Project:-Rehabilitation of Aba'Ala General Hospital

PROJECT:- REHABILITATION OF ABA'ALA GENERAL HOSPITAL
: CONSTRUCTION OF RESERVOIR AND RELATED WORKS
OWNER: - ABA'ALA GENERAL HOSPITAL
LOCATION: - ABA'ALA ,AFAR, ETHIOPIA
February, 2024
PREPARED BY: BATI MENGESHA OLI

Project :-Rehabilitation of Abala General Hospital
Owner:- Abala General Hospital
Location:- Aba'ala, Afar, Ethiopia
Stake Holders : -Expertise France Groupe AFD
Contractor:-
Construction of reservoir and related works
Item no. Description of works Amount (Euro)
1 100 m3 Capacity Service Reservoir Construction

2 Generator House Construction
3 Supply and Installation of Pump and Generator
4 Supply and installation of Pipe line and fittings
5 Fence and Site work
Total
Vat (15 %)
GRAND TOTAL
100 m3 Capacity Reservoir Construction 1

Contractor:-
1. 100 m3 Capacity Service Reservoir Construction
A. SUBSTRUCTURE
1 Excavation and Earth work

2 Concrete work
3 Masonry work
Sum A
B. SUPER-STRUCTURE
1 Concrete Work
2 Finishing Work
3 Pipes, fittings, valves, and accessories
4 Testing and commissioning
Sum B
Sum A+B
Rebate (…….%)
Total
Vat (15 %)
GRAND TOTAL

Contractor:-
Amount
Item no. Description Unit QTY Rate (Euro)
(Euro)
Note :- All materials specified on the drawing is subjected to
the engineer approval prior to production and installation work.
A. SUBSTRUCTURE
1 1. EXCAVATION AND EARTH WORK
Clear of the site to remove top soil and vegetable materials for
1.1 the reservoir, valve room and surrounding pavement with
2
drain areasto an average depth of 20cm. m 125.00
Bulk excavation in ordinary soil (medium stiff to stiff, reddish

1.2 brown high plastic clayey silt) to an average depth not more
than 150 cm from stripped level. m3 164.00
1.3 Ditto as item no. 1.3 but for foundation in soft rock m3 25.00
1.4 Ditto as item no. 1.3 but for foundation in hard rock m3 25.00
Provide, Backfill back fill and compact selected granular

material under excavated area of reservoir, valve room ,
surrounding pavement. Selected material shall be non-
1.5
expansive granular selected material fill with maximum PI
value of 12, well compacted in layers of 20 cm by sprinkling
water to ensure a proctor density of 95%. m3 164.00
Cart away surplus excavated material and deposit at a

1.6 suitable place (a permitted location) outside the compound not
more than 20 Km m3 189.00
25 cm thick basaltic or equivalent stone hard-core well rolled,

1.7 2
consolidated and blinded with crushed stone. m 36.00
Carried to Summery
2. CONCRETE WORK
10 cm thick lean concrete under the reservoir foundation, slab,

2.1 valve room, pavement and drain in class 15 with minimum
2
cement content of 150 kg/m3 m 81.00
Cast 10 cm thick mass concrete in C-20 for surrounding

pavement and drain , of cement /m3 of concrete filled in to
2.2
formwork and vibrated around reinforcements. Formwork and
reinforcements shall be measured separately. m2 24.00

Contractor:-
Amount
(Euro)
Cast RC concrete in C-30 with OPC of grade 42.5 N or above
(with minimum 28-days 15cm cube compressive strength of
30MPa), 430kg of cement /m3 of concrete & filled in to
2.3 formwork and vibrated around reinforcements. Formwork and
reinforcements shall be measured separately; for all sub-
structural part of reservoir and valve room members
m3 16.00
Provide, cut and fix in position steel panel or its equivalent

formwork or equivalent to get fair face concrete for structural
2.4
sections of the reservoir, valve room, and surrounding
pavement and etc. m2 19.00
Provide steel reinforcements bar reinforcement steel bars of

grade S-400 (400MPa) to the service reservoir, box outs and
2.5 valve room for dia. >6mm according to the drawing, price shall
include cutting, bending, placing in position, using tying wires
and spacers.
2.5.1 F 12 mm deformed bar. Kg 464.00
Carried to Summery
3. MASONRY WORKS
Supply and construct 200.00mm thick grade-A hollow concrete

