Product Information
SILKOLENE COMP 4 XP RANGE
Extr eme Per fo r man ce Semi -Sy n th eti c Ester En g i n e oi l s
Description Advantages
One product range suitable for all high
The SILKOLENE COMP 4 XP range of
motorcycle engines oils are designed using XP performance 4-stroke motorcycle
Technology for high performance On and Off- engines On-Road and Off-Road
Road 4 stroke motorcycle engines.
XP Technology uses an innovative highly shear Superior shear stability produces “stay
stable, low volatility base oil formulation along in grade” synthetic ester containing
with stable esters to achieve increased power, multigrade engine oils
provide ultimate engine and transmission
protection, reduce oil consumption and improve Provides a high degree of anti-wear
fuel economy even under race conditions. XP
Technology combats engine wear and reduces performance for stressed components
friction on all critical load surfaces at both high
temperature operation and on cold starts. Provides enhanced high temperature
deposit control resulting in a cleaner
Application engine and thus promoting longer
engine life and performance retention
Formulated to meet the needs of both air and
water-cooled 4-Stroke engines the SILKOLENE Suitable for gearboxes and
COMP range comes in four grades and is transmissions where engine oil
suitable for 4-Stroke engines fitted to both On- technology is specified providing good
Road and Off-Road motorcycles.
pitting protection
SILKOLENE COMP 4 10W-30 XP
Balanced frictional properties give
SILKOLENE COMP 4 10W-40 XP
precise clutch control / operation
SILKOLENE COMP 4 15W-50 XP
SILKOLENE COMP 4 20W-50 XP Also provides good corrosion protection,
better oxidation/ nitration resistanceand
Specifications / Approvals lower volatility than conventional
• JASO MA2 products
• API SN Performance
PMA 01.08.2023 Page 1
PT. FUCHS INDONESIA Phone +62 21-893-4960 ISO 9001:2008
Jl.Jababeka VI SFB Blok J6KL Fax +62 21-893-5277 ISO 14001:2004
Cikarang Industrial Estate Bekasi
[email protected] OHSAS 18001:2007
Bekasi 17530
Product Information
TYPICAL CHARACTERISTICS
SILKOLENE COMP 4 Test Method Unit 10W-30 XP 10W-40 XP 15W-50 XP 20W-50 XP
Appearance Amber Amber Amber Amber
SAE Rating 10W-30 10W-40 15W-50 20W-50
Specific Gravity at 15ºC IP160 0.864 0.866 0.875 0.881
Kinematic Viscosity@ 40ºC IP71 mm2/s 73.5 103.6 134.2 156.9
Kinematic Viscosity @ 100ºC IP71 mm2/s 11.6 15.5 18.3 19.0
Viscosity Index (VI) IP226 152 158 153 138
Cold Crank Viscosity ASTM D5293
20W at -15°C cP 5505
15W at -20°C cP 5406
10W at -25°C cP 4668 5704
Flash point IP 34 ºC 215 212 212 220
Pour point IP15 ºC -36 -36 -39 -28
PMA 01.08.2023 Page 2
PT. FUCHS INDONESIA Phone +62 21-893-4960 ISO 9001:2008
Jl.Jababeka VI SFB Blok J6KL Fax +62 21-893-5277 ISO 14001:2004
Cikarang Industrial Estate Bekasi
[email protected] OHSAS 18001:2007
Bekasi 17530
Product Information
The information contained in this product information sheet is based on experience and know-how of PT FUCHS
INDONESIA. in the development and manufacturing of lubricants and represents the current state-of-the-art
technology. The performance of our products can be influenced by series of factors, especially the specific use,
the method of application, the operational environment, component pre-treatment, possible external
contamination etc. Our products must not be used in aircrafts/spacecrafts or their components, unless such
products are removed before the components are assembled into the aircraft/spacecraft. For this reason,
universally valid statements about the function of our products are not possible. The information given in this
product information sheet represents general, non-binding guidelines. No warranty expressed or implied is given
concerning the properties of the product or its suitability for any given application.
We therefore recommend that you consult our application engineer to discuss the application conditions and
performance criteria of the products before the product is used. It is the responsibility of the user to test the
functional suitability of the product and to use it with the corresponding care.
Our products undergo continuous improvement. We therefore retain the right to change our product program,
the products and their manufacturing processes as well as all details of our product information sheets at any
time without warning. With the publication of this product information sheet, all previous editions cease to be
valid.
Any form of reproduction requires prior written permission from PT FUCHS INDONESIA.
PMA 01.08.2023 Page 3
PT. FUCHS INDONESIA Phone +62 21-893-4960 ISO 9001:2008
Jl.Jababeka VI SFB Blok J6KL Fax +62 21-893-5277 ISO 14001:2004
Cikarang Industrial Estate Bekasi
[email protected] OHSAS 18001:2007
Bekasi 17530
