IoT Remote Monitoring Solution

EDGE DEVICES - WIRELESS SENSORS

LaserTilt90
LS-G6-LAS-TIL90

It can also be used when permanent monitoring is required. The

wireless sensor can also measure deformations in underground
excavations and mining without causing work disruptions and delays.

Worldsensing LaserTilt90 is a 2-in-1 laser distance meter and Long-range and low-power

tiltmeter. The laser measures the relative distance to a reference

point that can be either natural surfaces or target foils. Meanwhile, The LaserTilt90 is capable of transmitting data via long-range radio to
the tiltmeter provides measurements of changes from the vertical a gateway connected to the Internet up to 9 miles/ 15 km. away. One
level, either on the ground or in structures. This 2-in-1 wireless sensor gateway can also support dozens of data loggers in the same
is designed to provide robust data when monitoring inclinations, network, depending on the reporting period, through a star or tree
movements and differential settlements of slopes or infrastructures.
network topology.

The LaserTilt90 can be easily located along the convergence cross In terms of energy consumption, Worldsensing LaserTilt90 is an
sections up to the excavation front or until the measured relative autonomous battery-powered device with C-size batteries that can
displacements are stabilized when the required frequency of last up to 10 years with minimal to zero maintenance required. It is
measurements is reduced. IP68 certified and operating temperature from -0 to +50C.

FEATURES APPLICATIONS
2-in-1 Laser Meter + tiltmeter STRUCTURAL HEALTH
3-axis inclination with respect to gravity's direction and a range of ± 90⁰ Convergence monitoring for tunnels, shafts and gelleries.
Accurate distance measurement through a visible Laser Class II with 655 Static deflections of piles, piers and decks of bridges and other
nm. structures
Internal temperature (accuracy: ±1 °C), signal strenght and gain collected
and transmitted at each reading. GEOTECHNICAL MONITORING

Robust, compact design and IP68 grade weather-proof box. Slope movements in landslides, embankments

Long battery life (>10 years @1h sampling rate). Ground movements in underground excavations

Long range communications through LoRa communications.

SOFTWARE ADVANTAGES
User-friendly Android configuration app included. Suitable for unattended, large scale projects

Web browser software for network, device and data management. Very low maintenance equipment due to its robustness and low-power
consumption.
Single-gateway network setup with CMT Edge software (dataserver and
radio server hosted in the gateway and data access through standard Provides complementary data for existing geospatial monitoring when
CSV downloads, FTP push, Modbus TCP, API REST and MQTT1). high precision and robustness is needed.

Multi-gateway network setup with CMT Cloud software and advanced Easy configuration through the Worldsensing mobile application
features with data access via standard CSV downloads, FTP push, API
REST and MQTT push1. Customer support from a expert team of geotechnical monitoring

Pioneer company in the field, long history in monitoring large-scale civil

infrastructure
1 MQTT available upon request.

Barcelona

Viriat 47, Edificio Numancia 1, 10th floor,

www.worldsensing.com
08014 Barcelona, Spain

[email protected] (+34) 93 418 05 85 United Kingdom United States Singapore Poland

 IoT Remote Monitoring Solution

Technical specifications

GEnERAL TILTMETER
Sensor type 2-in-1 Laser Distance Meter + Tiltmeter Sensor 3-axis MEMS accelerometer

Selectable from:
Range5 ±90°
Reporting Period 30 s

1, 2, 5, 10, 15, 30 min

3-axis inclination measurement with respect to
1, 2, 4, 6, 12, 24 h gravity's direction. Reports the two axes of
Axes
Time synchronization rotation from the horizontal plane in any
discipline by radio Better than ±30 seconds orientation

Battery type 2 x 3.6V C-Size user-replaceable, high energy Resolution 0.0001°

density batteries
Repeatability <0.0003°
Interfaces Internal mini USB

Device configuration Worldsensing App

Typical measuring ±1°
accuracy
X Laser pointing mode.S
X Tiltmeter calibration parameters check using Time required for a
App advanced Up to 4 seconds, depending on distance.
functionalities the app.S reading
X Radio signal coverage tests for easy
installation. Accuracy f(α)