3.1 block wall with cement mortar of 1:3 ration for the valve room
walls m2 64.00
Carried to Summery
B. SUPER-STRUCTURE
1. CONCRETE WORK
Cast RC concrete in C-30 with OPC of grade 42.5 N or above

(with minimum 28-days 15cm cube compressive strength of
30MPa), 430kg of cement /m3 of concrete & filled in to
1.1 formwork and vibrated around reinforcements. Formwork and
reinforcements shall be measured separately; for all super-
structural parts of reservoir and valve room members
m3 44.00
Provide, cut and fix in position steel panel or its equivalent

1.2 formwork or equivalent to get fair face concrete for structural
sections of the reservoir, valve room and etc. m2 201.00

Contractor:-
Amount
(Euro)
Steel reinforcements bar with minimum yield strength of
400MPa for dia. >6mm according to the drawing, price shall
1.3
include cutting, bending, placing in position, using tying wires
and spacers.
a F 8 mm deformed bar. Kg -
b F 10 mm deformed bar. Kg 1,749.00
c F 12 mm deformed bar. Kg 2,988.00
d F 14 mm deformed bar. Kg -
e F 16 mm deformed bar. Kg 56.00
Carried to Summery
2. FINISHING WORK
Apply minimum 50.0mm thick cement screening of C-30

concrete of fine aggregate to the top slab of the reservoir and
2.1
valve room floor. The minimum slope of the top slab screening
shall be 1.0% for storm water drainage. m2 44.00
Apply two coats of cement sand plastering with 1:3 ratio to

2.2 minimum 25 mm thick to the internal and external walls of the
reservoir and valve room m2 192.00
Apply two coats of cement sand mortar rendering with 1:3 ratio
2.3
to all external walls of the reservoir and valve room m2 76.00
Provide 250 mm wide polyvinyl chloride (PVC water stop plate

) or its equivalent leakage stopping layer to the reservoir wall,
2.4 slab, and foundation joints and at every construction lifts in the
wall. Sample must be approved by the engineer
m 150.00
Provide polysulphide joint sealant 50mmx25mm or its

2.5
equivalent to reservoir floor slab and wall m 150.00
Apply water proofing plastic membrane or its equivalent at the

2.6
surface of the top slab cement screening m2 44.00
2.7 Ditto to item 2.6 but to the buried portions of the valve room m2 4.00
Sika or equivalent water proofing material to internal Reservoir

2.8 floor, internal wall and internal surface of Roof slab. Sample
2
must be approved by the engineer m 76.00
Supply and install 1 1/2 inch stainless steel ladder for internal
2.9 access and with all accessories on the details as shown on
the working drawing LS 1.00

Contractor:-
Amount
(Euro)
Supply and install 1 1/2-inch stainless steel ladder for external
2.10 ladder, safety cage and with all accessories as shown on the
details of the working drawing LS 1.00
Carried to Summery
3. PIPES, FITTINGS, VALVES, AND ACCESSORIES
Supply and install 4-inch diameter and 1 m high galvanized

3.1
iron pipe with cap for reservoir ventilation No 4.00
Supply and install 2-inch galvanized iron drain pipes with 0.5m
3.2
length for the top of the reservoir No 4.00
Supply and install 3.0mm thick and 80 cmX 80 cm galvanized

3.3 steel sheet man way cover for the reservoir with 40x40x 2 mm
angle iron frame and safety lock No 1.00
Install inlet, outlet, drain, overflow, vent pipe and other

3.4 accessories and fittings as per the pipe work detail drawing.
LS 1.00
Carried to Summery
TESTING AND COMMISSIONING
Test the reservoir for water tightness and disinfect with

calcium hypochlorite solution of adequate dose before
commissioning LS 1.00
Carried to Summery

Contractor:-
2. Generator House Construction
A. SUBSTRUCTURE

2 Concrete work
3 Masonry work
Sum A
B. SUPER-STRUCTURE
1 Concrete Work
2 Block work
3 Roof Work
4 Metal and Steel Structure Work
5 Plastering and Painting Work
6 Paving and Flooring
7 Painting
Sum B
Sum A+B
Rebate (…….%)
Total
Vat (15 %)
GRAND TOTAL
Generator House Construction 1

