JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY

ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)
ANANTHAPURAMU–515002(A.P) INDIA

B. Tech (Regular-Full time)

(Effective for the students admitted into I year from the Academic
Year 2023-24 onwards)

COMPUTER SCIENCE AND ENGINEERING

I YEAR COURSE STRUCTURE AND SYLLABUS

 B. TECH.-CSE-COURSE STRUCTURE & SYLLABUS–R23
(Applicable from the academic year 2023-24 onwards)

INDUCTION PROGRAMME

S. No. Course Name Category L-T-P-C

Physical Activities--Sports, Yoga and Meditation,
1 Plantation MC 0-0-6-0

2 Career Counseling MC 2-0-2-0

3 Orientation to all branches --career options, tools, etc. MC 3-0-0-0

Orientation on admitted Branch—corresponding labs,
4 tools and platforms EC 2-0-3-0

5 Proficiency Modules & Productivity Tools ES 2-1-2-0

6 Assessment on basic aptitude and mathematical skills MC 2-0-3-0

7 Remedial Training in Foundation Courses MC 2-1-2-0
8 Human Values & Professional Ethics MC 3-0-0-0
Communication Skills—focus on Listening, Speaking,
9 Reading, Writing skills BS 2-1-2-0

10 Concepts of Programming ES 2-0-2-0

B. Tech. – I Year I Semester (Computer Science &Engineering)

Subject
S. No. Subject L/D T P Credits
Code
Communicative English
1 23A15501 2 0 0 2
Common to EEE, ECE, CSE
Chemistry
2 23A15301 3 0 0 3
Common to EEE, ECE, CSE
Linear Algebra & Calculus
3 23A15101 3 0 0 3
Common to All Branches
Basic Civil & Mechanical Engineering
4 23A11301 3 0 0 3
Common to EEE, ECE, CSE
Introduction to Programming
5 23A10501 3 0 0 3
Common to All Branches
Communicative English Lab
6 23A15502 0 0 2 1
Common to EEE, ECE, CSE
Chemistry Lab
7 23A15302 0 0 2 1
Common to EEE, ECE, CSE
Engineering Workshop
8 23A10302 0 0 3 1.5
Common to EEE, ECE, CSE
Computer Programming Lab
9 23A10502 0 0 3 1.5
Common to All Branches
Health and wellness, Yoga and sports
10 23A15901 - - 1 0.5
Common to EEE, ECE, CSE
Total 14 00 11 19.5

B. Tech. – I Year II Semester

Subject
S. No. Subject L/D T P Credits
Code
Engineering Physics
1 23A25201 3 0 0 3
Common to EEE, ECE, CSE
Differential Equations and Vector
3 0 0 3
2 23A25101 Calculus
(Common to All Branches)
Basic Electrical and Electronics
3 23A22401 Engineering 3 0 0 3
Common to EEE, ECE, CSE
Engineering Graphics
4 23A20302 1 0 4 3
Common to EEE, ECE, CSE
5 23A20501 Data Structures 3 0 0 3
Engineering Physics Lab
6 23A25202 0 0 2 1
Common to EEE, ECE, CSE
IT Work Shop
7 23A20501 0 0 2 1
Common to EEE, ECE, CSE
Electrical and Electronics Engineering
8 23A22402 Workshop 0 0 3 1.5
Common to EEE, ECE, CSE
9 23A20503 Data Structures -Lab 0 0 3 1.5
NSS/NCC /SCOUTS and Guides/
10 23A25902 Community Service - - 1 0.5
Common to EEE, ECE, CSE
Total 13 00 15 20.5
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P) INDIA

B. Tech. – I Year I Semester

(Common to EEE, ECE, CSE)

Subject Code Title of the Subject L T P C

23A15501 Communicative English 2 0 0 2

Course Objectives:
• The main objective of introducing this course, Communicative English, is to facilitate effective
Listening, Reading, Speaking and Writing skills among the students.
• It enhances the same in their comprehending abilities, oral presentations, reporting useful
information and providing knowledge of grammatical structures and vocabulary.
• This course helps the students to make them effective in speaking and writing skills and to make
them industry-ready.
Course Outcomes:
• CO1: Understand the context, topic, and pieces of specific information from social or
Transactional dialogues.
• CO2: Apply grammatical structures to formulate sentences and correct word forms.
• CO3: Analyze discourse markers to speak clearly on a specific topic in informal discussions.
• CO4: Evaluate reading/listening texts and to write summaries based on global comprehension
of these texts.
• CO5: Create a coherent paragraph, essay, and resume.
.
SYLLABUS

UNIT I
Lesson: HUMANVALUES: Gift of Magi (Short Story)
Listening: Identifying the topic, the context and specific pieces of information by listening to
short audio texts and answering a series of questions.
Speaking: Asking and answering general questions on familiar topics such as home, family,
work, studies and interests; introducing one self and others.
Reading: Skimming to get the main idea of a text; scanning to look for specific pieces of
information.
Writing: Mechanics of Writing- Capitalization, Spellings, Punctuation-Parts of Sentences.
Grammar: Parts of Speech, Basic Sentence Structures-Forming questions
Vocabulary: Synonyms, Antonyms, Affixes (Prefixes/Suffixes), Root words.

UNIT II

Lesson: NATURE: The Brook by Alfred Tennyson (Poem)

Listening: Answering a series of questions about main ideas and supporting ideas after listening to
audiotexts.
Speaking: Discussion in pairs/small groups on specific topics followed by short structured
talks.
 Reading: Identifying sequence of ideas; recognizing verbal techniques that help to link the
ideas in a paragraph together.
Writing: Structure of a paragraph - Paragraph writing (specific topics)

Grammar: Cohesive devices-linkers, use of articles and zero article; prepositions.

Vocabulary: Homonyms, Homophones, Homographs

UNITIII
Lesson: BIOGRAPHY: Elon Musk
Listening: Listening for global comprehension and summarizing what is listened to.
Speaking: Discussing specific topics in pairs or small groups and reporting what is discussed
Reading: Reading a text in detail by making basic inferences-recognizing and interpreting
specific context clues; strategies to use text clues for comprehension.
Writing: Summarizing, Note-making, paraphrasing
Grammar: Verbs-tenses; subject-verb agreement;
Vocabulary: Compound words, Collocations

UNITIV

Lesson: INSPIRATION: The Toys of Peace by Saki

Listening: Making predictions while listening to conversations/ transactional dialogues
Without video; listening with video.
Speaking: Role plays for practice of conversational English in academic contexts (formal and informal)–
Asking for and giving information /directions.
Reading: Studying the use of graphic elements in texts to convey information, reveal
trends/patterns/relationships, communicate processes or display complicated data.
Writing: Academic Writing (Letter Writing, Letter writing, creative writing, critical thinking)
Grammar: Reporting verbs, Direct &Indirect speech, Active &Passive Voice
Vocabulary: Words often confused, Jargons

UNITV
Lesson: MOTIVATION: The Power of Intrapersonal Communication (An Essay)
Listening: Identifying key terms, understanding concepts and answering a series of relevant
questions that test comprehension.
Speaking: Formal oral presentations on topics from academic contexts
Reading: Reading comprehension.
Writing: Writing structured essays on specific topics.
Grammar: Editing short texts–identifying and correcting common errors in grammar and usage
(articles, prepositions, tenses, subject verb agreement)
Vocabulary: Technical Jargons

Textbooks:
1. Path finder: Communicative English for UndergraduateStudents,1st Edition,
OrientBlackSwan,2023(Units 1,2&3)
2. Empowering with Language byCengagePublications,2023(Units4 &5)

Reference Books:
1. Dubey, ShamJi & Co. English for Engineers, VikasPublishers,2020
2. Bailey, Stephen. Academic writing: A Handbook for International Students.Routledge,2014.
3. Murphy, Raymond. English Grammar in Use, Fourth Edition, Cambridge University Press,
2019.
4. Lewis, Norman. Word Power Made Easy-The Complete Handbook for Building a Superior
Vocabulary.Anchor,2014.
Web Resources:
GRAMMAR:
 1. www.bbc.co.uk/learningenglish
2. https://dictionary.cambridge.org/grammar/british-grammar/
3. www.eslpod.com/index.html
4. https://www.learngrammar.net/
5. https://english4today.com/english-grammar-online-with-quizzes/
6. https://www.talkenglish.com/grammar/grammar.aspx

VOCABULARY
1. https://www.youtube.com/c/DailyVideoVocabulary/videos
2. https://www.youtube.com/channel/UC4cmBAit8i_NJZE8qK8sfpA
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P) INDIA

B. Tech. – I Year I Semester

(Common to EEE, ECE, CSE)
Subject code Title of the Subject L T P C
23A15301 Chemistry 3 0 0 3

Course Objectives:
• To familiarize engineering chemistry and its applications
• To train the students on the principles and applications of electrochemistry and polymers
• To introduce instrumental methods, molecular machines and switches.

Course Outcomes:
• CO1: Apply Schrodinger wave equation to hydrogen atom, Illustrate the molecular orbital energy
level diagram of different molecular species, Explain the band theory of solids for conductors,
semiconductors and insulators Discuss the magnetic behavior and colour of complexes.
• CO2: Explain the band theory of solids for conductors, semiconductors and insulators. Explain
Basic concept and application of Super Conductors Super Capacitors Demonstrate the application
of Fullerenes, carbon nano tubes and Graphines nanoparticles
• CO3: Apply Nernst equation for calculating electrode and cell potentials, differentiate between
potentiometric and conductometric titrations, Explain the theory of construction of battery and
fuel cells, solve problems based on cell potential
• CO4: Explain the different types of polymers and their applications, Explain the preparation,
properties and applications of PVC, Bakelite Describe the mechanism of conduction in
conducting polymers, Discuss Buna-S and Buna-N elastomers and their applications
• CO5: Explain the different types of spectral series in electromagnetic spectrum, Understand the
principles of different

MAPPING BETWEEN COURSE OUTCOMES AND PROGRAMME OUTCOMES

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1
CO2
CO3
CO4
CO5

UNIT I: Structure and Bonding Models: (10 hrs.)

Fundamentals of Quantum mechanics, Schrodinger Wave equation, significance of Ψ and Ψ2, particle
in one dimensional box, molecular orbital theory – bonding in homo- and hetero nuclear diatomic
molecules – energy level diagrams of O2 and CO, etc. π-molecular orbitals of butadiene
and benzene, calculation of bond order.
Learning Outcomes:
At the end of this unit, the students will be able to
• apply Schrodinger wave equation to hydrogen atom (L3)
• illustrate the molecular orbital energy level diagram of different molecular species (L2)
• explain the calculation of bond order of O2 and CO molecules (L2)
• Discuss the basic concept of molecular orbital theory (L3)

UNIT II: Modern Engineering materials (8hrs)

Semiconductors – Introduction, basic concept, application

Super conductors-Introduction, basic concept, applications.
Super capacitors: Introduction, Basic Concept-Classification – Applications.
Nano materials: Introduction, classification, properties and applications of Fullerenes, carbon
nano tubes and Graphines nanoparticles.

Learning Outcomes:
At the end of this unit, the students will be able to
• Explain the Applications of Super Capacitors (L2).
• Discuss the Basic concept of Super Conductors (L3).
• Explain the band theory of solids for conductors, semiconductors and insulators (L2)
• Demonstrate the application of Fullerenes, carbon nanotubes and Graphines nanoparticles (L2).