LASER DISTANCE METER

Angle (α) Accuracy
Sensor Visible Laser Class II with 655 nm.
± 2⁰ ± 0.0025º
Laser power 0.75 to 0.95 mW ± 4⁰ ± 0.005º
± 15⁰ ± 0.013º
Resolution 0.1 mm ± 45⁰ ± 0.08º
± 85⁰ ± 0.23º
Repeatability (±σ )4 0.15 mm
Offset Temperature
± 0.002°/°C
Measuring range at 0.05 to 150 m dependency
favorable conditions
Stability @ 14 h <0.003°
Typical measuring ±1 mm
accuracy Time required for a
9.6 s
reading
Time required for a
Up to 4 seconds, depending on distance.
reading Standard deviation of the set of measurements
collected during the reading and transmitted
Accuracy f(d) Measure of dispersion
with each tilt measurement. It can be used to
filter noisy data.
Under Favorable Under Unfavorable
Distance (d)
Conditions2 Conditions3
Temperature sensor
0.1 ⁰C
1m ±1 mm ±2 mm resolution
10 m ±1 mm ±2 mm
20 m ±1.5 mm ±3 mm
5 The recommended measuring range is ±85º. Outside of this range, the
50 m ±4 mm ±7 mm margin of error increases. However, when one of the axes is close to 90º, the
100 m ±9 mm ±15 mm other axis will be close to 0º and measuring the same inclination.
150 m ±16 mm Not Applicable

Signal strength Signal strength and gain are transmitted

with each laser measurement. It can be
used for maintenance purposes.

2 On natural objects. Low target illumination (<3K lx), moderate temperatures.

3 On natural objects. High target illumination (3K lx), full specified operating
temperature range.

4 Under favorable conditions and distances up to 10m.

Barcelona

Viriat 47, Edificio Numancia 1, 10th floor,

www.worldsensing.com
08014 Barcelona, Spain

[email protected] (+34) 93 418 05 85 United Kingdom United States Singapore Poland

 IoT Remote Monitoring Solution

BATTERY LIFE ESTIMATIONS7

Distance 25 m 65 m
MECHANICAL
5 min 6 months 1.8 years
Box dimensions (WxLxH) 100x100x61 mm.
Reporting Period 1 h 5.1 years 10.2years
Overall dimensions 150x120x61 mm (excluding antenna).
6h 12 years 14.3 years

Operating temperature -10⁰C to +50⁰C

6 The distances have been tested by Worldsensing and have been accomplished in
Storage temperature -25⁰C to + 70⁰C actual projects using the standard antenna. However, radio range depends on the
environment so these distances are only indicative. Consult with us for your
Weather protection IP68 (at 2 m for 2 hours) application.

7 Typical Europe radio configuration. Spreading factor 9, radio transmit power

Weight (excluding batteries) 841 g 14dBm. Considering laboratory conditions. Consumption varies depending on the
sensor used, sampling rate and environmental and wireless network conditions.

External Antenna Battery life estimations using recommended Saft batteries LSH14, based on the
100 mm length (including connector) lifetime mathematical model using Barcelona weather profile. Average values
provided.
Mounting options | Clearance holes for M4 hexagon socket
head cap screws in bottom.l
| Blind holes for M5 screws on the lateral
side.

Mini USB port for configuration and

External Port data access; can also be used to
power the node (a) (b) (c)

Box material Aluminium alloy

Batteries 1 to 2

Vibration resistance ISO 9022-3 compliant. Method 36,

Severity 05 (0.15mm, 10Hz..55Hz)

MEMORY

Memory Structure Circular Buffer

100 000 readings including time, distance

Fig. 1: Different applications for the LaserTil90. (a) convergence monitoring in
Maximum Memory Records and 3 axis tiltmeter measurements. tunnels and galleries, (b) convergence monitoring in construction shaft, (c)
crack monitoring in open pit mines and rock slopes.