Contractor:-
Item no. DESCRIPTION UNIT QTY Unit Rate Amount
Generator House Construction
A. SUB-STRUCTURE
1. EXCAVATION AND EARTH WORK
1.1 Clear of the site to remove top soil and vegetable materials to an average
2
depth of 20cm. m 49.00
1.2 Bulk excavation in ordinary soil (medium stiff to stiff, reddish brown high
plastic clayey silt) to an average depth not more than 150 cm from stripped
3
level. m 24.00
1.3 Provide, Backfill back fill and compact selected granular material under
excavated area and around masonry . Selected material shall be non-
expansive granular selected material fill with maximum PI value of 12, well
compacted in layers of 20 cm by sprinkling water to ensure a proctor density
3
of 95%. m 27.00
1.4 Cart away surplus excavated material and deposit at a suitable place outside
3
the compound. m 34.00
25 cm thick basaltic or equivalent stone hard-core well rolled, consolidated

1.5
and blinded with crushed stone. m2 16.00
Carried to Summery
2. CONCRETE WORK
2.1 5cm thick lean concrete in C-5, 150kg of cement/m3 of concrete under:
a Under masonry wall m2 8.00

b Under ground slab m2 16.00
c Foundation Pads m2 4.00
2.2 Concrete in C-25 with OPC of grade 42.5N or above (with minimum 28-
days 15cm cube compressive strength of 25MPa), 360kg of cement /m3 of
concrete & filled in to formwork and vibrated around reinforcements.
Formwork and reinforcements shall be measured separately.
a In foundation pads and column m3 2.00

b In ground floor beams m3 2.00
2.3 Concrete in C-20 , 320kg of cement /m3 of concrete & filled in to formwork
and vibrated around reinforcements. Formwork and reinforcements shall be
measured separately.
a In RC slab m3 3.00

3
b In RC ramps m 1.00
2.4 Provide, cut and fix in position sawn wooden formwork or equivalent to get
fair face concrete
2
a To foundation pads and column m 10.00
2
b To ground floor beams m 7.00
c To ramp m2 4.00
2.6 Steel reinforcements bar with minimum yield strength of 450MPa for dia.
>6mm according to the drawing, price shall include cutting, bending, placing
in position, using tying wires and spacers.
a F 8 mm deformed bar. kg 114.00

b F 10 mm deformed bar. kg -
c F 12 mm deformed bar. kg 36.00
d F 14 mm deformed bar. kg -
Carried to Summary
3. MASONRY WORKS
3.1 50cm thick basaltic or equivalent stone masonry foundation below NGL,
3
bedded and jointed in cement and sand mortar, 1:4. m 12.00
3.2 Ditto as item no. 3.1 but above NGL m3 8.00
3.3 Construct half ditch 30 cm diameter with C-20 as shown on drawings. ml 5.00
3.4 Construct C-20 concrete manholes for surface water drainage as where
shown on the drawing with reinforced concrete wall ( diameter 10 Center to
Center 200mm both ways horizontal and vertical) and bottom slab complete
with medium concrete manhole cover ,benching and all assistance civil
works. price shall include 6 meter circular RC pipe to connect from manhole
to manhole
Size :- 50x50x80cm
No 2.00
3.5 Supply, cut and fix in position 100x10mm chip wood or Styrofoam as joint
separator between basement beam and basement floor slab. m 16.00
Carried to Summary
B. SUPER-STRUCTURE
1. CONCRETE WORK
concrete filled in to formwork and vibrated around reinforcements. Formwork
and reinforcements shall be measured separately.
a In elevation columns m3 1.00