UNIT III: Electrochemistry and Applications (10hrs)

Electrochemical cell, Nernst equation, cell potential calculations and numerical problems, potentiometry-
potentiometric titrations (redox titrations), concept of conductivity, conductivity cell, conductometric
titrations (acid-base titrations), pH metry.
Electrochemical sensors – potentiometric sensors with examples, amperometry sensors with examples.
Primary cells – Zinc-air battery, Sodium-Air battery Secondary cells –lithium-ion batteries- working of the
batteries including cell reactions;
Fuel cells, hydrogen-oxygen fuel cell– working of the cells. Polymer Electrolyte Membrane Fuel cells
(PEMFC).
Learning Outcomes:
At the end of this unit, the students will be able to
• apply Nernst equation for calculating electrode and cell potentials (L3)
• differentiate between potentiometric and conduct metric titrations (L2)
• explain the theory of construction of battery and fuel cells (L2)
• solve problems based on cell potential (L3)

UNIT IV: Polymer Chemistry (10hrs)

Introduction to polymers, functionality of monomers, chain growth and step growth polymerization,
coordination polymerization, with specific examples and mechanisms of polymer formation, Polydispersity
index (PDI)-significance
Plastics –Thermo and Thermosetting plastics, Preparation, properties and applications of – PVC, Teflon,
Bakelite, Nylon-6, 6, carbon fibers.
Elastomers–Buna-S, Buna-N–preparation, properties and applications.
Conducting polymers – polyacetylene, polyaniline, – mechanism of conduction and applications. Bio-
Degradable polymers - Poly Glycolic Acid (PGA), Polyl Lactic Acid (PLA).
Learning Outcomes:
At the end of this unit, the students will be able to
• explain the different types of polymers and their applications (L2)
• explain the preparation, properties and applications of Bakelite, Nylon-6,6, and carbon fibers (L2)
• describe the mechanism of conduction in conducting polymers (L2)
• discuss Buna-S and Buna-N elastomers and their applications (L2)

UNIT V: Instrumental Methods and Applications (10 hrs.)

Electromagnetic spectrum. Absorption of radiation: Beer-Lambert’s law. UV-Visible Spectroscopy,

electronic transition, Principle, Instrumentation and Applications, IR spectroscopy, fundamental modes
and selection rules, Principle, Instrumentation and Applications. Chromatography-Basic Principle,
Classification-HPLC: Principle, Instrumentation and Applications.
Learning outcomes:
After completion of this unit, students will be able to:
• explain the different types of spectral series in electromagnetic spectrum (L2)
• understand the principles of different analytical instruments (L2)
• explain the different applications of analytical instruments (L2)

Textbooks:
1. Jain and Jain, Engineering Chemistry, 16/e, Dhanpat Rai, 2013.
2. Peter Atkins, Julio de Paula and James Keeler, Atkins’ Physical Chemistry, 10/e, Oxford University Press,
2010.

Reference Books:
1. Skoog and West, Principles of Instrumental Analysis, 6/e, Thomson, 2007.
2. J.D. Lee, Concise Inorganic Chemistry, 5th Edition, Wiley Publications, Feb.2008
3. Textbook of Polymer Science, Fred W. Bill mayer Jr, 3rd Edition
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P) INDIA

B. Tech. – I Year I Semester

(Common to All Branches)
Subject code Title of the Subject L T P C
23A15101 Linear Algebra & Calculus 3 0 0 3

Course Objectives:
• To equip the students with standard concepts and tools at an intermediate to advanced level
mathematics
• To develop the confidence and ability among the students to handle various real-world problems
and their applications.
Course Outcomes: At the end of the course, the student will be able to
• CO1: Develop and use of matrix algebra techniques that are needed by engineers for practical
applications.
• CO2: Utilize mean value theorems to real life problems.
• CO3: Familiarize with functions of several variables which is useful in optimization.
• CO4: Learn important tools of calculus in higher dimensions.
• CO5: Familiarize with double and triple integrals of functions of several variables in two
dimensions using Cartesian and polar coordinates and in three dimensions using
cylindrical and spherical coordinates.

UNIT I: Matrices
Rank of a matrix by echelon form, normal form. Cauchy–Binet formulae (without proof). Inverse of
Non- singular matrices by Gauss-Jordan method, System of linear equations, consistency of linear system
of equations Solving system of Homogeneous and Non-Homogeneous equations by Gauss
elimination method, Jacobi and Gauss Seidel Iteration Methods.

UNIT II: Eigen values, Eigenvectors and Orthogonal Transformation

Eigenvalues, Eigenvectors and their properties, Diagonalization of a matrix, Cayley-Hamilton
Theorem (without proof), finding inverse and power of a matrix by Cayley-Hamilton Theorem,
Quadratic forms and Nature of the Quadratic Forms, Reduction of Quadratic form to canonical
forms by similarity transformation, Lagrange’s reduction and Orthogonal Transformation, types
of complex matrices (Hermition skew Hermition & unitary)

UNIT III: Calculus

Mean Value Theorems: Rolle’s Theorem, Lagrange’s mean value theorem with their
geometrical interpretation, Cauchy’s mean value theorem, Taylor’s and Maclaurin theorems
with remainders (without proof), Problems and applications on the above theorems.
Radius of curvature, centre of curvature and circle of curvature.
UNIT IV: Partial differentiation and Applications (Multi variable calculus)
Functions of several variables: Continuity and Differentiability, Partial derivatives, total derivatives,
chain rule, Directional derivative, Taylor’s and Maclaurin’s series expansion of functions of two
variables. Jacobians, Functional dependence, maxima and minima of functions of two variables,
method of Lagrange multipliers, Differentiation under the integral sign (Liebntiz’s rule)

UNIT V: Multiple Integrals (Multi variable Calculus)

Double integrals, triple integrals, change of order of integration, change of variables to polar, cylindrical
and spherical coordinates. Finding areas (by double integrals) and volumes (by double integrals and triple
integrals).

Text books:
1) Higher Engineering Mathematics, B. S. Grewal, Khanna Publishers, 2017, 44th Edition
2) Advanced Engineering Mathematics, Erwin Kreyszig, John Wiley & Sons, 2018, 10th Edition.
Reference Books:

1) Thomas Calculus, George B. Thomas, Maurice D. Weir and Joel Hass, Pearson Publishers, 2018,
14th Edition.
2) Advanced Engineering Mathematics, R. K. Jain and S. R. K. Iyengar, Alpha Science International
Ltd., 2021 5th Edition(9th reprint).
3) Advanced Modern Engineering Mathematics, Glyn James, Pearson publishers, 2018, 5th Edition.
4) Advanced Engineering Mathematics, Micheael Greenberg, Pearson publishers, 9th edition
5) Higher Engineering Mathematics, H. K Das, Er. Rajnish Verma, S. Chand Publications,2014,
Third Edition (Reprint 2021
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P) INDIA

B. Tech. – I Year I Semester

(Common to EEE, ECE, CSE)
Subject code Title of the Subject L T P C
Basic Civil & Mechanical
23A11301 3 0 0 3
Engineering

Course Objectives:
• Get familiarized with the scope and importance of Civil Engineering sub-divisions.
• Introduce the preliminary concepts of surveying.
• Acquire preliminary knowledge on Transportation and its importance in nation’s economy.
• Get familiarized with the importance of quality, conveyance and storage of water.
• Introduction to basic civil engineering materials and construction techniques.

Course Outcomes: On completion of the course, the student should be able to:
• CO1: Understand various sub-divisions of Civil Engineering and to appreciate their role in
ensuring better society.
• CO2: Know the concepts of surveying and to understand the measurement of distances,
angles and levels through surveying.
• CO3: Realize the importance of Transportation in nation's economy and the engineering
measures related to Transportation.
• CO4: UnderstandtheimportanceofWaterStorageandConveyanceStructuressothatthe
social responsibilities of water conservation will be appreciated.
• CO5: Understand the basic characteristics of Civil Engineering Materials and attain
knowledge on prefabricated technology.

(PART A) BASIC CIVIL ENGINEERING

UNIT I
Basics of Civil Engineering: Role of Civil Engineers in Society- Various Disciplines of Civil
Engineering-Structural Engineering Geo-Technical Engineering- Transportation Engineering-
Hydraulics and Water Resources Engineering - Environmental Engineering-Scope of each discipline-
Building Construction and Planning-Construction Materials-Cement-Aggregate- Bricks- Cement
concrete- Steel. Introduction to Prefabricated construction Techniques.
UNIT II
Surveying: Objectives of Surveying- Horizontal Measurements-Angular Measurements- Introduction
to Bearings Levelling instruments used for leveling -Simple problems on levelling and bearings-Contour
mapping.

UNIT III
Transportation Engineering Importance of Transportation in Nation's economic development- Types of
Highway Pavements- Flexible Pavements and Rigid Pavements - Simple Differences. Basics of Harbour,
Tunnel, Airport, and Railway Engineering.
Water Resources and Environmental Engineering: Introduction, Sources of water- Quality of water-
Specifications- Introduction to Hydrology–Rainwater Harvesting-Water Storage and Conveyance Structures
(Simple introduction to Dams and Reservoirs).

Textbooks:
1. Basic Civil Engineering, M.S. Palanisamy, Tata McGraw Hill publications (India) Pvt. Ltd.
Fourth Edition.
2. Introduction to Civil Engineering, S.S. Bhavikatti, New Age International Publishers. 2022.
First Edition.
3. Basic Civil Engineering, Satheesh Gopi, Pearson Publications, 2009, First Edition.

Reference Books:
1. Surveying, Vol- I and Vol-II, S.K. Duggal, Tata McGraw Hill Publishers 2019. Fifth
Edition.
2. Hydrology and Water Resources Engineering, Santosh Kumar Garg, Khanna Publishers,
Delhi.2016
3. Irrigation Engineering and Hydraulic Structures - Santosh Kumar Garg, Khanna Publishers,
Delhi 2023. 38thEdition.
4. Highway Engineering, S.K. Khanna, C.E.G. Justo and Veeraraghavan, Nemchandand
Brothers Publications 2019. 10thEdition.
5. Indian Standard DRINKING WATER — SPECIFICATION IS10500-2012.
 PART B: BASIC MECHANICAL ENGINEERING
Course Objectives: The students after completing the course are expected to
• Get familiarized with the scope and importance of Mechanical Engineering in different
sectors and industries.
• Explain different engineering materials and different manufacturing processes.
• Provide an overview of different thermal and mechanical transmission systems and introduce
basics of robotics and its applications.

Course Outcomes: On completion of the course, the student should be able to

• CO1: Understand the different manufacturing processes.
• CO2: Explain the basics of thermal engineering and its applications.
• CO3: Describe the working of different mechanical power transmission systems.
• CO4: Describe the working of different power plants.
• CO5: Describe the basics of robotics and its applications.

UNIT I

Introduction to Mechanical Engineering: Role of Mechanical Engineering in Industries and Society-

Technologies in different sectors such as Energy, Manufacturing, Automotive, Aerospace, and Marine sectors.
Engineering Materials - Metals-Ferrous and Non-ferrous, Ceramics, Composites, Smart materials.

UNIT II

Manufacturing Processes: Principles of Casting, Forming, joining processes, Machining,

Introduction to CNC machines, 3D printing, and Smart manufacturing.

Thermal Engineering – working principle of oilers, Otto cycle, Diesel cycle, Refrigeration and air-
conditioning cycles, IC engines, 2-Stroke and 4-Stroke engines, SI/CI Engines, Components of
Electric and Hybrid Vehicles.

