ZM

201 SERIES

Indicators for daily

weighing tasks with
powerful built-in
applications.

Technical Specification

DESCRIPTION
ZM201 Series indicators are ideal for applications that require a basic weighing indicator for performing
Zero, Tare and Print functions. Their simple yet powerful design makes them the perfect choice for
connecting with bench, platform or floor scale and bin/tank/hopper (vessel) scales.

SPECIFICATIONS
GENERAL
Operating Applications General weighing, general weighing with accumulation, checkweighing, counting, peak
measurement, batching and remote display
Calibration Two to five points stored
Analog To Digital Measurement Rate 80 Hz
Unit Of Measure Two, configurable (pounds, kilograms, ounce, gram, pound/ounce, custom)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Programmable Selections Zero range, motion detection, automatic zero tracking, five point linearization
Time And Date Battery backed up time/date/year (12 hr or 24 hour format)
Internal Resolution 53,687,100 counts per mV/V per second
Digital Filtering Harmonizer filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port
ELECTRICAL
Power Requirements Line voltage: 90 VAC to 264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 150 mA at 12 VDC for one weight sensor and
180 mA at 12 VDC for four weight sensors
Excitation 5 VDC, short circuit protected
Supports up to four 350 ohm weight sensors
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
USER INTERFACE
Operational Keys Tare, Select, Zero, Print, Units, F1, On/Off (no keys on signal processor)
Status Annunciators Center of Zero, Motion, Gross, Net, Tare, Count, Print, Battery Status, Setpoint 1, Setpoint 2, Setpoint
3, Over/Under/Accept bar graph or fill bar graph, lb, kg, Preset Tare, Total,
(Custom unit of measure– lb/oz, ton, gram, configurable), Active Ethernet connection
Keypad 7 key chemical resistant polycarbonate
ZM201 SERIES Technical Specification

4.28 in 3.88 in
Display ABS: TN backlit 7-digit seven segment display with 1.2 in /108.7
30mmmm high digits 98.4 mm

Stainless steel: TN backlit 7-digit seven segment display with 0.5 in / 13 mm high digits
Panel mount: TN backlit 7-digit seven segment display with 0.5 in / 13 mm7.90high in
digits 2.875 in
Signal processor: No display 200.7 mm 73.0 mm

Displays have annunciators for status and mode identification

Display Rate Selectable (1, 2, 5, 10) times per second
INPUT/OUTPUT 4.28 in
108.7 mm
3.88 in
98.4 mm

Remote Inputs Three logic level inputs for Zero, Print, Tare, Units, or Select
Standard Outputs Three set point outputs, open collector design 7.90 in 2.11 in
200.7 mm 53.5 mm

Communications Two serial ports:

- Comm 1 RS232, no handshaking
- Comm 2 RS232, no handshaking
Ethernet: TCP/IP, DHCP, Static IP 4.28 in 3.88 in
Protocols (all ports): 108.7 mm 98.4 mm

- SMA Broadcast, Remote Display, and NCI

ZM201 Signal Processor Modbus/TCP 7.90 in 2.11 in
200.7 mm 53.5 mm
Circuitry Protection RFI, EMI and ESD protection
Panel Mount
PHYSICAL 5.78 in
146.8 mm

Operating Temperature Compliance with legal-for-trade requirements

Approval: 14° to 104° F / -10° to 40° C
at 10 to 90% relative humidity, non-condensing 6.50 in
Industrial: -4° to 140° F / -20° to 60° C 165.0 mm

at 10 to 90% relative humidity, non-condensing

30°
Enclosure Stainless steel: 304 brushed stainless steel IP66 with 60°

tilt stand/mounting bracket 9.65 in

245.0 mm
3.74 in 4.16 in .06 in
Plastic: ABS plastic IP20 with rubber feet 95.0 mm 105.6 mm 1.5 mm

Panel mount: Stainless steel panel mount IP66 ABS 4.01 in

101.8 mm

Weight ABS: 3.87 lb / 1.75 kg 9.63 in

Stainless steel: 7.34 lb / 3.32 kg 244.6 mm
8.25 in 3.55 in
Panel mount: 4.18 lb / 1.89 kg 209.6 mm 90.2 mm

