Chemical Analysis Reports

CHEMICAL ANALYSIS TEST REPORT FOR AGGREGATE
Client : Factory of Saleh Abdullah & Hussain A.Alibrahim Co (SAHACO)

Project Name : King Salman Energy Park (SPARK)
Sample No. : OKS-24-1883 Report No : OKS-24-1883-T1
Source of sample : SAHACO Batching Plant Lab Project No. : PK22-153
Sample Description : 3/4" Aggregate Date of Sampling : 01 Feb 2024
Sampling Method : -- Date Sample Received : 03 Feb 2024
Sampled by : Mazhar H (CTTA#1640) Date Test Started : 06 Feb 2024
Tested by : Raneesh A Date Test Completed : 08 Feb 2024
RFI No. : SH-ISF-C-11187-2 Date Reported : 10 Feb 2024
Location : SAHACO Batching Plant
EPM# : 1405687181
Parameters Tested Method Results
Coal & Lignite (%) ASTM C123/C123M-14 NIL
Chert (%) ASTM C123/C123M-14 NIL
Method Variation : NIL

Remarks : NIL
Mr. Raneesh Ahammed,Chemist Mr. Riyas Jamaludhin,Lab Manager, (CTTA#222)

Reviewed by Approved by
P.O Box 1736, Al-Khobar 31952, K.S.A; Document No. Revision No. Effective Date Page Sequence
Tel. 8573664/8573668/8573880, Fax. 8573144,
e-mail: [email protected] TF-CH-04 04 16-01-2022 1 of 1
An Independent Testing Laboratory This is a digitally generated report does not require stamp/signature
Results related only to the items tested.

Sample Description : 3/8" Aggregate Date of Sampling : 01 Feb 2024
EPM# : 1405687181

Remarks : NIL

Tel. 8573664/8573668/8573880, Fax. 8573144,

Sample Description : Sand Date of Sampling : 01 Feb 2024
EPM# : 1405687181

Remarks : NIL

Tel. 8573664/8573668/8573880, Fax. 8573144,
CHEMICAL ANALYSIS TEST REPORT FOR CONCRETE MIXING WATER

Source of sample : RO Plant Lab Project No. : PK22-153
Sample Description : Water Date of Sampling : 01 Feb 2024
EPM# : 1405687181
Maximum Limit as per
Sl No. Test Description Test Method Test Results
09-SAMSS-097
1 Chloride as Cl-, ppm ASTM D-512 22 500 *
2 Chloride as Cl-, ppm ASTM D-512 22 1000 **
3 Sulfate as SO42-, ppm ASTM D-516 <5 3000
4 Total Solids by mass, ppm ASTM C-1603 72 5000
5 pH Value ASTM D-1293 7.1 6.0-8.0
6 Alkalies as (Na2O+0.658K2O), ppm APHA AWWA WEF-3120B 12 600
Reference Specification : ASTM C 1602,Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete.
Remarks : Based on the above Parametric analysis, this Source of Water meet the requirement for Mixing Water as Per 09-SAMSS-097, Part
5.4 Table B, 2019 Edition and ASTM C 1602,Standard Specification for Mixing Water Used in the Production of Hydraulic
Cement Concrete. This Mixing Water is Visually Clear and free from Oil, acid, Organic Matter and Other deterious Substances.
*In Pre-stressed Concrete

**In Reinforced Concrete

Tel. 8573664/8573668/8573880, Fax. 8573144,
Results related only to the items tested. These Tests Acrredited by ISO/IEC 17025
CHEMICAL ANALYSIS TEST REPORT FOR CONCRETE MIXING WATER

Source of sample : Chiller Lab Project No. : PK22-153
Sample Description : Water (Chiller Water) Date of Sampling : 01 Feb 2024
EPM# : 1405687181
Maximum Limit as per
Sl No. Test Description Test Method Test Results
09-SAMSS-097
1 Chloride as Cl-, ppm ASTM D-512 27 500 *
2 Chloride as Cl-, ppm ASTM D-512 27 1000 **
3 Sulfate as SO42-, ppm ASTM D-516 <5 3000
4 Total Solids by mass, ppm ASTM C-1603 76 5000
5 pH Value ASTM D-1293 7.1 6.0-8.0
6 Alkalies as (Na2O+0.658K2O), ppm APHA AWWA WEF-3120B 14 600
Reference Specification : ASTM C 1602,Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete.
Remarks : Based on the above Parametric analysis, this Source of Water meet the requirement for Mixing Water as Per 09-SAMSS-097, Part
5.4 Table B, 2019 Edition and ASTM C 1602,Standard Specification for Mixing Water Used in the Production of Hydraulic
Cement Concrete. This Mixing Water is Visually Clear and free from Oil, acid, Organic Matter and Other deterious Substances.
*In Pre-stressed Concrete

**In Reinforced Concrete

Tel. 8573664/8573668/8573880, Fax. 8573144,
Results related only to the items tested. These Tests Acrredited by ISO/IEC 17025
CHEMICAL ANALYSIS REPORT FOR FLY ASH
Sample Description : Fly Ash Date of Sampling : 01 Feb 2024
EPM# : 1405687181
Parameters Tested Unit Results
Silicon dioxide, SiO2 wt.% 47.41