UNIT III

Power plants – working principle of Steam, Diesel, Hydro, Nuclear power plants.
Mechanical Power Transmission - Belt Drives, Chain, Rope drives, Gear Drives and their applications.
Introduction to Robotics - Joints & links, configurations, and applications of robotics
.
(Note: The subject covers only the basic principles of Civil and Mechanical Engineering systems.
The evaluation shall be intended to test only the fundamentals of the subject)

Textbooks:

1. Internal Combustion Engines by V. Ganesan, By Tata McGraw Hill publications (India)

Pvt.Ltd.
2. A Tear book of Theory of Machines by S.S. Rattan, Tata McGraw Hill Publications, (India)
Pvt.Ltd.
3. An introduction to Mechanical Engg by Jonathan Wicker and Kemper Lewis, Cengage
learning India Pvt.Ltd.

Reference Books:

1. Appuu Kuttan KK, Robotics, I.K. International Publishing House Pvt. Ltd. Volume-I
2. 3D printing & Additive Manufacturing Technology- L. Jyothish Kumar, Pulak M Pandey,
Springer publications
3. Thermal Engineering by Mahesh M Rathore Tata McGraw Hill publications (India)Pvt.
Ltd.
4. G. Shanmugam and M.S. Palanisamy, Basic Civil and the Mechanical Engineering, Tata
McGraw Hill publications (India) Pvt. Ltd.
Mapping between Course Outcomes and Programme Outcomes

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 ✓ ✓ ✓
CO2 ✓ ✓ ✓
CO3 ✓ ✓ ✓
CO4 ✓ ✓ ✓
CO5 ✓ ✓
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P) INDIA

B. Tech. – I Year I Semester

(Common to All Branches)
Subject code Title of the Subject L T P C
23A10501 Introduction to Programming 3 0 0 3

Course Objectives:
• To introduce students to the fundamentals of computer programming.
• To provide hands-on experience with coding and debugging.
• To foster logical thinking and problem-solving skills using programming.
• To familiarize students with programming concepts such as data types, control structures,
functions, and arrays.
• To encourage collaborative learning and teamwork in coding projects.

Course Outcomes: A student after completion of the course will be able to

• CO1: Understand basics of computers, the concept of algorithm and algorithmic thinking.
• CO2: Analyze a problem and develop an algorithm to solve it.
• CO3: Implement various algorithms using the C programming language.
• CO4: Understand more advanced features of C language.
• CO5: Develop problem-solving skills and the ability to debug and optimize the code.

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3
CO1 1 1 1 1 1 1
CO2 1 2 1 1 1
CO3 2 2 1 1 1
CO4 2 1 1 1 1
CO5 2 2 1 1 1

UNIT I: Introduction to Programming and Problem Solving

History of Computers, Basic organization of a computer: ALU, input-output units, memory, program
counter, Introduction to Programming Languages, Basics of a Computer Program- Algorithms,
flowcharts (Using Dia Tool), pseudo code. Introduction to Compilation and Execution, Primitive
Data Types, Variables, and Constants, Basic Input and Output, Operations, Type Conversion, and Casting.
Problem solving techniques: Algorithmic approach, characteristics of algorithm, Problem solving
strategies: Top-down approach, Bottom-up approach, Time and space complexities of algorithms.

UNIT II: Control Structures

Simple sequential programs Conditional Statements (if, if-else, switch), Loops (for, while, do-while)
Break and continue.

UNIT III: Arrays and Strings

Arrays indexing, memory model, programs with array of integers, two dimensional arrays,
Introduction to Strings.
UNIT IV: Pointers & User Defined Data types
Pointers, dereferencing and address operators, pointer and address arithmetic, Dynamic memory
allocation, array manipulation using pointers, User-defined data types-Structures and Unions.

UNIT V: Functions & File Handling

Introduction to Functions, Function Declaration and Definition, Function call Return Types and
Arguments, modifying parameters inside functions using pointers, arrays as parameters. Scope and
Lifetime of Variables, Command line arguments,
Basics of File Handling: why files, file opening and closing a data files, reading and writing a
data file, processing data files.

Note: The syllabus is designed with C Language as the fundamental language of implementation.

Textbooks:
1. "The C Programming Language", Brian W. Kernighan and Dennis M. Ritchie, Prentice-Hall, 1988
2. Schaum’s Outline of Programming with C, Byron S Gottfried, McGraw-Hill Education, 1996

Reference Books:
1. Computing fundamentals and C Programming, Balagurusamy, E., McGraw-Hill Education, 2008.
2. Programming in C, RemaTheraja, Oxford, 2016, 2nd edition
3. C Programming, A Problem-Solving Approach, Forouzan, Gilberg, Prasad, CENGAGE, 3rd edition
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P) INDIA

B. Tech. – I Year I Semester

(Common to EEE, ECE, CSE)
Subject code Title of the Subject L T P C
23A15502 Communicative English Lab 0 0 2 1

Course Objectives:
• The main objective of introducing this course, Communicative English Laboratory, is to expose the
students to a variety of self-instructional, learner friendly modes of language learning.
• The students will get trained in the basic communication skills and also make them ready to face job
interviews.

Course Outcomes:
• CO1: Understand the different aspects of the English language proficiency with emphasis on
LSRW skills.
• CO2: Apply communication skills through various language learning activities.
• CO3: Analyze the English speech sounds, stress, rhythm, intonation and syllable division for
Better listening and speaking comprehension.
• CO4: Evaluate and exhibit professionalism in participating in debates and group discussions.
• CO5: Create effective resume and prepare themselves to face interviews in future.

List of Topics:
1. Vowels & Consonants
2. Neutralization/Accent Rules/Syllable division
3. Communication Skills & JAM
4. Role Play or Conversational Practice
5. E-mail Writing
6. Resume Writing, Cover letter, SOP (Statement of Purpose)
7. Group Discussions – Methods &Practice
8. Debates-Methods & Practice
9. PPT Presentations/Poster Presentation
10. Interviews Skills

Suggested Software:
• Walden Infotech
• Young India Films
• K-Van Solutions
Reference Books:
1. Raman Meenakshi, Sangeeta-Sharma. Technical Communication.OxfordPress.2018.
2. Taylor Grant: English Conversation Practice, Tata McGraw-Hill Education India, 2016
3. Hewing’s, Martin. Cambridge Academic English(B2). CUP, 2012.
4. J. Sethi &P. V. Dhamija. A Course in Phonetics and Spoken English, (2nd Ed)
Kindle,2013.
Web Resources:
Spoken English:
1. www.esl-lab.com
2. www.englishmedialab.com
3. www.englishinteractive.net
4. https://www.britishcouncil.in/english/online
5. http://www.letstalkpodcast.com/
6. https://www.youtube.com/c/mmmEnglish_Emma/featured
7. https://www.youtube.com/c/ArnelsEverydayEnglish/featured
8. https://www.youtube.com/c/engvidAdam/featured
9. https://www.youtube.com/c/EnglishClass101/featured
10. https://www.youtube.com/c/SpeakEnglishWithTiffani/playlists
11. https://www.youtube.com/channel/UCV1h_cBE0Drdx19qkTM0WNw
Voice & Accent:
1. https://www.youtube.com/user/letstalkaccent/videos
2. https://www.youtube.com/c/EngLanguageClub/featured
3. https://www.youtube.com/channel/UC_OskgZBoS4dAnVUgJVexc
4. https://www.youtube.com/channel/UCNfm92h83W2i2ijc5Xwp_IA
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P) INDIA

B. Tech. – I Year I Semester

(Common to EEE, ECE, CSE)
Subject code Title of the Subject L T P C
23A15302 Chemistry Lab 0 0 2 1

Course Objectives: Verify the fundamental concepts with experiments

Course Outcomes: At the end of the course, the students will be able to
• CO1: Determine the cell constant and conductance of solutions.
• CO2: Prepare advanced polymer Bakelite materials.
• CO3: Measure the strength of an acid present in secondary batteries.
• CO4: Analyze the IR spectra of some organic compounds.
• CO5: Calculate strength of acid in Pb-Acid battery.

List of Experiments:

1. Measurement of 10Dq by spectrophotometric method

2. Conductometric titration of strong acid vs. strong base
3. Conductometric titration of weak acid vs. strong base
4. Determination of cell constant and conductance of solutions
5. Potentiometry-determination of redox potential sandemfs
6. Determination of Strength of an acid in Pb-Acid battery
7. pH metric titration of strong Acid Vs Strong Base
8. Preparation of a Bakelite
9. Verify Lambert-Beer’s law
10. Wavelength measurement of sample through UV-Visible Spectro’s copy
11. Identification of simple organic compounds by IR
12. Preparation of nano materials by precipitation method
13. Estimation of Ferrous Iron by Dichrometry

Learning outcomes:
At the end of the course, the students will be able to
• Determine the cell constant and conductance of solutions(L3)
• Prepare advanced polymer Bakelite materials(L2)
• Measure the strength of an acid present in secondary batteries(L3)
• Analyze the IR of some organic compounds(L3)

Reference:
• "Vogel'sQuantitativeChemicalAnalysis6thEdition6thEdition"Pearson Publications by J. Mendham, R.
C. Denney, J. D. Barnes and B. Sivasankar
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P) INDIA

B. Tech. – I Year I Semester

(Common to EEE, ECE, CSE)
Subject code Title of the Subject L T P C
23A10302 Engineering Workshop 0 0 3 1.5

Course Objectives: To familiarize students with wood working, sheet metal operations, fitting and
Electrical house wiring skills
Course Outcomes:
• CO1: Identify works hop tools and their operational capabilities.
• CO2: Practice on manufacturing of components using works hop trades including fitting, carpentry,
foundry and welding.
• CO3: Apply fitting operations in various applications.
• CO4: Apply basic electrical engineering knowledge for House Wiring Practice.
• CO5: Demonstration and Practice of plumbing and welding.

SYLLABUS

1. Demonstration: Safety practices and precautions to be observed in workshop.

2. Wood Working: Familiarity with different types of wood sand tools used in wood
working and make following joints.
a) Half–Lap joint b) Mortise and Ten on joint c) Corner Dovetail joint or bridle
joint d) Demonstration of Power tools
3. Sheet Metal Working: Familiarity with different types of tools used in sheet metal
working, Developments of following sheet metal job from GI sheets.
a) Tapered tray b) Conical funnel c) Elbow pipe d) Brazing
4. Fitting: Familiarity with different types of tools used in fitting and do the
following fitting exercises.
a) V-fit b) Dovetail fit c) Semi-circular fit d) Bicycle tire puncture
and change of two-wheeler tire
5. Electrical Wiring: Familiarity with different types of basic electrical circuits and
make the following connections.
a) Parallel and series b) Two-way switch c) Go down lighting
b) d)Tube light e) Three phase motor f) Soldering of wires
6. Foundry Trade: Demonstration and practice on Molding tools and processes,
Preparation of Green Sand Molds forgiven Patterns.
7. Welding Shop: Demonstration and practice on Arc Welding and Gas
welding. Preparation of Lap joint and Butt joint.
8. Plumbing: Demonstration and practice of Plumbing tools, Preparation of Pipe joints
with coupling for same diameter and with reducer for different diameter
Textbooks:

1. Basic Workshop Technology: Manufacturing Process, Felix W.; Independently

Published, 2019.Workshop Processes, Practices and Materials; Bruce J. Black,
Routledge publishers, 5th Edn.2015.
2. A Course in Workshop Technology Vol I. & II, B.S. Raghuwanshi, Dhanpath Rai &
Co., 2015 &2017.

Reference Books:

1. Elements of Workshop Technology, Vol. I by S.K. Hajra Choudhury &Others,

Media Promoters and Publishers, Mumbai.2007,14thedition
2. Workshop Practice by H.S. Bawa, Tata-McGrawHill,2004.
3. Wiring Estimating, Costing and Contracting; Soni P.M. &Upadhyay P.A.; Atul
Prakashan, 2021-22.