Signal processor: 4.25 lb / 1.93 kg

Dimensions See drawings
6.5 in 0.50 in
APPROVALS 165.1 mm 12.70 mm
8.75 in
Patent US Patent 672,262 222.3 mm

Agencies NTEP (US) Class III/IIIL 10,000 d CC# 13-017 4.0 in

101.6 mm
OIML (European and UK) Class III 6,000 d
Measurement
Canada Approved
(R76/2006-GB1-13.02)
Measurement Canada AM-5902C† 8.43 in 5.0 in

Australia (NMI S655) 214.1 mm 127.0 mm

MID R61 Stainless Steel

New Zealand (2135)
CE †
Signal Processor
UL/cUL not approved by
EC Measurement Canada
OPTIONS More online
Battery Pack Internal NiMH rechargeable pack providing 18
hours operation on a single weight sensor www.averyweigh-tronix.com/zm201
system and 14 hours on a four weight sensor
system. Maximum charge time is five hours. ›› Technical
ZM-OPTO Provides setpoint interface specifications
Ethernet Watertight Gland Rubberized and sealed ›› User manuals
AC to DC Power In-Line AC to DC power module ›› News and
Pole Mounting Kit For ABS model information

www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
© Avery Weigh-Tronix group of companies 2013. All rights reserved. Avery Weigh-Tronix is a registered trademark of the Avery Weigh-Tronix group of
companies. This publication is issued to provide outline information only which, unless agreed by an Avery Weigh-Tronix group company in writing, may
not be regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print however, zm201_spec_UK_501114.indd
Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V2 AWT35-501114
RL5416
Compression Canister, Stainless Steel, IP69K

Specifications

LOAD CELLS
Full Scale Output:
2,0 mV/V
Output Resistance:
700 ohms, ± 3
Input Resistance:
800 ohms, ± 3
Material Finish:
Stainless steel
Compensated Temperature:
-10° C to 40° C
Operating Temperature: Picture is a representation of actual product
-10° C to 70° C
Seal Type:
IP69 K
Rated Excitation:
15 V
Insulation Resistance: Order Information
>5.000 megohms
LOAD RATING PART #
Cable Length:
15 m (40 ton version with 20 m) 10 t 168082
Cable Construction: 15 t 168083
PVC 20 t 168084
Cable Color Code: 25 t 168085
Red..........................+ Excitation
Black........................– Excitation 30 t 168087
Green.......................+ Signal 35 t 168088
White.......................– Signal 40 t 168089
Yellow......................+ Sense
Blue.........................– Sense 50 t 168090
Warranty: Note: Refer to page 233 for load cell mount information
Two-year limited warranty
Approvals:

www.ricelake.eu | Phone: +31 (0) 26 472 1319

C4 Optional
Class C4 available

Dimensions
RATED CAPACITY A B C D E F G H
mm
10-50t ø89 ø43.8 32 150 32 46.9 39.7 7.5

179
An ISO 9001 Registered Company. © 2017 Rice Lake Weighing Systems. Specifications subject to change without notice. Product pricing is available at: www.ricelake.eu
 JB8Q "JB8Q": EQUALISED JUNCTION BOX, WITH UP TO 8 LOAD CELLS

Junc on box fi ed with electronic board for

junc on and equalisa on of up to 8 load cells.
Par cularly suitable for weight bridges, thanks to
the Surger Arresters against electric discharges
and disturbances. Case suitable for harsh
environments, with metallic cable glands and
grounding. Terminal boards with a screw for
easing the connec on of the load cells and the
signal adjustment trimmer, for an accurate and
reliable equalisa on.

Working in coopera on with:

ALAA INTL. TRADING CO. FOR FOUNDATION EQUIPMENT (AFI) The best solu on
P.O. BOX 9998, ALKHALDIYA NORTH DISTRICT - 31423 - DAMMAM - SAUDI ARABIA for advanced industrial
Tel. +966 13 853 9000 Fax. +966 13 8539099
[email protected] applica ons
 TECHNICAL FEATURES

Reinforced polyester case in fiberglass, ideal for harsh environments.

