Triple Output
DC regulated power supply
EP - 603 / 613 (Linear mode)
Description Features
The EP - 603/613 series are designed for • One 0 - 30V adjustable output
general electronic servicing, school electronics, • One 5V 500mA snap-on output
laboratory and hobbyist. All units may be used as • One 12V 500mA snap-on output
either a constant voltage supply with current • Current limiting with Indicator
limiting or as constant current source with • Adjustable current control
voltage limiting. Three independent outputs, two • Overload and short circuit protection
are fixed voltage, and one adjustable voltage. • Galvanized steel case
• Poly-carbonate front panel
Specifications
EP - 603 EP - 613
Output Voltage 0 - 30VDC
Rated Output Current 2.5A
Fixed Output Voltage 1 5VDC 0.5A Continuous / 1A Maximum
Fixed Output Voltage 2 12VDC 0.5A Continuous / 1A Maximum
Ripple & Noise (r.m.s.) <5mV
Load Regulation <0.05% +10mV
Line Regulation <0.05% +10mV
Input Voltage 230VAC / 50Hz~ (120VAC / 60Hz~ or on request)
Meter Type Analog Meter LCD Meter
V Meter Range 0 - 30V 3 digit display
A Meter Range 0 - 3A 3 digit display
Meters' Accuracy 7% fsd 1% +2 counts
Output Terminals One variable main output screw-on type ,
two snap on fixed voltage 1 and 2
Cooling System Natural Convection
Protection Devices Overload , Short Circuit
Approvals CE EN 60065 , EN 55014
Dimensions (WxHxD) 150 x 145 x 200mm / 5.9 x 5.7 x 7.9in.
Weight 2.8Kgs / 6.2Lbs
Accessory User Manual
All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.
* SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE * 9