Mapping between Course Outcomes and Programme Outcomes

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 ✓ ✓ ✓ ✓
CO2 ✓ ✓ ✓
CO3 ✓ ✓ ✓
CO4 ✓ ✓ ✓ ✓
CO5 ✓ ✓ ✓ ✓
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P)
INDIA
B. Tech. – I Year I Semester
(Common to All Branches)
Subject code Title of the Subject L T P C
23A10502 Computer Programming Lab 0 0 3 1.5

Course Objectives:
• The course aims to give students hands – on experience and train them on the concepts of the
C- programming language.

Course Outcomes:
• CO1: Read, understand, and trace the execution of programs written in C language.
• CO2: Select the right control structure for solving the problem.
• CO3: Develop C programs which utilize memory efficiently using programming constructs
like pointers.
• CO4: Develop, Debug and Execute programs to demonstrate the applications of arrays,
functions, basic concepts of pointers in C.

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12 PSO1 PSO2 PSO3
CO1 1 1 1 1 1 1
CO2 1 2 1 1 1
CO3 2 2 1 1 1
CO4 2 1 1 1 1
CO5 2 2 1 1 1

UNIT I
WEEK 1
Objective: Getting familiar with the programming environment on the computer and writing
the first program.
Suggested Experiments/Activities:
Tutorial 1: Problem-solving using Computers.
Lab1: Familiarization with programming environment
i) Basic Linux environment and its editors like Vi, Vim & Emacs etc.
ii) Exposure to Turbo C, gcc
iii) Writing simple programs using printf (), scanf ()

WEEK 2
Objective: Getting familiar with how to formally describe a solution to a problem in a
series of finite steps both using textual notation and graphic notation.
Suggested Experiments /Activities:
Tutorial 2: Problem-solving using Algorithms and Flow charts.
Lab 1: Converting algorithms/flow charts into C Source code.
Developing the algorithms/flowcharts for the following sample programs
i) Sum and average of 3 numbers
ii) Conversion of Fahrenheit to Celsius and vice versa
iii) Simple interest calculation
WEEK 3
Objective: Learn how to define variables with the desired data-type, initialize them
with appropriate values and how arithmetic operators can be used with variables and constants.
Suggested Experiments/Activities:
Tutorial 3: Variable types and type conversions:
Lab 3: Simple computational problems using arithmetic expressions.
i) Finding the square root of a given number
ii) Finding compound interest
iii) Area of a triangle using heron’s formulae
iv) Distance travelled by an object

UNIT II
WEEK 4
Objective: Explore the full scope of expressions, type-compatibility of variables &
constants and operators used in the expression and how operator precedence works.
Suggested Experiments/Activities:
Tutorial4: Operators and the precedence and as associativity:
Lab4: Simple computational problems using the operator’ precedence and associativity
i) Evaluate the following expressions.
a. A+B*C+(D*E) + F*G
b. A/B*C-B+A*D/3
c. A+++B---A
d. J= (i++) + (++i)
ii) Find the maximum of three numbers using conditional operator
iii) Take marks of 5 subjects in integers, and find the total, average in float

WEEK 5
Objective: Explore the full scope of different variants of “if construct” namely if-else, null-else,
if-else if*-else, switch and nested-if including in what scenario each one of them can be
used and how to use them. Explore all relational and logical operators while writing
conditionals for “if construct”.
Suggested Experiments/Activities:
Tutorial 5: Branching and logical expressions:
Lab 5: Problems involving if-then-else structures.
i) Write a C program to find the max and min of four numbers using if-else.
ii) Write a C program to generate electricity bill.
iii) Find the roots of the quadratic equation.
iv) Write a C program to simulate a calculator using switch case.
v) Write a C program to find the given year is a leap year or not.

WEEK 6
Objective: Explore the full scope of iterative constructs namely while loop, do-while loop and for
loop in addition to structured jump constructs like break and continue including when
each of these statements is more appropriate to use.
Suggested Experiments/Activities:
Tutorial 6: Loops, while and for loops
Lab 6: Iterative problems e.g., the sum of series
i) Find the factorial of given number using any loop.
ii) Find the given number is a prime or not.
iii) Compute sine and cos series
iv) Checking a number palindrome
v) Construct a pyramid of numbers.
UNIT III

WEEK 7:
Objective: Explore the full scope of Arrays construct namely defining and initializing 1-D and
2-D and more generically n-D arrays and referencing individual array elements from the
defined array. Using integer 1-D arrays, explore search solution linear search.
Suggested Experiments/Activities:
Tutorial 7: 1 D Arrays: searching.
Lab 7:1D Array manipulation, linear search
i) Find the min and max of a 1-D integer array.
ii) Perform linear search on1D array.
iii) The reverse of a 1D integer array
iv) Find 2’s complement of the given binary number.
v) Eliminate duplicate elements in an array.

WEEK 8:
Objective: Explore the difference between other arrays and character arrays that can be
used as Strings by using null character and get comfortable with string by doing
experiments that will reverse a string and concatenate two strings. Explore sorting solution
bubble sort using integer arrays.
Suggested Experiments/Activities:
Tutorial 8: 2 D arrays, sorting and Strings.

Lab 8: Matrix problems, String operations, Bubble sort

i) Addition of two matrices
ii) Multiplication two matrices
iii) Sort array elements using bubble sort
iv) Concatenate two strings without built-in functions
v) Reverse a string using built-in and without built-in string functions

UNIT IV
WEEK9:
Objective: Explore pointers to manage a dynamic array of integers, including memory allocation
& value initialization, resizing changing and reordering the contents of an array and memory de-
allocation using malloc (), calloc (), realloc () and free () functions. Gain experience processing
command-line arguments received by C
Suggested Experiments/Activities:
Tutorial 9: Pointers, structures and dynamic memory allocation
Lab 9: Pointers and structures, memory dereference.
i) Write a C program to find the sum of a 1D array using malloc ()
ii) Write a C program to find the total, average of n students using structures
iii) Enter n students data using calloc () and display failed students list
iv) Read student name and marks from the command line and display the student details
along with the total.
v) Write a C program to implement realloc ()

WEEK 10:
Objective: Experiment with C Structures, Unions, bit fields and self-referential structures
(Singly linked lists) and nested structures
Suggested Experiments/Activities:
Tutorial 10: Bitfields, Self-Referential Structures, Linked lists
Lab10: Bitfields, linked lists
Read and print a date using dd/mm/yyyy format using bit-fields and differentiate the
same without using bit- fields
i) Create and display a singly linked list using self-referential structure.
ii) Demonstrate the differences between structures and unions using a C program.
iii) Write a C program to shift/rotate using bitfields.
iv) Write a C program to copy one structure variable to another structure of the same type.

UNIT V
WEEK 11:
Objective: Explore the Functions, sub-routines, scope and extent of variables, doing some
experiments parameter passing using call by value. Basic methods of numerical integration

Suggested Experiments/Activities:
Tutorial 11: Functions, call by value, scope and extent,
Lab 11: Simple functions using call by value, solving differential equations using Eulers theorem.
i) Write a C function to calculate NCR value.
ii) Write a C function to find the length of a string.
iii) Write a C function to transpose of a matrix.
iv) Write a C function to demonstrate numerical integration of differential equations using
Euler’s method

WEEK 12:
Objective: Explore how recursive solutions can be programmed by writing recursive functions that
can be invoked from the main by programming at-least five distinct problems that have naturally
recursive solutions.
Suggested Experiments/Activities:
Tutorial 12: Recursion, the structure of recursive calls
Lab 12: Recursive functions
i) Write a recursive function to generate Fibonacci series.
ii) Write a recursive function to find the lcm of two numbers.
iii) Write a recursive function to find the factorial of a number.
iv) Write a C Program to implement Ackermann function using recursion.
v) Write a recursive function to find the sum of series.

WEEK 13:
Objective: Explore the basic difference between normal and pointer variables, Arithmetic operations
Using pointers and passing variables to functions using pointers
Suggested Experiments/Activities:
Tutorial 13: Call by reference, dangling pointers
Lab 13: Simple functions using Call by reference, Dangling pointers.
i) Write a C program to swap two numbers using call by reference.
ii) Demonstrate Dangling pointer problem using a C program.
iii) Write a C program to copy one string into another using pointer.
iv) Write a C program to find no of lowercase, uppercase, digits and other characters
using pointers.

WEEK14:
Objective: To understand data files and file handling with various file I/O functions. Explore the
differences between text and binary files.
Suggested Experiments/Activities:
Tutorial 14: File handling
Lab 14: File operations
i) Write a C program to write and read text into a file.
ii) Write a C program to write and read text into a binary file using fread () and fwrite ()
 iii) Copy the contents of one file to another file.
iv) Write a C program to merge two files into the third file using command-line arguments.
v) Find no. of lines, words and characters in a file
vi) Write a C program to print last n characters of a given file.

Textbooks:
1. Ajay Mittal, Programming in C: A practical approach, Pearson.
2. Byron Gottfried, Schaum ' s Outline of Programming with C, McGraw Hill

Reference Books:
1. Brian W. Kernighan and Dennis M. Ritchie, The C Programming Language, Prentice-
Hall of India
2. C Programming, A Problem-Solving Approach, Forouzan, Gilberg, Prasad, CENGAGE
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P)
INDIA

B. Tech. – I Year I Semester

(Common to EEE, ECE, CSE)
Subject code Title of the Subject L T P C
Health and Wellness Yoga and
23A15901 0 0 1 0.5
Sports

Course Objectives:
• The main objective of introducing this course is to make the students maintain their mental
and physical wellness by balancing emotions in their life. It mainly enhances the essential
traits required for development of the personality.

Course Outcomes: After completion of the course the student will be able to
• CO1: Understand the importance of yoga and sports for Physical fitness and sound health
• CO2: Demonstrate an understanding of health-related fitness components
• CO3: Compare and contrast various activities that help enhance their health
• CO4: Assess current personal fitness levels.
• CO5: Develop Positive Personality

SYLLABUS

UNIT I
Concept of health and fitness, Nutrition and Balanced diet, basic concept of immunity Relationship
Between diet and fitness, Globalization and its impact on health, Body Mass Index (BMI) of all age
groups.
Activities:
i) Organizing health awareness programmes in community
ii) Preparation of health profile
iii) Preparation of chart for balanced diet for all age groups

UNITII
Concept of yoga, need for and importance of yoga, origin and history of yoga in Indian
context, classification of yoga, Physiological effects of Asanas- Pranayama and meditation,
stress management and yoga, Mental health and yoga practice.

Activities:
Yoga practices–Asana, Kriya, Mudra, Bandha, Dhyana, Surya Namaskar
 UNITIII
Concept of Sports and fitness, importance, fitness components, history of sports, Ancient and
Modern Olympics, Asian games and Common wealth games.

Activities:
i) Participation in one major game and one individual sport viz., Athletics, Volleyball,
Basketball, Handball, Football, Badminton, Kabaddi, Kho-kho, Table tennis, Cricket
etc. -Practicing general and specific warm up, aerobics
ii) Practicing cardio respiratory fitness, treadmill, run test, 9minwalk, skipping and running.

Reference Books

1. Gordon Edlin, EricGolanty.HealthandWellness,14thEdn. Jones & Bartlett Learning,2022

2. T.K.V. Desi achar. The Heart of Yoga: Developing a Personal Practice
3. Archie J. Bahm. Yoga Sutras of Patanjali, Jain Publishing Company, 1993.
4. Wiseman, John Lofty, SAS Survival Handbook: The Ultimate Guide to Surviving Anywhere
Third Edition, WilliamMorrowPaperbacks,2014
5. The Sports Rules Book/ Human Kinetics with Thomas Hanlon. --3rd ed. Human Kinetics,
Inc.2014

General Guidelines:
1. Institutes must assign lots in the Timetable for the activities of Health/Sports/Yoga.
2. Institutes must provide field/facility and offer the minimum of five
choices of as many as Games/Sports.
3. Institutes are required to provide sports instructor/yoga teacher to mentor the students.