8 + 1 PG11 waterproof metallic cable glands.
Surge Arresters against electric discharges and disturbances.
IP66 protection degree or IP68 with the use of GELBOX anti condensation gel (optional, you need 1200ml of gel).
Maximum input voltage: 24Vdc.
Maximum input current: 700mA.
Maximum input load cell signal: 1000mV.
Temperature effect: 50ppm/°C.
Compact dimensions (lxwxh): 220x120x90mm.
Removable terminals.

DETAIL 1

JB8Q: internal view.

 ALAA INTL. TRADING CO. FOR FOUNDATION EQUIPMENT
(AFI)
P.O. BOX 9998, ALKHALDIYA NORTH DISTRICT - 31423 - DAMMAM - SAUDI ARABIA

Tel. +966 13 853 9000 Fax. +966 13 8539099

[email protected]

SALES AND TECHNICAL ASSISTANCE SERVICE

All the specifications and images can be subject to variations and upgrades without prior notice.
 Hostile Environment Load Cell Cable

Standard Features
HARDWARE AND ACCESSORIES

90% Braided
Shield • EL146HE—four-wire load cell cable
PVC Jacket
• EL147HE—six-wire load cell cable
• Designed for use in hostile environments
• Polyurethane jacketing provides superior
Polyurethane
Foil Shield chemical and abrasion resistance
Jacket • RFI and EMI protected with foil overbraid shield
Four or six conductor • Unmatched durability, yet extremely flexible
polyurethane over 20
gauge wire • All conductors are industry-standard color coded
• The six-wire cable is best suited for longer runs
where remote sense lines can be used
• Use the four-wire cable for repairing or extending
existing cable
• Temperature rating: -22°F to 176°F
Part Number/Price (-30°C to 80°C)
• 500 V rating
Part # Continuous Roll Description Price
• Diameter—EL146HE: 0.28 in (7.1 mm); EL147HE:
15510 100 ft 30.5 m Four-conductor hostile environment cable Consult 0.32 in (8.1 mm)
15511 250 ft 76.2 m Four-conductor hostile environment cable Consult
15512 500 ft 152.4 m Four-conductor hostile environment cable Consult
15513 1,000 ft 304.8 m Four-conductor hostile environment cable Consult
15494 Custom Length Four-conductor hostile environment cable Consult/ft
15520 100 ft 30.5 m Six-conductor hostile environment cable Consult
15521 250 ft 76.2 m Six-conductor hostile environment cable Consult
15522 500 ft 152.4 m Six-conductor hostile environment cable Consult
15523 1,000 ft 304.8 m Six-conductor hostile environment cable Consult
15496 Custom Length Six-conductor hostile environment cable Consult/ft

Standard Load Cell Cable

www.ricelake.com | Phone: 800-472-6703

Standard Features
• EL146—four-wire load cell cable
• EL147—six-wire load cell cable
EL146
• 20 AWG tinned copper wire stranded for flexibility
• Braided shielding is encased in red PVC
• All conductors are industry-standard color coded
• The six-wire cable is best suited for longer runs
where remote sense lines can be used
• Use the four-wire cable for repairing or extending
existing cable
• Temperature rating: -22°F to 126°F
EL147
(-30°C to 80°C)
• Diameter—EL146: 0.25 in (6.4 mm); EL147:
0.29 in (7.4 mm)
Part Number/Price APPROVALS
Part # Continuous Roll Description Price
15505 100 ft 30.5 m Four-conductor cable Consult
15506 250 ft 76.2 m Four-conductor cable Consult
15507 500 ft 152.4 m Four-conductor cable Consult
15508 1000 ft 304.8 m Four-conductor cable Consult
15493 Custom Length Four-conductor cable Consult/ft
15515 100 ft 30.5 m Six-conductor cable Consult
15516 250 ft 76.2 m Six-conductor cable Consult
15517 500 ft 152.4 m Six-conductor cable Consult
15518 1000 ft 304.8 m Six-conductor cable Consult
394 15495 Custom Length Six-conductor cable Consult/ft

An ISO 9001 Registered Company © 2019 Rice Lake Weighing Systems 01/19 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.
 ONBRIDGE- SOFTWARE SPECIFICATION

Page 1 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
TABLE OF CONTENTS

1.0 PURPOSE AND SCOPE

This document describes the software features of [Onbridge]

RLWSIL provides complete weight and data management software for static scales. It enables the computer to
process vehicle weighing transactions, print tickets and reports, and share data with other systems.