RADIO SPECIFICATIONS
Radio band ISM sub 1GHz

Operating frequency Adjustable

bands
Bidirectional Remote sampling rate change / Clock
communications synchronization

Maximum link budget 151 dB / 157 dB

Configuration LoRa Star/ LoRa Tree

Radio range6

Range open field 15 km

Range city street 4 km

Range manhole in a city 2 km

street
Tunnel 4 km

Barcelona

Viriat 47, Edificio Numancia 1, 10th floor,

www.worldsensing.com
08014 Barcelona, Spain

[email protected] (+34) 93 418 05 85 United Kingdom United States Singapore Poland

 IoT Remote Monitoring Solution

ACCESSORIES
LS-ACC-CELL-1C Saft LSH 14 C-size spiral cell (5.8Ah).

LS-ACC-IN15-VP7 Mounting plate for vertical mounting; attachment

option: anchor rods.
Versatile plate for horizontal surface mounting; Fig. 3: LaserTilt90 mounted on a
LS-ACC-IN15-HP7
attachment option: anchor rods or glue;
swivel mounting bracket WS-ACC-
includes a threaded hole available for installing a LAS-NSB on a vertical surface.
monitoring prism or a button head screw for precise
levelling.

LS-ACC-LAS-AP Adjustable mounting plate for vertical surface;

attachment option: anchor rods. This support allows
limited rotation in two axis with respect to the
reference surface. This support is proper for fine
aiming of the laser beam.
Fig. 4: LaserTilt90 mounted on a

swivel mounting bracket WS-ACC-
LS-ACC-LAS-SB8 Swivel mounting bracket; attachment option: pole LAS-NSB on a horizontal surface.
fixing 50 mm U-bolts, anchor rods or on a
convergence bolt with G 3/8” male thread.

The swivel mounting bracket allows swivelling around

the vertical axis (+/- 90°) and a minor rotation of the
enclosure on the plate (+/- 3°).

WS-ACC-LAS-TG8 Swivel mounting bracket; attachment option: pole

fixing 50 mm U-bolts and anchor rods.

The swivel mounting bracket allows swiveling around

the vertical axis (+/- 90°) and a minor rotation of the
enclosure on the plate (+/- 3°).

Kit of 3 anchor rods for injection. M8, 110 mm

LS-ACC-ANC-H9 Length, nuts and washers included. Fig. 5: LaserTilt90 mounted on a

Kit of 3 magnets, Ø 32 mm, strength approx. 30 kg, swivel mounting bracket LS-ACC-
LS-ACC-MAG10 screws included. LAS-SB that includes the attachment
Laser target rotatable and swivelable 360º compatible option of a convergence bolt with a
WS-ACC-LAS-TG with convergence bolt G 3/8" male thread, M8 anchor G3/8” male thread.
rods and M5 magnets.

Fig. 6: Laser target WS-ACC-LAS-TG.

Recommended to increase laser
readings accuracy when beam points
the surface in an oblique angle.

Fig. 2: Inside view of the LaserTilt90.

7 The laser beam cannot be aimed using this mounting plate because the node is fixed.

8 The swivel mounting bracket allows swivelling and rotation but these degrees of
freedom, even if the bracket is fixed in place with screws or fasteners, can aversely affect
the inclination measurement specifications of the whole system.

9 The kit can be used to fix the following mounting kits: LS-ACC-IN15-HP, LS-ACC-IN15-
VP, LS-ACC-LAS-AP, LS-ACC-LAS-SB.
FOR MORE INFORMATION

10 The kit of 3 magnets can be used to fix the LS-ACC-IN15-VP mounting plate. Scan to access the edge device user guide

GENERAL DISCLAIMER:

Specifications are subject to change without notice and should not be construed as a commitment by Worldsensing. Worldsensing assumes no responsibility for any
errors that may appear in this document. In no event shall Worldsensing be liable for incidental or consequential damages arising from the use of this document or
the systems described in this document.

All Content published or distributed by Worldsensing is made available for the purposes of general information. You are not permitted to publish our content or make
any commercial use of our content without our express written consent. This material or any portion of this material may not be reproduced, duplicated, copied, sold,
resold, edited, or modified without our express written content.

v.20240304

Barcelona

Viriat 47, Edificio Numancia 1, 10th floor,

www.worldsensing.com
08014 Barcelona, Spain

[email protected] (+34) 93 418 05 85 United Kingdom United States Singapore Poland