor oils. Specifications 1973 GOST 0
3839 1668 Steel zinc-coated wire for aerial lines. Specifications 1973 GOST 0
3840 8773 GREASE TSCIATIM-203 Specifications - Incorporating Amendment 1: 06/78; Amendment 2: 08/79; Amendment 3: 1973 GOST 0
07/83; Amendment 4: 12/86; Amendment 5
3841 8989 Hempseed oil. Specification 1973 GOST 0
3842 18907 Cold worked and heat treated grinded rods of high-alloy and corrosion-proof steel. Specifications 1973 GOST 0
3843 7511 STEEL PROFILES FOR WINDOW AND LANTERN CASEMENTS AND WINDOW PANELS OF INDUSTRIAL 1973 GOST 0
BUILDINGS - Amendment 1:1984; Amendment 2:1989; Amendment 3:1990
3844 2765 Curried dog skins. Specifications 1973 GOST 0
3845 13267 ROTATING ELECTRIC MACHINES AND NONELECTRIC MACHINES DIRECTLY CONNECTED WITH THEM 1973 GOST 0
SHAFT HEIGHTS AND CONTROL METHODS - Incorporates Amendments 1: 1/1983 and 2: 10/1984; Incorporates
Corrigendum 4: 1982 and 1: 1985; CMEA Standard 4435-83
3846 8714 Fish and marine mammals food fat. Specifications 1972 GOST 0
3847 17931 MACHINE TAPS WITH TRUNCATED FLUTES DESIGN AND DIMENSIONS - Incorporates Amendment 1: 1973, 1972 GOST 0
Amendment 2: 1980, and Amendment 3: 1989
3848 17930 Machine taps with shortened flutes for machining of light alloys processing. Design and dimensions - Amendment 1: June 1972 GOST 0
1973; Amendment 2: December 1980; Amentment 3: September 1989
3849 6803 "Dressed skins of silver, platinum and snow foxes. Specifications" 1972 GOST 0
3850 17707 Canned meat. Minced becon. Specifications 1972 GOST 0
3851 7214 Punches. Specifications 1972 GOST 0
3852 876 Cartridge paper. Specifications 1972 GOST 0
3853 18271 Ground wheat grist. Specifications 1972 GOST 0
3854 18077 Canned fruite sauces. Specifications 1972 GOST 0
3855 11850 Steel wire for spring washers. Specifications 1972 GOST 0
3856 17439 Adjustable pliers. Specifications 1972 GOST 0
3857 17932 MACHINE TAPS WITH SCREW FLUTES FOR PROCESSING OF LIGHT ALLOYS Design and Dimensions - 1972 GOST 0
Amendment 1: June 1973; Amendment 2: August 1980; Amentment 3: September 1989
3858 18221 Mixed full-ration feeds for poultry. Specifications 1972 GOST 0
3859 18143 High-alloy corrosion-resistant and heat-resistant steel wire. Specifications 1972 GOST 0
3860 17617 Polyvinylchloride plastic bands. Specifications 1972 GOST 0
3861 17637 Glucose-chelate-citrate-sulfphate medium for boar sperm conservation 1972 GOST 0
3862 7213 Centre-punches. Specifications 1972 GOST 0
3863 10.69 Salted cod klipfisk. Specifications for export products 1972 GOST 0
3864 17515 Hookup plastic insulated wires. Specifications 1972 GOST 0
3865 9265 Mixed feeds-concentrates for draught-horses. Specifications 1972 GOST 0
3866 18136 OILS METHOD FOR DETERMINATION OF OXIDATION STABILITY IN MULTIPURPOSE APPARATUS - CMEA 1972 GOST 0
Standard 3657-82; Amendment 1:1981; Amendment 2:1983; Amendment 3:1992
3867 17661 "Frosen tuna, sail-fish, mackerel, marline and swordfish. Specifications" 1972 GOST 0
3868 17412 ELECTROTECHNICAL ARTICLES DESIGNED FOR AREAS WITH COLD CLIMATE GENERAL 1972 GOST 0
SPECIFICATIONS - Incorporates Amendment 1: 3/1976; Amendment 2: 12/1979
3869 9850 Zink-coated steel core wire for conductors. Specifications 1972 GOST 0
3870 12081 CONICAL SHAFT ENDS WITH 1:10 TAPER BASIC DIMENSIONS, PERMISSIBLE TORQUES - Incorporates 1972 GOST 0
Amendments 1: 1/1976 and 2: 11/1979 and 3: 6/1989; CMEA Standard 537-77