Evaluation Guidelines:
1. Evaluated for a total of 100 marks.
2. A student can select 6 activities of his/her choice with a minimum of 01
activity per unit. Each activity shall be evaluated by the concerned teacher
for 15 marks, totaling to 90 marks.
3. A student shall be evaluated by the concerned teacher for 10 marks by conducting viva-
voce on the subject.
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY ANANTAPUR
COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU– 515 002 (A.P) INDIA

I B. TECH (R23) – II SEMESTER

(Common to EEE, ECE, & CSE)

Subject Code Title of the Subject L T P C

23A25201 ENGINEERING PHYSICS 3 0 0 3
PREAMBLE
There has been an exponential growth of knowledge in the recent past opening up new areas
and challenges in the understanding of basic laws of nature. This helped to the discovery of new
phenomena in macro, micro and nano scale device technologies. The laws of physics play a key role
in the development of science, engineering and technology. Sound knowledge of physical principles
is of paramount importance inunderstanding new discoveries, recent trends and latest developments
in the field of engineering.

To keep in pace with the recent scientific advancements in the areas of emerging
technologies, the syllabi has been thoroughly revised keeping in view of the basic needs of all
branches of Engineering by including the topics like Physical Optics, Dielectric and Magnetic
materials, Crystallography and X-ray Diffraction, Quantum Mechanics, Free Electron Theory,
Semiconductors and superconductors.
COURSE
OBJECTIVES
Bridging the gap between the Physics in school at 10+2 level and UG level engineering
1 courses.
To identify the importance of the optical phenomenon i.e. interference, diffraction and
2 polarization related to its Engineering applications
Enlighten the periodic arrangement of atoms in Crystalline solids by Bragg’s law –
3 Learning the structural analysis through X-ray diffraction techniques.
Enlightenment of the concepts of Quantum Mechanics and to provide fundamentals of de
4 Broglie matter waves, quantum mechanical wave equation and its application, the
importance of free electron theory for metals.

5 To Understand the Physics of Semiconductors and their working mechanism, Concepts

utilization of transport phenomenon of charge carriers in semiconductors. To give an
impetus on the subtle mechanism of superconductors using the concept of BCS theory
and their fascinating applications.
To explain the significant concepts of dielectric and magnetic materials that leads to
6. potentialapplications in the emerging micro devices.
 COURSE
OUTCOMES
Explain the need of coherent sources and the conditions for sustained interference (L2).
CO1 Identify the applications of interference in engineering (L3). Analyze the differences
between interference and diffraction with applications (L4). Illustrate the concept of
polarization of light and its applications (L2). Classify ordinary refracted light and
extraordinary refracted rays by their states of polarization (L2)
Interpret various crystal systems (L2) and Analyze the characterization of materials by
CO2 XRD (L4). Identify the important properties of crystals like the presence of long-range
order and periodicity, structure determination using X-ray diffraction technique (L3).
Analysis of structure of the crystals by Laue’s method (L2).
Describe the dual nature of matter (L1). Explain the significance of wave function (L2).
CO3 Identify the role of Schrodinger’s time independent wave equation in studying particle in
one- dimensional infinite potential well (L3). Identify the role of classical and quantum
free electron theory in the study of electrical conductivity (L3).

CO4 Classify the crystalline solids (L2).Outline the properties of charge carriers in
semiconductors (L2). Identify the type of semiconductor using Hall effect (L2). Classify
superconductors based on Meissner’s effect (L2). Explain Meissner’s effect, BCS theory
& Josephson effect in superconductors (L2).
Explain the concept of dielectric constant and polarization in dielectric materials (L2).
CO5 Summarize various types of polarization of dielectrics (L2). Interpret Lorentz field and
Claussius-Mosotti relation in dielectrics (L2). Classify the magnetic materials based on
susceptibility (L2).
Unit-I: Wave Optics 12hrs
Interference- Principle of superposition – Interference of light – Conditions for sustained interference
- Interference in thin films (Reflection Geometry) – Colors in thin films – Newton’s Rings –
Determination of wavelength and refractive index.

Diffraction- Introduction – Fresnel and Fraunhofer diffraction – Fraunhofer diffraction due to single
slit, double slit and N-slits (qualitative) – Diffraction Grating - Dispersive power and resolving power
of Grating (Qualitative).

Polarization- Introduction – Types of polarization – Polarization by reflection, refraction and double

refraction - Nicol’s Prism - Half wave and Quarter wave plates.
Unit II: Crystallography and X-ray diffraction 8hrs
Crystallography: Space lattice, Basis, Unit Cell and lattice parameters – Crystal systems Bravais
Lattices –– Coordination number - Packing fraction of SC, BCC & FCC - Miller indices –
Separationbetween successive (h k l) planes.
X- ray diffraction: Bragg’s law - X-ray Diffractometer – Crystal structure determination by
Laue’s method.

Unit-III: Quantum Mechanics and Free Electron Theory 9hrs

Quantum Mechanics: Dual nature of matter – Heisenberg’s Uncertainty Principle - Schrodinger’s

time independent and dependent wave equation – Significance and properties of wave function –
Particle in a one-dimensional infinite potential well.
Free Electron Theory- Classical free electron theory (Qualitative with discussion of merits and
demerits) – Quantum free electron theory – Equation for electrical conductivity based on quantum
free electron theory – Fermi-Dirac distribution – Fermi energy - Failures of free electron theory.

Unit – IV: Semiconductors and Superconductors 8hrs

Semiconductors: Formation of energy bands – classification of crystalline solids - Intrinsic

semiconductors: Density of charge carriers – Electrical conductivity – Fermi level – Extrinsic
semiconductors: density of charge carriers - Drift and diffusion currents – Einstein’s equation - Hall
effect and its Applications.

Superconductors: Introduction – Properties of superconductors – Meissner effect– Type I and Type

II superconductors – AC and DC Josephson effects – BCS theory (qualitative treatment) – High Tc
superconductors – Applications of superconductors.

Unit–V: Dielectric and Magnetic Materials 8hrs

Dielectric Materials- Introduction – Dielectric polarization – Dielectric polarizability, Susceptibility

and Dielectric constant and Displacement Vector – Relation between the electric vectors - Types of
polarizations- Electronic (Quantitative), Ionic (Quantitative) and Orientation polarizations
(Qualitative) -Lorentz field - Clausius-Mossotti equation - Dielectric loss.
Magnetic Materials- Introduction – Magnetic dipole moment – Magnetization – Magnetic
susceptibility and Permeability – Atomic origin of magnetism – Classification of magnetic materials:
Dia, Para, Ferro, Ferri & Antiferro – Domain concept of Ferromagnetism (Qualitative) – Hysteresis –
Soft and Hard magnetic materials.

Text books:
1. Engineering Physics by M. N. Avadhanulu, P.G. Kshirsagar & TVS Arun Murthy
S.ChandPublications, 11th Edition 2019.
2. Engineering Physics” by D.K. Bhattacharya and Poonam Tandon, Oxford press (2018).

Reference Books:
1. “Engineering Physics” - B.K. Pandey and S. Chaturvedi, Cengage Learning
2. “Fundamentals of Physics” - Halliday, Resnick and Walker, John Wiley &Sons.
3. “Fundamentals of Physics with Applications”, Arthur Beiser, Samarjit Sengupta, Schaum
Series.
4. “Engineering Physics” - Shatendra Sharma, Jyotsna Sharma, Pearson Education, 2018.
5. “Engineering Physics” - Sanjay D. Jain, D. Sahasrabudhe and Girish, University Press.
6. “Semiconductor physics and devices: Basic principle” - A. Donald, Neamen, Mc GrawHill.
7. “Solid state physics” – A.J.Dekker , Pan Macmillan publishers
8. “Introduction to Solid State Physics” -Charles Kittel ,Wiley
 Mapping between Course Outcomes and Programme
Outcomes

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 3 1
CO2 3 3 2 1
CO3 3 2
CO4 3 3 3 2 1
CO5 3 3 2 2 1
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR

COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU –515 002 (A.P) INDIA

I B. TECH (R23) – II SEMESTER

(Common to All Branches of Engineering)

Subject Code Title of the Subject L T P C

23A25101 DIFFERENTIAL 3 0 0 3
EQUATIONS AND
VECTOR CALCULUS

Course Objectives:

• To enlighten the learners in the concept of differential equations and multivariable calculus.
• To furnish the learners with basic concepts and techniques at plus two level to lead
them intoadvanced level by handling various real-world applications.
Course Outcomes: At the end of the course, the student will be able to

CO1: Solve the differential equations related to various engineering fields.

CO2: Identify solution methods for partial differential equations that model physical
processes.
CO3: Interpret the physical meaning of different operators such as gradient, curl and
divergence.
CO4: Estimate the work done against a field, circulation and flux using vector calculus.

UNIT I Differential equations of first order and first degree

Linear differential equations – Bernoulli’s equations- Exact equations and equations reducible to
exact form. Applications: Newton’s Law of cooling – Law of natural growth and decay orthogonal
Trajectories,Electrical circuits.

UNIT II Linear differential equations of higher order (Constant Coefficients)

Definitions, homogenous and non-homogenous, complimentary function, general solution, particular

integral, Wronskian, Method of variation of parameters. Simultaneous linear equations,Equations
reducibleto Linear Differential equations with constant coefficients (Caushy’s equation, Lagendre’s
equation) Applications to L-C-R Circuit problems and Simple Harmonic motion.

UNIT III Partial Differential Equations

Introduction and formation of Partial Differential Equations by elimination of arbitrary constants

and arbitrary functions, solutions of first order linear equations using Lagrange’s method.
Homogeneous Linear Partial differential equations with constant coefficients, Non-linear partial
differential equations (Standardforms)
UNIT IV Vector differentiation

Scalar and vector point functions, vector operator Del, Del applies to scalar point functions-Gradient,
Directional derivative, del applied to vector point functions-Divergence and Curl, physical
interpretation, examples and vector identities.