b In top tie beams m3 2.00
fair face concrete
a In elevation columns m2 5.00

b In top tie beams m2 16.00


d F 14 mm deformed bar. kg 64.00
Carried to Summary
2. BLOCK WORK
2.1 Supply and lay 20cm thick hollow concrete block wall in Class-C in cement-
sand mortar 1:4 and both sides left for plastering.
m2 48.00
Carried to Summary
3. ROOFING WORK
3.1 Fix Roof cover in EGA - 400, 0.5mm thick fixed to RHS purlins with standard
hooks and washers. Roof cover measured in horizontal projection. Price
includes ridge cover, two coats of anti rust & two coats of metal paint and all
the necessary material and workmanship to make the work complete.
m2 20.00
3.2 Supply & fix G-28 galvanized flat metal sheet gutter of dev. Length 660mm
spliced at joints and painted two coat of anti-rust and two coats of metal
paint. m 5.00
3.3 Supply and fix diam.110mm uPVC down pipe. Price shall include fixing
accessories in every 80 cm interval. m 8.00
Carried to Summary
4. METAL AND STEEL STRUCTURE WORK
Supply and fix truss made of steel structure placed for generator house as
shown on the drawing. Joints shall be well welded. Price shall include two
coats of anti rust and two coats of metallic paint. Price shall also include all
the necessary material, labor and any incidental civil work required for secure
installation and make all the system complete.
All materials specified on the drawing is subjected to the engineer approval
prior to production and installation work.
4.1 Truss, Purlin and pillar support
a) Size:- 60 x 40 x 2 mm kg 133.00
b) Size:- 40 x 40 x 2 mm kg 76.00
4.2 Plate and J bolt
a Size:- 2(400x250x5)mm No 4.00
b J- bolts Grade 5.6, Size:- 4 Ø 16 L=300mm

No 4.00

4.3 Supply and fix genertor house metal grilled door made of RHS size 60x40x2
mm thick horizontal and vertical frame as shown on the drawing. The door
consists of 20x20x2mm RHS interior vertical direction frames at 15cm
maximum interval and anchor bars where necessary. Price shall includes
hooks for pad lock, anchoring bolts, lock and handles, and other necessary
accessories for completing the work as shown on the drawing,
Price shall also include two coats of anti rust paint and spray paint finish in
chosen color.
Size: 200X260cm.
No 1.00
4.7 Supply and fix 38 mm metal LTZ section window frame 1 mm grooved metal
sheet cover fixed metal louver as shown on the drawing. The door consists of
anchor bars where necessary. Price shall includes hooks for pad lock,
anchoring bolts, lock and handles, and other necessary accessories for
completing the work as shown on the drawing,
Price shall also include two coats of anti rust paint and spray paint finish in
chosen color.
Size: 300X200cm. No 2.00
Carried to Summary
5. PLASTERING Work
5.1 Apply two coats of plaster in cement sand mortar 1:3 to internal and external
2
HCB wall and concrete surface. m 72.00
Carried to Summary
6. PAVING AND FLOORING
6.1 Cast minimum 5cm thick cement sand screed to ground floor slab of
generator house. m2 16.00
Carried to Summary
7. PAINTING
7.1 Apply Three coats of plastic paint to exposed plastered surface according to
manufacturers instruction. Material color to be approved by designer prior to
application. Price shall include all incidental works thereto.
m2 72.00
Carried to Summary

Contractor:-
3. Supply and Installation of Pump and Generator
Option -1
1 Supply and Installation of Pump and Generator
Sum
Rebate (…….%)
Total
Vat (15 %)
GRAND TOTAL
Supply and Installation of Pump and Generator 1

Contractor:-
Item DESCRIPTION
UNIT QTY Unit Rate Amount Remark
no.
3. Supply and Installation of Pump and Generator
Option -1
Supply and Installation of Rewindable Submersible pump electric motor