3871 5222 Silicon-manganese bronze wire. Specifications 1972 GOST 0
3872 17438 Combination pliers. Specifications 1972 GOST 0
3873 5.1215 METAL ARC WELDING ELECTRODES OF GRADE ‫_أ_أ_أ‬-4 FOR MILD STRUCTURAL STEELS QUALITY 1972 GOST 0
REQUIREMENTS FOR CERTIFIED PRODUCTS
3874 7090 Single-rotor hammer crushers. Specifications 1972 GOST 0
3875 3934 Aircraft wood. Inspection rules and control methods - Includes Amendment 1: 1989 1971 GOST 0
3876 9639 SHEETS MADE FROM UNPLASTICIZED POLYVINYLCHLORIDE (Sheet Vinyplast) SPECIFICATIONS - 1971 GOST 0
Incorporates Amendment 1: 07/1974, Amendment 2: 05/1979, Amendment 3: 01/1984, Amendment 4: 1985, Amendment
5: 06/27/1988
3877 10322 Dressed skins of mink. Specifications 1971 GOST 0
3878 4041 Rolled plates of high quality structural steel for cold stamping. Specifications 1971 GOST 0
3879 17269 Combination chemical cartridge and mechanical filter respirators RU-60m and RU-60mu. Specifications 1971 GOST 0
3880 1133 ROUND AND SQUARE FORGED STEEL. Assortment 1971 GOST 0
3881 17290 Castor plant ground oil-cake as livestock feed. Specifications 1971 GOST 0
3882 17405 Qlanders antigen for use in the complement fixation test. Specifications 1971 GOST 0
3883 16867 "Veal meat, carcasses and semi-carcasses. Specifications" 1971 GOST 0
3884 17256 Hempseed ground oil-cake. Specifications 1971 GOST 0
3885 17032 HORIZONTAL STEEL TANKS FOR OIL PRODUCTS Types and Basic Dimensions 1971 GOST 0
3886 7694 Canned sweet fruit and berry pickles. Specifications 1971 GOST 0
3887 1683 Dried vegetable mixes for first dishes. Specifications 1971 GOST 0
3888 16955 Mixed feed for control fattening of pigs. Specifications 1971 GOST 0
3889 16830 Almond nuts. Specifications 1971 GOST 0
3890 4762 Silico-calcium. Specifications 1971 GOST 0
3891 16831 Almond kernel. Specifications 1971 GOST 0
3892 16676 Canned fish. Fish soups. Specifications 1971 GOST 0
3893 16832 Persian walnuts. Specifications 1971 GOST 0
3894 16977 Medical elastic bandage. Specifications 1971 GOST 0
3895 16833 Kernel of persian walnut. Specifications 1971 GOST 0
3896 16079 Salted whitefishes (soregonidae). Specifications 1970 GOST 0
3897 15892 Tie zinc-coated steel wire for aerial lines. Specifications 1970 GOST 0
3898 808 Flattened steel strip for wound rollers. Specifications 1970 GOST 0
3899 16270 Fresh apples of early ripening. Specifications 1970 GOST 0
3900 7179 Dressed skins of polar fox. Specifications 1970 GOST 0
3901 16135 Steel wire for electronic computers. Specifications 1970 GOST 0
3902 16525 French chestnut 1970 GOST 0
3903 16080 Salted pacific salmon. Specifications 1970 GOST 0
3904 15598 Steel piano wire. Specifications 1970 GOST 0
3905 1207 Medical sterile bandages. Specifications 1970 GOST 0
3906 15169 "Canned meat. ""Heart"". Specifications" 1970 GOST 0
3907 16253 Chill moulds. Screwed core removers. Construction and dimensions 1970 GOST 0
3908 12375 Single rotor crusher for coarse grinding. Specifications 1970 GOST 0
3909 15990 Biological preparations. Concentrated aluminium-hydroxide formolized vaccine against erysipelas 1970 GOST 0
3910 7798 HEXAGON BOLTS OF ACCURACY CLASS B 1970 GOST 0
3911 3920 Tinned steel cable wire. Specifications 1970 GOST 0
3912 5531 European filbert 1970 GOST 0
3913 2526 THIN HEXAGON NUTS WITH DECREASED SIZE ACROSS FLATS OF ACCURACY CLASS A. Design and 1970 GOST 0
Dimensions
