Scribd
Upload
46 views7 pages

ZBT-Z8106AX-M2 - T Specification

ZBT-Z8106AX-M2 -T router Specification

Uploaded by

evertheinsmit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views7 pages

ZBT-Z8106AX-M2 - T Specification

ZBT-Z8106AX-M2 -T router Specification

Uploaded by

evertheinsmit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Shenzhen Zhibotong Electronics Co.

, Ltd

Product model: Z8106AX-M2-T-T


Shenzhen Zhibotong Electronics Co., Ltd

Table of contents

1 Overview ................................................................. 错误！未定义书签。

1.1 Brief Overview ................................................错误！未定义书签。

1.2 Reference standards ..................................... 错误！未定义书签。

2 Product images ............................................................................. 3

3 Main features of the product ......................................................... 4

4 Hardware Features ........................................................................5

4.1 Hardware interface introduction ........................................... 6

4.2 Introduction to indicator light functions .................................6

4.3 Hardware platform introduction ............................................ 7

1 review

1.1 Brief overview

This document describes the electrical characteristics, RF performance,

dimensions and application environment of the Z8106AX-M2-T. With the

introduction of this document, end users or developers can quickly understand the

hardware functions of Z8106AX-M2-T.

Z8106AX-M2-T-T is a 5G/4G+WIFI6 home CPE router, which can access the

Internet through 5G/4G mobile communication dial-up or 1000Mbps WAN port,

and then share the Internet network through wireless WiFi 6 and 1000Mbps wired
Shenzhen Zhibotong Electronics Co., Ltd

LAN.

1.2 Reference standards

Related standard specifications:

1)USB3.0/USB2.0 bus standard

2)PCI- Express bus standard

3)SIM/USIM interface standard

4)IEEE802.11n/g/b/a/ac/ax

5)IEEE802.3/802.3u/802.ab

6)PCI Express M.2 Specification Rev1.1

7)5G/4G mobile communication standard, specifically determined by the

selected 5G/4G mobile communication module

8) Software: openwrt firmware V21.02

2 Product image
Shenzhen Zhibotong Electronics Co., Ltd
Shenzhen Zhibotong Electronics Co., Ltd

3 Product main features

1) Using MT7981B solution, ARM Cortext-A53 dual-core CPU, main frequency up


to 1.3GHZ

2) Adopt independent WIFI6 chip, MT7976CN, the speed is up to 3000Mbps

3) 256MB DDR3 RAM, with 128MB SPI NAND Flash

4) 1xWAN+4xLAN Gigabit ports

5) Support "one-key flashing mode", that is, long press the reset button to enter the
rescue flashing mode...

6) Built-in 2 M.2/Mini-PCIE standard interfaces (choose one of the two), which can
be used to connect to 5G/4G mobile communication modules

7) External standard Nano SIM card (small card) interface and built-in eSIM
(QFN-8 6mmx5mm) card interface, support SIM/USIM card

8) External high-gain WIFI antenna, 360-degree wireless signal without dead angle
Shenzhen Zhibotong Electronics Co., Ltd

4 Hardware function

4.1 Hardware Interface Introduction

1*WAN port, 1000Mbps/2.5GB supports automatic flip (Auto


MDI/MDIX)
Conforms to IEEE 802.3/802.3u/802.ab
RJ45 ports

4* LAN port, 1000Mbps supports automatic flip (Auto MDI/MDIX)


Conforms to IEEE 802.3/802.3u/802.ab

power interface DC5.5*2.1MM, support wide power range 12V~32V


Button 1 reset button, 1 MESH button
4G/5G interface 1 *M.2 ports
2 *detachable omnidirectional 5dbi 2.4G antennas

Antennas 2 *detachable omnidirectional 5dbi 5.8G antennas

4*detachable omnidirectional 5dbi 5G mobile communication


antennas or 2* 4G Antennas

4.2 Indicator light function introduction

1. The red light is on during the boot process, when the boot is
complete, the red light is off and the green light is on
2. Press the mesh button to enter the mesh pairing state, the
green light flashes once a second, and the other lights are off
3. The network of the main device is normal, and the green
MESH LED
light and blue light are on at the same time (cyan)
4. The MESH connection from the device is successful. If the
distance is far away, the green light and red light will be on at
the same time (orange), and the green light and blue light will
be on at the same time (cyan) if the distance is suitable.
The 4G/5G1 network is always on, and flashes when there is
4G/5G1 LED
data communication
Shenzhen Zhibotong Electronics Co., Ltd

4.3 Hardware Platform Introduction

MT7981B ARM Cotext-A53 dual-core CPU, 1.3GHZ main


Processor
frequency
WIFI Chip MT7976CN IEEE 802.11n/g/b/a/ac/ax,Max. 3000Mbps
RAM DDR3 256MB

Flash SPI NAND Flash 128MB


EMMC 8GB (Choosable)

4.4 Hardware watchdog function introduction

This hardware product is designed with a hardware watchdog function. After


the hardware watchdog is powered on, it will automatically start up and detect the
heartbeat level output by the routing system that jumps once every second. If the
routing system itself fails (such as a crash), it will also Naturally, the heartbeat level
can no longer be output. At this time, if the hardware watchdog has not detected the
heartbeat level within 120 seconds, it will shut down by itself for 15 seconds and then
restart the entire system.
When the routing system is running normally, but the 5G/4G module dialing is
abnormal, the routing system will control the power supply of the 5G/4G module
through GPIO, so that the module will automatically restart to fix the 5G/4G dialing
abnormality.

Specific function of hardware watchdog

Routing system exception Module dialing

exception

restart the whole system Only restart the module

You might also like