400V/50Hz, three phase squirrel cage, induction type A connected, 21.5KW.
16 bar working pressure gauge capacity complete as specified. with Discharge,
(Q=5.5l/sec & Head, H=200m
1
•Power Cable 25mm2 Length 200m
-Electrode Cable 1 .5mm Length 500m
-Electrode sensor 2pcs
-Cable Joint Kit (Volcanizer) G T-3 Set 1.00
Standby indoor diesel generator set, type Caterpillar or similar equivalent, of 1x60 kVA,
400/230V,50Hz, 3- phase,0.8power factor,1500rpm,sound attenuater enclosure,
producing the net rated power at an altitude of minimum 2400m above sea level,
relative humidity of 80% and ambient temperature of 25 degree centigrade, mounted on
a common vibration controlled base frame and supplied with starter, 12V batteries,
engine instrument and control panel incorporating ammeters, voltmeter, phase
selector switch, engine start/stop push button, instrument fuses and circuit
breakers complete with cable termination,tropical grade wiring Additionally 500
litters fuel tank made of 3mm mild steel sheet to be supplied complete with air vent,
drain pipe inlet, hand pump, engine feed piping and manhole on top cover, manufacturer
2 recommended spare parts adequate for 3 years, usual maintenance, repairs,
replacement and wear/tear to be included in the scope of supply giving a full and
comprehensive list of such parts and their quantities.
The supply shall also include:
-maintenance tools,
-necessary safety guards,
-manuals for spare parts, instructions and operation,-fully dimensioned mounting and
foundation drawings,
-and performance warranty which should not be less 1 year.
Set 1.00
Main Switchgear within generat.or house completc, consisting of EEPCO/generating set
3 manual changeover switch panel and distribution panel, including all protection, metering
relays, controls, surge- diverters, glands, contactors, etc. as specified
Ls 1.00
Main control panel 22kw st.arting impedcncc(DOL) (Tcrmcrmal Protcccted,Dry runging
4
protection,Phase failure and Over Voltage and Under Volta e Protection Ls 1.00
Supply and install 4 HP/3KW Surface pump with dry running protection and all other
5 accessories to lift water from the Ground reservoir to the existing elevated water tanker.
The pump shall conform to an ISO 5199 (and ISO 2858). No 1.00
Supply and installation of best quality float switch to the existing elevated water tank with
6
cables and connections to the surface pump for the existing No 1.00
Carried to Summery

Option -2
Supply and Installation of Rewindable Submersible pump electric motor

400V/50Hz, three phase squirrel cage, induction type A connected, 18.33KW.
16bar working pressure gauge capacity complete as specified. with Discharge, Alterbnative
(Q=5.5l/sec & Head, H=170m
1 Rate Only option which will
•Power Cable 25mm2 Length 180m be instracted by
-Electrode Cable 1 .5mm Length 450m the Engineer
-Electrode sensor 2pcs Note:-Price rating
-Cable Joint Kit (Volcanizer) G T-3 Set 1 is Mandatory
Standby indoor diesel generator set, type Caterpillar or similar equivalent, 50KVA, 3 Alterbnative
phase 400V with all its required accessories option which will
-Air cleaner 2 pcs be instracted by
2 Rate Only
-Feul tilter 2pcs the Engineer
-Fan belt 2pcs Note:-Price rating
-Small tool box set Set 1 is Mandatory.
Main Switchgear within generator house complete, consisting of EEPCO/generating set Alterbnative
manual changeover switch panel and distribution panel, including all protection, metering option which will
relays, controls, surge- diverters, glands, contactors, etc. as specified be instracted by
3 Rate Only
the Engineer
Note:-Price rating
Ls 1 is Mandatory.
Main control panel 19kw st.arting impedcncc(DOL) (Tcrmcrmal Protcccted,Dry runging
Alterbnative
protection,Phase failure and Over Voltage and Under Volta e Protection
option which will
4 Rate Only be instracted by
the Engineer
Note:-Price rating
Ls 1 is Mandatory.

Contractor:-
4. Supply and installation of Pipe line and fittings
1 Supply and installation of Pipe line and fittings
Sum
Rebate (…….%)
Total
Vat (15 %)
GRAND TOTAL
Supply and installation of Pipe line and fittings 1

Contractor:-
Supply and install Class B 3 " GI pipe which conform with ISO
1 1461 standards for the Rising main from the Submersible pump to
the wellhead. ML 200.00
Supply and install Class B 3 " GI pipe which conform with ISO
2 1461 standard fittings for the Rising main from the well head to the
HDPE Riser pipe. ML 12.00
Supply and install 3'' flanged water meter with all the necessary
3 fittings which conform with ISO 4064-1:2014 standard fittings.
NO 1.00
Supply and install 3'' flanged non return valve with all the
4 necessary fittings which conform with ISO 4064-1:2014 standard
fittings. NO 1.00
Construction of 6" flange to well head reduced/clap to take 3" GI