UNIT V Vector integration

Line integral-circulation-work done, surface integral-flux, Green’s theorem in the plane (without
proof), Stoke’s theorem (without proof), volume integral, Divergence theorem (without proof)
physical interpretation and related problems.
Textbooks:

1) Higher Engineering Mathematics, B. S. Grewal, Khanna Publishers, 2017, 44th Edition

2) Advanced Engineering Mathematics, Erwin Kreyszig, John Wiley & Sons, 2018, 10th Edition.
Reference Books:

1) Thomas Calculus, George B. Thomas, Maurice D. Weir and Joel Hass, Pearson
Publishers, 2018,14th Edition.
2) Advanced Engineering Mathematics, Dennis G. Zill and Warren S. Wright, Jones and Bartlett,
2018.
3) Advanced Modern Engineering Mathematics, Glyn James, Pearson publishers, 2018, 5th
Edition.
4) Advanced Engineering Mathematics, R. K. Jain and S. R. K. Iyengar, Alpha Science
InternationalLtd., 2021 5th Edition (9th reprint)
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR

COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU –515 002 (A.P) INDIA

I B. TECH (R23) – II SEMESTER

(Common to EEE, ECE, CSE)

Subject Code Title of the Subject L T P C
23A22401 BASIC ELECTRICAL & 3 0 0 3
ELECTRONICS
ENGINEERING

PART A: BASIC ELECTRICAL ENGINEERING

Course Objectives:
To expose to the field of electrical engineering, laws and principles of electrical engineering and to
acquire fundamental knowledge in the relevant field.
Course Outcomes:
CO1: Remember the fundamental laws, operating principles of motors, generators, MC and MI
instruments (L1)
CO2: Understand the problem solving concepts associated to AC and DC circuits, construction and
operation of AC and DC machines, measuring instruments; different power generation mechanisms,
Electricity billing concept and important safety measures related to electrical operations (L2)
CO3: Apply mathematical tools and fundamental concepts to derive various equations related to
machines, circuits and measuring instruments; electricity bill calculations and layout representation of
electrical power systems (L3)
CO4: Analyze different electrical circuits, performance of machines and measuring instruments (L4)
CO5: Evaluate different circuit configurations, Machine performance and Power systems operation
(L5)

Syllabus

UNIT I DC & AC CIRCUITS

DC Circuits: Electrical circuit elements (R, L and C), Ohm’s Law and its limitations, KCL & KVL,
series, parallel, series-parallel circuits, Super Position theorem, Simple Numerical problems.
AC Circuits: A.C. Fundamentals: Equation of AC Voltage and current, waveform, time period,
frequency, amplitude, phase, phase difference, average value, RMS value, form factor, peak factor,
Voltage and current relationship with phasor diagrams in R, L, and C circuits, Concept of Impedance,
Analysis of R-L, R-C, R-L-C Series circuits, Active power, reactive power and apparent power,
Concept of power factor (Simple Numerical problems).

UNIT II MACHINES AND MEASURING INSTRUMENTS

Machines: Construction, principle and operation of (i) DC Motor, (ii) DC Generator, (iii) Single Phase
Transformer, (iv) Three Phase Induction Motor and (v) Alternator, Applications of electrical machines.
Measuring Instruments: Construction and working principle of Permanent Magnet Moving Coil
(PMMC), Moving Iron (MI) Instruments and Wheat Stone bridge.

UNIT III ENERGY RESOURCES, ELECTRICITY BILL & SAFETY MEASURES

Energy Resources: Conventional and non-conventional energy resources; Layout and operation of
various Power Generation systems: Hydel, Nuclear, Solar & Wind power generation.
Electricity Bill: Power rating of household appliances including air conditioners, PCs, Laptops,
Printers, etc. Definition of “unit” used for consumption of electrical energy, two-part electricity tariff,
calculation of electricity bill for domestic consumers.
Equipment Safety Measures: Working principle of Fuse and Miniature Circuit Breaker (MCB),
merits and demerits. Personal safety measures: Electric Shock, Earthing and its types, Safety
Precautions to avoid shock.

Learning Resources:
Textbooks:
1. Basic Electrical Engineering, D. C. Kulshreshtha, Tata McGraw Hill, 2019, First Edition
2. Power System Engineering, P.V. Gupta, M.L. Soni, U.S. Bhatnagar and A. Chakrabarti,
Dhanpat Rai & Co, 2013
3. Fundamentals of Electrical Engineering, Rajendra Prasad, PHI publishers, 2014, Third Edition

Reference Books:
1. Basic Electrical Engineering, D. P. Kothari and I. J. Nagrath, Mc Graw Hill, 2019, Fourth
Edition
2. Principles of Power Systems, V.K. Mehtha, S.Chand Technical Publishers, 2020
3. Basic Electrical Engineering, T. K. Nagsarkar and M. S. Sukhija, Oxford University Press, 2017
4. Basic Electrical and Electronics Engineering, S. K. Bhatacharya, Person Publications, 2018,
Second Edition.

Web Resources:
1. https://nptel.ac.in/courses/108105053
2. https://nptel.ac.in/courses/108108076
 PART B: BASIC ELECTRONICS ENGINEERING

Course Objectives:
• To teach the fundamentals of semiconductor devices and its applications, principles of digital
electronics.

Course Objectives: At the end of the course, the student will be able to
CO1: Understand the principle of working of diodes, transistors and their characteristics.
CO2: Understand the fundamental concepts of various semiconductor devices in electronic circuits
and instruments.
CO3: Apply the concepts of diodes in rectifiers and regulated power supplies
CO4: Explain the concepts of various number systems and the functionality of logic gates with
Boolean functions.
CO5: Understand the simple combinational circuits and sequential circuits.

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 3 1 1 2 1 2 2
CO2 3 2 2 1 3 2 1 2
CO3 2 1 2 2 1 2
CO4 3 1 1 2 1 2 2
CO5 2 1 2 2 1 2

UNIT I: SEMICONDUCTOR DEVICES

Introduction - Evolution of electronics – Vacuum tubes to nano electronics - Characteristics of PN
Junction Diode — Zener Effect — Zener Diode and its Characteristics. Bipolar Junction Transistor —
CB, CE, CC Configurations and V-I Characteristics, Elementary Treatment of Small Signal CE
Amplifier.

UNIT II: BASIC ELECTRONIC CIRCUITS AND INSTRUMENTTAION

Rectifiers and Power supplies: Block diagram description of a dc power supply, working of a full
wave bridge rectifier, capacitor filter (no analysis), working of simple zener voltage regulator.
Amplifiers: Block diagram of Public Address system, Circuit diagram and working of common emitter
(RC coupled) amplifier with its frequency response.
Electronic Instrumentation: Block diagram of an electronic instrumentation system.

UNIT III: DIGITAL ELECTRONICS

Overview of Number Systems, Logic gates including Universal Gates, BCD codes, Excess-3 code,
Gray code, Hamming code. Boolean Algebra, Basic Theorems and properties of Boolean Algebra,
Truth Tables and Functionality of Logic Gates – NOT, OR, AND, NOR, NAND, XOR and XNOR.
Simple combinational circuits–Half and Full Adders. Introduction to sequential circuits, Flip flops,
Registers and counters (Elementary Treatment only)

Textbooks:
1. SantiramKal, Basic Electronics- Devices, Circuits and IT Fundamentals, Prentice Hall, India,
2002.
2. R. P. Jain, Modern Digital Electronics, 4th Edition, Tata McGraw Hill, 2009

Reference Books:
1. R. L. Boylestad& Louis Nashlesky, Electronic Devices & Circuit Theory, Pearson Education,
2021.
2. R. S. Sedha, A Textbook of Electronic Devices and Circuits, S. Chand & Co, 2010.
3. R. T. Paynter, Introductory Electronic Devices & Circuits – Conventional Flow Version,
Pearson Education,2009.
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR

COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU –515 002 (A.P) INDIA

I B. TECH (R23) – II SEMESTER

(Common to EEE, ECE, CSE)

c Title of the Subject L T P C

23A20301 ENGINEERING 1 0 4 3
GRAPHICS
Course Objectives:
• To enable the students with various concepts like dimensioning,
conventions andstandards related to Engineering Drawing
• To impart knowledge on the projection of points, lines and plane surfaces
• To improve the visualization skills for better understanding of projection of solids
• To develop the imaginative skills of the students required to understand Section of
solidsand Developments of surfaces.
• To make the students understand the viewing perception of a solid object in
Isometricand Perspective projections.

Course Outcomes:

CO1: Understand the principles of engineering drawing, including engineering curves,

scales,orthographic and isometric projections.
CO2: Draw and interpret orthographic projections of points, lines, planes and solids in front,top
and side views.
CO3: Understand and draw projection of solids in various positions in first quadrant.
CO4: Explain principles behind development of surfaces.
CO5: Prepare isometric and perspective sections of simple solids.

UNIT I
Introduction: Lines, Lettering and Dimensioning, Geometrical Constructions and
Constructing regular polygons by general methods.
Curves: construction of ellipse, parabola and hyperbola by general, Cycloids,
Involutes,Normal and tangent to Curves.
Scales: Plain scales, diagonal scales and vernier scales.
UNIT II

Orthographic Projections: Reference plane, importance of reference lines or

Plane,Projections of a point situated in any one of the four quadrants.

Projections of Straight Lines: Projections of straight lines parallel to both reference

planes, perpendicular to one reference plane and parallel to other reference plane, inclined
to one reference plane and parallel to the other reference plane. Projections of Straight
Line Inclined to both the reference planes
Projections of Planes: regular planes Perpendicular to both reference planes, parallel
to one reference plane and inclined to the other reference plane; plane inclined to both
the reference planes.

UNIT III
Projections of Solids: Types of solids: Polyhedra and Solids of revolution.
Projections of solids in simple positions: Axis perpendicular to horizontal plane, Axis
perpendicular to vertical plane and Axis parallel to both the reference planes,
Projection of Solids with axis inclined to one reference plane and parallel to another
plane.
UNIT IV
Sections of Solids: Perpendicular and inclined section planes, Sectional views and
True shape of section, Sections of solids in simple position only.
Development of Surfaces: Methods of Development: Parallel line development and
radial line development. Development of a cube, prism, cylinder, pyramid andcone.
UNIT V

Conversion of Views: Conversion of isometric views to orthographic views;

Conversion of orthographic views to isometric views.
Computer graphics: Creating 2D&3D drawings ofobjects including PCB and
Transformations using Auto CAD (Not for end examination).

Textbook:
1. N. D. Bhatt, Engineering Drawing, Charotar Publishing House, 2016.

Reference Books:

1. Engineering Drawing, K.L. Narayana and P. Kannaiah, Tata McGraw Hill, 2013.
2. Engineering Drawing, M.B.Shah and B.C. Rana, Pearson Education Inc,2009.
3. Engineering Drawing with an Introduction to AutoCAD, Dhananjay
Jolhe, Tata McGraw Hill, 2017.

Mapping between Course Outcomes and Programme Outcomes

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1
CO2
CO3
CO4
CO5
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR

COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU –515 002 (A.P)

INDIA

I B. TECH (R23) – II SEMESTER

Subject Code Title of the Subject L T P C

23A20502 Data Structures 3 0 0 3

Course Objectives:
• Toprovidetheknowledgeofbasicdatastructuresandtheirimplementations.
• To understand importance of data structures in context of writing efficient
programs.
• Todevelopskillstoapplyappropriatedatastructuresinproblemsolving.

Course Outcomes: At the end of the course, Student will be able to

CO1: Explain the role of linear data structures in organizing and
accessing data efficiently in algorithms.
CO2: Design, implement, and apply linked lists for dynamic data storage,
demonstrating understanding of memory allocation.
CO3: Develop programs using stacks to handle recursive algorithms,
manage program states, and solve related problems.
CO4: Apply queue-based algorithms for efficient task scheduling and
breadth-first traversal in graphs and distinguish between deques and
priority queues, and apply the map appropriately to solve data
management challenges.
CO5: Devise novel solutions to small scale programming challenges
involving data structures such as stacks, queues, Trees.
CO6: Recognize scenarios where hashing is advantageous, and design
hash-based solutions for specific problems.
POI PO2 P03 PO PO5 PO6 PO7 PO8 PO POI POI POl PSO PS0 PS0
4 9 O I 2 I 2 3
CO 2 2 2 l 2 1
1
CO2 2 2 2 I 2 I
C03 2 2 2 1 2 1
CO 2 2 2 I 2 2
4
CO5 2 2 1 1 2 1
CO6 2 1 1 1 2 2
 UNITI

Introduction to Linear Data Structures: Definition and importance

of linear data structures, Abstract data types (ADTs) and their
implementation, Overview of time and space complexity analysis for
linear data structures. Searching Techniques: Linear & Binary Search,
Sorting Techniques: Bubble soi1, Selection sort, Insertion Sort

UNITII
Linked Lists: Singly linked lists: representation and operations, doubly linked
lists and circular linked lists, Comparing arrays and linked lists, Applications of
linked lists

UNITIII
Stacks: Introduction to stacks: properties and operations, implementing stacks using
arrays and Applications of stacks

UNIT IV
Queues: Introduction to queues: properties and operations, implementing
queues using arrays and linked lists, Applications of queues in breadth-first
search, scheduling, etc.
Deques: Introduction to deques (double-ended queues), Operations on deques
and their applications.