Weighbridge Software will provide users with a weighing and computing system featuring extensive data
extraction, collection and processing functions. This Weighbridge software solution was designed to help the
customer to manage and track the critical information created at the time of weighing.

Collected data stored in daily files which could be used to produce weekly reports in the weighbridge office and
could also be accessed directly in the planning office.

Reports are designed to give all kinds of output as required. Reports can be made available for all the parameters
to give users an in-depth analysis of their business. Weighing software also has an option for exporting of reports
in different formats like Microsoft Excel, TEXT, CSV, PDF and XML.

Page 2 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
2.0 SYSTEM FEATURES

1. Versatile connectivity with the Weighbridge, Scales and Communication.

2. The Fastest and Easiest Menu Options and Screens.

3. Mouse only/ keyboard only/ mixed mode of data entry/touch screen.

4. Shortcut keys to accelerate data entry.

5. Supports code-based data entry. (Eg., Product Code, Supplier Code & Destination).

6. Multiple Weighments in a single Truck.

7. Real time CSV file output to interface with external systems.

8. All reports can be exported to Word/Excel/Pdf.

9. In-vehicles report to find out about the vehicles inside the premises.

10. Single screen operation for the weighbridge operator.

11. Customer sales graph.

Page 3 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 12. Configurable Tare difference alert and tare expiry.

13. Secure weighment, with configurable lock levels.

14. Supports multiple operators and super- users with different access privilege.

15. Multiple-weighbridge connectivity.

Page 4 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
2.1 VERSATILE CONNECTIVITY WITH WEIGHBRIDGE, SCALES AND COMMUNICATION.

The “OnBridge” software will have the facility to configure upto 4 nos. of Weighbridges (Scales)and connect any
weight Indicator with the required Baud rate, data bit, weight data start and end index. The screens shown below
illustrates the Weighbridge selection, Weighbridge Settings, Indicator Settings and Communication protocol
settings.

WeighbridgeSettings

The system will enquire whether the Scale1 is ACTIVE or not. Also, it will display the Weighbridge number which
can be changed as per the customer requirement, Units can be in Kilograms or in Tons, Capacity of the Scale also
needs to be entered.

Page 5 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Indicator Settings

The Indicators from the following list can be selected and interfaced with the Application Software. The weigh
module which will be a common function through which certain parameters are passed, to get the exact weight
data from the weighing electronics.

· 920i Indicator
· 720i Indicator
· 420i Indicator
· S460 Indicator
· Others

The weight can be receivedfrom the weight Indicator using 2 type of modes

a) Request Mode
b) Continuous dumping Mode.

a) Request Mode

The software will send the appropriate query to the weight Indicator to get the weight packet. On
successful receipt of the query the Indicator will send the weight to the PC. The PC will display a message
as “Indicator Communication OK” and the weight will be displayed.If the queries are not answered by the
Indicator, the PC after sending 4 or 5 request will display an error
message “Indicator Communication Not OK”

Page 6 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 b) Continuous Dumping

Parameters like Packet start position and the weight packet length are to be declared for successful
communication with the weight indicator. The software will wait for the weight packets and on successful
communication, it will display a message “Indicator Communication OK” and the weight will be displayed
else the system will wait for a time delay and display the message “Indicator Communication Not OK”

Communication Settings

In the communication setting module, system will display 2 options 1) RS232 and 2) TCP/IP. The following
parameters are to be set for the selection of RS232 to interface with the weighing electronics. The settings will
work both in Request Mode and in Continuous Dumping Mode.
1) Port Number
2) Baud Rate
3) Parity
4) Data Bits
5) Stop Bit

Port Number: The value selected earlier will be displayed. Use the arrow keys to select the Port Number
shown on the drop down list..