5 pipe connection to the Supply Mains including fittings and
accessories for connection. NO 1.00
6 Supply and Install 3'' GI Elbow NO 5.00
7 Supply and Install 3'' GI coupling NO 5.00
8 Supply and install 3'' nipples NO 2.00
Supply and install PN 20 HDPE 90mm for the riser pipe from the
well head to the Gound reservoir. The price shall include the
9
excavation work up to the depth of 60cm, the back fill, cart away,
and all other necessary works. ML 270.00
10 Supply PN 20 HDPE 90mm Stright union NO 8.00
11 Supply and fix PN 20 HDPE 90mm Tee NO 2.00
12 Supply and fix PN 20 HDPE 90mm female adapter NO 4.00
13 Supply and fix PN 20 HDPE 90mm male adapter NO 4.00
14 Supply and fix PN 20 HDPE 90mm elbow NO 8.00
15 Supply and fix 3'' plug NO 2.00
Supply and fix GI 2" water meter which conforms with ISO 4064-
16
1:2014 standards. NO 1.00
Supply and fix 2'' GI gate valve which conforms with ISO
17
standards. NO 2.00

Contractor:-
18 Supply and fix nipples 2'' NO 8.00
19 Supply and fix 2" GI union NO 1.00
Supply and fix 2'' PPR pipe from ground reservoir to the elevated
20 reservoir, the price shall includes all the necessary fitting.
ML 90.00
21 Supply and fix PPR elbow 2'' NO 8.00
22 Supply and fix PPR 2'' union NO 10.00
23 Supply and fix GI 2'' inch levered type faucet NO 6.00
24 Supply and fix PPR female adapter 50mm NO 4.00
25 Supply and fix PPR male adapter 50mm NO 4.00
Carried to Summary

Contractor:-
5. Fence and Site work
A. SUBSTRUCTURE

2 Concrete work
3 Finishing work
Sum
Rebate (…….%)
Total
Vat (15 %)
GRAND TOTAL
Fence and Site work 1

Contractor:-
Fence and Site work
A. SUB-STRUCTURE
1. EXCAVATION AND EARTH WORK
1.1 Clear of the site to remove top soil and vegetable materials to an average
2
depth of 20cm. m 42.00
1.2 Pit excavation in ordinary soil (medium stiff to stiff, reddish brown high plastic
clayey silt) to an average depth not more than 150 cm from stripped level.
3
m 9.00
1.3 Provide, Backfill back fill and compact selected granular material around
column. Selected material shall be non-expansive granular selected material
fill with maximum PI value of 12, well compacted in layers of 20 cm by
sprinkling water to ensure a proctor density of 95%. m3 9.00
1.4 Cart away surplus excavated material and deposit at a suitable place outside
the compound. m3 18.00
25 cm thick basaltic or equivalent stone hard-core well rolled, consolidated

1.5
and blinded with crushed stone. m2 42.00
Carried to Summery
2. CONCRETE WORK
2.1 5cm thick lean concrete in C-5, 150kg of cement/m3 of concrete under:
a Foundation Pads m2 10.00
concrete & filled in to formwork and vibrated around reinforcements.
Formwork and reinforcements shall be measured separately.
a In foundation pads, columns and walkways m3 15.00
fair face concrete
a To foundation pads and columns m2 88.00

Contractor:-

d F 14 mm deformed bar. kg -
Carried to Summary
3. FINISHING WORKS
3.1 Apply two coats of plaster in cement sand mortar 1:3 to internal and external
HCB wall and concrete surface. m2 80.00
3.2 Apply Three coats of plastic paint to exposed plastered surface according to
manufacturers instruction. Material color to be approved by designer prior to
application. Price shall include all incidental works thereto.
2
m 80.00
3.3 Supply and fix pre cut 2.5 mm thick galvanized wire mesh for fence
compound attached to the RC pillars and supporting angle iron . Price shall
include Angle iron of size 50x2 mm every 2 meter spacing both in horizontal
and vertical side and for the angle iron price shall include 30x30x30 concrete
stand according to the detail drawing. Price shall include two coats of anti
rust and metal paint of angle iron and other accessories to complete the wok
. m
2
93.00
3.4 Supply and fix Geneatour house compound Pedestrian gate metal grilled
door made of RHS size 60x40x2 mm thick horizontal and vertical frame as
shown on the drawing. The door consists of 20x20x2mm RHS interior vertical
direction frames at 15 cm maximum interval and anchor bars where
necessary. Price shall includes hooks for pad lock, anchoring bolts, lock and
handles, and other necessary accessories for completing the work as shown
on the drawing, Price shall also include two coats of anti rust paint and spray
paint finish in chosen colour.
Size: 100X300cm. No 1.00
3.5 Supply and fix Geneatour house compound Main gate metal grilled door
made of RHS size 60x40x2.5mm thick horizontal and vertical frame as
shown on the drawing. The door consists of 20x20x2mm RHS interior vertical
direction frames at 15 cm maximum interval and anchor bars where
necessary. Price shall includes hooks for pad lock, anchoring bolts, lock and
handles, and other necessary accessories for completing the work as shown
on the drawing, Price shall also include two coats of anti rust paint and spray
paint finish in chosen colour.
Size: 400X300cm. No 1.00
Carried to Summary

