We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2
J482 Instruments.qxp.
ps 1/2/02 6:23 PM Page 106
GAS MONITORS INSTRUMENTATION
A PAC III® Single Gas Monitor The PAC III® Single Gas Monitor uses interchangeable sensors to continuously measure levels of oxygen enrichment and deficiency or toxic gases, then compares those levels against values configured by the user. A bright alarm light and a 95 dB horn signal when those levels are exceeded. Each field-replaceable sensor’s memory stores vital, gas-specific information, including calibration data, sensitivities and zero value. An illuminated display shows the easily operated menu-driven functions. The metal-plated ABS plastic housing is water and dust resistant, and shields the unit against radio frequency interference. The PAC III® Basic Model can detect one of three dedicated gases: CO, H2S or O2. The PAC III® Standard Model includes a TWA alarm and will accept over 25 toxic gas sensors. The PAC III® Hygiene Model adds datalogging/downloading capabilities and a STEL (Short Term Exposure Level) alarm that warns when the preset level for a specific gas has been exceeded. The PAC III® Hygiene Kit includes the hygiene model plus the Download Kit and cases. The Download Kit includes an RS232 cable for a PC, a download module, 110v adapter and Gas Vision Software 4.0. To order a complete unit, use both model and sensor part numbers. All units and sensors sold individually.
Item No Description Unit 1 2+
4530310 PAC III Basic Each 4530010 PAC III Standard Each 4530011 PAC III Hygiene Each 4530311 PAC III Hygiene Kit Each 4530312 PAC III Download Kit Each 4530054 Leather Carrying Case Each 4595407 Ammonia Sensor, 0-200 ppm Each 4595433 Carbon Monoxide Sensor, 0-2000 ppm Each 4595409 Chlorine Sensor, 0-20.0 ppm Each 4595412 Hydride Sensor, 0-20.0 ppm Each 4595408 Hydrogen Cyanide Sensor, 0-50.0 ppm Each 4595434 Hydrogen Sulfide Sensor, 0-100 ppm Each 4595404 Nitric Oxide Sensor, 0-100 ppm Each A 4595405 Nitrogen Dioxide Sensor, 0-50 ppm Each 4595410 Organic Vapors Sensor, 0-200 ppm Each 4595435 Oxygen Sensor, 0-25.0% Vol. Each 4595406 Sulfur Dioxide Sensor, 0-100 ppm Each
B MiniWarn Multigas Monitor Kits
The MiniWarn is a portable gas measuring instrument that can continuously monitor ambient air for between one and four hazardous gases. The Basic Model (BP) features four measurement channels for up to three electrochemical sensors (for toxic gases and oxygen), one catalytic sensor (for combustible gases and vapors), and an attachable sampling pump. The Extended Datalogging Model (EP) adds an infrared interface for logging data. MiniWarn’s high tech, ergonomic design includes multifunctional software and a simple three-button key pad, housed in a rugged case, plus an attachable sampling pump. An audible 85 dB alarm indicates dangerous levels of gas. Operates on a rechargeable NiCad battery. Units come configured to measure combustible gases, O2, CO and H2S. Monitor with power pack measures 3.1" x 5.6" x 2.3" and weighs about 15.8 oz. Kits include a MiniWarn instrument, battery, charging accessories, attachable pump (BP or EP), 10' sampling hose, calibration adapter, filters, tools and indicated sensors. PS2 sensors are Dräger’s standard quality sensors. XS sensors have a three-year warranty, require very little maintenance, and need to be calibrated only once a year. XS-R sensors are Dräger’s top-of- the-line sensors that provide outstanding performance and stability and include an unprecedented five-year warranty. Kits sold individually. Also available: a large selection of sensors for many other gases.