Baud Rate : The value selected earlier will be displayed. Use the arrow keys to set the Baud Rate to the other
values like 2400,4800,9600,19200,38400,57600,115200 from the drop down list.

Page 7 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 Parity : The value selected earlier will be displayed. Use the arrow keys to set the parity to the other values
"ODD" or "EVEN" or “None” from the drop down.

Data Bits : The possible options are 7 or 8. Select the required Word Length using the arrow keys from the
drop down.
Stopbit: The possible stop bits are 1 or 2. Select the required stop bit using the arrow keys from the list.

Communication Settings

Indicator Connected using Ethernet (TCP/IP)

The following parameters are enquired/displayed by the system in a “Communication Configuration Form”

Indicator’s IP Address : The value selected earlier will be displayed. Enter the IP address of the Indicator.

Local Port No.: The default value will be “10001”.

The above settings will work both in Request Mode and in Continuous Dumping Mode.

Page 8 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
2.2THE FASTEST AND EASIEST MENU OPTIONS AND SCREENS

The entire Application works with the concept of Menu and Data entry Screens which are faster and easier to
manure the Application.

The Main Menu shown overleaf will consists of the following Menu options.

a) Masters
b) Weighment
c) Reports
d) Data Management
e) Settings
f) Tools
g) Login &
h) Exit

To access the application, it is necessary to enter the correct User Id and User Password. On selection of the Login
Menu option the screen shown overleaf will be displayed, enquiring for the user Id and Password.

Page 9 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
On successful entry of the Login Id and Password all the menu Options will be enabaled for the user to operate.

Primarily, the system has to be configured as per the the customer requirement,for which the options like
“Settings” and “Tools” shall be used.

Page 10 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
The “Settings” Menu will consists of the following sub-options as shown below;

a) Scale Settings
b) Weighment Screen Settings
c) Mandatory & overrides Settings
d) Printer Settings
e) ERP/SAP File Settings
f) SERVER configuration

a) Scale Settings(Explained in Page no. 8 to 12 under section 2.1)

b) Weighment Settings

This is a configurable screen for selecting the appropriate fields to be displayed/entered on the
Weigment screen.Depending on the customer requirement the fields can be Enabled/Disabled by cliking
the Tick Box.The “Field Settings” screen consists of the following fields which are shown in the screen
overleaf:

The filed list consist of LR No. (Lorry Receipt Number), Transport Order No.,Supplier Order No.,

Delivery Order No., Gate Pass No., Product, Transporter (haulier), Customer/Supplier, Source/Destination,

Challan Qty, No. of Bags, Column1, Column2.

Weighment Type : Shipping / Receiving

Page 11 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 For displaying any default values during data entry in the columns shown below, enter the values in the

Product, Transporter, Customer and Source columns and Update.

Mandatory field settings

Page 12 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 c) Printer Settings

The system will enquire to select the Printer, showing the list of printers installed. Refer screen as
shown below;

d) ERP/SAP Setting

For SAP/ERP connectivity to the customer’s software the following File format are allowed. The Files settings
consists of the following File Type option

The File Location and the File name are configurable.By clicking the “change location” button, the File storing path
can be changed as desired.

Page 13 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
In addition to the above, the screen consists of the a) Refresh options b) File format and Layout Specification c)
Handling communication Errors and Alerts and d) Weigh stability settings which are self-explanatory.

e) Server Configuration

The Database Server can be selected from the LOCAL system or from the NETWORK. Select one of the setting to
interface with the SQL SERVER RDBMS.

Tools Menu

Primarily, the system has to be configured as per the the customer requirement, for which the options “Tools” is
also one the important one.

The “Tools” Menu consists of the following sub-options as shown below;

Page 14 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 a) User Creation
b) Change Password
c) Reset Ticket No.
d) Header / Footer
a) User Creation

This menu option provides the creation of User Login Details and Menu accessing rights for the User.
The Login details consists of the following entries which are to be filled by the User.
1) Login Name / ID
2) User Password
3) User Password hint
4) Group – (Supervisor / User / Operator)
5) User full name
6) User contact number
7) User Department
8) User Designation

The User Creation screen is shown overleaf to enter the above said details for an user which are mandatory.