Project:-Rehabilitation of Aba'Ala General Hospital

Uploaded by

Copyright:

Available Formats

Project:-Rehabilitation of Aba'Ala General Hospital

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Project:-Rehabilitation of Aba'Ala General Hospital

Uploaded by

Copyright:

Available Formats

PROJECT:- REHABILITATION OF ABA'ALA GENERAL HOSPITAL

: CONSTRUCTION OF RESERVOIR AND RELATED WORKS

OWNER: - ABA'ALA GENERAL HOSPITAL

LOCATION: - ABA'ALA ,AFAR, ETHIOPIA

PREPARED BY: BATI MENGESHA OLI

Owner:- Abala General Hospital

Location:- Aba'ala, Afar, Ethiopia

Stake Holders : -Expertise France Groupe AFD

Construction of reservoir and related works

Item no. Description of works Amount (Euro)

1 100 m3 Capacity Service Reservoir Construction

100 m3 Capacity Reservoir Construction 1

Owner:- Abala General Hospital

Location:- Aba'ala, Afar, Ethiopia

Stake Holders : -Expertise France Groupe AFD

1. 100 m3 Capacity Service Reservoir Construction

Item no. Description of works Amount (Euro)

1 Excavation and Earth work

100 m3 Capacity Reservoir Construction 1

Owner:- Abala General Hospital

Location:- Aba'ala, Afar, Ethiopia

Stake Holders : -Expertise France Groupe AFD

1 1. EXCAVATION AND EARTH WORK

Bulk excavation in ordinary soil (medium stiff to stiff, reddish

Provide, Backfill back fill and compact selected granular

Cart away surplus excavated material and deposit at a

25 cm thick basaltic or equivalent stone hard-core well rolled,

10 cm thick lean concrete under the reservoir foundation, slab,

Cast 10 cm thick mass concrete in C-20 for surrounding

100 m3 Capacity Reservoir Construction 2

Owner:- Abala General Hospital

Location:- Aba'ala, Afar, Ethiopia

Stake Holders : -Expertise France Groupe AFD

Provide, cut and fix in position steel panel or its equivalent

Provide steel reinforcements bar reinforcement steel bars of

2.5.1 F 12 mm deformed bar. Kg 464.00

Supply and construct 200.00mm thick grade-A hollow concrete

Cast RC concrete in C-30 with OPC of grade 42.5 N or above

Provide, cut and fix in position steel panel or its equivalent

100 m3 Capacity Reservoir Construction 3

Owner:- Abala General Hospital

Location:- Aba'ala, Afar, Ethiopia

Stake Holders : -Expertise France Groupe AFD

Apply minimum 50.0mm thick cement screening of C-30

Apply two coats of cement sand plastering with 1:3 ratio to

Provide 250 mm wide polyvinyl chloride (PVC water stop plate

Provide polysulphide joint sealant 50mmx25mm or its

Apply water proofing plastic membrane or its equivalent at the

Sika or equivalent water proofing material to internal Reservoir

100 m3 Capacity Reservoir Construction 4

Owner:- Abala General Hospital

Location:- Aba'ala, Afar, Ethiopia

Stake Holders : -Expertise France Groupe AFD

3. PIPES, FITTINGS, VALVES, AND ACCESSORIES

Supply and install 4-inch diameter and 1 m high galvanized

Supply and install 3.0mm thick and 80 cmX 80 cm galvanized

Install inlet, outlet, drain, overflow, vent pipe and other

TESTING AND COMMISSIONING

Test the reservoir for water tightness and disinfect with