NPC06UZDB

NETCONNECT® Cat 6 U/UTP RJ45 Patch Cord, LSZH

High-performance patch cords exceeding industry standards supporting NETCONNECT channel

specifications
Standardized transparent, slim-line boots provides consistent patch cord appearance and
supports highest density applications
Colored clips are available to fit the transparent boot, eliminating the need of multiple colors for
matching every jacket color
Colored pull latch tabs are available for easier plug release handling from the modular jack

Product Classification
Regional Availability Asia | EMEA | Latin America

Portfolio NETCONNECT®

Product Type Twisted pair patch cord

Product Series NPC

Ordering Note Cords < 1 m are valid elements for use in a channel or as an equipment
interconnect but due to their limited length are not guaranteed to meet
component compliance requirements that were developed to assess the
quality of longer cords | Cords > 1 m are authorized for use in channels
and are an effective standalone method used to connect active devices

General Specifications
Product Number CC6ZH

ANSI/TIA Category 6

Cable Type U/UTP (unshielded)

Conductor Type Stranded

Interface, Connector A RJ45 plug

Interface Feature, connector A Standard

Interface, Connector B RJ45 plug

Interface Feature, connector B Standard

Jacket Color Black | Blue | Green | Orange | Red | Slate | White | Yellow

Pairs, quantity 4

Separator Type Bisector

Transmission Standards ANSI/TIA-568.2-D | IEEE 802.3bt Type 4 | ISO/IEC 11801 Class E

Wiring T568B

Page 1 of 6

©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: November 14, 2022
NPC06UZDB
Dimensions
Cable Assembly Length Range (m) 1 – 30

Cable Assembly Length Range (ft) 1 – 100

Cable Assembly Length Range (cm) 15 – 999

Cable Assembly Length Range (in) 6 – 999

Diameter Over Jacket 5.97 mm | 0.235 in

Compatible Conductor Gauge, stranded 24 AWG

Electrical Specifications
Nominal Velocity of Propagation (NVP) 69 %

Remote Powering Fully complies with the recommendations set forth by IEEE 802.3bt (Type
4) for the safe delivery of power over LAN cable when installed according
to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA
TSB-184-A

Ordering Tree

Material Specifications
Conductor Material Tin plated copper

Mechanical Specifications
Plug Insertion Life, minimum 750 times

Environmental Specifications
-20 °C to +60 °C (-4 °F to +140 °F) Page 2 of 6

©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: November 14, 2022
NPC06UZDB
Operating Temperature -20 °C to +60 °C (-4 °F to +140 °F)

Relative Humidity Up to 93%, non-condensing

EN50575 CPR Cable EuroClass Fire Performance Dca

EN50575 CPR Cable EuroClass Smoke Rating s2

EN50575 CPR Cable EuroClass Droplets Rating d2

EN50575 CPR Cable EuroClass Acidity Rating a1

Environmental Space Low Smoke Zero Halogen (LSZH)

Flame Test Method IEC 60332-1

Safety Standard C-Tick | UL 1863

Smoke Test Method IEC 61034-2

Packaging and Weights

Packaging quantity 1

Regulatory Compliance/Certifications
Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

Included Products
2843020-3 – Integrated Boot and Pair Manager for MP-6AU, size 59, transparent
MP-6AU-Boot-59-1
6-2843007-1 – Modular Plug, Category 6A/6, Unshielded, Cond Insulation OD - 0.99mm, 100
MP-6AU-Plug-A-1 pcs

Page 3 of 6

©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: November 14, 2022
2843020-3 | MP-6AU-Boot-59-1

Integrated Boot and Pair Manager for MP-6AU, size 59, transparent

Product Classification
Regional Availability Asia | Australia/New Zealand | EMEA | Latin America | North America

Portfolio CommScope®

Product Type Modular plug boot

General Specifications
Boot Feature Color-clip compatible | Pull-tab compatible | Slimline | Snagless

Color Clear

Compatible Plug Type Cat 6 | Cat 6A

Dimensions
Compatible Cable Diameter, maximum 6.2 mm | 0.244 in

Compatible Cable Diameter, minimum 5.6 mm | 0.22 in

Packaging and Weights

Included Strain relief

Packaging quantity 100

Packaging Type Bag | Box

Regulatory Compliance/Certifications
Agency Classification
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant

Page 4 of 6

©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: September 20, 2022
6-2843007-1 | MP-6AU-Plug-A-1

Modular Plug, Category 6A/6, Unshielded, Cond Insulation OD - 0.99mm,

100 pcs

Product Classification
Regional Availability Asia | Australia/New Zealand | EMEA | Latin
America | North America

Portfolio CommScope®

Product Type Modular plug

General Specifications
ANSI/TIA Category 6 | 6A

Cable Type Round, unshielded

Conductor Type Solid | Stranded

Interface RJ45

Positions/Loaded Contacts 8/8

Termination Type IDC

Dimensions
Compatible Insulated Conductor Diameter, maximum 1.09 mm | 0.043 in

Compatible Insulated Conductor Diameter, minimum 0.89 mm | 0.035 in

Contact Plating Thickness 1.27 µm

Compatible Conductor Gauge, solid 26–23 AWG

Compatible Conductor Gauge, stranded 26–23 AWG

Electrical Specifications
Current Rating, maximum 0.75 A

Insulation Resistance, minimum 500 mOhm

Safety Voltage Rating 150 Vac

Page 5 of 6

©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: October 18, 2022
6-2843007-1 | MP-6AU-Plug-A-1
Material Specifications
Contact Base Material Phosphor Bronze

Contact Plating Material Gold

Material Type Glass filled polycarbonate

Mechanical Specifications
Plug Insertion Life, minimum 750 times

Environmental Specifications
Operating Temperature -10 °C to +60 °C (+14 °F to +140 °F)

Relative Humidity Up to 93%, non-condensing

Safety Standard UL 1863

Packaging and Weights

Packaging quantity 100

Packaging Type Bag | Box | Carton

Regulatory Compliance/Certifications
Agency Classification
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant

Page 6 of 6

©2022 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: October 18, 2022