Item No Description Unit
It is critical 4552684 MiniWarn BP, Ex-O2-CO-H2S, PS2 Sensors Each to detect 4552694 MiniWarn BP, Ex-O2-CO-H2S, XS Sensors Each hazardous 4552717 MiniWarn EP, Ex-O2-CO-H2S, XS Sensors Each agents in 4552759 MiniWarn BP, Ex-O2-CO-H2S, XS-R Sensors Each B the work place. Web Site
For more information on Dräger
Info
products, visit our web site at
www.saftgard.com/links
106 Phone Order 1-800-548-GARD(4273) Fax Order 1-888-548-4273
E-mail [email protected] Web Site www.saftgard.com International Fax +1-847-291-1610 J482 Instruments.qxp.ps 1/2/02 6:23 PM Page 107
INSTRUMENTATION GAS MONITORS
A accuro® Air Sampling Pump The accuro® Air Sampling Pump is designed for use with all Dräger short-term detector tubes. It is a hand-operated bellows-type pump that incorporates a scissors mechanism to ensure a uniform pump stroke, delivering exactly 100 cc’s of air with each sample. Includes an end-of-stroke indicator and a built-in stroke counter and weighs 1 lb. Measures 63⁄4" x 13⁄4" x 33⁄8". The Soft-Side Kit has the pump, a screwdriver, a permanent marker, and spare parts in a nylon transport case. The Hard-Side Kit includes the pump, a Pelican® case with custom foam, tube opener, allen wrench, rubber caps, pump manual and spare parts kit. The Deluxe Kit includes the pump, tube opener, screwdriver, pack of ten rubber caps, spare parts kit, permanent marker and a deluxe rigid carrying case. The accuro® 2000 Deluxe Kit is an electronic instrument designed to make an accuro® sampling pump (not included) perform a preprogrammed number of strokes. Simply insert the appropriate Dräger Tube into the end of the pump, program the required number of strokes and press the start button. An LCD displays the required number of strokes, then counts down the number of strokes remaining in the stroke cycle. This automated pumping guarantees safe and accurate measurements. Comes with rechargeable 6v battery pack and battery charger. Kits sold individually.
Item No Description Unit
6400000 accuro Pump Each 4053473 accuro Soft-Side Kit Each 4056443 accuro Hard-Side Kit Each 4053474 accuro Deluxe Kit Each 4500200 accuro 2000 Deluxe Kit Each
B Dräger Short-Term Tubes
A Dräger Tubes work with Dräger’s accuro® and accuro® 2000 sampling pumps to instantly measure concentrations of air contaminants. The pump draws a measured sample of air through a tube chosen specifically to detect a designated contaminant. If this contaminant is present in the sample, it reacts with the chemical reagent in the tube, causing it to change color. The intensity or length of this color change, measured against the graduations printed on the tube, indicates the level of contamination. This process is maintenance-free and requires minimal training. Over 500 gases and vapors can be detected and measured using Dräger Tubes. Tubes come in boxes of 10 unless otherwise indicated. Sold by the box.
accuro® 2000 Item No Description Unit
CH25301 Air Current Tube Each CH20501 Ammonia 5/a, 5-700 ppm Each 8101841 Benzene 0.5/c, 0.5-10 ppm, (5/Box) Each CH23501 Carbon Dioxide 0.1%/a, 0.1-6% Vol. Each 8101811 Carbon Dioxide 100/a, 100-3,000 ppm Each 6733051 Carbon Monoxide 2/a, 2-300 ppm Each CH25601 Carbon Monoxide 5/c, 5-700 ppm Each CH24301 Chlorine 0.2/a, 0.2-30 ppm Each 6733081 Formaldehyde 0.2/a, 0.2-5 ppm Each CH29501 Hydrochloric Acid 1/a, 0.5-10 ppm Each 6728181 Hydrochloric Acid 50/a, 50-5,000 ppm Each CH28101 Hydrogen Sulfide 0.2%/a, 0.2-7% Vol. Each 6728041 Hydrogen Sulfide 0.5/a, 0.5-15 ppm Each2 8101831 Hydrogen Sulfide 1/d, 1-200 ppm Each CH29101 Hydrogen Sulfide 100/a, 100-2,000 ppm Each CH29801 Hydrogen Sulfide 5/b, 5-600 ppm Each CH30001 Nitrogen Dioxide 0.5/c, 0.5-25 ppm Each CH29401 Nitrous Fumes 0.5/a, 0.5-10 ppm Each 6730201 Petroleum Hydrocarbons 100/a,100-2500 ppm Each CH31101 Phosphine 0.1/a, 0.1-4 ppm Each CH28401 Polytest, Qualitative Each CH31701 Sulfur Dioxide 1/a, 1-25 ppm Each 8101661 Toluene 5/b, 5-300 ppm Each 6728541 Trichloroethylene 2/a, 2-250 ppm Each 8101721 Vinyl Chloride 0.5/b, 0.5-30 ppm Each B 6733161 Xylene 10/a, 10-400 ppm Each
Phone Order 1-800-548-GARD(4273) Fax Order 1-888-548-4273 107
E-mail [email protected] Web Site www.saftgard.com International Fax +1-847-291-1610