Page 15 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 b) Change Password

Page 16 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
To change the Password for a User, the above said screen shall be used by entering the ‘Old Password’, ‘New
Password’ and finally the ‘Confirm Password’.

c) Reset Ticket No.

Page 17 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 d) Header / Footer

Page 18 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Master Tables

This Masters tables option is selected from the Main Menu using the arrow keys. A drop down will
be displayed as shown below. Using Up & Down arrow keys, move the cursor to the required
option & click the mouse to select the desired table. Sample screens are shown below and overleaf
which are self-explanatory to display the field entry and the grid view of the Master Tables.
Note : Product, Customer, Supplier, Transporter, Source / Destination, Driver, Vehicle Type,
Truck Masters are to be entered prior to start the Weigh Operation.

Page 19 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Product Master

Product Code : This text box is to enter the Product code which is a unique code.
Product Name : This text box is to enter the Product name.
Specification : This text box is to enter the specification of the Product.
Rate : This text box is to enter the rate of the Product.

Page 20 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Customer Master

Custmer Code : This text box is to enter the Customer code which is a unique code.
Customer Name : This text box is to enter the Customer name.
Address : This text box is to enter the address of the Customer.
Delivery Address : This text box is to enter the delivery address of the customer.
Contact Number : This text box is to enter the Contact Number.
Contact person : This text box is to enter the Contact Person name.
Fax : This text box is to enter the FAX number.
E-mail : This text box is to enter the E-mail address.
Remarks : This text box is to enter Remarks if any,

Page 21 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Supplier Master

Supplier Code : This text box is to enter the Supplier code which is a unique code.
Supplier Name : This text box is to enter the supplier name.
Address : This text box is to enter the address of the supplier.
Contact Number : This text box is to enter the Contact Number.
Contact person : This text box is to enter the Contact Person name.
Fax : This text box is to enter the FAX number.
E-mail : This text box is to enter the E-mail address.
Remarks : This text box is to enter Remarks if any,

Page 22 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Transporter Master

Transporter Code : This text box is to enter the transporter code which is a unique code.

Transporter Name : This text box is to enter the transporter name.

Address : This text box is to enter the address of the transporter.

Contact Number : This text box is to enter the Contact Number.

Contact person : This text box is to enter the Contact Person name.

Fax : This text box is to enter the FAX number.

E-mail : This text box is to enter the E-mail address.

Remarks : This text box is to enter Remarks if any,

Page 23 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Source / Destination

Code : This text box is to enter the source/destination code which is a unique code.
Name : This text box is to enter the Source / destination name.

Vehicle Type

Code : This text box is to enter the Vehicle code which is a unique code.
Type : This text box is to enter the Vehicle Type.

Page 24 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Driver

Driver Code : This text box is to enter the driver code which is a unique code.
Driver Name : This text box is to enter the driver name.
Address : This text box is to enter the address of the driver.
Contact Number : This text box is to enter the Contact Number.
License Number : This text box is to enter the License Number.
License Date : This text box is to enter the License Date.
Valid Upto : This text box is to enter the Valid up to.
Remarks : This text box is to enter Remarks if any,

Page 25 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Truck Master

Three shifts are envisaged as A, B and C, its time can be entered in the appropriate columns next to the shifts given
as A, B and C. After entering the time, press the Save button to record the timings.

Weighment

On selecting the Weighment option, the following weigh screen will be displayed to do the weighing operation.
The weighment is of 2 types, 1) Receiving and 2) Finished Goods.

Page 26 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
For Receiving the 1st weighment will be Gross and the 2nd weighment will be Tare whereas, for Finished goods the
1st weighment will be Tare and 2nd weighment will be Gross. For both Receiving and Finished Goods, the Truck
number, Date and Time will be the common fields but certain entries will get varied depending on the selection of
the Weighment type. Refer an empty data entry screen shown below for Receiving truck In addition, the
Incomplete Truck list and a Graph will be displayed on the screen.