Aluminum oxide, Al2O3 wt.% 19.17
Iron oxide, Fe2O3 wt.% 5.37
Calcium oxide, CaO wt.% 1.35
Magnesium oxide, MgO wt.% 0.74
Sulphur trioxide, SO3 wt.% 0.85
Sodium oxide, Na2O wt.% <0.01
Potassium oxide, K2O wt.% 0.45
Zinc Oxide, ZnO wt.% 0.04
Strontium Oxide, SrO wt.% 0.11
0
Moisture Content at 105 C wt.% 0.78
Loss on Ignition at 9500C, LOI wt.% 1.28
Test Method: ASTM C 311, ASTM C 114, ASTM C 618

Remarks:

Tel. 8573664/8573668/8573880, Fax. 8573144,
CHEMICAL ANALYSIS REPORT FOR MICROSILICA

Sample Description : Microsilica Date of Sampling : 01 Feb 2024
EPM# : 1405687181
Loss on Ignition at 7500C, LOI wt.% 1.22
Moisture Content wt.% 0.78

Tel. 8573664/8573668/8573880, Fax. 8573144,
CHEMICAL ANALYSIS REPORT FOR PODZOLIC POWDER
Sample Description : Podzolic Powder Date of Sampling : 01 Feb 2024
EPM# : 1405687181

0
Loss on Ignition at 950 C, LOI wt.% 24.02

Remarks:

Tel. 8573664/8573668/8573880, Fax. 8573144,

Chemical Analysis Reports

Uploaded by

Copyright:

Available Formats

Chemical Analysis Reports

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chemical Analysis Reports

Uploaded by

Copyright:

Available Formats

CHEMICAL ANALYSIS TEST REPORT FOR AGGREGATE

Client : Factory of Saleh Abdullah & Hussain A.Alibrahim Co (SAHACO)

Parameters Tested Method Results

Coal & Lignite (%) ASTM C123/C123M-14 NIL

Chert (%) ASTM C123/C123M-14 NIL

Method Variation : NIL

Mr. Raneesh Ahammed,Chemist Mr. Riyas Jamaludhin,Lab Manager, (CTTA#222)

Client : Factory of Saleh Abdullah & Hussain A.Alibrahim Co (SAHACO)

Parameters Tested Method Results

Coal & Lignite (%) ASTM C123/C123M-14 NIL

Chert (%) ASTM C123/C123M-14 NIL

Method Variation : NIL

Mr. Raneesh Ahammed,Chemist Mr. Riyas Jamaludhin,Lab Manager, (CTTA#222)

Client : Factory of Saleh Abdullah & Hussain A.Alibrahim Co (SAHACO)

Parameters Tested Method Results

Coal & Lignite (%) ASTM C123/C123M-14 NIL

Chert (%) ASTM C123/C123M-14 NIL

Method Variation : NIL

Mr. Raneesh Ahammed,Chemist Mr. Riyas Jamaludhin,Lab Manager, (CTTA#222)

Client : Factory of Saleh Abdullah & Hussain A.Alibrahim Co (SAHACO)

1 Chloride as Cl-, ppm ASTM D-512 22 500 *

2 Chloride as Cl-, ppm ASTM D-512 22 1000 **

3 Sulfate as SO42-, ppm ASTM D-516 <5 3000

4 Total Solids by mass, ppm ASTM C-1603 72 5000

5 pH Value ASTM D-1293 7.1 6.0-8.0

6 Alkalies as (Na2O+0.658K2O), ppm APHA AWWA WEF-3120B 12 600

*In Pre-stressed Concrete

Mr. Raneesh Ahammed,Chemist Mr. Riyas Jamaludhin,Lab Manager, (CTTA#222)

Client : Factory of Saleh Abdullah & Hussain A.Alibrahim Co (SAHACO)

1 Chloride as Cl-, ppm ASTM D-512 27 500 *

2 Chloride as Cl-, ppm ASTM D-512 27 1000 **

3 Sulfate as SO42-, ppm ASTM D-516 <5 3000

4 Total Solids by mass, ppm ASTM C-1603 76 5000

5 pH Value ASTM D-1293 7.1 6.0-8.0

6 Alkalies as (Na2O+0.658K2O), ppm APHA AWWA WEF-3120B 14 600

*In Pre-stressed Concrete

Mr. Raneesh Ahammed,Chemist Mr. Riyas Jamaludhin,Lab Manager, (CTTA#222)

Parameters Tested Unit Results

Silicon dioxide, SiO2 wt.% 47.41

Test Method: ASTM C 311, ASTM C 114, ASTM C 618

Mr. Raneesh Ahammed,Chemist Mr. Riyas Jamaludhin,Lab Manager, (CTTA#222)

Client : Factory of Saleh Abdullah & Hussain A.Alibrahim Co (SAHACO)

Parameters Tested Unit Results

Silicon dioxide, SiO2 wt.% 88.52

Aluminum oxide, Al2O3 wt.% 0.66

Iron oxide, Fe2O3 wt.% 0.26

Calcium oxide, CaO wt.% 0.88

Magnesium oxide, MgO wt.% 0.34

Sulphur trioxide, SO3 wt.% 1.22

Sodium oxide, Na2O wt.% <0.01

Potassium oxide, K2O wt.% 0.07

Zinc Oxide, ZnO wt.% 0.05

Strontium Oxide, SrO wt.% 0.17

Loss on Ignition at 7500C, LOI wt.% 1.22

Moisture Content wt.% 0.78

Test Method: ASTM C 311, ASTM C 114, ASTM C 1240

Mr. Raneesh Ahammed,Chemist Mr. Riyas Jamaludhin,Lab Manager, (CTTA#222)

Silicon dioxide, SiO2 wt.% 21.26

Test Method: ASTM C 311, ASTM C 114, ASTM C 618