3914 15873 Elexible cellular plastics. Method of test for tensile properties 1970 GOST 0
3915 14781 "Skins of red fox, crossfox and kittfox dressed. Specifications" 1969 GOST 0
3916 14176 Corn flour. Specifications 1969 GOST 0
3917 896 PAINTWORK MATERIALS PHOTOELECTRIC METHOD FOR DETERMINATION OF COATINGS GLOSS 1969 GOST 0
3918 14746 "Medium, glucose-citrate-yolk, for keeping of bull sperm at temperature 2-5 C degree " 1969 GOST 0
3919 3157 Grey dressed non-dyed pure-breed karakul. Specifications 1969 GOST 0
3920 2071 Straps for fire-hoses 1969 GOST 0
3921 15037 Grease for impregnating the organic strandcore of wire rope. Specifications 1969 GOST 0
3922 14848 Ferroboron. Specifications 1969 GOST 0
3923 14202 PIPELINES OF INDUSTRIAL ENTERPRISES IDENTIFICATION COLORATION, WARNING SIGNS AND 1969 GOST 0
MARKING PLATES
3924 285 Barbed monobasic fluted wire. Specifications 1969 GOST 0
3925 14121 Buns for tea. Specifications 1969 GOST 0
3926 14032 Galete. Specifications 1968 GOST 0
3927 13657 Rye bread and rye-wheaten bread sterilized by spirit for short storage. Specifications 1968 GOST 0
3928 7981 Peanut oil. Specifications 1968 GOST 0
3929 7975 "Pumpkins food, fresh. Specifications" 1968 GOST 0
3930 2.101 Unified system for design documentation. Types of products 1968 GOST 0
3931 13468 Aircraft and helicopter connections for pour off fuel. Connection dimensions. Specifications 1968 GOST 0
3932 13838 Fine pitch involute gear cutters. Specifications 1968 GOST 0
3933 5640 STEEL METALLOGRAPHIC METHOD FOR EVALUATION OF SHEETS AND STRIPS MICROSTRUCTURE 1968 GOST 0
3934 13840 Reinforced steel ropes 1x7. Specifications 1968 GOST 0
3935 13646 "Glass thermometers, mercury for precision measuring. Specifications" 1968 GOST 0
3936 2.747 Unified system for design documentation. Graphic identifications in schemes. Dimensions of graphical symbols 1968 GOST 0
3937 13686 "Large sized fat chum slightly salt cured (""semuzhnaya""). Specifications" 1968 GOST 0
3938 13865 Canned fish in natural juice with oil added. Specifications 1968 GOST 0
3939 8642 Oval steel tubes. Range 1968 GOST 0
3940 938.5 LEATHER Method for determination of the content of substances, extracted by organic solvents - Incorporates 1968 GOST 0
Amendment 1: 08/1981, Amendment 2: 11/22/1991
3941 13908 Fresh sweet pepper. Specifications 1968 GOST 0
3942 8644 Flat-sided oval steel tubes. Range 1968 GOST 0
3943 8645 Rectangular steel tubes. Range 1968 GOST 0
3944 8646 Empty-ribbed steel tubes. Range of sizes 1968 GOST 0
3945 6201 Shelled peas. Specifications 1968 GOST 0
3946 12969 Plates for machines and devices. Technical requirements 1967 GOST 0
3947 12804 Dressed ermine and weasel skins. Specifications 1967 GOST 0
3948 12584 Long loaves sterilized by spirit for prolonged storage. Specifications 1967 GOST 0
3949 792 Low-carbon wire of quality. Specifications 1967 GOST 0
3950 1791 Nickel and copper-nickel alloys wire for extension leads for thermoelectric temperature transducers. Specifications 1967 GOST 0
3951 12583 Rye bread prepared by stepped heat sterilization for prolonged storage. Specifications 1967 GOST 0
3952 12582 Common rye bread sterilized by spirit for prolonged storage. Specifications 1967 GOST 0
3953 12780 Dressed squirrel skins. Specifications 1967 GOST 0
3954 12581 "Kolinsky and solongoi skins dressed, natural and dyed. Specifications" 1967 GOST 0
3955 13304 Dressed otter skins. Specifications 1967 GOST 0