UNIT IV
Graphs: Introduction, Graphs technology, Directed Graphs and Representation of Graphs
Trees: Introduction to Trees, Binary search Tree- Insertion, Deletion &Traversal
Hashing: Brief introduction to hashing and hash functions, Collision
resolution techniques: chaining and open addressing, Hash tables: basic
implementation and operations, Applications of hashing in unique
identifier generation, caching, etc.

Textbooks:
1. Data Structures and algorithm analysis in C, Mark Allen W eiss, Pearson,2ndEdition.
2. Fundamentals of data structures in C, Ellis Horowitz, SartajSahni,
Susan Anderson- Freed, Silicon Press, 2008

Reference Books:
1. Algorithms and Data Structures: The Basic Toolbox by Kurt Mehlhorn and Peter
Sanders
2. C Data Structures and Algorithms by Alfred V. Aho, Jeffrey D. Ullman,
and John E. Hopcroft
3. Problem Solving with Algorithms and Data Structures "by Brad Miller and David
Ranum
4. Introduction to Algorithms by Thomas H. Cormen, Charles E. Leiserson,
Ronald L. Rivest, and Clifford ·Stein
5. Algorithms in C, Parts 1-5 (Bundle): Fundamentals, Data Structures,
Sorting, Searching, and Graph Algorithms "by Robert Sedgewick
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR

COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU –515 002 (A.P) INDIA

I B. TECH (R23) – II SEMESTER

(Common to EEE, ECE &CSE)

Subject Code Title of the Subject L T P C

23A25202 ENGINEERING 0 0 2 1
PHYSICS LAB

Course Objectives:

➢ Understands the concepts of interference, diffraction and their applications.

➢ Understand the role of optical fiber parameters in communication.
➢ Recognize the importance of energy gap in the study of conductivity and
Hall Effect in a semiconductor.
➢ Illustrates the magnetic and dielectric materials applications.
➢ Apply the principles of semiconductors in various electronic devices.

(Any TEN of the following listed experiments)

(Out of which any TWO experiments may be conducted in virtual mode)

List of Engineering Physics Experiments

1. Determination of radius of curvature of a given plano convex lens by Newton’s rings.

2. Determination of wavelengths of different spectral lines in mercury
spectrum usingdiffraction grating in normal incidence configuration.
3. Determination of dispersive power of prism.
4. Verification of Brewster’s law
5. Determination of the resistivity of semiconductor by four probe method.
6. Determination of energy gap of a semiconductor using p-n junction diode.
7. Determination of Hall voltage and Hall coefficient of a given
semiconductor using Halleffect.
8. Determination of dielectric constant using charging and discharging method.
9. Study the variation of B versus H by magnetizing the magnetic material (B-H curve).
10. Magnetic field along the axis of a current carrying circular coil by
Stewart & Gee’sMethod.
11. Determination of wavelength of Laser light using diffraction grating.
12. Estimation of Planck’s constant using photoelectric effect.
13. Determination of temperature coefficients of a thermistor.
14. Determination of acceleration due to gravity and radius of
Gyration by using acompoundpendulum.
15. Determination of rigidity modulus of the material of the given wire using Torsional pendulum.
16. Sonometer: Verification of laws of stretched string.
17. Determination of young’s modulus for the given material of wooden
 scale by non-uniformbending (or double cantilever) method.
18. Determination of Frequency of electrically maintained tuning fork by Melde’sexperiment.

Course Outcomes:
The students will be able to

➢ Operate optical instruments like microscope and spectrometer (L2)

➢ Estimate the wavelength of different colors using diffraction grating
and resolvingpower(L2)
➢ Plot the intensity of the magnetic field of circular coil carrying current with distance
(L3)
➢ Determine the resistivity of the given semiconductor using four probe method (L3)
➢ Identify the type of semiconductor i.e., n-type or p-type using hall effect (L3)
➢ Calculate the band gap of a given semiconductor (L3)

PO PO PO3 PO PO PO6 PO7 PO8 PO9 PO1 PO1 PO1

1 2 4 5 0 1 2
CO1 3 2

CO2 3 2 2

CO3 3 1 2

CO4 3 3 3 2

CO5 3

References: 1. S. Balasubramanian, M.N. Srinivasan “A Text book of Practical

Physics”- SChand Publishers, 2017.

• URL:www.vlab.co.in
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR

COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU –515 002 (A.P) INDIA

I B. TECH (R23) – II SEMESTER

(Common to EEE, ECE, CSE)

Subject Code Title of the Subject L T P C

23A20501 IT WORK SHOP 0 0 2 1

Course Objectives:

• To introduce the internal parts of a computer, peripherals, I/O ports, connecting cables
• To demonstrate configuring the system as Dual boot both Windows and other
Operating SystemsViz. Linux, BOSS
• To teach basic command line interface commands on Linux.
• To teach the usage of Internet for productivity and self-paced life-long learning
• To introduce Compression, Multimedia and Antivirus tools and Office Tools
such as Wordprocessors, Spread sheets and Presentation tools.
Course Outcomes:
CO1: Perform Hardware troubleshooting.
CO2: Understand Hardware components and inter
dependencies.
CO3: Safeguard computer systems from
viruses/worms.
CO4: Document/ Presentation
preparation. CO5: Perform
calculations using spreadsheets.

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO1 PO1 PO1 PSO PSO PSO
0 1 2 1 2 3
CO1 1 2 1
CO2
CO3 1 2
CO4 2 2 2
CO5 1 2

PC Hardware & Software Installation

Task 1: Identify the peripherals of a computer, components in a CPU and its functions. Draw
the blockdiagram of the CPU along with the configuration of each peripheral and submit to your
instructor.
 Task 2: Every student should disassemble and assemble the PC back to working condition.
Lab instructors should verify the work and follow it up with a Viva. Also students need to
go through the video which shows the process of assembling a PC. A video would be given
as part of the course content.

Task 3: Every student should individually install MS windows on the personal computer.
Lab instructorshould verify the installation and follow it up with a Viva.

Task 4: Every student should install Linux on the computer. This computer should have
windows installed. The system should be configured as dual boot (VMWare) with both
Windows and Linux. Labinstructors should verify the installation and follow it up with a
Viva

Task 5: Every student should install BOSS on the computer. The system should be
configured as dual boot (VMWare) with both Windows and BOSS. Lab instructors should
verify the installation and followit up with a Viva
Internet & World Wide Web
Task1: Orientation & Connectivity Boot Camp: Students should get connected to their Local
Area Network and access the Internet. In the process they configure the TCP/IP setting. Finally
students shoulddemonstrate, to the instructor, how to access the websites and email. If there
is no internet connectivity preparations need to be made by the instructors to simulate the
WWW on the LAN.

Task 2: Web Browsers, Surfing the Web: Students customize their web browsers with the
LAN proxy settings, bookmarks, search toolbars and pop up blockers. Also, plug-ins like
Macromedia Flash and JREfor applets should be configured.

Task 3: Search Engines & Netiquette: Students should know what search engines are and
how to use thesearch engines. A few topics would be given to the students for which they
need to search on Google. This should be demonstrated to the instructors by the student.

Task 4: Cyber Hygiene: Students would be exposed to the various threats on the internet and
would be asked to configure their computer to be safe on the internet. They need to customize
their browsers to block pop ups, block active x downloads to avoid viruses and/or worms.

LaTeX and WORD

Task 1 – Word Orientation: The mentor needs to give an overview of La TeX and Microsoft
(MS) office or equivalent (FOSS) tool word: Importance of La TeX and MS office or
equivalent (FOSS) tool Word as word Processors, Details of the four tasks and features that
would be covered in each, Using La TeXandword – Accessing, overview of toolbars, saving
files, Using help and resources, rulers, format painter inword.

Task 2: Using La TeX and Word to create a project certificate. Features to be covered:-
Formatting Fonts in word, Drop Cap in word, Applying Text effects, Using Character
Spacing, Borders and Colors, Inserting Header and Footer, Using Date and Time option in
both La TeX and Word.

Task 3: Creating project abstract Features to be covered:-Formatting Styles, Inserting table,

Bullets and Numbering, Changing Text Direction, Cell alignment, Footnote, Hyperlink,
Symbols, Spell Check, TrackChanges.

Task 4: Creating a Newsletter: Features to be covered:- Table of Content, Newspaper

columns, Images from files and clipart, Drawing toolbar and Word Art, Formatting Images,
Textboxes, Paragraphs and Mail Merge in word.
EXCEL
Excel Orientation: The mentor needs to tell the importance of MS office or equivalent
(FOSS) tool Excel as a Spreadsheet tool, give the details of the four tasks and features that
would be covered in each.Using Excel – Accessing, overview of toolbars, saving excel files,
Using help and resources.
Task 1: Creating a Scheduler - Features to be covered: Gridlines, Format Cells, Summation,
auto fill, Formatting Text

Task 2: Calculating GPA -. Features to be covered:- Cell Referencing, Formulae in excel –

average, std.deviation, Charts, Renaming and Inserting worksheets, Hyper linking, Count
function,
LOOKUP/VLOOKUP
Task 3: Split cells, freeze panes, group and outline, Sorting, Boolean and logical operators,
Conditionalformatting
POWER POINT
Task 1: Students will be working on basic power point utilities and tools which help them
create basic power point presentations. PPT Orientation, Slide Layouts, Inserting Text, Word
Art, Formatting Text, Bullets and Numbering, Auto Shapes, Lines and Arrows in
PowerPoint.
Task 2: Interactive presentations - Hyperlinks, Inserting –Images, Clip Art, Audio, Video,
Objects, Tables and Charts.
Task 3: Master Layouts (slide, template, and notes), Types of views (basic, presentation,
slide slotter, notes etc), and Inserting – Background, textures, Design Templates, Hidden
slides.
AI TOOLS – ChatGPT
Task 1: Prompt Engineering: Experiment with different types of prompts to see how the model
responds. Try asking questions, starting conversations, or even providing incomplete
sentences to see how the model completes them.
• Ex: Prompt: "You are a knowledgeable AI. Please answer the following question:
What is the capital of France?"

Task 2: Creative Writing: Use the model as a writing assistant. Provide the beginning of a
story or a description of a scene, and let the model generate the rest of the content. This can
be a fun way to brainstorm creative ideas
• Ex: Prompt: "In a world where gravity suddenly stopped working, people started
floatingupwards. Write a story about how society adapted to this new reality."
Task 3: Language Translation: Experiment with translation tasks by providing a sentence in
one language and asking the model to translate it into another language. Compare the output
to see how accurate and fluent the translations are.
• Ex:Prompt: "Translate the following English sentence to French: 'Hello, how are you
doing today?'"
Reference Books:
2. Comdex Information Technology course tool kit, Vikas Gupta, WILEY Dream tech, 2003
3. The Complete Computer upgrade and repair book, Cheryl A Schmidt, WILEY Dream
tech, 2013, 3rdedition
4. Introduction to Information Technology, ITL Education Solutions limited, Pearson
Education, 2012,2nd edition
5. PC Hardware - A Handbook, Kate J. Chase, PHI (Microsoft)
6. LaTeX Companion, Leslie Lamport, PHI/Pearson.
7. IT Essentials PC Hardware and Software Companion Guide, David Anfins on and Ken
Quamme. –CISCO Press, Pearson Education, 3rd edition
IT Essentials PC Hardware and Software Labs and Study Guide, Patrick Regan– CISCO Press,
PearsonEducation, 3rd edition
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR

COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU –515 002 (A.P) INDIA

I B. TECH (R23) – II SEMESTER

(Common to EEE, ECE &CSE)
Subject Code Title of the Subject L T P C
23A12402 ELECTRICALAND 0 0 3 1.5
ELECTRONICS
ENGINEERING WORK
SHOP

Course Objectives:
To impart knowledge on the fundamental laws & theorems of electrical circuits, functions of electrical
machines and energy calculations.