EMPTY Data Screen of Shipping

The Receiving screen will enquire for the following details

a) Truck Number
b) Vehicle Type (Lorry,Tanker)
c) Weighment Type (Raw Material/Finished Goods)
d) Ticket number
e) Date & Time In - Date & Time Out
f) Transporter Order Number
g) Product Code and Name
h) Transporter Code and Name
i) Supplier Code and Name

Page 27 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 j) Driver Name
k) Source
l) Challan Number and Date
m) Challan Quantity
n) Gate Pass Number and Date
o) Column1& Column2
p) Remarks
q) Gross Weight, Tare Weight & Net Weight
r) Difference Weight (challan wt – net weight)

The Finished Goods screen will enquire for the following details

a) Truck Number
b) Vehicle Type (Lorry,Tanker)
c) Weighment Type (Raw Material/Finished Goods)
d) Ticket number
e) Date & Time In
f) Date & Time Out
g) Transporter Order Number
h) LR Number (Lorry Receipt Number)

Page 28 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 i) LR Date (Lorry Receipt Date)
j) Product Code and Name
k) Transporter Code and Name
l) Customer Code and Name
m) Driver Name
n) Destination
o) No. of Bags
p) Delivery Order Number and Date
q) Delivery Quantity
r) Gate Pass Number and Date
s) Column1
t) Column2
u) Remarks
v) Gross Weight
w) Tare Weight
x) Net Weight
y) Difference Weight (delivery quantity – net weight)

At the bottom of the weighment screen the above shown buttons will be displayed to access, confirm and print the
the weighment slip. Also, system will show the status of the weighment operation like Comport used, Device
Status, weighment status and the weighment mode.

Reports

This is the Reports dropdown menu consist of all type transaction reports.When you place the mouse on
the Reports menu it will display the submenu option.

Page 29 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 v Weighbill

v Date-wise Report - Consolidated Datewise Report can be viewed or printed.

Page 30 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 v Truck-wise Report - Truckwise Report can be viewed or printed.

v Truckwise Trip Summary – Truckwise trip summary report can be viewed or printed.

Page 31 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 v Customer / Supplier Report – Partywise Report can be viewed or printed.

Page 32 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 v Customer / Supplierwise trip Summary – Partywise trip summary can be viewed or printed.

v Productwise Report – Productwise report can be viewed or printed

v Productwise Trip Summary – Productwise Trip summary report can be viewed or printed.
Page 33 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 v Transporterwise report – Transporterwise report can be viewed or printed

v Transporterwise Trip Summary – Transporterwise trip summary can be viewed or printed.

Page 34 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 v Incomplete List - First weighment completed Trucks

Page 35 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 v Product Master List

v Party (Supplier/Customer) Master List

v Source / Destination List

Page 36 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
 v Transporter Master

Data Management

Page 37 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Modify transaction

Page 38 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Delete Pending Transaction

Page 39 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
Data Export

Backup Data

Delete Data

Page 40 of 40

This document and the information contained herein are proprietary property of RICE LAKE
WEIGHING SYSTEMS and may not be copied or used in any manner nor may any of the information in
or upon it be used for any purpose without the express written consent of RICE LAKE WEIGHING
SYSTEMS.
ON BRIDGE SOFTWARE

REPORTS
Alaa For Industries
Weighing Division
Dammam
ON BRIDGE SOFTWARE
LOG-IN PAGE
MAIN PAGE
MANUAL WEIGHMENT SCREEN
REPORT LIST
REPORT BY TRANSACTION (WEIGH BILL)
REPORT BY DATE
REPORT BY TRUCK
TRUCK SUMMARY REPORT
REPORT BY CUSTOMER/SUPPLIER
SUMMARY REPORT – CUSTOMER/SUPPLIER
REPORT BY PRODUCT
PRODUCT TRIP SUMMARY
REPORT BY TRANSPORTER
TRANSPORTER TRIP SUMMARY
REPORT BY DRIVER
REPORT BY SOURCE/ DESTINATION
INCOMPLETE TRANSACTION DETAILS (if any)
PRODUCT LIST
CUSTOMER/ SUPPLIER LIST
SOURCE/ DESTINATION LIST
TRANSPORTER LIST