3956 13197 Cold-smoked balyk products of Baltic salmon. Specifications 1967 GOST 0
3957 12971 Restangular plates for machines and devices. Dimensions - Amendment 1: 09, 1983; Amendment 2: 04,1986 1967 GOST 0
3958 13031 Dried chicory for export. Specifications 1967 GOST 0
3959 938.1 LEATHER Method of moisture content determination - Incorporates Amendment 1: 12/1985 1967 GOST 0
3960 12056 "Dressed skins of snow leopard, leopard lynx, tiger and wild cat, natural or dyed. Specifications" 1966 GOST 0
3961 12187 "Canned meat. Sausage, vetchinnorublenaya. Specifications" 1966 GOST 0
3962 12306 SOFT GLASSY WHEAT FLOUR FOR MACARONI SPECIFICATIONS - Amendment 1: 09/1983; Amendment 2: 1966 GOST 0
06/1986
3963 12438 Dressed sable skins. Specifications 1966 GOST 0
3964 7170 Wheat rye pran. Specifications 1966 GOST 0
3965 11694 Hempseed cake. Specifications 1966 GOST 0
3966 11806 Dressed fetch skins. Specifications 1966 GOST 0
3967 7169 Wheat pran. Specifications 1966 GOST 0
3968 12296 Canned meat. Sausage. Otdelnaya. Specifications 1966 GOST 0
3969 7445 Hot smoked sturgeons. Specifications 1966 GOST 0
3970 12297 "Canned meat. Sausage, lubitelskay. Specifications" 1966 GOST 0
3971 12425 Canned meat. Lvovsky pasty. Specifications 1966 GOST 0
3972 7444 Dry cured and cold smoked balyk products prepared from white salmon and siberial white salmon. Specifications 1965 GOST 0
3973 11202 Yellow rocket cake. Specifications 1965 GOST 0
3974 8687 "Canned meat with peas, beans or lentil. Specifications" 1965 GOST 0
3975 2477 OIL AND OIL PRODUCTS METHOD OF WATER CONTENT DETERMINATION - CMEA Standard 2382-80; 1965 GOST 0
Amendment 1: 04/1982; Amendment 2: 03/1989; Amendment 3: 07/01/2002
3976 11201 The peanut cake food. Specificatios 1965 GOST 0
3977 11298 Smoke-dry salmon-fish. Specifications 1965 GOST 0
3978 11203 Sesame cake. Specifications 1965 GOST 0
3979 10766 Coconut oil. Specifications 1964 GOST 0
3980 11049 Maize meal. Specifications 1964 GOST 0
3981 10008 Canned meat. Boiled pork in its own juice. Specifications 1962 GOST 0
3982 7713 Tolerances and Fits Basic Definitions - Incorporates Amendments 2: 5/70; 3: 7/80 1962 GOST 0
3983 10149 Canned meat fat pork. Specifications 1962 GOST 0
3984 9870 Galvanized wire nails for asbestos cement roofing. Specifications 1961 GOST 0
3985 9903 Rye cakes. Specifications 1961 GOST 0
3986 9906 Leningrad small loaf. Specifications 1961 GOST 0
3987 9685 Coniferous timber blanks. Specifications 1961 GOST 0
3988 9831 Rich bread in wrapping. Specifications 1961 GOST 0
3989 9712 High-caloric buns. Specifications 1961 GOST 0
3990 276 "Wheat groats (Poltavskaya, ""Artek""). Specifications" 1960 GOST 0
3991 9432 Automobile grease. Specifications 1960 GOST 0
3992 8990 Benne oil (sesame) 1959 GOST 0
3993 8638 Steel tubes. Range 1957 GOST 0
3994 4814 Frozen meat blocks. Specifications 1957 GOST 0
3995 7909 Drill prospecting pipes and sockets for them. Specifications 1956 GOST 0
3996 7990 Canned meat. Kidneys in tomato sauce. Specifications 1956 GOST 0
3997 1935 Mutton and goat carcass meat. Specifications 1955 GOST 0
3998 779 Beef. Halves and quarters of cow‫_آ‬s carcass. Specifications 1955 GOST 0
3999 7173 Railway rails type R43 for industrial conveyance and hoisting lines. Construction and dimensions 1954 GOST 0

Hercules Ebooks Institute

www.herculesebooks.com [email protected] +989141908737