Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    Inspection & Testing Requirements Scope:: Test and Inspection Per

    Uploaded by

    mahmoud hegazy
    inspection form

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Inspection & Testing Requirements Scope:: Test and Inspection Per

    Uploaded by

    mahmoud hegazy
    8 views2 pages
    inspection form

    Original Title

    175-341800

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    inspection form

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views2 pages

    Inspection & Testing Requirements Scope:: Test and Inspection Per

    Uploaded by

    mahmoud hegazy
    inspection form

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    INSPECTION & TESTING REQUIREMENTS REVISION: 01/17/2019 CODE NUMBER: PAGE:

    SAUDI ARAMCO FORM-175 REPLACES: 12/12/2018 IR341800 1 of 2


    SCOPE: VALVE: Vacuum & Low Pressure Relief.
    (Less than 15 Psig).

    TEST AND INSPECTION PER: API-2000 as applicable and Specifications as noted below.

    (1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE


    (2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
    (3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
    0010
    0010
    *** R X
    Pre-Fabrication/Production Requirements
    Raw Material Test Reports
    Specification Details / Notes:
    For all major wetted parts, including actual hardness tests for
    materials required to meet ISO 15156 / NACE MR0175 (for sour
    service only)

    0020 R X Data Sheet & Drawings Verify Company concurrence of the final / vendor completed
    ISS

    0020
    0010
    *** R
    In process inspection & test requirement
    Production Tests
    Specification Details / Notes:
    As required by API-2000 Sec 5.4

    0020 R X Hardness Testing of Wetted Parts If sour service is specified in P.O., per ISO 15156 / NACE
    MR0175 or NACE MR0103, as applicable

    0030 R X 100% radiography of butt welds Applies to bodies, bonnets, and yokes, if weld repair is done

    0040 R X Radiography of cast bodies As per MSS-SP-54, only if specified in the Purchase order
    (P.O.)

    0030
    0010
    ***
    H X
    Final inspection & test requirements
    Visual and Dimensional Inspection
    Specification Details / Notes:

    0020 W Popping/Set Pressure test As specified in the P.O. and/or API-2000 Sec 5.4

    0030 W Seat tightness/Leakage test As per API-2000 Sec 5.4

    0040 R X Preparation for Shipment Proper Protection against damage

    0050 R X Marking of Venting Devices As per API-2000 Sec 6

    0060 R X Product test certificates and records

    0070 R X Certificate of compliance

    Notes:
    IR341800 Continued...
    INSPECTION & TESTING REQUIREMENTS REVISION: 01/17/2019 CODE NUMBER: PAGE:
    SAUDI ARAMCO FORM-175 REPLACES: 12/12/2018 IR341800 2 of 2
    (1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE
    (2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
    (3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
    (1) May only be waived by the responsible Saudi Aramco, ASC, AOC Inspection Offices.
    (2) Refer detailed instruction sheet SA175 form IR000003 of inspection requirement for ideal use of this form.

    End of IR341800

    You might also like