Course Outcomes:
CO1: Understand the Electrical circuit design concept; measurement of resistance, power, power factor;
concept of wiring and operation of Electrical Machines and Transformer (L2)
CO2: Apply the theoretical concepts and operating principles to derive mathematical models for
circuits, Electrical machines and measuring instruments; calculations for the measurement of resistance,
power and power factor (L3)
CO3: Apply the theoretical concepts to obtain calculations for the measurement of resistance, power
and
power factor (L3)
CO4: Analyze various characteristics of electrical circuits, electrical machines and measuring
instruments (L4)
CO5: Design suitable circuits and methodologies for the measurement of various electrical parameters;
Household and commercial wiring (L5)

List of Experiments:
1. Verification of KCL and KVL
2. Verification of Superposition theorem
3. Measurement of Resistance using Wheat stone bridge
4. Magnetization Characteristics of DC shunt Generator
5. Measurement of Power and Power factor using Single-phase wattmeter
6. Measurement of Earth Resistance using Megger
7. Calculation of Electrical Energy for Domestic Premises
Learning Resources:
Reference books:
1. Basic Electrical Engineering, D. C. Kulshreshtha, Tata McGraw Hill, 2019, First Edition
2. Power System Engineering, P.V. Gupta, M.L. Soni, U.S. Bhatnagar and A. Chakrabarti,
Dhanpat Rai & Co, 2013
3. Fundamentals of Electrical Engineering, Rajendra Prasad, PHI publishers, 2014, Third Edition
 PART B: ELECTRONICS ENGINEERING LAB

Course Objectives:
• To impart knowledge on the principles of digital electronics and
fundamentals of electron devices& its applications.

Course Outcomes: At the end of the course, the student will be able to
CO1: Identify and testing of various electronic components.
CO2: Understand the usage of electronic measuring instruments.
CO3: Plot and discuss the characteristics of various electron devices.
CO4: Explain the operation of a digital circuit.

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1 2 3 2 1 2 1 1
CO2 2 2 2 1 1 2
CO3 2 2 3 1 1
CO4 2 1 2 2 1

List of Experiments:
1. Determine and Demonstrate V-I characteristics of PN Junction diode:
(a) Forward bias (b) Reverse bias.
2. Determine and Demonstrate V – I characteristics of Zener Diode and its application
as voltage Regulator.
3. Implementation of half wave and full wave rectifiers
4. Determine and Demonstrate Input & Output characteristics of BJT in
CE& CB configurations
5. Frequency response of CE amplifier.
6. Simulation of RC coupled amplifier with the design supplied
7. Verification of Truth Table of AND, OR, NOT, NAND, NOR, Ex-OR, Ex-NOR
Gatesusing ICs.
8. Verification of Truth Tables of S-R, J-K& D flip flops using respective ICs.

Tools / Equipment Required: DC Power supplies, Multi meters, DC Ammeters,

DC Voltmeters, AC Voltmeters, CROs, all the required active devices.
References:
1. R. L. Boylestad & Louis Nashlesky, Electronic Devices & Circuit Theory,
Pearson Education, 2021.
2. R. P. Jain, Modern Digital Electronics, 4th Edition, Tata McGraw Hill, 2009
3. R. T. Paynter, Introductory Electronic Devices & Circuits – Conventional Flow
Version, Pearson Education,2009.

Note: a. Minimum Six Experiments to be performed.

b. All the experiments shall be implemented using both Hardware and Software.
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR

COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU –515 002 (A.P) INDIA

I B. TECH (R23) – II SEMESTER

Subject Code Title of the Subject L T P C

23A20503 DATA STRUCTURES 0 0 3 1.5
LAB

Course Objectives:
The course aims to strength then the ability of the students to identify and apply
the suitable data structure for the given real-world problem. It enables them to gain
knowledge in practical applications of data structures.
Course Outcomes: At the end of the course, Student will be able to

COl: Explain the role of linear data structures inorganizing and accessing data efficiently
in algorithms.
CO2: Design, implement, and apply linked lists for dynamic data storage, demonstrating
understanding of memory allocation.
CO3: Develop programs using stacks to handle recursive algorithms, manage program
states, and solve related problems.
CO4: Apply queue-based algorithms for efficient task scheduling and breadth-first
traversal in graphs and distinguish between deques and priority queues and apply the map
appropriately to solve data management challenges.
CO5: Recognize scenarios where hashing is advantageous, and design hash-based
solutions for specific problems.
POI P02 P03 PO PO PO PO PO8 PO POI POII PO1 PSO PSO PSO3
4 5 6 7 9 0 2 I 2
COl 2 2 2 1 . 2 1
CO2 2 2 2 I 2 I
CO2 2 2 2 1 2 ]
CO4 2 2 2 ] 2 2
CO5 2 2 2 1 2 2

List of Experiments:
Exercise1:ArrayManipulation
i) Write a program to reverse an array.
ii) C Programs to implement the Searching Techniques -Linear &Binary Search
iii) C Programs to implement Sorting Techniques-Bubble, Selection and Insertion Sort
Exercise2: Linked List Implementation
i) Implement a singly linked list and perform insertion and deletion operations.
ii) Develop a program to reverse a linked list iteratively and recursively.
iii) Solve problems involving linked list traversal and manipulation.

Exercise3: Linked List Applications

i) Create a program to detect and remove duplicates from a linked list.
 ii) Implement a linked list to represent polynomials and perform addition.
iii) Implement a double-ended queue(deque)with essential operations.
Exercise4: Double Linked List Implementation
i) Implement a doubly linked list and perform vanous operations to understand its
properties and applications.
ii) Implement a circular linked list and perform insertion, deletion, and traversal.

Exercise5: Stack Operations

i) Implement a stack using arrays and linked lists.
ii) Write a program to evaluate a postfix expression using a stack.
iii) Implement a program to check for balanced parentheses using a stack.

Exercise6: Queue Operations

i) Implement a queue using array sand linked lists.
ii) Develop a program to simulate a simple printer queue system.
iii) Solve problems involving circular queues.

Exercise7: Stack and Queue Applications

i) Use a stack to evaluate an infix expression and convert it to postfix.
ii) Create a program to determine whether a given string is a palindrome or not.
iii) Implement a stack or queue to perform comparison and check for symmetry.

Exercises: Binary Search Tree

i) Implementing a BST using Linked List.
ii) Traversing of BST.

Exercise9: Hashing
i) Implement a hash table with collision resolution techniques.
ii) Write a program to implement a simple cache using hashing.

Textbooks:
1. Data Structures and algorithm analysis in C, Mark Allen Weiss, Pearson,2ndEdition.
2. Fundamentals of data structures in C, Ellis Horowitz, Sartaj Sahni, Susan Anderson-
Freed, Silicon Press, 2008

Reference Books:
1. Algorithms and Data Structures: The Basic Tool box by Kurt Mehlhorn and Peter Sanders
2. C Data Structures and Algorithms by Alfred V. Aho, Jeffrey D. Ullman, and John
E. Hopcroft
3. Problem Solving with Algorithms and Data Structures" by Brad Miller and David Ranum
4. Introduction to Algorithms by Thomas H. Cormen, Charles E. Leiserson, Ronald L.
Rivest, and Clifford Stein
5. Algorithms in C, Parts 1-5(Bundle): Fundamentals, Data Structures,
Sorting, Searching, and Graph Algorithms by Robert Sedgewick.
 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR

COLLEGE OF ENGINEERING (AUTONOMOUS)ANANTHAPURAMU –515 002 (A.P) INDIA

I B. TECH (R23) – II SEMESTER

(Common to EEE, ECE &CSE)

Subject Code Title of the Subject L T P C

23A25902 NSS/NCC/SCOUTS & 0 0 1 0.5
GUIDES/COMMUNITY
SERVICE

Course Objectives:

The objective of introducing this course is to impart discipline, character, fraternity,

teamwork, socialconsciousness among the students and engaging them in selfless service.

Course Outcomes: After completion of the course the students will be able to

CO1: Understand the importance of discipline, character and service motto.

CO2: Solve some societal issues by applying acquired knowledge, facts, and techniques

CO3: Explore human relationships by analysing social problems

CO4: Determine to extend their help for the fellow beings and downtrodden people

CO5: Develop leadership skills and civic responsibilities.

SYLLABUS
UNIT I Orientation
General Orientation on NSS/NCC/ Scouts & Guides/Community Service activities, Career guidance.
Activities:
i) Conducting –ice breaking sessions-expectations from the course-knowing
personal talents and skills
ii) Conducting orientation programs for the students –future plans-activities-
releasing road map etc.
iii) Displaying success stories-motivational biopics- award winning movies on societal issues etc.
iv) Conducting talent show in singing patriotic songs-paintings- any other contribution.
UNIT II Nature & Care

Activities:
i) Best out of waste competition.
ii) Poster and signs making competition to spread environmental awareness.
iii) Recycling and environmental pollution article writing competition.
iv) Organizing Zero-waste day.
v) Digital Environmental awareness activity via various social media platforms.
vi) Virtual demonstration of different eco-friendly approaches for sustainable living.
vii) Write a summary on any book related to environmental issues.

UNIT III Community Service

Activities:
i) Conducting One Day Special Camp in a village contacting village-area leaders-
Surveyin the village, identification of problems- helping them to solve via media-
authorities-experts-etc.
ii) Conducting awareness programs on Health-related issues such as General Health,
Mental health, Spiritual Health, HIV/AIDS,
iii) Conducting consumer Awareness. Explaining various legal provisions etc.
iv) Women Empowerment Programmes- Sexual Abuse, Adolescent Health and
PopulationEducation.
v) Any other programmes in collaboration with local charities, NGOs etc.

Reference Books:
1. Nirmalya Kumar Sinha & Surajit Majumder, A Text Book of National Service Scheme Vol;.I,
Vidya Kutir Publication, 2021 ( ISBN 978-81-952368-8-6)
2. Red Book - National Cadet Corps – Standing Instructions Vol I & II, DirectorateGeneral
of NCC, Ministry of Defence, New Delhi
3. Davis M. L. and Cornwell D. A., Introduction to Environmental Engineering,McGraw Hill,
New York 4/e 2008
4. Masters G. M., Joseph K. and Nagendran R. Introduction to EnvironmentalEngineering
and Science, Pearson Education, New Delhi. 2/e 2007
5. Ram Ahuja. Social Problems in India, Rawat Publications, New Delhi.

General Guidelines:
1. Institutes must assign slots in the Timetable for the activities.
2. Institutes are required to provide instructor to mentor the students.

Evaluation Guidelines:
1. Evaluated for a total of 100 marks.
2. A student can select 6 activities of his/her choice with a minimum of 01 activity per unit. Each
activity shall be evaluated by the concerned teacher for 15 marks, totaling to 90 marks.
3. A student shall be evaluated by the concerned teacher for 10 marks by conducting
vivavoce on the subject.